{ USB_DEVICE(0x0b05, 0x17d0) },
{ USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
- { USB_DEVICE(0x0CF3, 0x3005) },
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x0CF3, 0x311E) },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
BT_ERR("Non-link packet received in non-active state");
h5_reset_rx(h5);
+ return 0;
}
h5->rx_func = h5_rx_payload;
if (status)
goto err_htc_stop;
- ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+ if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features))
+ ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1;
+ else
+ ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1;
+
INIT_LIST_HEAD(&ar->arvifs);
if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags))
int msdu_len, msdu_chaining = 0;
struct sk_buff *msdu;
struct htt_rx_desc *rx_desc;
- bool corrupted = false;
lockdep_assert_held(&htt->rx_ring.lock);
last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) &
RX_MSDU_END_INFO0_LAST_MSDU;
- if (msdu_chaining && !last_msdu)
- corrupted = true;
-
if (last_msdu) {
msdu->next = NULL;
break;
if (*head_msdu == NULL)
msdu_chaining = -1;
- /*
- * Apparently FW sometimes reports weird chained MSDU sequences with
- * more than one rx descriptor. This seems like a bug but needs more
- * analyzing. For the time being fix it by dropping such sequences to
- * avoid blowing up the host system.
- */
- if (corrupted) {
- ath10k_warn("failed to pop chained msdus, dropping\n");
- ath10k_htt_rx_free_msdu_chain(*head_msdu);
- *head_msdu = NULL;
- *tail_msdu = NULL;
- msdu_chaining = -EINVAL;
- }
-
/*
* Don't refill the ring yet.
*
choice
prompt "Supported bus types"
depends on B43
- default B43_BCMA_AND_SSB
+ default B43_BUSES_BCMA_AND_SSB
config B43_BUSES_BCMA_AND_SSB
bool "BCMA and SSB"
/* We don't support 5 GHz on some PHYs yet */
switch (dev->phy.type) {
case B43_PHYTYPE_A:
+ case B43_PHYTYPE_G:
case B43_PHYTYPE_N:
case B43_PHYTYPE_LP:
case B43_PHYTYPE_HT:
break;
case B43_PHYTYPE_G:
status.band = IEEE80211_BAND_2GHZ;
- /* chanid is the radio channel cookie value as used
- * to tune the radio. */
- status.freq = chanid + 2400;
+ /* Somewhere between 478.104 and 508.1084 firmware for G-PHY
+ * has been modified to be compatible with N-PHY and others.
+ */
+ if (dev->fw.rev >= 508)
+ status.freq = ieee80211_channel_to_frequency(chanid, status.band);
+ else
+ status.freq = chanid + 2400;
break;
case B43_PHYTYPE_N:
case B43_PHYTYPE_LP:
bus->bus_priv.usb = bus_pub;
dev_set_drvdata(dev, bus);
bus->ops = &brcmf_usb_bus_ops;
- bus->chip = bus_pub->devid;
- bus->chiprev = bus_pub->chiprev;
bus->proto_type = BRCMF_PROTO_BCDC;
bus->always_use_fws_queue = true;
if (ret)
goto fail;
}
+ bus->chip = bus_pub->devid;
+ bus->chiprev = bus_pub->chiprev;
+
/* request firmware here */
brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
brcmf_usb_probe_phase2);
skb_reserve(skb_aggr, headroom + sizeof(struct txpd));
tx_info_aggr = MWIFIEX_SKB_TXCB(skb_aggr);
+ memset(tx_info_aggr, 0, sizeof(*tx_info_aggr));
tx_info_aggr->bss_type = tx_info_src->bss_type;
tx_info_aggr->bss_num = tx_info_src->bss_num;
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = pkt_len;
if (skb) {
rx_info = MWIFIEX_SKB_RXCB(skb);
+ memset(rx_info, 0, sizeof(*rx_info));
rx_info->bss_num = priv->bss_num;
rx_info->bss_type = priv->bss_type;
}
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = skb->len;
return -1;
}
mapping.len = size;
- memcpy(skb->cb, &mapping, sizeof(mapping));
+ mwifiex_store_mapping(skb, &mapping);
return 0;
}
struct pcie_service_card *card = adapter->card;
struct mwifiex_dma_mapping mapping;
- MWIFIEX_SKB_PACB(skb, &mapping);
+ mwifiex_get_mapping(skb, &mapping);
pci_unmap_single(card->dev, mapping.addr, mapping.len, flags);
}
return -1;
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->pkt_len = data_len - (sizeof(struct txpd) + INTF_HEADER_LEN);
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
skb->priority = MWIFIEX_PRIO_VI;
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
return -1;
}
+ memset(rx_info, 0, sizeof(*rx_info));
rx_info->bss_num = priv->bss_num;
rx_info->bss_type = priv->bss_type;
}
tx_info = MWIFIEX_SKB_TXCB(skb);
+ memset(tx_info, 0, sizeof(*tx_info));
tx_info->bss_num = priv->bss_num;
tx_info->bss_type = priv->bss_type;
tx_info->flags |= MWIFIEX_BUF_FLAG_BRIDGED_PKT;
#ifndef _MWIFIEX_UTIL_H_
#define _MWIFIEX_UTIL_H_
+struct mwifiex_dma_mapping {
+ dma_addr_t addr;
+ size_t len;
+};
+
+struct mwifiex_cb {
+ struct mwifiex_dma_mapping dma_mapping;
+ union {
+ struct mwifiex_rxinfo rx_info;
+ struct mwifiex_txinfo tx_info;
+ };
+};
+
static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb)
{
- return (struct mwifiex_rxinfo *)(skb->cb + sizeof(dma_addr_t));
+ struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+ BUILD_BUG_ON(sizeof(struct mwifiex_cb) > sizeof(skb->cb));
+ return &cb->rx_info;
}
static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb)
{
- return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t));
+ struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+ return &cb->tx_info;
}
-struct mwifiex_dma_mapping {
- dma_addr_t addr;
- size_t len;
-};
+static inline void mwifiex_store_mapping(struct sk_buff *skb,
+ struct mwifiex_dma_mapping *mapping)
+{
+ struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+ memcpy(&cb->dma_mapping, mapping, sizeof(*mapping));
+}
-static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb,
- struct mwifiex_dma_mapping *mapping)
+static inline void mwifiex_get_mapping(struct sk_buff *skb,
+ struct mwifiex_dma_mapping *mapping)
{
- memcpy(mapping, skb->cb, sizeof(*mapping));
+ struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+ memcpy(mapping, &cb->dma_mapping, sizeof(*mapping));
}
static inline dma_addr_t MWIFIEX_SKB_DMA_ADDR(struct sk_buff *skb)
{
struct mwifiex_dma_mapping mapping;
- MWIFIEX_SKB_PACB(skb, &mapping);
+ mwifiex_get_mapping(skb, &mapping);
return mapping.addr;
}
/*
* Detect if this device has an hardware controlled radio.
*/
- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) {
__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+ /*
+ * On this device RFKILL initialized during probe does not work.
+ */
+ __set_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags);
+ }
/*
* Check if the BBP tuning should be enabled.
/*
* Firmware functions
*/
+static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
+{
+ __le32 *reg;
+ u32 fw_mode;
+
+ reg = kmalloc(sizeof(*reg), GFP_KERNEL);
+ if (reg == NULL)
+ return -ENOMEM;
+ /* cannot use rt2x00usb_register_read here as it uses different
+ * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
+ * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
+ * returned value would be invalid.
+ */
+ rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
+ USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN,
+ reg, sizeof(*reg), REGISTER_TIMEOUT_FIRMWARE);
+ fw_mode = le32_to_cpu(*reg);
+ kfree(reg);
+
+ if ((fw_mode & 0x00000003) == 2)
+ return 1;
+
+ return 0;
+}
+
static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
{
return FIRMWARE_RT2870;
int status;
u32 offset;
u32 length;
+ int retval;
/*
* Check which section of the firmware we need.
/*
* Write firmware to device.
*/
- rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
- data + offset, length);
+ retval = rt2800usb_autorun_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval) {
+ rt2x00_info(rt2x00dev,
+ "Firmware loading not required - NIC in AutoRun mode\n");
+ } else {
+ rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+ data + offset, length);
+ }
rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
/*
* Device probe functions.
*/
+static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+
+ retval = rt2800usb_autorun_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval)
+ return 1;
+ return rt2800_efuse_detect(rt2x00dev);
+}
+
static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
int retval;
- if (rt2800_efuse_detect(rt2x00dev))
+ retval = rt2800usb_efuse_detect(rt2x00dev);
+ if (retval < 0)
+ return retval;
+ if (retval)
retval = rt2800_read_eeprom_efuse(rt2x00dev);
else
retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
REQUIRE_SW_SEQNO,
REQUIRE_HT_TX_DESC,
REQUIRE_PS_AUTOWAKE,
+ REQUIRE_DELAYED_RFKILL,
/*
* Capabilities
return;
/*
- * Unregister extra components.
+ * Stop rfkill polling.
*/
- rt2x00rfkill_unregister(rt2x00dev);
+ if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+ rt2x00rfkill_unregister(rt2x00dev);
/*
* Allow the HW to uninitialize.
set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
+ /*
+ * Start rfkill polling.
+ */
+ if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+ rt2x00rfkill_register(rt2x00dev);
+
return 0;
}
rt2x00link_register(rt2x00dev);
rt2x00leds_register(rt2x00dev);
rt2x00debug_register(rt2x00dev);
- rt2x00rfkill_register(rt2x00dev);
+
+ /*
+ * Start rfkill polling.
+ */
+ if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+ rt2x00rfkill_register(rt2x00dev);
return 0;
{
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+ /*
+ * Stop rfkill polling.
+ */
+ if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+ rt2x00rfkill_unregister(rt2x00dev);
+
/*
* Disable radio.
*/
crypto.cipher = rt2x00crypto_key_to_cipher(key);
if (crypto.cipher == CIPHER_NONE)
return -EOPNOTSUPP;
+ if (crypto.cipher == CIPHER_TKIP && rt2x00_is_usb(rt2x00dev))
+ return -EOPNOTSUPP;
crypto.cmd = cmd;
USB_MODE_SLEEP = 7, /* RT73USB */
USB_MODE_FIRMWARE = 8, /* RT73USB */
USB_MODE_WAKEUP = 9, /* RT73USB */
+ USB_MODE_AUTORUN = 17, /* RT2800USB */
};
/**
{
struct hci_conn *conn = container_of(work, struct hci_conn,
disc_work.work);
+ int refcnt = atomic_read(&conn->refcnt);
BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
- if (atomic_read(&conn->refcnt))
+ WARN_ON(refcnt < 0);
+
+ /* FIXME: It was observed that in pairing failed scenario, refcnt
+ * drops below 0. Probably this is because l2cap_conn_del calls
+ * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
+ * dropped. After that loop hci_chan_del is called which also drops
+ * conn. For now make sure that ACL is alive if refcnt is higher then 0,
+ * otherwise drop it.
+ */
+ if (refcnt > 0)
return;
switch (conn->state) {
if (hci_update_random_address(req, false, &own_addr_type))
return;
- /* Save the address type used for this connnection attempt so we able
- * to retrieve this information if we need it.
- */
- conn->src_type = own_addr_type;
-
cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
cp.scan_window = cpu_to_le16(hdev->le_scan_window);
bacpy(&cp.peer_addr, &conn->dst);
/* If we're already encrypted set the REAUTH_PEND flag,
* otherwise set the ENCRYPT_PEND.
*/
- if (conn->key_type != 0xff)
+ if (conn->link_mode & HCI_LM_ENCRYPT)
set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
else
set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
smp_mb__after_atomic(); /* wake_up_bit advises about this barrier */
wake_up_bit(&hdev->flags, HCI_INQUIRY);
+ hci_dev_lock(hdev);
+ hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+ hci_dev_unlock(hdev);
+
hci_conn_check_pending(hdev);
}
cp.authentication = conn->auth_type;
/* Request MITM protection if our IO caps allow it
- * except for the no-bonding case
+ * except for the no-bonding case.
+ * conn->auth_type is not updated here since
+ * that might cause the user confirmation to be
+ * rejected in case the remote doesn't have the
+ * IO capabilities for MITM.
*/
if (conn->io_capability != HCI_IO_NO_INPUT_OUTPUT &&
cp.authentication != HCI_AT_NO_BONDING)
/* If we're not the initiators request authorization to
* proceed from user space (mgmt_user_confirm with
- * confirm_hint set to 1). */
- if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
+ * confirm_hint set to 1). The exception is if neither
+ * side had MITM in which case we do auto-accept.
+ */
+ if (!test_bit(HCI_CONN_AUTH_PEND, &conn->flags) &&
+ (loc_mitm || rem_mitm)) {
BT_DBG("Confirming auto-accept as acceptor");
confirm_hint = 1;
goto confirm;
kfree_skb(conn->rx_skb);
skb_queue_purge(&conn->pending_rx);
- flush_work(&conn->pending_rx_work);
+
+ /* We can not call flush_work(&conn->pending_rx_work) here since we
+ * might block if we are running on a worker from the same workqueue
+ * pending_rx_work is waiting on.
+ */
+ if (work_pending(&conn->pending_rx_work))
+ cancel_work_sync(&conn->pending_rx_work);
l2cap_unregister_all_users(conn);
/*change security for LE channels */
if (chan->scid == L2CAP_CID_ATT) {
- if (!conn->hcon->out) {
- err = -EINVAL;
- break;
- }
-
if (smp_conn_security(conn->hcon, sec.level))
break;
sk->sk_state = BT_CONFIG;
}
}
+static void hci_stop_discovery(struct hci_request *req)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct hci_cp_remote_name_req_cancel cp;
+ struct inquiry_entry *e;
+
+ switch (hdev->discovery.state) {
+ case DISCOVERY_FINDING:
+ if (test_bit(HCI_INQUIRY, &hdev->flags)) {
+ hci_req_add(req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
+ } else {
+ cancel_delayed_work(&hdev->le_scan_disable);
+ hci_req_add_le_scan_disable(req);
+ }
+
+ break;
+
+ case DISCOVERY_RESOLVING:
+ e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY,
+ NAME_PENDING);
+ if (!e)
+ return;
+
+ bacpy(&cp.bdaddr, &e->data.bdaddr);
+ hci_req_add(req, HCI_OP_REMOTE_NAME_REQ_CANCEL, sizeof(cp),
+ &cp);
+
+ break;
+
+ default:
+ /* Passive scanning */
+ if (test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+ hci_req_add_le_scan_disable(req);
+ break;
+ }
+}
+
static int clean_up_hci_state(struct hci_dev *hdev)
{
struct hci_request req;
if (test_bit(HCI_ADVERTISING, &hdev->dev_flags))
disable_advertising(&req);
- if (test_bit(HCI_LE_SCAN, &hdev->dev_flags)) {
- hci_req_add_le_scan_disable(&req);
- }
+ hci_stop_discovery(&req);
list_for_each_entry(conn, &hdev->conn_hash.list, list) {
struct hci_cp_disconnect dc;
}
if (addr->type == BDADDR_LE_PUBLIC || addr->type == BDADDR_LE_RANDOM) {
- /* Continue with pairing via SMP */
+ /* Continue with pairing via SMP. The hdev lock must be
+ * released as SMP may try to recquire it for crypto
+ * purposes.
+ */
+ hci_dev_unlock(hdev);
err = smp_user_confirm_reply(conn, mgmt_op, passkey);
+ hci_dev_lock(hdev);
if (!err)
err = cmd_complete(sk, hdev->id, mgmt_op,
{
struct mgmt_cp_stop_discovery *mgmt_cp = data;
struct pending_cmd *cmd;
- struct hci_cp_remote_name_req_cancel cp;
- struct inquiry_entry *e;
struct hci_request req;
int err;
hci_req_init(&req, hdev);
- switch (hdev->discovery.state) {
- case DISCOVERY_FINDING:
- if (test_bit(HCI_INQUIRY, &hdev->flags)) {
- hci_req_add(&req, HCI_OP_INQUIRY_CANCEL, 0, NULL);
- } else {
- cancel_delayed_work(&hdev->le_scan_disable);
-
- hci_req_add_le_scan_disable(&req);
- }
-
- break;
+ hci_stop_discovery(&req);
- case DISCOVERY_RESOLVING:
- e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY,
- NAME_PENDING);
- if (!e) {
- mgmt_pending_remove(cmd);
- err = cmd_complete(sk, hdev->id,
- MGMT_OP_STOP_DISCOVERY, 0,
- &mgmt_cp->type,
- sizeof(mgmt_cp->type));
- hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
- goto unlock;
- }
-
- bacpy(&cp.bdaddr, &e->data.bdaddr);
- hci_req_add(&req, HCI_OP_REMOTE_NAME_REQ_CANCEL, sizeof(cp),
- &cp);
-
- break;
-
- default:
- BT_DBG("unknown discovery state %u", hdev->discovery.state);
-
- mgmt_pending_remove(cmd);
- err = cmd_complete(sk, hdev->id, MGMT_OP_STOP_DISCOVERY,
- MGMT_STATUS_FAILED, &mgmt_cp->type,
- sizeof(mgmt_cp->type));
+ err = hci_req_run(&req, stop_discovery_complete);
+ if (!err) {
+ hci_discovery_set_state(hdev, DISCOVERY_STOPPING);
goto unlock;
}
- err = hci_req_run(&req, stop_discovery_complete);
- if (err < 0)
- mgmt_pending_remove(cmd);
- else
- hci_discovery_set_state(hdev, DISCOVERY_STOPPING);
+ mgmt_pending_remove(cmd);
+
+ /* If no HCI commands were sent we're done */
+ if (err == -ENODATA) {
+ err = cmd_complete(sk, hdev->id, MGMT_OP_STOP_DISCOVERY, 0,
+ &mgmt_cp->type, sizeof(mgmt_cp->type));
+ hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+ }
unlock:
hci_dev_unlock(hdev);
{ CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP },
};
+static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io)
+{
+ /* If either side has unknown io_caps, use JUST WORKS */
+ if (local_io > SMP_IO_KEYBOARD_DISPLAY ||
+ remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ return JUST_WORKS;
+
+ return gen_method[remote_io][local_io];
+}
+
static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth,
u8 local_io, u8 remote_io)
{
BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io);
/* If neither side wants MITM, use JUST WORKS */
- /* If either side has unknown io_caps, use JUST WORKS */
/* Otherwise, look up method from the table */
- if (!(auth & SMP_AUTH_MITM) ||
- local_io > SMP_IO_KEYBOARD_DISPLAY ||
- remote_io > SMP_IO_KEYBOARD_DISPLAY)
+ if (!(auth & SMP_AUTH_MITM))
method = JUST_WORKS;
else
- method = gen_method[remote_io][local_io];
+ method = get_auth_method(smp, local_io, remote_io);
/* If not bonding, don't ask user to confirm a Zero TK */
if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM)
hci_le_start_enc(hcon, ediv, rand, stk);
hcon->enc_key_size = smp->enc_key_size;
} else {
- u8 stk[16];
+ u8 stk[16], auth;
__le64 rand = 0;
__le16 ediv = 0;
memset(stk + smp->enc_key_size, 0,
SMP_MAX_ENC_KEY_SIZE - smp->enc_key_size);
+ if (hcon->pending_sec_level == BT_SECURITY_HIGH)
+ auth = 1;
+ else
+ auth = 0;
+
hci_add_ltk(hcon->hdev, &hcon->dst, hcon->dst_type,
- HCI_SMP_STK_SLAVE, 0, stk, smp->enc_key_size,
+ HCI_SMP_STK_SLAVE, auth, stk, smp->enc_key_size,
ediv, rand);
}
{
struct smp_cmd_pairing rsp, *req = (void *) skb->data;
struct smp_chan *smp;
- u8 key_size, auth;
+ u8 key_size, auth, sec_level;
int ret;
BT_DBG("conn %p", conn);
/* We didn't start the pairing, so match remote */
auth = req->auth_req;
- conn->hcon->pending_sec_level = authreq_to_seclevel(auth);
+ sec_level = authreq_to_seclevel(auth);
+ if (sec_level > conn->hcon->pending_sec_level)
+ conn->hcon->pending_sec_level = sec_level;
+
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, conn->hcon->io_capability,
+ req->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
build_pairing_cmd(conn, req, &rsp, auth);
if (check_enc_key_size(conn, key_size))
return SMP_ENC_KEY_SIZE;
+ /* If we need MITM check that it can be acheived */
+ if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) {
+ u8 method;
+
+ method = get_auth_method(smp, req->io_capability,
+ rsp->io_capability);
+ if (method == JUST_WORKS || method == JUST_CFM)
+ return SMP_AUTH_REQUIREMENTS;
+ }
+
get_random_bytes(smp->prnd, sizeof(smp->prnd));
smp->prsp[0] = SMP_CMD_PAIRING_RSP;
struct smp_cmd_pairing cp;
struct hci_conn *hcon = conn->hcon;
struct smp_chan *smp;
+ u8 sec_level;
BT_DBG("conn %p", conn);
if (!(conn->hcon->link_mode & HCI_LM_MASTER))
return SMP_CMD_NOTSUPP;
- hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req);
+ sec_level = authreq_to_seclevel(rp->auth_req);
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
return 0;
if (smp_sufficient_security(hcon, sec_level))
return 1;
+ if (sec_level > hcon->pending_sec_level)
+ hcon->pending_sec_level = sec_level;
+
if (hcon->link_mode & HCI_LM_MASTER)
- if (smp_ltk_encrypt(conn, sec_level))
- goto done;
+ if (smp_ltk_encrypt(conn, hcon->pending_sec_level))
+ return 0;
if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags))
return 0;
* requires it.
*/
if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT ||
- sec_level > BT_SECURITY_MEDIUM)
+ hcon->pending_sec_level > BT_SECURITY_MEDIUM)
authreq |= SMP_AUTH_MITM;
if (hcon->link_mode & HCI_LM_MASTER) {
set_bit(SMP_FLAG_INITIATOR, &smp->flags);
-done:
- hcon->pending_sec_level = sec_level;
-
return 0;
}
if (ieee80211_has_order(hdr->frame_control))
return TX_CONTINUE;
+ if (ieee80211_is_probe_req(hdr->frame_control))
+ return TX_CONTINUE;
+
if (tx->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
info->hw_queue = tx->sdata->vif.cab_queue;
{
struct sta_info *sta = tx->sta;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
struct ieee80211_local *local = tx->local;
if (unlikely(!sta))
!(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) {
int ac = skb_get_queue_mapping(tx->skb);
+ if (ieee80211_is_mgmt(hdr->frame_control) &&
+ !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) {
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+ return TX_CONTINUE;
+ }
+
ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n",
sta->sta.addr, sta->sta.aid, ac);
if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx)
{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
-
if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED))
return TX_CONTINUE;
- if (ieee80211_is_mgmt(hdr->frame_control) &&
- !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) {
- if (tx->flags & IEEE80211_TX_UNICAST)
- info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
- return TX_CONTINUE;
- }
-
if (tx->flags & IEEE80211_TX_UNICAST)
return ieee80211_tx_h_unicast_ps_buf(tx);
else
int err;
/* 24 + 6 = header + auth_algo + auth_transaction + status_code */
- skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len);
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN +
+ 24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN);
if (!skb)
return;
- skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6);
memset(mgmt, 0, 24 + 6);
if (end >= start)
return jiffies_to_msecs(end - start);
- return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1);
+ return jiffies_to_msecs(end + (ULONG_MAX - start) + 1);
}
void
}
CMD(start_p2p_device, START_P2P_DEVICE);
CMD(set_mcast_rate, SET_MCAST_RATE);
+#ifdef CONFIG_NL80211_TESTMODE
+ CMD(testmode_cmd, TESTMODE);
+#endif
if (state->split) {
CMD(crit_proto_start, CRIT_PROTOCOL_START);
CMD(crit_proto_stop, CRIT_PROTOCOL_STOP);
if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)
CMD(channel_switch, CHANNEL_SWITCH);
+ CMD(set_qos_map, SET_QOS_MAP);
}
- CMD(set_qos_map, SET_QOS_MAP);
-
-#ifdef CONFIG_NL80211_TESTMODE
- CMD(testmode_cmd, TESTMODE);
-#endif
-
+ /* add into the if now */
#undef CMD
if (rdev->ops->connect || rdev->ops->auth) {
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
- bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5));
+ bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20));
if (band_rule_found && bw_fits)
return rr;
}
#endif
-/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency
- * chan->center_freq fits there.
- * If there is no such reg_rule, disable the channel, otherwise set the
- * flags corresponding to the bandwidths allowed in the particular reg_rule
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel).
*/
static void handle_channel(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator,
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
if (reg_rule->flags & NL80211_RRF_AUTO_BW)
max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule);
- if (max_bandwidth_khz < MHZ_TO_KHZ(10))
- bw_flags = IEEE80211_CHAN_NO_10MHZ;
- if (max_bandwidth_khz < MHZ_TO_KHZ(20))
- bw_flags |= IEEE80211_CHAN_NO_20MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(40))
- bw_flags |= IEEE80211_CHAN_NO_HT40;
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (max_bandwidth_khz < MHZ_TO_KHZ(80))
bw_flags |= IEEE80211_CHAN_NO_80MHZ;
if (max_bandwidth_khz < MHZ_TO_KHZ(160))
MAC_ASSIGN(addr, addr);
__entry->key_type = key_type;
__entry->key_id = key_id;
- memcpy(__entry->tsc, tsc, 6);
+ if (tsc)
+ memcpy(__entry->tsc, tsc, 6);
),
TP_printk(NETDEV_PR_FMT ", " MAC_PR_FMT ", key type: %d, key id: %d, tsc: %pm",
NETDEV_PR_ARG, MAC_PR_ARG(addr), __entry->key_type,
projects / karo-tx-linux.git / commitdiff