X-Git-Url: https://git.karo-electronics.de/?a=blobdiff_plain;f=include%2Fstatus_led.h;h=a5e35df80ac1b13db6d82137a34c71f8ca63c9d5;hb=88914836fa30e167183603974d5bd29dd04102bd;hp=c1d2242b9dbcc14a2d663fce373f4f902386be9e;hpb=7bee1c91a94db19bd26f92cc67be35d3592c6429;p=karo-tx-uboot.git

diff --git a/include/status_led.h b/include/status_led.h
index c1d2242b9d..a5e35df80a 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -56,83 +56,6 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  IVMS8  **********************************************************/
-#elif defined(CONFIG_IVMS8)
-
-# define STATUS_LED_PAR		im_cpm.cp_pbpar
-# define STATUS_LED_DIR		im_cpm.cp_pbdir
-# define STATUS_LED_ODR		im_cpm.cp_pbodr
-# define STATUS_LED_DAT		im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
-# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE	STATUS_LED_OFF
-# define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
-# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1	STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
-# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2	STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
-
-# define STATUS_ILOCK_SWITCH	0x00800000	/* ILOCK switch in IRQ4	*/
-
-# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/
-
-# define STATUS_LED_YELLOW	0
-# define STATUS_LED_GREEN	1
-# define STATUS_LED_BOOT	2		/* IDE LED used for boot status */
-
-/*****  IVML24  *********************************************************/
-#elif defined(CONFIG_IVML24)
-
-# define STATUS_LED_PAR		im_cpm.cp_pbpar
-# define STATUS_LED_DIR		im_cpm.cp_pbdir
-# define STATUS_LED_ODR		im_cpm.cp_pbodr
-# define STATUS_LED_DAT		im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
-# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE	STATUS_LED_OFF
-# define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
-# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1	STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
-# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2	STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
-
-# define STATUS_ILOCK_SWITCH	0x00004000	/* ILOCK is on PB.17	*/
-
-# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/
-
-# define STATUS_LED_YELLOW	0
-# define STATUS_LED_GREEN	1
-# define STATUS_LED_BOOT	2		/* IDE LED used for boot status */
-
-/*****  ICU862   ********************************************************/
-#elif defined(CONFIG_ICU862)
-
-# define STATUS_LED_PAR		im_ioport.iop_papar
-# define STATUS_LED_DIR		im_ioport.iop_padir
-# define STATUS_LED_ODR		im_ioport.iop_paodr
-# define STATUS_LED_DAT		im_ioport.iop_padat
-
-# define STATUS_LED_BIT		0x4000		/* LED 0 is on PA.1 */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-# define STATUS_LED_BIT1	0x1000		/* LED 1 is on PA.3 */
-# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1	STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
-
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  Someone else defines these  *************************************/
 #elif defined(STATUS_LED_PAR)
 
@@ -141,29 +64,6 @@ void status_led_set  (int led, int state);
    * filling this file up with lots of custom board stuff.
    */
 
-/*****  NetVia   ********************************************************/
-#elif defined(CONFIG_NETVIA)
-
-#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
-
-#define STATUS_LED_PAR		im_ioport.iop_pdpar
-#define STATUS_LED_DIR		im_ioport.iop_pddir
-#undef  STATUS_LED_ODR
-#define STATUS_LED_DAT		im_ioport.iop_pddat
-
-# define STATUS_LED_BIT		0x0080			/* PD.8 */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_BIT1	0x0040			/* PD.9 */
-# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE1	STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
-#endif
-
 /*****  CMI   ********************************************************/
 #elif defined(CONFIG_CMI)
 # define STATUS_LED_DIR		im_mios.mios_mpiosm32ddr
@@ -177,22 +77,6 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  KUP4K, KUP4X  ****************************************************/
-#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
-
-# define STATUS_LED_PAR		im_ioport.iop_papar
-# define STATUS_LED_DIR		im_ioport.iop_padir
-# define STATUS_LED_ODR		im_ioport.iop_paodr
-# define STATUS_LED_DAT		im_ioport.iop_padat
-
-# define STATUS_LED_BIT		0x00000300  /*  green + red    PA[8]=yellow,  PA[7]=red,  PA[6]=green */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
-
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
@@ -221,6 +105,7 @@ typedef unsigned long led_id_t;
 extern void __led_toggle (led_id_t mask);
 extern void __led_init (led_id_t mask, int state);
 extern void __led_set (led_id_t mask, int state);
+void __led_blink(led_id_t mask, int freq);
 #else
 # error Status LED configuration missing
 #endif