- struct wm8775_state *state = i2c_get_clientdata(client);
- struct v4l2_routing *route = arg;
- struct v4l2_control *ctrl = arg;
-
- switch (cmd) {
- case VIDIOC_INT_G_AUDIO_ROUTING:
- route->input = state->input;
- route->output = 0;
- break;
-
- case VIDIOC_INT_S_AUDIO_ROUTING:
- /* There are 4 inputs and one output. Zero or more inputs
- are multiplexed together to the output. Hence there are
- 16 combinations.
- If only one input is active (the normal case) then the
- input values 1, 2, 4 or 8 should be used. */
- if (route->input > 15) {
- v4l_err(client, "Invalid input %d.\n", route->input);
- return -EINVAL;
- }
- state->input = route->input;
- if (state->muted)
- break;
- wm8775_write(client, R21, 0x0c0);
- wm8775_write(client, R14, 0x1d4);
- wm8775_write(client, R15, 0x1d4);
- wm8775_write(client, R21, 0x100 + state->input);
- break;
-
- case VIDIOC_G_CTRL:
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- ctrl->value = state->muted;
- break;
-
- case VIDIOC_S_CTRL:
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- state->muted = ctrl->value;
- wm8775_write(client, R21, 0x0c0);
- wm8775_write(client, R14, 0x1d4);
- wm8775_write(client, R15, 0x1d4);
- if (!state->muted)
- wm8775_write(client, R21, 0x100 + state->input);
- break;
-
- case VIDIOC_G_CHIP_IDENT:
- return v4l2_chip_ident_i2c_client(client,
- arg, V4L2_IDENT_WM8775, 0);
-
- case VIDIOC_LOG_STATUS:
- v4l_info(client, "Input: %d%s\n", state->input,
- state->muted ? " (muted)" : "");
- break;
-
- case VIDIOC_S_FREQUENCY:
- /* If I remove this, then it can happen that I have no
- sound the first time I tune from static to a valid channel.
- It's difficult to reproduce and is almost certainly related
- to the zero cross detect circuit. */
- wm8775_write(client, R21, 0x0c0);
- wm8775_write(client, R14, 0x1d4);
- wm8775_write(client, R15, 0x1d4);
- wm8775_write(client, R21, 0x100 + state->input);
- break;
-
- default: