#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "devices.h"
/*
* Resource definition for the MXC IrDA
[0] = {
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
},
[1] = {
.chip.label = "gpio-1",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
},
[2] = {
.chip.label = "gpio-2",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
},
[3] = {
.chip.label = "gpio-3",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
},
[4] = {
.chip.label = "gpio-4",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
},
[5] = {
.chip.label = "gpio-5",
- .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5),
+ .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
}
};
#include <linux/mm.h>
#include <linux/init.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
mx27_clocks_init(fref);
}
-struct sys_timer mx27ads_timer = {
+static struct sys_timer mx27ads_timer = {
.init = mx27ads_timer_init,
};
},
};
-void __init mx27ads_map_io(void)
+static void __init mx27ads_map_io(void)
{
mxc_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
mx27_clocks_init(26000000);
}
-struct sys_timer pcm038_timer = {
+static struct sys_timer pcm038_timer = {
.init = pcm038_timer_init,
};
#include <linux/serial.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
+#include "devices.h"
static struct resource uart0[] = {
{
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <mach/common.h>
int __init mxc_register_device(struct platform_device *pdev, void *data)
{
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xEB000000
-#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset))
+#define PBC_REG_ADDR(offset) (void __force __iomem *) \
+ (PBC_BASE_ADDRESS + (offset))
/*
* PBC Interupt name definitions
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
- (void __iomem *) \
+ (void __force __iomem *) \
(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
AIPI_IO_ADDRESS(x) : \
((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
static int __init mxc_clocksource_init(struct clk *timer_clk)
{
- unsigned int clock;
+ unsigned int c = clk_get_rate(timer_clk);
- clock = clk_get_rate(timer_clk);
-
- clocksource_mxc.mult = clocksource_hz2mult(clock,
+ clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
static int __init mxc_clockevent_init(struct clk *timer_clk)
{
- unsigned int clock;
-
- clock = clk_get_rate(timer_clk);
+ unsigned int c = clk_get_rate(timer_clk);
- clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
+ clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_mxc);