USB: OTG: msm: Add PHY suspend support for MSM8960

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/otg/msm_otg.c
index 628ba7d943da57760319701067ecfafec5ef6010..1cdda6c0523887d50a805e95bf22199ef8486063 100644 (file)
--- a/drivers/usb/otg/msm_otg.c
+++ b/drivers/usb/otg/msm_otg.c
@@ -163,6 +163,32 @@ put_3p3:
        return rc;
 }
 
+#ifdef CONFIG_PM_SLEEP
+#define USB_PHY_SUSP_DIG_VOL  500000
+static int msm_hsusb_config_vddcx(int high)
+{
+       int max_vol = USB_PHY_VDD_DIG_VOL_MAX;
+       int min_vol;
+       int ret;
+
+       if (high)
+               min_vol = USB_PHY_VDD_DIG_VOL_MIN;
+       else
+               min_vol = USB_PHY_SUSP_DIG_VOL;
+
+       ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol);
+       if (ret) {
+               pr_err("%s: unable to set the voltage for regulator "
+                       "HSUSB_VDDCX\n", __func__);
+               return ret;
+       }
+
+       pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+       return ret;
+}
+#endif
+
 static int msm_hsusb_ldo_set_mode(int on)
 {
        int ret = 0;
@@ -434,27 +460,28 @@ static int msm_otg_suspend(struct msm_otg *motg)
 
        disable_irq(motg->irq);
        /*
+        * Chipidea 45-nm PHY suspend sequence:
+        *
         * Interrupt Latch Register auto-clear feature is not present
         * in all PHY versions. Latch register is clear on read type.
         * Clear latch register to avoid spurious wakeup from
         * low power mode (LPM).
-        */
-       ulpi_read(otg, 0x14);
-
-       /*
+        *
         * PHY comparators are disabled when PHY enters into low power
         * mode (LPM). Keep PHY comparators ON in LPM only when we expect
         * VBUS/Id notifications from USB PHY. Otherwise turn off USB
         * PHY comparators. This save significant amount of power.
-        */
-       if (pdata->otg_control == OTG_PHY_CONTROL)
-               ulpi_write(otg, 0x01, 0x30);
-
-       /*
+        *
         * PLL is not turned off when PHY enters into low power mode (LPM).
         * Disable PLL for maximum power savings.
         */
-       ulpi_write(otg, 0x08, 0x09);
+
+       if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
+               ulpi_read(otg, 0x14);
+               if (pdata->otg_control == OTG_PHY_CONTROL)
+                       ulpi_write(otg, 0x01, 0x30);
+               ulpi_write(otg, 0x08, 0x09);
+       }
 
        /*
         * PHY may take some time or even fail to enter into low power
@@ -485,6 +512,10 @@ static int msm_otg_suspend(struct msm_otg *motg)
         */
        writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
 
+       if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+                       motg->pdata->otg_control == OTG_PMIC_CONTROL)
+               writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
+
        clk_disable(motg->pclk);
        clk_disable(motg->clk);
        if (motg->core_clk)
@@ -493,6 +524,12 @@ static int msm_otg_suspend(struct msm_otg *motg)
        if (!IS_ERR(motg->pclk_src))
                clk_disable(motg->pclk_src);
 
+       if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+                       motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+               msm_hsusb_ldo_set_mode(0);
+               msm_hsusb_config_vddcx(0);
+       }
+
        if (device_may_wakeup(otg->dev))
                enable_irq_wake(motg->irq);
        if (bus)
@@ -524,6 +561,13 @@ static int msm_otg_resume(struct msm_otg *motg)
        if (motg->core_clk)
                clk_enable(motg->core_clk);
 
+       if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+                       motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+               msm_hsusb_ldo_set_mode(1);
+               msm_hsusb_config_vddcx(1);
+               writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL);
+       }
+
        temp = readl(USB_USBCMD);
        temp &= ~ASYNC_INTR_CTRL;
        temp &= ~ULPI_STP_CTRL;

diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index 7d1babbff0716b59f6a7f9b03f9462e2717e43c9..6e97a2d3d39fbb0d7e2d70be26bcc5e225045c2d 100644 (file)
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -24,6 +24,7 @@
 #define USB_PORTSC           (MSM_USB_BASE + 0x0184)
 #define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
 #define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
+#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
 
 #define USBCMD_RESET   2
 #define USB_USBINTR          (MSM_USB_BASE + 0x0148)
@@ -42,6 +43,7 @@
 
 #define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
 #define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
+#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
 
 /* OTG definitions */
 #define OTGSC_INTSTS_MASK      (0x7f << 16)