.shutdown = serial_port_shutdown,
};
+struct usb_serial_endpoints {
+ unsigned char num_bulk_in;
+ unsigned char num_bulk_out;
+ unsigned char num_interrupt_in;
+ unsigned char num_interrupt_out;
+ struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS];
+ struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS];
+};
+
+static void find_endpoints(struct usb_serial *serial,
+ struct usb_serial_endpoints *epds)
+{
+ struct device *dev = &serial->interface->dev;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *epd;
+ unsigned int i;
+
+ iface_desc = serial->interface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ epd = &iface_desc->endpoint[i].desc;
+
+ if (usb_endpoint_is_bulk_in(epd)) {
+ dev_dbg(dev, "found bulk in on endpoint %u\n", i);
+ if (epds->num_bulk_in == MAX_NUM_PORTS)
+ continue;
+ epds->bulk_in[epds->num_bulk_in++] = epd;
+ } else if (usb_endpoint_is_bulk_out(epd)) {
+ dev_dbg(dev, "found bulk out on endpoint %u\n", i);
+ if (epds->num_bulk_out == MAX_NUM_PORTS)
+ continue;
+ epds->bulk_out[epds->num_bulk_out++] = epd;
+ } else if (usb_endpoint_is_int_in(epd)) {
+ dev_dbg(dev, "found interrupt in on endpoint %u\n", i);
+ if (epds->num_interrupt_in == MAX_NUM_PORTS)
+ continue;
+ epds->interrupt_in[epds->num_interrupt_in++] = epd;
+ } else if (usb_endpoint_is_int_out(epd)) {
+ dev_dbg(dev, "found interrupt out on endpoint %u\n", i);
+ if (epds->num_interrupt_out == MAX_NUM_PORTS)
+ continue;
+ epds->interrupt_out[epds->num_interrupt_out++] = epd;
+ }
+ }
+}
+
static int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(interface);
struct usb_serial *serial = NULL;
struct usb_serial_port *port;
- struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
- struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
- struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
- struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
- struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
+ struct usb_serial_endpoints *epds;
struct usb_serial_driver *type = NULL;
int retval;
int buffer_size;
int i;
int j;
- unsigned char num_interrupt_in = 0;
- unsigned char num_interrupt_out = 0;
- unsigned char num_bulk_in = 0;
- unsigned char num_bulk_out = 0;
int num_ports = 0;
unsigned char max_endpoints;
}
/* descriptor matches, let's find the endpoints needed */
- /* check out the endpoints */
- iface_desc = interface->cur_altsetting;
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (usb_endpoint_is_bulk_in(endpoint)) {
- /* we found a bulk in endpoint */
- dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
- if (num_bulk_in < MAX_NUM_PORTS) {
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
- }
- }
-
- if (usb_endpoint_is_bulk_out(endpoint)) {
- /* we found a bulk out endpoint */
- dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
- if (num_bulk_out < MAX_NUM_PORTS) {
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
- }
- }
-
- if (usb_endpoint_is_int_in(endpoint)) {
- /* we found a interrupt in endpoint */
- dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
- if (num_interrupt_in < MAX_NUM_PORTS) {
- interrupt_in_endpoint[num_interrupt_in] =
- endpoint;
- ++num_interrupt_in;
- }
- }
-
- if (usb_endpoint_is_int_out(endpoint)) {
- /* we found an interrupt out endpoint */
- dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
- if (num_interrupt_out < MAX_NUM_PORTS) {
- interrupt_out_endpoint[num_interrupt_out] =
- endpoint;
- ++num_interrupt_out;
- }
- }
+ epds = kzalloc(sizeof(*epds), GFP_KERNEL);
+ if (!epds) {
+ retval = -ENOMEM;
+ goto err_put_serial;
}
+ find_endpoints(serial, epds);
+
#if IS_ENABLED(CONFIG_USB_SERIAL_PL2303)
/* BEGIN HORRIBLE HACK FOR PL2303 */
/* this is needed due to the looney way its endpoints are set up */
((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
if (interface != dev->actconfig->interface[0]) {
+ struct usb_host_interface *iface_desc;
+
/* check out the endpoints of the other interface*/
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
- if (num_interrupt_in < MAX_NUM_PORTS) {
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
- }
+ if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
+ epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
}
}
}
* If not, give up now and hope this hack will work
* properly during a later invocation of usb_serial_probe
*/
- if (num_bulk_in == 0 || num_bulk_out == 0) {
+ if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) {
dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
retval = -ENODEV;
+ kfree(epds);
goto err_put_serial;
}
}
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
- num_ports = num_bulk_out;
+ num_ports = epds->num_bulk_out;
if (num_ports == 0) {
dev_err(ddev, "Generic device with no bulk out, not allowed.\n");
retval = -EIO;
+ kfree(epds);
goto err_put_serial;
}
dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
}
serial->num_ports = (unsigned char)num_ports;
- serial->num_bulk_in = num_bulk_in;
- serial->num_bulk_out = num_bulk_out;
- serial->num_interrupt_in = num_interrupt_in;
- serial->num_interrupt_out = num_interrupt_out;
+ serial->num_bulk_in = epds->num_bulk_in;
+ serial->num_bulk_out = epds->num_bulk_out;
+ serial->num_interrupt_in = epds->num_interrupt_in;
+ serial->num_interrupt_out = epds->num_interrupt_out;
/* found all that we need */
dev_info(ddev, "%s converter detected\n", type->description);
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here because some devices have more
endpoint pairs than ports */
- max_endpoints = max(num_bulk_in, num_bulk_out);
- max_endpoints = max(max_endpoints, num_interrupt_in);
- max_endpoints = max(max_endpoints, num_interrupt_out);
+ max_endpoints = max(epds->num_bulk_in, epds->num_bulk_out);
+ max_endpoints = max(max_endpoints, epds->num_interrupt_in);
+ max_endpoints = max(max_endpoints, epds->num_interrupt_out);
max_endpoints = max(max_endpoints, serial->num_ports);
serial->num_port_pointers = max_endpoints;
}
/* set up the endpoint information */
- for (i = 0; i < num_bulk_in; ++i) {
- endpoint = bulk_in_endpoint[i];
+ for (i = 0; i < epds->num_bulk_in; ++i) {
+ endpoint = epds->bulk_in[i];
port = serial->port[i];
buffer_size = max_t(int, serial->type->bulk_in_size,
usb_endpoint_maxp(endpoint));
port->bulk_in_buffer = port->bulk_in_buffers[0];
}
- for (i = 0; i < num_bulk_out; ++i) {
- endpoint = bulk_out_endpoint[i];
+ for (i = 0; i < epds->num_bulk_out; ++i) {
+ endpoint = epds->bulk_out[i];
port = serial->port[i];
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
}
if (serial->type->read_int_callback) {
- for (i = 0; i < num_interrupt_in; ++i) {
- endpoint = interrupt_in_endpoint[i];
+ for (i = 0; i < epds->num_interrupt_in; ++i) {
+ endpoint = epds->interrupt_in[i];
port = serial->port[i];
port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_in_urb)
serial->type->read_int_callback, port,
endpoint->bInterval);
}
- } else if (num_interrupt_in) {
+ } else if (epds->num_interrupt_in) {
dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
}
if (serial->type->write_int_callback) {
- for (i = 0; i < num_interrupt_out; ++i) {
- endpoint = interrupt_out_endpoint[i];
+ for (i = 0; i < epds->num_interrupt_out; ++i) {
+ endpoint = epds->interrupt_out[i];
port = serial->port[i];
port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_out_urb)
serial->type->write_int_callback, port,
endpoint->bInterval);
}
- } else if (num_interrupt_out) {
+ } else if (epds->num_interrupt_out) {
dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
}
if (num_ports > 0)
usb_serial_console_init(serial->port[0]->minor);
exit:
+ kfree(epds);
module_put(type->driver.owner);
return 0;
projects / karo-tx-linux.git / commitdiff