default y
select OMAP_PACKAGE_CBB
-config MACH_DEVKIT8000
- bool "DEVKIT8000 board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CUS
-
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
-config MACH_TOUCHBOOK
- bool "OMAP3 Touch Book"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_NOKIA_N810
bool
config MACH_CM_T3730
bool
-config MACH_SBC3530
- bool "OMAP3 SBC STALKER board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CUS
-
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
-obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o
-
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
# Platform specific device init code
+++ /dev/null
-/*
- * board-devkit8000.c - TimLL Devkit8000
- *
- * Copyright (C) 2009 Kim Botherway
- * Copyright (C) 2010 Thomas Weber
- *
- * Modified from mach-omap2/board-omap3beagle.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include "id.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/dm9000.h>
-#include <linux/interrupt.h>
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define NAND_CS 0
-
-#define OMAP_DM9000_GPIO_IRQ 25
-#define OMAP3_DEVKIT_TS_GPIO 27
-
-static struct mtd_partition devkit8000_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader",
- .offset = 0,
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot Env",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 1 * NAND_BLOCK_SIZE,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "File System",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply[] = {
- REGULATOR_SUPPLY("vcc", "spi2.0"),
-};
-
-static const struct display_timing devkit8000_lcd_videomode = {
- .pixelclock = { 0, 40000000, 0 },
-
- .hactive = { 0, 800, 0 },
- .hfront_porch = { 0, 1, 0 },
- .hback_porch = { 0, 1, 0 },
- .hsync_len = { 0, 48, 0 },
-
- .vactive = { 0, 480, 0 },
- .vfront_porch = { 0, 12, 0 },
- .vback_porch = { 0, 25, 0 },
- .vsync_len = { 0, 3, 0 },
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
- DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
- .name = "lcd",
- .source = "dpi.0",
-
- .data_lines = 24,
-
- .display_timing = &devkit8000_lcd_videomode,
-
- .enable_gpio = -1, /* filled in code */
- .backlight_gpio = -1,
-};
-
-static struct platform_device devkit8000_lcd_device = {
- .name = "panel-dpi",
- .id = 0,
- .dev.platform_data = &devkit8000_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 1,
-};
-
-static struct platform_device devkit8000_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &devkit8000_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1, /* filled in code */
-};
-
-static struct platform_device devkit8000_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &devkit8000_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data devkit8000_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device devkit8000_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &devkit8000_tv_pdata,
-};
-
-static struct omap_dss_board_info devkit8000_dss_data = {
- .default_display_name = "lcd",
-};
-
-static uint32_t board_keymap[] = {
- KEY(0, 0, KEY_1),
- KEY(1, 0, KEY_2),
- KEY(2, 0, KEY_3),
- KEY(0, 1, KEY_4),
- KEY(1, 1, KEY_5),
- KEY(2, 1, KEY_6),
- KEY(3, 1, KEY_F5),
- KEY(0, 2, KEY_7),
- KEY(1, 2, KEY_8),
- KEY(2, 2, KEY_9),
- KEY(3, 2, KEY_F6),
- KEY(0, 3, KEY_F7),
- KEY(1, 3, KEY_0),
- KEY(2, 3, KEY_F8),
- PERSISTENT_KEY(4, 5),
- KEY(4, 4, KEY_VOLUMEUP),
- KEY(5, 5, KEY_VOLUMEDOWN),
- 0
-};
-
-static struct matrix_keymap_data board_map_data = {
- .keymap = board_keymap,
- .keymap_size = ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data devkit8000_kp_data = {
- .keymap_data = &board_map_data,
- .rows = 6,
- .cols = 6,
- .rep = 1,
-};
-
-static struct gpio_led gpio_leds[];
-
-static int devkit8000_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
- /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
-
- /* gpio + 7 is "DVI_PD" (out, active low) */
- devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
- .use_leds = true,
- .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
- | BIT(15) | BIT(16) | BIT(17),
- .setup = devkit8000_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data devkit8000_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply),
- .consumer_supplies = devkit8000_vmmc1_supply,
-};
-
-/* VPLL1 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll1 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies),
- .consumer_supplies = devkit8000_vpll1_supplies,
-};
-
-/* VAUX4 for ads7846 and nubs */
-static struct regulator_init_data devkit8000_vio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply),
- .consumer_supplies = devkit8000_vio_supply,
-};
-
-static struct twl4030_platform_data devkit8000_twldata = {
- /* platform_data for children goes here */
- .gpio = &devkit8000_gpio_data,
- .vmmc1 = &devkit8000_vmmc1,
- .vpll1 = &devkit8000_vpll1,
- .vio = &devkit8000_vio,
- .keypad = &devkit8000_kp_data,
-};
-
-static int __init devkit8000_i2c_init(void)
-{
- omap3_pmic_get_config(&devkit8000_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC);
- omap3_pmic_init("tps65930", &devkit8000_twldata);
- /* Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 400, NULL, 0);
- return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .gpio = 186,
- .active_low = true,
- },
- {
- .name = "led2",
- .default_trigger = "mmc0",
- .gpio = 163,
- .active_low = true,
- },
- {
- .name = "ledB",
- .default_trigger = "none",
- .gpio = 153,
- .active_low = true,
- },
- {
- .name = "led3",
- .default_trigger = "none",
- .gpio = 164,
- .active_low = true,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_EXTRA,
- .gpio = 26,
- .desc = "user",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_key_info,
- },
-};
-
-#define OMAP_DM9000_BASE 0x2c000000
-
-static struct resource omap_dm9000_resources[] = {
- [0] = {
- .start = OMAP_DM9000_BASE,
- .end = (OMAP_DM9000_BASE + 0x4 - 1),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (OMAP_DM9000_BASE + 0x400),
- .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct dm9000_plat_data omap_dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device omap_dm9000_dev = {
- .name = "dm9000",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap_dm9000_resources),
- .resource = omap_dm9000_resources,
- .dev = {
- .platform_data = &omap_dm9000_platdata,
- },
-};
-
-static void __init omap_dm9000_init(void)
-{
- unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
- struct omap_die_id odi;
- int ret;
-
- ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq");
- if (ret < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
- OMAP_DM9000_GPIO_IRQ);
- return;
- }
-
- /* init the mac address using DIE id */
- omap_get_die_id(&odi);
-
- eth_addr[0] = 0x02; /* locally administered */
- eth_addr[1] = odi.id_1 & 0xff;
- eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
- eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
- eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
- eth_addr[5] = (odi.id_0 & 0x000000ff);
-}
-
-static struct platform_device *devkit8000_devices[] __initdata = {
- &leds_gpio,
- &keys_gpio,
- &omap_dm9000_dev,
- &devkit8000_lcd_device,
- &devkit8000_tfp410_device,
- &devkit8000_dvi_connector_device,
- &devkit8000_tv_connector_device,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* nCS and IRQ for Devkit8000 ethernet */
- OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
- OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
- /* McSPI 2*/
- OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* PENDOWN GPIO */
- OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
- /* mUSB */
- OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* USB 1 */
- OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-
- /* MMC 1 */
- OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* McBSP 2 */
- OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* I2C 1 */
- OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* I2C 2 */
- OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* I2C 3 */
- OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* I2C 4 */
- OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* serial ports */
- OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* DSS */
- OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* expansion port */
- /* McSPI 1 */
- OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
- /* HDQ */
- OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* McSPI4 */
- OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
- /* MMC 2 */
- OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
- /* I2C3 */
- OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
- OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
- /* TPS IRQ */
- OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
- OMAP_PIN_INPUT_PULLUP),
-
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init devkit8000_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-
- omap_dm9000_init();
-
- omap_hsmmc_init(mmc);
- devkit8000_i2c_init();
- omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
- platform_add_devices(devkit8000_devices,
- ARRAY_SIZE(devkit8000_devices));
-
- omap_display_init(&devkit8000_dss_data);
-
- omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
-
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- usbhs_init(&usbhs_bdata);
- board_nand_init(devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
- NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle", NULL);
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = devkit8000_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_secure_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Guangzhou EMA-Tech
- *
- * Modified from mach-omap2/board-omap3evm.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_data/at24.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include "gpmc-smsc911x.h"
-
-#define OMAP3STALKER_ETHR_START 0x2c000000
-#define OMAP3STALKER_ETHR_SIZE 1024
-#define OMAP3STALKER_ETHR_GPIO_IRQ 19
-#define OMAP3STALKER_SMC911X_CS 5
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
- .cs = OMAP3STALKER_SMC911X_CS,
- .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ,
- .gpio_reset = -EINVAL,
- .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
-};
-
-static inline void __init omap3stalker_init_eth(void)
-{
- omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
- gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3stalker_init_eth(void)
-{
- return;
-}
-#endif
-
-/*
- * OMAP3 DSS control signals
- */
-
-#define DSS_ENABLE_GPIO 199
-#define LCD_PANEL_BKLIGHT_GPIO 210
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-
-static void __init omap3_stalker_display_init(void)
-{
- return;
-}
-static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = -1,
-};
-
-static struct platform_device omap3stalker_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &omap3stalker_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = DSS_ENABLE_GPIO,
-};
-
-static struct platform_device omap3stalker_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &omap3stalker_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data omap3stalker_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
- .invert_polarity = false,
-};
-
-static struct platform_device omap3stalker_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &omap3stalker_tv_pdata,
-};
-
-static struct omap_dss_board_info omap3_stalker_dss_data = {
- .default_display_name = "dvi",
-};
-
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3stalker_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply),
- .consumer_supplies = omap3stalker_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3stalker_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply),
- .consumer_supplies = omap3stalker_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = 23,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_EXTRA,
- .gpio = 18,
- .desc = "user",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_key_info,
- },
-};
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "stalker:D8:usr0",
- .default_trigger = "default-on",
- .gpio = 126,
- },
- {
- .name = "stalker:D9:usr1",
- .default_trigger = "default-on",
- .gpio = 127,
- },
- {
- .name = "stalker:D3:mmc0",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- .default_trigger = "mmc0",
- },
- {
- .name = "stalker:D4:heartbeat",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- .default_trigger = "heartbeat",
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static int
-omap3stalker_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- /*
- * Most GPIOs are for USB OTG. Some are mostly sent to
- * the P2 connector; notably LEDA for the LCD backlight.
- */
-
- /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
- gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
- "EN_LCD_BKL");
-
- /* gpio + 7 == DVI Enable */
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
- /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
- /* GPIO + 13 == ledsync (out, heartbeat) */
- gpio_leds[3].gpio = gpio + 13;
-
- platform_device_register(&leds_gpio);
- return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
- .use_leds = true,
- .setup = omap3stalker_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
- KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_DOWN),
- KEY(0, 2, KEY_ENTER),
- KEY(0, 3, KEY_M),
-
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_I),
- KEY(1, 3, KEY_N),
-
- KEY(2, 0, KEY_A),
- KEY(2, 1, KEY_E),
- KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_O),
-
- KEY(3, 0, KEY_B),
- KEY(3, 1, KEY_F),
- KEY(3, 2, KEY_K),
- KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
- .keymap = board_keymap,
- .keymap_size = ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3stalker_kp_data = {
- .keymap_data = &board_map_data,
- .rows = 4,
- .cols = 4,
- .rep = 1,
-};
-
-static struct twl4030_platform_data omap3stalker_twldata = {
- /* platform_data for children goes here */
- .keypad = &omap3stalker_kp_data,
- .gpio = &omap3stalker_gpio_data,
- .vmmc1 = &omap3stalker_vmmc1,
- .vsim = &omap3stalker_vsim,
-};
-
-static struct at24_platform_data fram_info = {
- .byte_len = (64 * 1024) / 8,
- .page_size = 8192,
- .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
-};
-
-static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
- {
- I2C_BOARD_INFO("24c64", 0x50),
- .flags = I2C_CLIENT_WAKE,
- .platform_data = &fram_info,
- },
-};
-
-static int __init omap3_stalker_i2c_init(void)
-{
- omap3_pmic_get_config(&omap3stalker_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
- TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- omap3stalker_twldata.vdac->constraints.apply_uV = true;
- omap3stalker_twldata.vpll2->constraints.apply_uV = true;
- omap3stalker_twldata.vpll2->constraints.name = "VDVI";
-
- omap3_pmic_init("twl4030", &omap3stalker_twldata);
- omap_register_i2c_bus(2, 400, NULL, 0);
- omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
- ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
- return 0;
-}
-
-#define OMAP3_STALKER_TS_GPIO 175
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 2,
- .reset_gpio = 21,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct platform_device *omap3_stalker_devices[] __initdata = {
- &keys_gpio,
- &omap3stalker_tfp410_device,
- &omap3stalker_dvi_connector_device,
- &omap3stalker_tv_connector_device,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
- OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
- OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
- {.reg_offset = OMAP_MUX_TERMINATOR},
-};
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap3_stalker_init(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- omap_hsmmc_init(mmc);
-
- omap3_stalker_i2c_init();
-
- platform_add_devices(omap3_stalker_devices,
- ARRAY_SIZE(omap3_stalker_devices));
-
- omap_display_init(&omap3_stalker_dss_data);
-
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
- omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
-
- omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
- omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
-
- omap3stalker_init_eth();
- omap3_stalker_display_init();
-/* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(SBC3530, "OMAP3 STALKER")
- /* Maintainer: Jason Lam -lzg@ema-tech.com */
- .atag_offset = 0x100,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = omap3_stalker_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_secure_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/board-omap3touchbook.c
- *
- * Copyright (C) 2009 Always Innovating
- *
- * Modified from mach-omap2/board-omap3beagleboard.c
- *
- * Initial code: Grégoire Gentil, Tim Yamin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/spi/spi.h>
-
-#include <linux/spi/ads7846.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/system_info.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#include <asm/setup.h>
-
-#define OMAP3_AC_GPIO 136
-#define OMAP3_TS_GPIO 162
-#define TB_BL_PWM_TIMER 9
-#define TB_KILL_POWER_GPIO 168
-
-#define NAND_CS 0
-
-static unsigned long touchbook_revision;
-
-static struct mtd_partition omap3touchbook_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader",
- .offset = 0,
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot Env",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 1 * NAND_BLOCK_SIZE,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "File System",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply touchbook_vsim_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct gpio_led gpio_leds[];
-
-static int touchbook_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
- gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
- "nEN_USB_PWR");
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data touchbook_gpio_data = {
- .use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
- | BIT(15) | BIT(16) | BIT(17),
- .setup = touchbook_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply touchbook_vdac_supply[] = {
-{
- .supply = "vdac",
-},
-};
-
-static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
-{
- .supply = "vdvi",
-},
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data touchbook_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
- .consumer_supplies = touchbook_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data touchbook_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
- .consumer_supplies = touchbook_vsim_supply,
-};
-
-static struct twl4030_platform_data touchbook_twldata = {
- /* platform_data for children goes here */
- .gpio = &touchbook_gpio_data,
- .vmmc1 = &touchbook_vmmc1,
- .vsim = &touchbook_vsim,
-};
-
-static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
- {
- I2C_BOARD_INFO("bq27200", 0x55),
- },
-};
-
-static int __init omap3_touchbook_i2c_init(void)
-{
- /* Standard TouchBook bus */
- omap3_pmic_get_config(&touchbook_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- touchbook_twldata.vdac->num_consumer_supplies =
- ARRAY_SIZE(touchbook_vdac_supply);
- touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
-
- touchbook_twldata.vpll2->constraints.name = "VDVI";
- touchbook_twldata.vpll2->num_consumer_supplies =
- ARRAY_SIZE(touchbook_vdvi_supply);
- touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
-
- omap3_pmic_init("twl4030", &touchbook_twldata);
- /* Additional TouchBook bus */
- omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
- ARRAY_SIZE(touchBook_i2c_boardinfo));
-
- return 0;
-}
-
-static struct ads7846_platform_data ads7846_pdata = {
- .x_min = 100,
- .y_min = 265,
- .x_max = 3950,
- .y_max = 3750,
- .x_plate_ohms = 40,
- .pressure_max = 255,
- .debounce_max = 10,
- .debounce_tol = 5,
- .debounce_rep = 1,
- .gpio_pendown = OMAP3_TS_GPIO,
- .keep_vref_on = 1,
-};
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "touchbook::usr0",
- .default_trigger = "heartbeat",
- .gpio = 150,
- },
- {
- .name = "touchbook::usr1",
- .default_trigger = "mmc0",
- .gpio = 149,
- },
- {
- .name = "touchbook::pmu_stat",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_EXTRA,
- .gpio = 7,
- .desc = "user",
- .wakeup = 1,
- },
- {
- .code = KEY_POWER,
- .gpio = 183,
- .desc = "power",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_key_info,
- },
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 2,
- .reset_gpio = 147,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct platform_device *omap3_touchbook_devices[] __initdata = {
- &leds_gpio,
- &keys_gpio,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void omap3_touchbook_poweroff(void)
-{
- int pwr_off = TB_KILL_POWER_GPIO;
-
- if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
- printk(KERN_ERR "Unable to get kill power GPIO\n");
-}
-
-static int __init early_touchbook_revision(char *p)
-{
- if (!p)
- return 0;
-
- return kstrtoul(p, 10, &touchbook_revision);
-}
-early_param("tbr", early_touchbook_revision);
-
-static void __init omap3_touchbook_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
- pm_power_off = omap3_touchbook_poweroff;
-
- if (system_rev >= 0x20 && system_rev <= 0x34301000) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
- omap_hsmmc_init(mmc);
-
- omap3_touchbook_i2c_init();
- platform_add_devices(omap3_touchbook_devices,
- ARRAY_SIZE(omap3_touchbook_devices));
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
- /* Touchscreen and accelerometer */
- omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
- board_nand_init(omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
- NAND_BUSWIDTH_16, NULL);
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
- /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3430_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = omap3_touchbook_init,
- .init_late = omap3430_init_late,
- .init_time = omap3_secure_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o
-obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_PM_RCAR) += pm-rcar.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
+obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
+++ /dev/null
-/*
- * r8a7790 Power management support
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <asm/io.h>
-#include "common.h"
-#include "pm-rcar.h"
-#include "r8a7790.h"
-
-/* RST */
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA7BAR 0x0030
-#define CA15RESCNT 0x0040
-#define CA7RESCNT 0x0044
-
-/* On-chip RAM */
-#define MERAM 0xe8080000
-
-/* SYSC */
-#define SYSCIER 0x0c
-#define SYSCIMR 0x10
-
-#if defined(CONFIG_SMP)
-
-static void __init r8a7790_sysc_init(void)
-{
- void __iomem *base = rcar_sysc_init(0xe6180000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(0x0131000e, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
-}
-
-#else /* CONFIG_SMP */
-
-static inline void r8a7790_sysc_init(void) {}
-
-#endif /* CONFIG_SMP */
-
-void __init r8a7790_pm_init(void)
-{
- void __iomem *p;
- u32 bar;
- static int once;
-
- if (once++)
- return;
-
- /* MERAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(MERAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (MERAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar, p + CA7BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA7BAR);
-
- /* de-assert reset for all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
- p + CA7RESCNT);
- iounmap(p);
-
- r8a7790_sysc_init();
- shmobile_smp_apmu_suspend_init();
-}
+++ /dev/null
-/*
- * r8a7791 Power management support
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <asm/io.h>
-#include "common.h"
-#include "pm-rcar.h"
-#include "r8a7791.h"
-
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA15RESCNT 0x0040
-#define RAM 0xe6300000
-
-/* SYSC */
-#define SYSCIER 0x0c
-#define SYSCIMR 0x10
-
-#if defined(CONFIG_SMP)
-
-static void __init r8a7791_sysc_init(void)
-{
- void __iomem *base = rcar_sysc_init(0xe6180000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(0x0131000e, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
-}
-
-#else /* CONFIG_SMP */
-
-static inline void r8a7791_sysc_init(void) {}
-
-#endif /* CONFIG_SMP */
-
-void __init r8a7791_pm_init(void)
-{
- void __iomem *p;
- u32 bar;
- static int once;
-
- if (once++)
- return;
-
- /* RAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(RAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (RAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- iounmap(p);
-
- r8a7791_sysc_init();
- shmobile_smp_apmu_suspend_init();
-}
--- /dev/null
+/*
+ * R-Car Generation 2 Power management support
+ *
+ * Copyright (C) 2013 - 2015 Renesas Electronics Corporation
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <asm/io.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "rcar-gen2.h"
+
+/* RST */
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA7BAR 0x0030
+#define CA15RESCNT 0x0040
+#define CA7RESCNT 0x0044
+
+/* On-chip RAM */
+#define MERAM 0xe8080000
+#define RAM 0xe6300000
+
+/* SYSC */
+#define SYSCIER 0x0c
+#define SYSCIMR 0x10
+
+#if defined(CONFIG_SMP)
+
+static void __init rcar_gen2_sysc_init(u32 syscier)
+{
+ void __iomem *base = rcar_sysc_init(0xe6180000);
+
+ /* enable all interrupt sources, but do not use interrupt handler */
+ iowrite32(syscier, base + SYSCIER);
+ iowrite32(0, base + SYSCIMR);
+}
+
+#else /* CONFIG_SMP */
+
+static inline void rcar_gen2_sysc_init(u32 syscier) {}
+
+#endif /* CONFIG_SMP */
+
+void __init rcar_gen2_pm_init(void)
+{
+ void __iomem *p;
+ u32 bar;
+ static int once;
+ struct device_node *np, *cpus;
+ bool has_a7 = false;
+ bool has_a15 = false;
+ phys_addr_t boot_vector_addr = 0;
+ u32 syscier = 0;
+
+ if (once++)
+ return;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus)
+ return;
+
+ for_each_child_of_node(cpus, np) {
+ if (of_device_is_compatible(np, "arm,cortex-a15"))
+ has_a15 = true;
+ else if (of_device_is_compatible(np, "arm,cortex-a7"))
+ has_a7 = true;
+ }
+
+ if (of_machine_is_compatible("renesas,r8a7790")) {
+ boot_vector_addr = MERAM;
+ syscier = 0x013111ef;
+
+ } else if (of_machine_is_compatible("renesas,r8a7791")) {
+ boot_vector_addr = RAM;
+ syscier = 0x00111003;
+ }
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (boot_vector_addr >> 8) & 0xfffffc00;
+ if (has_a15) {
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* de-assert reset for CA15 CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) |
+ 0xa5a50000, p + CA15RESCNT);
+ }
+ if (has_a7) {
+ writel_relaxed(bar, p + CA7BAR);
+ writel_relaxed(bar | 0x10, p + CA7BAR);
+
+ /* de-assert reset for CA7 CPUs */
+ writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) |
+ 0x5a5a0000, p + CA7RESCNT);
+ }
+ iounmap(p);
+
+ rcar_gen2_sysc_init(syscier);
+ shmobile_smp_apmu_suspend_init();
+}
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
-void r8a7790_pm_init(void);
extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
#ifndef __ASM_R8A7791_H__
#define __ASM_R8A7791_H__
-void r8a7791_pm_init(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
#define MD(nr) BIT(nr)
u32 rcar_gen2_read_mode_pins(void);
void rcar_gen2_reserve(void);
+void rcar_gen2_pm_init(void);
#endif /* __ASM_RCAR_GEN2_H__ */
#include "common.h"
#include "platsmp-apmu.h"
#include "pm-rcar.h"
+#include "rcar-gen2.h"
#include "r8a7790.h"
static struct rcar_sysc_ch r8a7790_ca15_scu = {
ARRAY_SIZE(r8a7790_apmu_config));
/* turn on power to SCU */
- r8a7790_pm_init();
+ rcar_gen2_pm_init();
rcar_sysc_power_up(&r8a7790_ca15_scu);
rcar_sysc_power_up(&r8a7790_ca7_scu);
}
r8a7791_apmu_config,
ARRAY_SIZE(r8a7791_apmu_config));
- r8a7791_pm_init();
+ rcar_gen2_pm_init();
}
static int r8a7791_smp_boot_secondary(unsigned int cpu,
projects / karo-tx-linux.git / commitdiff