--- /dev/null
+/*
+ * Ubiquiti Networks XM (rev 1.0) board support
+ *
+ * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ * Derived from: mach-pb44.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_PCI
+#include <linux/ath9k_platform.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+#endif /* CONFIG_PCI */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+
+#define UBNT_XM_GPIO_LED_L1 0
+#define UBNT_XM_GPIO_LED_L2 1
+#define UBNT_XM_GPIO_LED_L3 11
+#define UBNT_XM_GPIO_LED_L4 7
+
+#define UBNT_XM_GPIO_BTN_RESET 12
+
+#define UBNT_XM_KEYS_POLL_INTERVAL 20
+#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+#define UBNT_XM_PCI_IRQ 48
+#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
+
+static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt-xm:red:link1",
+ .gpio = UBNT_XM_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:orange:link2",
+ .gpio = UBNT_XM_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:green:link3",
+ .gpio = UBNT_XM_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+ .name = "ubnt-xm:green:link4",
+ .gpio = UBNT_XM_GPIO_LED_L4,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UBNT_XM_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct spi_board_info ubnt_xm_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
+ }
+};
+
+static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ubnt_xm_eeprom_data;
+
+static struct ath724x_pci_data ubnt_xm_pci_data[] = {
+ {
+ .irq = UBNT_XM_PCI_IRQ,
+ .pdata = &ubnt_xm_eeprom_data,
+ },
+};
+#endif /* CONFIG_PCI */
+
+static void __init ubnt_xm_init(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+ ARRAY_SIZE(ubnt_xm_spi_info));
+
+#ifdef CONFIG_PCI
+ memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+ sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+ ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+#endif /* CONFIG_PCI */
+
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ "UBNT-XM",
+ "Ubiquiti Networks XM (rev 1.0) board",
+ ubnt_xm_init);