X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Ffdt_support.h;h=e9f3497ab64216a0aaf396e7e64e42535de2ccc9;hb=c6c7153d25fb841c22883cb6c86cd3d763a6dbc3;hp=55cef94358bcd9ed1db349493941addc901d1ff4;hpb=2db8c2d61a05bb4a94bb341329c6de811757c111;p=karo-tx-uboot.git

diff --git a/include/fdt_support.h b/include/fdt_support.h
index 55cef94358..e9f3497ab6 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -16,8 +16,35 @@ u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
 				const char *prop, const u32 dflt);
 u32 fdt_getprop_u32_default(const void *fdt, const char *path,
 				const char *prop, const u32 dflt);
+
+/**
+ * Add data to the root of the FDT before booting the OS.
+ *
+ * See doc/device-tree-bindings/root.txt
+ *
+ * @param fdt		FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_root(void *fdt);
+
+/**
+ * Add chosen data the FDT before booting the OS.
+ *
+ * In particular, this adds the kernel command line (bootargs) to the FDT.
+ *
+ * @param fdt		FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
 int fdt_chosen(void *fdt);
+
+/**
+ * Add initrd information to the FDT before booting the OS.
+ *
+ * @param fdt		FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
+
 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
 		      const void *val, int len, int create);
 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
@@ -40,18 +67,57 @@ void do_fixup_by_compat(void *fdt, const char *compat,
 			const char *prop, const void *val, int len, int create);
 void do_fixup_by_compat_u32(void *fdt, const char *compat,
 			    const char *prop, u32 val, int create);
+/**
+ * Setup the memory node in the DT. Creates one if none was existing before.
+ * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
+ * whole memory.
+ *
+ * @param blob		FDT blob to update
+ * @param start		Begin of DRAM mapping in physical memory
+ * @param size		Size of the single memory bank
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
 int fdt_fixup_memory(void *blob, u64 start, u64 size);
+
+/**
+ * Fill the DT memory node with multiple memory banks.
+ * Creates the node if none was existing before.
+ * If banks is 0, it will not touch the existing reg property. This allows
+ * boards to not mess with the existing DT setup, which may have been
+ * filled in properly before.
+ *
+ * @param blob		FDT blob to update
+ * @param start		Array of size <banks> to hold the start addresses.
+ * @param size		Array of size <banks> to hold the size of each region.
+ * @param banks		Number of memory banks to create. If 0, the reg
+ *			property will be left untouched.
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
+
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 			 const void *val, int len, int create);
 void fdt_fixup_qe_firmware(void *fdt);
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+/**
+ * Update native-mode property of display-timings node to the phandle
+ * of the timings matching a display by name (case insensitive).
+ *
+ * see kernel Documentation/devicetree/bindings/video/display-timing.txt
+ *
+ * @param blob		FDT blob to update
+ * @param path		path within dt
+ * @param display	name of display timing to match
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_fixup_display(void *blob, const char *path, const char *display);
+
+#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
 void fdt_fixup_dr_usb(void *blob, bd_t *bd);
 #else
 static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
 
 #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
 void fdt_fixup_crypto_node(void *blob, int sec_rev);
@@ -64,7 +130,20 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
 #endif
 
-void ft_board_setup(void *blob, bd_t *bd);
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * Add board-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_BOARD_SETUP is defined
+ *
+ * @param blob		FDT blob to update
+ * @param bd_t		Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_board_setup(void *blob, bd_t *bd);
+
 /*
  * The keystone2 SOC requires all 32 bit aliased addresses to be converted
  * to their 36 physical format. This has to happen after all fdt nodes
@@ -75,15 +154,34 @@ void ft_board_setup_ex(void *blob, bd_t *bd);
 void ft_cpu_setup(void *blob, bd_t *bd);
 void ft_pci_setup(void *blob, bd_t *bd);
 
-void set_working_fdt_addr(void *addr);
+/**
+ * Add system-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
+ *
+ * @param blob		FDT blob to update
+ * @param bd_t		Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_system_setup(void *blob, bd_t *bd);
+
+void set_working_fdt_addr(ulong addr);
 int fdt_shrink_to_minimum(void *blob);
 int fdt_increase_size(void *fdt, int add_len);
 
 int fdt_fixup_nor_flash_size(void *blob);
 
+#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
+#else
+static inline void fdt_fixup_mtdparts(void *fdt, void *node_info,
+					int node_info_size) {}
+#endif
+
 void fdt_del_node_and_alias(void *blob, const char *alias);
-u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
+u64 fdt_translate_address(const void *blob, int node_offset,
+			  const __be32 *in_addr);
 int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
 					phys_addr_t compat_off);
 int fdt_alloc_phandle(void *blob);
@@ -142,11 +240,14 @@ static inline u64 of_read_number(const fdt32_t *cell, int size)
 	return r;
 }
 
-void of_bus_default_count_cells(void *blob, int parentoffset,
+void of_bus_default_count_cells(const void *blob, int parentoffset,
 					int *addrc, int *sizec);
 int ft_verify_fdt(void *fdt);
 int arch_fixup_memory_node(void *blob);
 
+int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
+			    u32 height, u32 stride, const char *format);
+
 #endif /* ifdef CONFIG_OF_LIBFDT */
 
 #ifdef USE_HOSTCC