----------------------------
-What: i2c_adapter.id
-When: June 2011
-Why: This field is deprecated. I2C device drivers shouldn't change their
- behavior based on the underlying I2C adapter. Instead, the I2C
- adapter driver should instantiate the I2C devices and provide the
- needed platform-specific information.
-Who: Jean Delvare <khali@linux-fr.org>
-
-----------------------------
-
What: cancel_rearming_delayed_work[queue]()
When: 2.6.39
Files: include/linux/netfilter_ipv4/ipt_addrtype.h
----------------------------
+
+What: i2c_driver.attach_adapter
+ i2c_driver.detach_adapter
+When: September 2011
+Why: These legacy callbacks should no longer be used as i2c-core offers
+ a variety of preferable alternative ways to instantiate I2C devices.
+Who: Jean Delvare <khali@linux-fr.org>
+
+----------------------------
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
* Intel 5/3400 Series (PCH)
- * Intel Cougar Point (PCH)
+ * Intel 6 Series (PCH)
* Intel Patsburg (PCH)
+ * Intel DH89xxCC (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
(...)
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
- strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
+ strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
return 0;
}
-static int __devexit example_detach(struct i2c_client *client)
+static int example_detach(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
.name = "example",
},
.attach_adapter = example_attach_adapter,
- .detach_client = __devexit_p(example_detach),
+ .detach_client = example_detach,
.suspend = example_suspend,
.resume = example_resume,
};
The new style binding model will check against a list of supported
devices and their associated address supplied by the code registering
the busses. This means that the driver .attach_adapter and
-.detach_adapter methods can be removed, along with the addr_data,
+.detach_client methods can be removed, along with the addr_data,
as follows:
- static struct i2c_driver example_driver;
static struct i2c_driver example_driver = {
- .attach_adapter = example_attach_adapter,
-- .detach_client = __devexit_p(example_detach),
+- .detach_client = example_detach,
}
Add the probe and remove methods to the i2c_driver, as so:
static struct i2c_driver example_driver = {
+ .probe = example_probe,
-+ .remove = __devexit_p(example_remove),
++ .remove = example_remove,
}
Change the example_attach method to accept the new parameters
can also remove the ret variable as it is not not needed for
any of the core functions.
-- static int __devexit example_detach(struct i2c_client *client)
-+ static int __devexit example_remove(struct i2c_client *client)
+- static int example_detach(struct i2c_client *client)
++ static int example_remove(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
return 0;
}
-static int __devexit example_remove(struct i2c_client *client)
+static int example_remove(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
},
.id_table = example_idtable,
.probe = example_probe,
- .remove = __devexit_p(example_remove),
+ .remove = example_remove,
.suspend = example_suspend,
.resume = example_resume,
};
Note: No module for the mse3000 is available yet
Note: No module for the vpx3224 is available yet
-Note: use encoder=X or decoder=X for non-default i2c chips (see i2c-id.h)
+Note: use encoder=X or decoder=X for non-default i2c chips
===========================
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
- cscope TAGS tags help %docs check% coccicheck \
+ cscope gtags TAGS tags help %docs check% coccicheck \
include/linux/version.h headers_% \
kernelversion %src-pkg
MRPROPER_DIRS += include/config usr/include include/generated
MRPROPER_FILES += .config .config.old .version .old_version \
include/linux/version.h \
- Module.symvers tags TAGS cscope*
+ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
# clean - Delete most, but leave enough to build external modules
#
@echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
+ @echo ' gtags - Generate GNU GLOBAL index'
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
quiet_cmd_tags = GEN $@
cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
-tags TAGS cscope: FORCE
+tags TAGS cscope gtags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
-EXTRA_CFLAGS := -fpic -fno-builtin
-EXTRA_AFLAGS := -Wa,-march=all
+ccflags-y := -fpic -fno-builtin
+asflags-y := -Wa,-march=all
# Provide size of uncompressed kernel to the decompressor via a linker symbol.
LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
# Copyright (C) 2001 ARM Limited
#
-# EXTRA_CFLAGS := -DDEBUG
-# EXTRA_AFLAGS := -DDEBUG
+# ccflags-y := -DDEBUG
+# asflags-y := -DDEBUG
KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp)
LDFLAGS +=--no-warn-mismatch
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-EXTRA_AFLAGS := -traditional
+asflags-y := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
# Makefile for Kernel-based Virtual Machine module
#
-EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
-EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
+ccflags-y := -Ivirt/kvm -Iarch/ia64/kvm/
+asflags-y := -Ivirt/kvm -Iarch/ia64/kvm/
common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
coalesced_mmio.o irq_comm.o assigned-dev.o)
# Copyright (C) 1999,2001-2006,2008 Silicon Graphics, Inc. All Rights Reserved.
#
-EXTRA_CFLAGS += -Iarch/ia64/sn/include
+ccflags-y := -Iarch/ia64/sn/include
obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
huberror.o io_acpi_init.o io_common.o \
# sn2 specific kernel files
#
-EXTRA_CFLAGS += -Iarch/ia64/sn/include
+ccflags-y := -Iarch/ia64/sn/include
obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \
prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o
#
# Makefile for the sn pci general routines.
-EXTRA_CFLAGS += -Iarch/ia64/sn/include
+ccflags-y := -Iarch/ia64/sn/include
obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/
#
# Makefile for the sn2 io routines.
-EXTRA_CFLAGS += -Iarch/ia64/sn/include
+ccflags-y := -Iarch/ia64/sn/include
obj-y += pcibr_dma.o pcibr_reg.o \
pcibr_ate.o pcibr_provider.o
# Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved.
#
-EXTRA_CFLAGS += -Iarch/ia64/sn/include
+ccflags-y := -Iarch/ia64/sn/include
obj-y += setup.o
obj-$(CONFIG_IA64_GENERIC) += machvec.o
CFLAGS_REMOVE_cache.o = -pg
endif
-EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+ccflags-y := -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
-DCPU_REV=$(CPU_REV)
obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o
archprepare:
ifdef CONFIG_MIPS32_N32
@echo ' Checking missing-syscalls for N32'
- $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=n32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32"
endif
ifdef CONFIG_MIPS32_O32
@echo ' Checking missing-syscalls for O32'
- $(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=32"
+ $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32"
endif
install:
obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
-EXTRA_CFLAGS += -Werror
+ccflags-y := -Werror
lib-$(CONFIG_ARC_CONSOLE) += arc_con.o
lib-$(CONFIG_ARC_PROMLIB) += promlib.o
-EXTRA_CFLAGS += -Werror
+ccflags-y := -Werror
obj-$(CONFIG_PM) += pm.o
-EXTRA_CFLAGS += -Werror -Wall
+ccflags-y := -Werror -Wall
-EXTRA_CFLAGS := -Werror
+ccflags-y := -Werror
obj-$(CONFIG_OPROFILE) += oprofile.o
obj-$(CONFIG_SMP) += smp.o
-EXTRA_CFLAGS += -Werror
+ccflags-y := -Werror
obj-$(CONFIG_USB) += powertv-usb.o
-EXTRA_CFLAGS += -Wall
+ccflags-y := -Wall
asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
-EXTRA_CFLAGS += -Wall -Werror
+ccflags-y := -Wall -Werror
obj-$(CONFIG_PCI) += fixup-powertv.o
-EXTRA_CFLAGS += -Wall -Werror
+ccflags-y := -Wall -Werror
tr -c '[0-9A-Za-z]' '_'`__`date | \
tr -c '[0-9A-Za-z]' '_'`_t
-EXTRA_CFLAGS := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I.
+ccflags-y := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I.
targets := image
targets += bzImage
common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
-EXTRA_CFLAGS += -Ivirt/kvm -Iarch/s390/kvm
+ccflags-y := -Ivirt/kvm -Iarch/s390/kvm
kvm-objs := $(common-objs) kvm-s390.o sie64a.o intercept.o interrupt.o priv.o sigp.o diag.o
obj-$(CONFIG_KVM) += kvm.o
obj-$(CONFIG_MATHEMU) := math.o
-EXTRA_CFLAGS := -I$(src) -Iinclude/math-emu -w
+ccflags-y := -I$(src) -Iinclude/math-emu -w
return __atomic_hashed_lock((int __force *)v);
}
-struct __get_user futex_set(int __user *v, int i)
+struct __get_user futex_set(u32 __user *v, int i)
{
return __atomic_xchg((int __force *)v, __futex_setup(v), i);
}
-struct __get_user futex_add(int __user *v, int n)
+struct __get_user futex_add(u32 __user *v, int n)
{
return __atomic_xchg_add((int __force *)v, __futex_setup(v), n);
}
-struct __get_user futex_or(int __user *v, int n)
+struct __get_user futex_or(u32 __user *v, int n)
{
return __atomic_or((int __force *)v, __futex_setup(v), n);
}
-struct __get_user futex_andn(int __user *v, int n)
+struct __get_user futex_andn(u32 __user *v, int n)
{
return __atomic_andn((int __force *)v, __futex_setup(v), n);
}
-struct __get_user futex_xor(int __user *v, int n)
+struct __get_user futex_xor(u32 __user *v, int n)
{
return __atomic_xor((int __force *)v, __futex_setup(v), n);
}
-struct __get_user futex_cmpxchg(int __user *v, int o, int n)
+struct __get_user futex_cmpxchg(u32 __user *v, int o, int n)
{
return __atomic_cmpxchg((int __force *)v, __futex_setup(v), o, n);
}
OBJS = ptrace.o sigcontext.o checksum.o miscthings.o misc.o \
ptrace_user.o sysrq.o
-EXTRA_AFLAGS := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel
+asflags-y := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel
all: $(OBJ)
$(LD) $(LINKFLAGS) --start-group $^ --end-group -o $@
ptrace_user.o: ptrace_user.c
- $(CC) -D__KERNEL__ $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+ $(CC) -D__KERNEL__ $(USER_CFLAGS) $(ccflags-y) -c -o $@ $<
sigcontext.o: sigcontext.c
- $(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+ $(CC) $(USER_CFLAGS) $(ccflags-y) -c -o $@ $<
checksum.S:
rm -f $@
checksum.o: checksum.S
rm -f asm
ln -s $(srctree)/include/asm-ppc asm
- $(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
+ $(CC) $(asflags-y) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
rm -f asm
misc.o: misc.S ppc_defs.h
rm -f asm
ln -s $(srctree)/include/asm-ppc asm
- $(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
+ $(CC) $(asflags-y) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
rm -f asm
clean-files := $(OBJS) ppc_defs.h checksum.S mk_defs.c
BIG_ENDIAN := $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
-export EXTRA_CFLAGS
+export ccflags-y
export BIG_ENDIAN
subdir-y := lib
lib-y += $(zlib:.c=.o) zmem.o
-EXTRA_CFLAGS += -Ilib/zlib_inflate
+ccflags-y := -Ilib/zlib_inflate
quiet_cmd_copy_zlib = COPY $@
cmd_copy_zlib = cat $< > $@
mwave-y := mwavedd.o smapi.o tp3780i.o 3780i.o
# To have the mwave driver disable other uarts if necessary
-# EXTRA_CFLAGS += -DMWAVE_FUTZ_WITH_OTHER_DEVICES
+# ccflags-y := -DMWAVE_FUTZ_WITH_OTHER_DEVICES
# To compile in lots (~20 KiB) of run-time enablable printk()s for debugging:
-ccflags-y := -DMW_TRACE
+ccflags-y += -DMW_TRACE
0x0008 tp3780i tracing
Tracing only occurs if the driver has been compiled with the
- MW_TRACE macro #defined (i.e. let EXTRA_CFLAGS += -DMW_TRACE
+ MW_TRACE macro #defined (i.e. let ccflags-y := -DMW_TRACE
in the Makefile).
mwave_3780i_irq=5/7/10/11/15
-ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
- ccflags-y += -DDEBUG
-endif
-ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
- ccflags-y += -DVERBOSE_DEBUG
-endif
+ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG
+ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
obj-$(CONFIG_NET_DMA) += iovlock.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
-ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
obj-y += algos/ busses/ muxes/
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
+CFLAGS_i2c-core.o := -Wno-deprecated-declarations
EP80579 (Tolapai)
ICH10
5/3400 Series (PCH)
- Cougar Point (PCH)
+ 6 Series (PCH)
Patsburg (PCH)
+ DH89xxCC (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
- Cougar Point (PCH) 0x1c22 32 hard yes yes yes
+ 6 Series (PCH) 0x1c22 32 hard yes yes yes
Patsburg (PCH) 0x1d22 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
+ DH89xxCC (PCH) 0x2330 32 hard yes yes yes
Features supported by this driver:
Software PEC no
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
{ 0, }
};
/*
- * i2c-boardinfo.h - collect pre-declarations of I2C devices
+ * i2c-boardinfo.c - collect pre-declarations of I2C devices
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/* Let legacy drivers scan this bus for matching devices */
if (driver->attach_adapter) {
+ dev_warn(&adap->dev, "attach_adapter method is deprecated\n");
+ dev_warn(&adap->dev, "Please use another way to instantiate "
+ "your i2c_client\n");
/* We ignore the return code; if it fails, too bad */
driver->attach_adapter(adap);
}
if (!driver->detach_adapter)
return 0;
+ dev_warn(&adapter->dev, "detach_adapter method is deprecated\n");
res = driver->detach_adapter(adapter);
if (res)
dev_err(&adapter->dev, "detach_adapter failed (%d) "
/* ------------------------------------------------------------------------- */
+int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
+{
+ int res;
+
+ mutex_lock(&core_lock);
+ res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
+ mutex_unlock(&core_lock);
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(i2c_for_each_dev);
+
static int __process_new_driver(struct device *dev, void *data)
{
if (dev->type != &i2c_adapter_type)
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
- mutex_lock(&core_lock);
- bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_new_driver);
- mutex_unlock(&core_lock);
+ i2c_for_each_dev(driver, __process_new_driver);
return 0;
}
*/
void i2c_del_driver(struct i2c_driver *driver)
{
- mutex_lock(&core_lock);
- bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_removed_driver);
- mutex_unlock(&core_lock);
+ i2c_for_each_dev(driver, __process_removed_driver);
driver_unregister(&driver->driver);
pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
}
EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-struct i2c_adapter *i2c_get_adapter(int id)
+struct i2c_adapter *i2c_get_adapter(int nr)
{
struct i2c_adapter *adapter;
mutex_lock(&core_lock);
- adapter = idr_find(&i2c_adapter_idr, id);
+ adapter = idr_find(&i2c_adapter_idr, nr);
if (adapter && !try_module_get(adapter->owner))
adapter = NULL;
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/uaccess.h>
-static struct i2c_driver i2cdev_driver;
-
/*
* An i2c_dev represents an i2c_adapter ... an I2C or SMBus master, not a
* slave (i2c_client) with which messages will be exchanged. It's coupled
* with a character special file which is accessed by user mode drivers.
*
* The list of i2c_dev structures is parallel to the i2c_adapter lists
- * maintained by the driver model, and is updated using notifications
- * delivered to the i2cdev_driver.
+ * maintained by the driver model, and is updated using bus notifications.
*/
struct i2c_dev {
struct list_head list;
return -ENOMEM;
}
snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
- client->driver = &i2cdev_driver;
client->adapter = adap;
file->private_data = client;
/* ------------------------------------------------------------------------- */
-/*
- * The legacy "i2cdev_driver" is used primarily to get notifications when
- * I2C adapters are added or removed, so that each one gets an i2c_dev
- * and is thus made available to userspace driver code.
- */
-
static struct class *i2c_dev_class;
-static int i2cdev_attach_adapter(struct i2c_adapter *adap)
+static int i2cdev_attach_adapter(struct device *dev, void *dummy)
{
+ struct i2c_adapter *adap;
struct i2c_dev *i2c_dev;
int res;
+ if (dev->type != &i2c_adapter_type)
+ return 0;
+ adap = to_i2c_adapter(dev);
+
i2c_dev = get_free_i2c_dev(adap);
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
return res;
}
-static int i2cdev_detach_adapter(struct i2c_adapter *adap)
+static int i2cdev_detach_adapter(struct device *dev, void *dummy)
{
+ struct i2c_adapter *adap;
struct i2c_dev *i2c_dev;
+ if (dev->type != &i2c_adapter_type)
+ return 0;
+ adap = to_i2c_adapter(dev);
+
i2c_dev = i2c_dev_get_by_minor(adap->nr);
if (!i2c_dev) /* attach_adapter must have failed */
return 0;
return 0;
}
-static struct i2c_driver i2cdev_driver = {
- .driver = {
- .name = "dev_driver",
- },
- .attach_adapter = i2cdev_attach_adapter,
- .detach_adapter = i2cdev_detach_adapter,
+int i2cdev_notifier_call(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct device *dev = data;
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ return i2cdev_attach_adapter(dev, NULL);
+ case BUS_NOTIFY_DEL_DEVICE:
+ return i2cdev_detach_adapter(dev, NULL);
+ }
+
+ return 0;
+}
+
+static struct notifier_block i2cdev_notifier = {
+ .notifier_call = i2cdev_notifier_call,
};
/* ------------------------------------------------------------------------- */
goto out_unreg_chrdev;
}
- res = i2c_add_driver(&i2cdev_driver);
+ /* Keep track of adapters which will be added or removed later */
+ res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
if (res)
goto out_unreg_class;
+ /* Bind to already existing adapters right away */
+ i2c_for_each_dev(NULL, i2cdev_attach_adapter);
+
return 0;
out_unreg_class:
static void __exit i2c_dev_exit(void)
{
- i2c_del_driver(&i2cdev_driver);
+ bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
+ i2c_for_each_dev(NULL, i2cdev_detach_adapter);
class_destroy(i2c_dev_class);
unregister_chrdev(I2C_MAJOR, "i2c");
}
# link order is important here
#
-EXTRA_CFLAGS += -Idrivers/ide
+ccflags-y := -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
ide-taskfile.o ide-pm.o ide-park.o ide-sysfs.o ide-devsets.o \
obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o
-EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD
+ccflags-y := -DDEBUG -DCONFIG_FFD
# Define maximum number of cards
-EXTRA_CFLAGS += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
+ccflags-y := -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
obj-$(CONFIG_ISDN_DRV_HISAX) += hisax.o
obj-$(CONFIG_HISAX_SEDLBAUER_CS) += sedlbauer_cs.o
# Makefile for the kernel MemoryStick device drivers.
#
-ifeq ($(CONFIG_MEMSTICK_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
+subdir-ccflags-$(CONFIG_MEMSTICK_DEBUG) := -DDEBUG
obj-$(CONFIG_MEMSTICK) += core/
obj-$(CONFIG_MEMSTICK) += host/
# Makefile for the kernel MemoryStick core.
#
-ifeq ($(CONFIG_MEMSTICK_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
-
obj-$(CONFIG_MEMSTICK) += memstick.o
obj-$(CONFIG_MSPRO_BLOCK) += mspro_block.o
# Makefile for MemoryStick host controller drivers
#
-ifeq ($(CONFIG_MEMSTICK_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
-
obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
# enable verbose logging
# CONFIG_FUSION_LOGGING needs to be enabled in Kconfig
-#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE
+#ccflags-y := -DMPT_DEBUG_VERBOSE
#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
-ifeq ($(CONFIG_CB710_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_CB710_DEBUG) := -DDEBUG
obj-$(CONFIG_CB710_CORE) += cb710.o
-ifdef CONFIG_SGI_GRU_DEBUG
- EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_SGI_GRU_DEBUG) := -DDEBUG
obj-$(CONFIG_SGI_GRU) := gru.o
gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o gruhandles.o grukdump.o
-ifeq ($(CONFIG_CAIF_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_CAIF_DEBUG) := -DDEBUG
# Serial interface
obj-$(CONFIG_CAIF_TTY) += caif_serial.o
rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- tp->mii.supports_gmii ?
+ (tp->mii.supports_gmii ?
ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full : 0);
+ ADVERTISED_1000baseT_Full : 0));
if (RTL_R8(PHYstatus) & TBI_Enable)
netif_info(tp, link, dev, "TBI auto-negotiating\n");
# projects. To keep the source common for all those drivers (and
# thus simplify fixes to it), please do not clean it up!
-EXTRA_CFLAGS += -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
+ccflags-y := -Idrivers/net/skfp -DPCI -DMEM_MAPPED_IO -Wno-strict-prototypes
# -DDEBUG \
# -DLMC_PACKET_LOG
-EXTRA_CFLAGS += -I. $(DBGDEF)
+ccflags-y := -I. $(DBGDEF)
/* Following defines can be used to remove unneeded parts of the driver, e.g.,
* to limit the size of the kernel module. Definitions can be added here in
- * hostap_config.h or they can be added to make command with EXTRA_CFLAGS,
+ * hostap_config.h or they can be added to make command with ccflags-y,
* e.g.,
- * 'make pccard EXTRA_CFLAGS="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
+ * 'make pccard ccflags-y="-DPRISM2_NO_DEBUG -DPRISM2_NO_PROCFS_DEBUG"'
*/
/* Do not include debug messages into the driver */
zd_rf_al7230b.o zd_rf_uw2453.o \
zd_rf.o zd_usb.o
-ifeq ($(CONFIG_ZD1211RW_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_ZD1211RW_DEBUG) := -DDEBUG
obj-$(CONFIG_PPS_CLIENT_LDISC) += pps-ldisc.o
obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o
-ifeq ($(CONFIG_PPS_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
obj-$(CONFIG_RAPIDIO) += switches/
-ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
-
-ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
# Makefile for RTC class/drivers.
#
-ifeq ($(CONFIG_RTC_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_RTC_DEBUG) := -DDEBUG
obj-$(CONFIG_RTC_LIB) += rtc-lib.o
obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o
aacraid-objs := linit.o aachba.o commctrl.o comminit.o commsup.o \
dpcsup.o rx.o sa.o rkt.o nark.o
-EXTRA_CFLAGS := -Idrivers/scsi
+ccflags-y := -Idrivers/scsi
# along with the aic94xx driver; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-ifeq ($(CONFIG_AIC94XX_DEBUG),y)
- EXTRA_CFLAGS += -DASD_DEBUG -DASD_ENTER_EXIT
-endif
+ccflags-$(CONFIG_AIC94XX_DEBUG) := -DASD_DEBUG -DASD_ENTER_EXIT
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx.o
aic94xx-y += aic94xx_init.o \
sas_scsi_host.o \
sas_task.o
libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o
-libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
\ No newline at end of file
+libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
# *******************************************************************/
######################################################################
-ifneq ($(GCOV),)
- EXTRA_CFLAGS += -fprofile-arcs -ftest-coverage
- EXTRA_CFLAGS += -O0
-endif
+ccflags-$(GCOV) := -fprofile-arcs -ftest-coverage
+ccflags-$(GCOV) += -O0
obj-$(CONFIG_SCSI_LPFC) := lpfc.o
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA
-ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
- EXTRA_CFLAGS += -DMV_DEBUG
-endif
+ccflags-$(CONFIG_SCSI_MVSAS_DEBUG) := -DMV_DEBUG
obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
mvsas-y += mv_init.o \
-EXTRA_CFLAGS += -Idrivers/scsi
+ccflags-y := -Idrivers/scsi
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o
intelfb-$(CONFIG_FB_INTEL_I2C) += intelfb_i2c.o
intelfb-objs := $(intelfb-y)
-ifdef CONFIG_FB_INTEL_DEBUG
-#EXTRA_CFLAGS += -DDEBUG -DVERBOSE -DREGDUMP
-EXTRA_CFLAGS += -DDEBUG -DREGDUMP
-endif
+ccflags-$(CONFIG_FB_INTEL_DEBUG) := -DDEBUG -DREGDUMP
# Makefile for the Linux affs filesystem routines.
#
-#EXTRA_CFLAGS=-DDEBUG=1
+#ccflags-y := -DDEBUG=1
obj-$(CONFIG_AFFS_FS) += affs.o
# If you want debugging output, please uncomment the following line.
-# EXTRA_CFLAGS += -DDEBUG -DDEBUG_SMB_MALLOC=1
+# ccflags-y := -DDEBUG -DDEBUG_SMB_MALLOC=1
-EXTRA_CFLAGS := -I$(src)
+ccflags-y := -I$(src)
obj-$(CONFIG_GFS2_FS) += gfs2.o
gfs2-y := acl.o bmap.o dir.o xattr.o glock.o \
glops.o inode.o log.o lops.o main.o meta_io.o \
jfs-$(CONFIG_JFS_POSIX_ACL) += acl.o
-EXTRA_CFLAGS += -D_JFS_4K
+ccflags-y := -D_JFS_4K
ncpfs-$(CONFIG_NCPFS_NFS_NS) += symlink.o
# If you want debugging output, please uncomment the following line
-# EXTRA_CFLAGS += -DDEBUG_NCP=1
+# ccflags-y := -DDEBUG_NCP=1
CFLAGS_ncplib_kernel.o := -finline-functions
obj-$(CONFIG_NTFS_FS) += ntfs.o
-ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
- index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
- unistr.o upcase.o
+ntfs-y := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
+ index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
+ unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.30\"
+ntfs-$(CONFIG_NTFS_RW) += bitmap.o lcnalloc.o logfile.o quota.o usnjrnl.o
-ifeq ($(CONFIG_NTFS_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-y := -DNTFS_VERSION=\"2.1.30\"
+ccflags-$(CONFIG_NTFS_DEBUG) += -DDEBUG
+ccflags-$(CONFIG_NTFS_RW) += -DNTFS_RW
-ifeq ($(CONFIG_NTFS_RW),y)
-EXTRA_CFLAGS += -DNTFS_RW
-
-ntfs-objs += bitmap.o lcnalloc.o logfile.o quota.o usnjrnl.o
-endif
-EXTRA_CFLAGS += -Ifs/ocfs2
+ccflags-y := -Ifs/ocfs2
-EXTRA_CFLAGS += -DCATCH_BH_JBD_RACES
+ccflags-y += -DCATCH_BH_JBD_RACES
obj-$(CONFIG_OCFS2_FS) += \
ocfs2.o \
-EXTRA_CFLAGS += -Ifs/ocfs2
+ccflags-y := -Ifs/ocfs2
obj-$(CONFIG_OCFS2_FS_O2CB) += ocfs2_dlm.o
-EXTRA_CFLAGS += -Ifs/ocfs2
+ccflags-y := -Ifs/ocfs2
obj-$(CONFIG_OCFS2_FS) += ocfs2_dlmfs.o
# and causing a panic. Since this behavior only affects ppc32, this ifeq
# will work around it. If any other architecture displays this behavior,
# add it here.
-ifeq ($(CONFIG_PPC32),y)
-EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0400, -O1)
-endif
+ccflags-$(CONFIG_PPC32) := $(call cc-ifversion, -lt, 0400, -O1)
TAGS:
etags *.c
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-EXTRA_CFLAGS += -I$(src) -I$(src)/linux-2.6
+ccflags-y := -I$(src) -I$(src)/linux-2.6
+ccflags-$(CONFIG_XFS_DEBUG) += -g
XFS_LINUX := linux-2.6
-ifeq ($(CONFIG_XFS_DEBUG),y)
- EXTRA_CFLAGS += -g
-endif
-
obj-$(CONFIG_XFS_FS) += xfs.o
xfs-y += linux-2.6/xfs_trace.o
__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
#define __NR_open_by_handle_at 265
__SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
+#define __NR_clock_adjtime 266
+__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
#undef __NR_syscalls
-#define __NR_syscalls 266
+#define __NR_syscalls 267
/*
* All syscalls below here should go away really,
+++ /dev/null
-/* ------------------------------------------------------------------------- */
-/* */
-/* i2c-id.h - identifier values for i2c drivers and adapters */
-/* */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-1999 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-#ifndef LINUX_I2C_ID_H
-#define LINUX_I2C_ID_H
-
-/* Please note that I2C driver IDs are optional. They are only needed if a
- legacy chip driver needs to identify a bus or a bus driver needs to
- identify a legacy client. If you don't need them, just don't set them. */
-
-/*
- * ---- Adapter types ----------------------------------------------------
- */
-
-/* --- Bit algorithm adapters */
-#define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */
-
-#endif /* LINUX_I2C_ID_H */
#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/module.h>
-#include <linux/i2c-id.h>
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
/**
* struct i2c_driver - represent an I2C device driver
* @class: What kind of i2c device we instantiate (for detect)
- * @attach_adapter: Callback for bus addition (for legacy drivers)
- * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @attach_adapter: Callback for bus addition (deprecated)
+ * @detach_adapter: Callback for bus removal (deprecated)
* @probe: Callback for device binding
* @remove: Callback for device unbinding
* @shutdown: Callback for device shutdown
unsigned int class;
/* Notifies the driver that a new bus has appeared or is about to be
- * removed. You should avoid using this if you can, it will probably
- * be removed in a near future.
+ * removed. You should avoid using this, it will be removed in a
+ * near future.
*/
- int (*attach_adapter)(struct i2c_adapter *);
- int (*detach_adapter)(struct i2c_adapter *);
+ int (*attach_adapter)(struct i2c_adapter *) __deprecated;
+ int (*detach_adapter)(struct i2c_adapter *) __deprecated;
/* Standard driver model interfaces */
int (*probe)(struct i2c_client *, const struct i2c_device_id *);
*/
struct i2c_adapter {
struct module *owner;
- unsigned int id __deprecated;
unsigned int class; /* classes to allow probing for */
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
return NULL;
}
+int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *));
+
/* Adapter locking functions, exported for shared pin cases */
void i2c_lock_adapter(struct i2c_adapter *);
void i2c_unlock_adapter(struct i2c_adapter *);
extern void i2c_clients_command(struct i2c_adapter *adap,
unsigned int cmd, void *arg);
-extern struct i2c_adapter *i2c_get_adapter(int id);
+extern struct i2c_adapter *i2c_get_adapter(int nr);
extern void i2c_put_adapter(struct i2c_adapter *adap);
-EXTRA_CFLAGS := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"'
+ccflags-y := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"'
obj-$(CONFIG_GCOV_KERNEL) := base.o fs.o gcc_3_4.o
-ccflags-$(CONFIG_PM_DEBUG) := -DDEBUG
+
+ccflags-$(CONFIG_PM_DEBUG) := -DDEBUG
obj-$(CONFIG_PM) += main.o
obj-$(CONFIG_PM_SLEEP) += console.o
dump_config "$img"
# That didn't work, so retry after decompression.
-try_decompress '\037\213\010' xy gunzip
-try_decompress 'BZh' xy bunzip2
-try_decompress '\135\0\0\0' xxx unlzma
-try_decompress '\211\114\132' xy 'lzop -d'
+try_decompress '\037\213\010' xy gunzip
+try_decompress '\3757zXZ\000' abcde unxz
+try_decompress 'BZh' xy bunzip2
+try_decompress '\135\0\0\0' xxx unlzma
+try_decompress '\211\114\132' xy 'lzop -d'
# Bail out:
echo "$me: Cannot find kernel config." >&2
$(if $(findstring tar-src,$@),, \
$(if $(findstring bz2,$@),bzip2, \
$(if $(findstring gz,$@),gzip, \
-$(error unknown target $@))) \
+$(if $(findstring xz,$@),xz, \
+$(error unknown target $@)))) \
-f -9 $(perf-tar).tar)
perf-%pkg: FORCE
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
+ @echo ' tarxz-pkg - Build the kernel as a xz compressed tarball'
@echo ' perf-tar-src-pkg - Build $(perf-tar).tar source tarball'
@echo ' perf-targz-src-pkg - Build $(perf-tar).tar.gz source tarball'
@echo ' perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
+ @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball'
compress="bzip2 -c9"
file_ext=".bz2"
;;
+ tarxz-pkg)
+ compress="xz -c9"
+ file_ext=".xz"
+ ;;
*)
echo "Unknown tarball target \"${1}\" requested, please add it to ${0}." >&2
exit 1
# Check for mercurial and a mercurial repo.
if test -d .hg && hgid=`hg id 2>/dev/null`; then
- tag=`printf '%s' "$hgid" | cut -s -d' ' -f2`
-
- # Do we have an untagged version?
- if [ -z "$tag" -o "$tag" = tip ]; then
- id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
+ # Do we have an tagged version? If so, latesttagdistance == 1
+ if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then
+ id=`hg log -r . --template '{latesttag}'`
printf '%s%s' -hg "$id"
+ else
+ tag=`printf '%s' "$hgid" | cut -d' ' -f2`
+ if [ -z "$tag" -o "$tag" = tip ]; then
+ id=`printf '%s' "$hgid" | sed 's/[+ ].*//'`
+ printf '%s%s' -hg "$id"
+ fi
fi
# Are there uncommitted changes?
cscope -b -f cscope.out
}
+dogtags()
+{
+ all_sources | gtags -f -
+}
+
exuberant()
{
all_sources | xargs $1 -a \
docscope
;;
+ "gtags")
+ dogtags
+ ;;
+
"tags")
rm -f tags
xtags ctags
projects / karo-tx-linux.git / commitdiff