at91/boards: use -EINVAL for invalid gpio

this will allow to use gpio_is_valid

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd5e36288c1c5395aedc6eaec91e2138ccf..1cde2d8d4155ad47a5af0a64fabaef74d3812357 100644 (file)
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -70,6 +70,7 @@ static struct at91_eth_data __initdata onearm_eth_data = {
 
 static struct at91_usbh_data __initdata onearm_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata onearm_udc_data = {

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96dffa808b1ebf059227d088ca3b92ec441..a6011ba5895440002da3c7987efd0d1c870c6b6f 100644 (file)
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -75,6 +75,7 @@ static void __init afeb9260_init_early(void)
  */
 static struct at91_usbh_data __initdata afeb9260_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +83,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
  */
 static struct at91_udc_data __initdata afeb9260_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -138,6 +139,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
        .bus_width_16   = 0,
        .parts          = afeb9260_nand_partition,
        .num_parts      = ARRAY_SIZE(afeb9260_nand_partition),
+       .det_pin        = -EINVAL,
 };
 
 
@@ -149,6 +151,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
        .wp_pin         = AT91_PIN_PC4,
        .slot_b         = 1,
        .wire4          = 1,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -169,6 +172,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 static struct at91_cf_data afeb9260_cf_data = {
        .chipselect = 4,
        .irq_pin    = AT91_PIN_PA6,
+       .det_pin        = -EINVAL,
+       .vcc_pin        = -EINVAL,
        .rst_pin    = AT91_PIN_PA7,
        .flags      = AT91_CF_TRUE_IDE,
 };

diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 02ded92de5b78deb8819cdf1f9dbaedad80be9e8..b56b8ff1461217e3b3220147dc927be1fd5b3d2e 100644 (file)
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -62,6 +62,7 @@ static void __init cam60_init_early(void)
  */
 static struct at91_usbh_data __initdata cam60_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 
@@ -135,7 +136,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
 static struct atmel_nand_data __initdata cam60_nand_data = {
        .ale            = 21,
        .cle            = 22,
-       // .det_pin     = ... not there
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA9,
        .enable_pin     = AT91_PIN_PA7,
        .parts          = cam60_nand_partition,

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index da2616f20e10880df8be546577a7727a52884dfc..abadf5d77eb57ffe8ed3a5b7ca2d1fdf183ed085 100644 (file)
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -70,6 +70,7 @@ static void __init cap9adk_init_early(void)
  */
 static struct at91_usbh_data __initdata cap9adk_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -144,9 +145,9 @@ static struct spi_board_info cap9adk_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata cap9adk_mmc_data = {
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -154,6 +155,7 @@ static struct at91_mmc_data __initdata cap9adk_mmc_data = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata cap9adk_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -172,8 +174,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
 static struct atmel_nand_data __initdata cap9adk_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
-//     .rdy_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .rdy_pin        = -EINVAL,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = cap9adk_nand_partitions,
        .num_parts      = ARRAY_SIZE(cap9adk_nand_partitions),
@@ -351,7 +353,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
  * AC97
  */
 static struct ac97c_platform_data cap9adk_ac97_data = {
-//     .reset_pin      = ... not connected
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87fcbd5b8f0ee355bf7b9d7c84822eb95ac9..8b2b48023151e43871be55c1acae92017ff89c9b 100644 (file)
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -64,6 +64,7 @@ static struct at91_eth_data __initdata carmeva_eth_data = {
 
 static struct at91_usbh_data __initdata carmeva_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata carmeva_udc_data = {
@@ -75,8 +76,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //     .det_pin        = AT91_PIN_PB0,
 //     .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
+       // .irq_pin     = -EINVAL,
+       // .vcc_pin     = -EINVAL,
 // };
 
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
@@ -84,6 +85,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PB10,
        .wp_pin         = AT91_PIN_PC14,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {

diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 7dd752e32e2a2bbd4dbe95201bee1514782122b6..d583805371fe318dce62f3e62d28af53b7ffc469 100644 (file)
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -86,6 +86,7 @@ static void __init cpu9krea_init_early(void)
  */
 static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,13 +94,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
  */
 static struct at91_udc_data __initdata cpu9krea_udc_data = {
        .vbus_pin       = AT91_PIN_PC8,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata cpu9krea_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -112,6 +114,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .bus_width_16   = 0,
+       .det_pin        = -EINVAL,
 };
 
 #ifdef CONFIG_MACH_CPU9260
@@ -337,6 +340,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .det_pin        = AT91_PIN_PA29,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static void __init cpu9krea_board_init(void)

diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b08ccde481aeac88978fd83d7ca1a329c1..e1991d6e7e52d7a6b1c43688b2f7fd313655fab1 100644 (file)
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -83,11 +83,13 @@ static void __init cpuat91_init_early(void)
 }
 
 static struct at91_eth_data __initdata cpuat91_eth_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata cpuat91_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata cpuat91_udc_data = {
@@ -98,6 +100,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 static struct at91_mmc_data __initdata cpuat91_mmc_data = {
        .det_pin        = AT91_PIN_PC2,
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c3936665e6457715dedaccb0a8b0be0e0fc5f936..c18cd23dfefb824b619cffc6376f52f43d2e590e 100644 (file)
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -65,11 +65,12 @@ static struct at91_eth_data __initdata csb337_eth_data = {
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb337_udc_data = {
-       // this has no VBUS sensing pin
        .pullup_pin     = AT91_PIN_PA24,
+       .vbus_pin       = -EINVAL,
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,6 +99,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PD6,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info csb337_spi_devices[] = {

diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e2acbbb5b54c3820b0acd34dafc14f23df..d96f18ac2f7bd2aeadac3e82d5d6f44276ce55b5 100644 (file)
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -59,6 +59,7 @@ static struct at91_eth_data __initdata csb637_eth_data = {
 
 static struct at91_usbh_data __initdata csb637_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb637_udc_data = {

diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3dbef01b960caa77ff7495a3096a9308bd..36f2128b06443c02005ba8f4163943a40dc9baa1 100644 (file)
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -67,6 +67,7 @@ static struct at91_eth_data __initdata eb9200_eth_data = {
 
 static struct at91_usbh_data __initdata eb9200_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eb9200_udc_data = {
@@ -75,15 +76,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
 };
 
 static struct at91_cf_data __initdata eb9200_cf_data = {
+       .irq_pin        = -EINVAL,
        .det_pin        = AT91_PIN_PB0,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
 };
 
 static struct at91_mmc_data __initdata eb9200_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {

diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d29212332f195c85ae7e6e7bc7b3e814c2..ba2fe1d4e9cff3fa543faf401bfe62b07c62b82f 100644 (file)
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -71,11 +71,15 @@ static struct at91_eth_data __initdata ecb_at91eth_data = {
 
 static struct at91_usbh_data __initdata ecb_at91usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata ecb_at91mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c722607b978007efe922f4480052d1902019..e203ccc06f06d544397cb755be9e45812d50ec44 100644 (file)
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -54,6 +54,7 @@ static struct at91_eth_data __initdata eco920_eth_data = {
 
 static struct at91_usbh_data __initdata eco920_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eco920_udc_data = {
@@ -64,6 +65,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 static struct at91_mmc_data __initdata eco920_mmc_data = {
        .slot_b         = 0,
        .wire4          = 0,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data eco920_flash_data = {

diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4c3f65d9c59b6732bc403f3e33a1f837c009658b..40d896aa6f240d7988e71d8649b1cf1862670144 100644 (file)
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -52,12 +52,13 @@ static void __init flexibity_init_early(void)
 /* USB Host port */
 static struct at91_usbh_data __initdata flexibity_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /* USB Device port */
 static struct at91_udc_data __initdata flexibity_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /* SPI devices */
@@ -76,6 +77,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC9,
        .wp_pin         = AT91_PIN_PC4,
+       .vcc_pin        = -EINVAL,
 };
 
 /* LEDs */

diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a780cfa35ef815f6298519d69ea22105019..1f2d55bcf5c8498b2302fc96bce8a0753cab1d0c 100644 (file)
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -106,6 +106,7 @@ static void __init foxg20_init_early(void)
  */
 static struct at91_usbh_data __initdata foxg20_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -113,7 +114,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
  */
 static struct at91_udc_data __initdata foxg20_udc_data = {
        .vbus_pin       = AT91_PIN_PC6,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -147,6 +148,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = {
 static struct at91_mmc_data __initdata foxg20_mmc_data = {
        .slot_b         = 1,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949737e69d91e6ca5f23fcfed44ac4325155..7eb8eae781255f07ca348e1694b351eb67fd5dbb 100644 (file)
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -80,6 +80,7 @@ static void __init gsia18s_init_early(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -87,7 +88,7 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata udc_data = {
        .vbus_pin       = AT91_PIN_PA22,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -530,6 +531,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
 static struct at91_cf_data __initdata gsia18s_cf1_data = {
        .irq_pin        = AT91_PIN_PA27,
        .det_pin        = AT91_PIN_PB30,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PB31,
        .chipselect     = 5,
        .flags          = AT91_CF_TRUE_IDE,

diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e636332fc5ccfef18b6e02c09915728b2d..940f006c0699d457e8f573284e87eceb90bd9bdd 100644 (file)
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -68,6 +68,7 @@ static struct at91_eth_data __initdata kafa_eth_data = {
 
 static struct at91_usbh_data __initdata kafa_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kafa_udc_data = {

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351ffad50c15399dba98cb7b8b7fa9116728e..39933efcd1741fa79b8ef46cbea2052685d27914 100644 (file)
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -76,6 +76,7 @@ static struct at91_eth_data __initdata kb9202_eth_data = {
 
 static struct at91_usbh_data __initdata kb9202_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kb9202_udc_data = {
@@ -87,6 +88,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
        .det_pin        = AT91_PIN_PB2,
        .slot_b         = 0,
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -100,7 +103,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
 static struct atmel_nand_data __initdata kb9202_nand_data = {
        .ale            = 22,
        .cle            = 21,
-       // .det_pin     = ... not there
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC29,
        .enable_pin     = AT91_PIN_PC28,
        .parts          = kb9202_nand_partition,

diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index a9b9adc78c1d6284eacdb43e6b3bd02f79a95654..a3bfd9f15408045c43481a2eabb119e2916858c2 100644 (file)
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -79,7 +79,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
  */
 static struct at91_udc_data __initdata neocore926_udc_data = {
        .vbus_pin       = AT91_PIN_PA25,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -149,6 +149,7 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PE18,
        .wp_pin         = AT91_PIN_PE19,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -190,6 +191,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
        .enable_pin             = AT91_PIN_PD15,
        .parts                  = neocore926_nand_partition,
        .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
+       .det_pin                = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata neocore926_nand_smc_config = {

diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 0e3c632d30ebcb15530286621efbb68e2585bec6..2f4692c5d4944c53245663e00c0f1d0e3df01a73 100644 (file)
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -107,6 +107,7 @@ static void __init add_device_pcontrol(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 

diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a1b7c8a8a606241f46d8a0a2ff133a75e7..dbe6f0c1a60716cf11cb74a5c4ef0fd78fd52bb7 100644 (file)
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -67,6 +67,7 @@ static struct at91_eth_data __initdata picotux200_eth_data = {
 
 static struct at91_usbh_data __initdata picotux200_usbh_data = {
        .ports          = 1,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
@@ -74,6 +75,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PA17,
+       .vcc_pin        = -EINVAL,
 };
 
 #define PICOTUX200_FLASH_BASE  AT91_CHIPSELECT_0

diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 89d44c037291f4a2925c7d1ad6da7a092ffeb601..d6e931220014b63d73893453f9f5f1ba35a7b783 100644 (file)
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -77,6 +77,7 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -84,7 +85,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -133,7 +134,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -172,9 +173,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 /*

diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c6e92221f53b2024f95d41a1be80e90afe..fe16c27f7c559e5c427c492f2a15725f2d6f4085 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -72,6 +72,7 @@ static struct at91_eth_data __initdata dk_eth_data = {
 
 static struct at91_usbh_data __initdata dk_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata dk_udc_data = {
@@ -80,16 +81,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
 };
 
 static struct at91_cf_data __initdata dk_cf_data = {
+       .irq_pin        = -EINVAL,
        .det_pin        = AT91_PIN_PB0,
+       .vcc_pin        = -EINVAL,
        .rst_pin        = AT91_PIN_PC5,
-       // .irq_pin     = ... not connected
-       // .vcc_pin     = ... always powered
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -143,7 +147,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
        .cle            = 21,
        .det_pin        = AT91_PIN_PB1,
        .rdy_pin        = AT91_PIN_PC2,
-       // .enable_pin  = ... not there
+       .enable_pin     = -EINVAL,
        .parts          = dk_nand_partition,
        .num_parts      = ARRAY_SIZE(dk_nand_partition),
 };

diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8aee0e0f378583365575d3be4bd9127bfe..96e7f91a7e1ab4b97efb9ff15e580e4584c6bf66 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -72,6 +72,7 @@ static struct at91_eth_data __initdata ek_eth_data = {
 
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata ek_udc_data = {
@@ -85,6 +86,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
        .wp_pin         = AT91_PIN_PA17,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 

diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e0283c57f4674521fa418c7853987b7a45a9d91b..48437cf23e098834b1a03920b197816655a09bf0 100644 (file)
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -72,6 +72,7 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -134,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -176,7 +177,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC8,
        .wp_pin         = AT91_PIN_PC4,
-//     .vcc_pin        = ... not connected
+       .vcc_pin        = -EINVAL,
 };
 
 static void __init ek_board_init(void)

diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 00db0f8e34b6127ae7e697686fe1dde7d8237caa..a7418e2345f4d8ec8a55092dcf1beedc9ce4f9e1 100644 (file)
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -75,6 +75,7 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +83,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -176,7 +177,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -223,9 +224,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 1,
        .wire4          = 1,
-//     .det_pin        = ... not connected
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index a879b3398f38875ef097acdbb431504d6365ba7f..f0baff9d57da25a9e6fc58b5dba5790ff534af98 100644 (file)
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -151,6 +151,7 @@ static void __init ek_add_device_dm9000(void) {}
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 
@@ -159,7 +160,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PB29,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -182,7 +183,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 22,
        .cle            = 21,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC15,
        .enable_pin     = AT91_PIN_PC14,
        .parts          = ek_nand_partition,
@@ -345,6 +346,9 @@ static struct spi_board_info ek_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 7b25ca10d9d559b47afdc5952566593c461d6d66..f6d5d37ad9372769a559d7150e2757b5b3ff672a 100644 (file)
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -81,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PA25,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,7 +151,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PE18,
        .wp_pin         = AT91_PIN_PE19,
-//     .vcc_pin        = ... not connected
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -183,7 +183,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA22,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = ek_nand_partition,
@@ -353,6 +353,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 0579f069d97ba4a6d7807b61ff19631bc0e77716..797e863e6a7209d6a6ed61b824547ddc05782057 100644 (file)
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,7 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,7 +94,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PC5,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -163,6 +164,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
        .cle            = 22,
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
+       .det_pin        = -EINVAL,
        .parts          = ek_nand_partition,
        .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -210,6 +212,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
        .slot[1] = {
                .bus_width      = 4,
                .detect_pin     = AT91_PIN_PC9,
+               .wp_pin         = -EINVAL,
        },
 
 };
@@ -218,6 +221,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
        .slot_b         = 1,    /* Only one slot so use slot B */
        .wire4          = 1,
        .det_pin        = AT91_PIN_PC9,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -227,6 +232,7 @@ static void __init ek_add_device_mmc(void)
        if (ek_have_2mmc()) {
                ek_mmc_data.slot[0].bus_width = 4;
                ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+               ek_mmc_data.slot[0].wp_pin = -1;
        }
        at91_add_device_mci(0, &ek_mmc_data);
 #else

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 3e0d5a91f7826e6ea7dc3a2845984c1a6983e61d..9e47a81d2c5b221aeddb56d8df238118dfea4fe0 100644 (file)
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -100,6 +100,7 @@ static struct mci_platform_data __initdata mci0_data = {
        .slot[0] = {
                .bus_width      = 4,
                .detect_pin     = AT91_PIN_PD10,
+               .wp_pin         = -EINVAL,
        },
 };
 
@@ -143,6 +144,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
        .cle            = 22,
        .rdy_pin        = AT91_PIN_PC8,
        .enable_pin     = AT91_PIN_PC14,
+       .det_pin        = -EINVAL,
        .parts          = ek_nand_partition,
        .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -330,6 +332,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c561edac25b94e7a1682b19d3721fa350573c61b..c1366d0032bf46a7bcafedaac099b1b6f6210b6e 100644 (file)
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 static struct at91_mmc_data __initdata ek_mmc_data = {
        .wire4          = 1,
        .det_pin        = AT91_PIN_PA15,
-//     .wp_pin         = ... not connected
-//     .vcc_pin        = ... not connected
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 
@@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PD17,
        .enable_pin     = AT91_PIN_PB6,
        .parts          = ek_nand_partition,
@@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+       .reset_pin      = -EINVAL,
 };
 
 

diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 645d8336468e7514ab589deb286ee5218d0bccbf..752fd05eae0c57a06905447cf1c2699e14f73a06 100644 (file)
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -57,15 +57,18 @@ static void __init snapper9260_init_early(void)
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata snapper9260_udc_data = {
        .vbus_pin               = SNAPPER9260_IO_EXP_GPIO(5),
        .vbus_active_low        = 1,
        .vbus_polled            = 1,
+       .pullup_pin             = -EINVAL,
 };
 
 static struct at91_eth_data snapper9260_macb_data = {
+       .phy_irq_pin    = -EINVAL,
        .is_rmii        = 1,
 };
 
@@ -104,6 +107,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
        .parts          = snapper9260_nand_partitions,
        .num_parts      = ARRAY_SIZE(snapper9260_nand_partitions),
        .bus_width_16   = 0,
+       .enable_pin     = -EINVAL,
+       .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {

diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index f94ac865da53156a5f0702895079a2dc80edc5d2..4e174bc6f7be3048b2b96ec3cb85223a4aa4aaa1 100644 (file)
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
        .rdy_pin        = AT91_PIN_PC13,
        .enable_pin     = AT91_PIN_PC14,
        .bus_width_16   = 0,
+       .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
@@ -122,12 +123,17 @@ static void __init add_device_nand(void)
 static struct mci_platform_data __initdata mmc_data = {
        .slot[0] = {
                .bus_width      = 4,
+               .detect_pin     = -1;
+               .wp_pin         = -1;
        },
 };
 #else
 static struct at91_mmc_data __initdata mmc_data = {
        .slot_b         = 0,
        .wire4          = 1,
+       .det_pin        = -EINVAL,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -137,6 +143,7 @@ static struct at91_mmc_data __initdata mmc_data = {
  */
 static struct at91_usbh_data __initdata usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 
@@ -145,12 +152,12 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata portuxg20_udc_data = {
        .vbus_pin       = AT91_PIN_PC7,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
        .vbus_pin       = AT91_PIN_PA22,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 

diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 6f893cf4d336a666dc7c897f1b4d298e76180948..e2f3804aa17b1deecac62b49a84540e6dc8a362e 100644 (file)
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -66,6 +66,7 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
        .ports          = 2,
+       .vbus_pin       = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -73,7 +74,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
        .vbus_pin       = AT91_PIN_PB11,
-       .pullup_pin     = 0,            /* pull-up driven by UDC */
+       .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static void __init ek_add_device_udc(void)
@@ -193,7 +194,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
        .ale            = 21,
        .cle            = 22,
-//     .det_pin        = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PA22,
        .enable_pin     = AT91_PIN_PD15,
        .parts          = ek_nand_partition,

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f955162b2eb84ce1346ee2eb090bc0113442..3400a9a919665e249de80be123d496f04d114274 100644 (file)
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -120,6 +120,7 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
  */
 static struct at91_usbh_data __initdata yl9200_usbh_data = {
        .ports                  = 1,    /* PQFP version of AT91RM9200 */
+       .vbus_pin               = {-EINVAL, -EINVAL},
 };
 
 /*
@@ -137,8 +138,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
  */
 static struct at91_mmc_data __initdata yl9200_mmc_data = {
        .det_pin        = AT91_PIN_PB9,
-       // .wp_pin      = ... not connected
        .wire4          = 1,
+       .wp_pin         = -EINVAL,
+       .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -175,7 +177,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 static struct atmel_nand_data __initdata yl9200_nand_data = {
        .ale            = 6,
        .cle            = 7,
-       // .det_pin     = ... not connected
+       .det_pin        = -EINVAL,
        .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
        .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
        .parts          = yl9200_nand_partition,

diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e995bb52ba1d0c81cc55af29b4cf6e97b3a..d64bab7288d77690b10bdd35bf7296a4007e2b00 100644 (file)
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -43,10 +43,10 @@
 
  /* USB Device */
 struct at91_udc_data {
-       u8      vbus_pin;               /* high == host powering us */
+       int     vbus_pin;               /* high == host powering us */
        u8      vbus_active_low;        /* vbus polarity */
        u8      vbus_polled;            /* Use polling, not interrupt */
-       u8      pullup_pin;             /* active == D+ pulled up */
+       int     pullup_pin;             /* active == D+ pulled up */
        u8      pullup_active_low;      /* true == pullup_pin is active low */
 };
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
@@ -56,10 +56,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
 struct at91_cf_data {
-       u8      irq_pin;                /* I/O IRQ */
-       u8      det_pin;                /* Card detect */
-       u8      vcc_pin;                /* power switching */
-       u8      rst_pin;                /* card reset */
+       int     irq_pin;                /* I/O IRQ */
+       int     det_pin;                /* Card detect */
+       int     vcc_pin;                /* power switching */
+       int     rst_pin;                /* card reset */
        u8      chipselect;             /* EBI Chip Select number */
        u8      flags;
 #define AT91_CF_TRUE_IDE       0x01
@@ -70,11 +70,11 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
  /* MMC / SD */
   /* at91_mci platform config */
 struct at91_mmc_data {
-       u8              det_pin;        /* card detect IRQ */
+       int             det_pin;        /* card detect IRQ */
        unsigned        slot_b:1;       /* uses Slot B */
        unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
-       u8              wp_pin;         /* (SD) writeprotect detect */
-       u8              vcc_pin;        /* power switching (high == on) */
+       int             wp_pin;         /* (SD) writeprotect detect */
+       int             vcc_pin;        /* power switching (high == on) */
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
@@ -84,7 +84,7 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d
  /* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
        u32             phy_mask;
-       u8              phy_irq_pin;    /* PHY IRQ */
+       int             phy_irq_pin;    /* PHY IRQ */
        u8              is_rmii;        /* using RMII interface? */
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
@@ -97,10 +97,10 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
  /* USB Host */
 struct at91_usbh_data {
        u8              ports;          /* number of ports on root hub */
-       u8              vbus_pin[2];    /* port power-control pin */
+       int             vbus_pin[2];    /* port power-control pin */
        u8              vbus_pin_inverted;
        u8              overcurrent_supported;
-       u8              overcurrent_pin[2];
+       int             overcurrent_pin[2];
        u8              overcurrent_status[2];
        u8              overcurrent_changed[2];
 };
@@ -110,9 +110,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
-       u8              enable_pin;     /* chip enable */
-       u8              det_pin;        /* card detect */
-       u8              rdy_pin;        /* ready/busy */
+       int             enable_pin;     /* chip enable */
+       int             det_pin;        /* card detect */
+       int             rdy_pin;        /* ready/busy */
        u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
        u8              ale;            /* address line number connected to ALE */
        u8              cle;            /* address line number connected to CLE */