]> git.karo-electronics.de Git - karo-tx-linux.git/commit
MIPS: BCM63XX: add support for BCM3368 Cable Modem
authorFlorian Fainelli <florian@openwrt.org>
Tue, 18 Jun 2013 16:55:40 +0000 (16:55 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 20 Jun 2013 14:58:07 +0000 (16:58 +0200)
commit31c761c9c1fa91bf4ed83d75dcbc4e426ea2b670
tree1dc69499f27f9ec6996dceaab21f2da24a31018c
parent373eb1a286bf31b41f966d5d3826cfe63e826c92
MIPS: BCM63XX: add support for BCM3368 Cable Modem

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:

- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash

The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 files changed:
arch/mips/bcm63xx/Kconfig
arch/mips/bcm63xx/clk.c
arch/mips/bcm63xx/cpu.c
arch/mips/bcm63xx/dev-flash.c
arch/mips/bcm63xx/dev-spi.c
arch/mips/bcm63xx/dev-uart.c
arch/mips/bcm63xx/irq.c
arch/mips/bcm63xx/prom.c
arch/mips/bcm63xx/reset.c
arch/mips/bcm63xx/setup.c
arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
arch/mips/include/asm/mach-bcm63xx/ioremap.h
arch/mips/pci/pci-bcm63xx.c