]> git.karo-electronics.de Git - linux-beck.git/commitdiff
Staging: ipack: added support for the TEWS TPCI-200 carrier board
authorSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Wed, 9 May 2012 13:27:20 +0000 (15:27 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 9 May 2012 21:15:15 +0000 (14:15 -0700)
Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/ipack/Kconfig
drivers/staging/ipack/Makefile
drivers/staging/ipack/TODO
drivers/staging/ipack/bridges/Kconfig [new file with mode: 0644]
drivers/staging/ipack/bridges/Makefile [new file with mode: 0644]
drivers/staging/ipack/bridges/tpci200.c [new file with mode: 0644]
drivers/staging/ipack/bridges/tpci200.h [new file with mode: 0644]

index e20187f6c268e7383a91f3a2876cd8e525729042..30b28fe4f85f83f6240df284afbd4e4f8aab67d8 100644 (file)
@@ -7,3 +7,8 @@ menuconfig IPACK_BUS
        ---help---
          If you say Y here you get support for the IndustryPack Framework.
 
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+endif # IPACK
index 56e2340d3660b257f2495e2511413cebaa67e650..59b8762ad7c5dd2a97a9657cf2be7e5efd13a766 100644 (file)
@@ -2,3 +2,4 @@
 # Makefile for the IPACK bridge device drivers.
 #
 obj-$(CONFIG_IPACK_BUS)                += ipack.o
+obj-y                          += bridges/
index 167ae4daf486317597a90f2e1437384726963919..d5a5735677dc2fd2df6a9413a93da1a6db2b0b51 100644 (file)
@@ -12,6 +12,16 @@ operations between the two kind of boards.
 TODO
 ====
 
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+  No autodetection supported yet, because the mezzanine driver could not be
+  loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+  and use driver_for_each_device() instead.
+
 Ipack
 -----
 
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
new file mode 100644 (file)
index 0000000..97c837e
--- /dev/null
@@ -0,0 +1,8 @@
+config BOARD_TPCI200
+       tristate "TEWS TPCI-200 support for IndustryPack bus"
+       depends on IPACK_BUS
+       depends on PCI
+       help
+         This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+       default n
+
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile
new file mode 100644 (file)
index 0000000..d8b7645
--- /dev/null
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
new file mode 100644 (file)
index 0000000..6aeb660
--- /dev/null
@@ -0,0 +1,1183 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "tpci200.h"
+
+struct ipack_bus_ops tpci200_bus_ops;
+
+/* TPCI200 controls registers */
+static int control_reg[] = {
+       TPCI200_CONTROL_A_REG,
+       TPCI200_CONTROL_B_REG,
+       TPCI200_CONTROL_C_REG,
+       TPCI200_CONTROL_D_REG
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(tpci200_list);
+
+static int tpci200_slot_unregister(struct ipack_device *dev);
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+       struct tpci200_board *tpci200;
+       int found = 0;
+
+       if (dev == NULL) {
+               pr_info("Slot doesn't exist.\n");
+               return NULL;
+       }
+
+       list_for_each_entry(tpci200, &tpci200_list, list) {
+               if (tpci200->number == dev->bus_nr) {
+                       found = 1;
+                       break;
+               }
+       }
+
+       if (!found) {
+               pr_err("Carrier not found\n");
+               return NULL;
+       }
+
+       if (dev->slot >= TPCI200_NB_SLOT) {
+               pr_info("Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+                       TPCI200_SHORTNAME, dev->bus_nr, dev->slot,
+                       TPCI200_NB_SLOT-1);
+               return NULL;
+       }
+
+       BUG_ON(tpci200->slots == NULL);
+       if (tpci200->slots[dev->slot].dev == NULL) {
+               pr_info("Slot [%s %d:%d] is not registered !\n",
+                       TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+               return NULL;
+       }
+
+       return tpci200;
+}
+
+static inline unsigned char __tpci200_read8(void *address, unsigned long offset)
+{
+       return ioread8(address + (offset^1));
+}
+
+static inline unsigned short __tpci200_read16(void *address,
+                                             unsigned long offset)
+{
+       return ioread16(address + offset);
+}
+
+static inline unsigned int __tpci200_read32(void *address, unsigned long offset)
+{
+       return swahw32(ioread32(address + offset));
+}
+
+static inline void __tpci200_write8(unsigned char value,
+                                   void *address, unsigned long offset)
+{
+       iowrite8(value, address+(offset^1));
+}
+
+static inline void __tpci200_write16(unsigned short value, void *address,
+                                    unsigned long offset)
+{
+       iowrite16(value, address+offset);
+}
+
+static inline void __tpci200_write32(unsigned int value, void *address,
+                                    unsigned long offset)
+{
+       iowrite32(swahw32(value), address+offset);
+}
+
+static struct ipack_addr_space *get_slot_address_space(struct ipack_device *dev,
+                                                      int space)
+{
+       struct ipack_addr_space *addr;
+
+       switch (space) {
+       case IPACK_IO_SPACE:
+               addr = &dev->io_space;
+               break;
+       case IPACK_ID_SPACE:
+               addr = &dev->id_space;
+               break;
+       case IPACK_MEM_SPACE:
+               addr = &dev->mem_space;
+               break;
+       default:
+               pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+                      TPCI200_SHORTNAME, dev->bus_nr, dev->slot, space);
+               return NULL;
+               break;
+       }
+
+       if ((addr->size == 0) || (addr->address == NULL)) {
+               pr_err("Error, slot space not mapped !\n");
+               return NULL;
+       }
+
+       return addr;
+}
+
+static int tpci200_read8(struct ipack_device *dev, int space,
+                        unsigned long offset, unsigned char *value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if (offset >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+
+       *value = __tpci200_read8(addr->address, offset);
+
+       return 0;
+}
+
+static int tpci200_read16(struct ipack_device *dev, int space,
+                         unsigned long offset, unsigned short *value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if ((offset+2) >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+       *value = __tpci200_read16(addr->address, offset);
+
+       return 0;
+}
+
+static int tpci200_read32(struct ipack_device *dev, int space,
+                         unsigned long offset, unsigned int *value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if ((offset+4) >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+
+       *value = __tpci200_read32(addr->address, offset);
+
+       return 0;
+}
+
+static int tpci200_write8(struct ipack_device *dev, int space,
+                         unsigned long offset, unsigned char value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if (offset >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+
+       __tpci200_write8(value, addr->address, offset);
+
+       return 0;
+}
+
+static int tpci200_write16(struct ipack_device *dev, int space,
+                          unsigned long offset, unsigned short value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if ((offset+2) >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+
+       __tpci200_write16(value, addr->address, offset);
+
+       return 0;
+}
+
+static int tpci200_write32(struct ipack_device *dev, int space,
+                          unsigned long offset, unsigned int value)
+{
+       struct ipack_addr_space *addr;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       addr = get_slot_address_space(dev, space);
+       if (addr == NULL)
+               return -EINVAL;
+
+       if ((offset+4) >= addr->size) {
+               pr_err("Error, slot space offset error !\n");
+               return -EFAULT;
+       }
+
+       __tpci200_write32(value, addr->address, offset);
+
+       return 0;
+}
+
+static void tpci200_unregister(struct tpci200_board *tpci200)
+{
+       int i;
+
+       free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+       pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+       pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
+       pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
+
+       pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+       pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+       pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+       pci_disable_device(tpci200->info->pdev);
+       pci_dev_put(tpci200->info->pdev);
+
+       kfree(tpci200->info);
+
+       for (i = 0; i < TPCI200_NB_SLOT; i++) {
+               tpci200->slots[i].io_phys.address = NULL;
+               tpci200->slots[i].io_phys.size = 0;
+               tpci200->slots[i].id_phys.address = NULL;
+               tpci200->slots[i].id_phys.size = 0;
+               tpci200->slots[i].mem_phys.address = NULL;
+               tpci200->slots[i].mem_phys.size = 0;
+       }
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+       struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+       int i;
+       unsigned long flags;
+       unsigned short status_reg, reg_value;
+       unsigned short unhandled_ints = 0;
+       irqreturn_t ret = IRQ_NONE;
+
+       spin_lock_irqsave(&tpci200->info->access_lock, flags);
+
+       /* Read status register */
+       status_reg = readw((unsigned short *) (tpci200->info->interface_regs +
+                                              TPCI200_STATUS_REG));
+
+       if (status_reg & TPCI200_SLOT_INT_MASK) {
+               unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK;
+               /* callback to the IRQ handler for the corresponding slot */
+               for (i = 0; i < TPCI200_NB_SLOT; i++) {
+                       if ((tpci200->slots[i].irq != NULL) &&
+                           (status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)))) {
+
+                               ret = tpci200->slots[i].irq->handler(tpci200->slots[i].irq->arg);
+
+                               /* Dummy reads */
+                               readw((unsigned short *)
+                                     (tpci200->slots[i].dev->io_space.address +
+                                      0xC0));
+                               readw((unsigned short *)
+                                     (tpci200->slots[i].dev->io_space.address +
+                                      0xC2));
+
+                               unhandled_ints &= ~(((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)));
+                       }
+               }
+       }
+       /* Interrupt not handled are disabled */
+       if (unhandled_ints) {
+               for (i = 0; i < TPCI200_NB_SLOT; i++) {
+                       if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) {
+                               pr_info("No registered ISR for slot [%s %d:%d]!. IRQ will be disabled.\n",
+                                       TPCI200_SHORTNAME,
+                                       tpci200->number, i);
+                               reg_value = readw((unsigned short *)(tpci200->info->interface_regs +
+                                                                    control_reg[i]));
+                               reg_value &=
+                                       ~(TPCI200_INT0_EN | TPCI200_INT1_EN);
+                               writew(reg_value, (unsigned short *)(tpci200->info->interface_regs +
+                                                                    control_reg[i]));
+                       }
+               }
+       }
+
+       spin_unlock_irqrestore(&tpci200->info->access_lock, flags);
+       return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+static struct ipack_device *tpci200_slot_register(const char *board_name,
+                                                 int size,
+                                                 unsigned int tpci200_number,
+                                                 unsigned int slot_position)
+{
+       int found = 0;
+       struct ipack_device  *dev = NULL;
+       struct tpci200_board *tpci200;
+
+       list_for_each_entry(tpci200, &tpci200_list, list) {
+               if (tpci200->number == tpci200_number) {
+                       found = 1;
+                       break;
+               }
+       }
+
+       if (!found) {
+               pr_err("carrier board not found for the device\n");
+               return NULL;
+       }
+
+       if (slot_position >= TPCI200_NB_SLOT) {
+               pr_info("Slot [%s %d:%d] doesn't exist!\n",
+                       TPCI200_SHORTNAME, tpci200_number, slot_position);
+               goto out;
+       }
+
+       if (mutex_lock_interruptible(&tpci200->mutex))
+               goto out;
+
+       if (tpci200->slots[slot_position].dev != NULL) {
+               pr_err("Slot [%s %d:%d] already installed !\n",
+                      TPCI200_SHORTNAME, tpci200_number, slot_position);
+               goto out_unlock;
+       }
+
+       dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+       if (dev == NULL) {
+               pr_info("Slot [%s %d:%d] Unable to allocate memory for new slot !\n",
+                       TPCI200_SHORTNAME,
+                       tpci200_number, slot_position);
+               goto out_unlock;
+       }
+
+       if (size > IPACK_BOARD_NAME_SIZE) {
+               pr_warning("Slot [%s %d:%d] name (%s) too long (%d > %d). Will be truncated!\n",
+                          TPCI200_SHORTNAME, tpci200_number, slot_position,
+                          board_name, (int)strlen(board_name),
+                          IPACK_BOARD_NAME_SIZE);
+
+               size = IPACK_BOARD_NAME_SIZE;
+       }
+
+       strncpy(dev->board_name, board_name, size-1);
+       dev->board_name[size-1] = '\0';
+       dev->bus_nr = tpci200->info->drv.bus_nr;
+       dev->slot = slot_position;
+       /*
+        * Give the same IRQ number as the slot number.
+        * The TPCI200 has assigned his own two IRQ by PCI bus driver
+        */
+       dev->irq = slot_position;
+
+       dev->id_space.address = NULL;
+       dev->id_space.size = 0;
+       dev->io_space.address = NULL;
+       dev->io_space.size = 0;
+       dev->mem_space.address = NULL;
+       dev->mem_space.size = 0;
+
+       /* Give the operations structure */
+       dev->ops = &tpci200_bus_ops;
+       tpci200->slots[slot_position].dev = dev;
+
+       if (ipack_device_register(dev) < 0) {
+               tpci200_slot_unregister(dev);
+               kfree(dev);
+       }
+
+out_unlock:
+       mutex_unlock(&tpci200->mutex);
+out:
+       return dev;
+}
+
+static ssize_t tpci200_store_board(struct device *pdev, const char *buf,
+                                  size_t count, int slot)
+{
+       struct tpci200_board *card = dev_get_drvdata(pdev);
+       struct ipack_device *dev = card->slots[slot].dev;
+
+       if (dev != NULL)
+               return -EBUSY;
+
+       dev = tpci200_slot_register(buf, count, card->number, slot);
+       if (dev == NULL)
+               return -ENODEV;
+
+       return count;
+}
+
+static ssize_t tpci200_show_board(struct device *pdev, char *buf, int slot)
+{
+       struct tpci200_board *card = dev_get_drvdata(pdev);
+       struct ipack_device *dev = card->slots[slot].dev;
+
+       if (dev != NULL)
+               return snprintf(buf, PAGE_SIZE, "%s\n", dev->board_name);
+       else
+               return snprintf(buf, PAGE_SIZE, "none\n");
+}
+
+static ssize_t tpci200_show_description(struct device *pdev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       return snprintf(buf, PAGE_SIZE,
+                       "TEWS tpci200 carrier PCI for Industry-pack mezzanines.\n");
+}
+
+static ssize_t tpci200_show_board_slot0(struct device *pdev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       return tpci200_show_board(pdev, buf, 0);
+}
+
+static ssize_t tpci200_store_board_slot0(struct device *pdev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t count)
+{
+       return tpci200_store_board(pdev, buf, count, 0);
+}
+
+static ssize_t tpci200_show_board_slot1(struct device *pdev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       return tpci200_show_board(pdev, buf, 1);
+}
+
+static ssize_t tpci200_store_board_slot1(struct device *pdev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t count)
+{
+       return tpci200_store_board(pdev, buf, count, 1);
+}
+
+static ssize_t tpci200_show_board_slot2(struct device *pdev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       return tpci200_show_board(pdev, buf, 2);
+}
+
+static ssize_t tpci200_store_board_slot2(struct device *pdev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t count)
+{
+       return tpci200_store_board(pdev, buf, count, 2);
+}
+
+
+static ssize_t tpci200_show_board_slot3(struct device *pdev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       return tpci200_show_board(pdev, buf, 3);
+}
+
+static ssize_t tpci200_store_board_slot3(struct device *pdev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t count)
+{
+       return tpci200_store_board(pdev, buf, count, 3);
+}
+
+/* Declaration of the device attributes for the TPCI200 */
+static DEVICE_ATTR(description, S_IRUGO,
+                  tpci200_show_description, NULL);
+static DEVICE_ATTR(board_slot0, S_IRUGO | S_IWUSR,
+                  tpci200_show_board_slot0, tpci200_store_board_slot0);
+static DEVICE_ATTR(board_slot1, S_IRUGO | S_IWUSR,
+                  tpci200_show_board_slot1, tpci200_store_board_slot1);
+static DEVICE_ATTR(board_slot2, S_IRUGO | S_IWUSR,
+                  tpci200_show_board_slot2, tpci200_store_board_slot2);
+static DEVICE_ATTR(board_slot3, S_IRUGO | S_IWUSR,
+                  tpci200_show_board_slot3, tpci200_store_board_slot3);
+
+static struct attribute *tpci200_attrs[] = {
+       &dev_attr_description.attr,
+       &dev_attr_board_slot0.attr,
+       &dev_attr_board_slot1.attr,
+       &dev_attr_board_slot2.attr,
+       &dev_attr_board_slot3.attr,
+       NULL,
+};
+
+static struct attribute_group tpci200_attr_group = {
+       .attrs = tpci200_attrs,
+};
+
+static int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+       return sysfs_create_group(&card->info->pdev->dev.kobj,
+                                 &tpci200_attr_group);
+}
+
+static void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+       sysfs_remove_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+#else
+
+static int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+       return 0;
+}
+
+static void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+}
+
+#endif /* CONFIG_SYSFS */
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+       int  i;
+       int res;
+       unsigned long ioidint_base;
+       unsigned long mem_base;
+       unsigned short slot_ctrl;
+
+       if (pci_enable_device(tpci200->info->pdev) < 0)
+               return -ENODEV;
+
+       if (tpci200_create_sysfs_files(tpci200) < 0) {
+               pr_err("failed creating sysfs files\n");
+               res = -EFAULT;
+               goto out_disable_pci;
+       }
+
+       /* Request IP interface register (Bar 2) */
+       res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR,
+                                "Carrier IP interface registers");
+       if (res) {
+               pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !",
+                      tpci200->info->pdev->bus->number,
+                      tpci200->info->pdev->devfn);
+               goto out_remove_sysfs;
+       }
+
+       /* Request IO ID INT space (Bar 3) */
+       res = pci_request_region(tpci200->info->pdev,
+                                TPCI200_IO_ID_INT_SPACES_BAR,
+                                "Carrier IO ID INT space");
+       if (res) {
+               pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !",
+                      tpci200->info->pdev->bus->number,
+                      tpci200->info->pdev->devfn);
+               goto out_release_ip_space;
+       }
+
+       /* Request MEM space (Bar 4) */
+       res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR,
+                                "Carrier MEM space");
+       if (res) {
+               pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
+                      tpci200->info->pdev->bus->number,
+                      tpci200->info->pdev->devfn);
+               goto out_release_ioid_int_space;
+       }
+
+       /* Map internal tpci200 driver user space */
+       tpci200->info->interface_regs =
+               ioremap(pci_resource_start(tpci200->info->pdev,
+                                          TPCI200_IP_INTERFACE_BAR),
+                       TPCI200_IFACE_SIZE);
+       tpci200->info->ioidint_space =
+               ioremap(pci_resource_start(tpci200->info->pdev,
+                                          TPCI200_IO_ID_INT_SPACES_BAR),
+                       TPCI200_IOIDINT_SIZE);
+       tpci200->info->mem8_space =
+               ioremap(pci_resource_start(tpci200->info->pdev,
+                                          TPCI200_MEM8_SPACE_BAR),
+                       TPCI200_MEM8_SIZE);
+
+       spin_lock_init(&tpci200->info->access_lock);
+       ioidint_base = pci_resource_start(tpci200->info->pdev,
+                                         TPCI200_IO_ID_INT_SPACES_BAR);
+       mem_base = pci_resource_start(tpci200->info->pdev,
+                                     TPCI200_MEM8_SPACE_BAR);
+
+       /* Set the default parameters of the slot
+        * INT0 disabled, level sensitive
+        * INT1 disabled, level sensitive
+        * error interrupt disabled
+        * timeout interrupt disabled
+        * recover time disabled
+        * clock rate 8 MHz
+        */
+       slot_ctrl = 0;
+
+       /* Set all slot physical address space */
+       for (i = 0; i < TPCI200_NB_SLOT; i++) {
+               tpci200->slots[i].io_phys.address =
+                       (void *)ioidint_base +
+                       TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
+               tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
+
+               tpci200->slots[i].id_phys.address =
+                       (void *)ioidint_base +
+                       TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
+               tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
+
+               tpci200->slots[i].mem_phys.address =
+                       (void *)mem_base + TPCI200_MEM8_GAP*i;
+               tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
+
+               writew(slot_ctrl,
+                      (unsigned short *)(tpci200->info->interface_regs +
+                                         control_reg[i]));
+       }
+
+       res = request_irq(tpci200->info->pdev->irq,
+                         tpci200_interrupt, IRQF_SHARED,
+                         TPCI200_SHORTNAME, (void *) tpci200);
+       if (res) {
+               pr_err("(bn 0x%X, sn 0x%X) unable to register IRQ !",
+                      tpci200->info->pdev->bus->number,
+                      tpci200->info->pdev->devfn);
+               tpci200_unregister(tpci200);
+               goto out_err;
+       }
+
+       return 0;
+
+out_release_ioid_int_space:
+       pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+       pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_remove_sysfs:
+       tpci200_remove_sysfs_files(tpci200);
+out_disable_pci:
+       pci_disable_device(tpci200->info->pdev);
+out_err:
+       return res;
+}
+
+static int __tpci200_request_irq(struct tpci200_board *tpci200,
+                                struct ipack_device *dev)
+{
+       unsigned short slot_ctrl;
+
+       /* Set the default parameters of the slot
+        * INT0 enabled, level sensitive
+        * INT1 enabled, level sensitive
+        * error interrupt disabled
+        * timeout interrupt disabled
+        * recover time disabled
+        * clock rate 8 MHz
+        */
+       slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN;
+       writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs +
+                                            control_reg[dev->slot]));
+
+       return 0;
+}
+
+static void __tpci200_free_irq(struct tpci200_board *tpci200,
+                              struct ipack_device *dev)
+{
+       unsigned short slot_ctrl;
+
+       /* Set the default parameters of the slot
+        * INT0 disabled, level sensitive
+        * INT1 disabled, level sensitive
+        * error interrupt disabled
+        * timeout interrupt disabled
+        * recover time disabled
+        * clock rate 8 MHz
+        */
+       slot_ctrl = 0;
+       writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs +
+                                            control_reg[dev->slot]));
+}
+
+static int tpci200_free_irq(struct ipack_device *dev)
+{
+       int res;
+       struct slot_irq *slot_irq;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL) {
+               res = -EINVAL;
+               goto out;
+       }
+
+       if (mutex_lock_interruptible(&tpci200->mutex)) {
+               res = -ERESTARTSYS;
+               goto out;
+       }
+
+       if (tpci200->slots[dev->slot].irq == NULL) {
+               res = -EINVAL;
+               goto out_unlock;
+       }
+
+       __tpci200_free_irq(tpci200, dev);
+       slot_irq = tpci200->slots[dev->slot].irq;
+       tpci200->slots[dev->slot].irq = NULL;
+       kfree(slot_irq);
+
+out_unlock:
+       mutex_unlock(&tpci200->mutex);
+out:
+       return res;
+}
+
+static int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
+{
+       int res;
+       struct ipack_addr_space *virt_addr_space;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL) {
+               res = -EINVAL;
+               goto out;
+       }
+
+       if (mutex_lock_interruptible(&tpci200->mutex)) {
+               res = -ERESTARTSYS;
+               goto out;
+       }
+
+       switch (space) {
+       case IPACK_IO_SPACE:
+               if (dev->io_space.address == NULL) {
+                       pr_info("Slot [%s %d:%d] IO space not mapped !\n",
+                               TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+                       goto out_unlock;
+               }
+               virt_addr_space = &dev->io_space;
+               break;
+       case IPACK_ID_SPACE:
+               if (dev->id_space.address == NULL) {
+                       pr_info("Slot [%s %d:%d] ID space not mapped !\n",
+                               TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+                       goto out_unlock;
+               }
+               virt_addr_space = &dev->id_space;
+               break;
+       case IPACK_MEM_SPACE:
+               if (dev->mem_space.address == NULL) {
+                       pr_info("Slot [%s %d:%d] MEM space not mapped !\n",
+                               TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+               goto out_unlock;
+               }
+               virt_addr_space = &dev->mem_space;
+               break;
+       default:
+               pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+                      TPCI200_SHORTNAME, dev->bus_nr, dev->slot, space);
+               res = -EINVAL;
+               goto out_unlock;
+               break;
+       }
+
+       iounmap(virt_addr_space->address);
+
+       virt_addr_space->address = NULL;
+       virt_addr_space->size = 0;
+out_unlock:
+       mutex_unlock(&tpci200->mutex);
+out:
+       return res;
+}
+
+static int tpci200_slot_unregister(struct ipack_device *dev)
+{
+       struct tpci200_board *tpci200;
+
+       if (dev == NULL)
+               return -ENODEV;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL)
+               return -EINVAL;
+
+       tpci200_free_irq(dev);
+
+       if (mutex_lock_interruptible(&tpci200->mutex))
+               return -ERESTARTSYS;
+
+       ipack_device_unregister(dev);
+       kfree(dev);
+       tpci200->slots[dev->slot].dev = NULL;
+       mutex_unlock(&tpci200->mutex);
+
+       return 0;
+}
+
+static int tpci200_slot_map_space(struct ipack_device *dev,
+                                 unsigned int memory_size, int space)
+{
+       int res;
+       unsigned int size_to_map;
+       void *phys_address;
+       struct ipack_addr_space *virt_addr_space;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL) {
+               res = -EINVAL;
+               goto out;
+       }
+
+       if (mutex_lock_interruptible(&tpci200->mutex)) {
+               res = -ERESTARTSYS;
+               goto out;
+       }
+
+       switch (space) {
+       case IPACK_IO_SPACE:
+               if (dev->io_space.address != NULL) {
+                       pr_err("Slot [%s %d:%d] IO space already mapped !\n",
+                              TPCI200_SHORTNAME, tpci200->number, dev->slot);
+                       res = -EINVAL;
+                       goto out_unlock;
+               }
+               virt_addr_space = &dev->io_space;
+
+               phys_address = tpci200->slots[dev->slot].io_phys.address;
+               size_to_map = tpci200->slots[dev->slot].io_phys.size;
+               break;
+       case IPACK_ID_SPACE:
+               if (dev->id_space.address != NULL) {
+                       pr_err("Slot [%s %d:%d] ID space already mapped !\n",
+                              TPCI200_SHORTNAME, tpci200->number, dev->slot);
+                       res = -EINVAL;
+                       goto out_unlock;
+               }
+               virt_addr_space = &dev->id_space;
+
+               phys_address = tpci200->slots[dev->slot].id_phys.address;
+               size_to_map = tpci200->slots[dev->slot].id_phys.size;
+               break;
+       case IPACK_MEM_SPACE:
+               if (dev->mem_space.address != NULL) {
+                       pr_err("Slot [%s %d:%d] MEM space already mapped !\n",
+                              TPCI200_SHORTNAME,
+                              tpci200->number, dev->slot);
+                       res = -EINVAL;
+                       goto out_unlock;
+               }
+               virt_addr_space = &dev->mem_space;
+
+               if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
+                       pr_err("Slot [%s %d:%d] request is 0x%X memory, only 0x%X available !\n",
+                              TPCI200_SHORTNAME, dev->bus_nr, dev->slot,
+                              memory_size, tpci200->slots[dev->slot].mem_phys.size);
+                       res = -EINVAL;
+                       goto out_unlock;
+               }
+
+               phys_address = tpci200->slots[dev->slot].mem_phys.address;
+               size_to_map = memory_size;
+               break;
+       default:
+               pr_err("Slot [%s %d:%d] space %d doesn't exist !\n",
+                      TPCI200_SHORTNAME,
+                      tpci200->number, dev->slot, space);
+               res = -EINVAL;
+               goto out_unlock;
+               break;
+       }
+
+       virt_addr_space->size = size_to_map;
+       virt_addr_space->address =
+               ioremap((unsigned long)phys_address, size_to_map);
+
+out_unlock:
+       mutex_unlock(&tpci200->mutex);
+out:
+       return res;
+}
+
+static int tpci200_request_irq(struct ipack_device *dev, int vector,
+                              int (*handler)(void *), void *arg)
+{
+       int res;
+       struct slot_irq *slot_irq;
+       struct tpci200_board *tpci200;
+
+       tpci200 = check_slot(dev);
+       if (tpci200 == NULL) {
+               res = -EINVAL;
+               goto out;
+       }
+
+       if (mutex_lock_interruptible(&tpci200->mutex)) {
+               res = -ERESTARTSYS;
+               goto out;
+       }
+
+       if (tpci200->slots[dev->slot].irq != NULL) {
+               pr_err("Slot [%s %d:%d] IRQ already registered !\n",
+                      TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+               res = -EINVAL;
+               goto out_unlock;
+       }
+
+       slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+       if (slot_irq == NULL) {
+               pr_err("Slot [%s %d:%d] unable to allocate memory for IRQ !\n",
+                      TPCI200_SHORTNAME, dev->bus_nr, dev->slot);
+               res = -ENOMEM;
+               goto out_unlock;
+       }
+
+       /*
+        * WARNING: Setup Interrupt Vector in the IndustryPack device
+        * before an IRQ request.
+        * Read the User Manual of your IndustryPack device to know
+        * where to write the vector in memory.
+        */
+       slot_irq->vector = vector;
+       slot_irq->handler = handler;
+       slot_irq->arg = arg;
+       if (dev->board_name) {
+               if (strlen(dev->board_name) > IPACK_IRQ_NAME_SIZE) {
+                       pr_warning("Slot [%s %d:%d] IRQ name too long (%d char > %d char MAX). Will be truncated!\n",
+                                  TPCI200_SHORTNAME, dev->bus_nr, dev->slot,
+                                  (int)strlen(dev->board_name),
+                                  IPACK_IRQ_NAME_SIZE);
+               }
+               strncpy(slot_irq->name, dev->board_name, IPACK_IRQ_NAME_SIZE-1);
+       } else {
+               strcpy(slot_irq->name, "Unknown");
+       }
+
+       tpci200->slots[dev->slot].irq = slot_irq;
+       res = __tpci200_request_irq(tpci200, dev);
+
+out_unlock:
+       mutex_unlock(&tpci200->mutex);
+out:
+       return res;
+}
+
+static void tpci200_slot_remove(struct tpci200_slot *slot)
+{
+       if ((slot->dev == NULL) ||
+           (slot->dev->driver->ops->remove == NULL))
+               return;
+
+       slot->dev->driver->ops->remove(slot->dev);
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+       int i;
+
+       for (i = 0; i < TPCI200_NB_SLOT; i++)
+               tpci200_slot_remove(&tpci200->slots[i]);
+
+       tpci200_unregister(tpci200);
+       kfree(tpci200->slots);
+}
+
+struct ipack_bus_ops tpci200_bus_ops = {
+       .map_space = tpci200_slot_map_space,
+       .unmap_space = tpci200_slot_unmap_space,
+       .request_irq = tpci200_request_irq,
+       .free_irq = tpci200_free_irq,
+       .read8 = tpci200_read8,
+       .read16 = tpci200_read16,
+       .read32 = tpci200_read32,
+       .write8 = tpci200_write8,
+       .write16 = tpci200_write16,
+       .write32 = tpci200_write32,
+       .remove_device = tpci200_slot_unregister,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+       int res;
+
+       tpci200->slots = kzalloc(
+               TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+       if (tpci200->slots == NULL) {
+               res = -ENOMEM;
+               goto out_err;
+       }
+
+       res = tpci200_register(tpci200);
+       if (res)
+               goto out_free;
+
+       mutex_init(&tpci200->mutex);
+       return 0;
+
+out_free:
+       kfree(tpci200->slots);
+       tpci200->slots = NULL;
+out_err:
+       return res;
+}
+
+static int tpci200_pciprobe(struct pci_dev *pdev,
+                           const struct pci_device_id *id)
+{
+       int ret;
+       struct tpci200_board *tpci200;
+
+       tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+       if (!tpci200)
+               return -ENOMEM;
+
+       tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+       if (!tpci200->info) {
+               kfree(tpci200);
+               return -ENOMEM;
+       }
+
+       /* Save struct pci_dev pointer */
+       tpci200->info->pdev = pdev;
+       tpci200->info->id_table = (struct pci_device_id *)id;
+
+       /* register the device and initialize it */
+       ret = tpci200_install(tpci200);
+       if (ret) {
+               pr_err("Error during tpci200 install !\n");
+               kfree(tpci200->info);
+               kfree(tpci200);
+               return -ENODEV;
+       }
+
+       tpci200->info->drv.dev = &pdev->dev;
+       tpci200->info->drv.slots = TPCI200_NB_SLOT;
+
+       /* Register the bus in the industry pack driver */
+       ret = ipack_bus_register(&tpci200->info->drv);
+       if (ret < 0) {
+               pr_err("error registering the carrier on ipack driver\n");
+               tpci200_uninstall(tpci200);
+               kfree(tpci200->info);
+               kfree(tpci200);
+               return -EFAULT;
+       }
+       /* save the bus number given by ipack to logging purpose */
+       tpci200->number = tpci200->info->drv.bus_nr;
+       dev_set_drvdata(&pdev->dev, tpci200);
+       /* add the registered device in an internal linked list */
+       list_add_tail(&tpci200->list, &tpci200_list);
+       return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+       tpci200_uninstall(tpci200);
+       tpci200_remove_sysfs_files(tpci200);
+       list_del(&tpci200->list);
+       ipack_bus_unregister(&tpci200->info->drv);
+       kfree(tpci200);
+}
+
+static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+{
+       struct tpci200_board *tpci200, *next;
+
+       /* Search the registered device to uninstall it */
+       list_for_each_entry_safe(tpci200, next, &tpci200_list, list) {
+               if (tpci200->info->pdev == dev) {
+                       __tpci200_pci_remove(tpci200);
+                       break;
+               }
+       }
+}
+
+static struct pci_device_id tpci200_idtable[2] = {
+       { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+         TPCI200_SUBDEVICE_ID },
+       { 0, },
+};
+
+static struct pci_driver tpci200_pci_drv = {
+       .name = "tpci200",
+       .id_table = tpci200_idtable,
+       .probe = tpci200_pciprobe,
+       .remove = __devexit_p(tpci200_pci_remove),
+};
+
+static int __init tpci200_drvr_init_module(void)
+{
+       return pci_register_driver(&tpci200_pci_drv);
+}
+
+static void __exit tpci200_drvr_exit_module(void)
+{
+       struct tpci200_board *tpci200, *next;
+
+       list_for_each_entry_safe(tpci200, next, &tpci200_list, list)
+               __tpci200_pci_remove(tpci200);
+
+       pci_unregister_driver(&tpci200_pci_drv);
+}
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
+module_init(tpci200_drvr_init_module);
+module_exit(tpci200_drvr_exit_module);
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h
new file mode 100644 (file)
index 0000000..e452da2
--- /dev/null
@@ -0,0 +1,165 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_SHORTNAME "TPCI200"
+
+#define TPCI200_NB_SLOT               0x4
+#define TPCI200_NB_BAR                0x6
+
+#define TPCI200_VENDOR_ID             0x1498
+#define TPCI200_DEVICE_ID             0x30C8
+#define TPCI200_SUBVENDOR_ID          0x1498
+#define TPCI200_SUBDEVICE_ID          0x300A
+
+#define TPCI200_IP_INTERFACE_BAR      2
+#define TPCI200_IO_ID_INT_SPACES_BAR  3
+#define TPCI200_MEM16_SPACE_BAR       4
+#define TPCI200_MEM8_SPACE_BAR        5
+
+#define TPCI200_REVISION_REG          0x00
+#define TPCI200_CONTROL_A_REG         0x02
+#define TPCI200_CONTROL_B_REG         0x04
+#define TPCI200_CONTROL_C_REG         0x06
+#define TPCI200_CONTROL_D_REG         0x08
+#define TPCI200_RESET_REG             0x0A
+#define TPCI200_STATUS_REG            0x0C
+
+#define TPCI200_IFACE_SIZE            0x100
+
+#define TPCI200_IO_SPACE_OFF          0x0000
+#define TPCI200_IO_SPACE_GAP          0x0100
+#define TPCI200_IO_SPACE_SIZE         0x0080
+#define TPCI200_ID_SPACE_OFF          0x0080
+#define TPCI200_ID_SPACE_GAP          0x0100
+#define TPCI200_ID_SPACE_SIZE         0x0040
+#define TPCI200_INT_SPACE_OFF         0x00C0
+#define TPCI200_INT_SPACE_GAP         0x0100
+#define TPCI200_INT_SPACE_SIZE        0x0040
+#define TPCI200_IOIDINT_SIZE          0x0400
+
+#define TPCI200_MEM8_GAP              0x00400000
+#define TPCI200_MEM8_SIZE             0x00400000
+#define TPCI200_MEM16_GAP             0x00800000
+#define TPCI200_MEM16_SIZE            0x00800000
+
+#define TPCI200_INT0_EN               0x0040
+#define TPCI200_INT1_EN               0x0080
+#define TPCI200_INT0_EDGE             0x0010
+#define TPCI200_INT1_EDGE             0x0020
+#define TPCI200_ERR_INT_EN            0x0008
+#define TPCI200_TIME_INT_EN           0x0004
+#define TPCI200_RECOVER_EN            0x0002
+#define TPCI200_CLK32                 0x0001
+
+#define TPCI200_A_RESET               0x0001
+#define TPCI200_B_RESET               0x0002
+#define TPCI200_C_RESET               0x0004
+#define TPCI200_D_RESET               0x0008
+
+#define TPCI200_A_TIMEOUT             0x1000
+#define TPCI200_B_TIMEOUT             0x2000
+#define TPCI200_C_TIMEOUT             0x4000
+#define TPCI200_D_TIMEOUT             0x8000
+
+#define TPCI200_A_ERROR               0x0100
+#define TPCI200_B_ERROR               0x0200
+#define TPCI200_C_ERROR               0x0400
+#define TPCI200_D_ERROR               0x0800
+
+#define TPCI200_A_INT0                0x0001
+#define TPCI200_A_INT1                0x0002
+#define TPCI200_B_INT0                0x0004
+#define TPCI200_B_INT1                0x0008
+#define TPCI200_C_INT0                0x0010
+#define TPCI200_C_INT1                0x0020
+#define TPCI200_D_INT0                0x0040
+#define TPCI200_D_INT1                0x0080
+
+#define TPCI200_SLOT_INT_MASK         0x00FF
+
+#define VME_IOID_SPACE  "IOID"
+#define VME_MEM_SPACE  "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector     Vector number
+ * @handler    Handler called when IRQ arrives
+ * @arg                Handler argument
+ * @name       IRQ name
+ *
+ */
+struct slot_irq {
+       int          vector;
+       int         (*handler)(void *);
+       void         *arg;
+       char         name[IPACK_IRQ_NAME_SIZE];
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id    Slot identification gived to external interface
+ * @irq                Slot IRQ infos
+ * @io_phys    IO physical base address register of the slot
+ * @id_phys    ID physical base address register of the slot
+ * @mem_phys   MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+       struct ipack_device     *dev;
+       struct slot_irq         *irq;
+       struct ipack_addr_space io_phys;
+       struct ipack_addr_space id_phys;
+       struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev            PCI device
+ * @interface_regs     Pointer to IP interface space (Bar 2)
+ * @ioidint_space      Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space         Pointer to MEM space (Bar 4)
+ * @access_lock                Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+       struct pci_dev                  *pdev;
+       struct pci_device_id            *id_table;
+       void                            *interface_regs;
+       void                            *ioidint_space;
+       void                            *mem8_space;
+       spinlock_t                      access_lock;
+       struct ipack_bus_device         drv;
+};
+struct tpci200_board {
+       struct list_head        list;
+       unsigned int            number;
+       struct mutex            mutex;
+       struct tpci200_slot     *slots;
+       struct tpci200_infos    *info;
+};
+
+#endif /* _TPCI200_H_ */