{
struct dst_state *state = fe->demodulator_priv;
+#ifdef CONFIG_DVB_CORE_ATTACH
if (state->dst_hw_cap & DST_TYPE_HAS_CA)
symbol_put(dst_ca_attach);
+#endif
kfree(state);
}
in-kernel drivers will select this automatically if needed.
If unsure say N.
+config DVB_CORE_ATTACH
+ bool "Load and attach frontend modules as needed"
+ depends on DVB_CORE
+ depends on MODULES
+ help
+ Remove the static dependency of DVB card drivers on all
+ frontend modules for all possible card variants. Instead,
+ allow the card drivers to only load the frontend modules
+ they require. This saves several KBytes of memory.
+
+ If unsure say Y.
config DVB_USB_CXUSB
tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
- select DVB_CX22702
- select DVB_LGDT330X
- select DVB_MT352
- select DVB_ZL10353
+ select DVB_CX22702 if !DVB_FE_CUSTOMISE
+ select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
- select DVB_NXT6000
- select DVB_MT352
+ select DVB_NXT6000 if !DVB_FE_CUSTOMISE
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
help
Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
+#if defined(CONFIG_DVB_BCM3510) || defined(CONFIG_DVB_BCM3510_MODULE)
extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_BCM3510
#endif
u8 demod_address;
};
+#if defined(CONFIG_DVB_CX22700) || defined(CONFIG_DVB_CX22700_MODULE)
extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_CX22700
#endif // CX22700_H
u8 output_mode;
};
+#if defined(CONFIG_DVB_CX22702) || defined(CONFIG_DVB_CX22702_MODULE)
extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_CX22702
#endif // CX22702_H
u8 demod_address;
};
-extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
- struct i2c_adapter* i2c);
-
static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) {
int r = 0;
u8 buf[] = {(u8) (val>>24), (u8) (val>>16), (u8) (val>>8)};
return r;
}
+#if defined(CONFIG_DVB_CX24110) || defined(CONFIG_DVB_CX24110_MODULE)
+extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
+ struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_CX24110
+
#endif // CX24110_H
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
+#if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE)
extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_CX24123
#endif /* CX24123_H */
int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
};
+#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE)
extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
+#else
+static inline struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
+ struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_DIB3000MB
+#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE)
extern struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
+#else
+static inline struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
+ struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_DIB3000MC
+
#endif // DIB3000_H
#define ISL6421_ISEL1 0x20
#define ISL6421_DCL 0x40
+#if defined(CONFIG_DVB_ISL6421) || defined(CONFIG_DVB_ISL6421_MODULE)
/* override_set and override_clear control which system register bits (above) to always set & clear */
extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
u8 override_set, u8 override_clear);
+#else
+static inline struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
+ u8 override_set, u8 override_clear)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_ISL6421
#endif
u8 demod_address;
};
-
+#if defined(CONFIG_DVB_L64781) || defined(CONFIG_DVB_L64781_MODULE)
extern struct dvb_frontend* l64781_attach(const struct l64781_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* l64781_attach(const struct l64781_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_L64781
#endif // L64781_H
int clock_polarity_flip;
};
+#if defined(CONFIG_DVB_LGDT330X) || defined(CONFIG_DVB_LGDT330X_MODULE)
extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_LGDT330X
#endif /* LGDT330X_H */
#include <linux/dvb/frontend.h>
+#if defined(CONFIG_DVB_LNBP21) || defined(CONFIG_DVB_LNBP21_MODULE)
/* override_set and override_clear control which system register bits (above) to always set & clear */
extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear);
+#else
+static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_LNBP21
-#endif
+#endif // _LNBP21_H
u8 demod_address;
};
+#if defined(CONFIG_DVB_MT312) || defined(CONFIG_DVB_MT312_MODULE)
struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
struct i2c_adapter* i2c);
-
+#else
+static inline struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_MT312
#endif // MT312_H
int (*demod_init)(struct dvb_frontend* fe);
};
+#if defined(CONFIG_DVB_MT352) || defined(CONFIG_DVB_MT352_MODULE)
extern struct dvb_frontend* mt352_attach(const struct mt352_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* mt352_attach(const struct mt352_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_MT352
static inline int mt352_write(struct dvb_frontend *fe, u8 *buf, int len) {
int r = 0;
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
+#if defined(CONFIG_DVB_NXT200X) || defined(CONFIG_DVB_NXT200X_MODULE)
extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_NXT200X
#endif /* NXT200X_H */
u8 clock_inversion:1;
};
+#if defined(CONFIG_DVB_NXT6000) || defined(CONFIG_DVB_NXT6000_MODULE)
extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_NXT6000
#endif // NXT6000_H
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
+#if defined(CONFIG_DVB_OR51132) || defined(CONFIG_DVB_OR51132_MODULE)
extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* or51132_attach(const struct or51132_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_OR51132
#endif // OR51132_H
void (*sleep)(struct dvb_frontend * fe);
};
+#if defined(CONFIG_DVB_OR51211) || defined(CONFIG_DVB_OR51211_MODULE)
extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* or51211_attach(const struct or51211_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_OR51211
#endif // OR51211_H
u8 invert:1;
};
+#if defined(CONFIG_DVB_S5H1420) || defined(CONFIG_DVB_S5H1420_MODULE)
extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_S5H1420
#endif // S5H1420_H
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
+#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE)
extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_SP8870
#endif // SP8870_H
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
+#if defined(CONFIG_DVB_SP887X) || defined(CONFIG_DVB_SP887X_MODULE)
extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_SP887X
#endif // SP887X_H
u8 stop_during_read:1;
};
+#if defined(CONFIG_DVB_STV0297) || defined(CONFIG_DVB_STV0297_MODULE)
extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_STV0297
#endif // STV0297_H
int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio);
};
+#if defined(CONFIG_DVB_STV0299) || defined(CONFIG_DVB_STV0299_MODULE)
extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_STV0299
static inline int stv0299_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
int r = 0;
u8 demod_address;
};
+#if defined(CONFIG_DVB_TDA10021) || defined(CONFIG_DVB_TDA10021_MODULE)
extern struct dvb_frontend* tda10021_attach(const struct tda10021_config* config,
struct i2c_adapter* i2c, u8 pwm);
+#else
+static inline struct dvb_frontend* tda10021_attach(const struct tda10021_config* config,
+ struct i2c_adapter* i2c, u8 pwm)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TDA10021
static inline int tda10021_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
int r = 0;
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
+#if defined(CONFIG_DVB_TDA1004X) || defined(CONFIG_DVB_TDA1004X_MODULE)
extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c);
extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TDA1004X
static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
int r = 0;
u8 demod_address;
};
+#if defined(CONFIG_DVB_TDA8083) || defined(CONFIG_DVB_TDA8083_MODULE)
extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_TDA8083
#endif // TDA8083_H
u8 selagc:1;
};
+#if defined(CONFIG_DVB_VES1820) || defined(CONFIG_DVB_VES1820_MODULE)
extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
struct i2c_adapter* i2c, u8 pwm);
+#else
+static inline struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
+ struct i2c_adapter* i2c, u8 pwm)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_VES1820
#endif // VES1820_H
u8 invert_pwm:1;
};
+#if defined(CONFIG_DVB_VES1X93) || defined(CONFIG_DVB_VES1X93_MODULE)
extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
struct i2c_adapter* i2c);
+#else
+static inline struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
+ struct i2c_adapter* i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_VES1X93
#endif // VES1X93_H
int no_tuner;
};
+#if defined(CONFIG_DVB_ZL10353) || defined(CONFIG_DVB_ZL10353_MODULE)
extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+ return NULL;
+}
+#endif // CONFIG_DVB_ZL10353
#endif /* ZL10353_H */
-config VIDEO_CX88_VP3054
- tristate
- depends on VIDEO_CX88_DVB && DVB_MT352
-
config VIDEO_CX88
tristate "Conexant 2388x (bt878 successor) support"
depends on VIDEO_DEV && PCI && I2C
depends on VIDEO_CX88 && DVB_CORE
select VIDEO_BUF_DVB
select DVB_PLL
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_OR51132 if !DVB_FE_CUSTOMISE
+ select DVB_CX22702 if !DVB_FE_CUSTOMISE
+ select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_NXT200X if !DVB_FE_CUSTOMISE
+ select DVB_CX24123 if !DVB_FE_CUSTOMISE
+ select DVB_ISL6421 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
To compile this driver as a module, choose M here: the
module will be called cx88-dvb.
- You must also select one or more DVB/ATSC demodulators.
- If you are unsure which you need, choose all of them.
-
-config VIDEO_CX88_DVB_ALL_FRONTENDS
- bool "Build all supported frontends for cx2388x based TV cards"
- default y
- depends on VIDEO_CX88_DVB
- select DVB_MT352
- select VIDEO_CX88_VP3054
- select DVB_ZL10353
- select DVB_OR51132
- select DVB_CX22702
- select DVB_LGDT330X
- select DVB_NXT200X
- select DVB_CX24123
- select DVB_ISL6421
- ---help---
- This builds cx88-dvb with all currently supported frontend
- demodulators. If you wish to tweak your configuration, and
- only include support for the hardware that you need, choose N here.
-
- If you are unsure, choose Y.
-
-config VIDEO_CX88_DVB_MT352
- bool "Zarlink MT352 DVB-T Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_MT352
- ---help---
- This adds DVB-T support for cards based on the
- Connexant 2388x chip and the MT352 demodulator.
-
-config VIDEO_CX88_DVB_VP3054
- bool "VP-3054 Secondary I2C Bus Support"
- default y
- depends on VIDEO_CX88_DVB_MT352
- select VIDEO_CX88_VP3054
+config VIDEO_CX88_VP3054
+ tristate "VP-3054 Secondary I2C Bus Support"
+ default m
+ depends on VIDEO_CX88_DVB && DVB_MT352
---help---
This adds DVB-T support for cards based on the
Connexant 2388x chip and the MT352 demodulator,
which also require support for the VP-3054
Secondary I2C bus, such at DNTV Live! DVB-T Pro.
-
-config VIDEO_CX88_DVB_ZL10353
- bool "Zarlink ZL10353 DVB-T Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_ZL10353
- ---help---
- This adds DVB-T support for cards based on the
- Connexant 2388x chip and the ZL10353 demodulator,
- successor to the Zarlink MT352.
-
-config VIDEO_CX88_DVB_OR51132
- bool "OR51132 ATSC Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_OR51132
- ---help---
- This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the OR51132 demodulator.
-
-config VIDEO_CX88_DVB_CX22702
- bool "Conexant CX22702 DVB-T Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_CX22702
- ---help---
- This adds DVB-T support for cards based on the
- Connexant 2388x chip and the CX22702 demodulator.
-
-config VIDEO_CX88_DVB_LGDT330X
- bool "LG Electronics DT3302/DT3303 ATSC Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_LGDT330X
- ---help---
- This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
-
-config VIDEO_CX88_DVB_NXT200X
- bool "NXT2002/NXT2004 ATSC Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_NXT200X
- ---help---
- This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the NXT2002/NXT2004 demodulator.
-
-config VIDEO_CX88_DVB_CX24123
- bool "Conexant CX24123 DVB-S Support"
- default y
- depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS
- select DVB_CX24123
- select DVB_ISL6421
- ---help---
- This adds DVB-S support for cards based on the
- Connexant 2388x chip and the CX24123 demodulator.
select VIDEO_BUF_DVB
select FW_LOADER
select DVB_PLL
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+ select DVB_NXT200X if !DVB_FE_CUSTOMISE
+ select DVB_TDA10086 if !DVB_FE_CUSTOMISE
+ select DVB_TDA826X if !DVB_FE_CUSTOMISE
+ select DVB_ISL6421 if !DVB_FE_CUSTOMISE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
To compile this driver as a module, choose M here: the
module will be called saa7134-dvb.
-
- You must also select one or more DVB demodulators.
- If you are unsure which you need, choose all of them.
-
-config VIDEO_SAA7134_DVB_ALL_FRONTENDS
- bool "Build all supported frontends for saa7134 based TV cards"
- default y
- depends on VIDEO_SAA7134_DVB
- select DVB_MT352
- select DVB_TDA1004X
- select DVB_NXT200X
- ---help---
- This builds saa7134-dvb with all currently supported frontend
- demodulators. If you wish to tweak your configuration, and
- only include support for the hardware that you need, choose N here.
-
- If you are unsure, choose Y.
-
-config VIDEO_SAA7134_DVB_MT352
- bool "Zarlink MT352 DVB-T Support"
- default y
- depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
- select DVB_MT352
- ---help---
- This adds DVB-T support for cards based on the
- Philips saa7134 chip and the MT352 demodulator.
-
-config VIDEO_SAA7134_DVB_TDA1004X
- bool "Phillips TDA10045H/TDA10046H DVB-T Support"
- default y
- depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
- select DVB_TDA1004X
- ---help---
- This adds DVB-T support for cards based on the
- Philips saa7134 chip and the TDA10045H/TDA10046H demodulator.
-
-config VIDEO_SAA7134_DVB_NXT200X
- bool "NXT2002/NXT2004 ATSC Support"
- default y
- depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS
- select DVB_NXT200X
- ---help---
- This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Philips saa7134 chip and the NXT2002/NXT2004 demodulator.
projects / linux-beck.git / commitdiff