X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Ffsl_ddr_sdram.h;h=e5b6e03c8fd7a569d07045270f32adef4528e0f1;hb=13a3e2ee237f515af5738c07aaf604db9b54be34;hp=5b03c14c55db3f29741a4d7831c6093aa156b1c5;hpb=be9f643ae6aa9044c60fe80e3a2c10be8371c692;p=karo-tx-uboot.git

diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 5b03c14c55..e5b6e03c8f 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -114,6 +114,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define SDRAM_CFG_2T_EN			0x00008000
 #define SDRAM_CFG_BI			0x00000001
 
+#define SDRAM_CFG2_FRC_SR		0x80000000
 #define SDRAM_CFG2_D_INIT		0x00000010
 #define SDRAM_CFG2_ODT_CFG_MASK		0x00600000
 #define SDRAM_CFG2_ODT_NEVER		0
@@ -154,6 +155,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define MD_CNTL_CKE_CNTL_HIGH	0x00200000
 #define MD_CNTL_WRCW		0x00080000
 #define MD_CNTL_MD_VALUE(x)	(x & 0x0000FFFF)
+#define MD_CNTL_CS_SEL(x)	(((x) & 0x7) << 28)
+#define MD_CNTL_MD_SEL(x)	(((x) & 0xf) << 24)
 
 /* DDR_CDR1 */
 #define DDR_CDR1_DHC_EN	0x80000000
@@ -163,6 +166,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
 #define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
 #define DDR_CDR2_VREF_OVRD(x)	(0x00008080 | ((((x) - 37) & 0x3F) << 8))
+#define DDR_CDR2_VREF_TRAIN_EN	0x00000080
+#define DDR_CDR2_VREF_RANGE_2	0x00000040
 
 #if (defined(CONFIG_SYS_FSL_DDR_VER) && \
 	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@@ -202,6 +207,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
 #define DDR_CDR_ODT_120ohm	0x6
 #endif
 
+#define DDR_INIT_ADDR_EXT_UIA	(1 << 31)
+
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
 	struct {
@@ -414,9 +421,11 @@ static int __board_need_mem_reset(void)
 int board_need_mem_reset(void)
 	__attribute__((weak, alias("__board_need_mem_reset")));
 
-void __weak board_mem_sleep_setup(void)
-{
-}
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void);
+bool is_warm_boot(void);
+int fsl_dp_resume(void);
+#endif
 
 /*
  * The 85xx boards have a common prototype for fixed_sdram so put the