Driver maintains its primary MAC in a private field which
gets updated when ndo_dev_set_mac() gets called.
However, there are flows where the primary MAC of the device can change
without said NDO being called [bond device in TLB mode configuring
slaves' addresses], resulting in a configuration where there's a mismatch
between what's apparent to user [the netdevice's value] and what's
configured in the HW [the private value].
As we don't have any real motivation of maintaining this
private field, simply remove it and start using the netdevice's
field instead.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
#define QEDE_TSS_COUNT(edev) ((edev)->num_queues - (edev)->fp_num_rx)
struct qed_int_info int_info;
#define QEDE_TSS_COUNT(edev) ((edev)->num_queues - (edev)->fp_num_rx)
struct qed_int_info int_info;
- unsigned char primary_mac[ETH_ALEN];
/* Smaller private varaiant of the RTNL lock */
struct mutex qede_lock;
/* Smaller private varaiant of the RTNL lock */
struct mutex qede_lock;
{
struct qede_dev *edev = dev;
{
struct qede_dev *edev = dev;
/* MAC hints take effect only if we haven't set one already */
/* MAC hints take effect only if we haven't set one already */
- if (is_valid_ether_addr(edev->ndev->dev_addr) && !forced)
+ if (is_valid_ether_addr(edev->ndev->dev_addr) && !forced) {
+ __qede_unlock(edev);
ether_addr_copy(edev->ndev->dev_addr, mac);
ether_addr_copy(edev->ndev->dev_addr, mac);
- ether_addr_copy(edev->primary_mac, mac);
}
void qede_fill_rss_params(struct qede_dev *edev,
}
void qede_fill_rss_params(struct qede_dev *edev,
{
struct qede_dev *edev = netdev_priv(ndev);
struct sockaddr *addr = p;
{
struct qede_dev *edev = netdev_priv(ndev);
struct sockaddr *addr = p;
- int rc;
-
- ASSERT_RTNL(); /* @@@TBD To be removed */
- DP_INFO(edev, "Set_mac_addr called\n");
+ /* Make sure the state doesn't transition while changing the MAC.
+ * Also, all flows accessing the dev_addr field are doing that under
+ * this lock.
+ */
+ __qede_lock(edev);
if (!is_valid_ether_addr(addr->sa_data)) {
DP_NOTICE(edev, "The MAC address is not valid\n");
if (!is_valid_ether_addr(addr->sa_data)) {
DP_NOTICE(edev, "The MAC address is not valid\n");
+ rc = -EFAULT;
+ goto out;
}
if (!edev->ops->check_mac(edev->cdev, addr->sa_data)) {
}
if (!edev->ops->check_mac(edev->cdev, addr->sa_data)) {
- DP_NOTICE(edev, "qed prevents setting MAC\n");
- return -EINVAL;
+ DP_NOTICE(edev, "qed prevents setting MAC %pM\n",
+ addr->sa_data);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (edev->state == QEDE_STATE_OPEN) {
+ /* Remove the previous primary mac */
+ rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
+ ndev->dev_addr);
+ if (rc)
+ goto out;
}
ether_addr_copy(ndev->dev_addr, addr->sa_data);
}
ether_addr_copy(ndev->dev_addr, addr->sa_data);
+ DP_INFO(edev, "Setting device MAC to %pM\n", addr->sa_data);
- if (!netif_running(ndev)) {
- DP_NOTICE(edev, "The device is currently down\n");
- return 0;
+ if (edev->state != QEDE_STATE_OPEN) {
+ DP_VERBOSE(edev, NETIF_MSG_IFDOWN,
+ "The device is currently down\n");
+ goto out;
- /* Remove the previous primary mac */
- rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_DEL,
- edev->primary_mac);
- if (rc)
- return rc;
-
- edev->ops->common->update_mac(edev->cdev, addr->sa_data);
+ edev->ops->common->update_mac(edev->cdev, ndev->dev_addr);
- /* Add MAC filter according to the new unicast HW MAC address */
- ether_addr_copy(edev->primary_mac, ndev->dev_addr);
- return qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
- edev->primary_mac);
+ rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_ADD,
+ ndev->dev_addr);
+out:
+ __qede_unlock(edev);
+ return rc;
* (configrue / leave the primary mac)
*/
rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
* (configrue / leave the primary mac)
*/
rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
goto err4;
DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n");
goto err4;
DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n");
- /* Add primary mac and set Rx filters */
- ether_addr_copy(edev->primary_mac, edev->ndev->dev_addr);
-
/* Program un-configured VLANs */
qede_configure_vlan_filters(edev);
/* Program un-configured VLANs */
qede_configure_vlan_filters(edev);