* 7 FPU/R4k timer
*
* We handle the IRQ according to _our_ priority (see setup.c),
- * then we just return. If multiple IRQs are pending then we will
+ * then we just return. If multiple IRQs are pending then we will
* just take another exception, big deal.
*/
.align 5
/*
* Find irq with highest priority
*/
- PTR_LA t1,cpu_mask_nr_tbl
+ PTR_LA t1,cpu_mask_nr_tbl
1: lw t2,(t1)
nop
and t2,t0
/*
* Find irq with highest priority
*/
- PTR_LA t1,asic_mask_nr_tbl
+ PTR_LA t1,asic_mask_nr_tbl
2: lw t2,(t1)
nop
and t2,t0
FEXPORT(cpu_all_int) # HALT, timers, software junk
li a0,DEC_CPU_IRQ_BASE
srl t0,CAUSEB_IP
- li t1,CAUSEF_IP>>CAUSEB_IP # mask
+ li t1,CAUSEF_IP>>CAUSEB_IP # mask
b 1f
li t2,4 # nr of bits / 2
/* Maximum number of arguments supported. Must be even! */
#define O32_ARGC 32
-/* Number of static registers we save. */
+/* Number of static registers we save. */
#define O32_STATC 11
/* Frame size for both of the above. */
#define O32_FRAMESZ (4 * O32_ARGC + SZREG * O32_STATC)
if (prom_is_rex(magic))
rex_clear_cache();
- /* Register the early console. */
+ /* Register the early console. */
register_prom_console();
/* Were we compiled with the right CPU option? */
/*
* Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
- * off the end of real memory. Only suitable for the 2100/3100's (PMAX).
+ * off the end of real memory. Only suitable for the 2100/3100's (PMAX).
*/
#define CHUNK_SIZE 0x400000
/*
* IRQ routing and priority tables. Priorites are set as follows:
*
- * KN01 KN230 KN02 KN02-BA KN02-CA KN03
+ * KN01 KN230 KN02 KN02-BA KN02-CA KN03
*
* MEMORY CPU CPU CPU ASIC CPU CPU
* RTC CPU CPU CPU ASIC CPU CPU
/*
* Machine-specific initialisation for KN02-BA, aka DS5000/1xx
- * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka
+ * (xx = 20, 25, 33), aka 3min. Also applies to KN04(-BA), aka
* DS5000/150, aka 4min.
*/
static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {
#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */
#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
#define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */
-#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */
+#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */
#define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
/*
* System Control & Status Register bits.
*/
-#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */
-#define KN01_CSR_STATUS (1<<14) /* self-test result status output */
-#define KN01_CSR_PARDIS (1<<13) /* parity error disable */
-#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */
-#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */
-#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/
+#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS (1<<14) /* self-test result status output */
+#define KN01_CSR_PARDIS (1<<13) /* parity error disable */
+#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */
+#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/
#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */
#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */
#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */
#define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */
#define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */
-#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */
+#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */
#define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */
#define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */
#define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */
#ifdef CONFIG_64BIT
-#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
+#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
#else /* !CONFIG_64BIT */