]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
[MTD] Delete unused header file linux/mtd/iflash.h.
authorRobert P. J. Day <rpjday@mindspring.com>
Fri, 23 Mar 2007 15:27:01 +0000 (11:27 -0400)
committerDavid Woodhouse <dwmw2@infradead.org>
Fri, 23 Mar 2007 15:34:05 +0000 (15:34 +0000)
Delete the unreferenced header file include/linux/mtd/iflash.h.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
include/linux/mtd/iflash.h [deleted file]

diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h
deleted file mode 100644 (file)
index 9aa5b4f..0000000
+++ /dev/null
@@ -1,98 +0,0 @@
-/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */
-
-#ifndef __MTD_IFLASH_H__
-#define __MTD_IFLASH_H__
-
-/* Extended CIS registers for Series 2 and 2+ cards */
-/* The registers are all offsets from 0x4000 */
-#define CISREG_CSR             0x0100
-#define CISREG_WP              0x0104
-#define CISREG_RDYBSY          0x0140
-
-/* Extended CIS registers for Series 2 cards */
-#define CISREG_SLEEP           0x0118
-#define CISREG_RDY_MASK                0x0120
-#define CISREG_RDY_STATUS      0x0130
-
-/* Extended CIS registers for Series 2+ cards */
-#define CISREG_VCR             0x010c
-
-/* Card Status Register */
-#define CSR_SRESET             0x20    /* Soft reset */
-#define CSR_CMWP               0x10    /* Common memory write protect */
-#define CSR_PWRDOWN            0x08    /* Power down status */
-#define CSR_CISWP              0x04    /* Common memory CIS WP */
-#define CSR_WP                 0x02    /* Mechanical write protect */
-#define CSR_READY              0x01    /* Ready/busy status */
-
-/* Write Protection Register */
-#define WP_BLKEN               0x04    /* Enable block locking */
-#define WP_CMWP                        0x02    /* Common memory write protect */
-#define WP_CISWP               0x01    /* Common memory CIS WP */
-
-/* Voltage Control Register */
-#define VCR_VCC_LEVEL          0x80    /* 0 = 5V, 1 = 3.3V */
-#define VCR_VPP_VALID          0x02    /* Vpp Valid */
-#define VCR_VPP_GEN            0x01    /* Integrated Vpp generator */
-
-/* Ready/Busy Mode Register */
-#define RDYBSY_RACK            0x02    /* Ready acknowledge */
-#define RDYBSY_MODE            0x01    /* 1 = high performance */
-
-#define LOW(x) ((x) & 0xff)
-
-/* 28F008SA-Compatible Command Set */
-#define IF_READ_ARRAY          0xffff
-#define IF_INTEL_ID            0x9090
-#define IF_READ_CSR            0x7070
-#define IF_CLEAR_CSR           0x5050
-#define IF_WRITE               0x4040
-#define IF_BLOCK_ERASE         0x2020
-#define IF_ERASE_SUSPEND       0xb0b0
-#define IF_CONFIRM             0xd0d0
-
-/* 28F016SA Performance Enhancement Commands */
-#define IF_READ_PAGE           0x7575
-#define IF_PAGE_SWAP           0x7272
-#define IF_SINGLE_LOAD         0x7474
-#define IF_SEQ_LOAD            0xe0e0
-#define IF_PAGE_WRITE          0x0c0c
-#define IF_RDY_MODE            0x9696
-#define IF_RDY_LEVEL           0x0101
-#define IF_RDY_PULSE_WRITE     0x0202
-#define IF_RDY_PULSE_ERASE     0x0303
-#define IF_RDY_DISABLE         0x0404
-#define IF_LOCK_BLOCK          0x7777
-#define IF_UPLOAD_STATUS       0x9797
-#define IF_READ_ESR            0x7171
-#define IF_ERASE_UNLOCKED      0xa7a7
-#define IF_SLEEP               0xf0f0
-#define IF_ABORT               0x8080
-#define IF_UPLOAD_DEVINFO      0x9999
-
-/* Definitions for Compatible Status Register */
-#define CSR_WR_READY           0x8080  /* Write state machine status */
-#define CSR_ERA_SUSPEND                0x4040  /* Erase suspend status */
-#define CSR_ERA_ERR            0x2020  /* Erase status */
-#define CSR_WR_ERR             0x1010  /* Data write status */
-#define CSR_VPP_LOW            0x0808  /* Vpp status */
-
-/* Definitions for Global Status Register */
-#define GSR_WR_READY           0x8080  /* Write state machine status */
-#define GSR_OP_SUSPEND         0x4040  /* Operation suspend status */
-#define GSR_OP_ERR             0x2020  /* Device operation status */
-#define GSR_SLEEP              0x1010  /* Device sleep status */
-#define GSR_QUEUE_FULL         0x0808  /* Queue status */
-#define GSR_PAGE_AVAIL         0x0404  /* Page buffer available status */
-#define GSR_PAGE_READY         0x0202  /* Page buffer status */
-#define GSR_PAGE_SELECT                0x0101  /* Page buffer select status */
-
-/* Definitions for Block Status Register */
-#define BSR_READY              0x8080  /* Block status */
-#define BSR_UNLOCK             0x4040  /* Block lock status */
-#define BSR_FAILED             0x2020  /* Block operation status */
-#define BSR_ABORTED            0x1010  /* Operation abort status */
-#define BSR_QUEUE_FULL         0x0808  /* Queue status */
-#define BSR_VPP_LOW            0x0404  /* Vpp status */
-
-#endif /* __MTD_IFLASH_H__ */