obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
-qcom_tsens-y += tsens.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o
--- /dev/null
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8916 */
+#define BASE0_MASK 0x0000007f
+#define BASE1_MASK 0xfe000000
+#define BASE0_SHIFT 0
+#define BASE1_SHIFT 25
+
+#define S0_P1_MASK 0x00000f80
+#define S1_P1_MASK 0x003e0000
+#define S2_P1_MASK 0xf8000000
+#define S3_P1_MASK 0x000003e0
+#define S4_P1_MASK 0x000f8000
+
+#define S0_P2_MASK 0x0001f000
+#define S1_P2_MASK 0x07c00000
+#define S2_P2_MASK 0x0000001f
+#define S3_P2_MASK 0x00007c00
+#define S4_P2_MASK 0x01f00000
+
+#define S0_P1_SHIFT 7
+#define S1_P1_SHIFT 17
+#define S2_P1_SHIFT 27
+#define S3_P1_SHIFT 5
+#define S4_P1_SHIFT 15
+
+#define S0_P2_SHIFT 12
+#define S1_P2_SHIFT 22
+#define S2_P2_SHIFT 0
+#define S3_P2_SHIFT 10
+#define S4_P2_SHIFT 20
+
+#define CAL_SEL_MASK 0xe0000000
+#define CAL_SEL_SHIFT 29
+
+static int calibrate_8916(struct tsens_device *tmdev)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[5], p2[5];
+ int mode = 0;
+ u32 *qfprom_cdata, *qfprom_csel;
+
+ qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
+ if (IS_ERR(qfprom_csel))
+ return PTR_ERR(qfprom_csel);
+
+ mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+ dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+ p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 3);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[0] & BASE0_MASK);
+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 3);
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+const struct tsens_ops ops_8916 = {
+ .init = init_common,
+ .calibrate = calibrate_8916,
+ .get_temp = get_temp_common,
+};
--- /dev/null
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include "tsens.h"
+
+#define S0_ST_ADDR 0x1030
+#define SN_ADDR_OFFSET 0x4
+#define SN_ST_TEMP_MASK 0x3ff
+#define CAL_DEGC_PT1 30
+#define CAL_DEGC_PT2 120
+#define SLOPE_FACTOR 1000
+
+char *qfprom_read(struct device *dev, const char *cname)
+{
+ struct nvmem_cell *cell;
+ ssize_t data;
+ char *ret;
+
+ cell = nvmem_cell_get(dev, cname);
+ if (IS_ERR(cell))
+ return ERR_CAST(cell);
+
+ ret = nvmem_cell_read(cell, &data);
+ nvmem_cell_put(cell);
+ return ret;
+}
+
+void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
+ u32 *p2, u32 mode)
+{
+ int i;
+ int num, den;
+
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ dev_dbg(tmdev->dev,
+ "sensor%d - data_point1:%#x data_point2:%#x\n",
+ i, p1[i], p2[i]);
+
+ if (mode == TWO_PT_CALIB) {
+ /*
+ * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
+ * temp_120_degc - temp_30_degc (x2 - x1)
+ */
+ num = p2[i] - p1[i];
+ num *= SLOPE_FACTOR;
+ den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
+ tmdev->sensor[i].slope = num / den;
+ }
+
+ tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
+ (CAL_DEGC_PT1 *
+ tmdev->sensor[i].slope);
+ dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset);
+ }
+}
+
+static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
+{
+ int degc, num, den;
+
+ num = (adc_code * SLOPE_FACTOR) - s->offset;
+ den = s->slope;
+
+ if (num > 0)
+ degc = num + (den / 2);
+ else if (num < 0)
+ degc = num - (den / 2);
+ else
+ degc = num;
+
+ degc /= den;
+
+ return degc;
+}
+
+int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
+{
+ struct tsens_sensor *s = &tmdev->sensor[id];
+ u32 code;
+ unsigned int sensor_addr;
+ int last_temp = 0, ret;
+
+ sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+ ret = regmap_read(tmdev->map, sensor_addr, &code);
+ if (ret)
+ return ret;
+ last_temp = code & SN_ST_TEMP_MASK;
+
+ *temp = code_to_degc(last_temp, s) * 1000;
+
+ return 0;
+}
+
+static const struct regmap_config tsens_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+int init_common(struct tsens_device *tmdev)
+{
+ void __iomem *base;
+
+ base = of_iomap(tmdev->dev->of_node, 0);
+ if (IS_ERR(base))
+ return -EINVAL;
+
+ tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
+ if (!tmdev->map)
+ return -ENODEV;
+
+ return 0;
+}
static const struct of_device_id tsens_table[] = {
{
.compatible = "qcom,msm8916-tsens",
+ .data = &ops_8916,
}, {
.compatible = "qcom,msm8974-tsens",
},
#ifndef __QCOM_TSENS_H__
#define __QCOM_TSENS_H__
+#define ONE_PT_CALIB 0x1
+#define ONE_PT_CALIB2 0x2
+#define TWO_PT_CALIB 0x3
+
struct tsens_device;
struct tsens_sensor {
struct tsens_sensor sensor[0];
};
+char *qfprom_read(struct device *, const char *);
+void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
+int init_common(struct tsens_device *);
+int get_temp_common(struct tsens_device *, int, int *);
+
+extern const struct tsens_ops ops_8916;
+
#endif /* __QCOM_TSENS_H__ */
projects / karo-tx-linux.git / commitdiff