image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
- cuImage.mpc8548cds \
+ cuImage.mpc8548cds_32b \
cuImage.mpc8555cds
image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
+++ /dev/null
-/*
- * MPC8548 CDS Device Tree Source
- *
- * Copyright 2006, 2008, 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
- model = "MPC8548CDS";
- compatible = "MPC8548CDS", "MPC85xxCDS";
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- memory {
- device_type = "memory";
- reg = <0 0 0x0 0x8000000>; // 128M at 0x0
- };
-
- lbc: localbus@e0005000 {
- reg = <0 0xe0005000 0 0x1000>;
-
- ranges = <0x0 0x0 0x0 0xff000000 0x01000000
- 0x1 0x0 0x0 0xf8004000 0x00001000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x01000000>;
- bank-width = <2>;
- device-width = <2>;
-
- partition@0 {
- reg = <0x0 0x0b00000>;
- label = "ramdisk-nor";
- };
-
- partition@300000 {
- reg = <0x0b00000 0x0400000>;
- label = "kernel-nor";
- };
-
- partition@700000 {
- reg = <0x0f00000 0x060000>;
- label = "dtb-nor";
- };
-
- partition@760000 {
- reg = <0x0f60000 0x020000>;
- label = "env-nor";
- read-only;
- };
-
- partition@780000 {
- reg = <0x0f80000 0x080000>;
- label = "u-boot-nor";
- read-only;
- };
- };
-
- board-control@1,0 {
- compatible = "fsl,mpc8548cds-fpga";
- reg = <0x1 0x0 0x1000>;
- };
- };
-
- soc: soc8548@e0000000 {
- ranges = <0 0x0 0xe0000000 0x100000>;
-
- i2c@3000 {
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
-
- eeprom@56 {
- compatible = "atmel,24c64";
- reg = <0x56>;
- };
-
- eeprom@57 {
- compatible = "atmel,24c64";
- reg = <0x57>;
- };
- };
-
- i2c@3100 {
- eeprom@50 {
- compatible = "atmel,24c64";
- reg = <0x50>;
- };
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupts = <5 1 0 0>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupts = <5 1 0 0>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupts = <5 1 0 0>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupts = <5 1 0 0>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet3: ethernet@27000 {
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- };
-
- mdio@27520 {
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- pci0: pci@e0008000 {
- reg = <0 0xe0008000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
- /* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
- /* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
- pci_bridge@1c {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
- /* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
- /* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
- /* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
- reg = <0xe000 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x80000>;
- clock-frequency = <33333333>;
-
- isa@4 {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0x2000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- interrupt-controller;
- device_type = "interrupt-controller";
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <0 1 0 0>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
- };
- };
- };
-
- pci1: pci@e0009000 {
- reg = <0 0xe0009000 0 0x1000>;
- ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
- };
-
- pci2: pcie@e000a000 {
- reg = <0 0xe000a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- rio: rapidio@e00c0000 {
- reg = <0x0 0xe00c0000 0x0 0x20000>;
- port1 {
- ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
- };
- };
-};
-
-/include/ "fsl/mpc8548si-post.dtsi"
--- /dev/null
+/*
+ * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+
+ partition@0 {
+ reg = <0x0 0x0b00000>;
+ label = "ramdisk-nor";
+ };
+
+ partition@300000 {
+ reg = <0x0b00000 0x0400000>;
+ label = "kernel-nor";
+ };
+
+ partition@700000 {
+ reg = <0x0f00000 0x060000>;
+ label = "dtb-nor";
+ };
+
+ partition@760000 {
+ reg = <0x0f60000 0x020000>;
+ label = "env-nor";
+ read-only;
+ };
+
+ partition@780000 {
+ reg = <0x0f80000 0x080000>;
+ label = "u-boot-nor";
+ read-only;
+ };
+ };
+
+ board-control@1,0 {
+ compatible = "fsl,mpc8548cds-fpga";
+ reg = <0x1 0x0 0x1000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+ };
+
+ i2c@3100 {
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x4 (PCIX Slot 2) */
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x5 (PCIX Slot 3) */
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+ /* IDSEL 0x6 (PCIX Slot 4) */
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x8 (PCIX Slot 5) */
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0xC (Tsi310 bridge) */
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x14 (Slot 2) */
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x15 (Slot 3) */
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+ /* IDSEL 0x16 (Slot 4) */
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x18 (Slot 5) */
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+
+ pci_bridge@1c {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x00 (PrPMC Site) */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x04 (VIA chip) */
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+ /* IDSEL 0x05 (8139) */
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x06 (Slot 6) */
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDESL 0x07 (Slot 7) */
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
+
+ reg = <0xe000 0x0 0x0 0x0 0x0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x80000>;
+ clock-frequency = <33333333>;
+
+ isa@4 {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <0 1 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * MPC8548 CDS Device Tree Source (32-bit address map)
+ *
+ * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+ model = "MPC8548CDS";
+ compatible = "MPC8548CDS", "MPC85xxCDS";
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
+ };
+
+ board_lbc: lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+
+ ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+ 0x1 0x0 0x0 0xf8004000 0x00001000>;
+
+ };
+
+ board_soc: soc: soc8548@e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
+ };
+
+ board_pci0: pci0: pci@e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
+ };
+
+ pci1: pci@e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+ };
+
+ pci2: pcie@e000a000 {
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ rio: rapidio@e00c0000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
+ };
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"
projects / mv-sheeva.git / commitdiff