phy: rename struct omap_control_usb to struct omap_control_phy

Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 1b607d7cb03d5262aa61f9e6c5119f4200e5095c..fe8c0096f9e43a3667f91799318f9c08f7fd8230 100644 (file)
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -31,12 +31,22 @@ config PHY_MVEBU_SATA
        depends on OF
        select GENERIC_PHY
 
+config OMAP_CONTROL_PHY
+       tristate "OMAP CONTROL PHY Driver"
+       help
+         Enable this to add support for the PHY part present in the control
+         module. This driver has API to power on the USB2 PHY and to write to
+         the mailbox. The mailbox is present only in omap4 and the register to
+         power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+         additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+         (PIPE3 PHY).
+
 config OMAP_USB2
        tristate "OMAP USB2 PHY Driver"
        depends on ARCH_OMAP2PLUS
        depends on USB_PHY
        select GENERIC_PHY
-       select OMAP_CONTROL_USB
+       select OMAP_CONTROL_PHY
        help
          Enable this to support the transceiver that is part of SOC. This
          driver takes care of all the PHY functionality apart from comparator.
@@ -47,7 +57,7 @@ config TI_PIPE3
        tristate "TI PIPE3 PHY Driver"
        depends on ARCH_OMAP2PLUS || COMPILE_TEST
        select GENERIC_PHY
-       select OMAP_CONTROL_USB
+       select OMAP_CONTROL_PHY
        help
          Enable this to support the PIPE3 PHY that is part of TI SOCs. This
          driver takes care of all the PHY functionality apart from comparator.

diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ecf0d3f5bf1d2bea17c950e65ae9daeb67a685fc..8da05a84111206ce9e747df17ee9e5e6bac32a76 100644 (file)
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY)         += phy-bcm-kona-usb2.o
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)      += phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)    += phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_MVEBU_SATA)           += phy-mvebu-sata.o
+obj-$(CONFIG_OMAP_CONTROL_PHY)         += phy-omap-control.o
 obj-$(CONFIG_OMAP_USB2)                        += phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)                 += phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)              += phy-twl4030-usb.o

diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
similarity index 55%
rename from drivers/usb/phy/phy-omap-control.c
rename to drivers/phy/phy-omap-control.c
index e7253182e47d72882b27a2126ba5a0b34183cdee..17fc200210c8449d696e048ff0a22152f7133a93 100644 (file)
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -1,5 +1,5 @@
 /*
- * omap-control-usb.c - The USB part of control module.
+ * omap-control-phy.c - The PHY part of control module.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
  * This program is free software; you can redistribute it and/or modify
@@ -24,36 +24,36 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 
 /**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
+ * omap_control_phy_power - power on/off the phy using control module reg
  * @dev: the control module device
  * @on: 0 or 1, based on powering on or off the PHY
  */
-void omap_control_usb_phy_power(struct device *dev, int on)
+void omap_control_phy_power(struct device *dev, int on)
 {
        u32 val;
        unsigned long rate;
-       struct omap_control_usb *control_usb;
+       struct omap_control_phy *control_phy;
 
        if (IS_ERR(dev) || !dev) {
                pr_err("%s: invalid device\n", __func__);
                return;
        }
 
-       control_usb = dev_get_drvdata(dev);
-       if (!control_usb) {
-               dev_err(dev, "%s: invalid control usb device\n", __func__);
+       control_phy = dev_get_drvdata(dev);
+       if (!control_phy) {
+               dev_err(dev, "%s: invalid control phy device\n", __func__);
                return;
        }
 
-       if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
+       if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
                return;
 
-       val = readl(control_usb->power);
+       val = readl(control_phy->power);
 
-       switch (control_usb->type) {
+       switch (control_phy->type) {
        case OMAP_CTRL_TYPE_USB2:
                if (on)
                        val &= ~OMAP_CTRL_DEV_PHY_PD;
@@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on)
                break;
 
        case OMAP_CTRL_TYPE_PIPE3:
-               rate = clk_get_rate(control_usb->sys_clk);
+               rate = clk_get_rate(control_phy->sys_clk);
                rate = rate/1000000;
 
                if (on) {
-                       val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
-                                       OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
-                       val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
-                               OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
-                       val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
+                       val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+                               OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+                       val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+                               OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+                       val |= rate <<
+                               OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
                } else {
-                       val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
-                       val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
-                               OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+                       val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+                       val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+                               OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
                }
                break;
 
@@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on)
                break;
        default:
                dev_err(dev, "%s: type %d not recognized\n",
-                                       __func__, control_usb->type);
+                       __func__, control_phy->type);
                break;
        }
 
-       writel(val, control_usb->power);
+       writel(val, control_phy->power);
 }
-EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
+EXPORT_SYMBOL_GPL(omap_control_phy_power);
 
 /**
  * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
- * @ctrl_usb: struct omap_control_usb *
+ * @ctrl_phy: struct omap_control_phy *
  *
  * Writes to the mailbox register to notify the usb core that a usb
  * device has been connected.
  */
-static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb)
+static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
 {
        u32 val;
 
-       val = readl(ctrl_usb->otghs_control);
+       val = readl(ctrl_phy->otghs_control);
        val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
        val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
-       writel(val, ctrl_usb->otghs_control);
+       writel(val, ctrl_phy->otghs_control);
 }
 
 /**
  * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
  * impedance
- * @ctrl_usb: struct omap_control_usb *
+ * @ctrl_phy: struct omap_control_phy *
  *
  * Writes to the mailbox register to notify the usb core that it has been
  * connected to a usb host.
  */
-static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb)
+static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
 {
        u32 val;
 
-       val = readl(ctrl_usb->otghs_control);
+       val = readl(ctrl_phy->otghs_control);
        val &= ~OMAP_CTRL_DEV_SESSEND;
        val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
                OMAP_CTRL_DEV_VBUSVALID;
-       writel(val, ctrl_usb->otghs_control);
+       writel(val, ctrl_phy->otghs_control);
 }
 
 /**
  * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
  * impedance
- * @ctrl_usb: struct omap_control_usb *
+ * @ctrl_phy: struct omap_control_phy *
  *
  * Writes to the mailbox register to notify the usb core it's now in
  * disconnected state.
  */
-static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
+static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
 {
        u32 val;
 
-       val = readl(ctrl_usb->otghs_control);
+       val = readl(ctrl_phy->otghs_control);
        val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
        val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
-       writel(val, ctrl_usb->otghs_control);
+       writel(val, ctrl_phy->otghs_control);
 }
 
 /**
@@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb)
 void omap_control_usb_set_mode(struct device *dev,
        enum omap_control_usb_mode mode)
 {
-       struct omap_control_usb *ctrl_usb;
+       struct omap_control_phy *ctrl_phy;
 
        if (IS_ERR(dev) || !dev)
                return;
 
-       ctrl_usb = dev_get_drvdata(dev);
+       ctrl_phy = dev_get_drvdata(dev);
 
-       if (!ctrl_usb) {
-               dev_err(dev, "Invalid control usb device\n");
+       if (!ctrl_phy) {
+               dev_err(dev, "Invalid control phy device\n");
                return;
        }
 
-       if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
+       if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
                return;
 
        switch (mode) {
        case USB_MODE_HOST:
-               omap_control_usb_host_mode(ctrl_usb);
+               omap_control_usb_host_mode(ctrl_phy);
                break;
        case USB_MODE_DEVICE:
-               omap_control_usb_device_mode(ctrl_usb);
+               omap_control_usb_device_mode(ctrl_phy);
                break;
        case USB_MODE_DISCONNECT:
-               omap_control_usb_set_sessionend(ctrl_usb);
+               omap_control_usb_set_sessionend(ctrl_phy);
                break;
        default:
                dev_vdbg(dev, "invalid omap control usb mode\n");
@@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
 
 #ifdef CONFIG_OF
 
-static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
-static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
-static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
-static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
-static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
+static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
 
-static const struct of_device_id omap_control_usb_id_table[] = {
+static const struct of_device_id omap_control_phy_id_table[] = {
        {
                .compatible = "ti,control-phy-otghs",
                .data = &otghs_data,
@@ -236,84 +237,84 @@ static const struct of_device_id omap_control_usb_id_table[] = {
        },
        {},
 };
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
 #endif
 
 
-static int omap_control_usb_probe(struct platform_device *pdev)
+static int omap_control_phy_probe(struct platform_device *pdev)
 {
        struct resource *res;
        const struct of_device_id *of_id;
-       struct omap_control_usb *control_usb;
+       struct omap_control_phy *control_phy;
 
-       of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
-                                                               &pdev->dev);
+       of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
+                               &pdev->dev);
        if (!of_id)
                return -EINVAL;
 
-       control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
+       control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
                GFP_KERNEL);
-       if (!control_usb) {
-               dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
+       if (!control_phy) {
+               dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
                return -ENOMEM;
        }
 
-       control_usb->dev = &pdev->dev;
-       control_usb->type = *(enum omap_control_usb_type *)of_id->data;
+       control_phy->dev = &pdev->dev;
+       control_phy->type = *(enum omap_control_phy_type *)of_id->data;
 
-       if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
+       if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
                res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
                        "otghs_control");
-               control_usb->otghs_control = devm_ioremap_resource(
+               control_phy->otghs_control = devm_ioremap_resource(
                        &pdev->dev, res);
-               if (IS_ERR(control_usb->otghs_control))
-                       return PTR_ERR(control_usb->otghs_control);
+               if (IS_ERR(control_phy->otghs_control))
+                       return PTR_ERR(control_phy->otghs_control);
        } else {
                res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
                                "power");
-               control_usb->power = devm_ioremap_resource(&pdev->dev, res);
-               if (IS_ERR(control_usb->power)) {
+               control_phy->power = devm_ioremap_resource(&pdev->dev, res);
+               if (IS_ERR(control_phy->power)) {
                        dev_err(&pdev->dev, "Couldn't get power register\n");
-                       return PTR_ERR(control_usb->power);
+                       return PTR_ERR(control_phy->power);
                }
        }
 
-       if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
-               control_usb->sys_clk = devm_clk_get(control_usb->dev,
+       if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
+               control_phy->sys_clk = devm_clk_get(control_phy->dev,
                        "sys_clkin");
-               if (IS_ERR(control_usb->sys_clk)) {
+               if (IS_ERR(control_phy->sys_clk)) {
                        pr_err("%s: unable to get sys_clkin\n", __func__);
                        return -EINVAL;
                }
        }
 
-       dev_set_drvdata(control_usb->dev, control_usb);
+       dev_set_drvdata(control_phy->dev, control_phy);
 
        return 0;
 }
 
-static struct platform_driver omap_control_usb_driver = {
-       .probe          = omap_control_usb_probe,
+static struct platform_driver omap_control_phy_driver = {
+       .probe          = omap_control_phy_probe,
        .driver         = {
-               .name   = "omap-control-usb",
+               .name   = "omap-control-phy",
                .owner  = THIS_MODULE,
-               .of_match_table = of_match_ptr(omap_control_usb_id_table),
+               .of_match_table = of_match_ptr(omap_control_phy_id_table),
        },
 };
 
-static int __init omap_control_usb_init(void)
+static int __init omap_control_phy_init(void)
 {
-       return platform_driver_register(&omap_control_usb_driver);
+       return platform_driver_register(&omap_control_phy_driver);
 }
-subsys_initcall(omap_control_usb_init);
+subsys_initcall(omap_control_phy_init);
 
-static void __exit omap_control_usb_exit(void)
+static void __exit omap_control_phy_exit(void)
 {
-       platform_driver_unregister(&omap_control_usb_driver);
+       platform_driver_unregister(&omap_control_phy_driver);
 }
-module_exit(omap_control_usb_exit);
+module_exit(omap_control_phy_exit);
 
-MODULE_ALIAS("platform: omap_control_usb");
+MODULE_ALIAS("platform: omap_control_phy");
 MODULE_AUTHOR("Texas Instruments Inc.");
-MODULE_DESCRIPTION("OMAP Control Module USB Driver");
+MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
 MODULE_LICENSE("GPL v2");

diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 3cc4aba6e50e3a41b65ddbcca9be46c0b5583c88..a2205a841e5e37266594692f2bb12f35f6321bf0 100644 (file)
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -27,7 +27,7 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/phy/phy.h>
 #include <linux/of_platform.h>
 
@@ -105,7 +105,7 @@ static int omap_usb_power_off(struct phy *x)
 {
        struct omap_usb *phy = phy_get_drvdata(x);
 
-       omap_control_usb_phy_power(phy->control_dev, 0);
+       omap_control_phy_power(phy->control_dev, 0);
 
        return 0;
 }
@@ -114,7 +114,7 @@ static int omap_usb_power_on(struct phy *x)
 {
        struct omap_usb *phy = phy_get_drvdata(x);
 
-       omap_control_usb_phy_power(phy->control_dev, 1);
+       omap_control_phy_power(phy->control_dev, 1);
 
        return 0;
 }
@@ -251,7 +251,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
        }
 
        phy->control_dev = &control_pdev->dev;
-       omap_control_usb_phy_power(phy->control_dev, 0);
+       omap_control_phy_power(phy->control_dev, 0);
 
        otg->set_host           = omap_usb_set_host;
        otg->set_peripheral     = omap_usb_set_peripheral;

diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index c8d16746a5e22000f0e56e5d676b7454d8b328d7..fd029b14cb3ea92d13dacb94e80bf75f756b2c0e 100644 (file)
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
 #define        PLL_STATUS              0x00000004
@@ -134,7 +134,7 @@ static int ti_pipe3_power_off(struct phy *x)
                return -EBUSY;
        }
 
-       omap_control_usb_phy_power(phy->control_dev, 0);
+       omap_control_phy_power(phy->control_dev, 0);
 
        return 0;
 }
@@ -232,7 +232,7 @@ static int ti_pipe3_init(struct phy *x)
        if (ret)
                return ret;
 
-       omap_control_usb_phy_power(phy->control_dev, 1);
+       omap_control_phy_power(phy->control_dev, 1);
 
        return 0;
 }
@@ -304,7 +304,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 
        phy->control_dev = &control_pdev->dev;
 
-       omap_control_usb_phy_power(phy->control_dev, 0);
+       omap_control_phy_power(phy->control_dev, 0);
 
        platform_set_drvdata(pdev, phy);
        pm_runtime_enable(phy->dev);

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 8aa59a2c5eb2485c823244012cc738ce5df7d127..d341c149a2f90c1372201b9a78aff8a89d4f3e6f 100644 (file)
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -37,7 +37,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/usb/musb-omap.h>
-#include <linux/usb/omap_control_usb.h>
+#include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
 #include "musb_core.h"

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c337ba2d066b9f0a2f9c813e1700d90479d862a6..416e0c8cf6ff165b2aec8d8d602852a359ec22ff 100644 (file)
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -75,16 +75,6 @@ config NOP_USB_XCEIV
          built-in with usb ip or which are autonomous and doesn't require any
          phy programming such as ISP1x04 etc.
 
-config OMAP_CONTROL_USB
-       tristate "OMAP CONTROL USB Driver"
-       depends on ARCH_OMAP2PLUS || COMPILE_TEST
-       help
-         Enable this to add support for the USB part present in the control
-         module. This driver has API to power on the USB2 PHY and to write to
-         the mailbox. The mailbox is present only in omap4 and the register to
-         power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-         additional register to power on USB3 PHY.
-
 config AM335X_CONTROL_USB
        tristate
 

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 15f1878388f45c50766154276d11c75d203b25c9..f8fa719a31b9b9b8a86454b11a632992ceda7048 100644 (file)
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ISP1301_OMAP)            += phy-isp1301-omap.o
 obj-$(CONFIG_MV_U3D_PHY)               += phy-mv-u3d-usb.o
 obj-$(CONFIG_NOP_USB_XCEIV)            += phy-generic.o
 obj-$(CONFIG_TAHVO_USB)                        += phy-tahvo.o
-obj-$(CONFIG_OMAP_CONTROL_USB)         += phy-omap-control.o
 obj-$(CONFIG_AM335X_CONTROL_USB)       += phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)           += phy-am335x.o
 obj-$(CONFIG_OMAP_OTG)                 += phy-omap-otg.o

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/phy/omap_control_phy.h
similarity index 68%
rename from include/linux/usb/omap_control_usb.h
rename to include/linux/phy/omap_control_phy.h
index 69ae383ee3cc5af06adf82561f8c0ee25a22f334..5450403c7546d4e9429468a9225cf62e0fa9d7f6 100644 (file)
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/phy/omap_control_phy.h
@@ -1,5 +1,5 @@
 /*
- * omap_control_usb.h - Header file for the USB part of control module.
+ * omap_control_phy.h - Header file for the PHY part of control module.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
  * This program is free software; you can redistribute it and/or modify
@@ -16,10 +16,10 @@
  *
  */
 
-#ifndef __OMAP_CONTROL_USB_H__
-#define __OMAP_CONTROL_USB_H__
+#ifndef __OMAP_CONTROL_PHY_H__
+#define __OMAP_CONTROL_PHY_H__
 
-enum omap_control_usb_type {
+enum omap_control_phy_type {
        OMAP_CTRL_TYPE_OTGHS = 1,       /* Mailbox OTGHS_CONTROL */
        OMAP_CTRL_TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
        OMAP_CTRL_TYPE_PIPE3,   /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
@@ -27,7 +27,7 @@ enum omap_control_usb_type {
        OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
 };
 
-struct omap_control_usb {
+struct omap_control_phy {
        struct device *dev;
 
        u32 __iomem *otghs_control;
@@ -36,7 +36,7 @@ struct omap_control_usb {
 
        struct clk *sys_clk;
 
-       enum omap_control_usb_type type;
+       enum omap_control_phy_type type;
 };
 
 enum omap_control_usb_mode {
@@ -54,14 +54,14 @@ enum omap_control_usb_mode {
 #define        OMAP_CTRL_DEV_SESSEND           BIT(3)
 #define        OMAP_CTRL_DEV_IDDIG             BIT(4)
 
-#define        OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK       0x003FC000
-#define        OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT      0xE
+#define        OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK         0x003FC000
+#define        OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT        0xE
 
-#define        OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK      0xFFC00000
-#define        OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT     0x16
+#define        OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK        0xFFC00000
+#define        OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT       0x16
 
-#define        OMAP_CTRL_USB3_PHY_TX_RX_POWERON        0x3
-#define        OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF       0x0
+#define        OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON       0x3
+#define        OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF      0x0
 
 #define OMAP_CTRL_USB2_PHY_PD          BIT(28)
 
@@ -70,13 +70,13 @@ enum omap_control_usb_mode {
 #define AM437X_CTRL_USB2_OTGVDET_EN    BIT(19)
 #define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
 
-#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb_set_mode(struct device *dev,
-       enum omap_control_usb_mode mode);
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY)
+void omap_control_phy_power(struct device *dev, int on);
+void omap_control_usb_set_mode(struct device *dev,
+                              enum omap_control_usb_mode mode);
 #else
 
-static inline void omap_control_usb_phy_power(struct device *dev, int on)
+static inline void omap_control_phy_power(struct device *dev, int on)
 {
 }
 
@@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev,
 }
 #endif
 
-#endif /* __OMAP_CONTROL_USB_H__ */
+#endif /* __OMAP_CONTROL_PHY_H__ */