]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ti_usb_3410_5052: support alternate firmware
authorChris Adams <cmadams@hiwaay.net>
Sun, 11 Jan 2009 19:48:53 +0000 (19:48 +0000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 13 Jan 2009 00:37:01 +0000 (16:37 -0800)
The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/usb/serial/ti_usb_3410_5052.c

index 01d0c70d60e9b41129b44e76893958990f780b10..1cdb1515253d07f78a68c418071b3fe8055aea65 100644 (file)
@@ -145,7 +145,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
        __u8 mask, __u8 byte);
 
-static int ti_download_firmware(struct ti_device *tdev, int type);
+static int ti_download_firmware(struct ti_device *tdev);
 
 /* circular buffer */
 static struct circ_buf *ti_buf_alloc(void);
@@ -176,7 +176,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
        { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 };
@@ -188,7 +188,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
        { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[] = {
+static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
        { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
        { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
@@ -304,21 +304,28 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 
 static int __init ti_init(void)
 {
-       int i, j;
+       int i, j, c;
        int ret;
 
        /* insert extra vendor and product ids */
+       c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
        j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
-       for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
+       for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
                ti_id_table_3410[j].idVendor = vendor_3410[i];
                ti_id_table_3410[j].idProduct = product_3410[i];
                ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+               ti_id_table_combined[c].idVendor = vendor_3410[i];
+               ti_id_table_combined[c].idProduct = product_3410[i];
+               ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
        }
        j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
-       for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
+       for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
                ti_id_table_5052[j].idVendor = vendor_5052[i];
                ti_id_table_5052[j].idProduct = product_5052[i];
                ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+               ti_id_table_combined[c].idVendor = vendor_5052[i];
+               ti_id_table_combined[c].idProduct = product_5052[i];
+               ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
        }
 
        ret = usb_serial_register(&ti_1port_device);
@@ -390,11 +397,7 @@ static int ti_startup(struct usb_serial *serial)
 
        /* if we have only 1 configuration, download firmware */
        if (dev->descriptor.bNumConfigurations == 1) {
-               if (tdev->td_is_3410)
-                       status = ti_download_firmware(tdev, 3410);
-               else
-                       status = ti_download_firmware(tdev, 5052);
-               if (status)
+               if ((status = ti_download_firmware(tdev)) != 0)
                        goto free_tdev;
 
                /* 3410 must be reset, 5052 resets itself */
@@ -1671,9 +1674,9 @@ static int ti_do_download(struct usb_device *dev, int pipe,
        return status;
 }
 
-static int ti_download_firmware(struct ti_device *tdev, int type)
+static int ti_download_firmware(struct ti_device *tdev)
 {
-       int status = -ENOMEM;
+       int status;
        int buffer_size;
        __u8 *buffer;
        struct usb_device *dev = tdev->td_serial->dev;
@@ -1681,9 +1684,18 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
                tdev->td_serial->port[0]->bulk_out_endpointAddress);
        const struct firmware *fw_p;
        char buf[32];
-       sprintf(buf, "ti_usb-%d.bin", type);
 
-       if (request_firmware(&fw_p, buf, &dev->dev)) {
+       /* try ID specific firmware first, then try generic firmware */
+       sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
+           dev->descriptor.idProduct);
+       if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
+               if (tdev->td_is_3410)
+                       strcpy(buf, "ti_3410.fw");
+               else
+                       strcpy(buf, "ti_5052.fw");
+               status = request_firmware(&fw_p, buf, &dev->dev);
+       }
+       if (status) {
                dev_err(&dev->dev, "%s - firmware not found\n", __func__);
                return -ENOENT;
        }
@@ -1699,6 +1711,8 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
                memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
                status = ti_do_download(dev, pipe, buffer, fw_p->size);
                kfree(buffer);
+       } else {
+               status = -ENOMEM;
        }
        release_firmware(fw_p);
        if (status) {