]> git.karo-electronics.de Git - linux-beck.git/commitdiff
fm10k: Add netdev
authorAlexander Duyck <alexander.h.duyck@intel.com>
Sat, 20 Sep 2014 23:48:10 +0000 (19:48 -0400)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tue, 23 Sep 2014 10:59:15 +0000 (03:59 -0700)
Now that we have the ability to configure the basic settings on the device
we can start allocating and configuring a netdev for the interface.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/fm10k/Makefile
drivers/net/ethernet/intel/fm10k/fm10k.h
drivers/net/ethernet/intel/fm10k/fm10k_netdev.c [new file with mode: 0644]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c

index 0904bcba963a5071c73fa984dcca610f28520eb8..ee4e41576fe132b148632313d067049bbf30ac7e 100644 (file)
@@ -28,5 +28,5 @@
 obj-$(CONFIG_FM10K) += fm10k.o
 
 fm10k-objs := fm10k_main.o fm10k_common.o fm10k_pci.o \
-             fm10k_pf.o \
+             fm10k_netdev.o fm10k_pf.o \
              fm10k_mbx.o fm10k_tlv.o
index 3da3a9904d5627dff8f3ff1f37141ee04de9e789..b2ee4fce7635336a0290590baeac56a6907d784e 100644 (file)
 #include <linux/if_vlan.h>
 #include <linux/pci.h>
 
-#include "fm10k_common.h"
+#include "fm10k_pf.h"
+
+#define FM10K_MAX_JUMBO_FRAME_SIZE     15358   /* Maximum supported size 15K */
+
+enum fm10k_ring_f_enum {
+       RING_F_RSS,
+       RING_F_QOS,
+       RING_F_ARRAY_SIZE  /* must be last in enum set */
+};
+
+struct fm10k_ring_feature {
+       u16 limit;      /* upper limit on feature indices */
+       u16 indices;    /* current value of indices */
+       u16 mask;       /* Mask used for feature to ring mapping */
+       u16 offset;     /* offset to start of feature */
+};
+
+#define fm10k_vxlan_port_for_each(vp, intfc) \
+       list_for_each_entry(vp, &(intfc)->vxlan_port, list)
+struct fm10k_vxlan_port {
+       struct list_head        list;
+       sa_family_t             sa_family;
+       __be16                  port;
+};
 
 struct fm10k_intfc {
+       unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+       struct net_device *netdev;
        struct pci_dev *pdev;
+       unsigned long state;
+
+       u32 flags;
+#define FM10K_FLAG_RESET_REQUESTED             (u32)(1 << 0)
+#define FM10K_FLAG_RSS_FIELD_IPV4_UDP          (u32)(1 << 1)
+#define FM10K_FLAG_RSS_FIELD_IPV6_UDP          (u32)(1 << 2)
+#define FM10K_FLAG_RX_TS_ENABLED               (u32)(1 << 3)
+#define FM10K_FLAG_SWPRI_CONFIG                        (u32)(1 << 4)
+       int xcast_mode;
+
+       u64 rx_overrun_pf;
+       u64 rx_overrun_vf;
 
+       struct fm10k_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+
+       struct fm10k_hw_stats stats;
        struct fm10k_hw hw;
        u32 __iomem *uc_addr;
+       u16 msg_enable;
+
+       u32 reta[FM10K_RETA_SIZE];
+       u32 rssrk[FM10K_RSSRK_SIZE];
+
+       /* VXLAN port tracking information */
+       struct list_head vxlan_port;
+
+#if defined(HAVE_DCBNL_IEEE) && defined(CONFIG_DCB)
+       u8 pfc_en;
+#endif
+       u8 rx_pause;
+
+       /* GLORT resources in use by PF */
+       u16 glort;
+       u16 glort_count;
+
+       /* VLAN ID for updating multicast/unicast lists */
+       u16 vid;
+};
+
+enum fm10k_state_t {
+       __FM10K_RESETTING,
+       __FM10K_DOWN,
+       __FM10K_MBX_LOCK,
+       __FM10K_LINK_DOWN,
 };
 
+static inline void fm10k_mbx_lock(struct fm10k_intfc *interface)
+{
+       /* busy loop if we cannot obtain the lock as some calls
+        * such as ndo_set_rx_mode may be made in atomic context
+        */
+       while (test_and_set_bit(__FM10K_MBX_LOCK, &interface->state))
+               udelay(20);
+}
+
+static inline void fm10k_mbx_unlock(struct fm10k_intfc *interface)
+{
+       /* flush memory to make sure state is correct */
+       smp_mb__before_atomic();
+       clear_bit(__FM10K_MBX_LOCK, &interface->state);
+}
+
+static inline int fm10k_mbx_trylock(struct fm10k_intfc *interface)
+{
+       return !test_and_set_bit(__FM10K_MBX_LOCK, &interface->state);
+}
+
 /* main */
 extern char fm10k_driver_name[];
 extern const char fm10k_driver_version[];
@@ -43,4 +130,7 @@ extern const char fm10k_driver_version[];
 /* PCI */
 int fm10k_register_pci_driver(void);
 void fm10k_unregister_pci_driver(void);
+
+/* Netdev */
+struct net_device *fm10k_alloc_netdev(void);
 #endif /* _FM10K_H_ */
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
new file mode 100644 (file)
index 0000000..9a4f3a6
--- /dev/null
@@ -0,0 +1,98 @@
+/* Intel Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ */
+
+#include "fm10k.h"
+
+static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev)
+{
+       dev_kfree_skb_any(skb);
+       return NETDEV_TX_OK;
+}
+
+static int fm10k_change_mtu(struct net_device *dev, int new_mtu)
+{
+       if (new_mtu < 68 || new_mtu > FM10K_MAX_JUMBO_FRAME_SIZE)
+               return -EINVAL;
+
+       dev->mtu = new_mtu;
+
+       return 0;
+}
+
+static int fm10k_set_mac(struct net_device *dev, void *p)
+{
+       struct sockaddr *addr = p;
+       s32 err = 0;
+
+       if (!is_valid_ether_addr(addr->sa_data))
+               return -EADDRNOTAVAIL;
+
+       if (!err) {
+               ether_addr_copy(dev->dev_addr, addr->sa_data);
+               dev->addr_assign_type &= ~NET_ADDR_RANDOM;
+       }
+
+       return err;
+}
+
+static void fm10k_set_rx_mode(struct net_device *dev)
+{
+}
+
+static const struct net_device_ops fm10k_netdev_ops = {
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_start_xmit         = fm10k_xmit_frame,
+       .ndo_set_mac_address    = fm10k_set_mac,
+       .ndo_change_mtu         = fm10k_change_mtu,
+       .ndo_set_rx_mode        = fm10k_set_rx_mode,
+};
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+
+struct net_device *fm10k_alloc_netdev(void)
+{
+       struct fm10k_intfc *interface;
+       struct net_device *dev;
+
+       dev = alloc_etherdev(sizeof(struct fm10k_intfc));
+       if (!dev)
+               return NULL;
+
+       /* set net device and ethtool ops */
+       dev->netdev_ops = &fm10k_netdev_ops;
+
+       /* configure default debug level */
+       interface = netdev_priv(dev);
+       interface->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+       /* configure default features */
+       dev->features |= NETIF_F_SG;
+
+       /* all features defined to this point should be changeable */
+       dev->hw_features |= dev->features;
+
+       /* configure VLAN features */
+       dev->vlan_features |= dev->features;
+
+       /* configure tunnel offloads */
+       dev->hw_enc_features = NETIF_F_SG;
+
+       return dev;
+}
index 6d5e33cde6a7d9ac25464940d9ae01a2fde9f4ef..5fcbd1d621b7e9e28974a7b251df83e43cb0c936 100644 (file)
 
 #include "fm10k.h"
 
+static const struct fm10k_info *fm10k_info_tbl[] = {
+       [fm10k_device_pf] = &fm10k_pf_info,
+};
+
 /**
  * fm10k_pci_tbl - PCI Device ID Table
  *
@@ -32,7 +36,7 @@
  *   Class, Class Mask, private data (not used) }
  */
 static const struct pci_device_id fm10k_pci_tbl[] = {
-       { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF) },
+       { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf },
        /* required last entry */
        { 0, }
 };
@@ -62,12 +66,153 @@ u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
                return ~value;
 
        value = readl(&hw_addr[reg]);
-       if (!(~value) && (!reg || !(~readl(hw_addr))))
+       if (!(~value) && (!reg || !(~readl(hw_addr)))) {
+               struct fm10k_intfc *interface = hw->back;
+               struct net_device *netdev = interface->netdev;
+
                hw->hw_addr = NULL;
+               netif_device_detach(netdev);
+               netdev_err(netdev, "PCIe link lost, device now detached\n");
+       }
 
        return value;
 }
 
+static int fm10k_hw_ready(struct fm10k_intfc *interface)
+{
+       struct fm10k_hw *hw = &interface->hw;
+
+       fm10k_write_flush(hw);
+
+       return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0;
+}
+
+/**
+ * fm10k_sw_init - Initialize general software structures
+ * @interface: host interface private structure to initialize
+ *
+ * fm10k_sw_init initializes the interface private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int fm10k_sw_init(struct fm10k_intfc *interface,
+                        const struct pci_device_id *ent)
+{
+       static const u32 seed[FM10K_RSSRK_SIZE] = { 0xda565a6d, 0xc20e5b25,
+                                                   0x3d256741, 0xb08fa343,
+                                                   0xcb2bcad0, 0xb4307bae,
+                                                   0xa32dcb77, 0x0cf23080,
+                                                   0x3bb7426a, 0xfa01acbe };
+       const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data];
+       struct fm10k_hw *hw = &interface->hw;
+       struct pci_dev *pdev = interface->pdev;
+       struct net_device *netdev = interface->netdev;
+       unsigned int rss;
+       int err;
+
+       /* initialize back pointer */
+       hw->back = interface;
+       hw->hw_addr = interface->uc_addr;
+
+       /* PCI config space info */
+       hw->vendor_id = pdev->vendor;
+       hw->device_id = pdev->device;
+       hw->revision_id = pdev->revision;
+       hw->subsystem_vendor_id = pdev->subsystem_vendor;
+       hw->subsystem_device_id = pdev->subsystem_device;
+
+       /* Setup hw api */
+       memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops));
+       hw->mac.type = fi->mac;
+
+       /* Set common capability flags and settings */
+       rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus());
+       interface->ring_feature[RING_F_RSS].limit = rss;
+       fi->get_invariants(hw);
+
+       /* pick up the PCIe bus settings for reporting later */
+       if (hw->mac.ops.get_bus_info)
+               hw->mac.ops.get_bus_info(hw);
+
+       /* limit the usable DMA range */
+       if (hw->mac.ops.set_dma_mask)
+               hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev));
+
+       /* update netdev with DMA restrictions */
+       if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) {
+               netdev->features |= NETIF_F_HIGHDMA;
+               netdev->vlan_features |= NETIF_F_HIGHDMA;
+       }
+
+       /* reset and initialize the hardware so it is in a known state */
+       err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw);
+       if (err) {
+               dev_err(&pdev->dev, "init_hw failed: %d\n", err);
+               return err;
+       }
+
+       /* initialize hardware statistics */
+       hw->mac.ops.update_hw_stats(hw, &interface->stats);
+
+       /* Start with random Ethernet address */
+       eth_random_addr(hw->mac.addr);
+
+       /* Initialize MAC address from hardware */
+       err = hw->mac.ops.read_mac_addr(hw);
+       if (err) {
+               dev_warn(&pdev->dev,
+                        "Failed to obtain MAC address defaulting to random\n");
+               /* tag address assignment as random */
+               netdev->addr_assign_type |= NET_ADDR_RANDOM;
+       }
+
+       memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+       memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
+
+       if (!is_valid_ether_addr(netdev->perm_addr)) {
+               dev_err(&pdev->dev, "Invalid MAC Address\n");
+               return -EIO;
+       }
+
+       /* Only the PF can support VXLAN and NVGRE offloads */
+       if (hw->mac.type != fm10k_mac_pf) {
+               netdev->hw_enc_features = 0;
+               netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL;
+               netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL;
+       }
+
+       /* initialize vxlan_port list */
+       INIT_LIST_HEAD(&interface->vxlan_port);
+
+       /* initialize RSS key */
+       memcpy(interface->rssrk, seed, sizeof(seed));
+
+       /* Start off interface as being down */
+       set_bit(__FM10K_DOWN, &interface->state);
+
+       return 0;
+}
+
+static void fm10k_slot_warn(struct fm10k_intfc *interface)
+{
+       struct device *dev = &interface->pdev->dev;
+       struct fm10k_hw *hw = &interface->hw;
+
+       if (hw->mac.ops.is_slot_appropriate(hw))
+               return;
+
+       dev_warn(dev,
+                "For optimal performance, a %s %s slot is recommended.\n",
+                (hw->bus_caps.width == fm10k_bus_width_pcie_x1 ? "x1" :
+                 hw->bus_caps.width == fm10k_bus_width_pcie_x4 ? "x4" :
+                 "x8"),
+                (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s" :
+                 hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s" :
+                 "8.0GT/s"));
+       dev_warn(dev,
+                "A slot with more lanes and/or higher speed is suggested.\n");
+}
+
 /**
  * fm10k_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -82,6 +227,9 @@ u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
 static int fm10k_probe(struct pci_dev *pdev,
                       const struct pci_device_id *ent)
 {
+       struct net_device *netdev;
+       struct fm10k_intfc *interface;
+       struct fm10k_hw *hw;
        int err;
        u64 dma_mask;
 
@@ -122,8 +270,75 @@ static int fm10k_probe(struct pci_dev *pdev,
        pci_set_master(pdev);
        pci_save_state(pdev);
 
+       netdev = fm10k_alloc_netdev();
+       if (!netdev) {
+               err = -ENOMEM;
+               goto err_alloc_netdev;
+       }
+
+       SET_NETDEV_DEV(netdev, &pdev->dev);
+
+       interface = netdev_priv(netdev);
+       pci_set_drvdata(pdev, interface);
+
+       interface->netdev = netdev;
+       interface->pdev = pdev;
+       hw = &interface->hw;
+
+       interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
+                                    FM10K_UC_ADDR_SIZE);
+       if (!interface->uc_addr) {
+               err = -EIO;
+               goto err_ioremap;
+       }
+
+       err = fm10k_sw_init(interface, ent);
+       if (err)
+               goto err_sw_init;
+
+       /* final check of hardware state before registering the interface */
+       err = fm10k_hw_ready(interface);
+       if (err)
+               goto err_register;
+
+       err = register_netdev(netdev);
+       if (err)
+               goto err_register;
+
+       /* carrier off reporting is important to ethtool even BEFORE open */
+       netif_carrier_off(netdev);
+
+       /* stop all the transmit queues from transmitting until link is up */
+       netif_tx_stop_all_queues(netdev);
+
+       /* print bus type/speed/width info */
+       dev_info(&pdev->dev, "(PCI Express:%s Width: %s Payload: %s)\n",
+                (hw->bus.speed == fm10k_bus_speed_8000 ? "8.0GT/s" :
+                 hw->bus.speed == fm10k_bus_speed_5000 ? "5.0GT/s" :
+                 hw->bus.speed == fm10k_bus_speed_2500 ? "2.5GT/s" :
+                 "Unknown"),
+                (hw->bus.width == fm10k_bus_width_pcie_x8 ? "x8" :
+                 hw->bus.width == fm10k_bus_width_pcie_x4 ? "x4" :
+                 hw->bus.width == fm10k_bus_width_pcie_x1 ? "x1" :
+                 "Unknown"),
+                (hw->bus.payload == fm10k_bus_payload_128 ? "128B" :
+                 hw->bus.payload == fm10k_bus_payload_256 ? "256B" :
+                 hw->bus.payload == fm10k_bus_payload_512 ? "512B" :
+                 "Unknown"));
+
+       /* print warning for non-optimal configurations */
+       fm10k_slot_warn(interface);
+
        return 0;
 
+err_register:
+err_sw_init:
+       iounmap(interface->uc_addr);
+err_ioremap:
+       free_netdev(netdev);
+err_alloc_netdev:
+       pci_release_selected_regions(pdev,
+                                    pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
        pci_disable_device(pdev);
@@ -141,6 +356,17 @@ err_dma:
  **/
 static void fm10k_remove(struct pci_dev *pdev)
 {
+       struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+       struct net_device *netdev = interface->netdev;
+
+       /* free netdev, this may bounce the interrupts due to setup_tc */
+       if (netdev->reg_state == NETREG_REGISTERED)
+               unregister_netdev(netdev);
+
+       iounmap(interface->uc_addr);
+
+       free_netdev(netdev);
+
        pci_release_selected_regions(pdev,
                                     pci_select_bars(pdev, IORESOURCE_MEM));