--- /dev/null
+/*
+ * Copyright (c) 2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "ar9003_phy.h"
+#include "ar9003_eeprom.h"
+
+#define COMP_HDR_LEN 4
+#define COMP_CKSUM_LEN 2
+
+#define AR_CH0_TOP (0x00016288)
+#define AR_CH0_TOP_XPABIASLVL (0x3)
+#define AR_CH0_TOP_XPABIASLVL_S (8)
+
+#define AR_CH0_THERM (0x00016290)
+#define AR_CH0_THERM_SPARE (0x3f)
+#define AR_CH0_THERM_SPARE_S (0)
+
+#define AR_SWITCH_TABLE_COM_ALL (0xffff)
+#define AR_SWITCH_TABLE_COM_ALL_S (0)
+
+#define AR_SWITCH_TABLE_COM2_ALL (0xffffff)
+#define AR_SWITCH_TABLE_COM2_ALL_S (0)
+
+#define AR_SWITCH_TABLE_ALL (0xfff)
+#define AR_SWITCH_TABLE_ALL_S (0)
+
+static const struct ar9300_eeprom ar9300_default = {
+ .eepromVersion = 2,
+ .templateVersion = 2,
+ .macAddr = {1, 2, 3, 4, 5, 6},
+ .custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+ .baseEepHeader = {
+ .regDmn = {0, 0x1f},
+ .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
+ .opCapFlags = {
+ .opFlags = AR9300_OPFLAGS_11G | AR9300_OPFLAGS_11A,
+ .eepMisc = 0,
+ },
+ .rfSilent = 0,
+ .blueToothOptions = 0,
+ .deviceCap = 0,
+ .deviceType = 5, /* takes lower byte in eeprom location */
+ .pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
+ .params_for_tuning_caps = {0, 0},
+ .featureEnable = 0x0c,
+ /*
+ * bit0 - enable tx temp comp - disabled
+ * bit1 - enable tx volt comp - disabled
+ * bit2 - enable fastClock - enabled
+ * bit3 - enable doubling - enabled
+ * bit4 - enable internal regulator - disabled
+ */
+ .miscConfiguration = 0, /* bit0 - turn down drivestrength */
+ .eepromWriteEnableGpio = 3,
+ .wlanDisableGpio = 0,
+ .wlanLedGpio = 8,
+ .rxBandSelectGpio = 0xff,
+ .txrxgain = 0,
+ .swreg = 0,
+ },
+ .modalHeader2G = {
+ /* ar9300_modal_eep_header 2g */
+ /* 4 idle,t1,t2,b(4 bits per setting) */
+ .antCtrlCommon = 0x110,
+ /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
+ .antCtrlCommon2 = 0x22222,
+
+ /*
+ * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
+ * rx1, rx12, b (2 bits each)
+ */
+ .antCtrlChain = {0x150, 0x150, 0x150},
+
+ /*
+ * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db
+ * for ar9280 (0xa20c/b20c 5:0)
+ */
+ .xatten1DB = {0, 0, 0},
+
+ /*
+ * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+ * for ar9280 (0xa20c/b20c 16:12
+ */
+ .xatten1Margin = {0, 0, 0},
+ .tempSlope = 36,
+ .voltSlope = 0,
+
+ /*
+ * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
+ * channels in usual fbin coding format
+ */
+ .spurChans = {0, 0, 0, 0, 0},
+
+ /*
+ * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
+ * if the register is per chain
+ */
+ .noiseFloorThreshCh = {-1, 0, 0},
+ .ob = {1, 1, 1},/* 3 chain */
+ .db_stage2 = {1, 1, 1}, /* 3 chain */
+ .db_stage3 = {0, 0, 0},
+ .db_stage4 = {0, 0, 0},
+ .xpaBiasLvl = 0,
+ .txFrameToDataStart = 0x0e,
+ .txFrameToPaOn = 0x0e,
+ .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+ .antennaGain = 0,
+ .switchSettling = 0x2c,
+ .adcDesiredSize = -30,
+ .txEndToXpaOff = 0,
+ .txEndToRxOn = 0x2,
+ .txFrameToXpaOn = 0xe,
+ .thresh62 = 28,
+ .futureModal = { /* [32] */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ },
+ },
+ .calFreqPier2G = {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2437, 1),
+ FREQ2FBIN(2472, 1),
+ },
+ /* ar9300_cal_data_per_freq_op_loop 2g */
+ .calPierData2G = {
+ { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+ { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+ { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+ },
+ .calTarget_freqbin_Cck = {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2484, 1),
+ },
+ .calTarget_freqbin_2G = {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2437, 1),
+ FREQ2FBIN(2472, 1)
+ },
+ .calTarget_freqbin_2GHT20 = {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2437, 1),
+ FREQ2FBIN(2472, 1)
+ },
+ .calTarget_freqbin_2GHT40 = {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2437, 1),
+ FREQ2FBIN(2472, 1)
+ },
+ .calTargetPowerCck = {
+ /* 1L-5L,5S,11L,11S */
+ { {36, 36, 36, 36} },
+ { {36, 36, 36, 36} },
+ },
+ .calTargetPower2G = {
+ /* 6-24,36,48,54 */
+ { {32, 32, 28, 24} },
+ { {32, 32, 28, 24} },
+ { {32, 32, 28, 24} },
+ },
+ .calTargetPower2GHT20 = {
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ },
+ .calTargetPower2GHT40 = {
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} },
+ },
+ .ctlIndex_2G = {
+ 0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
+ 0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
+ },
+ .ctl_freqbin_2G = {
+ {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2417, 1),
+ FREQ2FBIN(2457, 1),
+ FREQ2FBIN(2462, 1)
+ },
+ {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2417, 1),
+ FREQ2FBIN(2462, 1),
+ 0xFF,
+ },
+
+ {
+ FREQ2FBIN(2412, 1),
+ FREQ2FBIN(2417, 1),
+ FREQ2FBIN(2462, 1),
+ 0xFF,
+ },
+ {
+ FREQ2FBIN(2422, 1),
+ FREQ2FBIN(2427, 1),
+ FREQ2FBIN(2447, 1),
+ FREQ2FBIN(2452, 1)
+ },
+
+ {
+ /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+ /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
+ },
+
+ {
+ /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+ 0,
+ },
+
+ {
+ /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ FREQ2FBIN(2472, 1),
+ 0,
+ },
+
+ {
+ /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+ /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+ /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+ /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+ },
+
+ {
+ /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+ },
+
+ {
+ /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+ 0
+ },
+
+ {
+ /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+ /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+ /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+ 0
+ },
+
+ {
+ /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+ /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+ /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+ /* Data[11].ctlEdges[3].bChannel */
+ FREQ2FBIN(2462, 1),
+ }
+ },
+ .ctlPowerData_2G = {
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+
+ { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+
+ { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+
+ { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+ },
+ .modalHeader5G = {
+ /* 4 idle,t1,t2,b (4 bits per setting) */
+ .antCtrlCommon = 0x110,
+ /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
+ .antCtrlCommon2 = 0x22222,
+ /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
+ .antCtrlChain = {
+ 0x000, 0x000, 0x000,
+ },
+ /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
+ .xatten1DB = {0, 0, 0},
+
+ /*
+ * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+ * for merlin (0xa20c/b20c 16:12
+ */
+ .xatten1Margin = {0, 0, 0},
+ .tempSlope = 68,
+ .voltSlope = 0,
+ /* spurChans spur channels in usual fbin coding format */
+ .spurChans = {0, 0, 0, 0, 0},
+ /* noiseFloorThreshCh Check if the register is per chain */
+ .noiseFloorThreshCh = {-1, 0, 0},
+ .ob = {3, 3, 3}, /* 3 chain */
+ .db_stage2 = {3, 3, 3}, /* 3 chain */
+ .db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
+ .db_stage4 = {3, 3, 3}, /* don't exist for 2G */
+ .xpaBiasLvl = 0,
+ .txFrameToDataStart = 0x0e,
+ .txFrameToPaOn = 0x0e,
+ .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+ .antennaGain = 0,
+ .switchSettling = 0x2d,
+ .adcDesiredSize = -30,
+ .txEndToXpaOff = 0,
+ .txEndToRxOn = 0x2,
+ .txFrameToXpaOn = 0xe,
+ .thresh62 = 28,
+ .futureModal = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+ },
+ },
+ .calFreqPier5G = {
+ FREQ2FBIN(5180, 0),
+ FREQ2FBIN(5220, 0),
+ FREQ2FBIN(5320, 0),
+ FREQ2FBIN(5400, 0),
+ FREQ2FBIN(5500, 0),
+ FREQ2FBIN(5600, 0),
+ FREQ2FBIN(5725, 0),
+ FREQ2FBIN(5825, 0)
+ },
+ .calPierData5G = {
+ {
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ },
+ {
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ },
+ {
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0},
+ },
+
+ },
+ .calTarget_freqbin_5G = {
+ FREQ2FBIN(5180, 0),
+ FREQ2FBIN(5220, 0),
+ FREQ2FBIN(5320, 0),
+ FREQ2FBIN(5400, 0),
+ FREQ2FBIN(5500, 0),
+ FREQ2FBIN(5600, 0),
+ FREQ2FBIN(5725, 0),
+ FREQ2FBIN(5825, 0)
+ },
+ .calTarget_freqbin_5GHT20 = {
+ FREQ2FBIN(5180, 0),
+ FREQ2FBIN(5240, 0),
+ FREQ2FBIN(5320, 0),
+ FREQ2FBIN(5500, 0),
+ FREQ2FBIN(5700, 0),
+ FREQ2FBIN(5745, 0),
+ FREQ2FBIN(5725, 0),
+ FREQ2FBIN(5825, 0)
+ },
+ .calTarget_freqbin_5GHT40 = {
+ FREQ2FBIN(5180, 0),
+ FREQ2FBIN(5240, 0),
+ FREQ2FBIN(5320, 0),
+ FREQ2FBIN(5500, 0),
+ FREQ2FBIN(5700, 0),
+ FREQ2FBIN(5745, 0),
+ FREQ2FBIN(5725, 0),
+ FREQ2FBIN(5825, 0)
+ },
+ .calTargetPower5G = {
+ /* 6-24,36,48,54 */
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ { {20, 20, 20, 10} },
+ },
+ .calTargetPower5GHT20 = {
+ /*
+ * 0_8_16,1-3_9-11_17-19,
+ * 4,5,6,7,12,13,14,15,20,21,22,23
+ */
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ },
+ .calTargetPower5GHT40 = {
+ /*
+ * 0_8_16,1-3_9-11_17-19,
+ * 4,5,6,7,12,13,14,15,20,21,22,23
+ */
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} },
+ },
+ .ctlIndex_5G = {
+ 0x10, 0x16, 0x18, 0x40, 0x46,
+ 0x48, 0x30, 0x36, 0x38
+ },
+ .ctl_freqbin_5G = {
+ {
+ /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+ /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
+ /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+ /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+ },
+ {
+ /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+ /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
+ /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+ /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+ },
+
+ {
+ /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+ /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+ /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+ /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
+ /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
+ /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
+ /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
+ /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
+ },
+
+ {
+ /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+ /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
+ /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[3].ctlEdges[6].bChannel */ 0xFF,
+ /* Data[3].ctlEdges[7].bChannel */ 0xFF,
+ },
+
+ {
+ /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[4].ctlEdges[4].bChannel */ 0xFF,
+ /* Data[4].ctlEdges[5].bChannel */ 0xFF,
+ /* Data[4].ctlEdges[6].bChannel */ 0xFF,
+ /* Data[4].ctlEdges[7].bChannel */ 0xFF,
+ },
+
+ {
+ /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+ /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
+ /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
+ /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+ /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
+ /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+ /* Data[5].ctlEdges[6].bChannel */ 0xFF,
+ /* Data[5].ctlEdges[7].bChannel */ 0xFF
+ },
+
+ {
+ /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+ /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
+ /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
+ /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
+ },
+
+ {
+ /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+ /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+ /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
+ /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+ /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
+ /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+ /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+ /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+ },
+
+ {
+ /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+ /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+ /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+ /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+ /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
+ /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+ /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
+ /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
+ }
+ },
+ .ctlPowerData_5G = {
+ {
+ {
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 0}, {60, 1}, {60, 0}, {60, 1},
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ }
+ },
+ {
+ {
+ {60, 0}, {60, 1}, {60, 1}, {60, 0},
+ {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ {60, 0}, {60, 0}, {60, 0}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ }
+ },
+ {
+ {
+ {60, 1}, {60, 0}, {60, 1}, {60, 1},
+ {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ }
+ },
+ }
+};
+
+static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah)
+{
+ return 0;
+}
+
+static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
+ enum eeprom_param param)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader;
+
+ switch (param) {
+ case EEP_MAC_LSW:
+ return eep->macAddr[0] << 8 | eep->macAddr[1];
+ case EEP_MAC_MID:
+ return eep->macAddr[2] << 8 | eep->macAddr[3];
+ case EEP_MAC_MSW:
+ return eep->macAddr[4] << 8 | eep->macAddr[5];
+ case EEP_REG_0:
+ return pBase->regDmn[0];
+ case EEP_REG_1:
+ return pBase->regDmn[1];
+ case EEP_OP_CAP:
+ return pBase->deviceCap;
+ case EEP_OP_MODE:
+ return pBase->opCapFlags.opFlags;
+ case EEP_RF_SILENT:
+ return pBase->rfSilent;
+ case EEP_TX_MASK:
+ return (pBase->txrxMask >> 4) & 0xf;
+ case EEP_RX_MASK:
+ return pBase->txrxMask & 0xf;
+ case EEP_DRIVE_STRENGTH:
+#define AR9300_EEP_BASE_DRIV_STRENGTH 0x1
+ return pBase->miscConfiguration & AR9300_EEP_BASE_DRIV_STRENGTH;
+ case EEP_INTERNAL_REGULATOR:
+ /* Bit 4 is internal regulator flag */
+ return (pBase->featureEnable & 0x10) >> 4;
+ case EEP_SWREG:
+ return pBase->swreg;
+ default:
+ return 0;
+ }
+}
+
+#ifdef __BIG_ENDIAN
+static void ar9300_swap_eeprom(struct ar9300_eeprom *eep)
+{
+ u32 dword;
+ u16 word;
+ int i;
+
+ word = swab16(eep->baseEepHeader.regDmn[0]);
+ eep->baseEepHeader.regDmn[0] = word;
+
+ word = swab16(eep->baseEepHeader.regDmn[1]);
+ eep->baseEepHeader.regDmn[1] = word;
+
+ dword = swab32(eep->modalHeader2G.antCtrlCommon);
+ eep->modalHeader2G.antCtrlCommon = dword;
+
+ dword = swab32(eep->modalHeader2G.antCtrlCommon2);
+ eep->modalHeader2G.antCtrlCommon2 = dword;
+
+ dword = swab32(eep->modalHeader5G.antCtrlCommon);
+ eep->modalHeader5G.antCtrlCommon = dword;
+
+ dword = swab32(eep->modalHeader5G.antCtrlCommon2);
+ eep->modalHeader5G.antCtrlCommon2 = dword;
+
+ for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+ word = swab16(eep->modalHeader2G.antCtrlChain[i]);
+ eep->modalHeader2G.antCtrlChain[i] = word;
+
+ word = swab16(eep->modalHeader5G.antCtrlChain[i]);
+ eep->modalHeader5G.antCtrlChain[i] = word;
+ }
+}
+#endif
+
+static bool ar9300_hw_read_eeprom(struct ath_hw *ah,
+ long address, u8 *buffer, int many)
+{
+ int i;
+ u8 value[2];
+ unsigned long eepAddr;
+ unsigned long byteAddr;
+ u16 *svalue;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if ((address < 0) || ((address + many) > AR9300_EEPROM_SIZE - 1)) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "eeprom address not in range\n");
+ return false;
+ }
+
+ for (i = 0; i < many; i++) {
+ eepAddr = (u16) (address + i) / 2;
+ byteAddr = (u16) (address + i) % 2;
+ svalue = (u16 *) value;
+ if (!ath9k_hw_nvram_read(common, eepAddr, svalue)) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "unable to read eeprom region\n");
+ return false;
+ }
+ *svalue = le16_to_cpu(*svalue);
+ buffer[i] = value[byteAddr];
+ }
+
+ return true;
+}
+
+static bool ar9300_read_eeprom(struct ath_hw *ah,
+ int address, u8 *buffer, int many)
+{
+ int it;
+
+ for (it = 0; it < many; it++)
+ if (!ar9300_hw_read_eeprom(ah,
+ (address - it),
+ (buffer + it), 1))
+ return false;
+ return true;
+}
+
+static void ar9300_comp_hdr_unpack(u8 *best, int *code, int *reference,
+ int *length, int *major, int *minor)
+{
+ unsigned long value[4];
+
+ value[0] = best[0];
+ value[1] = best[1];
+ value[2] = best[2];
+ value[3] = best[3];
+ *code = ((value[0] >> 5) & 0x0007);
+ *reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020);
+ *length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f);
+ *major = (value[2] & 0x000f);
+ *minor = (value[3] & 0x00ff);
+}
+
+static u16 ar9300_comp_cksum(u8 *data, int dsize)
+{
+ int it, checksum = 0;
+
+ for (it = 0; it < dsize; it++) {
+ checksum += data[it];
+ checksum &= 0xffff;
+ }
+
+ return checksum;
+}
+
+static bool ar9300_uncompress_block(struct ath_hw *ah,
+ u8 *mptr,
+ int mdataSize,
+ u8 *block,
+ int size)
+{
+ int it;
+ int spot;
+ int offset;
+ int length;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ spot = 0;
+
+ for (it = 0; it < size; it += (length+2)) {
+ offset = block[it];
+ offset &= 0xff;
+ spot += offset;
+ length = block[it+1];
+ length &= 0xff;
+
+ if (length > 0 && spot >= 0 && spot+length < mdataSize) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Restore at %d: spot=%d "
+ "offset=%d length=%d\n",
+ it, spot, offset, length);
+ memcpy(&mptr[spot], &block[it+2], length);
+ spot += length;
+ } else if (length > 0) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Bad restore at %d: spot=%d "
+ "offset=%d length=%d\n",
+ it, spot, offset, length);
+ return false;
+ }
+ }
+ return true;
+}
+
+static int ar9300_compress_decision(struct ath_hw *ah,
+ int it,
+ int code,
+ int reference,
+ u8 *mptr,
+ u8 *word, int length, int mdata_size)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u8 *dptr;
+
+ switch (code) {
+ case _CompressNone:
+ if (length != mdata_size) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "EEPROM structure size mismatch"
+ "memory=%d eeprom=%d\n", mdata_size, length);
+ return -1;
+ }
+ memcpy(mptr, (u8 *) (word + COMP_HDR_LEN), length);
+ ath_print(common, ATH_DBG_EEPROM, "restored eeprom %d:"
+ " uncompressed, length %d\n", it, length);
+ break;
+ case _CompressBlock:
+ if (reference == 0) {
+ dptr = mptr;
+ } else {
+ if (reference != 2) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "cant find reference eeprom"
+ "struct %d\n", reference);
+ return -1;
+ }
+ memcpy(mptr, &ar9300_default, mdata_size);
+ }
+ ath_print(common, ATH_DBG_EEPROM,
+ "restore eeprom %d: block, reference %d,"
+ " length %d\n", it, reference, length);
+ ar9300_uncompress_block(ah, mptr, mdata_size,
+ (u8 *) (word + COMP_HDR_LEN), length);
+ break;
+ default:
+ ath_print(common, ATH_DBG_EEPROM, "unknown compression"
+ " code %d\n", code);
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Read the configuration data from the eeprom.
+ * The data can be put in any specified memory buffer.
+ *
+ * Returns -1 on error.
+ * Returns address of next memory location on success.
+ */
+static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
+ u8 *mptr, int mdata_size)
+{
+#define MDEFAULT 15
+#define MSTATE 100
+ int cptr;
+ u8 *word;
+ int code;
+ int reference, length, major, minor;
+ int osize;
+ int it;
+ u16 checksum, mchecksum;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ word = kzalloc(2048, GFP_KERNEL);
+ if (!word)
+ return -1;
+
+ memcpy(mptr, &ar9300_default, mdata_size);
+
+ cptr = AR9300_BASE_ADDR;
+ for (it = 0; it < MSTATE; it++) {
+ if (!ar9300_read_eeprom(ah, cptr, word, COMP_HDR_LEN))
+ goto fail;
+
+ if ((word[0] == 0 && word[1] == 0 && word[2] == 0 &&
+ word[3] == 0) || (word[0] == 0xff && word[1] == 0xff
+ && word[2] == 0xff && word[3] == 0xff))
+ break;
+
+ ar9300_comp_hdr_unpack(word, &code, &reference,
+ &length, &major, &minor);
+ ath_print(common, ATH_DBG_EEPROM,
+ "Found block at %x: code=%d ref=%d"
+ "length=%d major=%d minor=%d\n", cptr, code,
+ reference, length, major, minor);
+ if (length >= 1024) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Skipping bad header\n");
+ cptr -= COMP_HDR_LEN;
+ continue;
+ }
+
+ osize = length;
+ ar9300_read_eeprom(ah, cptr, word,
+ COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
+ checksum = ar9300_comp_cksum(&word[COMP_HDR_LEN], length);
+ mchecksum = word[COMP_HDR_LEN + osize] |
+ (word[COMP_HDR_LEN + osize + 1] << 8);
+ ath_print(common, ATH_DBG_EEPROM,
+ "checksum %x %x\n", checksum, mchecksum);
+ if (checksum == mchecksum) {
+ ar9300_compress_decision(ah, it, code, reference, mptr,
+ word, length, mdata_size);
+ } else {
+ ath_print(common, ATH_DBG_EEPROM,
+ "skipping block with bad checksum\n");
+ }
+ cptr -= (COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
+ }
+
+ kfree(word);
+ return cptr;
+
+fail:
+ kfree(word);
+ return -1;
+}
+
+/*
+ * Restore the configuration structure by reading the eeprom.
+ * This function destroys any existing in-memory structure
+ * content.
+ */
+static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah)
+{
+ u8 *mptr = NULL;
+ int mdata_size;
+
+ mptr = (u8 *) &ah->eeprom.ar9300_eep;
+ mdata_size = sizeof(struct ar9300_eeprom);
+
+ if (mptr && mdata_size > 0) {
+ /* At this point, mptr points to the eeprom data structure
+ * in it's "default" state. If this is big endian, swap the
+ * data structures back to "little endian"
+ */
+ /* First swap, default to Little Endian */
+#ifdef __BIG_ENDIAN
+ ar9300_swap_eeprom((struct ar9300_eeprom *)mptr);
+#endif
+ if (ar9300_eeprom_restore_internal(ah, mptr, mdata_size) >= 0)
+ return true;
+
+ /* Second Swap, back to Big Endian */
+#ifdef __BIG_ENDIAN
+ ar9300_swap_eeprom((struct ar9300_eeprom *)mptr);
+#endif
+ }
+ return false;
+}
+
+/* XXX: review hardware docs */
+static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah)
+{
+ return ah->eeprom.ar9300_eep.eepromVersion;
+}
+
+/* XXX: could be read from the eepromVersion, not sure yet */
+static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
+{
+ return 0;
+}
+
+static u8 ath9k_hw_ar9300_get_num_ant_config(struct ath_hw *ah,
+ enum ieee80211_band freq_band)
+{
+ return 1;
+}
+
+static u16 ath9k_hw_ar9300_get_eeprom_antenna_cfg(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ return -EINVAL;
+}
+
+static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ if (is2ghz)
+ return eep->modalHeader2G.xpaBiasLvl;
+ else
+ return eep->modalHeader5G.xpaBiasLvl;
+}
+
+static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
+{
+ int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
+ REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, (bias & 0x3));
+ REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_SPARE,
+ ((bias >> 2) & 0x3));
+}
+
+static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ if (is2ghz)
+ return eep->modalHeader2G.antCtrlCommon;
+ else
+ return eep->modalHeader5G.antCtrlCommon;
+}
+
+static u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ if (is2ghz)
+ return eep->modalHeader2G.antCtrlCommon2;
+ else
+ return eep->modalHeader5G.antCtrlCommon2;
+}
+
+static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah,
+ int chain,
+ bool is2ghz)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ if (chain >= 0 && chain < AR9300_MAX_CHAINS) {
+ if (is2ghz)
+ return eep->modalHeader2G.antCtrlChain[chain];
+ else
+ return eep->modalHeader5G.antCtrlChain[chain];
+ }
+
+ return 0;
+}
+
+static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
+{
+ u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+ REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, AR_SWITCH_TABLE_COM_ALL, value);
+
+ value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz);
+ REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value);
+
+ value = ar9003_hw_ant_ctrl_chain_get(ah, 0, is2ghz);
+ REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value);
+
+ value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz);
+ REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL, value);
+
+ value = ar9003_hw_ant_ctrl_chain_get(ah, 2, is2ghz);
+ REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL, value);
+}
+
+static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
+{
+ int drive_strength;
+ unsigned long reg;
+
+ drive_strength = ath9k_hw_ar9300_get_eeprom(ah, EEP_DRIVE_STRENGTH);
+
+ if (!drive_strength)
+ return;
+
+ reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS1);
+ reg &= ~0x00ffffc0;
+ reg |= 0x5 << 21;
+ reg |= 0x5 << 18;
+ reg |= 0x5 << 15;
+ reg |= 0x5 << 12;
+ reg |= 0x5 << 9;
+ reg |= 0x5 << 6;
+ REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg);
+
+ reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS2);
+ reg &= ~0xffffffe0;
+ reg |= 0x5 << 29;
+ reg |= 0x5 << 26;
+ reg |= 0x5 << 23;
+ reg |= 0x5 << 20;
+ reg |= 0x5 << 17;
+ reg |= 0x5 << 14;
+ reg |= 0x5 << 11;
+ reg |= 0x5 << 8;
+ reg |= 0x5 << 5;
+ REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg);
+
+ reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS4);
+ reg &= ~0xff800000;
+ reg |= 0x5 << 29;
+ reg |= 0x5 << 26;
+ reg |= 0x5 << 23;
+ REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg);
+}
+
+static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
+{
+ int internal_regulator =
+ ath9k_hw_ar9300_get_eeprom(ah, EEP_INTERNAL_REGULATOR);
+
+ if (internal_regulator) {
+ /* Internal regulator is ON. Write swreg register. */
+ int swreg = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG);
+ REG_WRITE(ah, AR_RTC_REG_CONTROL1,
+ REG_READ(ah, AR_RTC_REG_CONTROL1) &
+ (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM));
+ REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg);
+ /* Set REG_CONTROL1.SWREG_PROGRAM */
+ REG_WRITE(ah, AR_RTC_REG_CONTROL1,
+ REG_READ(ah,
+ AR_RTC_REG_CONTROL1) |
+ AR_RTC_REG_CONTROL1_SWREG_PROGRAM);
+ } else {
+ REG_WRITE(ah, AR_RTC_SLEEP_CLK,
+ (REG_READ(ah,
+ AR_RTC_SLEEP_CLK) |
+ AR_RTC_FORCE_SWREG_PRD));
+ }
+}
+
+static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ ar9003_hw_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan));
+ ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan));
+ ar9003_hw_drive_strength_apply(ah);
+ ar9003_hw_internal_regulator_apply(ah);
+}
+
+static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+}
+
+/*
+ * Returns the interpolated y value corresponding to the specified x value
+ * from the np ordered pairs of data (px,py).
+ * The pairs do not have to be in any order.
+ * If the specified x value is less than any of the px,
+ * the returned y value is equal to the py for the lowest px.
+ * If the specified x value is greater than any of the px,
+ * the returned y value is equal to the py for the highest px.
+ */
+static int ar9003_hw_power_interpolate(int32_t x,
+ int32_t *px, int32_t *py, u_int16_t np)
+{
+ int ip = 0;
+ int lx = 0, ly = 0, lhave = 0;
+ int hx = 0, hy = 0, hhave = 0;
+ int dx = 0;
+ int y = 0;
+
+ lhave = 0;
+ hhave = 0;
+
+ /* identify best lower and higher x calibration measurement */
+ for (ip = 0; ip < np; ip++) {
+ dx = x - px[ip];
+
+ /* this measurement is higher than our desired x */
+ if (dx <= 0) {
+ if (!hhave || dx > (x - hx)) {
+ /* new best higher x measurement */
+ hx = px[ip];
+ hy = py[ip];
+ hhave = 1;
+ }
+ }
+ /* this measurement is lower than our desired x */
+ if (dx >= 0) {
+ if (!lhave || dx < (x - lx)) {
+ /* new best lower x measurement */
+ lx = px[ip];
+ ly = py[ip];
+ lhave = 1;
+ }
+ }
+ }
+
+ /* the low x is good */
+ if (lhave) {
+ /* so is the high x */
+ if (hhave) {
+ /* they're the same, so just pick one */
+ if (hx == lx)
+ y = ly;
+ else /* interpolate */
+ y = ly + (((x - lx) * (hy - ly)) / (hx - lx));
+ } else /* only low is good, use it */
+ y = ly;
+ } else if (hhave) /* only high is good, use it */
+ y = hy;
+ else /* nothing is good,this should never happen unless np=0, ???? */
+ y = -(1 << 30);
+ return y;
+}
+
+static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah,
+ u16 rateIndex, u16 freq, bool is2GHz)
+{
+ u16 numPiers, i;
+ s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
+ s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct cal_tgt_pow_legacy *pEepromTargetPwr;
+ u8 *pFreqBin;
+
+ if (is2GHz) {
+ numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower2G;
+ pFreqBin = eep->calTarget_freqbin_2G;
+ } else {
+ numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower5G;
+ pFreqBin = eep->calTarget_freqbin_5G;
+ }
+
+ /*
+ * create array of channels and targetpower from
+ * targetpower piers stored on eeprom
+ */
+ for (i = 0; i < numPiers; i++) {
+ freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz);
+ targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ }
+
+ /* interpolate to get target power for given frequency */
+ return (u8) ar9003_hw_power_interpolate((s32) freq,
+ freqArray,
+ targetPowerArray, numPiers);
+}
+
+static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah,
+ u16 rateIndex,
+ u16 freq, bool is2GHz)
+{
+ u16 numPiers, i;
+ s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS];
+ s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS];
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct cal_tgt_pow_ht *pEepromTargetPwr;
+ u8 *pFreqBin;
+
+ if (is2GHz) {
+ numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower2GHT20;
+ pFreqBin = eep->calTarget_freqbin_2GHT20;
+ } else {
+ numPiers = AR9300_NUM_5G_20_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower5GHT20;
+ pFreqBin = eep->calTarget_freqbin_5GHT20;
+ }
+
+ /*
+ * create array of channels and targetpower
+ * from targetpower piers stored on eeprom
+ */
+ for (i = 0; i < numPiers; i++) {
+ freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz);
+ targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ }
+
+ /* interpolate to get target power for given frequency */
+ return (u8) ar9003_hw_power_interpolate((s32) freq,
+ freqArray,
+ targetPowerArray, numPiers);
+}
+
+static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah,
+ u16 rateIndex,
+ u16 freq, bool is2GHz)
+{
+ u16 numPiers, i;
+ s32 targetPowerArray[AR9300_NUM_5G_40_TARGET_POWERS];
+ s32 freqArray[AR9300_NUM_5G_40_TARGET_POWERS];
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct cal_tgt_pow_ht *pEepromTargetPwr;
+ u8 *pFreqBin;
+
+ if (is2GHz) {
+ numPiers = AR9300_NUM_2G_40_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower2GHT40;
+ pFreqBin = eep->calTarget_freqbin_2GHT40;
+ } else {
+ numPiers = AR9300_NUM_5G_40_TARGET_POWERS;
+ pEepromTargetPwr = eep->calTargetPower5GHT40;
+ pFreqBin = eep->calTarget_freqbin_5GHT40;
+ }
+
+ /*
+ * create array of channels and targetpower from
+ * targetpower piers stored on eeprom
+ */
+ for (i = 0; i < numPiers; i++) {
+ freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz);
+ targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ }
+
+ /* interpolate to get target power for given frequency */
+ return (u8) ar9003_hw_power_interpolate((s32) freq,
+ freqArray,
+ targetPowerArray, numPiers);
+}
+
+static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah,
+ u16 rateIndex, u16 freq)
+{
+ u16 numPiers = AR9300_NUM_2G_CCK_TARGET_POWERS, i;
+ s32 targetPowerArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
+ s32 freqArray[AR9300_NUM_2G_CCK_TARGET_POWERS];
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct cal_tgt_pow_legacy *pEepromTargetPwr = eep->calTargetPowerCck;
+ u8 *pFreqBin = eep->calTarget_freqbin_Cck;
+
+ /*
+ * create array of channels and targetpower from
+ * targetpower piers stored on eeprom
+ */
+ for (i = 0; i < numPiers; i++) {
+ freqArray[i] = FBIN2FREQ(pFreqBin[i], 1);
+ targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex];
+ }
+
+ /* interpolate to get target power for given frequency */
+ return (u8) ar9003_hw_power_interpolate((s32) freq,
+ freqArray,
+ targetPowerArray, numPiers);
+}
+
+/* Set tx power registers to array of values passed in */
+static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
+{
+#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s))
+ /* make sure forced gain is not set */
+ REG_WRITE(ah, 0xa458, 0);
+
+ /* Write the OFDM power per rate set */
+
+ /* 6 (LSB), 9, 12, 18 (MSB) */
+ REG_WRITE(ah, 0xa3c0,
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0));
+
+ /* 24 (LSB), 36, 48, 54 (MSB) */
+ REG_WRITE(ah, 0xa3c4,
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_54], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_48], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_36], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0));
+
+ /* Write the CCK power per rate set */
+
+ /* 1L (LSB), reserved, 2L, 2S (MSB) */
+ REG_WRITE(ah, 0xa3c8,
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) |
+ /* POW_SM(txPowerTimes2, 8) | this is reserved for AR9003 */
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0));
+
+ /* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */
+ REG_WRITE(ah, 0xa3cc,
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_11S], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_11L], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_5S], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)
+ );
+
+ /* Write the HT20 power per rate set */
+
+ /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */
+ REG_WRITE(ah, 0xa3d0,
+ POW_SM(pPwrArray[ALL_TARGET_HT20_5], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_4], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_1_3_9_11_17_19], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_0_8_16], 0)
+ );
+
+ /* 6 (LSB), 7, 12, 13 (MSB) */
+ REG_WRITE(ah, 0xa3d4,
+ POW_SM(pPwrArray[ALL_TARGET_HT20_13], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_12], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_7], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_6], 0)
+ );
+
+ /* 14 (LSB), 15, 20, 21 */
+ REG_WRITE(ah, 0xa3e4,
+ POW_SM(pPwrArray[ALL_TARGET_HT20_21], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_20], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_15], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_14], 0)
+ );
+
+ /* Mixed HT20 and HT40 rates */
+
+ /* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */
+ REG_WRITE(ah, 0xa3e8,
+ POW_SM(pPwrArray[ALL_TARGET_HT40_23], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_22], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_23], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT20_22], 0)
+ );
+
+ /*
+ * Write the HT40 power per rate set
+ * correct PAR difference between HT40 and HT20/LEGACY
+ * 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB)
+ */
+ REG_WRITE(ah, 0xa3d8,
+ POW_SM(pPwrArray[ALL_TARGET_HT40_5], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_4], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_1_3_9_11_17_19], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_0_8_16], 0)
+ );
+
+ /* 6 (LSB), 7, 12, 13 (MSB) */
+ REG_WRITE(ah, 0xa3dc,
+ POW_SM(pPwrArray[ALL_TARGET_HT40_13], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_12], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_7], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_6], 0)
+ );
+
+ /* 14 (LSB), 15, 20, 21 */
+ REG_WRITE(ah, 0xa3ec,
+ POW_SM(pPwrArray[ALL_TARGET_HT40_21], 24) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_20], 16) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_15], 8) |
+ POW_SM(pPwrArray[ALL_TARGET_HT40_14], 0)
+ );
+
+ return 0;
+#undef POW_SM
+}
+
+static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq)
+{
+ u8 targetPowerValT2[ar9300RateSize];
+ /* XXX: hard code for now, need to get from eeprom struct */
+ u8 ht40PowerIncForPdadc = 0;
+ bool is2GHz = false;
+ unsigned int i = 0;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (freq < 4000)
+ is2GHz = true;
+
+ targetPowerValT2[ALL_TARGET_LEGACY_6_24] =
+ ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_6_24, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_LEGACY_36] =
+ ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_36, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_LEGACY_48] =
+ ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_48, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_LEGACY_54] =
+ ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_54, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_LEGACY_1L_5L] =
+ ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_1L_5L,
+ freq);
+ targetPowerValT2[ALL_TARGET_LEGACY_5S] =
+ ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_5S, freq);
+ targetPowerValT2[ALL_TARGET_LEGACY_11L] =
+ ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11L, freq);
+ targetPowerValT2[ALL_TARGET_LEGACY_11S] =
+ ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11S, freq);
+ targetPowerValT2[ALL_TARGET_HT20_0_8_16] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_1_3_9_11_17_19] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19,
+ freq, is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_4] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_4, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_5] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_5, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_6] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_6, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_7] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_7, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_12] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_12, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_13] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_13, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_14] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_14, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_15] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_15, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_20] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_20, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_21] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_21, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_22] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_22, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT20_23] =
+ ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_23, freq,
+ is2GHz);
+ targetPowerValT2[ALL_TARGET_HT40_0_8_16] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_1_3_9_11_17_19] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19,
+ freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_4] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_4, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_5] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_5, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_6] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_6, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_7] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_7, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_12] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_12, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_13] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_13, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_14] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_14, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_15] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_15, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_20] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_20, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_21] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_21, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_22] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_22, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+ targetPowerValT2[ALL_TARGET_HT40_23] =
+ ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq,
+ is2GHz) + ht40PowerIncForPdadc;
+
+ while (i < ar9300RateSize) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
+ i++;
+ }
+
+ /* Write target power array to registers */
+ ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
+}
+
+static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
+ int mode,
+ int ipier,
+ int ichain,
+ int *pfrequency,
+ int *pcorrection,
+ int *ptemperature, int *pvoltage)
+{
+ u8 *pCalPier;
+ struct ar9300_cal_data_per_freq_op_loop *pCalPierStruct;
+ int is2GHz;
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (ichain >= AR9300_MAX_CHAINS) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Invalid chain index, must be less than %d\n",
+ AR9300_MAX_CHAINS);
+ return -1;
+ }
+
+ if (mode) { /* 5GHz */
+ if (ipier >= AR9300_NUM_5G_CAL_PIERS) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Invalid 5GHz cal pier index, must "
+ "be less than %d\n",
+ AR9300_NUM_5G_CAL_PIERS);
+ return -1;
+ }
+ pCalPier = &(eep->calFreqPier5G[ipier]);
+ pCalPierStruct = &(eep->calPierData5G[ichain][ipier]);
+ is2GHz = 0;
+ } else {
+ if (ipier >= AR9300_NUM_2G_CAL_PIERS) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "Invalid 2GHz cal pier index, must "
+ "be less than %d\n", AR9300_NUM_2G_CAL_PIERS);
+ return -1;
+ }
+
+ pCalPier = &(eep->calFreqPier2G[ipier]);
+ pCalPierStruct = &(eep->calPierData2G[ichain][ipier]);
+ is2GHz = 1;
+ }
+
+ *pfrequency = FBIN2FREQ(*pCalPier, is2GHz);
+ *pcorrection = pCalPierStruct->refPower;
+ *ptemperature = pCalPierStruct->tempMeas;
+ *pvoltage = pCalPierStruct->voltMeas;
+
+ return 0;
+}
+
+static int ar9003_hw_power_control_override(struct ath_hw *ah,
+ int frequency,
+ int *correction,
+ int *voltage, int *temperature)
+{
+ int tempSlope = 0;
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+ REG_RMW(ah, AR_PHY_TPC_11_B0,
+ (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+ AR_PHY_TPC_OLPC_GAIN_DELTA);
+ REG_RMW(ah, AR_PHY_TPC_11_B1,
+ (correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+ AR_PHY_TPC_OLPC_GAIN_DELTA);
+ REG_RMW(ah, AR_PHY_TPC_11_B2,
+ (correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+ AR_PHY_TPC_OLPC_GAIN_DELTA);
+
+ /* enable open loop power control on chip */
+ REG_RMW(ah, AR_PHY_TPC_6_B0,
+ (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+ AR_PHY_TPC_6_ERROR_EST_MODE);
+ REG_RMW(ah, AR_PHY_TPC_6_B1,
+ (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+ AR_PHY_TPC_6_ERROR_EST_MODE);
+ REG_RMW(ah, AR_PHY_TPC_6_B2,
+ (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+ AR_PHY_TPC_6_ERROR_EST_MODE);
+
+ /*
+ * enable temperature compensation
+ * Need to use register names
+ */
+ if (frequency < 4000)
+ tempSlope = eep->modalHeader2G.tempSlope;
+ else
+ tempSlope = eep->modalHeader5G.tempSlope;
+
+ REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope);
+ REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE,
+ temperature[0]);
+
+ return 0;
+}
+
+/* Apply the recorded correction values. */
+static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
+{
+ int ichain, ipier, npier;
+ int mode;
+ int lfrequency[AR9300_MAX_CHAINS],
+ lcorrection[AR9300_MAX_CHAINS],
+ ltemperature[AR9300_MAX_CHAINS], lvoltage[AR9300_MAX_CHAINS];
+ int hfrequency[AR9300_MAX_CHAINS],
+ hcorrection[AR9300_MAX_CHAINS],
+ htemperature[AR9300_MAX_CHAINS], hvoltage[AR9300_MAX_CHAINS];
+ int fdiff;
+ int correction[AR9300_MAX_CHAINS],
+ voltage[AR9300_MAX_CHAINS], temperature[AR9300_MAX_CHAINS];
+ int pfrequency, pcorrection, ptemperature, pvoltage;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ mode = (frequency >= 4000);
+ if (mode)
+ npier = AR9300_NUM_5G_CAL_PIERS;
+ else
+ npier = AR9300_NUM_2G_CAL_PIERS;
+
+ for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
+ lfrequency[ichain] = 0;
+ hfrequency[ichain] = 100000;
+ }
+ /* identify best lower and higher frequency calibration measurement */
+ for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
+ for (ipier = 0; ipier < npier; ipier++) {
+ if (!ar9003_hw_cal_pier_get(ah, mode, ipier, ichain,
+ &pfrequency, &pcorrection,
+ &ptemperature, &pvoltage)) {
+ fdiff = frequency - pfrequency;
+
+ /*
+ * this measurement is higher than
+ * our desired frequency
+ */
+ if (fdiff <= 0) {
+ if (hfrequency[ichain] <= 0 ||
+ hfrequency[ichain] >= 100000 ||
+ fdiff >
+ (frequency - hfrequency[ichain])) {
+ /*
+ * new best higher
+ * frequency measurement
+ */
+ hfrequency[ichain] = pfrequency;
+ hcorrection[ichain] =
+ pcorrection;
+ htemperature[ichain] =
+ ptemperature;
+ hvoltage[ichain] = pvoltage;
+ }
+ }
+ if (fdiff >= 0) {
+ if (lfrequency[ichain] <= 0
+ || fdiff <
+ (frequency - lfrequency[ichain])) {
+ /*
+ * new best lower
+ * frequency measurement
+ */
+ lfrequency[ichain] = pfrequency;
+ lcorrection[ichain] =
+ pcorrection;
+ ltemperature[ichain] =
+ ptemperature;
+ lvoltage[ichain] = pvoltage;
+ }
+ }
+ }
+ }
+ }
+
+ /* interpolate */
+ for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "ch=%d f=%d low=%d %d h=%d %d\n",
+ ichain, frequency, lfrequency[ichain],
+ lcorrection[ichain], hfrequency[ichain],
+ hcorrection[ichain]);
+ /* they're the same, so just pick one */
+ if (hfrequency[ichain] == lfrequency[ichain]) {
+ correction[ichain] = lcorrection[ichain];
+ voltage[ichain] = lvoltage[ichain];
+ temperature[ichain] = ltemperature[ichain];
+ }
+ /* the low frequency is good */
+ else if (frequency - lfrequency[ichain] < 1000) {
+ /* so is the high frequency, interpolate */
+ if (hfrequency[ichain] - frequency < 1000) {
+
+ correction[ichain] = lcorrection[ichain] +
+ (((frequency - lfrequency[ichain]) *
+ (hcorrection[ichain] -
+ lcorrection[ichain])) /
+ (hfrequency[ichain] - lfrequency[ichain]));
+
+ temperature[ichain] = ltemperature[ichain] +
+ (((frequency - lfrequency[ichain]) *
+ (htemperature[ichain] -
+ ltemperature[ichain])) /
+ (hfrequency[ichain] - lfrequency[ichain]));
+
+ voltage[ichain] =
+ lvoltage[ichain] +
+ (((frequency -
+ lfrequency[ichain]) * (hvoltage[ichain] -
+ lvoltage[ichain]))
+ / (hfrequency[ichain] -
+ lfrequency[ichain]));
+ }
+ /* only low is good, use it */
+ else {
+ correction[ichain] = lcorrection[ichain];
+ temperature[ichain] = ltemperature[ichain];
+ voltage[ichain] = lvoltage[ichain];
+ }
+ }
+ /* only high is good, use it */
+ else if (hfrequency[ichain] - frequency < 1000) {
+ correction[ichain] = hcorrection[ichain];
+ temperature[ichain] = htemperature[ichain];
+ voltage[ichain] = hvoltage[ichain];
+ } else { /* nothing is good, presume 0???? */
+ correction[ichain] = 0;
+ temperature[ichain] = 0;
+ voltage[ichain] = 0;
+ }
+ }
+
+ ar9003_hw_power_control_override(ah, frequency, correction, voltage,
+ temperature);
+
+ ath_print(common, ATH_DBG_EEPROM,
+ "for frequency=%d, calibration correction = %d %d %d\n",
+ frequency, correction[0], correction[1], correction[2]);
+
+ return 0;
+}
+
+static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
+ struct ath9k_channel *chan, u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u8 powerLimit)
+{
+ ar9003_hw_set_target_power_eeprom(ah, chan->channel);
+ ar9003_hw_calibration_apply(ah, chan->channel);
+}
+
+static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah,
+ u16 i, bool is2GHz)
+{
+ return AR_NO_SPUR;
+}
+
+const struct eeprom_ops eep_ar9300_ops = {
+ .check_eeprom = ath9k_hw_ar9300_check_eeprom,
+ .get_eeprom = ath9k_hw_ar9300_get_eeprom,
+ .fill_eeprom = ath9k_hw_ar9300_fill_eeprom,
+ .get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver,
+ .get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev,
+ .get_num_ant_config = ath9k_hw_ar9300_get_num_ant_config,
+ .get_eeprom_antenna_cfg = ath9k_hw_ar9300_get_eeprom_antenna_cfg,
+ .set_board_values = ath9k_hw_ar9300_set_board_values,
+ .set_addac = ath9k_hw_ar9300_set_addac,
+ .set_txpower = ath9k_hw_ar9300_set_txpower,
+ .get_spur_channel = ath9k_hw_ar9300_get_spur_channel
+};
projects / linux-beck.git / commitdiff