X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fconfigs%2Ftcm-bf537.h;h=a8947c5934917933f9673333cc8c3de73571ea84;hb=be065a50336ee2d3258ab25bd2c90fdd56855351;hp=5a5fbddac354337010060a41293a6a0c515d7b68;hpb=b097d552bc9ee0351bb0c3d1219856e845df59f9;p=karo-tx-uboot.git

diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 5a5fbddac3..a8947c5934 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -55,24 +55,22 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
 /*
  * Network Settings
  */
-/* TCM-BF537E has no PHY on it, but EXT-BF5xx-USB/Ethernet board has */
 #ifndef __ADSPBF534__
 #define ADI_CMDS_NETWORK	1
 #define CONFIG_BFIN_MAC
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_BASE	0x20308000
+#define CONFIG_SMC911X_16_BIT
 #define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 #endif
 #define CONFIG_HOSTNAME		tcm-bf537
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-
 
 /*
  * Flash Settings
@@ -86,17 +84,23 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	67
 
 
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+
+
 /*
  * Env Storage Settings
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	0x4000
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_OFFSET	0x8000
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_SECT_SIZE	0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
-#else
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -105,25 +109,27 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-	cpu/blackfin/traps.o		(.text .text.*); \
-	cpu/blackfin/interrupt.o	(.text .text.*); \
-	cpu/blackfin/serial.o		(.text .text.*); \
-	common/dlmalloc.o		(.text .text.*); \
-	lib_generic/crc32.o		(.text .text.*); \
+	arch/blackfin/lib/built-in.o (.text*); \
+	arch/blackfin/cpu/built-in.o (.text*); \
 	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o		(.text .text.*);
+	common/env_embedded.o (.text*);
 #endif
 
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
+/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+
 /*
  * Misc Settings
  */
@@ -133,9 +139,9 @@
 #define CONFIG_UART_CONSOLE	0
 #define CONFIG_BOOTCOMMAND	"run flashboot"
 #define FLASHBOOT_ENV_SETTINGS \
-	"flashboot=flread 20040000 1000000 280000;" \
+	"flashboot=flread 20040000 1000000 300000;" \
 	"bootm 0x1000000\0"
-
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 /*
  * Pull in common ADI header for remaining command/environment setup