]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: kirkwood: ib62x0: add u-boot environment partition
authorLuka Perkov <luka@openwrt.org>
Thu, 3 Oct 2013 03:06:45 +0000 (05:06 +0200)
committerJason Cooper <jason@lakedaemon.net>
Thu, 3 Oct 2013 12:52:47 +0000 (12:52 +0000)
Also, add some trivial whitespace cleanup.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arch/arm/boot/dts/kirkwood-ib62x0.dts

index 066f40f9981629183d00f50bc0ac24a67b674b4e..c5fb02f7ebc3e33107ac067d46a6394d6c21b27d 100644 (file)
@@ -5,7 +5,7 @@
 
 / {
        model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-       compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "marvell,kirkwood-88f6281", "marvell,kirkwood";
+       compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
        memory {
                device_type = "memory";
@@ -43,6 +43,7 @@
                                marvell,function = "gpio";
                        };
                };
+
                serial@12000 {
                        status = "okay";
                };
@@ -71,6 +72,7 @@
                        gpios = <&gpio0 28 1>;
                };
        };
+
        gpio-leds {
                compatible = "gpio-leds";
                pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
                        gpios = <&gpio0 27 0>;
                };
        };
+
        gpio_poweroff {
                compatible = "gpio-poweroff";
                pinctrl-0 = <&pmx_power_off>;
                pinctrl-names = "default";
                gpios = <&gpio0 24 0>;
        };
-
-
 };
 
 &nand {
 
        partition@0 {
                label = "u-boot";
-               reg = <0x0000000 0x100000>;
+               reg = <0x0000000 0xe0000>;
+       };
+
+       partition@e0000 {
+               label = "u-boot environment";
+               reg = <0xe0000 0x100000>;
        };
 
        partition@100000 {
 
 &eth0 {
        status = "okay";
+
        ethernet0-port@0 {
                phy-handle = <&ethphy0>;
        };