This patch fixes sparse warnings due non declarations of static functions.
arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static?
arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static?
arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static?
arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static?
drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static?
Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
-#include <mach/board-flash.h>
-
+#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
-#include <mach/board-flash.h>
+#include "board-flash.h"
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#include <plat/board.h>
#include <plat/common.h>
#include <plat/control.h>
-#include <plat/timer-gp.h>
#include <plat/usb.h>
#include <plat/mmc.h>
+
#include "hsmmc.h"
+#include "timer-gp.h"
#define ETH_KS8851_IRQ 34
#define ETH_KS8851_POWER_ON 48
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
-void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
{
unsigned int regval;
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
-#include <plat/timer-gp.h>
#include <plat/display.h>
#include <plat/mcspi.h>
#include "mux.h"
#include "hsmmc.h"
+#include "timer-gp.h"
#define NAND_BLOCK_SIZE SZ_128K
#include <plat/nand.h>
#include <plat/onenand.h>
#include <plat/tc.h>
-#include <mach/board-flash.h>
+
+#include "board-flash.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM]);
+extern void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs);
},
};
-void __init igep2_flash_init(void)
+static void __init igep2_flash_init(void)
{
u8 cs = 0;
u8 onenandcs = GPMC_CS_NUM + 1;
}
#else
-void __init igep2_flash_init(void) {}
+static void __init igep2_flash_init(void) {}
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <plat/control.h>
#include <plat/usb.h>
+#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
omap_mmc_notify_cover_event(mmc_device, index, *openp);
}
-void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
-{
- if (mmc_device == NULL)
- return;
-
- slot1_cover_open = !closed_state;
- omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
-}
-
static int n8x0_mmc_late_init(struct device *dev)
{
int r, bit, *openp;
static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
-void __init n8x0_mmc_init(void)
+static void __init n8x0_mmc_init(void)
{
int err;
void __init n8x0_mmc_init(void)
{
}
-
-void n8x0_mmc_slot1_cover_handler(void *arg, int state)
-{
-}
-
#endif /* CONFIG_MMC_OMAP */
#ifdef CONFIG_MENELAUS
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
-#include <plat/timer-gp.h>
#include "mux.h"
#include "hsmmc.h"
+#include "timer-gp.h"
#define NAND_BLOCK_SIZE SZ_128K
#include "mux.h"
#include "hsmmc.h"
+#include "timer-gp.h"
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
-#include <plat/timer-gp.h>
#include <plat/sdrc.h>
#include <plat/control.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
-#include <plat/timer-gp.h>
#include <plat/display.h>
#include <plat/mcspi.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
+#include "timer-gp.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#define OMAP3STALKER_ETHR_START 0x2c000000
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
-#include <plat/timer-gp.h>
#include "mux.h"
#include "hsmmc.h"
+#include "timer-gp.h"
#include <asm/setup.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/control.h>
-#include <plat/timer-gp.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include "hsmmc.h"
+#include "timer-gp.h"
static struct gpio_led gpio_leds[] = {
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
+#include <mach/board-rx51.h>
+
#include <sound/tlv320aic3x.h>
#include <sound/tpa6130a2-plat.h>
#include <plat/vram.h>
#include <plat/mcspi.h>
+#include <mach/board-rx51.h>
+
#include "mux.h"
#define RX51_LCD_RESET_GPIO 90
#include <plat/gpmc.h>
+#include <mach/board-zoom.h>
+
#define ZOOM_SMSC911X_CS 7
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
#include <plat/common.h>
#include <plat/usb.h>
+#include <mach/board-zoom.h>
+
#include "mux.h"
#include "hsmmc.h"
#include <mach/board-zoom.h>
+#include "board-flash.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include <plat/board.h>
#include <plat/usb.h>
+#include "board-flash.h"
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
--- /dev/null
+/*
+ * Defines for rx51 boards
+ */
+
+#ifndef _OMAP_BOARD_RX51_H
+#define _OMAP_BOARD_RX51_H
+
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_video_mem_init(void);
+
+#endif
/*
* Defines for zoom boards
*/
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
#define ZOOM_NAND_CS 0
-extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs);
extern int __init zoom_debugboard_init(void);
extern void __init zoom_peripherals_init(void);
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
+#include "timer-gp.h"
+
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-int __init omap2_gp_clockevent_set_gptimer(u8 id);
+extern int __init omap2_gp_clockevent_set_gptimer(u8 id);
#endif
-
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
#endif