+----------+-----------+------------------------------------------------+
*/
-#include "hwdrv_apci3120.h"
+/* used for test on mixture of BIP/UNI ranges */
+#define APCI3120_BIPOLAR_RANGES 4
+
+#define APCI3120_ADDRESS_RANGE 16
+
+#define APCI3120_DISABLE 0
+#define APCI3120_ENABLE 1
+
+#define APCI3120_START 1
+#define APCI3120_STOP 0
+
+#define APCI3120_EOC_MODE 1
+#define APCI3120_EOS_MODE 2
+#define APCI3120_DMA_MODE 3
+
+/* DIGITAL INPUT-OUTPUT DEFINE */
+
+#define APCI3120_DIGITAL_OUTPUT 0x0d
+#define APCI3120_RD_STATUS 0x02
+#define APCI3120_RD_FIFO 0x00
+
+/* digital output insn_write ON /OFF selection */
+#define APCI3120_SET4DIGITALOUTPUTON 1
+#define APCI3120_SET4DIGITALOUTPUTOFF 0
+
+/* analog output SELECT BIT */
+#define APCI3120_ANALOG_OP_CHANNEL_1 0x0000
+#define APCI3120_ANALOG_OP_CHANNEL_2 0x4000
+#define APCI3120_ANALOG_OP_CHANNEL_3 0x8000
+#define APCI3120_ANALOG_OP_CHANNEL_4 0xc000
+#define APCI3120_ANALOG_OP_CHANNEL_5 0x0000
+#define APCI3120_ANALOG_OP_CHANNEL_6 0x4000
+#define APCI3120_ANALOG_OP_CHANNEL_7 0x8000
+#define APCI3120_ANALOG_OP_CHANNEL_8 0xc000
+
+/* Enable external trigger bit in nWrAddress */
+#define APCI3120_ENABLE_EXT_TRIGGER 0x8000
+
+/* ANALOG OUTPUT AND INPUT DEFINE */
+#define APCI3120_UNIPOLAR 0x80
+#define APCI3120_BIPOLAR 0x00
+#define APCI3120_ANALOG_OUTPUT_1 0x08
+#define APCI3120_ANALOG_OUTPUT_2 0x0a
+#define APCI3120_1_GAIN 0x00
+#define APCI3120_2_GAIN 0x10
+#define APCI3120_5_GAIN 0x20
+#define APCI3120_10_GAIN 0x30
+#define APCI3120_SEQ_RAM_ADDRESS 0x06
+#define APCI3120_RESET_FIFO 0x0c
+#define APCI3120_TIMER_0_MODE_2 0x01
+#define APCI3120_TIMER_0_MODE_4 0x2
+#define APCI3120_SELECT_TIMER_0_WORD 0x00
+#define APCI3120_ENABLE_TIMER0 0x1000
+#define APCI3120_CLEAR_PR 0xf0ff
+#define APCI3120_CLEAR_PA 0xfff0
+#define APCI3120_CLEAR_PA_PR (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA)
+
+/* nWrMode_Select */
+#define APCI3120_ENABLE_SCAN 0x8
+#define APCI3120_DISABLE_SCAN (~APCI3120_ENABLE_SCAN)
+#define APCI3120_ENABLE_EOS_INT 0x2
+
+#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT)
+#define APCI3120_ENABLE_EOC_INT 0x1
+#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT)
+#define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER \
+ (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
+#define APCI3120_DISABLE_ALL_INTERRUPT \
+ (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
+
+/* status register bits */
+#define APCI3120_EOC 0x8000
+#define APCI3120_EOS 0x2000
+
+/* software trigger dummy register */
+#define APCI3120_START_CONVERSION 0x02
+
+/* TIMER DEFINE */
+#define APCI3120_QUARTZ_A 70
+#define APCI3120_QUARTZ_B 50
+#define APCI3120_TIMER 1
+#define APCI3120_WATCHDOG 2
+#define APCI3120_TIMER_DISABLE 0
+#define APCI3120_TIMER_ENABLE 1
+#define APCI3120_ENABLE_TIMER2 0x4000
+#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
+#define APCI3120_ENABLE_TIMER_INT 0x04
+#define APCI3120_DISABLE_TIMER_INT (~APCI3120_ENABLE_TIMER_INT)
+#define APCI3120_WRITE_MODE_SELECT 0x0e
+#define APCI3120_SELECT_TIMER_0_WORD 0x00
+#define APCI3120_SELECT_TIMER_1_WORD 0x01
+#define APCI3120_TIMER_1_MODE_2 0x4
+
+/* $$ BIT FOR MODE IN nCsTimerCtr1 */
+#define APCI3120_TIMER_2_MODE_0 0x0
+#define APCI3120_TIMER_2_MODE_2 0x10
+#define APCI3120_TIMER_2_MODE_5 0x30
+
+/* $$ BIT FOR MODE IN nCsTimerCtr0 */
+#define APCI3120_SELECT_TIMER_2_LOW_WORD 0x02
+#define APCI3120_SELECT_TIMER_2_HIGH_WORD 0x03
+
+#define APCI3120_TIMER_CRT0 0x0d
+#define APCI3120_TIMER_CRT1 0x0c
+
+#define APCI3120_TIMER_VALUE 0x04
+#define APCI3120_TIMER_STATUS_REGISTER 0x0d
+#define APCI3120_RD_STATUS 0x02
+#define APCI3120_WR_ADDRESS 0x00
+#define APCI3120_ENABLE_WATCHDOG 0x20
+#define APCI3120_DISABLE_WATCHDOG (~APCI3120_ENABLE_WATCHDOG)
+#define APCI3120_ENABLE_TIMER_COUNTER 0x10
+#define APCI3120_DISABLE_TIMER_COUNTER (~APCI3120_ENABLE_TIMER_COUNTER)
+#define APCI3120_FC_TIMER 0x1000
+#define APCI3120_ENABLE_TIMER0 0x1000
+#define APCI3120_ENABLE_TIMER1 0x2000
+#define APCI3120_ENABLE_TIMER2 0x4000
+#define APCI3120_DISABLE_TIMER0 (~APCI3120_ENABLE_TIMER0)
+#define APCI3120_DISABLE_TIMER1 (~APCI3120_ENABLE_TIMER1)
+#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
+
+#define APCI3120_TIMER2_SELECT_EOS 0xc0
+#define APCI3120_COUNTER 3
+#define APCI3120_DISABLE_ALL_TIMER (APCI3120_DISABLE_TIMER0 & \
+ APCI3120_DISABLE_TIMER1 & \
+ APCI3120_DISABLE_TIMER2)
+
+#define MAX_ANALOGINPUT_CHANNELS 32
+
+struct str_AnalogReadInformation {
+ /* EOC or EOS */
+ unsigned char b_Type;
+ /* Interrupt use or not */
+ unsigned char b_InterruptFlag;
+ /* Selection of the conversion time */
+ unsigned int ui_ConvertTiming;
+ /* Number of channel to read */
+ unsigned char b_NbrOfChannel;
+ /* Number of the channel to be read */
+ unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];
+ /* Gain of each channel */
+ unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS];
+};
+
+/* ANALOG INPUT RANGE */
+static const struct comedi_lrange range_apci3120_ai = {
+ 8, {
+ BIP_RANGE(10),
+ BIP_RANGE(5),
+ BIP_RANGE(2),
+ BIP_RANGE(1),
+ UNI_RANGE(10),
+ UNI_RANGE(5),
+ UNI_RANGE(2),
+ UNI_RANGE(1)
+ }
+};
+
+/* ANALOG OUTPUT RANGE */
+static const struct comedi_lrange range_apci3120_ao = {
+ 2, {
+ BIP_RANGE(10),
+ UNI_RANGE(10)
+ }
+};
+
+
static unsigned int ui_Temp;
/* FUNCTION DEFINITIONS */
+++ /dev/null
-
-/* hwdrv_apci3120.h */
-
-/*
- * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
- *
- * ADDI-DATA GmbH
- * Dieselstrasse 3
- * D-77833 Ottersweier
- * Tel: +19(0)7223/9493-0
- * Fax: +49(0)7223/9493-92
- * http://www.addi-data.com
- * info@addi-data.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* comedi related defines */
-
-/* ANALOG INPUT RANGE */
-static const struct comedi_lrange range_apci3120_ai = { 8, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2),
- BIP_RANGE(1),
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2),
- UNI_RANGE(1)
- }
-};
-
-/* ANALOG OUTPUT RANGE */
-static const struct comedi_lrange range_apci3120_ao = { 2, {
- BIP_RANGE(10),
- UNI_RANGE(10)
- }
-};
-
-#define APCI3120_BIPOLAR_RANGES 4 /* used for test on mixture of BIP/UNI ranges */
-
-#define APCI3120_ADDRESS_RANGE 16
-
-#define APCI3120_DISABLE 0
-#define APCI3120_ENABLE 1
-
-#define APCI3120_START 1
-#define APCI3120_STOP 0
-
-#define APCI3120_EOC_MODE 1
-#define APCI3120_EOS_MODE 2
-#define APCI3120_DMA_MODE 3
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI3120_DIGITAL_OUTPUT 0x0D
-#define APCI3120_RD_STATUS 0x02
-#define APCI3120_RD_FIFO 0x00
-
-/* digital output insn_write ON /OFF selection */
-#define APCI3120_SET4DIGITALOUTPUTON 1
-#define APCI3120_SET4DIGITALOUTPUTOFF 0
-
-/* analog output SELECT BIT */
-#define APCI3120_ANALOG_OP_CHANNEL_1 0x0000
-#define APCI3120_ANALOG_OP_CHANNEL_2 0x4000
-#define APCI3120_ANALOG_OP_CHANNEL_3 0x8000
-#define APCI3120_ANALOG_OP_CHANNEL_4 0xC000
-#define APCI3120_ANALOG_OP_CHANNEL_5 0x0000
-#define APCI3120_ANALOG_OP_CHANNEL_6 0x4000
-#define APCI3120_ANALOG_OP_CHANNEL_7 0x8000
-#define APCI3120_ANALOG_OP_CHANNEL_8 0xC000
-
-/* Enable external trigger bit in nWrAddress */
-#define APCI3120_ENABLE_EXT_TRIGGER 0x8000
-
-/* ANALOG OUTPUT AND INPUT DEFINE */
-#define APCI3120_UNIPOLAR 0x80 /* $$ RAM sequence polarity BIT */
-#define APCI3120_BIPOLAR 0x00 /* $$ RAM sequence polarity BIT */
-#define APCI3120_ANALOG_OUTPUT_1 0x08 /* (ADDRESS ) */
-#define APCI3120_ANALOG_OUTPUT_2 0x0A /* (ADDRESS ) */
-#define APCI3120_1_GAIN 0x00 /* $$ RAM sequence Gain Bits for gain 1 */
-#define APCI3120_2_GAIN 0x10 /* $$ RAM sequence Gain Bits for gain 2 */
-#define APCI3120_5_GAIN 0x20 /* $$ RAM sequence Gain Bits for gain 5 */
-#define APCI3120_10_GAIN 0x30 /* $$ RAM sequence Gain Bits for gain 10 */
-#define APCI3120_SEQ_RAM_ADDRESS 0x06 /* $$ EARLIER NAMED APCI3120_FIFO_ADDRESS */
-#define APCI3120_RESET_FIFO 0x0C /* (ADDRESS) */
-#define APCI3120_TIMER_0_MODE_2 0x01 /* $$ Bits for timer mode */
-#define APCI3120_TIMER_0_MODE_4 0x2
-#define APCI3120_SELECT_TIMER_0_WORD 0x00
-#define APCI3120_ENABLE_TIMER0 0x1000 /* $$Gatebit 0 in nWrAddress */
-#define APCI3120_CLEAR_PR 0xF0FF
-#define APCI3120_CLEAR_PA 0xFFF0
-#define APCI3120_CLEAR_PA_PR (APCI3120_CLEAR_PR & APCI3120_CLEAR_PA)
-
-/* nWrMode_Select */
-#define APCI3120_ENABLE_SCAN 0x8 /* $$ bit in nWrMode_Select */
-#define APCI3120_DISABLE_SCAN (~APCI3120_ENABLE_SCAN)
-#define APCI3120_ENABLE_EOS_INT 0x2 /* $$ bit in nWrMode_Select */
-
-#define APCI3120_DISABLE_EOS_INT (~APCI3120_ENABLE_EOS_INT)
-#define APCI3120_ENABLE_EOC_INT 0x1
-#define APCI3120_DISABLE_EOC_INT (~APCI3120_ENABLE_EOC_INT)
-#define APCI3120_DISABLE_ALL_INTERRUPT_WITHOUT_TIMER (APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
-#define APCI3120_DISABLE_ALL_INTERRUPT (APCI3120_DISABLE_TIMER_INT & APCI3120_DISABLE_EOS_INT & APCI3120_DISABLE_EOC_INT)
-
-/* status register bits */
-#define APCI3120_EOC 0x8000
-#define APCI3120_EOS 0x2000
-
-/* software trigger dummy register */
-#define APCI3120_START_CONVERSION 0x02 /* (ADDRESS) */
-
-/* TIMER DEFINE */
-#define APCI3120_QUARTZ_A 70
-#define APCI3120_QUARTZ_B 50
-#define APCI3120_TIMER 1
-#define APCI3120_WATCHDOG 2
-#define APCI3120_TIMER_DISABLE 0
-#define APCI3120_TIMER_ENABLE 1
-#define APCI3120_ENABLE_TIMER2 0x4000 /* $$ gatebit 2 in nWrAddress */
-#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
-#define APCI3120_ENABLE_TIMER_INT 0x04 /* $$ ENAIRQ_FC_Bit in nWrModeSelect */
-#define APCI3120_DISABLE_TIMER_INT (~APCI3120_ENABLE_TIMER_INT)
-#define APCI3120_WRITE_MODE_SELECT 0x0E /* (ADDRESS) */
-#define APCI3120_SELECT_TIMER_0_WORD 0x00
-#define APCI3120_SELECT_TIMER_1_WORD 0x01
-#define APCI3120_TIMER_1_MODE_2 0x4
-
-/* $$ BIT FOR MODE IN nCsTimerCtr1 */
-#define APCI3120_TIMER_2_MODE_0 0x0
-#define APCI3120_TIMER_2_MODE_2 0x10
-#define APCI3120_TIMER_2_MODE_5 0x30
-
-/* $$ BIT FOR MODE IN nCsTimerCtr0 */
-#define APCI3120_SELECT_TIMER_2_LOW_WORD 0x02
-#define APCI3120_SELECT_TIMER_2_HIGH_WORD 0x03
-
-#define APCI3120_TIMER_CRT0 0x0D /* (ADDRESS for cCsTimerCtr0) */
-#define APCI3120_TIMER_CRT1 0x0C /* (ADDRESS for cCsTimerCtr1) */
-
-#define APCI3120_TIMER_VALUE 0x04 /* ADDRESS for nCsTimerWert */
-#define APCI3120_TIMER_STATUS_REGISTER 0x0D /* ADDRESS for delete timer 2 interrupt */
-#define APCI3120_RD_STATUS 0x02 /* ADDRESS */
-#define APCI3120_WR_ADDRESS 0x00 /* ADDRESS */
-#define APCI3120_ENABLE_WATCHDOG 0x20 /* $$BIT in nWrMode_Select */
-#define APCI3120_DISABLE_WATCHDOG (~APCI3120_ENABLE_WATCHDOG)
-#define APCI3120_ENABLE_TIMER_COUNTER 0x10 /* $$BIT in nWrMode_Select */
-#define APCI3120_DISABLE_TIMER_COUNTER (~APCI3120_ENABLE_TIMER_COUNTER)
-#define APCI3120_FC_TIMER 0x1000 /* bit in status register */
-#define APCI3120_ENABLE_TIMER0 0x1000
-#define APCI3120_ENABLE_TIMER1 0x2000
-#define APCI3120_ENABLE_TIMER2 0x4000
-#define APCI3120_DISABLE_TIMER0 (~APCI3120_ENABLE_TIMER0)
-#define APCI3120_DISABLE_TIMER1 (~APCI3120_ENABLE_TIMER1)
-#define APCI3120_DISABLE_TIMER2 (~APCI3120_ENABLE_TIMER2)
-
-#define APCI3120_TIMER2_SELECT_EOS 0xC0 /* ADDED on 20-6 */
-#define APCI3120_COUNTER 3 /* on 20-6 */
-#define APCI3120_DISABLE_ALL_TIMER (APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2) /* on 20-6 */
-
-#define MAX_ANALOGINPUT_CHANNELS 32
-
-struct str_AnalogReadInformation {
-
- unsigned char b_Type; /* EOC or EOS */
- unsigned char b_InterruptFlag; /* Interrupt use or not */
- unsigned int ui_ConvertTiming; /* Selection of the conversion time */
- unsigned char b_NbrOfChannel; /* Number of channel to read */
- unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS]; /* Number of the channel to be read */
- unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS]; /* Gain of each channel */
-
-};
projects / linux-beck.git / commitdiff