S: D-64295
S: Germany
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
N: Andi Kleen
E: andi@firstfloor.org
U: http://www.halobates.de
This attribute has no effect on system-wide suspend/resume and
hibernation.
+
+What: /sys/devices/.../power/pm_qos_no_power_off
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_no_power_off attribute
+ is used for manipulating the PM QoS "no power off" flag. If
+ set, this flag indicates to the kernel that power should not
+ be removed entirely from the device.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
+
+What: /sys/devices/.../power/pm_qos_remote_wakeup
+Date: September 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+ is used for manipulating the PM QoS "remote wakeup required"
+ flag. If set, this flag indicates to the kernel that the
+ device is a source of user events that have to be signaled from
+ its low-power states.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
--- /dev/null
+Whatt: /sys/devices/.../sun
+Date: October 2012
+Contact: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+ The file contains a Slot-unique ID which provided by the _SUN
+ method in the ACPI namespace. The value is written in Advanced
+ Configuration and Power Interface Specification as follows:
+
+ "The _SUN value is required to be unique among the slots of
+ the same type. It is also recommended that this number match
+ the slot number printed on the physical slot whenever possible."
+
+ So reading the sysfs file, we can identify a physical position
+ of the slot in the system.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
Following cgroups' swappiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
--- /dev/null
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+ increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+ unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+ <...>
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+
+ <...>
+
+ cpufreq_tbl = < 166000
+ 200000
+ 250000
+ 300000
+ 400000
+ 500000
+ 600000 >;
+ };
+
+ <...>
+
+};
MDC, MDIO.
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
Example:
-mdio {
+aliases {
+ mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
2 Modifying System Parameters
3 Per-Process Parameters
- 3.1 /proc/<pid>/oom_score_adj - Adjust the oom-killer
+ 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
score
3.2 /proc/<pid>/oom_score - Display current oom-killer score
3.3 /proc/<pid>/io - Display the IO accounting fields
CHAPTER 3: PER-PROCESS PARAMETERS
------------------------------------------------------------------------------
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
--------------------------------------------------------------------------------
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
process gets killed in out of memory conditions.
The badness heuristic assigns a value to each candidate task ranging from 0
equivalent to discounting 50% of the task's allowed memory from being considered
as scoring against the task.
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score. Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task. Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
requires CAP_SYS_RESOURCE.
-------------------------------------------------------------
This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
3.3 /proc/<pid>/io - Display the IO accounting fields
-------------------------------------------------------
This requests that the NIC receive all possible frames, including errored
frames (such as bad FCS, etc). This can be helpful when sniffing a link with
bad packets on it. Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.
# ip link delete vxlan0
3. Show vxlan info
- # ip -d show vxlan0
+ # ip -d link show vxlan0
It is possible to create, destroy and display the vxlan
forwarding table using the new bridge command.
# bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
2. Delete forwarding table entry
- # bridge fdb delete 00:17:42:8a:b4:05
+ # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
3. Show forwarding table
# bridge fdb show dev vxlan0
From kernel mode the use of this interface is the following:
-int dev_pm_qos_add_request(device, handle, value):
+int dev_pm_qos_add_request(device, handle, type, value):
Will insert an element into the list for that identified device with the
target value. Upon change to this list the new target is recomputed and any
registered notifiers are called only if the target value is now different.
F: arch/x86/include/asm/geode.h
AMD IOMMU (AMD-VI)
-M: Joerg Roedel <joerg.roedel@amd.com>
+M: Joerg Roedel <joro@8bytes.org>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S: Supported
+S: Maintained
F: drivers/iommu/amd_iommu*.[ch]
F: include/linux/amd-iommu.h
AMD MICROCODE UPDATE SUPPORT
-M: Andreas Herrmann <andreas.herrmann3@amd.com>
+M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: amd64-microcode@amd64.org
-S: Supported
+S: Maintained
F: arch/x86/kernel/microcode_amd.c
AMS (Apple Motion Sensor) DRIVER
F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h
+ARM/IGEP MACHINE SUPPORT
+M: Enric Balletbo i Serra <eballetbo@gmail.com>
+M: Javier Martinez Canillas <javier@dowhile0.org>
+L: linux-omap@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-omap2/board-igep0020.c
+
ARM/INCOME PXA270 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
EDAC-AMD64
M: Doug Thompson <dougthompson@xmission.com>
-M: Borislav Petkov <borislav.petkov@amd.com>
+M: Borislav Petkov <bp@alien8.de>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
-S: Supported
+S: Maintained
F: drivers/edac/amd64_edac*
EDAC-E752X
F: drivers/net/hyperv/
F: drivers/staging/hv/
+I2C OVER PARALLEL PORT
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-parport
+F: Documentation/i2c/busses/i2c-parport-light
+F: drivers/i2c/busses/i2c-parport.c
+F: drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-ali1535
+F: Documentation/i2c/busses/i2c-ali1563
+F: Documentation/i2c/busses/i2c-ali15x3
+F: Documentation/i2c/busses/i2c-amd756
+F: Documentation/i2c/busses/i2c-amd8111
+F: Documentation/i2c/busses/i2c-i801
+F: Documentation/i2c/busses/i2c-nforce2
+F: Documentation/i2c/busses/i2c-piix4
+F: Documentation/i2c/busses/i2c-sis5595
+F: Documentation/i2c/busses/i2c-sis630
+F: Documentation/i2c/busses/i2c-sis96x
+F: Documentation/i2c/busses/i2c-via
+F: Documentation/i2c/busses/i2c-viapro
+F: drivers/i2c/busses/i2c-ali1535.c
+F: drivers/i2c/busses/i2c-ali1563.c
+F: drivers/i2c/busses/i2c-ali15x3.c
+F: drivers/i2c/busses/i2c-amd756.c
+F: drivers/i2c/busses/i2c-amd756-s4882.c
+F: drivers/i2c/busses/i2c-amd8111.c
+F: drivers/i2c/busses/i2c-i801.c
+F: drivers/i2c/busses/i2c-isch.c
+F: drivers/i2c/busses/i2c-nforce2.c
+F: drivers/i2c/busses/i2c-nforce2-s4985.c
+F: drivers/i2c/busses/i2c-piix4.c
+F: drivers/i2c/busses/i2c-sis5595.c
+F: drivers/i2c/busses/i2c-sis630.c
+F: drivers/i2c/busses/i2c-sis96x.c
+F: drivers/i2c/busses/i2c-via.c
+F: drivers/i2c/busses/i2c-viapro.c
+
I2C/SMBUS STUB DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
F: drivers/i2c/busses/i2c-stub.c
I2C SUBSYSTEM
-M: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M: Wolfram Sang <w.sang@pengutronix.de>
M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
F: include/linux/i2c.h
F: include/linux/i2c-*.h
+I2C-TAOS-EVM DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-taos-evm
+F: drivers/i2c/busses/i2c-taos-evm.c
+
I2C-TINY-USB DRIVER
M: Till Harbaum <till@harbaum.org>
L: linux-i2c@vger.kernel.org
F: drivers/platform/x86/ideapad-laptop.c
IDE/ATAPI DRIVERS
-M: Borislav Petkov <petkovbb@gmail.com>
+M: Borislav Petkov <bp@alien8.de>
L: linux-ide@vger.kernel.org
S: Maintained
F: Documentation/cdrom/ide-cd
F: include/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-M: Avi Kivity <avi@redhat.com>
M: Marcelo Tosatti <mtosatti@redhat.com>
+M: Gleb Natapov <gleb@redhat.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
F: sound/drivers/opl4/
OPROFILE
-M: Robert Richter <robert.richter@amd.com>
+M: Robert Richter <rric@kernel.org>
L: oprofile-list@lists.sf.net
S: Maintained
F: arch/*/include/asm/oprofile*.h
S: Maintained
F: arch/xtensa/
+THERMAL
+M: Zhang Rui <rui.zhang@intel.com>
+L: linux-pm@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S: Supported
+F: drivers/thermal/
+F: include/linux/thermal.h
+
THINKPAD ACPI EXTRAS DRIVER
M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
S: Maintained
F: drivers/net/ethernet/via/via-rhine.c
-VIAPRO SMBUS DRIVER
-M: Jean Delvare <khali@linux-fr.org>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-viapro
-F: drivers/i2c/busses/i2c-viapro.c
-
VIA SD/MMC CARD CONTROLLER DRIVER
M: Bruce Chang <brucechang@via.com.tw>
M: Harald Welte <HaraldWelte@viatech.com>
X86 MCE INFRASTRUCTURE
M: Tony Luck <tony.luck@intel.com>
-M: Borislav Petkov <bp@amd64.org>
+M: Borislav Petkov <bp@alien8.de>
L: linux-edac@vger.kernel.org
S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
NAME = Terrified Chipmunk
# *DOCUMENTATION*
* unhappy with OSF UFS. [CHECKME]
*/
static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
}
static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
}
static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
{
struct procfs_args tmp;
config PLAT_SPEAR
bool "ST SPEAr"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
$(obj)/xipImage: vmlinux FORCE
$(call if_changed,objcopy)
- $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+ @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
$(obj)/Image $(obj)/zImage: FORCE
@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
- $(kecho) ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
- $(kecho) ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
endif
$(obj)/uImage: $(obj)/zImage FORCE
@$(check_for_multiple_loadaddr)
$(call if_changed,uimage)
- $(kecho) ' Image $@ is ready'
+ @$(kecho) ' Image $@ is ready'
$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
$(Q)$(MAKE) $(build)=$(obj)/bootp $@
$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
$(call if_changed,objcopy)
- $(kecho) ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
PHONY += initrd FORCE
initrd:
pinmux: pinmux {
compatible = "nvidia,tegra30-pinmux";
- reg = <0x70000868 0xd0 /* Pad control registers */
- 0x70003000 0x3e0>; /* Mux registers */
+ reg = <0x70000868 0xd4 /* Pad control registers */
+ 0x70003000 0x3e4>; /* Mux registers */
};
serial@70006000 {
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
break;
case VPBE_ENC_CUSTOM_TIMINGS:
if (pclock <= 27000000) {
- v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
- DM644X_VPSS_DACCLKEN;
+ v |= DM644X_VPSS_DACCLKEN;
writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
} else {
/*
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+ if (samsung_rev() == EXYNOS4210_REV_0)
+ exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
+#define EXYNOS4_PA_S_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
hignbank_set_pwr_soft_reset();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
- cpu_do_idle();
+ while (1)
+ cpu_do_idle();
}
clk = clk_register(dev, &gate->hw);
if (IS_ERR(clk))
- kfree(clk);
+ kfree(gate);
return clk;
}
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
-#define MX25_H1_PM_BIT (1 << 8)
+#define MX25_H1_PM_BIT (1 << 16)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
-#define MX35_H1_PM_BIT (1 << 8)
+#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
} else
return;
+ /* Make sure that the GPIO pins are muxed correctly */
+ omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
.clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS,
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain l3_dss_44xx_clkdm = {
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
+ /*
+ * If a board defines get_pendown_state() function, request the pendown
+ * GPIO and set the GPIO debounce time.
+ * If a board does not define the get_pendown_state() function, then
+ * the ads7846 driver will setup the pendown GPIO itself.
+ */
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+ gpio_export(gpio_pendown, 0);
+ }
spi_bi->bus_num = bus_num;
spi_bi->irq = gpio_to_irq(gpio_pendown);
+ ads7846_config.gpio_pendown = gpio_pendown;
+
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
+ board_pdata->gpio_pendown_debounce = gpio_debounce;
spi_bi->platform_data = board_pdata;
- if (board_pdata->get_pendown_state)
- gpio_export(gpio_pendown, 0);
- } else {
- ads7846_config.gpio_pendown = gpio_pendown;
}
- if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
- gpio_free(gpio_pendown);
-
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#else
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
static inline void omap_init_vout(void) {}
#endif
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+ int cnt = 0;
+
+ while (ocp2scp_dev->drv_name != NULL) {
+ cnt++;
+ ocp2scp_dev++;
+ }
+
+ return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ int bus_id = -1, dev_cnt = 0, i;
+ struct omap_ocp2scp_dev *ocp2scp_dev;
+ const char *oh_name, *name;
+ struct omap_ocp2scp_platform_data *pdata;
+
+ if (!cpu_is_omap44xx())
+ return;
+
+ oh_name = "ocp2scp_usb_phy";
+ name = "omap-ocp2scp";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+ oh_name);
+ return;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+ return;
+ }
+
+ ocp2scp_dev = oh->dev_attr;
+ dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+ if (!dev_cnt) {
+ pr_err("%s: No devices connected to ocp2scp\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+ * dev_cnt, GFP_KERNEL);
+ if (!pdata->devices) {
+ pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+ pdata->devices[i] = ocp2scp_dev;
+
+ pdata->dev_cnt = dev_cnt;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+ 0, false);
+ if (IS_ERR(pdev)) {
+ pr_err("Could not build omap_device for %s %s\n",
+ name, oh_name);
+ kfree(pdata->devices);
+ kfree(pdata);
+ return;
+ }
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
omap_init_sham();
omap_init_aes();
omap_init_vout();
+ omap_init_ocp2scp();
return 0;
}
return 0;
}
+/**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete. This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds. Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_class_sysconfig *sysc;
+ u32 softrst_mask;
+ int c = 0;
+
+ sysc = oh->class->sysc;
+
+ if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+ omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+ softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+ omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+ & softrst_mask),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ }
+
+ return c;
+}
+
/**
* _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
* @oh: struct omap_hwmod *
if (!oh->class->sysc)
return;
+ /*
+ * Wait until reset has completed, this is needed as the IP
+ * block is reset automatically by hardware in some cases
+ * (off-mode for example), and the drivers require the
+ * IP to be ready when they access it
+ */
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _enable_optional_clocks(oh);
+ _wait_softreset_complete(oh);
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _disable_optional_clocks(oh);
+
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
*/
static int _ocp_softreset(struct omap_hwmod *oh)
{
- u32 v, softrst_mask;
+ u32 v;
int c = 0;
int ret = 0;
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
- if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
- omap_test_timeout((omap_hwmod_read(oh,
- oh->class->sysc->syss_offs)
- & SYSS_RESETDONE_MASK),
- MAX_MODULE_SOFTRESET_WAIT, c);
- else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
- softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
- omap_test_timeout(!(omap_hwmod_read(oh,
- oh->class->sysc->sysc_offs)
- & softrst_mask),
- MAX_MODULE_SOFTRESET_WAIT, c);
- }
-
+ c = _wait_softreset_complete(oh);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
oh->name, MAX_MODULE_SOFTRESET_WAIT);
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return -EINVAL;
+ if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+ return -EPERM;
+
if (oh->rst_lines_cnt == 0) {
r = _enable(oh);
if (r) {
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
+#include <linux/platform_data/omap_ocp2scp.h>
#include <plat/omap_hwmod.h>
#include <plat/i2c.h>
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
.clkdm_name = "abe_clkdm",
+ /*
+ * It's suspected that the McPDM requires an off-chip main
+ * functional clock, controlled via I2C. This IP block is
+ * currently reset very early during boot, before I2C is
+ * available, so it doesn't seem that we have any choice in
+ * the kernel other than to avoid resetting it.
+ */
+ .flags = HWMOD_EXT_OPT_MAIN_CLK,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
.sysc = &omap44xx_ocp2scp_sysc,
};
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+ {
+ .name = "usb_phy",
+ .start = 0x4a0ad080,
+ .end = 0x4a0ae000,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* XXX: Remove this once control module driver is in place */
+ .name = "ctrl_dev",
+ .start = 0x4a002300,
+ .end = 0x4a002303,
+ .flags = IORESOURCE_MEM,
+ },
+ { }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+ {
+ .drv_name = "omap-usb2",
+ .res = omap44xx_usb_phy_and_pll_addrs,
+ },
+ { }
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
.modulemode = MODULEMODE_HWCTRL,
},
},
+ .dev_attr = ocp2scp_dev_attr,
};
/*
{
/* PMIC part*/
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
/* Register additional devices on i2c1 bus if needed */
};
static struct regulator_consumer_supply omap4_vdd1_supply[] = {
- REGULATOR_SUPPLY("vcc", "mpu.0"),
+ REGULATOR_SUPPLY("vcc", "cpu0"),
};
static struct regulator_consumer_supply omap4_vdd2_supply[] = {
if (initialized) {
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
- pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+ pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
__func__, voltdm->name, i2c_high_speed);
return;
}
#include <linux/mfd/asic3.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/gpio-regulator.h>
*/
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 1,
+ .pwm_id = -1, /* Superseded by pwm_lookup */
.max_brightness = 200,
.dft_brightness = 100,
.pwm_period_ns = 30923,
},
};
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL),
+};
+
/*
* USB "Transceiver"
*/
pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
+ pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
}
-static unsigned long gpio18_config[] = {
- GPIO18_RDY,
- GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
static void spitz_presuspend(void)
{
PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
- pxa2xx_mfp_config(&gpio18_config[0], 1);
+ pxa2xx_mfp_config(&gpio18_config, 1);
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
gpio_free(18);
static void spitz_postsuspend(void)
{
- pxa2xx_mfp_config(&gpio18_config[1], 1);
}
static int spitz_should_wakeup(unsigned int resume_on_alarm)
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <mach/irqs.h>
#include <plat/i2c.h>
+#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#define OMAP_I2C_SIZE 0x3f
#ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
pdata->flags = dev_attr->flags;
+ /*
+ * When waiting for completion of a i2c transfer, we need to
+ * set a wake up latency constraint for the MPU. This is to
+ * ensure quick enough wakeup from idle, when transfer
+ * completes.
+ * Only omap3 has support for constraints
+ */
+ if (cpu_is_omap34xx())
+ pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
NULL, 0, 0);
* in order to complete the reset. Optional clocks will be disabled
* again after the reset.
* HWMOD_16BIT_REG: Module has 16bit registers
+ * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ * this IP block comes from an off-chip source and is not always
+ * enabled. This prevents the hwmod code from being able to
+ * enable and reset the IP block early. XXX Eventually it should
+ * be possible to query the clock framework for this information.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_NO_IDLEST (1 << 6)
#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
#define HWMOD_16BIT_REG (1 << 8)
+#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
/*
* omap_hwmod._int_flags definitions
#
include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
- $(kecho) ' Generating $@'
+ @$(kecho) ' Generating $@'
@mkdir -p $(dir $@)
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
extern void __iounmap(volatile void __iomem *addr);
#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
-#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_NG (_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN (_AT(pmdval_t, 1) << 54)
/*
* AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
#define PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
#define PTE_AF (_AT(pteval_t, 1) << 10) /* Access Flag */
#define PTE_NG (_AT(pteval_t, 1) << 11) /* nG */
-#define PTE_XN (_AT(pteval_t, 1) << 54) /* XN */
+#define PTE_PXN (_AT(pteval_t, 1) << 53) /* Privileged XN */
+#define PTE_UXN (_AT(pteval_t, 1) << 54) /* User XN */
/*
* AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
-#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
-#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
-#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
-#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_DIRTY)
-
-#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
-#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
-#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
-#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
+
+#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
#endif /* __ASSEMBLY__ */
#define pte_young(pte) (pte_val(pte) & PTE_AF)
#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL)
#define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY))
-#define pte_exec(pte) (!(pte_val(pte) & PTE_XN))
+#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
#define pte_present_exec_user(pte) \
- ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+ ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
(PTE_VALID | PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+ const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}
#define _ASM_IA64_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_INTEL_IOMMU
void *iommu; /* hook for IOMMU specific extension */
#endif
ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
IOSAPIC_LEVEL);
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
void acpi_unregister_gsi(u32 gsi)
{
iosapic_unregister_intr(gsi);
}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
high_memory = __va(max_low_pfn * PAGE_SIZE);
- reset_zone_present_pages();
for_each_online_pgdat(pgdat)
if (pgdat->bdata->node_bootmem_map)
totalram_pages += free_all_bootmem_node(pgdat);
static inline void sigaddset(sigset_t *set, int _sig)
{
asm ("bfset %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
static inline void sigdelset(sigset_t *set, int _sig)
{
asm ("bfclr %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
int ret;
asm ("bfextu %1{%2,#1},%0"
: "=d" (ret)
- : "od" (*set), "id" ((_sig-1) ^ 31)
+ : "o" (*set), "id" ((_sig-1) ^ 31)
: "cc");
return ret;
}
* measurement, and debugging facilities.
*/
+#include <linux/irqflags.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-l2c.h>
#include <asm/octeon/cvmx-spinlock.h>
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/irqflags.h>
#include <asm/bcache.h>
#endif
#include <linux/compiler.h>
-#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/byteorder.h> /* sigh ... */
#define smp_mb__before_clear_bit() smp_mb__before_llsc()
#define smp_mb__after_clear_bit() smp_llsc_mb()
+
+/*
+ * These are the "slower" versions of the functions and are in bitops.c.
+ * These functions call raw_local_irq_{save,restore}().
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
+int __mips_test_and_set_bit(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_clear_bit(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_change_bit(unsigned long nr,
+ volatile unsigned long *addr);
+
+
/*
* set_bit - Atomically set a bit in memory
* @nr: the bit to set
static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
{
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long temp;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
: "=&r" (temp), "+m" (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_set_bit(nr, addr);
}
/*
static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
{
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long temp;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
: "=&r" (temp), "+m" (*m)
: "ir" (~(1UL << bit)));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a &= ~mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_clear_bit(nr, addr);
}
/*
*/
static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
: "=&r" (temp), "+m" (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a ^= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_change_bit(nr, addr);
}
/*
static inline int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_set_bit(nr, addr);
smp_llsc_mb();
static inline int test_and_set_bit_lock(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_set_bit_lock(nr, addr);
smp_llsc_mb();
static inline int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a &= ~mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_clear_bit(nr, addr);
smp_llsc_mb();
static inline int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a ^= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_change_bit(nr, addr);
smp_llsc_mb();
static inline int is_compat_task(void)
{
- return test_thread_flag(TIF_32BIT);
+ return test_thread_flag(TIF_32BIT_ADDR);
}
#endif /* _ASM_COMPAT_H */
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/irqflags.h>
#include <asm/addrspace.h>
#include <asm/bug.h>
#include <linux/compiler.h>
#include <asm/hazards.h>
-__asm__(
- " .macro arch_local_irq_enable \n"
- " .set push \n"
- " .set reorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
- " ori $1, 0x400 \n"
- " xori $1, 0x400 \n"
- " mtc0 $1, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " ei \n"
-#else
- " mfc0 $1,$12 \n"
- " ori $1,0x1f \n"
- " xori $1,0x1e \n"
- " mtc0 $1,$12 \n"
-#endif
- " irq_enable_hazard \n"
- " .set pop \n"
- " .endm");
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
-extern void smtc_ipi_replay(void);
-
-static inline void arch_local_irq_enable(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC kernel needs to do a software replay of queued
- * IPIs, at the cost of call overhead on each local_irq_enable()
- */
- smtc_ipi_replay();
-#endif
- __asm__ __volatile__(
- "arch_local_irq_enable"
- : /* no outputs */
- : /* no inputs */
- : "memory");
-}
-
-
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
__asm__(
" .macro arch_local_irq_disable\n"
" .set push \n"
" .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 $1, $2, 1 \n"
- " ori $1, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
" di \n"
-#else
- " mfc0 $1,$12 \n"
- " ori $1,0x1f \n"
- " xori $1,0x1f \n"
- " .set noreorder \n"
- " mtc0 $1,$12 \n"
-#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
: "memory");
}
-__asm__(
- " .macro arch_local_save_flags flags \n"
- " .set push \n"
- " .set reorder \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 \\flags, $2, 1 \n"
-#else
- " mfc0 \\flags, $12 \n"
-#endif
- " .set pop \n"
- " .endm \n");
-
-static inline unsigned long arch_local_save_flags(void)
-{
- unsigned long flags;
- asm volatile("arch_local_save_flags %0" : "=r" (flags));
- return flags;
-}
__asm__(
" .macro arch_local_irq_save result \n"
" .set push \n"
" .set reorder \n"
" .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 \\result, $2, 1 \n"
- " ori $1, \\result, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
- " andi \\result, \\result, 0x400 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
" di \\result \n"
" andi \\result, 1 \n"
-#else
- " mfc0 \\result, $12 \n"
- " ori $1, \\result, 0x1f \n"
- " xori $1, 0x1f \n"
- " .set noreorder \n"
- " mtc0 $1, $12 \n"
-#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
return flags;
}
+
__asm__(
" .macro arch_local_irq_restore flags \n"
" .set push \n"
" .set noreorder \n"
" .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- "mfc0 $1, $2, 1 \n"
- "andi \\flags, 0x400 \n"
- "ori $1, 0x400 \n"
- "xori $1, 0x400 \n"
- "or \\flags, $1 \n"
- "mtc0 \\flags, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#if defined(CONFIG_IRQ_CPU)
/*
* Slow, but doesn't suffer from a relatively unlikely race
* condition we're having since days 1.
*/
" beqz \\flags, 1f \n"
- " di \n"
+ " di \n"
" ei \n"
"1: \n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#else
/*
* Fast, dangerous. Life is fun, life is good.
*/
" mfc0 $1, $12 \n"
" ins $1, \\flags, 0, 1 \n"
" mtc0 $1, $12 \n"
-#else
- " mfc0 $1, $12 \n"
- " andi \\flags, 1 \n"
- " ori $1, 0x1f \n"
- " xori $1, 0x1f \n"
- " or \\flags, $1 \n"
- " mtc0 \\flags, $12 \n"
#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
-
static inline void arch_local_irq_restore(unsigned long flags)
{
unsigned long __tmp1;
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC kernel needs to do a software replay of queued
- * IPIs, at the cost of branch and call overhead on each
- * local_irq_restore()
- */
- if (unlikely(!(flags & 0x0400)))
- smtc_ipi_replay();
-#endif
-
__asm__ __volatile__(
"arch_local_irq_restore\t%0"
: "=r" (__tmp1)
: "0" (flags)
: "memory");
}
+#else
+/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
+void arch_local_irq_disable(void);
+unsigned long arch_local_irq_save(void);
+void arch_local_irq_restore(unsigned long flags);
+void __arch_local_irq_restore(unsigned long flags);
+#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
+
+
+__asm__(
+ " .macro arch_local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
+ " ori $1, 0x400 \n"
+ " xori $1, 0x400 \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
+
+extern void smtc_ipi_replay(void);
+
+static inline void arch_local_irq_enable(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of call overhead on each local_irq_enable()
+ */
+ smtc_ipi_replay();
+#endif
+ __asm__ __volatile__(
+ "arch_local_irq_enable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+
+__asm__(
+ " .macro arch_local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\flags, $2, 1 \n"
+#else
+ " mfc0 \\flags, $12 \n"
+#endif
+ " .set pop \n"
+ " .endm \n");
+
+static inline unsigned long arch_local_save_flags(void)
+{
+ unsigned long flags;
+ asm volatile("arch_local_save_flags %0" : "=r" (flags));
+ return flags;
+}
+
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
#endif
}
-#endif
+#endif /* #ifndef __ASSEMBLY__ */
/*
* Do the CPU's IRQ-state tracing from assembly code.
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
-#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-#endif /* CONFIG_MIPS32_O32 */
-
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
void __init add_memory_region(phys_t start, phys_t size, long type)
{
int x = boot_mem_map.nr_map;
- struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+ int i;
/* Sanity check */
if (start + size < start) {
}
/*
- * Try to merge with previous entry if any. This is far less than
- * perfect but is sufficient for most real world cases.
+ * Try to merge with existing entry, if any.
*/
- if (x && prev->addr + prev->size == start && prev->type == type) {
- prev->size += size;
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+ unsigned long top;
+
+ if (entry->type != type)
+ continue;
+
+ if (start + size < entry->addr)
+ continue; /* no overlap */
+
+ if (entry->addr + entry->size < start)
+ continue; /* no overlap */
+
+ top = max(entry->addr + entry->size, start + size);
+ entry->addr = min(entry->addr, start);
+ entry->size = top - entry->addr;
+
return;
}
- if (x == BOOT_MEM_MAP_MAX) {
+ if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
pr_err("Ooops! Too many entries in the memory map!\n");
return;
}
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o delay.o memcpy.o memset.o \
- strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ mips-atomic.o strlen_user.o strncpy_user.o \
+ strnlen_user.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory. This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory. This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory. This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit - Set a bit and return its old value. This is
+ * called by test_and_set_bit() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value. This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value. This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <asm/irqflags.h>
+#include <asm/hazards.h>
+#include <linux/compiler.h>
+#include <linux/preempt.h>
+#include <linux/export.h>
+
+#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC)
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+ " .macro arch_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace void arch_local_irq_disable(void)
+{
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_disable);
+
+
+__asm__(
+ " .macro arch_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ preempt_disable();
+ asm volatile("arch_local_irq_save\t%0"
+ : "=r" (flags)
+ : /* no inputs */
+ : "memory");
+ preempt_enable();
+ return flags;
+}
+EXPORT_SYMBOL(arch_local_irq_save);
+
+
+__asm__(
+ " .macro arch_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /* see irqflags.h for inline function */
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace void arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of branch and call overhead on each
+ * local_irq_restore()
+ */
+ if (unlikely(!(flags & 0x0400)))
+ smtc_ipi_replay();
+#endif
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+
+notrace void __arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(__arch_local_irq_restore);
+
+#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <asm/mips-boards/maltaint.h>
#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
SMC_PORT(0x2F8, 3),
{
.mapbase = 0x1f000900, /* The CBUS UART */
- .irq = MIPS_CPU_IRQ_BASE + 2,
+ .irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.uartclk = 3686400, /* Twice the usual clk! */
.iotype = UPIO_MEM32,
.flags = CBUS_UART_FLAGS,
{
compat_sigset_t s;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
sigset_64to32(&s, set);
return copy_to_user(up, &s, sizeof s);
compat_sigset_t s;
int r;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
if ((r = copy_from_user(&s, up, sz)) == 0) {
sigset_32to64(set, &s);
struct vm_area_struct *vma;
int offset = mapping ? get_offset(mapping) : 0;
+ offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000;
+
addr = DCACHE_ALIGN(addr - offset) + offset;
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
interrupts = <2 7 0>;
};
+ sclpc@3c00 {
+ compatible = "fsl,mpc5200-lpbfifo";
+ reg = <0x3c00 0x60>;
+ interrupts = <2 23 0>;
+ };
+
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
};
-
- sclpc@3c00 {
- compatible = "fsl,mpc5200-lpbfifo";
- reg = <0x3c00 0x60>;
- interrupts = <3 23 0>;
- };
};
localbus {
#gpio-cells = <2>;
};
- psc@2000 { /* PSC1 in ac97 mode */
+ audioplatform: psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
};
localbus {
status = "disabled";
};
+
+ sound {
+ compatible = "phytec,pcm030-audio-fabric";
+ asoc-platform = <&audioplatform>;
+ };
};
case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
- default:
- pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
- __func__, virq, l1irq, l2irq);
- return -EINVAL;
+ case MPC52xx_IRQ_L1_CRIT:
+ pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
+ __func__, l2irq);
+ irq_set_chip(virq, &no_irq_chip);
+ return 0;
}
irq_set_chip_and_handler(virq, irqchip, handle_level_irq);
if (list_empty(&pe->edevs)) {
cnt = 0;
list_for_each_entry(child, &pe->child_list, child) {
- if (!(pe->type & EEH_PE_INVALID)) {
+ if (!(child->type & EEH_PE_INVALID)) {
cnt++;
break;
}
/* Get the top level device in the PE */
edev = of_node_to_eeh_dev(dn);
- edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+ if (edev->pe)
+ edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
dn = eeh_dev_to_of_node(edev);
if (!dn)
return NULL;
static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
{
- *kt_before = ktime_get_real();
+ *kt_before = ktime_get();
*in_purr = mfspr(SPRN_PURR);
/*
* Indicate to the HV that we are idle. Now would be
get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
get_lppaca()->idle = 0;
- return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+ return ktime_to_us(ktime_sub(ktime_get(), kt_before));
}
static int snooze_loop(struct cpuidle_device *dev,
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_CMPXCHG_LOCAL
select HAVE_CMPXCHG_DOUBLE
+ select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_VIRT_CPU_ACCOUNTING
select VIRT_CPU_ACCOUNTING
select ARCH_DISCARD_MEMBLOCK
#define PSW32_MASK_CC 0x00003000UL
#define PSW32_MASK_PM 0x00000f00UL
-#define PSW32_MASK_USER 0x00003F00UL
+#define PSW32_MASK_USER 0x0000FF00UL
#define PSW32_ADDR_AMODE 0x80000000UL
#define PSW32_ADDR_INSN 0x7FFFFFFFUL
#ifdef CONFIG_SCHED_BOOK
+extern unsigned char cpu_socket_id[NR_CPUS];
+#define topology_physical_package_id(cpu) (cpu_socket_id[cpu])
+
extern unsigned char cpu_core_id[NR_CPUS];
extern cpumask_t cpu_core_map[NR_CPUS];
#define PSW_MASK_EA 0x00000000UL
#define PSW_MASK_BA 0x00000000UL
-#define PSW_MASK_USER 0x00003F00UL
+#define PSW_MASK_USER 0x0000FF00UL
#define PSW_ADDR_AMODE 0x80000000UL
#define PSW_ADDR_INSN 0x7FFFFFFFUL
#define PSW_MASK_EA 0x0000000100000000UL
#define PSW_MASK_BA 0x0000000080000000UL
-#define PSW_MASK_USER 0x00003F8180000000UL
+#define PSW_MASK_USER 0x0000FF8180000000UL
#define PSW_ADDR_AMODE 0x0000000000000000UL
#define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL
regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+ /* Check for invalid user address space control. */
+ if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+ regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
for (i = 0; i < NUM_GPRS; i++)
regs->gprs[i] = (__u64) regs32.gprs[i];
/* Set up registers for signal handler */
regs->gprs[15] = (__force __u64) frame;
- regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
+ /* Force 31 bit amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__force __u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
/* Set up registers for signal handler */
regs->gprs[15] = (__force __u64) frame;
- regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
+ /* Force 31 bit amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
(user_sregs.regs.psw.mask & PSW_MASK_USER);
+ /* Check for invalid user address space control. */
+ if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+ regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
/* Check for invalid amode */
if (regs->psw.mask & PSW_MASK_EA)
regs->psw.mask |= PSW_MASK_BA;
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
- regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
+ /* Force default amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
- regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
+ /* Force default amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
static struct mask_info core_info;
cpumask_t cpu_core_map[NR_CPUS];
unsigned char cpu_core_id[NR_CPUS];
+unsigned char cpu_socket_id[NR_CPUS];
static struct mask_info book_info;
cpumask_t cpu_book_map[NR_CPUS];
cpumask_set_cpu(lcpu, &book->mask);
cpu_book_id[lcpu] = book->id;
cpumask_set_cpu(lcpu, &core->mask);
+ cpu_core_id[lcpu] = rcpu;
if (one_core_per_cpu) {
- cpu_core_id[lcpu] = rcpu;
+ cpu_socket_id[lcpu] = rcpu;
core = core->next;
} else {
- cpu_core_id[lcpu] = core->id;
+ cpu_socket_id[lcpu] = core->id;
}
smp_cpu_set_polarization(lcpu, tl_cpu->pp);
}
addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
- if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
- (void __user *)start, len)))
+ if ((end < start) || (end > TASK_SIZE))
return 0;
local_irq_save(flags);
addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
- if (end < start)
+ if ((end < start) || (end > TASK_SIZE))
goto slow_irqon;
/*
extern void irq_trans_init(struct device_node *dp);
extern char *build_path_component(struct device_node *dp);
-/* SPARC has a local implementation */
+/* SPARC has local implementations */
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
#define of_address_to_resource of_address_to_resource
+void __iomem *of_iomap(struct device_node *node, int index);
+#define of_iomap of_iomap
+
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */
err |= restore_fpu_state(regs, fpu_save);
err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
- err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
-
- if (err)
+ if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT)
goto segv;
err |= __get_user(rwin_save, &sf->rwin_save);
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
config ARCH_MAY_HAVE_PC_FDC
bool
+config ZONE_DMA
+ def_bool y
+
config NEED_DMA_MAP_STATE
def_bool y
bool
depends on !ARCH_FPGA
select GENERIC_GPIO
- select GPIO_SYSFS if EXPERIMENTAL
+ select GPIO_SYSFS
default y
if PUV3_NB0916
-include include/asm-generic/Kbuild.asm
generic-y += atomic.h
generic-y += auxvec.h
extern void uc32_notify_die(const char *str, struct pt_regs *regs,
struct siginfo *info, unsigned long err, unsigned long trap);
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
-
-extern void __show_regs(struct pt_regs *);
-
#endif /* __UNICORE_BUG_H__ */
: "memory", "cc");
break;
default:
- ret = __xchg_bad_pointer();
+ __xchg_bad_pointer();
}
return ret;
+++ /dev/null
-#include <asm-generic/kvm_para.h>
#define cpu_relax() barrier()
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
#ifndef __UNICORE_PTRACE_H__
#define __UNICORE_PTRACE_H__
-#define PTRACE_GET_THREAD_AREA 22
-
-/*
- * PSR bits
- */
-#define USER_MODE 0x00000010
-#define REAL_MODE 0x00000011
-#define INTR_MODE 0x00000012
-#define PRIV_MODE 0x00000013
-#define ABRT_MODE 0x00000017
-#define EXTN_MODE 0x0000001b
-#define SUSR_MODE 0x0000001f
-#define MODE_MASK 0x0000001f
-#define PSR_R_BIT 0x00000040
-#define PSR_I_BIT 0x00000080
-#define PSR_V_BIT 0x10000000
-#define PSR_C_BIT 0x20000000
-#define PSR_Z_BIT 0x40000000
-#define PSR_S_BIT 0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f 0xff000000 /* Flags */
-#define PSR_c 0x000000ff /* Control */
+#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call. Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
- unsigned long uregs[34];
-};
-
-#define UCreg_asr uregs[32]
-#define UCreg_pc uregs[31]
-#define UCreg_lr uregs[30]
-#define UCreg_sp uregs[29]
-#define UCreg_ip uregs[28]
-#define UCreg_fp uregs[27]
-#define UCreg_26 uregs[26]
-#define UCreg_25 uregs[25]
-#define UCreg_24 uregs[24]
-#define UCreg_23 uregs[23]
-#define UCreg_22 uregs[22]
-#define UCreg_21 uregs[21]
-#define UCreg_20 uregs[20]
-#define UCreg_19 uregs[19]
-#define UCreg_18 uregs[18]
-#define UCreg_17 uregs[17]
-#define UCreg_16 uregs[16]
-#define UCreg_15 uregs[15]
-#define UCreg_14 uregs[14]
-#define UCreg_13 uregs[13]
-#define UCreg_12 uregs[12]
-#define UCreg_11 uregs[11]
-#define UCreg_10 uregs[10]
-#define UCreg_09 uregs[9]
-#define UCreg_08 uregs[8]
-#define UCreg_07 uregs[7]
-#define UCreg_06 uregs[6]
-#define UCreg_05 uregs[5]
-#define UCreg_04 uregs[4]
-#define UCreg_03 uregs[3]
-#define UCreg_02 uregs[2]
-#define UCreg_01 uregs[1]
-#define UCreg_00 uregs[0]
-#define UCreg_ORIG_00 uregs[33]
-
-#ifdef __KERNEL__
-
#define user_mode(regs) \
(processor_mode(regs) == USER_MODE)
#define instruction_pointer(regs) ((regs)->UCreg_pc)
-#endif /* __KERNEL__ */
-
#endif /* __ASSEMBLY__ */
-
#endif
-
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += byteorder.h
+header-y += kvm_para.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += unistd.h
+
+generic-y += kvm_para.h
--- /dev/null
+/*
+ * linux/arch/unicore32/include/asm/ptrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__UNICORE_PTRACE_H__
+#define _UAPI__UNICORE_PTRACE_H__
+
+#define PTRACE_GET_THREAD_AREA 22
+
+/*
+ * PSR bits
+ */
+#define USER_MODE 0x00000010
+#define REAL_MODE 0x00000011
+#define INTR_MODE 0x00000012
+#define PRIV_MODE 0x00000013
+#define ABRT_MODE 0x00000017
+#define EXTN_MODE 0x0000001b
+#define SUSR_MODE 0x0000001f
+#define MODE_MASK 0x0000001f
+#define PSR_R_BIT 0x00000040
+#define PSR_I_BIT 0x00000080
+#define PSR_V_BIT 0x10000000
+#define PSR_C_BIT 0x20000000
+#define PSR_Z_BIT 0x40000000
+#define PSR_S_BIT 0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f 0xff000000 /* Flags */
+#define PSR_c 0x000000ff /* Control */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call. Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+ unsigned long uregs[34];
+};
+
+#define UCreg_asr uregs[32]
+#define UCreg_pc uregs[31]
+#define UCreg_lr uregs[30]
+#define UCreg_sp uregs[29]
+#define UCreg_ip uregs[28]
+#define UCreg_fp uregs[27]
+#define UCreg_26 uregs[26]
+#define UCreg_25 uregs[25]
+#define UCreg_24 uregs[24]
+#define UCreg_23 uregs[23]
+#define UCreg_22 uregs[22]
+#define UCreg_21 uregs[21]
+#define UCreg_20 uregs[20]
+#define UCreg_19 uregs[19]
+#define UCreg_18 uregs[18]
+#define UCreg_17 uregs[17]
+#define UCreg_16 uregs[16]
+#define UCreg_15 uregs[15]
+#define UCreg_14 uregs[14]
+#define UCreg_13 uregs[13]
+#define UCreg_12 uregs[12]
+#define UCreg_11 uregs[11]
+#define UCreg_10 uregs[10]
+#define UCreg_09 uregs[9]
+#define UCreg_08 uregs[8]
+#define UCreg_07 uregs[7]
+#define UCreg_06 uregs[6]
+#define UCreg_05 uregs[5]
+#define UCreg_04 uregs[4]
+#define UCreg_03 uregs[3]
+#define UCreg_02 uregs[2]
+#define UCreg_01 uregs[1]
+#define UCreg_00 uregs[0]
+#define UCreg_ORIG_00 uregs[33]
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__UNICORE_PTRACE_H__ */
/* Use the standard ABI for syscalls. */
#include <asm-generic/unistd.h>
+#define __ARCH_WANT_SYS_EXECVE
*/
ENTRY(ret_from_fork)
b.l schedule_tail
- get_thread_info tsk
- ldw r1, [tsk+], #TI_FLAGS @ check for syscall tracing
- mov why, #1
- cand.a r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
- beq ret_slow_syscall
- mov r1, sp
- mov r0, #1 @ trace exit [IP = 1]
- b.l syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
+ENTRY(ret_from_kernel_thread)
+ b.l schedule_tail
+ mov r0, r5
+ adr lr, ret_slow_syscall
+ mov pc, r4
+ENDPROC(ret_from_kernel_thread)
+
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
#endif
.ltorg
-ENTRY(sys_execve)
- add r3, sp, #S_OFF
- b __sys_execve
-ENDPROC(sys_execve)
-
ENTRY(sys_clone)
add ip, sp, #S_OFF
stw ip, [sp+], #4
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
int
copy_thread(unsigned long clone_flags, unsigned long stack_start,
struct thread_info *thread = task_thread_info(p);
struct pt_regs *childregs = task_pt_regs(p);
- *childregs = *regs;
- childregs->UCreg_00 = 0;
- childregs->UCreg_sp = stack_start;
-
memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
thread->cpu_context.sp = (unsigned long)childregs;
- thread->cpu_context.pc = (unsigned long)ret_from_fork;
-
- if (clone_flags & CLONE_SETTLS)
- childregs->UCreg_16 = regs->UCreg_03;
+ if (unlikely(!regs)) {
+ thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
+ thread->cpu_context.r4 = stack_start;
+ thread->cpu_context.r5 = stk_sz;
+ memset(childregs, 0, sizeof(struct pt_regs));
+ } else {
+ thread->cpu_context.pc = (unsigned long)ret_from_fork;
+ *childregs = *regs;
+ childregs->UCreg_00 = 0;
+ childregs->UCreg_sp = stack_start;
+ if (clone_flags & CLONE_SETTLS)
+ childregs->UCreg_16 = regs->UCreg_03;
+ }
return 0;
}
}
EXPORT_SYMBOL(dump_fpu);
-/*
- * Shuffle the argument into the correct register before calling the
- * thread function. r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
- */
-asm(".pushsection .text\n"
-" .align\n"
-" .type kernel_thread_helper, #function\n"
-"kernel_thread_helper:\n"
-" mov.a asr, r7\n"
-" mov r0, r4\n"
-" mov lr, r6\n"
-" mov pc, r5\n"
-" .size kernel_thread_helper, . - kernel_thread_helper\n"
-" .popsection");
-
-/*
- * Create a kernel thread.
- */
-pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
- struct pt_regs regs;
-
- memset(®s, 0, sizeof(regs));
-
- regs.UCreg_04 = (unsigned long)arg;
- regs.UCreg_05 = (unsigned long)fn;
- regs.UCreg_06 = (unsigned long)do_exit;
- regs.UCreg_07 = PRIV_MODE;
- regs.UCreg_pc = (unsigned long)kernel_thread_helper;
- regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT;
-
- return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
unsigned long get_wchan(struct task_struct *p)
{
struct stackframe frame;
extern void kernel_thread_helper(void);
extern void __init early_signal_init(void);
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+extern void __show_regs(struct pt_regs *);
+
#endif
parent_tid, child_tid);
}
-/* sys_execve() executes a new program.
- * This is called indirectly via a small wrapper
- */
-asmlinkage long __sys_execve(const char __user *filename,
- const char __user *const __user *argv,
- const char __user *const __user *envp,
- struct pt_regs *regs)
-{
- int error;
- struct filename *fn;
-
- fn = getname(filename);
- error = PTR_ERR(fn);
- if (IS_ERR(fn))
- goto out;
- error = do_execve(fn->name, argv, envp, regs);
- putname(fn);
-out:
- return error;
-}
-
-int kernel_execve(const char *filename,
- const char *const argv[],
- const char *const envp[])
-{
- struct pt_regs regs;
- int ret;
-
- memset(®s, 0, sizeof(struct pt_regs));
- ret = do_execve(filename,
- (const char __user *const __user *)argv,
- (const char __user *const __user *)envp, ®s);
- if (ret < 0)
- goto out;
-
- /*
- * Save argc to the register structure for userspace.
- */
- regs.UCreg_00 = ret;
-
- /*
- * We were successful. We won't be returning to our caller, but
- * instead to user space by manipulating the kernel stack.
- */
- asm("add r0, %0, %1\n\t"
- "mov r1, %2\n\t"
- "mov r2, %3\n\t"
- "mov r22, #0\n\t" /* not a syscall */
- "mov r23, %0\n\t" /* thread structure */
- "b.l memmove\n\t" /* copy regs to top of stack */
- "mov sp, r0\n\t" /* reposition stack pointer */
- "b ret_to_user"
- :
- : "r" (current_thread_info()),
- "Ir" (THREAD_START_SP - sizeof(regs)),
- "r" (®s),
- "Ir" (sizeof(regs))
- : "r0", "r1", "r2", "r3", "ip", "lr", "memory");
-
- out:
- return ret;
-}
-
/* Note: used by the compat code even in 64-bit Linux. */
SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
}
static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
- struct task_struct *tsk)
+ unsigned int flags, struct task_struct *tsk)
{
struct vm_area_struct *vma;
int fault;
* If for any reason at all we couldn't handle the fault, make
* sure we exit gracefully rather than endlessly redo the fault.
*/
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK,
- (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR))
- return fault;
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
return fault;
check_stack:
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ ((!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
tsk = current;
mm = tsk->mm;
if (!user_mode(regs)
&& !search_exception_tables(regs->UCreg_pc))
goto no_context;
+retry:
down_read(&mm->mmap_sem);
} else {
/*
#endif
}
- fault = __do_pf(mm, addr, fsr, tsk);
+ fault = __do_pf(mm, addr, fsr, flags, tsk);
+
+ /* If we need to retry but a fatal signal is pending, handle the
+ * signal first. We do not need to release the mmap_sem because
+ * it would already be released in __lock_page_or_retry in
+ * mm/filemap.c. */
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return 0;
+
+ if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) {
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+ if (fault & VM_FAULT_RETRY) {
+ /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+ * of starvation. */
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+ goto retry;
+ }
+ }
+
up_read(&mm->mmap_sem);
/*
#include <asm/setup.h>
#include <asm/desc.h>
+#undef memcpy /* Use memcpy from misc.c */
+
#include "eboot.h"
static efi_system_table_t *sys_table;
setup_corrupt:
.byte 7
.string "No setup signature found...\n"
-
- .data
-dummy: .long 0
#define _ASM_X86_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops *dma_ops;
#endif
}
#endif
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. The previous stack will be directly underneath the saved
- * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
- *
- * This is valid only for kernel mode traps.
- */
-static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
-{
#ifdef CONFIG_X86_32
- return (unsigned long)(®s->sp);
+extern unsigned long kernel_stack_pointer(struct pt_regs *regs);
#else
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
return regs->sp;
-#endif
}
+#endif
#define GET_IP(regs) ((regs)->ip)
#define GET_FP(regs) ((regs)->bp)
return irq;
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
void __init acpi_set_irq_model_pic(void)
{
#endif
if (strncmp(str, "nonvs", 5) == 0)
acpi_nvs_nosave();
+ if (strncmp(str, "nonvs_s3", 8) == 0)
+ acpi_nvs_nosave_s3();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
}
}
+ /*
+ * The way access filter has a performance penalty on some workloads.
+ * Disable it on the affected CPUs.
+ */
+ if ((c->x86 == 0x15) &&
+ (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+ u64 val;
+
+ if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+ val |= 0x1E;
+ wrmsrl_safe(0xc0011021, val);
+ }
+ }
+
cpu_detect_cache_sizes(c);
/* Multi core CPU? */
*
* Written by Jacob Shin - AMD, Inc.
*
- * Support: borislav.petkov@amd.com
+ * Maintained by: Borislav Petkov <bp@alien8.de>
*
* April 2006
* - added support for AMD Family 0x10 processors
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
+static long cmci_rediscover_work_func(void *arg)
+{
+ int banks;
+
+ /* Recheck banks in case CPUs don't all have the same */
+ if (cmci_supported(&banks))
+ cmci_discover(banks);
+
+ return 0;
+}
+
/*
* After a CPU went down cycle through all the others and rediscover
* Must run in process context.
*/
void cmci_rediscover(int dying)
{
- int banks;
- int cpu;
- cpumask_var_t old;
+ int cpu, banks;
if (!cmci_supported(&banks))
return;
- if (!alloc_cpumask_var(&old, GFP_KERNEL))
- return;
- cpumask_copy(old, ¤t->cpus_allowed);
for_each_online_cpu(cpu) {
if (cpu == dying)
continue;
- if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
+
+ if (cpu == smp_processor_id()) {
+ cmci_rediscover_work_func(NULL);
continue;
- /* Recheck banks in case CPUs don't all have the same */
- if (cmci_supported(&banks))
- cmci_discover(banks);
- }
+ }
- set_cpus_allowed_ptr(current, old);
- free_cpumask_var(old);
+ work_on_cpu(cpu, cmci_rediscover_work_func, NULL);
+ }
}
/*
*/
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
/* 0(%rsp): old_rsp-ARGOFFSET */
*/
.macro apicinterrupt num sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
pushq_cfi $~(\num)
.Lcommon_\sym:
interrupt \do_sym
*/
.macro zeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
.macro paranoidzeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
.macro paranoidzeroentry_ist sym do_sym ist
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
.macro errorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
/* error code is on the stack already */
.macro paranoiderrorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
* Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
*
* Maintainers:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
- * Borislav Petkov <borislav.petkov@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
+ * Borislav Petkov <bp@alien8.de>
*
* This driver allows to upgrade microcode on F10h AMD
* CPUs and later.
#define F1XH_MPB_MAX_SIZE 2048
#define F14H_MPB_MAX_SIZE 1824
#define F15H_MPB_MAX_SIZE 4096
+#define F16H_MPB_MAX_SIZE 3458
switch (c->x86) {
case 0x14:
case 0x15:
max_size = F15H_MPB_MAX_SIZE;
break;
+ case 0x16:
+ max_size = F16H_MPB_MAX_SIZE;
+ break;
default:
max_size = F1XH_MPB_MAX_SIZE;
break;
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/rcupdate.h>
+#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#define FLAG_MASK FLAG_MASK_32
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
+ *
+ * Now, if the stack is empty, '®s->sp' is out of range. In this
+ * case we try to take the previous stack. To always return a non-null
+ * stack pointer we fall back to regs as stack if no previous stack
+ * exists.
+ *
+ * This is valid only for kernel mode traps.
+ */
+unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+ unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1);
+ unsigned long sp = (unsigned long)®s->sp;
+ struct thread_info *tinfo;
+
+ if (context == (sp & ~(THREAD_SIZE - 1)))
+ return sp;
+
+ tinfo = (struct thread_info *)context;
+ if (tinfo->previous_esp)
+ return tinfo->previous_esp;
+
+ return (unsigned long)regs;
+}
+EXPORT_SYMBOL_GPL(kernel_stack_pointer);
+
static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
{
struct kvm_cpuid_entry2 *best;
+ if (!static_cpu_has(X86_FEATURE_XSAVE))
+ return 0;
+
best = kvm_find_cpuid_entry(vcpu, 1, 0);
return best && (best->ecx & bit(X86_FEATURE_XSAVE));
}
}
}
- exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
/* Exposing INVPCID only when PCID is exposed */
best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
if (vmx_invpcid_supported() &&
best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
guest_cpuid_has_pcid(vcpu)) {
+ exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
exec_control);
} else {
- exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
- vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
- exec_control);
+ if (cpu_has_secondary_exec_ctrls()) {
+ exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
+ exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
+ vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
+ exec_control);
+ }
if (best)
best->ebx &= ~bit(X86_FEATURE_INVPCID);
}
int pending_vec, max_bits, idx;
struct desc_ptr dt;
+ if (!guest_cpuid_has_xsave(vcpu) && (sregs->cr4 & X86_CR4_OSXSAVE))
+ return -EINVAL;
+
dt.size = sregs->idt.limit;
dt.address = sregs->idt.base;
kvm_x86_ops->set_idt(vcpu, &dt);
}
if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
- || vmflag == VM_HUGETLB) {
+ || vmflag & VM_HUGETLB) {
local_flush_tlb();
goto flush_all;
}
reg_read(reg, value);
}
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ /* force interrupt pin value to 0 */
+ *value = reg->sim_reg.value & 0xfff00ff;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
};
static void __init init_sim_regs(void)
#include <asm/i8259.h>
#include <asm/io.h>
#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
static int ce4100_i8042_detect(void)
{
return 0;
}
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+ outb(0x4, 0xcf9);
+}
+
#ifdef CONFIG_SERIAL_8250
static unsigned int mem_serial_in(struct uart_port *p, int offset)
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.pci.init = ce4100_pci_init;
+ /*
+ * By default, the reboot method is ACPI which is supported by the
+ * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+ * the bootloader will however issue a system power off instead of
+ * reboot. By using BOOT_KBD we ensure proper system reboot as
+ * expected.
+ */
+ reboot_type = BOOT_KBD;
+
#ifdef CONFIG_X86_IO_APIC
x86_init.pci.init_irq = sdv_pci_init;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
#endif
+
+ pm_power_off = ce4100_power_off;
}
rq_end_io_fn *done)
{
int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
+ bool is_pm_resume;
WARN_ON(irqs_disabled());
rq->rq_disk = bd_disk;
rq->end_io = done;
+ /*
+ * need to check this before __blk_run_queue(), because rq can
+ * be freed before that returns.
+ */
+ is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME;
spin_lock_irq(q->queue_lock);
__elv_add_request(q, rq, where);
__blk_run_queue(q);
/* the queue is stopped so it won't be run */
- if (rq->cmd_type == REQ_TYPE_PM_RESUME)
+ if (is_pm_resume)
q->request_fn(q);
spin_unlock_irq(q->queue_lock);
}
This driver supports ACPI-controlled docking stations and removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.
+config ACPI_I2C
+ def_tristate I2C
+ depends on I2C
+ help
+ ACPI I2C enumeration support.
+
config ACPI_PROCESSOR
tristate "Processor"
select THERMAL
acpi-y += osl.o utils.o reboot.o
acpi-y += nvs.o
-# sleep related files
+# Power management related files
acpi-y += wakeup.o
acpi-y += sleep.o
+acpi-$(CONFIG_PM) += device_pm.o
acpi-$(CONFIG_ACPI_SLEEP) += proc.o
#
acpi-y += bus.o glue.o
acpi-y += scan.o
+acpi-y += resource.o
acpi-y += processor_core.o
acpi-y += ec.o
acpi-$(CONFIG_ACPI_DOCK) += dock.o
acpi-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
+acpi-y += acpi_platform.o
acpi-y += power.o
acpi-y += event.o
acpi-y += sysfs.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
+obj-$(CONFIG_ACPI_I2C) += acpi_i2c.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
--- /dev/null
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/ioport.h>
+
+ACPI_MODULE_NAME("i2c");
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+ struct i2c_board_info *info = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_i2c_serialbus *sb;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+ info->addr = sb->slave_address;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+ }
+ } else if (info->irq < 0) {
+ struct resource r;
+
+ if (acpi_dev_resource_interrupt(ares, 0, &r))
+ info->irq = r.start;
+ }
+
+ /* Tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct list_head resource_list;
+ struct i2c_board_info info;
+ struct acpi_device *adev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ memset(&info, 0, sizeof(info));
+ info.acpi_node.handle = handle;
+ info.irq = -1;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_i2c_add_resource, &info);
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (ret < 0 || !info.addr)
+ return AE_OK;
+
+ strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+ if (!i2c_new_device(adapter, &info)) {
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adapter: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void acpi_i2c_register_devices(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ acpi_status status;
+
+ handle = ACPI_HANDLE(&adapter->dev);
+ if (!handle)
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_i2c_add_device, NULL,
+ adapter, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
#include <linux/types.h>
#include <linux/memory_hotplug.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <acpi/acpi_drivers.h>
#define ACPI_MEMORY_DEVICE_CLASS "memory"
unsigned short caching; /* memory cache attribute */
unsigned short write_protect; /* memory read/write attribute */
unsigned int enabled:1;
+ unsigned int failed:1;
};
struct acpi_memory_device {
struct list_head res_list;
};
-static int acpi_hotmem_initialized;
-
static acpi_status
acpi_memory_get_resource(struct acpi_resource *resource, void *context)
{
return AE_OK;
}
+static void
+acpi_memory_free_device_resources(struct acpi_memory_device *mem_device)
+{
+ struct acpi_memory_info *info, *n;
+
+ list_for_each_entry_safe(info, n, &mem_device->res_list, list)
+ kfree(info);
+ INIT_LIST_HEAD(&mem_device->res_list);
+}
+
static int
acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
{
acpi_status status;
- struct acpi_memory_info *info, *n;
-
if (!list_empty(&mem_device->res_list))
return 0;
status = acpi_walk_resources(mem_device->device->handle, METHOD_NAME__CRS,
acpi_memory_get_resource, mem_device);
if (ACPI_FAILURE(status)) {
- list_for_each_entry_safe(info, n, &mem_device->res_list, list)
- kfree(info);
- INIT_LIST_HEAD(&mem_device->res_list);
+ acpi_memory_free_device_resources(mem_device);
return -EINVAL;
}
/* Get the parent device */
result = acpi_bus_get_device(phandle, &pdevice);
if (result) {
- printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
+ acpi_handle_warn(phandle, "Cannot get acpi bus device\n");
return -EINVAL;
}
*/
result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
if (result) {
- printk(KERN_WARNING PREFIX "Cannot add acpi bus");
+ acpi_handle_warn(handle, "Cannot add acpi bus\n");
return -EINVAL;
}
end:
*mem_device = acpi_driver_data(device);
if (!(*mem_device)) {
- printk(KERN_ERR "\n driver data not found");
+ dev_err(&device->dev, "driver data not found\n");
return -ENODEV;
}
/* Get the range from the _CRS */
result = acpi_memory_get_device_resources(mem_device);
if (result) {
- printk(KERN_ERR PREFIX "get_device_resources failed\n");
+ dev_err(&mem_device->device->dev,
+ "get_device_resources failed\n");
mem_device->state = MEMORY_INVALID_STATE;
return result;
}
node = memory_add_physaddr_to_nid(info->start_addr);
result = add_memory(node, info->start_addr, info->length);
- if (result)
+
+ /*
+ * If the memory block has been used by the kernel, add_memory()
+ * returns -EEXIST. If add_memory() returns the other error, it
+ * means that this memory block is not used by the kernel.
+ */
+ if (result && result != -EEXIST) {
+ info->failed = 1;
continue;
- info->enabled = 1;
+ }
+
+ if (!result)
+ info->enabled = 1;
+ /*
+ * Add num_enable even if add_memory() returns -EEXIST, so the
+ * device is bound to this driver.
+ */
num_enabled++;
}
if (!num_enabled) {
- printk(KERN_ERR PREFIX "add_memory failed\n");
+ dev_err(&mem_device->device->dev, "add_memory failed\n");
mem_device->state = MEMORY_INVALID_STATE;
return -EINVAL;
}
return 0;
}
-static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
+static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
{
- acpi_status status;
- struct acpi_object_list arg_list;
- union acpi_object arg;
- unsigned long long current_status;
-
-
- /* Issue the _EJ0 command */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = 1;
- status = acpi_evaluate_object(mem_device->device->handle,
- "_EJ0", &arg_list, NULL);
- /* Return on _EJ0 failure */
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "_EJ0 failed"));
- return -ENODEV;
- }
-
- /* Evalute _STA to check if the device is disabled */
- status = acpi_evaluate_integer(mem_device->device->handle, "_STA",
- NULL, ¤t_status);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- /* Check for device status. Device should be disabled */
- if (current_status & ACPI_STA_DEVICE_ENABLED)
- return -EINVAL;
+ int result = 0;
+ struct acpi_memory_info *info, *n;
- return 0;
-}
+ list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
+ if (info->failed)
+ /* The kernel does not use this memory block */
+ continue;
-static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
-{
- int result;
- struct acpi_memory_info *info, *n;
+ if (!info->enabled)
+ /*
+ * The kernel uses this memory block, but it may be not
+ * managed by us.
+ */
+ return -EBUSY;
+ result = remove_memory(info->start_addr, info->length);
+ if (result)
+ return result;
- /*
- * Ask the VM to offline this memory range.
- * Note: Assume that this function returns zero on success
- */
- list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
- if (info->enabled) {
- result = remove_memory(info->start_addr, info->length);
- if (result)
- return result;
- }
+ list_del(&info->list);
kfree(info);
}
- /* Power-off and eject the device */
- result = acpi_memory_powerdown_device(mem_device);
- if (result) {
- /* Set the status of the device to invalid */
- mem_device->state = MEMORY_INVALID_STATE;
- return result;
- }
-
- mem_device->state = MEMORY_POWER_OFF_STATE;
return result;
}
{
struct acpi_memory_device *mem_device;
struct acpi_device *device;
+ struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
switch (event) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived DEVICE CHECK notification for device\n"));
if (acpi_memory_get_device(handle, &mem_device)) {
- printk(KERN_ERR PREFIX "Cannot find driver data\n");
+ acpi_handle_err(handle, "Cannot find driver data\n");
break;
}
break;
if (acpi_memory_enable_device(mem_device)) {
- printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+ acpi_handle_err(handle,"Cannot enable memory device\n");
break;
}
"\nReceived EJECT REQUEST notification for device\n"));
if (acpi_bus_get_device(handle, &device)) {
- printk(KERN_ERR PREFIX "Device doesn't exist\n");
+ acpi_handle_err(handle, "Device doesn't exist\n");
break;
}
mem_device = acpi_driver_data(device);
if (!mem_device) {
- printk(KERN_ERR PREFIX "Driver Data is NULL\n");
+ acpi_handle_err(handle, "Driver Data is NULL\n");
break;
}
- /*
- * Currently disabling memory device from kernel mode
- * TBD: Can also be disabled from user mode scripts
- * TBD: Can also be disabled by Callback registration
- * with generic sysfs driver
- */
- if (acpi_memory_disable_device(mem_device)) {
- printk(KERN_ERR PREFIX "Disable memory device\n");
- /*
- * If _EJ0 was called but failed, _OST is not
- * necessary.
- */
- if (mem_device->state == MEMORY_INVALID_STATE)
- return;
-
+ ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+ if (!ej_event) {
+ pr_err(PREFIX "No memory, dropping EJECT\n");
break;
}
- /*
- * TBD: Invoke acpi_bus_remove to cleanup data structures
- */
+ ej_event->handle = handle;
+ ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ (void *)ej_event);
- /* _EJ0 succeeded; _OST is not necessary */
+ /* eject is performed asynchronously */
return;
-
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
return;
}
+static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
+{
+ if (!mem_device)
+ return;
+
+ acpi_memory_free_device_resources(mem_device);
+ kfree(mem_device);
+}
+
static int acpi_memory_device_add(struct acpi_device *device)
{
int result;
/* Set the device state */
mem_device->state = MEMORY_POWER_ON_STATE;
- printk(KERN_DEBUG "%s \n", acpi_device_name(device));
-
- /*
- * Early boot code has recognized memory area by EFI/E820.
- * If DSDT shows these memory devices on boot, hotplug is not necessary
- * for them. So, it just returns until completion of this driver's
- * start up.
- */
- if (!acpi_hotmem_initialized)
- return 0;
+ pr_debug("%s\n", acpi_device_name(device));
if (!acpi_memory_check_device(mem_device)) {
/* call add_memory func */
result = acpi_memory_enable_device(mem_device);
- if (result)
- printk(KERN_ERR PREFIX
+ if (result) {
+ dev_err(&device->dev,
"Error in acpi_memory_enable_device\n");
+ acpi_memory_device_free(mem_device);
+ }
}
return result;
}
static int acpi_memory_device_remove(struct acpi_device *device, int type)
{
struct acpi_memory_device *mem_device = NULL;
-
+ int result;
if (!device || !acpi_driver_data(device))
return -EINVAL;
mem_device = acpi_driver_data(device);
- kfree(mem_device);
+
+ result = acpi_memory_remove_memory(mem_device);
+ if (result)
+ return result;
+
+ acpi_memory_device_free(mem_device);
return 0;
}
return -ENODEV;
}
- acpi_hotmem_initialized = 1;
return 0;
}
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
if (num < 1 || num >= 100)
return -EINVAL;
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
if (num < 1 || num >= 100)
return -EINVAL;
struct device_attribute *attr, const char *buf, size_t count)
{
unsigned long num;
- if (strict_strtoul(buf, 0, &num))
+ if (kstrtoul(buf, 0, &num))
return -EINVAL;
mutex_lock(&isolated_cpus_lock);
acpi_pad_idle_cpus(num);
dev_name(&device->dev), event, 0);
break;
default:
- printk(KERN_WARNING "Unsupported event [0x%x]\n", event);
+ pr_warn("Unsupported event [0x%x]\n", event);
break;
}
}
--- /dev/null
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Mathias Nyman <mathias.nyman@linux.intel.com>
+ * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("platform");
+
+/**
+ * acpi_create_platform_device - Create platform device for ACPI device node
+ * @adev: ACPI device node to create a platform device for.
+ *
+ * Check if the given @adev can be represented as a platform device and, if
+ * that's the case, create and register a platform device, populate its common
+ * resources and returns a pointer to it. Otherwise, return %NULL.
+ *
+ * The platform device's name will be taken from the @adev's _HID and _UID.
+ */
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
+{
+ struct platform_device *pdev = NULL;
+ struct acpi_device *acpi_parent;
+ struct platform_device_info pdevinfo;
+ struct resource_list_entry *rentry;
+ struct list_head resource_list;
+ struct resource *resources;
+ int count;
+
+ /* If the ACPI node already has a physical device attached, skip it. */
+ if (adev->physical_node_count)
+ return NULL;
+
+ INIT_LIST_HEAD(&resource_list);
+ count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+ if (count <= 0)
+ return NULL;
+
+ resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
+ if (!resources) {
+ dev_err(&adev->dev, "No memory for resources\n");
+ acpi_dev_free_resource_list(&resource_list);
+ return NULL;
+ }
+ count = 0;
+ list_for_each_entry(rentry, &resource_list, node)
+ resources[count++] = rentry->res;
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ memset(&pdevinfo, 0, sizeof(pdevinfo));
+ /*
+ * If the ACPI node has a parent and that parent has a physical device
+ * attached to it, that physical device should be the parent of the
+ * platform device we are about to create.
+ */
+ pdevinfo.parent = NULL;
+ acpi_parent = adev->parent;
+ if (acpi_parent) {
+ struct acpi_device_physical_node *entry;
+ struct list_head *list;
+
+ mutex_lock(&acpi_parent->physical_node_lock);
+ list = &acpi_parent->physical_node_list;
+ if (!list_empty(list)) {
+ entry = list_first_entry(list,
+ struct acpi_device_physical_node,
+ node);
+ pdevinfo.parent = entry->dev;
+ }
+ mutex_unlock(&acpi_parent->physical_node_lock);
+ }
+ pdevinfo.name = dev_name(&adev->dev);
+ pdevinfo.id = -1;
+ pdevinfo.res = resources;
+ pdevinfo.num_res = count;
+ pdevinfo.acpi_node.handle = adev->handle;
+ pdev = platform_device_register_full(&pdevinfo);
+ if (IS_ERR(pdev)) {
+ dev_err(&adev->dev, "platform device creation failed: %ld\n",
+ PTR_ERR(pdev));
+ pdev = NULL;
+ } else {
+ dev_dbg(&adev->dev, "created platform device %s\n",
+ dev_name(&pdev->dev));
+ }
+
+ kfree(resources);
+ return pdev;
+}
utxfinit.o \
utxferror.o \
utxfmutex.o
+
+acpi-$(ACPI_FUTURE_USAGE) += uttrack.o utcache.o utclib.o
+
#ifndef __ACDEBUG_H__
#define __ACDEBUG_H__
-#define ACPI_DEBUG_BUFFER_SIZE 4196
+#define ACPI_DEBUG_BUFFER_SIZE 0x4000 /* 16K buffer for return objects */
-struct command_info {
+struct acpi_db_command_info {
char *name; /* Command Name */
u8 min_args; /* Minimum arguments required */
};
-struct argument_info {
+struct acpi_db_command_help {
+ u8 line_count; /* Number of help lines */
+ char *invocation; /* Command Invocation */
+ char *description; /* Command Description */
+};
+
+struct acpi_db_argument_info {
char *name; /* Argument Name */
};
+struct acpi_db_execute_walk {
+ u32 count;
+ u32 max_count;
+};
+
#define PARAM_LIST(pl) pl
#define DBTEST_OUTPUT_LEVEL(lvl) if (acpi_gbl_db_opt_verbose)
#define VERBOSE_PRINT(fp) DBTEST_OUTPUT_LEVEL(lvl) {\
/*
* dbcmds - debug commands and output routines
*/
-acpi_status acpi_db_disassemble_method(char *name);
+struct acpi_namespace_node *acpi_db_convert_to_node(char *in_string);
void acpi_db_display_table_info(char *table_arg);
-void acpi_db_unload_acpi_table(char *table_arg, char *instance_arg);
+void acpi_db_display_template(char *buffer_arg);
-void
-acpi_db_set_method_breakpoint(char *location,
- struct acpi_walk_state *walk_state,
- union acpi_parse_object *op);
+void acpi_db_unload_acpi_table(char *name);
-void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
+void acpi_db_send_notify(char *name, u32 value);
-void acpi_db_get_bus_info(void);
+void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
-void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
+acpi_status acpi_db_sleep(char *object_arg);
-void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
+void acpi_db_display_locks(void);
-void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+void acpi_db_display_resources(char *object_arg);
-void acpi_db_send_notify(char *name, u32 value);
+ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
+
+void acpi_db_display_handlers(void);
+
+ACPI_HW_DEPENDENT_RETURN_VOID(void
+ acpi_db_generate_gpe(char *gpe_arg,
+ char *block_arg))
+
+/*
+ * dbmethod - control method commands
+ */
+void
+acpi_db_set_method_breakpoint(char *location,
+ struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op);
+
+void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
-acpi_status
-acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
+acpi_status acpi_db_disassemble_method(char *name);
-void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
+void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
-acpi_status acpi_db_find_name_in_namespace(char *name_arg);
+void acpi_db_batch_execute(char *count_arg);
+/*
+ * dbnames - namespace commands
+ */
void acpi_db_set_scope(char *name);
-ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg))
+void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
-void acpi_db_find_references(char *object_arg);
+void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
-void acpi_db_display_locks(void);
+acpi_status acpi_db_find_name_in_namespace(char *name_arg);
-void acpi_db_display_resources(char *object_arg);
+void acpi_db_check_predefined_names(void);
-ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
+acpi_status
+acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
void acpi_db_check_integrity(void);
-ACPI_HW_DEPENDENT_RETURN_VOID(void
- acpi_db_generate_gpe(char *gpe_arg,
- char *block_arg))
-
-void acpi_db_check_predefined_names(void);
+void acpi_db_find_references(char *object_arg);
-void acpi_db_batch_execute(void);
+void acpi_db_get_bus_info(void);
/*
* dbdisply - debug display commands
/*
* dbexec - debugger control method execution
*/
-void acpi_db_execute(char *name, char **args, u32 flags);
+void
+acpi_db_execute(char *name, char **args, acpi_object_type * types, u32 flags);
void
acpi_db_create_execution_threads(char *num_threads_arg,
* dbfileio - Debugger file I/O commands
*/
acpi_object_type
-acpi_db_match_argument(char *user_argument, struct argument_info *arguments);
+acpi_db_match_argument(char *user_argument,
+ struct acpi_db_argument_info *arguments);
void acpi_db_close_debug_file(void);
void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context);
+acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op);
+
+char *acpi_db_get_next_token(char *string,
+ char **next, acpi_object_type * return_type);
+
/*
* dbstats - Generation and display of ACPI table statistics
*/
acpi_status
acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state);
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
- *origin, union acpi_operand_object
- *mth_desc, struct acpi_thread_state
- *thread);
+struct acpi_walk_state * acpi_ds_create_walk_state(acpi_owner_id owner_id,
+ union acpi_parse_object
+ *origin,
+ union acpi_operand_object
+ *mth_desc,
+ struct acpi_thread_state
+ *thread);
acpi_status
acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state,
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
u32 gpe_number);
/*
* Enable "slack" in the AML interpreter? Default is FALSE, and the
- * interpreter strictly follows the ACPI specification. Setting to TRUE
+ * interpreter strictly follows the ACPI specification. Setting to TRUE
* allows the interpreter to ignore certain errors and/or bad AML constructs.
*
* Currently, these features are enabled by this flag:
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_no_resource_disassembly, FALSE);
-/*****************************************************************************
- *
- * Debug support
- *
- ****************************************************************************/
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-ACPI_EXTERN u32 acpi_gpe_count;
-ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-
/*****************************************************************************
*
* ACPI Table globals
*
****************************************************************************/
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-/* Lists for tracking memory allocations */
-
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
-ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
-#endif
-
/* Object caches */
ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache;
#endif
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Lists for tracking memory allocations */
+
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
+ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
+#endif
+
/*****************************************************************************
*
* Namespace globals
#if (!ACPI_REDUCED_HARDWARE)
ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
-ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler;
+ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
#endif /* !ACPI_REDUCED_HARDWARE */
+/*****************************************************************************
+ *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+
/*****************************************************************************
*
* Debugger globals
ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
-ACPI_EXTERN char acpi_gbl_db_line_buf[80];
-ACPI_EXTERN char acpi_gbl_db_parsed_buf[80];
-ACPI_EXTERN char acpi_gbl_db_scope_buf[40];
-ACPI_EXTERN char acpi_gbl_db_debug_filename[40];
+ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
+ACPI_EXTERN char acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE];
+ACPI_EXTERN char acpi_gbl_db_scope_buf[80];
+ACPI_EXTERN char acpi_gbl_db_debug_filename[80];
ACPI_EXTERN u8 acpi_gbl_db_output_to_file;
ACPI_EXTERN char *acpi_gbl_db_buffer;
ACPI_EXTERN char *acpi_gbl_db_filename;
};
typedef
-acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
+acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
/*
- * Bitmapped ACPI types. Used internally only
+ * Bitmapped ACPI types. Used internally only
*/
#define ACPI_BTYPE_ANY 0x00000000
#define ACPI_BTYPE_INTEGER 0x00000001
struct acpi_namespace_node *gpe_device;
};
-typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *gpe_xrupt_info,
- struct acpi_gpe_block_info *gpe_block, void *context);
+typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *
+ gpe_xrupt_info,
+ struct acpi_gpe_block_info *gpe_block,
+ void *context);
/* Information about each particular fixed event */
};
/*
- * Thread state - one per thread across multiple walk states. Multiple walk
+ * Thread state - one per thread across multiple walk states. Multiple walk
* states are created when there are nested control methods executing.
*/
struct acpi_thread_state {
*
****************************************************************************/
-typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
+typedef acpi_status(*acpi_execute_op) (struct acpi_walk_state * walk_state);
/* Address Range info block */
acpi_handle method;
acpi_handle main_thread_gate;
acpi_handle thread_complete_gate;
+ acpi_handle info_gate;
acpi_thread_id *threads;
u32 num_threads;
u32 num_created;
u32 num_loops;
char pathname[128];
char **args;
+ acpi_object_type *types;
/*
* Arguments to be passed to method for the command
/* These macros reverse the bytes during the move, converting little-endian to big endian */
- /* Big Endian <== Little Endian */
- /* Hi...Lo Lo...Hi */
+ /* Big Endian <== Little Endian */
+ /* Hi...Lo Lo...Hi */
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
- (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
+ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_32(d, s) {(*(u32 *)(void *)(d))=0;\
- ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
- ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+ ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+ ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_16_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\
- ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
- ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
+ ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
+ ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
/* 32-bit source, 16/32/64 destination */
#define ACPI_MOVE_32_TO_16(d, s) ACPI_MOVE_16_TO_16(d, s) /* Truncate to 16 */
#define ACPI_MOVE_32_TO_32(d, s) {(( u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
- (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
- (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
- (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
+ (( u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
+ (( u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
+ (( u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
#define ACPI_MOVE_32_TO_64(d, s) {(*(u64 *)(void *)(d))=0;\
((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
#endif
#endif
-/* Macros based on machine integer width */
-
-#if ACPI_MACHINE_WIDTH == 32
-#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_32_TO_16(d, s)
-
-#elif ACPI_MACHINE_WIDTH == 64
-#define ACPI_MOVE_SIZE_TO_16(d, s) ACPI_MOVE_64_TO_16(d, s)
-
-#else
-#error unknown ACPI_MACHINE_WIDTH
-#endif
-
/*
* Fast power-of-two math macros for non-optimized compilers
*/
-#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2)))
-#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2)))
-#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1)))
+#define _ACPI_DIV(value, power_of2) ((u32) ((value) >> (power_of2)))
+#define _ACPI_MUL(value, power_of2) ((u32) ((value) << (power_of2)))
+#define _ACPI_MOD(value, divisor) ((u32) ((value) & ((divisor) -1)))
#define ACPI_DIV_2(a) _ACPI_DIV(a, 1)
#define ACPI_MUL_2(a) _ACPI_MUL(a, 1)
/*
* Rounding macros (Power of two boundaries only)
*/
-#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \
- (~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \
+ (~(((acpi_size) boundary)-1)))
-#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \
- (((acpi_size) boundary)-1)) & \
- (~(((acpi_size) boundary)-1)))
+#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \
+ (((acpi_size) boundary)-1)) & \
+ (~(((acpi_size) boundary)-1)))
/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
#define ACPI_ROUND_UP_TO(value, boundary) (((value) + ((boundary)-1)) / (boundary))
-#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1))
+#define ACPI_IS_MISALIGNED(value) (((acpi_size) value) & (sizeof(acpi_size)-1))
/*
* Bitmask creation
* Ascii error messages can be configured out
*/
#ifndef ACPI_NO_ERROR_MESSAGES
-
/*
* Error reporting. Callers module and line number are inserted by AE_INFO,
* the plist contains a set of parens to allow variable-length lists.
#define ACPI_WARN_PREDEFINED(plist)
#define ACPI_INFO_PREDEFINED(plist)
-#endif /* ACPI_NO_ERROR_MESSAGES */
+#endif /* ACPI_NO_ERROR_MESSAGES */
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG_OUTPUT
-
/*
* Function entry tracing
*/
-#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE
-
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a, b) ACPI_FUNCTION_NAME(a) \
#endif /* ACPI_SIMPLE_RETURN_MACROS */
-#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)
-#define ACPI_FUNCTION_TRACE_U32(a,b)
-#define ACPI_FUNCTION_TRACE_STR(a,b)
-#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_ENTRY()
-
-#define return_VOID return
-#define return_ACPI_STATUS(s) return(s)
-#define return_VALUE(s) return(s)
-#define return_UINT8(s) return(s)
-#define return_UINT32(s) return(s)
-#define return_PTR(s) return(s)
-
-#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
/* Conditional execution */
#define ACPI_DEBUG_EXEC(a) a
-#define ACPI_NORMAL_EXEC(a)
-
-#define ACPI_DEBUG_DEFINE(a) a;
#define ACPI_DEBUG_ONLY_MEMBERS(a) a;
#define _VERBOSE_STRUCTURES
-/* Stack and buffer dumping */
+/* Various object display routines for debug */
#define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a), 0)
-#define ACPI_DUMP_OPERANDS(a, b, c) acpi_ex_dump_operands(a, b, c)
-
+#define ACPI_DUMP_OPERANDS(a, b ,c) acpi_ex_dump_operands(a, b, c)
#define ACPI_DUMP_ENTRY(a, b) acpi_ns_dump_entry (a, b)
#define ACPI_DUMP_PATHNAME(a, b, c, d) acpi_ns_dump_pathname(a, b, c, d)
-#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a)
-#define ACPI_DUMP_BUFFER(a, b) acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
+#define ACPI_DUMP_BUFFER(a, b) acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
#else
/*
* leaving no executable debug code!
*/
#define ACPI_DEBUG_EXEC(a)
-#define ACPI_NORMAL_EXEC(a) a;
-
-#define ACPI_DEBUG_DEFINE(a) do { } while(0)
-#define ACPI_DEBUG_ONLY_MEMBERS(a) do { } while(0)
-#define ACPI_FUNCTION_TRACE(a) do { } while(0)
-#define ACPI_FUNCTION_TRACE_PTR(a, b) do { } while(0)
-#define ACPI_FUNCTION_TRACE_U32(a, b) do { } while(0)
-#define ACPI_FUNCTION_TRACE_STR(a, b) do { } while(0)
-#define ACPI_FUNCTION_EXIT do { } while(0)
-#define ACPI_FUNCTION_STATUS_EXIT(s) do { } while(0)
-#define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0)
-#define ACPI_FUNCTION_ENTRY() do { } while(0)
-#define ACPI_DUMP_STACK_ENTRY(a) do { } while(0)
-#define ACPI_DUMP_OPERANDS(a, b, c) do { } while(0)
-#define ACPI_DUMP_ENTRY(a, b) do { } while(0)
-#define ACPI_DUMP_TABLES(a, b) do { } while(0)
-#define ACPI_DUMP_PATHNAME(a, b, c, d) do { } while(0)
-#define ACPI_DUMP_RESOURCE_LIST(a) do { } while(0)
-#define ACPI_DUMP_BUFFER(a, b) do { } while(0)
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
+#define ACPI_FUNCTION_TRACE(a)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)
+#define ACPI_FUNCTION_TRACE_U32(a, b)
+#define ACPI_FUNCTION_TRACE_STR(a, b)
+#define ACPI_FUNCTION_EXIT
+#define ACPI_FUNCTION_STATUS_EXIT(s)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
+#define ACPI_FUNCTION_ENTRY()
+#define ACPI_DUMP_STACK_ENTRY(a)
+#define ACPI_DUMP_OPERANDS(a, b, c)
+#define ACPI_DUMP_ENTRY(a, b)
+#define ACPI_DUMP_TABLES(a, b)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)
+#define ACPI_DUMP_BUFFER(a, b)
+#define ACPI_DEBUG_PRINT(pl)
+#define ACPI_DEBUG_PRINT_RAW(pl)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
#define ACPI_DEBUGGER_EXEC(a)
#endif
-#ifdef ACPI_DEBUG_OUTPUT
-/*
- * 1) Set name to blanks
- * 2) Copy the object name
- */
-#define ACPI_ADD_OBJECT_NAME(a,b) ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
- ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
-#else
-
-#define ACPI_ADD_OBJECT_NAME(a,b)
-#endif
-
/*
* Memory allocation tracking (DEBUG ONLY)
*/
/* Memory allocation */
#ifndef ACPI_ALLOCATE
-#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size) (a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_ALLOCATE_ZEROED
-#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size) (a), ACPI_MEM_PARAMETERS)
#endif
#ifndef ACPI_FREE
-#define ACPI_FREE(a) acpio_os_free(a)
+#define ACPI_FREE(a) acpi_os_free(a)
#endif
#define ACPI_MEM_TRACKING(a)
/* Memory allocation */
-#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
-#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
#define ACPI_FREE(a) acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
#define ACPI_MEM_TRACKING(a) a
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
-/* Preemption point */
-#ifndef ACPI_PREEMPTION_POINT
-#define ACPI_PREEMPTION_POINT() /* no preemption */
-#endif
+/*
+ * Macros used for ACPICA utilities only
+ */
+
+/* Generate a UUID */
+
+#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+ (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+ (b) & 0xFF, ((b) >> 8) & 0xFF, \
+ (c) & 0xFF, ((c) >> 8) & 0xFF, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+
+#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
#endif /* ACMACROS_H */
-
/******************************************************************************
*
* Name: acobject.h - Definition of union acpi_operand_object (Internal object only)
union acpi_operand_object *mutex;
u8 *aml_start;
union {
- ACPI_INTERNAL_METHOD implementation;
+ acpi_internal_method implementation;
union acpi_operand_object *handler;
} dispatch;
/******************************************************************************
*
- * Objects that can be notified. All share a common notify_info area.
+ * Objects that can be notified. All share a common notify_info area.
*
*****************************************************************************/
/******************************************************************************
*
- * Fields. All share a common header/info field.
+ * Fields. All share a common header/info field.
*
*****************************************************************************/
#define _UNK 0x6B
/*
- * Reserved ASCII characters. Do not use any of these for
+ * Reserved ASCII characters. Do not use any of these for
* internal opcodes, since they are used to differentiate
* name strings from AML opcodes
*/
#define _PFX 0x6D
/*
- * All AML opcodes and the parse-time arguments for each. Used by the AML
+ * All AML opcodes and the parse-time arguments for each. Used by the AML
* parser Each list is compressed into a 32-bit number and stored in the
* master opcode table (in psopcode.c).
*/
#define ARGP_ZERO_OP ARG_NONE
/*
- * All AML opcodes and the runtime arguments for each. Used by the AML
+ * All AML opcodes and the runtime arguments for each. Used by the AML
* interpreter Each list is compressed into a 32-bit number and stored
* in the master opcode table (in psopcode.c).
*
void
acpi_ps_pop_scope(struct acpi_parse_state *parser_state,
- union acpi_parse_object **op,
- u32 * arg_list, u32 * arg_count);
+ union acpi_parse_object **op, u32 *arg_list, u32 *arg_count);
acpi_status
acpi_ps_push_scope(struct acpi_parse_state *parser_state,
* is saved here (rather than in a separate table) in order to minimize the
* overall size of the stored data.
*/
-static const union acpi_predefined_info predefined_names[] =
-{
+static const union acpi_predefined_info predefined_names[] = {
{{"_AC0", 0, ACPI_RTYPE_INTEGER}},
{{"_AC1", 0, ACPI_RTYPE_INTEGER}},
{{"_AC2", 0, ACPI_RTYPE_INTEGER}},
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
+ {{"_WAK", 1,
+ ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
/* _WDG/_WED are MS extensions defined by "Windows Instrumentation" */
};
#if 0
+
/* This is an internally implemented control method, no need to check */
- {{"_OSI", 1, ACPI_RTYPE_INTEGER}},
+{ {
+"_OSI", 1, ACPI_RTYPE_INTEGER}},
/* TBD: */
-
_PRT - currently ignore reversed entries. attempt to fix here?
think about possibly fixing package elements like _BIF, etc.
#endif
****************************************************************************/
/*
- * Walk state - current state of a parse tree walk. Used for both a leisurely
+ * Walk state - current state of a parse tree walk. Used for both a leisurely
* stroll through the tree (for whatever reason), and for control method
* execution.
*/
extern const char *acpi_gbl_trs_decode[];
extern const char *acpi_gbl_ttp_decode[];
extern const char *acpi_gbl_typ_decode[];
+extern const char *acpi_gbl_ppc_decode[];
+extern const char *acpi_gbl_ior_decode[];
+extern const char *acpi_gbl_dts_decode[];
+extern const char *acpi_gbl_ct_decode[];
+extern const char *acpi_gbl_sbt_decode[];
+extern const char *acpi_gbl_am_decode[];
+extern const char *acpi_gbl_sm_decode[];
+extern const char *acpi_gbl_wm_decode[];
+extern const char *acpi_gbl_cph_decode[];
+extern const char *acpi_gbl_cpo_decode[];
+extern const char *acpi_gbl_dp_decode[];
+extern const char *acpi_gbl_ed_decode[];
+extern const char *acpi_gbl_bpb_decode[];
+extern const char *acpi_gbl_sb_decode[];
+extern const char *acpi_gbl_fc_decode[];
+extern const char *acpi_gbl_pt_decode[];
#endif
/* Types for Resource descriptor entries */
#define ACPI_SMALL_VARIABLE_LENGTH 3
typedef
-acpi_status(*acpi_walk_aml_callback) (u8 * aml,
+acpi_status(*acpi_walk_aml_callback) (u8 *aml,
u32 length,
u32 offset,
u8 resource_index, void **context);
typedef
acpi_status(*acpi_pkg_callback) (u8 object_type,
- union acpi_operand_object * source_object,
+ union acpi_operand_object *source_object,
union acpi_generic_state * state,
void *context);
#define ACPI_IS_PRINT(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
#define ACPI_IS_ALPHA(c) (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
-#endif /* ACPI_USE_SYSTEM_CLIBRARY */
+#endif /* !ACPI_USE_SYSTEM_CLIBRARY */
+
+#define ACPI_IS_ASCII(c) ((c) < 0x80)
/*
* utcopy - Object construction and conversion interfaces
acpi_status
acpi_ut_build_simple_object(union acpi_operand_object *obj,
union acpi_object *user_obj,
- u8 * data_space, u32 * buffer_space_used);
+ u8 *data_space, u32 *buffer_space_used);
acpi_status
acpi_ut_build_package_object(union acpi_operand_object *obj,
- u8 * buffer, u32 * space_used);
+ u8 *buffer, u32 *space_used);
acpi_status
acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj,
const char *function_name,
const char *module_name, u32 component_id, u8 *ptr);
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id);
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display);
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 offset);
void acpi_ut_report_error(char *module_name, u32 line_number);
*/
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id);
+ struct acpi_pnp_device_id ** return_id);
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id);
+ struct acpi_pnp_device_id ** return_id);
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+ struct acpi_pnp_device_id **return_id);
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
- struct acpica_device_id_list **return_cid_list);
+ struct acpi_pnp_device_id_list ** return_cid_list);
/*
* utlock - reader/writer locks
void acpi_ut_strupr(char *src_string);
+void acpi_ut_strlwr(char *src_string);
+
+int acpi_ut_stricmp(char *string1, char *string2);
+
void acpi_ut_print_string(char *string, u8 max_length);
u8 acpi_ut_valid_acpi_name(u32 name);
-acpi_name acpi_ut_repair_name(char *name);
+void acpi_ut_repair_name(char *name);
u8 acpi_ut_valid_acpi_char(char character, u32 position);
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
/* Values for Base above (16=Hex, 10=Decimal) */
* utresrc
*/
acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
+acpi_ut_walk_aml_resources(u8 *aml,
acpi_size aml_length,
acpi_walk_aml_callback user_function,
void **context);
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
+acpi_status acpi_ut_validate_resource(void *aml, u8 *return_index);
u32 acpi_ut_get_descriptor_length(void *aml);
u8 acpi_ut_get_resource_type(void *aml);
acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc,
- u8 ** end_tag);
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
/*
* utmutex - mutex support
-
/******************************************************************************
*
* Module Name: amlresrc.h - AML resource descriptors
/*
* Get the return value and save as the last result
- * value. This is the only place where walk_state->return_desc
+ * value. This is the only place where walk_state->return_desc
* is set to anything other than zero!
*/
walk_state->return_desc = walk_state->operands[0];
*
* RETURN: Status
*
- * DESCRIPTION: Process all named fields in a field declaration. Names are
+ * DESCRIPTION: Process all named fields in a field declaration. Names are
* entered into the namespace.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
+ * DESCRIPTION: Prepare a method for execution. Parses the method if necessary,
* increments the thread count, and waits at the method semaphore
* for clearance to execute.
*
* RETURN: Status
*
* DESCRIPTION: Restart a method that was preempted by another (nested) method
- * invocation. Handle the return value (if any) from the callee.
+ * invocation. Handle the return value (if any) from the callee.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Terminate a control method. Delete everything that the method
+ * DESCRIPTION: Terminate a control method. Delete everything that the method
* created, delete all locals and arguments, and delete the parse
* tree if requested.
*
* RETURN: Status
*
* DESCRIPTION: Initialize the data structures that hold the method's arguments
- * and locals. The data struct is an array of namespace nodes for
+ * and locals. The data struct is an array of namespace nodes for
* each - this allows ref_of and de_ref_of to work properly for these
* special data types.
*
*
* RETURN: None
*
- * DESCRIPTION: Delete method locals and arguments. Arguments are only
+ * DESCRIPTION: Delete method locals and arguments. Arguments are only
* deleted if this method was called from another method.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
+ * DESCRIPTION: Initialize arguments for a method. The parameter list is a list
* of ACPI operand objects, either null terminated or whose length
* is defined by max_param_count.
*
* This means that either 1) The expected argument was
* not passed to the method, or 2) A local variable
* was referenced by the method (via the ASL)
- * before it was initialized. Either case is an error.
+ * before it was initialized. Either case is an error.
*/
/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
*
* RETURN: None
*
- * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
+ * DESCRIPTION: Delete the entry at Opcode:Index. Inserts
* a null into the stack slot after the object is deleted.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
+ * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed
* as the new value for the Arg or Local and the reference count
* for obj_desc is incremented.
*
/*
* If the reference count on the object is more than one, we must
- * take a copy of the object before we store. A reference count
+ * take a copy of the object before we store. A reference count
* of exactly 1 means that the object was just created during the
* evaluation of an expression, and we can safely use it since it
* is not used anywhere else.
/*
* Second arg is the buffer data (optional) byte_list can be either
- * individual bytes or a string initializer. In either case, a
+ * individual bytes or a string initializer. In either case, a
* byte_list appears in the AML.
*/
arg = op->common.value.arg; /* skip first arg */
/*
* Because of the execution pass through the non-control-method
- * parts of the table, we can arrive here twice. Only init
+ * parts of the table, we can arrive here twice. Only init
* the named object node the first time through
*/
if (acpi_ns_get_attached_object(node)) {
* RETURN: Status
*
* DESCRIPTION: Initialize a namespace object from a parser Op and its
- * associated arguments. The namespace object is a more compact
+ * associated arguments. The namespace object is a more compact
* representation of the Op and its arguments.
*
******************************************************************************/
((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
(op->common.parent->common.aml_opcode !=
AML_VAR_PACKAGE_OP)
- && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+ && (op->common.parent->common.aml_opcode !=
+ AML_NAME_OP))) {
walk_state->result_obj = obj_desc;
}
}
*
* RETURN: None.
*
- * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
+ * DESCRIPTION: Clear and remove a reference on an implicit return value. Used
* to delete "stale" return values (if enabled, the return value
* from every operator is saved at least momentarily, in case the
* parent method exits.)
*
* DESCRIPTION: Implements the optional "implicit return". We save the result
* of every ASL operator and control method invocation in case the
- * parent method exit. Before storing a new return value, we
+ * parent method exit. Before storing a new return value, we
* delete the previous return value.
*
******************************************************************************/
*
* If there is no parent, or the parent is a scope_op, we are executing
* at the method level. An executing method typically has no parent,
- * since each method is parsed separately. A method invoked externally
+ * since each method is parsed separately. A method invoked externally
* via execute_control_method has a scope_op as the parent.
*/
if ((!op->common.parent) ||
}
/*
- * Decide what to do with the result based on the parent. If
+ * Decide what to do with the result based on the parent. If
* the parent opcode will not use the result, delete the object.
* Otherwise leave it as is, it will be deleted when it is used
* as an operand later.
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
AML_BANK_FIELD_OP)) {
/*
* These opcodes allow term_arg(s) as operands and therefore
- * the operands can be method calls. The result is used.
+ * the operands can be method calls. The result is used.
*/
goto result_used;
}
*
* RETURN: Status
*
- * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
+ * DESCRIPTION: Used after interpretation of an opcode. If there is an internal
* result descriptor, check if the parent opcode will actually use
- * this result. If not, delete the result now so that it will
+ * this result. If not, delete the result now so that it will
* not become orphaned.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Resolve all operands to their values. Used to prepare
+ * DESCRIPTION: Resolve all operands to their values. Used to prepare
* arguments to a control method invocation (a call from one
* method to another.)
*
/*
* Attempt to resolve each of the valid operands
- * Method arguments are passed by reference, not by value. This means
+ * Method arguments are passed by reference, not by value. This means
* that the actual objects are passed, not copies of the objects.
*/
for (i = 0; i < walk_state->num_operands; i++) {
* RETURN: Status
*
* DESCRIPTION: Translate a parse tree object that is an argument to an AML
- * opcode to the equivalent interpreter object. This may include
+ * opcode to the equivalent interpreter object. This may include
* looking up a name or entering a new name into the internal
* namespace.
*
/*
* Special handling for buffer_field declarations. This is a deferred
* opcode that unfortunately defines the field name as the last
- * parameter instead of the first. We get here when we are performing
+ * parameter instead of the first. We get here when we are performing
* the deferred execution, so the actual name of the field is already
- * in the namespace. We don't want to attempt to look it up again
+ * in the namespace. We don't want to attempt to look it up again
* because we may be executing in a different scope than where the
* actual opcode exists.
*/
* indicate this to the interpreter, set the
* object to the root
*/
- obj_desc = ACPI_CAST_PTR(union
+ obj_desc =
+ ACPI_CAST_PTR(union
acpi_operand_object,
acpi_gbl_root_node);
status = AE_OK;
/*
* If the name is null, this means that this is an
* optional result parameter that was not specified
- * in the original ASL. Create a Zero Constant for a
- * placeholder. (Store to a constant is a Noop.)
+ * in the original ASL. Create a Zero Constant for a
+ * placeholder. (Store to a constant is a Noop.)
*/
opcode = AML_ZERO_OP; /* Has no arguments! */
/*
* Dispatch table for opcode classes
*/
-static ACPI_EXECUTE_OP acpi_gbl_op_type_dispatch[] = {
+static acpi_execute_op acpi_gbl_op_type_dispatch[] = {
acpi_ex_opcode_0A_0T_1R,
acpi_ex_opcode_1A_0T_0R,
acpi_ex_opcode_1A_0T_1R,
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the execution of control
- * methods. This is where most operators and operands are
+ * methods. This is where most operators and operands are
* dispatched to the interpreter.
*
****************************************************************************/
if (walk_state->walk_type & ACPI_WALK_METHOD) {
/*
* Found a named object declaration during method execution;
- * we must enter this object into the namespace. The created
+ * we must enter this object into the namespace. The created
* object is temporary and will be deleted upon completion of
* the execution of this method.
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the execution of control
- * methods. The only thing we really need to do here is to
+ * methods. The only thing we really need to do here is to
* notice the beginning of IF, ELSE, and WHILE blocks.
*
****************************************************************************/
if (ACPI_SUCCESS(status)) {
/*
* Dispatch the request to the appropriate interpreter handler
- * routine. There is one routine per opcode "type" based upon the
+ * routine. There is one routine per opcode "type" based upon the
* number of opcode arguments and return type.
*/
status =
acpi_ut_get_type_name(node->type),
acpi_ut_get_node_name(node)));
- return (AE_AML_OPERAND_TYPE);
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
region_space,
walk_state);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
acpi_ex_exit_interpreter();
ACPI_MODULE_NAME("dswstate")
/* Local prototypes */
-static acpi_status acpi_ds_result_stack_push(struct acpi_walk_state *ws);
-static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws);
+static acpi_status
+acpi_ds_result_stack_push(struct acpi_walk_state *walk_state);
+static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state);
/*******************************************************************************
*
*
* RETURN: Status
*
- * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
+ * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT
* deleted by this routine.
*
******************************************************************************/
* RETURN: A walk_state object popped from the thread's stack
*
* DESCRIPTION: Remove and return the walkstate object that is at the head of
- * the walk stack for the given walk list. NULL indicates that
+ * the walk stack for the given walk list. NULL indicates that
* the list is empty.
*
******************************************************************************/
*
* RETURN: Pointer to the new walk state.
*
- * DESCRIPTION: Allocate and initialize a new walk state. The current walk
+ * DESCRIPTION: Allocate and initialize a new walk state. The current walk
* state is set to this new state.
*
******************************************************************************/
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
- *origin, union acpi_operand_object
- *method_desc, struct acpi_thread_state
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
+ union acpi_parse_object
+ *origin,
+ union acpi_operand_object
+ *method_desc,
+ struct acpi_thread_state
*thread)
{
struct acpi_walk_state *walk_state;
/*
* Setup the current scope.
* Find a Named Op that has a namespace node associated with it.
- * search upwards from this Op. Current scope is the first
+ * search upwards from this Op. Current scope is the first
* Op with a namespace node.
*/
extra_op = parser_state->start_op;
ACPI_FUNCTION_TRACE_PTR(ds_delete_walk_state, walk_state);
if (!walk_state) {
- return;
+ return_VOID;
}
if (walk_state->descriptor_type != ACPI_DESC_TYPE_WALK) {
ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
walk_state));
- return;
+ return_VOID;
}
/* There should not be any open scopes */
/* Set the mask bit only if there are references to this GPE */
if (gpe_event_info->runtime_count) {
- ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
+ ACPI_SET_BIT(gpe_register_info->enable_for_run,
+ (u8)register_bit);
}
return_ACPI_STATUS(AE_OK);
* DESCRIPTION: Clear a GPE of stale events and enable it.
*
******************************************************************************/
-acpi_status
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
}
/* Enable the requested GPE */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
return_ACPI_STATUS(status);
}
*
******************************************************************************/
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
*
******************************************************************************/
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status = AE_OK;
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
- status = acpi_hw_low_set_gpe(gpe_event_info,
+ status =
+ acpi_hw_low_set_gpe(gpe_event_info,
ACPI_GPE_DISABLE);
}
/* A Non-NULL gpe_device means this is a GPE Block Device */
- obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+ obj_desc =
+ acpi_ns_get_attached_object((struct acpi_namespace_node *)
gpe_device);
if (!obj_desc || !obj_desc->device.gpe_block) {
return (NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not enable GPE 0x%02X",
- gpe_index + gpe_block->block_base_number));
+ gpe_index +
+ gpe_block->block_base_number));
continue;
}
gpe_event_info->dispatch.handler = NULL;
gpe_event_info->flags &=
~ACPI_GPE_DISPATCH_MASK;
- } else if ((gpe_event_info->
+ } else
+ if ((gpe_event_info->
flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_NOTIFY) {
/* Install a handler for this PCI root bridge */
- status =
- acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+ status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
if (ACPI_FAILURE(status)) {
if (status == AE_SAME_HANDLER) {
/*
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
- struct acpica_device_id *hid;
- struct acpica_device_id_list *cid;
+ struct acpi_pnp_device_id *hid;
+ struct acpi_pnp_device_id_list *cid;
u32 i;
u8 match;
*
******************************************************************************/
acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
+acpi_install_global_event_handler(acpi_gbl_event_handler handler, void *context)
{
acpi_status status;
if (wake_device == ACPI_ROOT_OBJECT) {
device_node = acpi_gbl_root_node;
} else {
- device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ device_node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
}
/* Validate WakeDevice is of type Device */
*
******************************************************************************/
-acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status
+acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
* the FADT-defined gpe blocks. Otherwise, the GPE block device.
*
******************************************************************************/
-acpi_status
-acpi_get_gpe_device(u32 index, acpi_handle *gpe_device)
+acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
{
struct acpi_gpe_device_info info;
acpi_status status;
string_length--;
}
- return_desc = acpi_ut_create_string_object((acpi_size)
- string_length);
+ return_desc =
+ acpi_ut_create_string_object((acpi_size) string_length);
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
(target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
/*
* Dereference an existing alias so that we don't create a chain
- * of aliases. With this code, we guarantee that an alias is
+ * of aliases. With this code, we guarantee that an alias is
* always exactly one level of indirection away from the
* actual aliased name.
*/
/*
* For objects that can never change (i.e., the NS node will
* permanently point to the same object), we can simply attach
- * the object to the new NS node. For other objects (such as
+ * the object to the new NS node. For other objects (such as
* Integers, buffers, etc.), we have to point the Alias node
* to the original Node.
*/
/*
* The new alias assumes the type of the target, and it points
- * to the same object. The reference count of the object has an
+ * to the same object. The reference count of the object has an
* additional reference to prevent deletion out from under either the
* target node or the alias Node
*/
/* Init object and attach to NS node */
- obj_desc->mutex.sync_level =
- (u8) walk_state->operands[1]->integer.value;
+ obj_desc->mutex.sync_level = (u8)walk_state->operands[1]->integer.value;
obj_desc->mutex.node =
(struct acpi_namespace_node *)walk_state->operands[0];
case ACPI_TYPE_BUFFER:
acpi_os_printf("[0x%.2X]\n", (u32)source_desc->buffer.length);
- acpi_ut_dump_buffer2(source_desc->buffer.pointer,
- (source_desc->buffer.length < 256) ?
- source_desc->buffer.length : 256,
- DB_BYTE_DISPLAY);
+ acpi_ut_dump_buffer(source_desc->buffer.pointer,
+ (source_desc->buffer.length < 256) ?
+ source_desc->buffer.length : 256,
+ DB_BYTE_DISPLAY, 0);
break;
case ACPI_TYPE_STRING:
acpi_os_printf("Table Index 0x%X\n",
source_desc->reference.value);
- return;
+ return_VOID;
default:
break;
ACPI_FUNCTION_NAME(ex_dump_operand)
- if (!((ACPI_LV_EXEC & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_EXEC & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return;
}
* PARAMETERS: title - Descriptive text
* value - Value to be displayed
*
- * DESCRIPTION: Object dump output formatting functions. These functions
+ * DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
* all in one place for easy modification.
*
ACPI_FUNCTION_ENTRY();
if (!flags) {
- if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_OBJECTS & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return;
}
acpi_os_printf("[Buffer] Length %.2X = ",
obj_desc->buffer.length);
if (obj_desc->buffer.length) {
- acpi_ut_dump_buffer(ACPI_CAST_PTR
- (u8, obj_desc->buffer.pointer),
- obj_desc->buffer.length,
- DB_DWORD_DISPLAY, _COMPONENT);
+ acpi_ut_debug_dump_buffer(ACPI_CAST_PTR
+ (u8,
+ obj_desc->buffer.pointer),
+ obj_desc->buffer.length,
+ DB_DWORD_DISPLAY, _COMPONENT);
} else {
acpi_os_printf("\n");
}
}
if (!flags) {
- if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+ if (!
+ ((ACPI_LV_OBJECTS & acpi_dbg_level)
&& (_COMPONENT & acpi_dbg_layer))) {
return_VOID;
}
*
* RETURN: Status
*
- * DESCRIPTION: Read from a named field. Returns either an Integer or a
+ * DESCRIPTION: Read from a named field. Returns either an Integer or a
* Buffer, depending on the size of the field.
*
******************************************************************************/
* Allocate a buffer for the contents of the field.
*
* If the field is larger than the current integer width, create
- * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
+ * a BUFFER to hold it. Otherwise, use an INTEGER. This allows
* the use of arithmetic operators on the returned value if the
* field size is equal or smaller than an Integer.
*
/* Local prototypes */
static acpi_status
acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
- u32 field_datum_byte_offset,
- u64 *value, u32 read_write);
+ u32 field_datum_byte_offset, u64 *value, u32 read_write);
static u8
acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value);
#endif
/*
- * Validate the request. The entire request from the byte offset for a
+ * Validate the request. The entire request from the byte offset for a
* length of one field datum (access width) must fit within the region.
* (Region length is specified in bytes)
*/
obj_desc->common_field.access_byte_width) {
/*
* This is the case where the access_type (acc_word, etc.) is wider
- * than the region itself. For example, a region of length one
+ * than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
ACPI_ERROR((AE_INFO,
*
* DESCRIPTION: Check if a value is out of range of the field being written.
* Used to check if the values written to Index and Bank registers
- * are out of range. Normally, the value is simply truncated
+ * are out of range. Normally, the value is simply truncated
* to fit the field, but this case is most likely a serious
* coding error in the ASL.
*
*
* RETURN: Status
*
- * DESCRIPTION: Read or Write a single datum of a field. The field_type is
+ * DESCRIPTION: Read or Write a single datum of a field. The field_type is
* demultiplexed here to handle the different types of fields
* (buffer_field, region_field, index_field, bank_field)
*
ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length);
/*
* We must have a buffer that is at least as long as the field
- * we are writing to. This is because individual fields are
+ * we are writing to. This is because individual fields are
* indivisible and partial writes are not supported -- as per
* the ACPI specification.
*/
/*
* Copy the original data to the new buffer, starting
- * at Byte zero. All unused (upper) bytes of the
+ * at Byte zero. All unused (upper) bytes of the
* buffer will be 0.
*/
ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length);
-
/******************************************************************************
*
* Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
ACPI_FUNCTION_TRACE(ex_do_concatenate);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
ACPI_FUNCTION_TRACE(ex_do_logical_op);
/*
- * Convert the second operand if necessary. The first operand
+ * Convert the second operand if necessary. The first operand
* determines the type of the second operand, (See the Data Types
* section of the ACPI 3.0+ specification.) Both object types are
* guaranteed to be either Integer/String/Buffer by the operand
-
/******************************************************************************
*
* Module Name: exmutex - ASL Mutex Acquire/Release functions
ACPI_FUNCTION_TRACE(ex_release_mutex_object);
if (obj_desc->mutex.acquisition_depth == 0) {
- return (AE_NOT_ACQUIRED);
+ return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
/* Match multiple Acquires with multiple Releases */
union acpi_operand_object *next = thread->acquired_mutex_list;
union acpi_operand_object *obj_desc;
- ACPI_FUNCTION_ENTRY();
+ ACPI_FUNCTION_NAME(ex_release_all_mutexes);
/* Traverse the list of owned mutexes, releasing each one */
obj_desc->mutex.next = NULL;
obj_desc->mutex.acquisition_depth = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Force-releasing held mutex: %p\n",
+ obj_desc));
+
/* Release the mutex, special case for Global Lock */
if (obj_desc == acpi_gbl_global_lock_mutex) {
-
/******************************************************************************
*
* Module Name: exnames - interpreter/scanner name load/execute
/* Local prototypes */
static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs);
-static acpi_status
-acpi_ex_name_segment(u8 ** in_aml_address, char *name_string);
+static acpi_status acpi_ex_name_segment(u8 **in_aml_address, char *name_string);
/*******************************************************************************
*
* (-1)==root, 0==none
* num_name_segs - count of 4-character name segments
*
- * RETURN: A pointer to the allocated string segment. This segment must
+ * RETURN: A pointer to the allocated string segment. This segment must
* be deleted by the caller.
*
* DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Bytes from stream:\n"));
- for (index = 0; (index < ACPI_NAME_SIZE)
+ for (index = 0;
+ (index < ACPI_NAME_SIZE)
&& (acpi_ut_valid_acpi_char(*aml_address, 0)); index++) {
char_buf[index] = *aml_address++;
ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "%c\n", char_buf[index]));
-
/******************************************************************************
*
* Module Name: exoparg1 - AML execution - opcodes with 1 argument
}
/*
- * Set result to ONES (TRUE) if Value == 0. Note:
+ * Set result to ONES (TRUE) if Value == 0. Note:
* return_desc->Integer.Value is initially == 0 (FALSE) from above.
*/
if (!operand[0]->integer.value) {
case AML_INCREMENT_OP: /* Increment (Operand) */
/*
- * Create a new integer. Can't just get the base integer and
+ * Create a new integer. Can't just get the base integer and
* increment it because it may be an Arg or Field.
*/
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
/*
* Note: The operand is not resolved at this point because we want to
- * get the associated object, not its value. For example, we don't
+ * get the associated object, not its value. For example, we don't
* want to resolve a field_unit to its value, we want the actual
* field_unit object.
*/
/*
* The type of the base object must be integer, buffer, string, or
- * package. All others are not supported.
+ * package. All others are not supported.
*
* NOTE: Integer is not specifically supported by the ACPI spec,
* but is supported implicitly via implicit operand conversion.
case ACPI_TYPE_PACKAGE:
/*
- * Return the referenced element of the package. We must
+ * Return the referenced element of the package. We must
* add another reference to the referenced object, however.
*/
return_desc =
/*
* Dispatch the notify to the appropriate handler
* NOTE: the request is queued for execution after this method
- * completes. The notify handlers are NOT invoked synchronously
+ * completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*/
-
/******************************************************************************
*
* Module Name: exoparg3 - AML execution - opcodes with 3 arguments
case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */
/*
- * Create the return object. The Source operand is guaranteed to be
+ * Create the return object. The Source operand is guaranteed to be
* either a String or a Buffer, so just use its type.
*/
return_desc = acpi_ut_create_internal_object((operand[0])->
-
/******************************************************************************
*
* Module Name: exoparg6 - AML execution - opcodes with 6 arguments
return (FALSE);
}
- return logical_result;
+ return (logical_result);
}
/*******************************************************************************
* and the next should be examined.
*
* Upon finding a match, the loop will terminate via "break" at
- * the bottom. If it terminates "normally", match_value will be
+ * the bottom. If it terminates "normally", match_value will be
* ACPI_UINT64_MAX (Ones) (its initial value) indicating that no
* match was found.
*/
-
/******************************************************************************
*
* Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
* any_acc keyword.
*
* NOTE: Need to have the region_length in order to check for boundary
- * conditions (end-of-region). However, the region_length is a deferred
- * operation. Therefore, to complete this implementation, the generation
+ * conditions (end-of-region). However, the region_length is a deferred
+ * operation. Therefore, to complete this implementation, the generation
* of this access width must be deferred until the region length has
* been evaluated.
*
* RETURN: Status
*
* DESCRIPTION: Initialize the areas of the field object that are common
- * to the various types of fields. Note: This is very "sensitive"
+ * to the various types of fields. Note: This is very "sensitive"
* code because we are solving the general case for field
* alignment.
*
obj_desc->common_field.bit_length = field_bit_length;
/*
- * Decode the access type so we can compute offsets. The access type gives
+ * Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary byte_alignment (address granularity) of the access.
*
* For any_acc, the access_bit_width is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
- * I/O operation. However, for any_acc, the byte_alignment is always one
+ * I/O operation. However, for any_acc, the byte_alignment is always one
* byte.
*
* For all Buffer Fields, the byte_alignment is always one byte.
/*
* base_byte_offset is the address of the start of the field within the
- * region. It is the byte address of the first *datum* (field-width data
+ * region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
-
/******************************************************************************
*
* Module Name: exregion - ACPI default op_region (address space) handlers
* Perform the memory read or write
*
* Note: For machines that do not support non-aligned transfers, the target
- * address was checked for alignment above. We do not attempt to break the
+ * address was checked for alignment above. We do not attempt to break the
* transfer up into smaller (byte-size) chunks because the AML specifically
* asked for a transfer width that the hardware may require.
*/
-
/******************************************************************************
*
* Module Name: exresnte - AML Interpreter object resolution
* PARAMETERS: object_ptr - Pointer to a location that contains
* a pointer to a NS node, and will receive a
* pointer to the resolved object.
- * walk_state - Current state. Valid only if executing AML
- * code. NULL if simply resolving an object
+ * walk_state - Current state. Valid only if executing AML
+ * code. NULL if simply resolving an object
*
* RETURN: Status
*
*
* Note: for some of the data types, the pointer attached to the Node
* can be either a pointer to an actual internal object or a pointer into the
- * AML stream itself. These types are currently:
+ * AML stream itself. These types are currently:
*
* ACPI_TYPE_INTEGER
* ACPI_TYPE_STRING
ACPI_FUNCTION_TRACE(ex_resolve_node_to_value);
/*
- * The stack pointer points to a struct acpi_namespace_node (Node). Get the
+ * The stack pointer points to a struct acpi_namespace_node (Node). Get the
* object that is attached to the Node.
*/
node = *object_ptr;
-
/******************************************************************************
*
* Module Name: exresolv - AML Interpreter object resolution
*
* RETURN: Status
*
- * DESCRIPTION: Return the base object and type. Traverse a reference list if
+ * DESCRIPTION: Return the base object and type. Traverse a reference list if
* necessary to get to the base object.
*
******************************************************************************/
-
/******************************************************************************
*
* Module Name: exresop - AML Interpreter operand/object resolution
if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) {
/*
* Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
- * objects and thus allow them to be targets. (As per the ACPI
+ * objects and thus allow them to be targets. (As per the ACPI
* specification, a store to a constant is a noop.)
*/
if ((this_type == ACPI_TYPE_INTEGER) &&
if ((opcode == AML_STORE_OP) &&
((*stack_ptr)->common.type ==
ACPI_TYPE_LOCAL_REFERENCE)
- && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) {
+ && ((*stack_ptr)->reference.class ==
+ ACPI_REFCLASS_INDEX)) {
goto next_operand;
}
break;
if (acpi_gbl_enable_interpreter_slack) {
/*
* Enable original behavior of Store(), allowing any and all
- * objects as the source operand. The ACPI spec does not
+ * objects as the source operand. The ACPI spec does not
* allow this, however.
*/
break;
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
acpi_ut_get_object_type_name(source_desc),
source_desc, node));
- /* No conversions for all other types. Just attach the source object */
+ /* No conversions for all other types. Just attach the source object */
status = acpi_ns_attach_object(node, source_desc,
source_desc->common.type);
-
/******************************************************************************
*
* Module Name: exstoren - AML Interpreter object store support,
*
* RETURN: Status, resolved object in source_desc_ptr.
*
- * DESCRIPTION: Resolve an object. If the object is a reference, dereference
+ * DESCRIPTION: Resolve an object. If the object is a reference, dereference
* it and return the actual object in the source_desc_ptr.
*
******************************************************************************/
/*
* Stores into a Field/Region or into a Integer/Buffer/String
- * are all essentially the same. This case handles the
+ * are all essentially the same. This case handles the
* "interchangeable" types Integer, String, and Buffer.
*/
if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
*
* RETURN: Status
*
- * DESCRIPTION: "Store" an object to another object. This may include
+ * DESCRIPTION: "Store" an object to another object. This may include
* converting the source type to the target type (implicit
* conversion), and a copy of the value of the source to
* the target.
* with the input value.
*
* When storing into an object the data is converted to the
- * target object type then stored in the object. This means
+ * target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
* This module allows destination types of Number, String,
* Buffer, and Package.
*
- * Assumes parameters are already validated. NOTE: source_desc
+ * Assumes parameters are already validated. NOTE: source_desc
* resolution (from a reference object) must be performed by
* the caller if necessary.
*
-
/******************************************************************************
*
* Module Name: exstorob - AML Interpreter object store support, store to object
#ifdef ACPI_OBSOLETE_BEHAVIOR
/*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
- * truncated if the string is smaller than the buffer. However, "other"
+ * truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
* standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
/*
* OBSOLETE BEHAVIOR:
* If the original source was a string, we must truncate the buffer,
- * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
+ * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer
* copy must not truncate the original buffer.
*/
if (original_src_type == ACPI_TYPE_STRING) {
-
/******************************************************************************
*
* Module Name: exsystem - Interface to OS services
* RETURN: Status
*
* DESCRIPTION: Implements a semaphore wait with a check to see if the
- * semaphore is available immediately. If it is not, the
+ * semaphore is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Implements a mutex wait with a check to see if the
- * mutex is available immediately. If it is not, the
+ * mutex is available immediately. If it is not, the
* interpreter is released before waiting.
*
******************************************************************************/
* DESCRIPTION: Suspend running thread for specified amount of time.
* Note: ACPI specification requires that Stall() does not
* relinquish the processor, and delays longer than 100 usec
- * should use Sleep() instead. We allow stalls up to 255 usec
+ * should use Sleep() instead. We allow stalls up to 255 usec
* for compatibility with other interpreters and existing BIOSs.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Provides an access point to perform synchronization operations
- * within the AML. This operation is a request to wait for an
+ * within the AML. This operation is a request to wait for an
* event.
*
******************************************************************************/
-
/******************************************************************************
*
* Module Name: exutils - interpreter/scanner utilities
/*
* DEFINE_AML_GLOBALS is tested in amlcode.h
* to determine whether certain global names should be "defined" or only
- * "declared" in the current compilation. This enhances maintainability
+ * "declared" in the current compilation. This enhances maintainability
* by enabling a single header file to embody all knowledge of the names
* in question.
*
* Exactly one module of any executable should #define DEFINE_GLOBALS
- * before #including the header files which use this convention. The
+ * before #including the header files which use this convention. The
* names in question will be defined and initialized in that module,
* and declared as extern in all other modules which #include those
* header files.
-
/******************************************************************************
*
* Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface
*
* RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY
*
- * DESCRIPTION: Return current operating state of system. Determined by
+ * DESCRIPTION: Return current operating state of system. Determined by
* querying the SCI_EN bit.
*
******************************************************************************/
-
/******************************************************************************
*
* Module Name: hwgpe - Low level GPE enable/disable/clear functions
acpi_status
acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
- struct acpi_gpe_block_info *gpe_block, void *context)
+ struct acpi_gpe_block_info * gpe_block,
+ void *context)
{
u32 i;
acpi_status status;
status = acpi_hw_get_pci_device_info(pci_id, info->device,
&bus_number, &is_bridge);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ return (status);
}
info = info->next;
pci_id->segment, pci_id->bus, pci_id->device,
pci_id->function, status, bus_number, is_bridge));
- return_ACPI_STATUS(AE_OK);
+ return (AE_OK);
}
/*******************************************************************************
-
/*******************************************************************************
*
* Module Name: hwregs - Read/write access functions for the various ACPI
-
/******************************************************************************
*
* Name: hwtimer.c - ACPI Power Management Timer Interface
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- status =
- acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
return_ACPI_STATUS(status);
}
* a versatile and accurate timer.
*
* Note that this function accommodates only a single timer
- * rollover. Thus for 24-bit timers, this function should only
+ * rollover. Thus for 24-bit timers, this function should only
* be used for calculating durations less than ~4.6 seconds
* (~20 minutes for 32-bit timers) -- calculations below:
*
-
/******************************************************************************
*
* Module Name: hwvalid - I/O request validation
-
/******************************************************************************
*
* Module Name: hwxface - Public ACPICA hardware interfaces
ACPI_MODULE_NAME("hwxfsleep")
/* Local prototypes */
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
/*
* Dispatch table used to efficiently branch to the various sleep
* function.
*
******************************************************************************/
-static acpi_status
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
{
acpi_status status;
struct acpi_sleep_functions *sleep_functions =
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
- status =
- acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
+ status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
status =
- acpi_hw_sleep_dispatch(sleep_state,
- ACPI_WAKE_PREP_FUNCTION_ID);
+ acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
status = acpi_ns_lookup(NULL, init_val->name, init_val->type,
ACPI_IMODE_LOAD_PASS2,
ACPI_NS_NO_UPSEARCH, NULL, &new_node);
-
- if (ACPI_FAILURE(status) || (!new_node)) { /* Must be on same line for code converter */
+ if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not create predefined name %s",
init_val->name));
+ continue;
}
/*
/* Build an object around the static string */
- obj_desc->string.length =
- (u32) ACPI_STRLEN(val);
+ obj_desc->string.length = (u32)ACPI_STRLEN(val);
obj_desc->string.pointer = val;
obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
break;
*
* RETURN: None.
*
- * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
+ * DESCRIPTION: Delete a subtree of the namespace. This includes all objects
* stored within the subtree.
*
******************************************************************************/
* RETURN: Status
*
* DESCRIPTION: Delete entries within the namespace that are owned by a
- * specific ID. Used to delete entire ACPI tables. All
+ * specific ID. Used to delete entire ACPI tables. All
* reference counts are updated.
*
* MUTEX: Locks namespace during deletion walk.
"Invalid ACPI Object Type 0x%08X", type));
}
- if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
- this_node->name.integer =
- acpi_ut_repair_name(this_node->name.ascii);
-
- ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
- this_node->name.integer));
- }
-
acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
}
*
* PARAMETERS: search_base - Root of subtree to be dumped, or
* NS_ALL to dump the entire namespace
- * max_depth - Maximum depth of dump. Use INT_MAX
+ * max_depth - Maximum depth of dump. Use INT_MAX
* for an effectively unlimited depth.
*
* RETURN: None
/* Walk entire namespace from the supplied root */
status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, acpi_ns_init_one_object, NULL,
- &info, NULL);
+ ACPI_UINT32_MAX, acpi_ns_init_one_object,
+ NULL, &info, NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
}
/*
* Parse the table and load the namespace with all named
- * objects found within. Control methods are NOT parsed
- * at this time. In fact, the control methods cannot be
+ * objects found within. Control methods are NOT parsed
+ * at this time. In fact, the control methods cannot be
* parsed until the entire namespace is loaded, because
* if a control method makes a forward reference (call)
* to another control method, we can't continue parsing
}
/*
- * Now we can parse the control methods. We always parse
+ * Now we can parse the control methods. We always parse
* them here for a sanity check, and if configured for
* just-in-time parsing, we delete the control method
* parse trees.
}
/*
- * Load the namespace. The DSDT is required,
+ * Load the namespace. The DSDT is required,
* but the SSDT and PSDT tables are optional.
*/
status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
* RETURN: Status
*
* DESCRIPTION: Shrinks the namespace, typically in response to an undocking
- * event. Deletes an entire subtree starting from (and
+ * event. Deletes an entire subtree starting from (and
* including) the given handle.
*
******************************************************************************/
ACPI_ERROR((AE_INFO,
"Invalid Namespace Node (%p) while traversing namespace",
next_node));
- return 0;
+ return (0);
}
size += ACPI_PATH_SEGMENT_LENGTH;
next_node = next_node->parent;
* RETURN: Status
*
* DESCRIPTION: Record the given object as the value associated with the
- * name whose acpi_handle is passed. If Object is NULL
+ * name whose acpi_handle is passed. If Object is NULL
* and Type is ACPI_TYPE_ANY, set the name as having no value.
* Note: Future may require that the Node->Flags field be passed
* as a parameter.
((struct acpi_namespace_node *)object)->object) {
/*
* Value passed is a name handle and that name has a
- * non-null value. Use that name's value and type.
+ * non-null value. Use that name's value and type.
*/
obj_desc = ((struct acpi_namespace_node *)object)->object;
object_type = ((struct acpi_namespace_node *)object)->type;
*
* RETURN: Status
*
- * DESCRIPTION: Low-level attach data. Create and attach a Data object.
+ * DESCRIPTION: Low-level attach data. Create and attach a Data object.
*
******************************************************************************/
*
* RETURN: Status
*
- * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
+ * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
* is responsible for the actual data.
*
******************************************************************************/
/*
* AML Parse, pass 1
*
- * In this pass, we load most of the namespace. Control methods
- * are not parsed until later. A parse tree is not created. Instead,
- * each Parser Op subtree is deleted when it is finished. This saves
+ * In this pass, we load most of the namespace. Control methods
+ * are not parsed until later. A parse tree is not created. Instead,
+ * each Parser Op subtree is deleted when it is finished. This saves
* a great deal of memory, and allows a small cache of parse objects
- * to service the entire parse. The second pass of the parse then
+ * to service the entire parse. The second pass of the parse then
* performs another complete parse of the AML.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
* this problem, and we want to be able to enable ACPI support for them,
* even though there are a few bad names.
*/
- if (!acpi_ut_valid_acpi_name(target_name)) {
- target_name =
- acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
-
- /* Report warning only if in strict mode or debug mode */
-
- if (!acpi_gbl_enable_interpreter_slack) {
- ACPI_WARNING((AE_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- ACPI_CAST_PTR(char, &target_name)));
- } else {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found bad character(s) in name, repaired: [%4.4s]\n",
- ACPI_CAST_PTR(char, &target_name)));
- }
- }
+ acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
/* Try to find the name in the namespace level specified by the caller */
((num_segments > 0) ? (num_segments - 1) : 0) + 1;
/*
- * Check to see if we're still in bounds. If not, there's a problem
+ * Check to see if we're still in bounds. If not, there's a problem
* with internal_name (invalid format).
*/
if (required_length > internal_name_length) {
(*converted_name)[j++] = '.';
}
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
- (*converted_name)[j++] = internal_name[names_index++];
+ /* Copy and validate the 4-char name segment */
+
+ ACPI_MOVE_NAME(&(*converted_name)[j],
+ &internal_name[names_index]);
+ acpi_ut_repair_name(&(*converted_name)[j]);
+
+ j += ACPI_NAME_SIZE;
+ names_index += ACPI_NAME_SIZE;
}
}
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
- * root of the name space. If Name is fully
+ * root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
* flags - Used to indicate whether to perform upsearch or
* return_node - Where the Node is returned
*
* DESCRIPTION: Look up a name relative to a given scope and return the
- * corresponding Node. NOTE: Scope can be null.
+ * corresponding Node. NOTE: Scope can be null.
*
* MUTEX: Locks namespace
*
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
* RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if
* none is found.
*
- * DESCRIPTION: Return the next peer node within the namespace. If Handle
- * is valid, Scope is ignored. Otherwise, the first node
+ * DESCRIPTION: Return the next peer node within the namespace. If Handle
+ * is valid, Scope is ignored. Otherwise, the first node
* within Scope is returned.
*
******************************************************************************/
/*
* Depth first search: Attempt to go down another level in the
- * namespace if we are allowed to. Don't go any further if we have
+ * namespace if we are allowed to. Don't go any further if we have
* reached the caller specified maximum depth or if the user
* function has specified that the maximum depth has been reached.
*/
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
* return_type - Expected type of return object
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
* PARAMETERS: handle - Object handle (optional)
* pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
- * terminated by NULL. May be NULL
+ * terminated by NULL. May be NULL
* if no parameters are being passed.
* return_buffer - Where to put method's return value (if
- * any). If NULL, no value is returned.
+ * any). If NULL, no value is returned.
*
* RETURN: Status
*
* DESCRIPTION: Find and evaluate the given object, passing the given
- * parameters if necessary. One of "Handle" or "Pathname" must
+ * parameters if necessary. One of "Handle" or "Pathname" must
* be valid (non-null)
*
******************************************************************************/
acpi_status status;
struct acpi_namespace_node *node;
u32 flags;
- struct acpica_device_id *hid;
- struct acpica_device_id_list *cid;
+ struct acpi_pnp_device_id *hid;
+ struct acpi_pnp_device_id_list *cid;
u32 i;
u8 found;
int no_match;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- return (status);
+ return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(obj_handle);
* DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
* starting (and ending) at the object specified by start_handle.
* The user_function is called whenever an object of type
- * Device is found. If the user function returns
+ * Device is found. If the user function returns
* a non-zero value, the search is terminated immediately and this
* value is returned to the caller.
*
ACPI_MODULE_NAME("nsxfname")
/* Local prototypes */
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
- struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+ struct acpi_pnp_device_id *source,
char *string_area);
/******************************************************************************
* RETURN: Status
*
* DESCRIPTION: This routine will search for a caller specified name in the
- * name space. The caller can restrict the search region by
- * specifying a non NULL parent. The parent value is itself a
+ * name space. The caller can restrict the search region by
+ * specifying a non NULL parent. The parent value is itself a
* namespace handle.
*
******************************************************************************/
* RETURN: Pointer to a string containing the fully qualified Name.
*
* DESCRIPTION: This routine returns the fully qualified name associated with
- * the Handle parameter. This and the acpi_pathname_to_handle are
+ * the Handle parameter. This and the acpi_pathname_to_handle are
* complementary functions.
*
******************************************************************************/
/* Just copy the ACPI name from the Node and zero terminate it */
- ACPI_STRNCPY(buffer->pointer, acpi_ut_get_node_name(node),
- ACPI_NAME_SIZE);
+ ACPI_MOVE_NAME(buffer->pointer, acpi_ut_get_node_name(node));
((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0;
status = AE_OK;
*
* FUNCTION: acpi_ns_copy_device_id
*
- * PARAMETERS: dest - Pointer to the destination DEVICE_ID
- * source - Pointer to the source DEVICE_ID
+ * PARAMETERS: dest - Pointer to the destination PNP_DEVICE_ID
+ * source - Pointer to the source PNP_DEVICE_ID
* string_area - Pointer to where to copy the dest string
*
* RETURN: Pointer to the next string area
*
- * DESCRIPTION: Copy a single DEVICE_ID, including the string data.
+ * DESCRIPTION: Copy a single PNP_DEVICE_ID, including the string data.
*
******************************************************************************/
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
- struct acpica_device_id *source,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
+ struct acpi_pnp_device_id *source,
char *string_area)
{
- /* Create the destination DEVICE_ID */
+
+ /* Create the destination PNP_DEVICE_ID */
dest->string = string_area;
dest->length = source->length;
* namespace node and possibly by running several standard
* control methods (Such as in the case of a device.)
*
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
- * _ADR, _sx_w, and _sx_d methods.
+ * For Device and Processor objects, run the Device _HID, _UID, _CID, _SUB,
+ * _STA, _ADR, _sx_w, and _sx_d methods.
*
* Note: Allocates the return buffer, must be freed by the caller.
*
{
struct acpi_namespace_node *node;
struct acpi_device_info *info;
- struct acpica_device_id_list *cid_list = NULL;
- struct acpica_device_id *hid = NULL;
- struct acpica_device_id *uid = NULL;
+ struct acpi_pnp_device_id_list *cid_list = NULL;
+ struct acpi_pnp_device_id *hid = NULL;
+ struct acpi_pnp_device_id *uid = NULL;
+ struct acpi_pnp_device_id *sub = NULL;
char *next_id_string;
acpi_object_type type;
acpi_name name;
if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
/*
* Get extra info for ACPI Device/Processor objects only:
- * Run the Device _HID, _UID, and _CID methods.
+ * Run the Device _HID, _UID, _SUB, and _CID methods.
*
* Note: none of these methods are required, so they may or may
* not be present for this device. The Info->Valid bitfield is used
valid |= ACPI_VALID_UID;
}
+ /* Execute the Device._SUB method */
+
+ status = acpi_ut_execute_SUB(node, &sub);
+ if (ACPI_SUCCESS(status)) {
+ info_size += sub->length;
+ valid |= ACPI_VALID_SUB;
+ }
+
/* Execute the Device._CID method */
status = acpi_ut_execute_CID(node, &cid_list);
info_size +=
(cid_list->list_size -
- sizeof(struct acpica_device_id_list));
+ sizeof(struct acpi_pnp_device_id_list));
valid |= ACPI_VALID_CID;
}
}
next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids);
if (cid_list) {
- /* Point past the CID DEVICE_ID array */
+ /* Point past the CID PNP_DEVICE_ID array */
next_id_string +=
((acpi_size) cid_list->count *
- sizeof(struct acpica_device_id));
+ sizeof(struct acpi_pnp_device_id));
}
/*
- * Copy the HID, UID, and CIDs to the return buffer. The variable-length
- * strings are copied to the reserved area at the end of the buffer.
+ * Copy the HID, UID, SUB, and CIDs to the return buffer.
+ * The variable-length strings are copied to the reserved area
+ * at the end of the buffer.
*
* For HID and CID, check if the ID is a PCI Root Bridge.
*/
uid, next_id_string);
}
+ if (sub) {
+ next_id_string = acpi_ns_copy_device_id(&info->subsystem_id,
+ sub, next_id_string);
+ }
+
if (cid_list) {
info->compatible_id_list.count = cid_list->count;
info->compatible_id_list.list_size = cid_list->list_size;
if (uid) {
ACPI_FREE(uid);
}
+ if (sub) {
+ ACPI_FREE(sub);
+ }
if (cid_list) {
ACPI_FREE(cid_list);
}
*
* RETURN: Status
*
- * DESCRIPTION: Return the next peer object within the namespace. If Handle is
- * valid, Scope is ignored. Otherwise, the first object within
+ * DESCRIPTION: Return the next peer object within the namespace. If Handle is
+ * valid, Scope is ignored. Otherwise, the first object within
* Scope is returned.
*
******************************************************************************/
* RETURN: Pointer to end-of-package +1
*
* DESCRIPTION: Get next package length and return a pointer past the end of
- * the package. Consumes the package length field
+ * the package. Consumes the package length field
*
******************************************************************************/
* RETURN: Pointer to the start of the name string (pointer points into
* the AML.
*
- * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
- * prefix characters. Set parser state to point past the string.
+ * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
+ * prefix characters. Set parser state to point past the string.
* (Name is consumed from the AML.)
*
******************************************************************************/
*
* DESCRIPTION: Get next name (if method call, return # of required args).
* Names are looked up in the internal namespace to determine
- * if the name represents a control method. If a method
+ * if the name represents a control method. If a method
* is found, the number of arguments to the method is returned.
* This information is critical for parsing to continue correctly.
*
case AML_CLASS_UNKNOWN:
- /* The opcode is unrecognized. Just skip unknown opcodes */
+ /* The opcode is unrecognized. Complain and skip unknown opcodes */
- ACPI_ERROR((AE_INFO,
- "Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
- walk_state->opcode, walk_state->parser_state.aml,
- walk_state->aml_offset));
+ if (walk_state->pass_number == 2) {
+ ACPI_ERROR((AE_INFO,
+ "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header))));
- ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+ ACPI_DUMP_BUFFER(walk_state->parser_state.aml - 16, 48);
- /* Assume one-byte bad opcode */
+#ifdef ACPI_ASL_COMPILER
+ /*
+ * This is executed for the disassembler only. Output goes
+ * to the disassembled ASL output file.
+ */
+ acpi_os_printf
+ ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+ walk_state->opcode,
+ (u32)(walk_state->aml_offset +
+ sizeof(struct acpi_table_header)));
+
+ /* Dump the context surrounding the invalid opcode */
+
+ acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+ aml - 16), 48, DB_BYTE_DISPLAY,
+ walk_state->aml_offset +
+ sizeof(struct acpi_table_header) -
+ 16);
+ acpi_os_printf(" */\n");
+#endif
+ }
+
+ /* Increment past one-byte or two-byte opcode */
walk_state->parser_state.aml++;
+ if (walk_state->opcode > 0xFF) { /* Can only happen if first byte is 0x5B */
+ walk_state->parser_state.aml++;
+ }
+
return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
default:
if ((op_info->class ==
AML_CLASS_EXECUTE) && (!arg)) {
ACPI_WARNING((AE_INFO,
- "Detected an unsupported executable opcode "
- "at module-level: [0x%.4X] at table offset 0x%.4X",
- op->common.aml_opcode,
- (u32)((aml_op_start - walk_state->parser_state.aml_start)
- + sizeof(struct acpi_table_header))));
+ "Unsupported module-level executable opcode "
+ "0x%.2X at table offset 0x%.4X",
+ op->common.
+ aml_opcode,
+ (u32)
+ (ACPI_PTR_DIFF
+ (aml_op_start,
+ walk_state->
+ parser_state.
+ aml_start) +
+ sizeof(struct
+ acpi_table_header))));
}
}
break;
*op = NULL;
}
- ACPI_PREEMPTION_POINT();
-
return_ACPI_STATUS(AE_OK);
}
*
* DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands>
* The name is a simple ascii string, the operand specifier is an
- * ascii string with one letter per operand. The letter specifies
+ * ascii string with one letter per operand. The letter specifies
* the operand type.
*
******************************************************************************/
******************************************************************************/
/*
- * Master Opcode information table. A summary of everything we know about each
+ * Master Opcode information table. A summary of everything we know about each
* opcode, all in one place.
*/
const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+ AML_CONSTANT),
/* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
- AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+ AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+ AML_CONSTANT),
/* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
AML_NSNODE | AML_NAMED | AML_DEFER),
/* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD),
/* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
/* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD),
/* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
- ACPI_TYPE_LOCAL_BANK_FIELD, AML_CLASS_NAMED_OBJECT,
- AML_TYPE_NAMED_FIELD,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD |
- AML_DEFER),
+ ACPI_TYPE_LOCAL_BANK_FIELD,
+ AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_FIELD | AML_DEFER),
/* Internal opcodes that map to invalid AML opcodes */
/* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
- AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
+ AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+ AML_NSNODE),
/* ACPI 3.0 opcodes */
/*
* This table is indexed by the second opcode of the extended opcode
- * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
+ * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
*/
static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
/* 0 1 2 3 4 5 6 7 */
/*
* Parse the AML and build an operation tree as most interpreters,
- * like Perl, do. Parsing is done by hand rather than with a YACC
+ * like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
- * usage. At the same time, parsing is kept flexible and the code
+ * usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
- * opcode. In both cases, we do not execute the rest of the
+ * opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
/* Executing a control method - additional cleanup */
- acpi_ds_terminate_control_method(
- walk_state->method_desc, walk_state);
+ acpi_ds_terminate_control_method(walk_state->
+ method_desc,
+ walk_state);
}
acpi_ds_delete_walk_state(walk_state);
acpi_gbl_current_walk_list = thread;
/*
- * Execute the walk loop as long as there is a valid Walk State. This
+ * Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
* RETURN: Pointer to the new Op, null on failure
*
* DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on
- * opcode. A cache of opcodes is available for the pure
+ * opcode. A cache of opcodes is available for the pure
* GENERIC_OP, since this is by far the most commonly used.
*
******************************************************************************/
*
* RETURN: None.
*
- * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
+ * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list
* or actually free it.
*
******************************************************************************/
* Get the number of vendor data bytes
*/
extra_struct_bytes = resource_length;
+
+ /*
+ * There is already one byte included in the minimum
+ * descriptor size. If there are extra struct bytes,
+ * subtract one from the count.
+ */
+ if (extra_struct_bytes) {
+ extra_struct_bytes--;
+ }
break;
case ACPI_RESOURCE_NAME_END_TAG:
/*
* Calculate the size of the return buffer.
* The base size is the number of elements * the sizes of the
- * structures. Additional space for the strings is added below.
+ * structures. Additional space for the strings is added below.
* The minus one is to subtract the size of the u8 Source[1]
* member because it is added below.
*
(*sub_object_list)->string.
length + 1);
} else {
- temp_size_needed +=
- acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+ temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
}
} else {
/*
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource_index));
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
/* Convert the AML byte stream resource to a local resource struct */
ACPI_ERROR((AE_INFO,
"Invalid/unsupported resource descriptor: Type 0x%2.2X",
resource->type));
- return (AE_AML_INVALID_RESOURCE_TYPE);
+ return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
}
status = acpi_rs_convert_resource_to_aml(resource,
/* Normalize the input strings */
ACPI_MEMSET(&header, 0, sizeof(struct acpi_table_header));
- ACPI_STRNCPY(header.signature, signature, ACPI_NAME_SIZE);
+ ACPI_MOVE_NAME(header.signature, signature);
ACPI_STRNCPY(header.oem_id, oem_id, ACPI_OEM_ID_SIZE);
ACPI_STRNCPY(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ return_VOID;
}
/*******************************************************************************
sum = (u8) (sum + *(buffer++));
}
- return sum;
+ return (sum);
}
/*******************************************************************************
sizeof(struct
acpi_table_header));
if (!header) {
- return AE_NO_MEMORY;
+ return (AE_NO_MEMORY);
}
ACPI_MEMCPY(out_table_header, header,
sizeof(struct acpi_table_header));
sizeof(struct
acpi_table_header));
} else {
- return AE_NOT_FOUND;
+ return (AE_NOT_FOUND);
}
} else {
ACPI_MEMCPY(out_table_header,
* DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
* be a valid ACPI table with a valid ACPI table header.
* Note1: Mainly intended to support hotplug addition of SSDTs.
- * Note2: Does not copy the incoming table. User is reponsible
+ * Note2: Does not copy the incoming table. User is responsible
* to ensure that the table is not deleted or unmapped.
*
******************************************************************************/
static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
{
- ACPI_FUNCTION_ENTRY();
/*
* The signature and checksum must both be correct
* RETURN: Status, RSDP physical address
*
* DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
- * pointer structure. If it is found, set *RSDP to point to it.
+ * pointer structure. If it is found, set *RSDP to point to it.
*
* NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: utcache - local cache allocation routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utcache")
+
+#ifdef ACPI_USE_LOCAL_CACHE
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_create_cache
+ *
+ * PARAMETERS: cache_name - Ascii name for the cache
+ * object_size - Size of each cached object
+ * max_depth - Maximum depth of the cache (in objects)
+ * return_cache - Where the new cache object is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a cache object
+ *
+ ******************************************************************************/
+acpi_status
+acpi_os_create_cache(char *cache_name,
+ u16 object_size,
+ u16 max_depth, struct acpi_memory_list ** return_cache)
+{
+ struct acpi_memory_list *cache;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache_name || !return_cache || (object_size < 16)) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /* Create the cache object */
+
+ cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+ if (!cache) {
+ return (AE_NO_MEMORY);
+ }
+
+ /* Populate the cache object and return it */
+
+ ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+ cache->link_offset = 8;
+ cache->list_name = cache_name;
+ cache->object_size = object_size;
+ cache->max_depth = max_depth;
+
+ *return_cache = cache;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_purge_cache
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_purge_cache(struct acpi_memory_list * cache)
+{
+ char *next;
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Walk the list of objects in this cache */
+
+ while (cache->list_head) {
+
+ /* Delete and unlink one cached state object */
+
+ next = *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)cache->
+ list_head)[cache->
+ link_offset])));
+ ACPI_FREE(cache->list_head);
+
+ cache->list_head = next;
+ cache->current_depth--;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_delete_cache
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache and delete the
+ * cache object.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_delete_cache(struct acpi_memory_list * cache)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /* Purge all objects in the cache */
+
+ status = acpi_os_purge_cache(cache);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Now we can delete the cache object */
+
+ acpi_os_free(cache);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_release_object
+ *
+ * PARAMETERS: cache - Handle to cache object
+ * object - The object to be released
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Release an object to the specified cache. If cache is full,
+ * the object is deleted.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_os_release_object(struct acpi_memory_list * cache, void *object)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!cache || !object) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /* If cache is full, just free this object */
+
+ if (cache->current_depth >= cache->max_depth) {
+ ACPI_FREE(object);
+ ACPI_MEM_TRACKING(cache->total_freed++);
+ }
+
+ /* Otherwise put this object back into the cache */
+
+ else {
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Mark the object as cached */
+
+ ACPI_MEMSET(object, 0xCA, cache->object_size);
+ ACPI_SET_DESCRIPTOR_TYPE(object, ACPI_DESC_TYPE_CACHED);
+
+ /* Put the object at the head of the cache list */
+
+ *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)object)[cache->
+ link_offset]))) =
+ cache->list_head;
+ cache->list_head = object;
+ cache->current_depth++;
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ }
+
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_acquire_object
+ *
+ * PARAMETERS: cache - Handle to cache object
+ *
+ * RETURN: the acquired object. NULL on error
+ *
+ * DESCRIPTION: Get an object from the specified cache. If cache is empty,
+ * the object is allocated.
+ *
+ ******************************************************************************/
+
+void *acpi_os_acquire_object(struct acpi_memory_list *cache)
+{
+ acpi_status status;
+ void *object;
+
+ ACPI_FUNCTION_NAME(os_acquire_object);
+
+ if (!cache) {
+ return (NULL);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ ACPI_MEM_TRACKING(cache->requests++);
+
+ /* Check the cache first */
+
+ if (cache->list_head) {
+
+ /* There is an object available, use it */
+
+ object = cache->list_head;
+ cache->list_head = *(ACPI_CAST_INDIRECT_PTR(char,
+ &(((char *)
+ object)[cache->
+ link_offset])));
+
+ cache->current_depth--;
+
+ ACPI_MEM_TRACKING(cache->hits++);
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Object %p from %s cache\n", object,
+ cache->list_name));
+
+ status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ /* Clear (zero) the previously used Object */
+
+ ACPI_MEMSET(object, 0, cache->object_size);
+ } else {
+ /* The cache is empty, create a new object */
+
+ ACPI_MEM_TRACKING(cache->total_allocated++);
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ if ((cache->total_allocated - cache->total_freed) >
+ cache->max_occupied) {
+ cache->max_occupied =
+ cache->total_allocated - cache->total_freed;
+ }
+#endif
+
+ /* Avoid deadlock with ACPI_ALLOCATE_ZEROED */
+
+ status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
+ object = ACPI_ALLOCATE_ZEROED(cache->object_size);
+ if (!object) {
+ return (NULL);
+ }
+ }
+
+ return (object);
+}
+#endif /* ACPI_USE_LOCAL_CACHE */
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: cmclib - Local implementation of C library functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+/*
+ * These implementations of standard C Library routines can optionally be
+ * used if a C library is not available. In general, they are less efficient
+ * than an inline or assembly implementation
+ */
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("cmclib")
+
+#ifndef ACPI_USE_SYSTEM_CLIBRARY
+#define NEGATIVE 1
+#define POSITIVE 0
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memcmp (memcmp)
+ *
+ * PARAMETERS: buffer1 - First Buffer
+ * buffer2 - Second Buffer
+ * count - Maximum # of bytes to compare
+ *
+ * RETURN: Index where Buffers mismatched, or 0 if Buffers matched
+ *
+ * DESCRIPTION: Compare two Buffers, with a maximum length
+ *
+ ******************************************************************************/
+int acpi_ut_memcmp(const char *buffer1, const char *buffer2, acpi_size count)
+{
+
+ return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*buffer1 -
+ (unsigned char)*buffer2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memcpy (memcpy)
+ *
+ * PARAMETERS: dest - Target of the copy
+ * src - Source buffer to copy
+ * count - Number of bytes to copy
+ *
+ * RETURN: Dest
+ *
+ * DESCRIPTION: Copy arbitrary bytes of memory
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count)
+{
+ char *new = (char *)dest;
+ char *old = (char *)src;
+
+ while (count) {
+ *new = *old;
+ new++;
+ old++;
+ count--;
+ }
+
+ return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_memset (memset)
+ *
+ * PARAMETERS: dest - Buffer to set
+ * value - Value to set each byte of memory
+ * count - Number of bytes to set
+ *
+ * RETURN: Dest
+ *
+ * DESCRIPTION: Initialize a buffer to a known value.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memset(void *dest, u8 value, acpi_size count)
+{
+ char *new = (char *)dest;
+
+ while (count) {
+ *new = (char)value;
+ new++;
+ count--;
+ }
+
+ return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlen (strlen)
+ *
+ * PARAMETERS: string - Null terminated string
+ *
+ * RETURN: Length
+ *
+ * DESCRIPTION: Returns the length of the input string
+ *
+ ******************************************************************************/
+
+acpi_size acpi_ut_strlen(const char *string)
+{
+ u32 length = 0;
+
+ /* Count the string until a null is encountered */
+
+ while (*string) {
+ length++;
+ string++;
+ }
+
+ return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcpy (strcpy)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcpy(char *dst_string, const char *src_string)
+{
+ char *string = dst_string;
+
+ /* Move bytes brute force */
+
+ while (*src_string) {
+ *string = *src_string;
+
+ string++;
+ src_string++;
+ }
+
+ /* Null terminate */
+
+ *string = 0;
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncpy (strncpy)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ * count - Maximum # of bytes to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string, with a maximum length
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncpy(char *dst_string, const char *src_string, acpi_size count)
+{
+ char *string = dst_string;
+
+ /* Copy the string */
+
+ for (string = dst_string;
+ count && (count--, (*string++ = *src_string++));) {;
+ }
+
+ /* Pad with nulls if necessary */
+
+ while (count--) {
+ *string = 0;
+ string++;
+ }
+
+ /* Return original pointer */
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcmp (strcmp)
+ *
+ * PARAMETERS: string1 - First string
+ * string2 - Second string
+ *
+ * RETURN: Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings
+ *
+ ******************************************************************************/
+
+int acpi_ut_strcmp(const char *string1, const char *string2)
+{
+
+ for (; (*string1 == *string2); string2++) {
+ if (!*string1++) {
+ return (0);
+ }
+ }
+
+ return ((unsigned char)*string1 - (unsigned char)*string2);
+}
+
+#ifdef ACPI_FUTURE_IMPLEMENTATION
+/* Not used at this time */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strchr (strchr)
+ *
+ * PARAMETERS: string - Search string
+ * ch - character to search for
+ *
+ * RETURN: Ptr to char or NULL if not found
+ *
+ * DESCRIPTION: Search a string for a character
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strchr(const char *string, int ch)
+{
+
+ for (; (*string); string++) {
+ if ((*string) == (char)ch) {
+ return ((char *)string);
+ }
+ }
+
+ return (NULL);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncmp (strncmp)
+ *
+ * PARAMETERS: string1 - First string
+ * string2 - Second string
+ * count - Maximum # of bytes to compare
+ *
+ * RETURN: Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings, with a maximum length
+ *
+ ******************************************************************************/
+
+int acpi_ut_strncmp(const char *string1, const char *string2, acpi_size count)
+{
+
+ for (; count-- && (*string1 == *string2); string2++) {
+ if (!*string1++) {
+ return (0);
+ }
+ }
+
+ return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*string1 -
+ (unsigned char)*string2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strcat (Strcat)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcat(char *dst_string, const char *src_string)
+{
+ char *string;
+
+ /* Find end of the destination string */
+
+ for (string = dst_string; *string++;) {;
+ }
+
+ /* Concatenate the string */
+
+ for (--string; (*string++ = *src_string++);) {;
+ }
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strncat (strncat)
+ *
+ * PARAMETERS: dst_string - Target of the copy
+ * src_string - The source string to copy
+ * count - Maximum # of bytes to copy
+ *
+ * RETURN: dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string,
+ * with a maximum count.
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncat(char *dst_string, const char *src_string, acpi_size count)
+{
+ char *string;
+
+ if (count) {
+
+ /* Find end of the destination string */
+
+ for (string = dst_string; *string++;) {;
+ }
+
+ /* Concatenate the string */
+
+ for (--string; (*string++ = *src_string++) && --count;) {;
+ }
+
+ /* Null terminate if necessary */
+
+ if (!count) {
+ *string = 0;
+ }
+ }
+
+ return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strstr (strstr)
+ *
+ * PARAMETERS: string1 - Target string
+ * string2 - Substring to search for
+ *
+ * RETURN: Where substring match starts, Null if no match found
+ *
+ * DESCRIPTION: Checks if String2 occurs in String1. This is not really a
+ * full implementation of strstr, only sufficient for command
+ * matching
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strstr(char *string1, char *string2)
+{
+ char *string;
+
+ if (acpi_ut_strlen(string2) > acpi_ut_strlen(string1)) {
+ return (NULL);
+ }
+
+ /* Walk entire string, comparing the letters */
+
+ for (string = string1; *string2;) {
+ if (*string2 != *string) {
+ return (NULL);
+ }
+
+ string2++;
+ string++;
+ }
+
+ return (string1);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strtoul (strtoul)
+ *
+ * PARAMETERS: string - Null terminated string
+ * terminater - Where a pointer to the terminating byte is
+ * returned
+ * base - Radix of the string
+ *
+ * RETURN: Converted value
+ *
+ * DESCRIPTION: Convert a string into a 32-bit unsigned value.
+ * Note: use acpi_ut_strtoul64 for 64-bit integers.
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_strtoul(const char *string, char **terminator, u32 base)
+{
+ u32 converted = 0;
+ u32 index;
+ u32 sign;
+ const char *string_start;
+ u32 return_value = 0;
+ acpi_status status = AE_OK;
+
+ /*
+ * Save the value of the pointer to the buffer's first
+ * character, save the current errno value, and then
+ * skip over any white space in the buffer:
+ */
+ string_start = string;
+ while (ACPI_IS_SPACE(*string) || *string == '\t') {
+ ++string;
+ }
+
+ /*
+ * The buffer may contain an optional plus or minus sign.
+ * If it does, then skip over it but remember what is was:
+ */
+ if (*string == '-') {
+ sign = NEGATIVE;
+ ++string;
+ } else if (*string == '+') {
+ ++string;
+ sign = POSITIVE;
+ } else {
+ sign = POSITIVE;
+ }
+
+ /*
+ * If the input parameter Base is zero, then we need to
+ * determine if it is octal, decimal, or hexadecimal:
+ */
+ if (base == 0) {
+ if (*string == '0') {
+ if (acpi_ut_to_lower(*(++string)) == 'x') {
+ base = 16;
+ ++string;
+ } else {
+ base = 8;
+ }
+ } else {
+ base = 10;
+ }
+ } else if (base < 2 || base > 36) {
+ /*
+ * The specified Base parameter is not in the domain of
+ * this function:
+ */
+ goto done;
+ }
+
+ /*
+ * For octal and hexadecimal bases, skip over the leading
+ * 0 or 0x, if they are present.
+ */
+ if (base == 8 && *string == '0') {
+ string++;
+ }
+
+ if (base == 16 &&
+ *string == '0' && acpi_ut_to_lower(*(++string)) == 'x') {
+ string++;
+ }
+
+ /*
+ * Main loop: convert the string to an unsigned long:
+ */
+ while (*string) {
+ if (ACPI_IS_DIGIT(*string)) {
+ index = (u32)((u8)*string - '0');
+ } else {
+ index = (u32)acpi_ut_to_upper(*string);
+ if (ACPI_IS_UPPER(index)) {
+ index = index - 'A' + 10;
+ } else {
+ goto done;
+ }
+ }
+
+ if (index >= base) {
+ goto done;
+ }
+
+ /*
+ * Check to see if value is out of range:
+ */
+
+ if (return_value > ((ACPI_UINT32_MAX - (u32)index) / (u32)base)) {
+ status = AE_ERROR;
+ return_value = 0; /* reset */
+ } else {
+ return_value *= base;
+ return_value += index;
+ converted = 1;
+ }
+
+ ++string;
+ }
+
+ done:
+ /*
+ * If appropriate, update the caller's pointer to the next
+ * unconverted character in the buffer.
+ */
+ if (terminator) {
+ if (converted == 0 && return_value == 0 && string != NULL) {
+ *terminator = (char *)string_start;
+ } else {
+ *terminator = (char *)string;
+ }
+ }
+
+ if (status == AE_ERROR) {
+ return_value = ACPI_UINT32_MAX;
+ }
+
+ /*
+ * If a minus sign was present, then "the conversion is negated":
+ */
+ if (sign == NEGATIVE) {
+ return_value = (ACPI_UINT32_MAX - return_value) + 1;
+ }
+
+ return (return_value);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_to_upper (TOUPPER)
+ *
+ * PARAMETERS: c - Character to convert
+ *
+ * RETURN: Converted character as an int
+ *
+ * DESCRIPTION: Convert character to uppercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_upper(int c)
+{
+
+ return (ACPI_IS_LOWER(c) ? ((c) - 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_to_lower (TOLOWER)
+ *
+ * PARAMETERS: c - Character to convert
+ *
+ * RETURN: Converted character as an int
+ *
+ * DESCRIPTION: Convert character to lowercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_lower(int c)
+{
+
+ return (ACPI_IS_UPPER(c) ? ((c) + 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: is* functions
+ *
+ * DESCRIPTION: is* functions use the ctype table below
+ *
+ ******************************************************************************/
+
+const u8 _acpi_ctype[257] = {
+ _ACPI_CN, /* 0x00 0 NUL */
+ _ACPI_CN, /* 0x01 1 SOH */
+ _ACPI_CN, /* 0x02 2 STX */
+ _ACPI_CN, /* 0x03 3 ETX */
+ _ACPI_CN, /* 0x04 4 EOT */
+ _ACPI_CN, /* 0x05 5 ENQ */
+ _ACPI_CN, /* 0x06 6 ACK */
+ _ACPI_CN, /* 0x07 7 BEL */
+ _ACPI_CN, /* 0x08 8 BS */
+ _ACPI_CN | _ACPI_SP, /* 0x09 9 TAB */
+ _ACPI_CN | _ACPI_SP, /* 0x0A 10 LF */
+ _ACPI_CN | _ACPI_SP, /* 0x0B 11 VT */
+ _ACPI_CN | _ACPI_SP, /* 0x0C 12 FF */
+ _ACPI_CN | _ACPI_SP, /* 0x0D 13 CR */
+ _ACPI_CN, /* 0x0E 14 SO */
+ _ACPI_CN, /* 0x0F 15 SI */
+ _ACPI_CN, /* 0x10 16 DLE */
+ _ACPI_CN, /* 0x11 17 DC1 */
+ _ACPI_CN, /* 0x12 18 DC2 */
+ _ACPI_CN, /* 0x13 19 DC3 */
+ _ACPI_CN, /* 0x14 20 DC4 */
+ _ACPI_CN, /* 0x15 21 NAK */
+ _ACPI_CN, /* 0x16 22 SYN */
+ _ACPI_CN, /* 0x17 23 ETB */
+ _ACPI_CN, /* 0x18 24 CAN */
+ _ACPI_CN, /* 0x19 25 EM */
+ _ACPI_CN, /* 0x1A 26 SUB */
+ _ACPI_CN, /* 0x1B 27 ESC */
+ _ACPI_CN, /* 0x1C 28 FS */
+ _ACPI_CN, /* 0x1D 29 GS */
+ _ACPI_CN, /* 0x1E 30 RS */
+ _ACPI_CN, /* 0x1F 31 US */
+ _ACPI_XS | _ACPI_SP, /* 0x20 32 ' ' */
+ _ACPI_PU, /* 0x21 33 '!' */
+ _ACPI_PU, /* 0x22 34 '"' */
+ _ACPI_PU, /* 0x23 35 '#' */
+ _ACPI_PU, /* 0x24 36 '$' */
+ _ACPI_PU, /* 0x25 37 '%' */
+ _ACPI_PU, /* 0x26 38 '&' */
+ _ACPI_PU, /* 0x27 39 ''' */
+ _ACPI_PU, /* 0x28 40 '(' */
+ _ACPI_PU, /* 0x29 41 ')' */
+ _ACPI_PU, /* 0x2A 42 '*' */
+ _ACPI_PU, /* 0x2B 43 '+' */
+ _ACPI_PU, /* 0x2C 44 ',' */
+ _ACPI_PU, /* 0x2D 45 '-' */
+ _ACPI_PU, /* 0x2E 46 '.' */
+ _ACPI_PU, /* 0x2F 47 '/' */
+ _ACPI_XD | _ACPI_DI, /* 0x30 48 '0' */
+ _ACPI_XD | _ACPI_DI, /* 0x31 49 '1' */
+ _ACPI_XD | _ACPI_DI, /* 0x32 50 '2' */
+ _ACPI_XD | _ACPI_DI, /* 0x33 51 '3' */
+ _ACPI_XD | _ACPI_DI, /* 0x34 52 '4' */
+ _ACPI_XD | _ACPI_DI, /* 0x35 53 '5' */
+ _ACPI_XD | _ACPI_DI, /* 0x36 54 '6' */
+ _ACPI_XD | _ACPI_DI, /* 0x37 55 '7' */
+ _ACPI_XD | _ACPI_DI, /* 0x38 56 '8' */
+ _ACPI_XD | _ACPI_DI, /* 0x39 57 '9' */
+ _ACPI_PU, /* 0x3A 58 ':' */
+ _ACPI_PU, /* 0x3B 59 ';' */
+ _ACPI_PU, /* 0x3C 60 '<' */
+ _ACPI_PU, /* 0x3D 61 '=' */
+ _ACPI_PU, /* 0x3E 62 '>' */
+ _ACPI_PU, /* 0x3F 63 '?' */
+ _ACPI_PU, /* 0x40 64 '@' */
+ _ACPI_XD | _ACPI_UP, /* 0x41 65 'A' */
+ _ACPI_XD | _ACPI_UP, /* 0x42 66 'B' */
+ _ACPI_XD | _ACPI_UP, /* 0x43 67 'C' */
+ _ACPI_XD | _ACPI_UP, /* 0x44 68 'D' */
+ _ACPI_XD | _ACPI_UP, /* 0x45 69 'E' */
+ _ACPI_XD | _ACPI_UP, /* 0x46 70 'F' */
+ _ACPI_UP, /* 0x47 71 'G' */
+ _ACPI_UP, /* 0x48 72 'H' */
+ _ACPI_UP, /* 0x49 73 'I' */
+ _ACPI_UP, /* 0x4A 74 'J' */
+ _ACPI_UP, /* 0x4B 75 'K' */
+ _ACPI_UP, /* 0x4C 76 'L' */
+ _ACPI_UP, /* 0x4D 77 'M' */
+ _ACPI_UP, /* 0x4E 78 'N' */
+ _ACPI_UP, /* 0x4F 79 'O' */
+ _ACPI_UP, /* 0x50 80 'P' */
+ _ACPI_UP, /* 0x51 81 'Q' */
+ _ACPI_UP, /* 0x52 82 'R' */
+ _ACPI_UP, /* 0x53 83 'S' */
+ _ACPI_UP, /* 0x54 84 'T' */
+ _ACPI_UP, /* 0x55 85 'U' */
+ _ACPI_UP, /* 0x56 86 'V' */
+ _ACPI_UP, /* 0x57 87 'W' */
+ _ACPI_UP, /* 0x58 88 'X' */
+ _ACPI_UP, /* 0x59 89 'Y' */
+ _ACPI_UP, /* 0x5A 90 'Z' */
+ _ACPI_PU, /* 0x5B 91 '[' */
+ _ACPI_PU, /* 0x5C 92 '\' */
+ _ACPI_PU, /* 0x5D 93 ']' */
+ _ACPI_PU, /* 0x5E 94 '^' */
+ _ACPI_PU, /* 0x5F 95 '_' */
+ _ACPI_PU, /* 0x60 96 '`' */
+ _ACPI_XD | _ACPI_LO, /* 0x61 97 'a' */
+ _ACPI_XD | _ACPI_LO, /* 0x62 98 'b' */
+ _ACPI_XD | _ACPI_LO, /* 0x63 99 'c' */
+ _ACPI_XD | _ACPI_LO, /* 0x64 100 'd' */
+ _ACPI_XD | _ACPI_LO, /* 0x65 101 'e' */
+ _ACPI_XD | _ACPI_LO, /* 0x66 102 'f' */
+ _ACPI_LO, /* 0x67 103 'g' */
+ _ACPI_LO, /* 0x68 104 'h' */
+ _ACPI_LO, /* 0x69 105 'i' */
+ _ACPI_LO, /* 0x6A 106 'j' */
+ _ACPI_LO, /* 0x6B 107 'k' */
+ _ACPI_LO, /* 0x6C 108 'l' */
+ _ACPI_LO, /* 0x6D 109 'm' */
+ _ACPI_LO, /* 0x6E 110 'n' */
+ _ACPI_LO, /* 0x6F 111 'o' */
+ _ACPI_LO, /* 0x70 112 'p' */
+ _ACPI_LO, /* 0x71 113 'q' */
+ _ACPI_LO, /* 0x72 114 'r' */
+ _ACPI_LO, /* 0x73 115 's' */
+ _ACPI_LO, /* 0x74 116 't' */
+ _ACPI_LO, /* 0x75 117 'u' */
+ _ACPI_LO, /* 0x76 118 'v' */
+ _ACPI_LO, /* 0x77 119 'w' */
+ _ACPI_LO, /* 0x78 120 'x' */
+ _ACPI_LO, /* 0x79 121 'y' */
+ _ACPI_LO, /* 0x7A 122 'z' */
+ _ACPI_PU, /* 0x7B 123 '{' */
+ _ACPI_PU, /* 0x7C 124 '|' */
+ _ACPI_PU, /* 0x7D 125 '}' */
+ _ACPI_PU, /* 0x7E 126 '~' */
+ _ACPI_CN, /* 0x7F 127 DEL */
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x80 to 0x8F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0x90 to 0x9F */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xA0 to 0xAF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xB0 to 0xBF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xC0 to 0xCF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xD0 to 0xDF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xE0 to 0xEF */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0xF0 to 0xFF */
+ 0 /* 0x100 */
+};
+
+#endif /* ACPI_USE_SYSTEM_CLIBRARY */
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdebug")
+
#ifdef ACPI_DEBUG_OUTPUT
-static acpi_thread_id acpi_gbl_prev_thread_id;
+static acpi_thread_id acpi_gbl_prev_thread_id = (acpi_thread_id) 0xFFFFFFFF;
static char *acpi_gbl_fn_entry_str = "----Entry";
static char *acpi_gbl_fn_exit_str = "----Exit-";
* RETURN: Updated pointer to the function name
*
* DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- * This allows compiler macros such as __func__ to be used
+ * This allows compiler macros such as __FUNCTION__ to be used
* with no change to the debug output.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Print message with no headers. Has same interface as
+ * DESCRIPTION: Print message with no headers. Has same interface as
* debug_print so that the same macros can be used.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
const char *function_name,
const char *module_name, u32 component_id, void *pointer)
{
+
acpi_gbl_nesting_level++;
acpi_ut_track_stack_ptr();
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit status also.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
*
* RETURN: None
*
- * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
+ * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is
* set in debug_level. Prints exit value also.
*
******************************************************************************/
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
* display - BYTE, WORD, DWORD, or QWORD display
- * component_ID - Caller's component ID
+ * offset - Beginning buffer offset (display only)
*
* RETURN: None
*
*
******************************************************************************/
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
{
u32 i = 0;
u32 j;
/* Print current offset */
- acpi_os_printf("%6.4X: ", i);
+ acpi_os_printf("%6.4X: ", (base_offset + i));
/* Print 16 hex chars */
/*******************************************************************************
*
- * FUNCTION: acpi_ut_dump_buffer
+ * FUNCTION: acpi_ut_debug_dump_buffer
*
* PARAMETERS: buffer - Buffer to dump
* count - Amount to dump, in bytes
*
******************************************************************************/
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
{
/* Only dump the buffer if tracing is enabled */
return;
}
- acpi_ut_dump_buffer2(buffer, count, display);
+ acpi_ut_dump_buffer(buffer, count, display, 0);
}
******************************************************************************/
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id)
+ struct acpi_pnp_device_id **return_id)
{
union acpi_operand_object *obj_desc;
- struct acpica_device_id *hid;
+ struct acpi_pnp_device_id *hid;
u32 length;
acpi_status status;
/* Allocate a buffer for the HID */
hid =
- ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
(acpi_size) length);
if (!hid) {
status = AE_NO_MEMORY;
goto cleanup;
}
- /* Area for the string starts after DEVICE_ID struct */
+ /* Area for the string starts after PNP_DEVICE_ID struct */
- hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
+ hid->string =
+ ACPI_ADD_PTR(char, hid, sizeof(struct acpi_pnp_device_id));
/* Convert EISAID to a string or simply copy existing string */
return_ACPI_STATUS(status);
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_execute_SUB
+ *
+ * PARAMETERS: device_node - Node for the device
+ * return_id - Where the _SUB is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Executes the _SUB control method that returns the subsystem
+ * ID of the device. The _SUB value is always a string containing
+ * either a valid PNP or ACPI ID.
+ *
+ * NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+ struct acpi_pnp_device_id **return_id)
+{
+ union acpi_operand_object *obj_desc;
+ struct acpi_pnp_device_id *sub;
+ u32 length;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_execute_SUB);
+
+ status = acpi_ut_evaluate_object(device_node, METHOD_NAME__SUB,
+ ACPI_BTYPE_STRING, &obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get the size of the String to be returned, includes null terminator */
+
+ length = obj_desc->string.length + 1;
+
+ /* Allocate a buffer for the SUB */
+
+ sub =
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
+ (acpi_size) length);
+ if (!sub) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Area for the string starts after PNP_DEVICE_ID struct */
+
+ sub->string =
+ ACPI_ADD_PTR(char, sub, sizeof(struct acpi_pnp_device_id));
+
+ /* Simply copy existing string */
+
+ ACPI_STRCPY(sub->string, obj_desc->string.pointer);
+ sub->length = length;
+ *return_id = sub;
+
+ cleanup:
+
+ /* On exit, we must delete the return object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_UID
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id **return_id)
+ struct acpi_pnp_device_id **return_id)
{
union acpi_operand_object *obj_desc;
- struct acpica_device_id *uid;
+ struct acpi_pnp_device_id *uid;
u32 length;
acpi_status status;
/* Allocate a buffer for the UID */
uid =
- ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
(acpi_size) length);
if (!uid) {
status = AE_NO_MEMORY;
goto cleanup;
}
- /* Area for the string starts after DEVICE_ID struct */
+ /* Area for the string starts after PNP_DEVICE_ID struct */
- uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
+ uid->string =
+ ACPI_ADD_PTR(char, uid, sizeof(struct acpi_pnp_device_id));
/* Convert an Integer to string, or just copy an existing string */
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
- struct acpica_device_id_list **return_cid_list)
+ struct acpi_pnp_device_id_list **return_cid_list)
{
union acpi_operand_object **cid_objects;
union acpi_operand_object *obj_desc;
- struct acpica_device_id_list *cid_list;
+ struct acpi_pnp_device_id_list *cid_list;
char *next_id_string;
u32 string_area_size;
u32 length;
/*
* Now that we know the length of the CIDs, allocate return buffer:
* 1) Size of the base structure +
- * 2) Size of the CID DEVICE_ID array +
+ * 2) Size of the CID PNP_DEVICE_ID array +
* 3) Size of the actual CID strings
*/
- cid_list_size = sizeof(struct acpica_device_id_list) +
- ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
+ cid_list_size = sizeof(struct acpi_pnp_device_id_list) +
+ ((count - 1) * sizeof(struct acpi_pnp_device_id)) +
+ string_area_size;
cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
if (!cid_list) {
goto cleanup;
}
- /* Area for CID strings starts after the CID DEVICE_ID array */
+ /* Area for CID strings starts after the CID PNP_DEVICE_ID array */
next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
- ((acpi_size) count * sizeof(struct acpica_device_id));
+ ((acpi_size) count * sizeof(struct acpi_pnp_device_id));
/* Copy/convert the CIDs to the return buffer */
* RETURN: Status (Checks for divide-by-zero)
*
* DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits)
- * divide and modulo. The result is a 64-bit quotient and a
+ * divide and modulo. The result is a 64-bit quotient and a
* 32-bit remainder.
*
******************************************************************************/
* POSSIBILITY OF SUCH DAMAGES.
*/
-#include <linux/module.h>
-
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
*/
acpi_gbl_owner_id_mask[j] |= (1 << k);
- acpi_gbl_last_owner_id_index = (u8) j;
- acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+ acpi_gbl_last_owner_id_index = (u8)j;
+ acpi_gbl_next_owner_id_offset = (u8)(k + 1);
/*
* Construct encoded ID from the index and bit position
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
- * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
+ * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
*
******************************************************************************/
return;
}
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS: src_string - The source string to convert
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strlwr(char *src_string)
+{
+ char *string;
+
+ ACPI_FUNCTION_ENTRY();
+
+ if (!src_string) {
+ return;
+ }
+
+ /* Walk entire string, lowercasing the letters */
+
+ for (string = src_string; *string; string++) {
+ *string = (char)ACPI_TOLOWER(*string);
+ }
+
+ return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ut_stricmp
+ *
+ * PARAMETERS: string1 - first string to compare
+ * string2 - second string to compare
+ *
+ * RETURN: int that signifies string relationship. Zero means strings
+ * are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ * strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+ int c1;
+ int c2;
+
+ do {
+ c1 = tolower((int)*string1);
+ c2 = tolower((int)*string2);
+
+ string1++;
+ string2++;
+ }
+ while ((c1 == c2) && (c1));
+
+ return (c1 - c2);
+}
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_print_string
* RETURN: None
*
* DESCRIPTION: Set the global integer bit width based upon the revision
- * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
- * For Revision 2 and above, Integers are 64 bits. Yes, this
+ * of the DSDT. For Revision 1 and 0, Integers are 32 bits.
+ * For Revision 2 and above, Integers are 64 bits. Yes, this
* makes a difference.
*
******************************************************************************/
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
- * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
* RETURN: Repaired version of the name
*
* DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- * return the new name.
+ * return the new name. NOTE: the Name parameter must reside in
+ * read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
*
******************************************************************************/
-acpi_name acpi_ut_repair_name(char *name)
+void acpi_ut_repair_name(char *name)
{
- u32 i;
- char new_name[ACPI_NAME_SIZE];
+ u32 i;
+ u8 found_bad_char = FALSE;
+ u32 original_name;
+
+ ACPI_FUNCTION_NAME(ut_repair_name);
+
+ ACPI_MOVE_NAME(&original_name, name);
+
+ /* Check each character in the name */
for (i = 0; i < ACPI_NAME_SIZE; i++) {
- new_name[i] = name[i];
+ if (acpi_ut_valid_acpi_char(name[i], i)) {
+ continue;
+ }
/*
* Replace a bad character with something printable, yet technically
* still invalid. This prevents any collisions with existing "good"
* names in the namespace.
*/
- if (!acpi_ut_valid_acpi_char(name[i], i)) {
- new_name[i] = '*';
- }
+ name[i] = '*';
+ found_bad_char = TRUE;
}
- return (*(u32 *) new_name);
+ if (found_bad_char) {
+
+ /* Report warning only if in strict mode or debug mode */
+
+ if (!acpi_gbl_enable_interpreter_slack) {
+ ACPI_WARNING((AE_INFO,
+ "Found bad character(s) in name, repaired: [%4.4s]\n",
+ name));
+ } else {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found bad character(s) in name, repaired: [%4.4s]\n",
+ name));
+ }
+ }
}
/*******************************************************************************
*
******************************************************************************/
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
/* Convert ASCII 0-9 to Decimal value */
- this_digit = ((u8) * string) - '0';
+ this_digit = ((u8)*string) - '0';
} else if (base == 10) {
/* Digit is out of range; possible in to_integer case only */
term = 1;
} else {
- this_digit = (u8) ACPI_TOUPPER(*string);
+ this_digit = (u8)ACPI_TOUPPER(*string);
if (ACPI_IS_XDIGIT((char)this_digit)) {
/* Convert ASCII Hex char to value */
valid_digits++;
- if (sign_of0x && ((valid_digits > 16)
- || ((valid_digits > 8) && mode32))) {
+ if (sign_of0x
+ && ((valid_digits > 16)
+ || ((valid_digits > 8) && mode32))) {
/*
* This is to_integer operation case.
* No any restrictions for string-to-integer conversion,
/* Divide the digit into the correct position */
- (void)acpi_ut_short_divide((dividend - (u64) this_digit),
+ (void)acpi_ut_short_divide((dividend - (u64)this_digit),
base, "ient, NULL);
if (return_value > quotient) {
******************************************************************************/
acpi_status
-acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
+acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
void *target_object,
acpi_pkg_callback walk_callback, void *context)
{
/*
* Check for:
- * 1) An uninitialized package element. It is completely
+ * 1) An uninitialized package element. It is completely
* legal to declare a package and leave it uninitialized
* 2) Not an internal object - can be a namespace node instead
- * 3) Any type other than a package. Packages are handled in else
+ * 3) Any type other than a package. Packages are handled in else
* case below.
*/
if ((!this_source_obj) ||
state->pkg.source_object->package.count) {
/*
* We've handled all of the objects at this level, This means
- * that we have just completed a package. That package may
+ * that we have just completed a package. That package may
* have contained one or more packages itself.
*
* Delete this state and pop the previous state (package).
acpi_gbl_mutex_info[mutex_id].mutex = NULL;
acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+
+ return_VOID;
}
/*******************************************************************************
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than or equal to this one. If so, the thread has violated
- * the mutex ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than or equal to this one. If so, the thread has violated
+ * the mutex ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
/*
* Mutex debug code, for internal debugging only.
*
- * Deadlock prevention. Check if this thread owns any mutexes of value
- * greater than this one. If so, the thread has violated the mutex
- * ordering rule. This indicates a coding error somewhere in
+ * Deadlock prevention. Check if this thread owns any mutexes of value
+ * greater than this one. If so, the thread has violated the mutex
+ * ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
*
* NOTE: We always allocate the worst-case object descriptor because
* these objects are cached, and we want them to be
- * one-size-satisifies-any-request. This in itself may not be
+ * one-size-satisifies-any-request. This in itself may not be
* the most memory efficient, but the efficiency of the object
* cache should more than make up for this!
*
* line_number - Caller's line number (for error output)
* component_id - Caller's component ID (for error output)
*
- * RETURN: Pointer to newly allocated object descriptor. Null on error
+ * RETURN: Pointer to newly allocated object descriptor. Null on error
*
- * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
+ * DESCRIPTION: Allocate a new object descriptor. Gracefully handle
* error conditions.
*
******************************************************************************/
/*
* Account for the space required by the object rounded up to the next
- * multiple of the machine word size. This keeps each object aligned
+ * multiple of the machine word size. This keeps each object aligned
* on a machine word boundary. (preventing alignment faults on some
* machines.)
*/
*
* RETURN: The new state object. NULL on failure.
*
- * DESCRIPTION: Create a generic state object. Attempt to obtain one from
+ * DESCRIPTION: Create a generic state object. Attempt to obtain one from
* the global state cache; If none available, create a new one.
*
******************************************************************************/
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: uttrack - Memory allocation tracking routines (debug only)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * These procedures are used for tracking memory leaks in the subsystem, and
+ * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
+ *
+ * Each memory allocation is tracked via a doubly linked list. Each
+ * element contains the caller's component, module name, function name, and
+ * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
+ * acpi_ut_track_allocation to add an element to the list; deletion
+ * occurs in the body of acpi_ut_free.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("uttrack")
+
+/* Local prototypes */
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+ acpi_debug_mem_block
+ *allocation);
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
+ acpi_size size,
+ u8 alloc_type,
+ u32 component, const char *module, u32 line);
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
+ u32 component, const char *module, u32 line);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_create_list
+ *
+ * PARAMETERS: cache_name - Ascii name for the cache
+ * object_size - Size of each cached object
+ * return_cache - Where the new cache object is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a local memory list for tracking purposed
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_create_list(char *list_name,
+ u16 object_size, struct acpi_memory_list **return_cache)
+{
+ struct acpi_memory_list *cache;
+
+ cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+ if (!cache) {
+ return (AE_NO_MEMORY);
+ }
+
+ ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+
+ cache->list_name = list_name;
+ cache->object_size = object_size;
+
+ *return_cache = cache;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_and_track
+ *
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: The subsystem's equivalent of malloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_and_track(acpi_size size,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *allocation;
+ acpi_status status;
+
+ allocation =
+ acpi_ut_allocate(size + sizeof(struct acpi_debug_mem_header),
+ component, module, line);
+ if (!allocation) {
+ return (NULL);
+ }
+
+ status = acpi_ut_track_allocation(allocation, size,
+ ACPI_MEM_MALLOC, component, module,
+ line);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_free(allocation);
+ return (NULL);
+ }
+
+ acpi_gbl_global_list->total_allocated++;
+ acpi_gbl_global_list->total_size += (u32)size;
+ acpi_gbl_global_list->current_total_size += (u32)size;
+ if (acpi_gbl_global_list->current_total_size >
+ acpi_gbl_global_list->max_occupied) {
+ acpi_gbl_global_list->max_occupied =
+ acpi_gbl_global_list->current_total_size;
+ }
+
+ return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_allocate_zeroed_and_track
+ *
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: Subsystem equivalent of calloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
+ u32 component,
+ const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *allocation;
+ acpi_status status;
+
+ allocation =
+ acpi_ut_allocate_zeroed(size + sizeof(struct acpi_debug_mem_header),
+ component, module, line);
+ if (!allocation) {
+
+ /* Report allocation error */
+
+ ACPI_ERROR((module, line,
+ "Could not allocate size %u", (u32)size));
+ return (NULL);
+ }
+
+ status = acpi_ut_track_allocation(allocation, size,
+ ACPI_MEM_CALLOC, component, module,
+ line);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_free(allocation);
+ return (NULL);
+ }
+
+ acpi_gbl_global_list->total_allocated++;
+ acpi_gbl_global_list->total_size += (u32)size;
+ acpi_gbl_global_list->current_total_size += (u32)size;
+ if (acpi_gbl_global_list->current_total_size >
+ acpi_gbl_global_list->max_occupied) {
+ acpi_gbl_global_list->max_occupied =
+ acpi_gbl_global_list->current_total_size;
+ }
+
+ return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_free_and_track
+ *
+ * PARAMETERS: allocation - Address of the memory to deallocate
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Frees the memory at Allocation
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_free_and_track(void *allocation,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_debug_mem_block *debug_block;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
+
+ if (NULL == allocation) {
+ ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
+
+ return_VOID;
+ }
+
+ debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
+ (((char *)allocation) -
+ sizeof(struct acpi_debug_mem_header)));
+
+ acpi_gbl_global_list->total_freed++;
+ acpi_gbl_global_list->current_total_size -= debug_block->size;
+
+ status = acpi_ut_remove_allocation(debug_block,
+ component, module, line);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
+ }
+
+ acpi_os_free(debug_block);
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_find_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ *
+ * RETURN: Three cases:
+ * 1) List is empty, NULL is returned.
+ * 2) Element was found. Returns Allocation parameter.
+ * 3) Element was not found. Returns position where it should be
+ * inserted into the list.
+ *
+ * DESCRIPTION: Searches for an element in the global allocation tracking list.
+ * If the element is not found, returns the location within the
+ * list where the element should be inserted.
+ *
+ * Note: The list is ordered by larger-to-smaller addresses.
+ *
+ * This global list is used to detect memory leaks in ACPICA as
+ * well as other issues such as an attempt to release the same
+ * internal object more than once. Although expensive as far
+ * as cpu time, this list is much more helpful for finding these
+ * types of issues than using memory leak detectors outside of
+ * the ACPICA code.
+ *
+ ******************************************************************************/
+
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+ acpi_debug_mem_block
+ *allocation)
+{
+ struct acpi_debug_mem_block *element;
+
+ element = acpi_gbl_global_list->list_head;
+ if (!element) {
+ return (NULL);
+ }
+
+ /*
+ * Search for the address.
+ *
+ * Note: List is ordered by larger-to-smaller addresses, on the
+ * assumption that a new allocation usually has a larger address
+ * than previous allocations.
+ */
+ while (element > allocation) {
+
+ /* Check for end-of-list */
+
+ if (!element->next) {
+ return (element);
+ }
+
+ element = element->next;
+ }
+
+ if (element == allocation) {
+ return (element);
+ }
+
+ return (element->previous);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_track_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ * size - Size of the allocation
+ * alloc_type - MEM_MALLOC or MEM_CALLOC
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Inserts an element into the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
+ acpi_size size,
+ u8 alloc_type,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_memory_list *mem_list;
+ struct acpi_debug_mem_block *element;
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ mem_list = acpi_gbl_global_list;
+ status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Search the global list for this address to make sure it is not
+ * already present. This will catch several kinds of problems.
+ */
+ element = acpi_ut_find_allocation(allocation);
+ if (element == allocation) {
+ ACPI_ERROR((AE_INFO,
+ "UtTrackAllocation: Allocation (%p) already present in global list!",
+ allocation));
+ goto unlock_and_exit;
+ }
+
+ /* Fill in the instance data */
+
+ allocation->size = (u32)size;
+ allocation->alloc_type = alloc_type;
+ allocation->component = component;
+ allocation->line = line;
+
+ ACPI_STRNCPY(allocation->module, module, ACPI_MAX_MODULE_NAME);
+ allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
+
+ if (!element) {
+
+ /* Insert at list head */
+
+ if (mem_list->list_head) {
+ ((struct acpi_debug_mem_block *)(mem_list->list_head))->
+ previous = allocation;
+ }
+
+ allocation->next = mem_list->list_head;
+ allocation->previous = NULL;
+
+ mem_list->list_head = allocation;
+ } else {
+ /* Insert after element */
+
+ allocation->next = element->next;
+ allocation->previous = element;
+
+ if (element->next) {
+ (element->next)->previous = allocation;
+ }
+
+ element->next = allocation;
+ }
+
+ unlock_and_exit:
+ status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_remove_allocation
+ *
+ * PARAMETERS: allocation - Address of allocated memory
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Deletes an element from the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
+ u32 component, const char *module, u32 line)
+{
+ struct acpi_memory_list *mem_list;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_remove_allocation);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ mem_list = acpi_gbl_global_list;
+ if (NULL == mem_list->list_head) {
+
+ /* No allocations! */
+
+ ACPI_ERROR((module, line,
+ "Empty allocation list, nothing to free!"));
+
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Unlink */
+
+ if (allocation->previous) {
+ (allocation->previous)->next = allocation->next;
+ } else {
+ mem_list->list_head = allocation->next;
+ }
+
+ if (allocation->next) {
+ (allocation->next)->previous = allocation->previous;
+ }
+
+ /* Mark the segment as deleted */
+
+ ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing size 0%X\n",
+ allocation->size));
+
+ status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_dump_allocation_info
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print some info about the outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocation_info(void)
+{
+/*
+ struct acpi_memory_list *mem_list;
+*/
+
+ ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
+
+/*
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Current allocations",
+ mem_list->current_count,
+ ROUND_UP_TO_1K (mem_list->current_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
+ mem_list->max_concurrent_count,
+ ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
+ running_object_count,
+ ROUND_UP_TO_1K (running_object_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
+ running_alloc_count,
+ ROUND_UP_TO_1K (running_alloc_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Current Nodes",
+ acpi_gbl_current_node_count,
+ ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
+
+ ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+ ("%30s: %4d (%3d Kb)\n", "Max Nodes",
+ acpi_gbl_max_concurrent_node_count,
+ ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
+ sizeof (struct acpi_namespace_node)))));
+*/
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_dump_allocations
+ *
+ * PARAMETERS: component - Component(s) to dump info for.
+ * module - Module to dump info for. NULL means all.
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print a list of all outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocations(u32 component, const char *module)
+{
+ struct acpi_debug_mem_block *element;
+ union acpi_descriptor *descriptor;
+ u32 num_outstanding = 0;
+ u8 descriptor_type;
+
+ ACPI_FUNCTION_TRACE(ut_dump_allocations);
+
+ if (acpi_gbl_disable_mem_tracking) {
+ return_VOID;
+ }
+
+ /*
+ * Walk the allocation list.
+ */
+ if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
+ return_VOID;
+ }
+
+ element = acpi_gbl_global_list->list_head;
+ while (element) {
+ if ((element->component & component) &&
+ ((module == NULL)
+ || (0 == ACPI_STRCMP(module, element->module)))) {
+ descriptor =
+ ACPI_CAST_PTR(union acpi_descriptor,
+ &element->user_space);
+
+ if (element->size <
+ sizeof(struct acpi_common_descriptor)) {
+ acpi_os_printf("%p Length 0x%04X %9.9s-%u "
+ "[Not a Descriptor - too small]\n",
+ descriptor, element->size,
+ element->module, element->line);
+ } else {
+ /* Ignore allocated objects that are in a cache */
+
+ if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
+ ACPI_DESC_TYPE_CACHED) {
+ acpi_os_printf
+ ("%p Length 0x%04X %9.9s-%u [%s] ",
+ descriptor, element->size,
+ element->module, element->line,
+ acpi_ut_get_descriptor_name
+ (descriptor));
+
+ /* Validate the descriptor type using Type field and length */
+
+ descriptor_type = 0; /* Not a valid descriptor type */
+
+ switch (ACPI_GET_DESCRIPTOR_TYPE
+ (descriptor)) {
+ case ACPI_DESC_TYPE_OPERAND:
+ if (element->size ==
+ sizeof(union
+ acpi_operand_object))
+ {
+ descriptor_type =
+ ACPI_DESC_TYPE_OPERAND;
+ }
+ break;
+
+ case ACPI_DESC_TYPE_PARSER:
+ if (element->size ==
+ sizeof(union
+ acpi_parse_object)) {
+ descriptor_type =
+ ACPI_DESC_TYPE_PARSER;
+ }
+ break;
+
+ case ACPI_DESC_TYPE_NAMED:
+ if (element->size ==
+ sizeof(struct
+ acpi_namespace_node))
+ {
+ descriptor_type =
+ ACPI_DESC_TYPE_NAMED;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ /* Display additional info for the major descriptor types */
+
+ switch (descriptor_type) {
+ case ACPI_DESC_TYPE_OPERAND:
+ acpi_os_printf
+ ("%12.12s RefCount 0x%04X\n",
+ acpi_ut_get_type_name
+ (descriptor->object.common.
+ type),
+ descriptor->object.common.
+ reference_count);
+ break;
+
+ case ACPI_DESC_TYPE_PARSER:
+ acpi_os_printf
+ ("AmlOpcode 0x%04hX\n",
+ descriptor->op.asl.
+ aml_opcode);
+ break;
+
+ case ACPI_DESC_TYPE_NAMED:
+ acpi_os_printf("%4.4s\n",
+ acpi_ut_get_node_name
+ (&descriptor->
+ node));
+ break;
+
+ default:
+ acpi_os_printf("\n");
+ break;
+ }
+ }
+ }
+
+ num_outstanding++;
+ }
+
+ element = element->next;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+
+ /* Print summary */
+
+ if (!num_outstanding) {
+ ACPI_INFO((AE_INFO, "No outstanding allocations"));
+ } else {
+ ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
+ num_outstanding, num_outstanding));
+ }
+
+ return_VOID;
+}
+
+#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
* RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
- * state of the ACPI subsystem. It will return system information
+ * state of the ACPI subsystem. It will return system information
* in the out_buffer.
*
* If the function fails an appropriate status will be returned
}
acpi_gbl_init_handler = handler;
- return AE_OK;
+ return (AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
+
return_ACPI_STATUS(AE_OK);
}
ACPI_MOVE_32_TO_32(&bad_name,
ACPI_CAST_PTR(u32, internal_name));
- acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
+ acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name);
} else {
/* Convert path to external format */
return rc;
}
-static int __devexit ghes_remove(struct platform_device *ghes_dev)
+static int ghes_remove(struct platform_device *ghes_dev)
{
struct ghes *ghes;
struct acpi_hest_generic *generic;
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/suspend.h>
+#include <asm/unaligned.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
ACPI_BATTERY_ALARM_PRESENT,
ACPI_BATTERY_XINFO_PRESENT,
ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+ /* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+ switches between mWh and mAh depending on whether the system
+ is running on battery or not. When mAh is the unit, most
+ reported values are incorrect and need to be adjusted by
+ 10000/design_voltage. Verified on x201, t410, t410s, and x220.
+ Pre-2010 and 2012 models appear to always report in mWh and
+ are thus unaffected (tested with t42, t61, t500, x200, x300,
+ and x230). Also, in mid-2012 Lenovo issued a BIOS update for
+ the 2011 models that fixes the issue (tested on x220 with a
+ post-1.29 BIOS), but as of Nov. 2012, no such update is
+ available for the 2010 models. */
+ ACPI_BATTERY_QUIRK_THINKPAD_MAH,
};
struct acpi_battery {
kfree(buffer.pointer);
if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
battery->full_charge_capacity = battery->design_capacity;
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+ battery->power_unit && battery->design_voltage) {
+ battery->design_capacity = battery->design_capacity *
+ 10000 / battery->design_voltage;
+ battery->full_charge_capacity = battery->full_charge_capacity *
+ 10000 / battery->design_voltage;
+ battery->design_capacity_warning =
+ battery->design_capacity_warning *
+ 10000 / battery->design_voltage;
+ /* Curiously, design_capacity_low, unlike the rest of them,
+ is correct. */
+ /* capacity_granularity_* equal 1 on the systems tested, so
+ it's impossible to tell if they would need an adjustment
+ or not if their values were higher. */
+ }
return result;
}
&& battery->capacity_now >= 0 && battery->capacity_now <= 100)
battery->capacity_now = (battery->capacity_now *
battery->full_charge_capacity) / 100;
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+ battery->power_unit && battery->design_voltage) {
+ battery->capacity_now = battery->capacity_now *
+ 10000 / battery->design_voltage;
+ }
return result;
}
mutex_unlock(&battery->sysfs_lock);
}
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+ struct acpi_battery *battery = (struct acpi_battery *)private;
+ /* Note: the hardcoded offsets below have been extracted from
+ the source code of dmidecode. */
+ if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+ const u8 *dmi_data = (const u8 *)(dm + 1);
+ int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+ if (dm->length >= 18)
+ dmi_capacity *= dmi_data[17];
+ if (battery->design_capacity * battery->design_voltage / 1000
+ != dmi_capacity &&
+ battery->design_capacity * 10 == dmi_capacity)
+ set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+ &battery->flags);
+ }
+}
+
/*
* According to the ACPI spec, some kinds of primary batteries can
* report percentage battery remaining capacity directly to OS.
battery->capacity_now = (battery->capacity_now *
battery->full_charge_capacity) / 100;
}
+
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+ return ;
+
+ if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+ const char *s;
+ s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+ if (s && !strnicmp(s, "ThinkPad", 8)) {
+ dmi_walk(find_battery, battery);
+ if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+ &battery->flags) &&
+ battery->design_voltage) {
+ battery->design_capacity =
+ battery->design_capacity *
+ 10000 / battery->design_voltage;
+ battery->full_charge_capacity =
+ battery->full_charge_capacity *
+ 10000 / battery->design_voltage;
+ battery->design_capacity_warning =
+ battery->design_capacity_warning *
+ 10000 / battery->design_voltage;
+ battery->capacity_now = battery->capacity_now *
+ 10000 / battery->design_voltage;
+ }
+ }
+ }
}
static int acpi_battery_update(struct acpi_battery *battery)
}
-static int __acpi_bus_set_power(struct acpi_device *device, int state)
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
{
int result = 0;
acpi_status status = AE_OK;
* a lower-powered state.
*/
if (state < device->power.state) {
+ if (device->power.state >= ACPI_STATE_D3_HOT &&
+ state != ACPI_STATE_D0) {
+ printk(KERN_WARNING PREFIX
+ "Cannot transition to non-D0 state from D3\n");
+ return -ENODEV;
+ }
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
if (result)
return result;
}
+EXPORT_SYMBOL(acpi_device_set_power);
int acpi_bus_set_power(acpi_handle handle, int state)
return -ENODEV;
}
- return __acpi_bus_set_power(device, state);
+ return acpi_device_set_power(device, state);
}
EXPORT_SYMBOL(acpi_bus_set_power);
if (result)
return result;
- result = __acpi_bus_set_power(device, state);
+ result = acpi_device_set_power(device, state);
if (!result && state_p)
*state_p = state;
return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
}
+static bool is_container_device(const char *hid)
+{
+ const struct acpi_device_id *container_id;
+
+ for (container_id = container_device_ids;
+ container_id->id[0]; container_id++) {
+ if (!strcmp((char *)container_id->id, hid))
+ return true;
+ }
+
+ return false;
+}
+
/*******************************************************************/
static int acpi_container_add(struct acpi_device *device)
{
struct acpi_container *container;
-
- if (!device) {
- printk(KERN_ERR PREFIX "device is NULL\n");
- return -EINVAL;
- }
-
container = kzalloc(sizeof(struct acpi_container), GFP_KERNEL);
if (!container)
return -ENOMEM;
case ACPI_NOTIFY_BUS_CHECK:
/* Fall through */
case ACPI_NOTIFY_DEVICE_CHECK:
- printk(KERN_WARNING "Container driver received %s event\n",
+ pr_debug("Container driver received %s event\n",
(type == ACPI_NOTIFY_BUS_CHECK) ?
"ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
result = container_device_add(&device, handle);
if (result) {
- printk(KERN_WARNING "Failed to add container\n");
+ acpi_handle_warn(handle, "Failed to add container\n");
break;
}
goto end;
}
- if (strcmp(hid, "ACPI0004") && strcmp(hid, "PNP0A05") &&
- strcmp(hid, "PNP0A06")) {
+ if (!is_container_device(hid))
goto end;
- }
switch (*action) {
case INSTALL_NOTIFY_HANDLER:
--- /dev/null
+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events. For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler, void *context)
+{
+ acpi_status status = AE_ALREADY_EXISTS;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (adev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_install_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ adev->wakeup.flags.notifier_present = true;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler)
+{
+ acpi_status status = AE_BAD_PARAMETER;
+
+ mutex_lock(&acpi_pm_notifier_lock);
+
+ if (!adev->wakeup.flags.notifier_present)
+ goto out;
+
+ status = acpi_remove_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ handler);
+ if (ACPI_FAILURE(status))
+ goto out;
+
+ adev->wakeup.flags.notifier_present = false;
+
+ out:
+ mutex_unlock(&acpi_pm_notifier_lock);
+ return status;
+}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state. If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p)
+{
+ char acpi_method[] = "_SxD";
+ unsigned long long d_min, d_max;
+ bool wakeup = false;
+
+ if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+ return -EINVAL;
+
+ if (d_max_in > ACPI_STATE_D3_HOT) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+ if (stat == PM_QOS_FLAGS_ALL)
+ d_max_in = ACPI_STATE_D3_HOT;
+ }
+
+ acpi_method[2] = '0' + target_state;
+ /*
+ * If the sleep state is S0, the lowest limit from ACPI is D3,
+ * but if the device has _S0W, we will use the value from _S0W
+ * as the lowest limit from ACPI. Finally, we will constrain
+ * the lowest limit with the specified one.
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (target_state > ACPI_STATE_S0) {
+ acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+ wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+ && adev->wakeup.sleep_state >= target_state;
+ } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+ PM_QOS_FLAGS_NONE) {
+ wakeup = adev->wakeup.flags.valid;
+ }
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (wakeup) {
+ acpi_status status;
+
+ acpi_method[3] = 'W';
+ status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+ &d_max);
+ if (ACPI_FAILURE(status)) {
+ if (target_state != ACPI_STATE_S0 ||
+ status != AE_NOT_FOUND)
+ d_max = d_min;
+ } else if (d_max < d_min) {
+ /* Warn the user of the broken DSDT */
+ printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+ acpi_method);
+ /* Sanitize it */
+ d_min = d_max;
+ }
+ }
+
+ if (d_max_in < d_min)
+ return -EINVAL;
+ if (d_min_p)
+ *d_min_p = d_min;
+ /* constrain d_max with specified lowest limit (max number) */
+ if (d_max > d_max_in) {
+ for (d_max = d_max_in; d_max > d_min; d_max--) {
+ if (adev->power.states[d_max].flags.valid)
+ break;
+ }
+ }
+ return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+ d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_wakeup_device - Wakeup notification handler for ACPI devices.
+ * @handle: ACPI handle of the device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: Device corresponding to @handle.
+ */
+static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
+{
+ struct device *dev = context;
+
+ if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
+ pm_wakeup_event(dev, 0);
+ pm_runtime_resume(dev);
+ }
+}
+
+/**
+ * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
+ * @adev: ACPI device to enable/disable the remote wakeup for.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
+{
+ struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+ if (enable) {
+ acpi_status res;
+ int error;
+
+ error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
+ if (error)
+ return error;
+
+ res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ if (ACPI_FAILURE(res)) {
+ acpi_disable_wakeup_device_power(adev);
+ return -EIO;
+ }
+ } else {
+ acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+ acpi_disable_wakeup_device_power(adev);
+ }
+ return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+ struct acpi_device *adev;
+ acpi_handle handle;
+
+ if (!device_run_wake(phys_dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(phys_dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ return __acpi_device_run_wake(adev, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+#else
+static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
+ void *context) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+ #ifdef CONFIG_PM_SLEEP
+/**
+ * __acpi_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system.
+ * @target_state: System state the device is supposed to wake up from.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
+ bool enable)
+{
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, target_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+ int error;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+ return -ENODEV;
+ }
+
+ error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+ enable);
+ if (!error)
+ dev_info(dev, "System wakeup %s by ACPI\n",
+ enable ? "enabled" : "disabled");
+
+ return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
+ * @dev: Device to get the ACPI node for.
+ */
+static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ?
+ adev : NULL;
+}
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+ u32 system_state)
+{
+ int power_state;
+
+ if (!acpi_device_power_manageable(adev))
+ return 0;
+
+ power_state = acpi_device_power_state(dev, adev, system_state,
+ ACPI_STATE_D3, NULL);
+ if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
+ return -EIO;
+
+ return acpi_device_set_power(adev, power_state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+ return acpi_device_power_manageable(adev) ?
+ acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism. Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ bool remote_wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+ PM_QOS_FLAGS_NONE;
+ error = __acpi_device_run_wake(adev, remote_wakeup);
+ if (remote_wakeup && error)
+ return -EAGAIN;
+
+ error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ if (error)
+ __acpi_device_run_wake(adev, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time. Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ __acpi_device_run_wake(adev, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+ int ret = pm_generic_runtime_suspend(dev);
+ return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+ int ret = acpi_dev_runtime_resume(dev);
+ return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism. Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ u32 target_state;
+ bool wakeup;
+ int error;
+
+ if (!adev)
+ return 0;
+
+ target_state = acpi_target_system_state();
+ wakeup = device_may_wakeup(dev);
+ error = __acpi_device_sleep_wake(adev, target_state, wakeup);
+ if (wakeup && error)
+ return error;
+
+ error = acpi_dev_pm_low_power(dev, adev, target_state);
+ if (error)
+ __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state. Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+ int error;
+
+ if (!adev)
+ return 0;
+
+ error = acpi_dev_pm_full_power(adev);
+ __acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+ return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+ /*
+ * Follow PCI and resume devices suspended at run time before running
+ * their system suspend callbacks.
+ */
+ pm_runtime_resume(dev);
+ return pm_generic_prepare(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+ int ret = pm_generic_suspend_late(dev);
+ return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+ int ret = acpi_dev_resume_early(dev);
+ return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+ .ops = {
+#ifdef CONFIG_PM_RUNTIME
+ .runtime_suspend = acpi_subsys_runtime_suspend,
+ .runtime_resume = acpi_subsys_runtime_resume,
+ .runtime_idle = pm_generic_runtime_idle,
+#endif
+#ifdef CONFIG_PM_SLEEP
+ .prepare = acpi_subsys_prepare,
+ .suspend_late = acpi_subsys_suspend_late,
+ .resume_early = acpi_subsys_resume_early,
+ .poweroff_late = acpi_subsys_suspend_late,
+ .restore_early = acpi_subsys_resume_early,
+#endif
+ },
+};
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain. If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+ if (!adev)
+ return -ENODEV;
+
+ if (dev->pm_domain)
+ return -EEXIST;
+
+ acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
+ dev->pm_domain = &acpi_general_pm_domain;
+ if (power_on) {
+ acpi_dev_pm_full_power(adev);
+ __acpi_device_run_wake(adev, false);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier. If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+ struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+ if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+ dev->pm_domain = NULL;
+ acpi_remove_pm_notifier(adev, acpi_wakeup_device);
+ if (power_off) {
+ /*
+ * If the device's PM QoS resume latency limit or flags
+ * have been exposed to user space, they have to be
+ * hidden at this point, so that they don't affect the
+ * choice of the low-power state to put the device into.
+ */
+ dev_pm_qos_hide_latency_limit(dev);
+ dev_pm_qos_hide_flags(dev);
+ __acpi_device_run_wake(adev, false);
+ acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/stddef.h>
+#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
struct acpi_object_list arg_list;
union acpi_object arg;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_get_name(ds->handle, ACPI_FULL_PATHNAME, &name_buffer);
-
- printk(KERN_INFO PREFIX "%s - %s\n",
- (char *)name_buffer.pointer, dock ? "docking" : "undocking");
+ acpi_handle_info(ds->handle, "%s\n", dock ? "docking" : "undocking");
/* _DCK method has one argument */
arg_list.count = 1;
arg.integer.value = dock;
status = acpi_evaluate_object(ds->handle, "_DCK", &arg_list, &buffer);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
- ACPI_EXCEPTION((AE_INFO, status, "%s - failed to execute"
- " _DCK\n", (char *)name_buffer.pointer));
+ acpi_handle_err(ds->handle, "Failed to execute _DCK (0x%x)\n",
+ status);
kfree(buffer.pointer);
- kfree(name_buffer.pointer);
}
static inline void dock(struct dock_station *ds)
status = acpi_evaluate_object(ds->handle, "_LCK", &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
if (lock)
- printk(KERN_WARNING PREFIX "Locking device failed\n");
+ acpi_handle_warn(ds->handle,
+ "Locking device failed (0x%x)\n", status);
else
- printk(KERN_WARNING PREFIX "Unlocking device failed\n");
+ acpi_handle_warn(ds->handle,
+ "Unlocking device failed (0x%x)\n", status);
}
}
dock_lock(ds, 0);
eject_dock(ds);
if (dock_present(ds)) {
- printk(KERN_ERR PREFIX "Unable to undock!\n");
+ acpi_handle_err(ds->handle, "Unable to undock!\n");
return -EBUSY;
}
complete_undock(ds);
begin_dock(ds);
dock(ds);
if (!dock_present(ds)) {
- printk(KERN_ERR PREFIX "Unable to dock!\n");
+ acpi_handle_err(handle, "Unable to dock!\n");
complete_dock(ds);
break;
}
dock_event(ds, event, UNDOCK_EVENT);
break;
default:
- printk(KERN_ERR PREFIX "Unknown dock event %d\n", event);
+ acpi_handle_err(handle, "Unknown dock event %d\n", event);
}
}
sysfs_remove_group(&dd->dev.kobj, &dock_attribute_group);
err_unregister:
platform_device_unregister(dd);
- printk(KERN_ERR "%s encountered error %d\n", __func__, ret);
+ acpi_handle_err(handle, "%s encountered error %d\n", __func__, ret);
return ret;
}
}
/**
- * find_dock - look for a dock station
+ * find_dock_and_bay - look for dock stations and bays
* @handle: acpi handle of a device
* @lvl: unused
- * @context: counter of dock stations found
+ * @context: unused
* @rv: unused
*
- * This is called by acpi_walk_namespace to look for dock stations.
+ * This is called by acpi_walk_namespace to look for dock stations and bays.
*/
static __init acpi_status
-find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
+find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- if (is_dock(handle))
+ if (is_dock(handle) || is_ejectable_bay(handle))
dock_add(handle);
return AE_OK;
}
-static __init acpi_status
-find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
- /* If bay is a dock, it's already handled */
- if (is_ejectable_bay(handle) && !is_dock(handle))
- dock_add(handle);
- return AE_OK;
-}
-
static int __init dock_init(void)
{
if (acpi_disabled)
return 0;
- /* look for a dock station */
+ /* look for dock stations and bays */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_dock, NULL, NULL, NULL);
+ ACPI_UINT32_MAX, find_dock_and_bay, NULL, NULL, NULL);
- /* look for bay */
- acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_bay, NULL, NULL, NULL);
if (!dock_station_count) {
- printk(KERN_INFO PREFIX "No dock devices found.\n");
+ pr_info(PREFIX "No dock devices found.\n");
return 0;
}
register_acpi_bus_notifier(&dock_acpi_notifier);
- printk(KERN_INFO PREFIX "%s: %d docks/bays found\n",
+ pr_info(PREFIX "%s: %d docks/bays found\n",
ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count);
return 0;
}
{
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&ec->curr_lock, flags);
+ spin_lock_irqsave(&ec->lock, flags);
if (!ec->curr || ec->curr->done)
ret = 1;
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
return ret;
}
static void advance_transaction(struct acpi_ec *ec, u8 status)
{
unsigned long flags;
- spin_lock_irqsave(&ec->curr_lock, flags);
- if (!ec->curr)
+ struct transaction *t = ec->curr;
+
+ spin_lock_irqsave(&ec->lock, flags);
+ if (!t)
goto unlock;
- if (ec->curr->wlen > ec->curr->wi) {
+ if (t->wlen > t->wi) {
if ((status & ACPI_EC_FLAG_IBF) == 0)
acpi_ec_write_data(ec,
- ec->curr->wdata[ec->curr->wi++]);
+ t->wdata[t->wi++]);
else
goto err;
- } else if (ec->curr->rlen > ec->curr->ri) {
+ } else if (t->rlen > t->ri) {
if ((status & ACPI_EC_FLAG_OBF) == 1) {
- ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec);
- if (ec->curr->rlen == ec->curr->ri)
- ec->curr->done = true;
+ t->rdata[t->ri++] = acpi_ec_read_data(ec);
+ if (t->rlen == t->ri)
+ t->done = true;
} else
goto err;
- } else if (ec->curr->wlen == ec->curr->wi &&
+ } else if (t->wlen == t->wi &&
(status & ACPI_EC_FLAG_IBF) == 0)
- ec->curr->done = true;
+ t->done = true;
goto unlock;
err:
- /* false interrupt, state didn't change */
- if (in_interrupt())
- ++ec->curr->irq_count;
+ /*
+ * If SCI bit is set, then don't think it's a false IRQ
+ * otherwise will take a not handled IRQ as a false one.
+ */
+ if (in_interrupt() && !(status & ACPI_EC_FLAG_SCI))
+ ++t->irq_count;
+
unlock:
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
}
static int acpi_ec_sync_query(struct acpi_ec *ec);
if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
break;
pr_debug(PREFIX "controller reset, restart transaction\n");
- spin_lock_irqsave(&ec->curr_lock, flags);
+ spin_lock_irqsave(&ec->lock, flags);
start_transaction(ec);
- spin_unlock_irqrestore(&ec->curr_lock, flags);
+ spin_unlock_irqrestore(&ec->lock, flags);
}
return -ETIME;
}
if (EC_FLAGS_MSI)
udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
- spin_lock_irqsave(&ec->curr_lock, tmp);
+ spin_lock_irqsave(&ec->lock, tmp);
/* following two actions should be kept atomic */
ec->curr = t;
start_transaction(ec);
if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
- spin_unlock_irqrestore(&ec->curr_lock, tmp);
+ spin_unlock_irqrestore(&ec->lock, tmp);
ret = ec_poll(ec);
- spin_lock_irqsave(&ec->curr_lock, tmp);
+ spin_lock_irqsave(&ec->lock, tmp);
ec->curr = NULL;
- spin_unlock_irqrestore(&ec->curr_lock, tmp);
+ spin_unlock_irqrestore(&ec->lock, tmp);
return ret;
}
return -EINVAL;
if (t->rdata)
memset(t->rdata, 0, t->rlen);
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
if (test_bit(EC_FLAGS_BLOCKED, &ec->flags)) {
status = -EINVAL;
goto unlock;
status = -ETIME;
goto end;
}
- pr_debug(PREFIX "transaction start\n");
+ pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n",
+ t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
/* It has to be disabled, so that it doesn't trigger. */
/* It is safe to enable the GPE outside of the transaction. */
acpi_enable_gpe(NULL, ec->gpe);
} else if (t->irq_count > ec_storm_threshold) {
- pr_info(PREFIX "GPE storm detected, "
- "transactions will use polling mode\n");
+ pr_info(PREFIX "GPE storm detected(%d GPEs), "
+ "transactions will use polling mode\n",
+ t->irq_count);
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
pr_debug(PREFIX "transaction end\n");
if (ec->global_lock)
acpi_release_global_lock(glk);
unlock:
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
return status;
}
EXPORT_SYMBOL(ec_burst_disable);
-int ec_read(u8 addr, u8 * val)
+int ec_read(u8 addr, u8 *val)
{
int err;
u8 temp_data;
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
/* Prevent transactions from being carried out */
set_bit(EC_FLAGS_BLOCKED, &ec->flags);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
void acpi_ec_unblock_transactions(void)
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
/* Allow transactions to be carried out again */
clear_bit(EC_FLAGS_BLOCKED, &ec->flags);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
void acpi_ec_unblock_transactions_early(void)
handler->handle = handle;
handler->func = func;
handler->data = data;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_add(&handler->node, &ec->list);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
return 0;
}
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
struct acpi_ec_query_handler *handler, *tmp;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
if (query_bit == handler->query_bit) {
list_del(&handler->node);
kfree(handler);
}
}
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
struct acpi_ec *ec = ec_cxt;
if (!ec)
return;
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
acpi_ec_sync_query(ec);
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
}
static int ec_check_sci(struct acpi_ec *ec, u8 state)
u32 gpe_number, void *data)
{
struct acpi_ec *ec = data;
+ u8 status = acpi_ec_read_status(ec);
- pr_debug(PREFIX "~~~> interrupt\n");
+ pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status);
- advance_transaction(ec, acpi_ec_read_status(ec));
+ advance_transaction(ec, status);
if (ec_transaction_done(ec) &&
(acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
wake_up(&ec->wait);
if (!ec)
return NULL;
ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
- mutex_init(&ec->lock);
+ mutex_init(&ec->mutex);
init_waitqueue_head(&ec->wait);
INIT_LIST_HEAD(&ec->list);
- spin_lock_init(&ec->curr_lock);
+ spin_lock_init(&ec->lock);
return ec;
}
ec = acpi_driver_data(device);
ec_remove_handlers(ec);
- mutex_lock(&ec->lock);
+ mutex_lock(&ec->mutex);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
list_del(&handler->node);
kfree(handler);
}
- mutex_unlock(&ec->lock);
+ mutex_unlock(&ec->mutex);
release_region(ec->data_addr, 1);
release_region(ec->command_addr, 1);
device->driver_data = NULL;
{
struct acpi_device *acpi_dev;
acpi_status status;
- struct acpi_device_physical_node *physical_node;
+ struct acpi_device_physical_node *physical_node, *pn;
char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
int retval = -EINVAL;
- if (dev->archdata.acpi_handle) {
- dev_warn(dev, "Drivers changed 'acpi_handle'\n");
- return -EINVAL;
+ if (ACPI_HANDLE(dev)) {
+ if (handle) {
+ dev_warn(dev, "ACPI handle is already set\n");
+ return -EINVAL;
+ } else {
+ handle = ACPI_HANDLE(dev);
+ }
}
+ if (!handle)
+ return -EINVAL;
get_device(dev);
status = acpi_bus_get_device(handle, &acpi_dev);
if (ACPI_FAILURE(status))
goto err;
- physical_node = kzalloc(sizeof(struct acpi_device_physical_node),
- GFP_KERNEL);
+ physical_node = kzalloc(sizeof(*physical_node), GFP_KERNEL);
if (!physical_node) {
retval = -ENOMEM;
goto err;
}
mutex_lock(&acpi_dev->physical_node_lock);
+
+ /* Sanity check. */
+ list_for_each_entry(pn, &acpi_dev->physical_node_list, node)
+ if (pn->dev == dev) {
+ dev_warn(dev, "Already associated with ACPI node\n");
+ goto err_free;
+ }
+
/* allocate physical node id according to physical_node_id_bitmap */
physical_node->node_id =
find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
ACPI_MAX_PHYSICAL_NODE);
if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
retval = -ENOSPC;
- mutex_unlock(&acpi_dev->physical_node_lock);
- kfree(physical_node);
- goto err;
+ goto err_free;
}
set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
physical_node->dev = dev;
list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
acpi_dev->physical_node_count++;
+
mutex_unlock(&acpi_dev->physical_node_lock);
- dev->archdata.acpi_handle = handle;
+ if (!ACPI_HANDLE(dev))
+ ACPI_HANDLE_SET(dev, acpi_dev->handle);
if (!physical_node->node_id)
strcpy(physical_node_name, PHYSICAL_NODE_STRING);
return 0;
err:
+ ACPI_HANDLE_SET(dev, NULL);
put_device(dev);
return retval;
+
+ err_free:
+ mutex_unlock(&acpi_dev->physical_node_lock);
+ kfree(physical_node);
+ goto err;
}
static int acpi_unbind_one(struct device *dev)
acpi_status status;
struct list_head *node, *next;
- if (!dev->archdata.acpi_handle)
+ if (!ACPI_HANDLE(dev))
return 0;
- status = acpi_bus_get_device(dev->archdata.acpi_handle,
- &acpi_dev);
+ status = acpi_bus_get_device(ACPI_HANDLE(dev), &acpi_dev);
if (ACPI_FAILURE(status))
goto err;
sysfs_remove_link(&acpi_dev->dev.kobj, physical_node_name);
sysfs_remove_link(&dev->kobj, "firmware_node");
- dev->archdata.acpi_handle = NULL;
+ ACPI_HANDLE_SET(dev, NULL);
/* acpi_bind_one increase refcnt by one */
put_device(dev);
kfree(entry);
acpi_handle handle;
int ret = -EINVAL;
+ ret = acpi_bind_one(dev, NULL);
+ if (!ret)
+ goto out;
+
if (!dev->bus || !dev->parent) {
/* bridge devices genernally haven't bus or parent */
ret = acpi_find_bridge_device(dev, &handle);
}
if ((ret = type->find_device(dev, &handle)) != 0)
DBG("Can't get handler for %s\n", dev_name(dev));
- end:
+ end:
if (!ret)
acpi_bind_one(dev, handle);
+ out:
#if ACPI_GLUE_DEBUG
if (!ret) {
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_get_name(dev->archdata.acpi_handle,
- ACPI_FULL_PATHNAME, &buffer);
+ acpi_get_name(dev->acpi_handle, ACPI_FULL_PATHNAME, &buffer);
DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
kfree(buffer.pointer);
} else
return 0;
}
-static int __devexit acpi_hed_remove(struct acpi_device *device, int type)
+static int acpi_hed_remove(struct acpi_device *device, int type)
{
hed_handle = NULL;
return 0;
unsigned long data_addr;
unsigned long global_lock;
unsigned long flags;
- struct mutex lock;
+ struct mutex mutex;
wait_queue_head_t wait;
struct list_head list;
struct transaction *curr;
- spinlock_t curr_lock;
+ spinlock_t lock;
};
extern struct acpi_ec *first_ec;
static inline void suspend_nvs_restore(void) {}
#endif
+/*--------------------------------------------------------------------------
+ Platform bus support
+ -------------------------------------------------------------------------- */
+struct platform_device;
+
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
+
#endif /* _ACPI_INTERNAL_H_ */
* having a static work_struct.
*/
- dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
+ dpc = kzalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
if (!dpc)
return AE_NO_MEMORY;
* because the hotplug code may call driver .remove() functions,
* which invoke flush_scheduled_work/acpi_os_wait_events_complete
* to flush these workqueues.
+ *
+ * To prevent lockdep from complaining unnecessarily, make sure that
+ * there is a different static lockdep key for each workqueue by using
+ * INIT_WORK() for each of them separately.
*/
- queue = hp ? kacpi_hotplug_wq :
- (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
- dpc->wait = hp ? 1 : 0;
-
- if (queue == kacpi_hotplug_wq)
+ if (hp) {
+ queue = kacpi_hotplug_wq;
+ dpc->wait = 1;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- else if (queue == kacpi_notify_wq)
+ } else if (type == OSL_NOTIFY_HANDLER) {
+ queue = kacpi_notify_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
- else
+ } else {
+ queue = kacpid_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+ }
/*
* On some machines, a software-initiated SMI causes corruption unless
{
return __acpi_os_execute(0, function, context, 1);
}
+EXPORT_SYMBOL(acpi_os_hotplug_execute);
void acpi_os_wait_events_complete(void)
{
*/
if (gsi < 0) {
u32 dev_gsi;
- dev_warn(&dev->dev, "PCI INT %c: no GSI", pin_name(pin));
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF) &&
(acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
- printk(" - using ISA IRQ %d\n", dev->irq);
+ dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
+ pin_name(pin), dev->irq);
acpi_register_gsi(&dev->dev, dev_gsi,
ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
- return 0;
} else {
- printk("\n");
- return 0;
+ dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
+ pin_name(pin));
}
+ return 0;
}
rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
return 0;
}
-/* FIXME: implement x86/x86_64 version */
-void __attribute__ ((weak)) acpi_unregister_gsi(u32 i)
-{
-}
-
void acpi_pci_irq_disable(struct pci_dev *dev)
{
struct acpi_prt_entry *entry;
return ret;
no_power_resource:
- printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!");
+ printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!\n");
return -ENODEV;
}
EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
struct list_head *node, *next;
char strbuf[5];
char str[5] = "";
- unsigned int len = count;
- if (len > 4)
- len = 4;
- if (len < 0)
- return -EFAULT;
+ if (count > 4)
+ count = 4;
- if (copy_from_user(strbuf, buffer, len))
+ if (copy_from_user(strbuf, buffer, count))
return -EFAULT;
- strbuf[len] = '\0';
+ strbuf[count] = '\0';
sscanf(strbuf, "%s", str);
mutex_lock(&acpi_device_lock);
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <asm/io.h>
#include <asm/cpu.h>
/* Declared with "Processor" statement; match ProcessorID */
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ dev_err(&device->dev,
+ "Failed to evaluate processor object (0x%x)\n",
+ status);
return -ENODEV;
}
status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
NULL, &value);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Evaluating processor _UID [%#x]\n", status);
+ dev_err(&device->dev,
+ "Failed to evaluate processor _UID (0x%x)\n",
+ status);
return -ENODEV;
}
device_declaration = 1;
if (!object.processor.pblk_address)
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
else if (object.processor.pblk_length != 6)
- printk(KERN_ERR PREFIX "Invalid PBLK length [%d]\n",
+ dev_err(&device->dev, "Invalid PBLK length [%d]\n",
object.processor.pblk_length);
else {
pr->throttling.address = object.processor.pblk_address;
* Initialize missing things
*/
if (pr->flags.need_hotplug_init) {
- printk(KERN_INFO "Will online and init hotplugged "
- "CPU: %d\n", pr->id);
+ pr_info("Will online and init hotplugged CPU: %d\n",
+ pr->id);
WARN(acpi_processor_start(pr), "Failed to start CPU:"
" %d\n", pr->id);
pr->flags.need_hotplug_init = 0;
&pr->cdev->device.kobj,
"thermal_cooling");
if (result) {
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ dev_err(&device->dev,
+ "Failed to create sysfs link 'thermal_cooling'\n");
goto err_thermal_unregister;
}
result = sysfs_create_link(&pr->cdev->device.kobj,
&device->dev.kobj,
"device");
if (result) {
- printk(KERN_ERR PREFIX "Create sysfs link\n");
+ dev_err(&pr->cdev->device,
+ "Failed to create sysfs link 'device'\n");
goto err_remove_sysfs_thermal;
}
*/
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
- printk(KERN_WARNING "BIOS reported wrong ACPI id "
- "for the processor\n");
+ dev_warn(&device->dev,
+ "BIOS reported wrong ACPI id %d for the processor\n",
+ pr->id);
result = -ENODEV;
goto err_free_cpumask;
}
static void acpi_processor_hotplug_notify(acpi_handle handle,
u32 event, void *data)
{
- struct acpi_processor *pr;
struct acpi_device *device = NULL;
+ struct acpi_eject_event *ej_event = NULL;
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
int result;
result = acpi_processor_device_add(handle, &device);
if (result) {
- printk(KERN_ERR PREFIX "Unable to add the device\n");
+ acpi_handle_err(handle, "Unable to add the device\n");
break;
}
"received ACPI_NOTIFY_EJECT_REQUEST\n"));
if (acpi_bus_get_device(handle, &device)) {
- printk(KERN_ERR PREFIX
- "Device don't exist, dropping EJECT\n");
+ acpi_handle_err(handle,
+ "Device don't exist, dropping EJECT\n");
break;
}
- pr = acpi_driver_data(device);
- if (!pr) {
- printk(KERN_ERR PREFIX
- "Driver data is NULL, dropping EJECT\n");
+ if (!acpi_driver_data(device)) {
+ acpi_handle_err(handle,
+ "Driver data is NULL, dropping EJECT\n");
break;
}
- /* REVISIT: update when eject is supported */
- ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
- break;
+ ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+ if (!ej_event) {
+ acpi_handle_err(handle, "No memory, dropping EJECT\n");
+ break;
+ }
+
+ ej_event->handle = handle;
+ ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+ (void *)ej_event);
+
+ /* eject is performed asynchronously */
+ return;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
* and do it when the CPU gets online the first time
* TBD: Cleanup above functions and try to do this more elegant.
*/
- printk(KERN_INFO "CPU %d got hotplugged\n", pr->id);
+ pr_info("CPU %d got hotplugged\n", pr->id);
pr->flags.need_hotplug_init = 1;
return AE_OK;
if (cpu_online(pr->id))
cpu_down(pr->id);
+ get_online_cpus();
+ /*
+ * The cpu might become online again at this point. So we check whether
+ * the cpu has been onlined or not. If the cpu became online, it means
+ * that someone wants to use the cpu. So acpi_processor_handle_eject()
+ * returns -EAGAIN.
+ */
+ if (unlikely(cpu_online(pr->id))) {
+ put_online_cpus();
+ pr_warn("Failed to remove CPU %d, because other task "
+ "brought the CPU back online\n", pr->id);
+ return -EAGAIN;
+ }
arch_unregister_cpu(pr->id);
acpi_unmap_lsapic(pr->id);
+ put_online_cpus();
return (0);
}
#else
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- ktime_t kt1, kt2;
- s64 idle_time;
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
- local_irq_disable();
-
-
lapic_timer_state_broadcast(pr, cx, 1);
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
- local_irq_enable();
lapic_timer_state_broadcast(pr, cx, 0);
return index;
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
- ktime_t kt1, kt2;
- s64 idle_time_ns;
- s64 idle_time;
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
- local_irq_disable();
-
-
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
return -EINVAL;
}
}
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
- kt1 = ktime_get_real();
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
- idle_time = idle_time_ns;
- do_div(idle_time, NSEC_PER_USEC);
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
+ sched_clock_idle_wakeup_event(0);
- /* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(idle_time_ns);
-
- local_irq_enable();
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
struct acpi_processor *pr;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
- ktime_t kt1, kt2;
- s64 idle_time_ns;
- s64 idle_time;
-
pr = __this_cpu_read(processors);
- dev->last_residency = 0;
if (unlikely(!pr))
return -EINVAL;
return drv->states[drv->safe_state_index].enter(dev,
drv, drv->safe_state_index);
} else {
- local_irq_disable();
acpi_safe_halt();
- local_irq_enable();
return -EBUSY;
}
}
- local_irq_disable();
-
-
if (cx->entry_method != ACPI_CSTATE_FFH) {
current_thread_info()->status &= ~TS_POLLING;
/*
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
- local_irq_enable();
return -EINVAL;
}
}
*/
lapic_timer_state_broadcast(pr, cx, 1);
- kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
c3_cpu_count--;
raw_spin_unlock(&c3_lock);
}
- kt2 = ktime_get_real();
- idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
- idle_time = idle_time_ns;
- do_div(idle_time, NSEC_PER_USEC);
-
- /* Update device last_residency*/
- dev->last_residency = (int)idle_time;
- /* Tell the scheduler how much we idled: */
- sched_clock_idle_wakeup_event(idle_time_ns);
+ sched_clock_idle_wakeup_event(0);
- local_irq_enable();
if (cx->entry_method != ACPI_CSTATE_FFH)
current_thread_info()->status |= TS_POLLING;
struct cpuidle_driver acpi_idle_driver = {
.name = "acpi_idle",
.owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
};
/**
--- /dev/null
+/*
+ * drivers/acpi/resource.c - ACPI device resources interpretation.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_X86
+#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
+#else
+#define valid_IRQ(i) (true)
+#endif
+
+static unsigned long acpi_dev_memresource_flags(u64 len, u8 write_protect,
+ bool window)
+{
+ unsigned long flags = IORESOURCE_MEM;
+
+ if (len == 0)
+ flags |= IORESOURCE_DISABLED;
+
+ if (write_protect == ACPI_READ_WRITE_MEMORY)
+ flags |= IORESOURCE_MEM_WRITEABLE;
+
+ if (window)
+ flags |= IORESOURCE_WINDOW;
+
+ return flags;
+}
+
+static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
+ u8 write_protect)
+{
+ res->start = start;
+ res->end = start + len - 1;
+ res->flags = acpi_dev_memresource_flags(len, write_protect, false);
+}
+
+/**
+ * acpi_dev_resource_memory - Extract ACPI memory resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents a memory resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
+{
+ struct acpi_resource_memory24 *memory24;
+ struct acpi_resource_memory32 *memory32;
+ struct acpi_resource_fixed_memory32 *fixed_memory32;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ memory24 = &ares->data.memory24;
+ acpi_dev_get_memresource(res, memory24->minimum,
+ memory24->address_length,
+ memory24->write_protect);
+ break;
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ memory32 = &ares->data.memory32;
+ acpi_dev_get_memresource(res, memory32->minimum,
+ memory32->address_length,
+ memory32->write_protect);
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ fixed_memory32 = &ares->data.fixed_memory32;
+ acpi_dev_get_memresource(res, fixed_memory32->address,
+ fixed_memory32->address_length,
+ fixed_memory32->write_protect);
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
+
+static unsigned int acpi_dev_ioresource_flags(u64 start, u64 end, u8 io_decode,
+ bool window)
+{
+ int flags = IORESOURCE_IO;
+
+ if (io_decode == ACPI_DECODE_16)
+ flags |= IORESOURCE_IO_16BIT_ADDR;
+
+ if (start > end || end >= 0x10003)
+ flags |= IORESOURCE_DISABLED;
+
+ if (window)
+ flags |= IORESOURCE_WINDOW;
+
+ return flags;
+}
+
+static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
+ u8 io_decode)
+{
+ u64 end = start + len - 1;
+
+ res->start = start;
+ res->end = end;
+ res->flags = acpi_dev_ioresource_flags(start, end, io_decode, false);
+}
+
+/**
+ * acpi_dev_resource_io - Extract ACPI I/O resource information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an I/O resource and
+ * if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
+{
+ struct acpi_resource_io *io;
+ struct acpi_resource_fixed_io *fixed_io;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_IO:
+ io = &ares->data.io;
+ acpi_dev_get_ioresource(res, io->minimum,
+ io->address_length,
+ io->io_decode);
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_IO:
+ fixed_io = &ares->data.fixed_io;
+ acpi_dev_get_ioresource(res, fixed_io->address,
+ fixed_io->address_length,
+ ACPI_DECODE_10);
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
+
+/**
+ * acpi_dev_resource_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an address space resource
+ * and if that's the case, use the information in it to populate the generic
+ * resource object pointed to by @res.
+ */
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+ struct resource *res)
+{
+ acpi_status status;
+ struct acpi_resource_address64 addr;
+ bool window;
+ u64 len;
+ u8 io_decode;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ break;
+ default:
+ return false;
+ }
+
+ status = acpi_resource_to_address64(ares, &addr);
+ if (ACPI_FAILURE(status))
+ return true;
+
+ res->start = addr.minimum;
+ res->end = addr.maximum;
+ window = addr.producer_consumer == ACPI_PRODUCER;
+
+ switch(addr.resource_type) {
+ case ACPI_MEMORY_RANGE:
+ len = addr.maximum - addr.minimum + 1;
+ res->flags = acpi_dev_memresource_flags(len,
+ addr.info.mem.write_protect,
+ window);
+ break;
+ case ACPI_IO_RANGE:
+ io_decode = addr.granularity == 0xfff ?
+ ACPI_DECODE_10 : ACPI_DECODE_16;
+ res->flags = acpi_dev_ioresource_flags(addr.minimum,
+ addr.maximum,
+ io_decode, window);
+ break;
+ case ACPI_BUS_NUMBER_RANGE:
+ res->flags = IORESOURCE_BUS;
+ break;
+ default:
+ res->flags = 0;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
+
+/**
+ * acpi_dev_resource_ext_address_space - Extract ACPI address space information.
+ * @ares: Input ACPI resource object.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an extended address space
+ * resource and if that's the case, use the information in it to populate the
+ * generic resource object pointed to by @res.
+ */
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+ struct resource *res)
+{
+ struct acpi_resource_extended_address64 *ext_addr;
+ bool window;
+ u64 len;
+ u8 io_decode;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
+ return false;
+
+ ext_addr = &ares->data.ext_address64;
+
+ res->start = ext_addr->minimum;
+ res->end = ext_addr->maximum;
+ window = ext_addr->producer_consumer == ACPI_PRODUCER;
+
+ switch(ext_addr->resource_type) {
+ case ACPI_MEMORY_RANGE:
+ len = ext_addr->maximum - ext_addr->minimum + 1;
+ res->flags = acpi_dev_memresource_flags(len,
+ ext_addr->info.mem.write_protect,
+ window);
+ break;
+ case ACPI_IO_RANGE:
+ io_decode = ext_addr->granularity == 0xfff ?
+ ACPI_DECODE_10 : ACPI_DECODE_16;
+ res->flags = acpi_dev_ioresource_flags(ext_addr->minimum,
+ ext_addr->maximum,
+ io_decode, window);
+ break;
+ case ACPI_BUS_NUMBER_RANGE:
+ res->flags = IORESOURCE_BUS;
+ break;
+ default:
+ res->flags = 0;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
+
+/**
+ * acpi_dev_irq_flags - Determine IRQ resource flags.
+ * @triggering: Triggering type as provided by ACPI.
+ * @polarity: Interrupt polarity as provided by ACPI.
+ * @shareable: Whether or not the interrupt is shareable.
+ */
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
+{
+ unsigned long flags;
+
+ if (triggering == ACPI_LEVEL_SENSITIVE)
+ flags = polarity == ACPI_ACTIVE_LOW ?
+ IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
+ else
+ flags = polarity == ACPI_ACTIVE_LOW ?
+ IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
+
+ if (shareable == ACPI_SHARED)
+ flags |= IORESOURCE_IRQ_SHAREABLE;
+
+ return flags | IORESOURCE_IRQ;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
+
+static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
+{
+ res->start = gsi;
+ res->end = gsi;
+ res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED;
+}
+
+static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
+ u8 triggering, u8 polarity, u8 shareable)
+{
+ int irq, p, t;
+
+ if (!valid_IRQ(gsi)) {
+ acpi_dev_irqresource_disabled(res, gsi);
+ return;
+ }
+
+ /*
+ * In IO-APIC mode, use overrided attribute. Two reasons:
+ * 1. BIOS bug in DSDT
+ * 2. BIOS uses IO-APIC mode Interrupt Source Override
+ */
+ if (!acpi_get_override_irq(gsi, &t, &p)) {
+ u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+ u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+
+ if (triggering != trig || polarity != pol) {
+ pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
+ t ? "edge" : "level", p ? "low" : "high");
+ triggering = trig;
+ polarity = pol;
+ }
+ }
+
+ res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
+ irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
+ if (irq >= 0) {
+ res->start = irq;
+ res->end = irq;
+ } else {
+ acpi_dev_irqresource_disabled(res, gsi);
+ }
+}
+
+/**
+ * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
+ * @ares: Input ACPI resource object.
+ * @index: Index into the array of GSIs represented by the resource.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an interrupt resource
+ * and @index does not exceed the resource's interrupt count (true is returned
+ * in that case regardless of the results of the other checks)). If that's the
+ * case, register the GSI corresponding to @index from the array of interrupts
+ * represented by the resource and populate the generic resource object pointed
+ * to by @res accordingly. If the registration of the GSI is not successful,
+ * IORESOURCE_DISABLED will be set it that object's flags.
+ */
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+ struct resource *res)
+{
+ struct acpi_resource_irq *irq;
+ struct acpi_resource_extended_irq *ext_irq;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_IRQ:
+ /*
+ * Per spec, only one interrupt per descriptor is allowed in
+ * _CRS, but some firmware violates this, so parse them all.
+ */
+ irq = &ares->data.irq;
+ if (index >= irq->interrupt_count) {
+ acpi_dev_irqresource_disabled(res, 0);
+ return false;
+ }
+ acpi_dev_get_irqresource(res, irq->interrupts[index],
+ irq->triggering, irq->polarity,
+ irq->sharable);
+ break;
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ ext_irq = &ares->data.extended_irq;
+ if (index >= ext_irq->interrupt_count) {
+ acpi_dev_irqresource_disabled(res, 0);
+ return false;
+ }
+ acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
+ ext_irq->triggering, ext_irq->polarity,
+ ext_irq->sharable);
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
+
+/**
+ * acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
+ * @list: The head of the resource list to free.
+ */
+void acpi_dev_free_resource_list(struct list_head *list)
+{
+ struct resource_list_entry *rentry, *re;
+
+ list_for_each_entry_safe(rentry, re, list, node) {
+ list_del(&rentry->node);
+ kfree(rentry);
+ }
+}
+EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
+
+struct res_proc_context {
+ struct list_head *list;
+ int (*preproc)(struct acpi_resource *, void *);
+ void *preproc_data;
+ int count;
+ int error;
+};
+
+static acpi_status acpi_dev_new_resource_entry(struct resource *r,
+ struct res_proc_context *c)
+{
+ struct resource_list_entry *rentry;
+
+ rentry = kmalloc(sizeof(*rentry), GFP_KERNEL);
+ if (!rentry) {
+ c->error = -ENOMEM;
+ return AE_NO_MEMORY;
+ }
+ rentry->res = *r;
+ list_add_tail(&rentry->node, c->list);
+ c->count++;
+ return AE_OK;
+}
+
+static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
+ void *context)
+{
+ struct res_proc_context *c = context;
+ struct resource r;
+ int i;
+
+ if (c->preproc) {
+ int ret;
+
+ ret = c->preproc(ares, c->preproc_data);
+ if (ret < 0) {
+ c->error = ret;
+ return AE_CTRL_TERMINATE;
+ } else if (ret > 0) {
+ return AE_OK;
+ }
+ }
+
+ memset(&r, 0, sizeof(r));
+
+ if (acpi_dev_resource_memory(ares, &r)
+ || acpi_dev_resource_io(ares, &r)
+ || acpi_dev_resource_address_space(ares, &r)
+ || acpi_dev_resource_ext_address_space(ares, &r))
+ return acpi_dev_new_resource_entry(&r, c);
+
+ for (i = 0; acpi_dev_resource_interrupt(ares, i, &r); i++) {
+ acpi_status status;
+
+ status = acpi_dev_new_resource_entry(&r, c);
+ if (ACPI_FAILURE(status))
+ return status;
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_dev_get_resources - Get current resources of a device.
+ * @adev: ACPI device node to get the resources for.
+ * @list: Head of the resultant list of resources (must be empty).
+ * @preproc: The caller's preprocessing routine.
+ * @preproc_data: Pointer passed to the caller's preprocessing routine.
+ *
+ * Evaluate the _CRS method for the given device node and process its output by
+ * (1) executing the @preproc() rountine provided by the caller, passing the
+ * resource pointer and @preproc_data to it as arguments, for each ACPI resource
+ * returned and (2) converting all of the returned ACPI resources into struct
+ * resource objects if possible. If the return value of @preproc() in step (1)
+ * is different from 0, step (2) is not applied to the given ACPI resource and
+ * if that value is negative, the whole processing is aborted and that value is
+ * returned as the final error code.
+ *
+ * The resultant struct resource objects are put on the list pointed to by
+ * @list, that must be empty initially, as members of struct resource_list_entry
+ * objects. Callers of this routine should use %acpi_dev_free_resource_list() to
+ * free that list.
+ *
+ * The number of resources in the output list is returned on success, an error
+ * code reflecting the error condition is returned otherwise.
+ */
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+ int (*preproc)(struct acpi_resource *, void *),
+ void *preproc_data)
+{
+ struct res_proc_context c;
+ acpi_handle not_used;
+ acpi_status status;
+
+ if (!adev || !adev->handle || !list_empty(list))
+ return -EINVAL;
+
+ status = acpi_get_handle(adev->handle, METHOD_NAME__CRS, ¬_used);
+ if (ACPI_FAILURE(status))
+ return 0;
+
+ c.list = list;
+ c.preproc = preproc;
+ c.preproc_data = preproc_data;
+ c.count = 0;
+ c.error = 0;
+ status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
+ acpi_dev_process_resource, &c);
+ if (ACPI_FAILURE(status)) {
+ acpi_dev_free_resource_list(list);
+ return c.error ? c.error : -EIO;
+ }
+
+ return c.count;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_resources);
static const char *dummy_hid = "device";
+/*
+ * The following ACPI IDs are known to be suitable for representing as
+ * platform devices.
+ */
+static const struct acpi_device_id acpi_platform_device_ids[] = {
+
+ { "PNP0D40" },
+
+ { }
+};
+
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
DEFINE_MUTEX(acpi_device_lock);
struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
struct acpi_device *device;
acpi_handle handle = ej_event->handle;
+ acpi_handle temp;
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status = AE_OK;
goto err_out;
}
+ /* device has been freed */
+ device = NULL;
+
/* power off device */
status = acpi_evaluate_object(handle, "_PS3", NULL, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
printk(KERN_WARNING PREFIX
"Power-off device failed\n");
- if (device->flags.lockable) {
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_LCK", &temp))) {
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
kfree(context);
return;
}
+EXPORT_SYMBOL(acpi_bus_hot_remove_device);
static ssize_t
acpi_eject_store(struct device *d, struct device_attribute *attr,
}
static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
+static ssize_t acpi_device_uid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "%s\n", acpi_dev->pnp.unique_id);
+}
+static DEVICE_ATTR(uid, 0444, acpi_device_uid_show, NULL);
+
+static ssize_t acpi_device_adr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "0x%08x\n",
+ (unsigned int)(acpi_dev->pnp.bus_address));
+}
+static DEVICE_ATTR(adr, 0444, acpi_device_adr_show, NULL);
+
static ssize_t
acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
}
static DEVICE_ATTR(description, 0444, description_show, NULL);
+static ssize_t
+acpi_device_sun_show(struct device *dev, struct device_attribute *attr,
+ char *buf) {
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ return sprintf(buf, "%lu\n", acpi_dev->pnp.sun);
+}
+static DEVICE_ATTR(sun, 0444, acpi_device_sun_show, NULL);
+
static int acpi_device_setup_files(struct acpi_device *dev)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
acpi_status status;
acpi_handle temp;
+ unsigned long long sun;
int result = 0;
/*
goto end;
}
+ if (dev->flags.bus_address)
+ result = device_create_file(&dev->dev, &dev_attr_adr);
+ if (dev->pnp.unique_id)
+ result = device_create_file(&dev->dev, &dev_attr_uid);
+
+ status = acpi_evaluate_integer(dev->handle, "_SUN", NULL, &sun);
+ if (ACPI_SUCCESS(status)) {
+ dev->pnp.sun = (unsigned long)sun;
+ result = device_create_file(&dev->dev, &dev_attr_sun);
+ if (result)
+ goto end;
+ } else {
+ dev->pnp.sun = (unsigned long)-1;
+ }
+
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
* hot-removal function from userland.
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
+ status = acpi_get_handle(dev->handle, "_SUN", &temp);
+ if (ACPI_SUCCESS(status))
+ device_remove_file(&dev->dev, &dev_attr_sun);
+
+ if (dev->pnp.unique_id)
+ device_remove_file(&dev->dev, &dev_attr_uid);
+ if (dev->flags.bus_address)
+ device_remove_file(&dev->dev, &dev_attr_adr);
device_remove_file(&dev->dev, &dev_attr_modalias);
device_remove_file(&dev->dev, &dev_attr_hid);
if (dev->handle)
ACPI Bus operations
-------------------------------------------------------------------------- */
-int acpi_match_device_ids(struct acpi_device *device,
- const struct acpi_device_id *ids)
+static const struct acpi_device_id *__acpi_match_device(
+ struct acpi_device *device, const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
struct acpi_hardware_id *hwid;
* driver for it.
*/
if (!device->status.present)
- return -ENODEV;
+ return NULL;
for (id = ids; id->id[0]; id++)
list_for_each_entry(hwid, &device->pnp.ids, list)
if (!strcmp((char *) id->id, hwid->id))
- return 0;
+ return id;
- return -ENOENT;
+ return NULL;
+}
+
+/**
+ * acpi_match_device - Match a struct device against a given list of ACPI IDs
+ * @ids: Array of struct acpi_device_id object to match against.
+ * @dev: The device structure to match.
+ *
+ * Check if @dev has a valid ACPI handle and if there is a struct acpi_device
+ * object for that handle and use that object to match against a given list of
+ * device IDs.
+ *
+ * Return a pointer to the first matching ID on success or %NULL on failure.
+ */
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+ const struct device *dev)
+{
+ struct acpi_device *adev;
+
+ if (!ids || !ACPI_HANDLE(dev)
+ || ACPI_FAILURE(acpi_bus_get_device(ACPI_HANDLE(dev), &adev)))
+ return NULL;
+
+ return __acpi_match_device(adev, ids);
+}
+EXPORT_SYMBOL_GPL(acpi_match_device);
+
+int acpi_match_device_ids(struct acpi_device *device,
+ const struct acpi_device_id *ids)
+{
+ return __acpi_match_device(device, ids) ? 0 : -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
struct acpi_device *acpi_dev = to_acpi_device(dev);
acpi_free_ids(acpi_dev);
+ kfree(acpi_dev->pnp.unique_id);
kfree(acpi_dev);
}
* D3hot is only valid if _PR3 present.
*/
if (ps->resources.count ||
- (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
+ (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
ps->flags.valid = 1;
+ ps->flags.os_accessible = 1;
+ }
ps->power = -1; /* Unknown - driver assigned */
ps->latency = -1; /* Unknown - driver assigned */
if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
+ /* Presence of _PS3 or _PRx means we can put the device into D3 cold */
+ if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
+ device->power.flags.power_resources)
+ device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
+
acpi_bus_init_power(device);
return 0;
device->flags.ejectable = 1;
}
- /* Presence of _LCK indicates 'lockable' */
- status = acpi_get_handle(device->handle, "_LCK", &temp);
- if (ACPI_SUCCESS(status))
- device->flags.lockable = 1;
-
/* Power resources cannot be power manageable. */
if (device->device_type == ACPI_BUS_TYPE_POWER)
return 0;
{
acpi_status status;
struct acpi_device_info *info;
- struct acpica_device_id_list *cid_list;
+ struct acpi_pnp_device_id_list *cid_list;
int i;
switch (device->device_type) {
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
+ if (info->valid & ACPI_VALID_UID)
+ device->pnp.unique_id = kstrdup(info->unique_id.string,
+ GFP_KERNEL);
kfree(info);
*/
device = NULL;
acpi_bus_get_device(handle, &device);
- if (ops->acpi_op_add && !device)
+ if (ops->acpi_op_add && !device) {
acpi_add_single_object(&device, handle, type, sta, ops);
+ /* Is the device a known good platform device? */
+ if (device
+ && !acpi_match_device_ids(device, acpi_platform_device_ids))
+ acpi_create_platform_device(device);
+ }
if (!device)
return AE_CTRL_DEPTH;
#include <linux/reboot.h>
#include <linux/acpi.h>
#include <linux/module.h>
-#include <linux/pm_runtime.h>
#include <asm/io.h>
#ifdef CONFIG_ACPI_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+ return acpi_target_sleep_state;
+}
+
static bool pwr_btn_event_pending;
/*
nvs_nosave = true;
}
+/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * but says nothing about saving NVS during S3. Not all versions of Windows
+ * save NVS on S3 suspend either, and it is clear that not all systems need
+ * NVS to be saved at S3 time. To improve suspend/resume time, allow the
+ * user to disable saving NVS on S3 if their system does not require it, but
+ * continue to save/restore NVS for S4 as specified.
+ */
+static bool nvs_nosave_s3;
+
+void __init acpi_nvs_nosave_s3(void)
+{
+ nvs_nosave_s3 = true;
+}
+
/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
- error = nvs_nosave ? 0 : suspend_nvs_alloc();
+ error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
if (error)
return error;
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VPCEB1S1E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VGN-FW520F",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
return -EINVAL;
}
-#ifdef CONFIG_PM
-/**
- * acpi_pm_device_sleep_state - return preferred power state of ACPI device
- * in the system sleep state given by %acpi_target_sleep_state
- * @dev: device to examine; its driver model wakeup flags control
- * whether it should be able to wake up the system
- * @d_min_p: used to store the upper limit of allowed states range
- * @d_max_in: specify the lowest allowed states
- * Return value: preferred power state of the device on success, -ENODEV
- * (ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- * Find the lowest power (highest number) ACPI device power state that
- * device @dev can be in while the system is in the sleep state represented
- * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
- * able to wake up the system from this sleep state. If @d_min_p is set,
- * the highest power (lowest number) device power state of @dev allowed
- * in this system sleep state is stored at the location pointed to by it.
- *
- * The caller must ensure that @dev is valid before using this function.
- * The caller is also responsible for figuring out if the device is
- * supposed to be able to wake up the system and passing this information
- * via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
- acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
- struct acpi_device *adev;
- char acpi_method[] = "_SxD";
- unsigned long long d_min, d_max;
-
- if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
- return -EINVAL;
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- printk(KERN_DEBUG "ACPI handle has no context!\n");
- return -ENODEV;
- }
-
- acpi_method[2] = '0' + acpi_target_sleep_state;
- /*
- * If the sleep state is S0, the lowest limit from ACPI is D3,
- * but if the device has _S0W, we will use the value from _S0W
- * as the lowest limit from ACPI. Finally, we will constrain
- * the lowest limit with the specified one.
- */
- d_min = ACPI_STATE_D0;
- d_max = ACPI_STATE_D3;
-
- /*
- * If present, _SxD methods return the minimum D-state (highest power
- * state) we can use for the corresponding S-states. Otherwise, the
- * minimum D-state is D0 (ACPI 3.x).
- *
- * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
- * provided -- that's our fault recovery, we ignore retval.
- */
- if (acpi_target_sleep_state > ACPI_STATE_S0)
- acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-
- /*
- * If _PRW says we can wake up the system from the target sleep state,
- * the D-state returned by _SxD is sufficient for that (we assume a
- * wakeup-aware driver if wake is set). Still, if _SxW exists
- * (ACPI 3.x), it should return the maximum (lowest power) D-state that
- * can wake the system. _S0W may be valid, too.
- */
- if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) && adev->wakeup.flags.valid &&
- adev->wakeup.sleep_state >= acpi_target_sleep_state)) {
- acpi_status status;
-
- acpi_method[3] = 'W';
- status = acpi_evaluate_integer(handle, acpi_method, NULL,
- &d_max);
- if (ACPI_FAILURE(status)) {
- if (acpi_target_sleep_state != ACPI_STATE_S0 ||
- status != AE_NOT_FOUND)
- d_max = d_min;
- } else if (d_max < d_min) {
- /* Warn the user of the broken DSDT */
- printk(KERN_WARNING "ACPI: Wrong value from %s\n",
- acpi_method);
- /* Sanitize it */
- d_min = d_max;
- }
- }
-
- if (d_max_in < d_min)
- return -EINVAL;
- if (d_min_p)
- *d_min_p = d_min;
- /* constrain d_max with specified lowest limit (max number) */
- if (d_max > d_max_in) {
- for (d_max = d_max_in; d_max > d_min; d_max--) {
- if (adev->power.states[d_max].flags.valid)
- break;
- }
- }
- return d_max;
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
-{
- struct acpi_device *dev;
- acpi_handle handle;
-
- if (!device_run_wake(phys_dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(phys_dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
- dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
- __func__);
- return -ENODEV;
- }
-
- if (enable) {
- acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
- acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- } else {
- acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
- acpi_disable_wakeup_device_power(dev);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(acpi_pm_device_run_wake);
-
-/**
- * acpi_pm_device_sleep_wake - enable or disable the system wake-up
- * capability of given device
- * @dev: device to handle
- * @enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
- acpi_handle handle;
- struct acpi_device *adev;
- int error;
-
- if (!device_can_wakeup(dev))
- return -EINVAL;
-
- handle = DEVICE_ACPI_HANDLE(dev);
- if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
- dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
- return -ENODEV;
- }
-
- error = enable ?
- acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
- acpi_disable_wakeup_device_power(adev);
- if (!error)
- dev_info(dev, "wake-up capability %s by ACPI\n",
- enable ? "enabled" : "disabled");
-
- return error;
-}
-#endif /* CONFIG_PM_SLEEP */
-
static void acpi_power_off_prepare(void)
{
/* Prepare to power off the system */
return;
}
-static void acpi_gbl_event_handler(u32 event_type, acpi_handle device,
+static void acpi_global_event_handler(u32 event_type, acpi_handle device,
u32 event_number, void *context)
{
if (event_type == ACPI_EVENT_TYPE_GPE)
if (all_counters == NULL)
goto fail;
- status = acpi_install_global_event_handler(acpi_gbl_event_handler, NULL);
+ status = acpi_install_global_event_handler(acpi_global_event_handler, NULL);
if (ACPI_FAILURE(status))
goto fail;
}
}
+/*
+ * On some platforms, the AML code has dependency about
+ * the evaluating order of _TMP and _CRT/_HOT/_PSV/_ACx.
+ * 1. On HP Pavilion G4-1016tx, _TMP must be invoked after
+ * /_CRT/_HOT/_PSV/_ACx, or else system will be power off.
+ * 2. On HP Compaq 6715b/6715s, the return value of _PSV is 0
+ * if _TMP has never been evaluated.
+ *
+ * As this dependency is totally transparent to OS, evaluate
+ * all of them once, in the order of _CRT/_HOT/_PSV/_ACx,
+ * _TMP, before they are actually used.
+ */
+static void acpi_thermal_aml_dependency_fix(struct acpi_thermal *tz)
+{
+ acpi_handle handle = tz->device->handle;
+ unsigned long long value;
+ int i;
+
+ acpi_evaluate_integer(handle, "_CRT", NULL, &value);
+ acpi_evaluate_integer(handle, "_HOT", NULL, &value);
+ acpi_evaluate_integer(handle, "_PSV", NULL, &value);
+ for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+ char name[5] = { '_', 'A', 'C', ('0' + i), '\0' };
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, name, NULL, &value);
+ if (status == AE_NOT_FOUND)
+ break;
+ }
+ acpi_evaluate_integer(handle, "_TMP", NULL, &value);
+}
+
static int acpi_thermal_get_info(struct acpi_thermal *tz)
{
int result = 0;
if (!tz)
return -EINVAL;
+ acpi_thermal_aml_dependency_fix(tz);
+
/* Get trip points [_CRT, _PSV, etc.] (required) */
result = acpi_thermal_get_trip_points(tz);
if (result)
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/hardirq.h>
+#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#endif
}
EXPORT_SYMBOL(acpi_evaluate_hotplug_ost);
+
+/**
+ * acpi_handle_printk: Print message with ACPI prefix and object path
+ *
+ * This function is called through acpi_handle_<level> macros and prints
+ * a message with ACPI prefix and object path. This function acquires
+ * the global namespace mutex to obtain an object path. In interrupt
+ * context, it shows the object path as <n/a>.
+ */
+void
+acpi_handle_printk(const char *level, acpi_handle handle, const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ struct acpi_buffer buffer = {
+ .length = ACPI_ALLOCATE_BUFFER,
+ .pointer = NULL
+ };
+ const char *path;
+
+ va_start(args, fmt);
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (in_interrupt() ||
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer) != AE_OK)
+ path = "<n/a>";
+ else
+ path = buffer.pointer;
+
+ printk("%sACPI: %s: %pV", level, path, &vaf);
+
+ va_end(args);
+ kfree(buffer.pointer);
+}
+EXPORT_SYMBOL(acpi_handle_printk);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ahci_suspend(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct acpi_device *acpi_dev;
struct acpi_device_power_state *states;
- if (ap->flags & ATA_FLAG_ACPI_SATA)
- ata_dev = &ap->link.device[sdev->channel];
- else
+ if (ap->flags & ATA_FLAG_ACPI_SATA) {
+ if (!sata_pmp_attached(ap))
+ ata_dev = &ap->link.device[sdev->id];
+ else
+ ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id];
+ }
+ else {
ata_dev = &ap->link.device[sdev->id];
+ }
*handle = ata_dev_acpi_handle(ata_dev);
if (xfer_mode == t->mode)
return t;
+
+ WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
+ __func__, xfer_mode);
+
return NULL;
}
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
+ sdev->no_report_opcodes = 1;
+ sdev->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer() callback and
* it needs to see every deferred qc. Set dev_blocked to 1 to
return ret;
}
+ ret = clk_set_rate(acdev->clk, 166000000);
+ if (ret) {
+ dev_warn(acdev->host->dev, "clock set rate failed");
+ return ret;
+ }
+
spin_lock_irqsave(&acdev->host->lock, flags);
/* configure CF interface clock */
writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int arasan_cf_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
-static int __init ahci_highbank_probe(struct platform_device *pdev)
+static int __devinit ahci_highbank_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ahci_highbank_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
return 0;
}
+static int k2_sata_softreset(struct ata_link *link,
+ unsigned int *class, unsigned long deadline)
+{
+ u8 dmactl;
+ void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+ dmactl = readb(mmio + ATA_DMA_CMD);
+
+ /* Clear the start bit */
+ if (dmactl & ATA_DMA_START) {
+ dmactl &= ~ATA_DMA_START;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+ }
+
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static int k2_sata_hardreset(struct ata_link *link,
+ unsigned int *class, unsigned long deadline)
+{
+ u8 dmactl;
+ void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+ dmactl = readb(mmio + ATA_DMA_CMD);
+
+ /* Clear the start bit */
+ if (dmactl & ATA_DMA_START) {
+ dmactl &= ~ATA_DMA_START;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+ }
+
+ return sata_sff_hardreset(link, class, deadline);
+}
static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
static struct ata_port_operations k2_sata_ops = {
.inherits = &ata_bmdma_port_ops,
+ .softreset = k2_sata_softreset,
+ .hardreset = k2_sata_hardreset,
.sff_tf_load = k2_sata_tf_load,
.sff_tf_read = k2_sata_tf_read,
.sff_check_status = k2_stat_check_status,
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/idr.h>
+#include <linux/acpi.h>
#include "base.h"
#include "power/power.h"
goto err_alloc;
pdev->dev.parent = pdevinfo->parent;
+ ACPI_HANDLE_SET(&pdev->dev, pdevinfo->acpi_node.handle);
if (pdevinfo->dma_mask) {
/*
ret = platform_device_add(pdev);
if (ret) {
err:
+ ACPI_HANDLE_SET(&pdev->dev, NULL);
kfree(pdev->dev.dma_mask);
err_alloc:
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
+ int ret;
- return drv->probe(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_attach(_dev, true);
+
+ ret = drv->probe(dev);
+ if (ret && ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
+
+ return ret;
}
static int platform_drv_probe_fail(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
+ int ret;
+
+ ret = drv->remove(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
- return drv->remove(dev);
+ return ret;
}
static void platform_drv_shutdown(struct device *_dev)
struct platform_device *dev = to_platform_device(_dev);
drv->shutdown(dev);
+ if (ACPI_HANDLE(_dev))
+ acpi_dev_pm_detach(_dev, true);
}
/**
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then try ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
/* Then try to match against the id table */
if (pdrv->id_table)
return platform_match_id(pdrv->id_table, pdev) != NULL;
if (ce->status < PCE_STATUS_ERROR) {
if (ce->status == PCE_STATUS_ENABLED)
- clk_disable(ce->clk);
+ clk_disable_unprepare(ce->clk);
if (ce->status >= PCE_STATUS_ACQUIRED)
clk_put(ce->clk);
clk = clk_get(dev, con_id);
if (!IS_ERR(clk)) {
- clk_enable(clk);
+ clk_prepare_enable(clk);
clk_put(clk);
dev_info(dev, "Runtime PM disabled, clock forced on.\n");
}
clk = clk_get(dev, con_id);
if (!IS_ERR(clk)) {
- clk_disable(clk);
+ clk_disable_unprepare(clk);
clk_put(clk);
dev_info(dev, "Runtime PM disabled, clock forced off.\n");
}
return -EBUSY;
not_suspended = 0;
- list_for_each_entry(pdd, &genpd->dev_list, list_node)
+ list_for_each_entry(pdd, &genpd->dev_list, list_node) {
+ enum pm_qos_flags_status stat;
+
+ stat = dev_pm_qos_flags(pdd->dev,
+ PM_QOS_FLAG_NO_POWER_OFF
+ | PM_QOS_FLAG_REMOTE_WAKEUP);
+ if (stat > PM_QOS_FLAGS_NONE)
+ return -EBUSY;
+
if (pdd->dev->driver && (!pm_runtime_suspended(pdd->dev)
|| pdd->dev->power.irq_safe))
not_suspended++;
+ }
if (not_suspended > genpd->in_progress)
return -EBUSY;
#include <linux/rcupdate.h>
#include <linux/opp.h>
#include <linux/of.h>
+#include <linux/export.h>
/*
* Internal data structure organization with the OPP layer library is as
unsigned long u_volt;
struct device_opp *dev_opp;
+ struct rcu_head head;
};
/**
return v;
}
+EXPORT_SYMBOL(opp_get_voltage);
/**
* opp_get_freq() - Gets the frequency corresponding to an available opp
return f;
}
+EXPORT_SYMBOL(opp_get_freq);
/**
* opp_get_opp_count() - Get number of opps available in the opp list
return count;
}
+EXPORT_SYMBOL(opp_get_opp_count);
/**
* opp_find_freq_exact() - search for an exact frequency
*
* Searches for exact match in the opp list and returns pointer to the matching
* opp if found, else returns ERR_PTR in case of error and should be handled
- * using IS_ERR.
+ * using IS_ERR. Error return values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Note: available is a modifier for the search. if available=true, then the
* match is for exact matching frequency and is available in the stored OPP
bool available)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp)) {
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_exact);
/**
* opp_find_freq_ceil() - Search for an rounded ceil freq
* for a device.
*
* Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. The reason for the same is that the opp pointer which is
struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return opp;
+ return ERR_CAST(dev_opp);
list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
if (temp_opp->available && temp_opp->rate >= *freq) {
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_ceil);
/**
* opp_find_freq_floor() - Search for a rounded floor freq
* for a device.
*
* Returns matching *opp and refreshes *freq accordingly, else returns
- * ERR_PTR in case of error and should be handled using IS_ERR.
+ * ERR_PTR in case of error and should be handled using IS_ERR. Error return
+ * values can be:
+ * EINVAL: for bad pointer
+ * ERANGE: no match found for search
+ * ENODEV: if device not found in list of registered devices
*
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. The reason for the same is that the opp pointer which is
struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq)
{
struct device_opp *dev_opp;
- struct opp *temp_opp, *opp = ERR_PTR(-ENODEV);
+ struct opp *temp_opp, *opp = ERR_PTR(-ERANGE);
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp))
- return opp;
+ return ERR_CAST(dev_opp);
list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
if (temp_opp->available) {
return opp;
}
+EXPORT_SYMBOL(opp_find_freq_floor);
/**
* opp_add() - Add an OPP table from a table definitions
list_replace_rcu(&opp->node, &new_opp->node);
mutex_unlock(&dev_opp_list_lock);
- synchronize_rcu();
+ kfree_rcu(opp, head);
/* Notify the change of the OPP availability */
if (availability_req)
srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE,
new_opp);
- /* clean up old opp */
- new_opp = opp;
- goto out;
+ return 0;
unlock:
mutex_unlock(&dev_opp_list_lock);
-out:
kfree(new_opp);
return r;
}
{
return opp_set_availability(dev, freq, true);
}
+EXPORT_SYMBOL(opp_enable);
/**
* opp_disable() - Disable a specific OPP
{
return opp_set_availability(dev, freq, false);
}
+EXPORT_SYMBOL(opp_disable);
#ifdef CONFIG_CPU_FREQ
/**
extern void rpm_sysfs_remove(struct device *dev);
extern int wakeup_sysfs_add(struct device *dev);
extern void wakeup_sysfs_remove(struct device *dev);
-extern int pm_qos_sysfs_add(struct device *dev);
-extern void pm_qos_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add_latency(struct device *dev);
+extern void pm_qos_sysfs_remove_latency(struct device *dev);
+extern int pm_qos_sysfs_add_flags(struct device *dev);
+extern void pm_qos_sysfs_remove_flags(struct device *dev);
#else /* CONFIG_PM */
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/export.h>
+#include <linux/pm_runtime.h>
#include "power.h"
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
+/**
+ * __dev_pm_qos_flags - Check PM QoS flags for a given device.
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ *
+ * This routine must be called with dev->power.lock held.
+ */
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+ struct dev_pm_qos *qos = dev->power.qos;
+ struct pm_qos_flags *pqf;
+ s32 val;
+
+ if (!qos)
+ return PM_QOS_FLAGS_UNDEFINED;
+
+ pqf = &qos->flags;
+ if (list_empty(&pqf->list))
+ return PM_QOS_FLAGS_UNDEFINED;
+
+ val = pqf->effective_flags & mask;
+ if (val)
+ return (val == mask) ? PM_QOS_FLAGS_ALL : PM_QOS_FLAGS_SOME;
+
+ return PM_QOS_FLAGS_NONE;
+}
+
+/**
+ * dev_pm_qos_flags - Check PM QoS flags for a given device (locked).
+ * @dev: Device to check the PM QoS flags for.
+ * @mask: Flags to check against.
+ */
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask)
+{
+ unsigned long irqflags;
+ enum pm_qos_flags_status ret;
+
+ spin_lock_irqsave(&dev->power.lock, irqflags);
+ ret = __dev_pm_qos_flags(dev, mask);
+ spin_unlock_irqrestore(&dev->power.lock, irqflags);
+
+ return ret;
+}
+
/**
* __dev_pm_qos_read_value - Get PM QoS constraint for a given device.
* @dev: Device to get the PM QoS constraint value for.
*/
s32 __dev_pm_qos_read_value(struct device *dev)
{
- struct pm_qos_constraints *c = dev->power.constraints;
-
- return c ? pm_qos_read_value(c) : 0;
+ return dev->power.qos ? pm_qos_read_value(&dev->power.qos->latency) : 0;
}
/**
return ret;
}
-/*
- * apply_constraint
- * @req: constraint request to apply
- * @action: action to perform add/update/remove, of type enum pm_qos_req_action
- * @value: defines the qos request
+/**
+ * apply_constraint - Add/modify/remove device PM QoS request.
+ * @req: Constraint request to apply
+ * @action: Action to perform (add/update/remove).
+ * @value: Value to assign to the QoS request.
*
* Internal function to update the constraints list using the PM QoS core
* code and if needed call the per-device and the global notification
* callbacks
*/
static int apply_constraint(struct dev_pm_qos_request *req,
- enum pm_qos_req_action action, int value)
+ enum pm_qos_req_action action, s32 value)
{
- int ret, curr_value;
-
- ret = pm_qos_update_target(req->dev->power.constraints,
- &req->node, action, value);
+ struct dev_pm_qos *qos = req->dev->power.qos;
+ int ret;
- if (ret) {
- /* Call the global callbacks if needed */
- curr_value = pm_qos_read_value(req->dev->power.constraints);
- blocking_notifier_call_chain(&dev_pm_notifiers,
- (unsigned long)curr_value,
- req);
+ switch(req->type) {
+ case DEV_PM_QOS_LATENCY:
+ ret = pm_qos_update_target(&qos->latency, &req->data.pnode,
+ action, value);
+ if (ret) {
+ value = pm_qos_read_value(&qos->latency);
+ blocking_notifier_call_chain(&dev_pm_notifiers,
+ (unsigned long)value,
+ req);
+ }
+ break;
+ case DEV_PM_QOS_FLAGS:
+ ret = pm_qos_update_flags(&qos->flags, &req->data.flr,
+ action, value);
+ break;
+ default:
+ ret = -EINVAL;
}
return ret;
*/
static int dev_pm_qos_constraints_allocate(struct device *dev)
{
+ struct dev_pm_qos *qos;
struct pm_qos_constraints *c;
struct blocking_notifier_head *n;
- c = kzalloc(sizeof(*c), GFP_KERNEL);
- if (!c)
+ qos = kzalloc(sizeof(*qos), GFP_KERNEL);
+ if (!qos)
return -ENOMEM;
n = kzalloc(sizeof(*n), GFP_KERNEL);
if (!n) {
- kfree(c);
+ kfree(qos);
return -ENOMEM;
}
BLOCKING_INIT_NOTIFIER_HEAD(n);
+ c = &qos->latency;
plist_head_init(&c->list);
c->target_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
c->default_value = PM_QOS_DEV_LAT_DEFAULT_VALUE;
c->type = PM_QOS_MIN;
c->notifiers = n;
+ INIT_LIST_HEAD(&qos->flags.list);
+
spin_lock_irq(&dev->power.lock);
- dev->power.constraints = c;
+ dev->power.qos = qos;
spin_unlock_irq(&dev->power.lock);
return 0;
void dev_pm_qos_constraints_init(struct device *dev)
{
mutex_lock(&dev_pm_qos_mtx);
- dev->power.constraints = NULL;
+ dev->power.qos = NULL;
dev->power.power_state = PMSG_ON;
mutex_unlock(&dev_pm_qos_mtx);
}
*/
void dev_pm_qos_constraints_destroy(struct device *dev)
{
+ struct dev_pm_qos *qos;
struct dev_pm_qos_request *req, *tmp;
struct pm_qos_constraints *c;
+ struct pm_qos_flags *f;
/*
- * If the device's PM QoS resume latency limit has been exposed to user
- * space, it has to be hidden at this point.
+ * If the device's PM QoS resume latency limit or PM QoS flags have been
+ * exposed to user space, they have to be hidden at this point.
*/
dev_pm_qos_hide_latency_limit(dev);
+ dev_pm_qos_hide_flags(dev);
mutex_lock(&dev_pm_qos_mtx);
dev->power.power_state = PMSG_INVALID;
- c = dev->power.constraints;
- if (!c)
+ qos = dev->power.qos;
+ if (!qos)
goto out;
- /* Flush the constraints list for the device */
- plist_for_each_entry_safe(req, tmp, &c->list, node) {
+ /* Flush the constraints lists for the device. */
+ c = &qos->latency;
+ plist_for_each_entry_safe(req, tmp, &c->list, data.pnode) {
/*
* Update constraints list and call the notification
* callbacks if needed
apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
memset(req, 0, sizeof(*req));
}
+ f = &qos->flags;
+ list_for_each_entry_safe(req, tmp, &f->list, data.flr.node) {
+ apply_constraint(req, PM_QOS_REMOVE_REQ, PM_QOS_DEFAULT_VALUE);
+ memset(req, 0, sizeof(*req));
+ }
spin_lock_irq(&dev->power.lock);
- dev->power.constraints = NULL;
+ dev->power.qos = NULL;
spin_unlock_irq(&dev->power.lock);
kfree(c->notifiers);
- kfree(c);
+ kfree(qos);
out:
mutex_unlock(&dev_pm_qos_mtx);
* dev_pm_qos_add_request - inserts new qos request into the list
* @dev: target device for the constraint
* @req: pointer to a preallocated handle
+ * @type: type of the request
* @value: defines the qos request
*
* This function inserts a new entry in the device constraints list of
* -EINVAL in case of wrong parameters, -ENOMEM if there's not enough memory
* to allocate for data structures, -ENODEV if the device has just been removed
* from the system.
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
- s32 value)
+ enum dev_pm_qos_req_type type, s32 value)
{
int ret = 0;
mutex_lock(&dev_pm_qos_mtx);
- if (!dev->power.constraints) {
+ if (!dev->power.qos) {
if (dev->power.power_state.event == PM_EVENT_INVALID) {
/* The device has been removed from the system. */
req->dev = NULL;
}
}
- if (!ret)
+ if (!ret) {
+ req->type = type;
ret = apply_constraint(req, PM_QOS_ADD_REQ, value);
+ }
out:
mutex_unlock(&dev_pm_qos_mtx);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
+/**
+ * __dev_pm_qos_update_request - Modify an existing device PM QoS request.
+ * @req : PM QoS request to modify.
+ * @new_value: New value to request.
+ */
+static int __dev_pm_qos_update_request(struct dev_pm_qos_request *req,
+ s32 new_value)
+{
+ s32 curr_value;
+ int ret = 0;
+
+ if (!req->dev->power.qos)
+ return -ENODEV;
+
+ switch(req->type) {
+ case DEV_PM_QOS_LATENCY:
+ curr_value = req->data.pnode.prio;
+ break;
+ case DEV_PM_QOS_FLAGS:
+ curr_value = req->data.flr.flags;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (curr_value != new_value)
+ ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
+
+ return ret;
+}
+
/**
* dev_pm_qos_update_request - modifies an existing qos request
* @req : handle to list element holding a dev_pm_qos request to use
* 0 if the aggregated constraint value has not changed,
* -EINVAL in case of wrong parameters, -ENODEV if the device has been
* removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
-int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
- s32 new_value)
+int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
{
- int ret = 0;
+ int ret;
if (!req) /*guard against callers passing in null */
return -EINVAL;
return -EINVAL;
mutex_lock(&dev_pm_qos_mtx);
-
- if (req->dev->power.constraints) {
- if (new_value != req->node.prio)
- ret = apply_constraint(req, PM_QOS_UPDATE_REQ,
- new_value);
- } else {
- /* Return if the device has been removed */
- ret = -ENODEV;
- }
-
+ ret = __dev_pm_qos_update_request(req, new_value);
mutex_unlock(&dev_pm_qos_mtx);
+
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
* 0 if the aggregated constraint value has not changed,
* -EINVAL in case of wrong parameters, -ENODEV if the device has been
* removed from the system
+ *
+ * Callers should ensure that the target device is not RPM_SUSPENDED before
+ * using this function for requests of type DEV_PM_QOS_FLAGS.
*/
int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
{
mutex_lock(&dev_pm_qos_mtx);
- if (req->dev->power.constraints) {
+ if (req->dev->power.qos) {
ret = apply_constraint(req, PM_QOS_REMOVE_REQ,
PM_QOS_DEFAULT_VALUE);
memset(req, 0, sizeof(*req));
mutex_lock(&dev_pm_qos_mtx);
- if (!dev->power.constraints)
+ if (!dev->power.qos)
ret = dev->power.power_state.event != PM_EVENT_INVALID ?
dev_pm_qos_constraints_allocate(dev) : -ENODEV;
if (!ret)
ret = blocking_notifier_chain_register(
- dev->power.constraints->notifiers, notifier);
+ dev->power.qos->latency.notifiers, notifier);
mutex_unlock(&dev_pm_qos_mtx);
return ret;
mutex_lock(&dev_pm_qos_mtx);
/* Silently return if the constraints object is not present. */
- if (dev->power.constraints)
+ if (dev->power.qos)
retval = blocking_notifier_chain_unregister(
- dev->power.constraints->notifiers,
+ dev->power.qos->latency.notifiers,
notifier);
mutex_unlock(&dev_pm_qos_mtx);
ancestor = ancestor->parent;
if (ancestor)
- error = dev_pm_qos_add_request(ancestor, req, value);
+ error = dev_pm_qos_add_request(ancestor, req,
+ DEV_PM_QOS_LATENCY, value);
- if (error)
+ if (error < 0)
req->dev = NULL;
return error;
EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
#ifdef CONFIG_PM_RUNTIME
-static void __dev_pm_qos_drop_user_request(struct device *dev)
+static void __dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
{
- dev_pm_qos_remove_request(dev->power.pq_req);
- dev->power.pq_req = NULL;
+ switch(type) {
+ case DEV_PM_QOS_LATENCY:
+ dev_pm_qos_remove_request(dev->power.qos->latency_req);
+ dev->power.qos->latency_req = NULL;
+ break;
+ case DEV_PM_QOS_FLAGS:
+ dev_pm_qos_remove_request(dev->power.qos->flags_req);
+ dev->power.qos->flags_req = NULL;
+ break;
+ }
}
/**
if (!device_is_registered(dev) || value < 0)
return -EINVAL;
- if (dev->power.pq_req)
+ if (dev->power.qos && dev->power.qos->latency_req)
return -EEXIST;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
- ret = dev_pm_qos_add_request(dev, req, value);
+ ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_LATENCY, value);
if (ret < 0)
return ret;
- dev->power.pq_req = req;
- ret = pm_qos_sysfs_add(dev);
+ dev->power.qos->latency_req = req;
+ ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
return ret;
}
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (dev->power.pq_req) {
- pm_qos_sysfs_remove(dev);
- __dev_pm_qos_drop_user_request(dev);
+ if (dev->power.qos && dev->power.qos->latency_req) {
+ pm_qos_sysfs_remove_latency(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
}
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
+
+/**
+ * dev_pm_qos_expose_flags - Expose PM QoS flags of a device to user space.
+ * @dev: Device whose PM QoS flags are to be exposed to user space.
+ * @val: Initial values of the flags.
+ */
+int dev_pm_qos_expose_flags(struct device *dev, s32 val)
+{
+ struct dev_pm_qos_request *req;
+ int ret;
+
+ if (!device_is_registered(dev))
+ return -EINVAL;
+
+ if (dev->power.qos && dev->power.qos->flags_req)
+ return -EEXIST;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ pm_runtime_get_sync(dev);
+ ret = dev_pm_qos_add_request(dev, req, DEV_PM_QOS_FLAGS, val);
+ if (ret < 0)
+ goto fail;
+
+ dev->power.qos->flags_req = req;
+ ret = pm_qos_sysfs_add_flags(dev);
+ if (ret)
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+
+fail:
+ pm_runtime_put(dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_expose_flags);
+
+/**
+ * dev_pm_qos_hide_flags - Hide PM QoS flags of a device from user space.
+ * @dev: Device whose PM QoS flags are to be hidden from user space.
+ */
+void dev_pm_qos_hide_flags(struct device *dev)
+{
+ if (dev->power.qos && dev->power.qos->flags_req) {
+ pm_qos_sysfs_remove_flags(dev);
+ pm_runtime_get_sync(dev);
+ __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ pm_runtime_put(dev);
+ }
+}
+EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
+
+/**
+ * dev_pm_qos_update_flags - Update PM QoS flags request owned by user space.
+ * @dev: Device to update the PM QoS flags request for.
+ * @mask: Flags to set/clear.
+ * @set: Whether to set or clear the flags (true means set).
+ */
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set)
+{
+ s32 value;
+ int ret;
+
+ if (!dev->power.qos || !dev->power.qos->flags_req)
+ return -EINVAL;
+
+ pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_mtx);
+
+ value = dev_pm_qos_requested_flags(dev);
+ if (set)
+ value |= mask;
+ else
+ value &= ~mask;
+
+ ret = __dev_pm_qos_update_request(dev->power.qos->flags_req, value);
+
+ mutex_unlock(&dev_pm_qos_mtx);
+ pm_runtime_put(dev);
+
+ return ret;
+}
#endif /* CONFIG_PM_RUNTIME */
static ssize_t pm_qos_latency_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n", dev->power.pq_req->node.prio);
+ return sprintf(buf, "%d\n", dev_pm_qos_requested_latency(dev));
}
static ssize_t pm_qos_latency_store(struct device *dev,
if (value < 0)
return -EINVAL;
- ret = dev_pm_qos_update_request(dev->power.pq_req, value);
+ ret = dev_pm_qos_update_request(dev->power.qos->latency_req, value);
return ret < 0 ? ret : n;
}
static DEVICE_ATTR(pm_qos_resume_latency_us, 0644,
pm_qos_latency_show, pm_qos_latency_store);
+
+static ssize_t pm_qos_no_power_off_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+ & PM_QOS_FLAG_NO_POWER_OFF));
+}
+
+static ssize_t pm_qos_no_power_off_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ int ret;
+
+ if (kstrtoint(buf, 0, &ret))
+ return -EINVAL;
+
+ if (ret != 0 && ret != 1)
+ return -EINVAL;
+
+ ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret);
+ return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_no_power_off, 0644,
+ pm_qos_no_power_off_show, pm_qos_no_power_off_store);
+
+static ssize_t pm_qos_remote_wakeup_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
+ & PM_QOS_FLAG_REMOTE_WAKEUP));
+}
+
+static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ int ret;
+
+ if (kstrtoint(buf, 0, &ret))
+ return -EINVAL;
+
+ if (ret != 0 && ret != 1)
+ return -EINVAL;
+
+ ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret);
+ return ret < 0 ? ret : n;
+}
+
+static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
+ pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
.attrs = runtime_attrs,
};
-static struct attribute *pm_qos_attrs[] = {
+static struct attribute *pm_qos_latency_attrs[] = {
#ifdef CONFIG_PM_RUNTIME
&dev_attr_pm_qos_resume_latency_us.attr,
#endif /* CONFIG_PM_RUNTIME */
NULL,
};
-static struct attribute_group pm_qos_attr_group = {
+static struct attribute_group pm_qos_latency_attr_group = {
.name = power_group_name,
- .attrs = pm_qos_attrs,
+ .attrs = pm_qos_latency_attrs,
+};
+
+static struct attribute *pm_qos_flags_attrs[] = {
+#ifdef CONFIG_PM_RUNTIME
+ &dev_attr_pm_qos_no_power_off.attr,
+ &dev_attr_pm_qos_remote_wakeup.attr,
+#endif /* CONFIG_PM_RUNTIME */
+ NULL,
+};
+static struct attribute_group pm_qos_flags_attr_group = {
+ .name = power_group_name,
+ .attrs = pm_qos_flags_attrs,
};
int dpm_sysfs_add(struct device *dev)
sysfs_unmerge_group(&dev->kobj, &pm_wakeup_attr_group);
}
-int pm_qos_sysfs_add(struct device *dev)
+int pm_qos_sysfs_add_latency(struct device *dev)
+{
+ return sysfs_merge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+void pm_qos_sysfs_remove_latency(struct device *dev)
+{
+ sysfs_unmerge_group(&dev->kobj, &pm_qos_latency_attr_group);
+}
+
+int pm_qos_sysfs_add_flags(struct device *dev)
{
- return sysfs_merge_group(&dev->kobj, &pm_qos_attr_group);
+ return sysfs_merge_group(&dev->kobj, &pm_qos_flags_attr_group);
}
-void pm_qos_sysfs_remove(struct device *dev)
+void pm_qos_sysfs_remove_flags(struct device *dev)
{
- sysfs_unmerge_group(&dev->kobj, &pm_qos_attr_group);
+ sysfs_unmerge_group(&dev->kobj, &pm_qos_flags_attr_group);
}
void rpm_sysfs_remove(struct device *dev)
/* cf. http://lkml.org/lkml/2006/10/31/28 */
if (!fastfail)
- q->request_fn(q);
+ __blk_run_queue(q);
}
static void
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
+ destroy_workqueue(floppy_wq);
for (drive = 0; drive < N_DRIVE; drive++) {
if (!disks[drive])
break;
}
put_disk(disks[drive]);
}
- destroy_workqueue(floppy_wq);
return err;
}
unregister_blkdev(FLOPPY_MAJOR, "fd");
platform_driver_unregister(&floppy_driver);
+ destroy_workqueue(floppy_wq);
+
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
cancel_delayed_work_sync(&fd_timeout);
cancel_delayed_work_sync(&fd_timer);
- destroy_workqueue(floppy_wq);
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
struct mtip_cmd *command;
int tag, cmdto_cnt = 0;
unsigned int bit, group;
- unsigned int num_command_slots = port->dd->slot_groups * 32;
+ unsigned int num_command_slots;
unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
if (unlikely(!port))
}
/* clear the tag accumulator */
memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+ num_command_slots = port->dd->slot_groups * 32;
for (tag = 0; tag < num_command_slots; tag++) {
/*
fis.device);
/* check for erase mode support during secure erase.*/
- if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
- && (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+ if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
+ (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
erasemode = 1;
}
* return value
* None
*/
-static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector,
int nsect, int nents, int tag, void *callback,
void *data, int dir)
{
struct mtip_port *port = dd->port;
struct mtip_cmd *command = &port->commands[tag];
int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ u64 start = sector;
/* Map the scatter list for DMA access */
nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
fis->opts = 1 << 7;
fis->command =
(dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE);
- *((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
- *((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
+ fis->lba_low = start & 0xFF;
+ fis->lba_mid = (start >> 8) & 0xFF;
+ fis->lba_hi = (start >> 16) & 0xFF;
+ fis->lba_low_ex = (start >> 24) & 0xFF;
+ fis->lba_mid_ex = (start >> 32) & 0xFF;
+ fis->lba_hi_ex = (start >> 40) & 0xFF;
fis->device = 1 << 6;
fis->features = nsect & 0xFF;
fis->features_ex = (nsect >> 8) & 0xFF;
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
/* check for erase mode support during secure erase */
-#define MTIP_SEC_ERASE_MODE 0x3
+#define MTIP_SEC_ERASE_MODE 0x2
/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES 2
MTIP_DDF_REBUILD_FAILED_BIT = 8,
};
-__packed struct smart_attr{
+struct smart_attr {
u8 attr_id;
u16 flags;
u8 cur;
u8 worst;
u32 data;
u8 res[3];
-};
+} __packed;
/* Register Frame Information Structure (FIS), host to device. */
struct host_to_dev_fis {
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
+ { USB_DEVICE(0x0489, 0xE027) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/omap_ocp2scp.h>
+
+/**
+ * _count_resources - count for the number of resources
+ * @res: struct resource *
+ *
+ * Count and return the number of resources populated for the device that is
+ * connected to ocp2scp.
+ */
+static unsigned _count_resources(struct resource *res)
+{
+ int cnt = 0;
+
+ while (res->start != res->end) {
+ cnt++;
+ res++;
+ }
+
+ return cnt;
+}
static int ocp2scp_remove_devices(struct device *dev, void *c)
{
static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
{
- int ret;
- struct device_node *np = pdev->dev.of_node;
+ int ret;
+ unsigned res_cnt, i;
+ struct device_node *np = pdev->dev.of_node;
+ struct platform_device *pdev_child;
+ struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_ocp2scp_dev *dev;
if (np) {
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret) {
- dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+ dev_err(&pdev->dev,
+ "failed to add resources for ocp2scp child\n");
goto err0;
}
+ } else if (pdata) {
+ for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++,
+ dev++) {
+ res_cnt = _count_resources(dev->res);
+
+ pdev_child = platform_device_alloc(dev->drv_name,
+ PLATFORM_DEVID_AUTO);
+ if (!pdev_child) {
+ dev_err(&pdev->dev,
+ "failed to allocate mem for ocp2scp child\n");
+ goto err0;
+ }
+
+ ret = platform_device_add_resources(pdev_child,
+ dev->res, res_cnt);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to add resources for ocp2scp child\n");
+ goto err1;
+ }
+
+ pdev_child->dev.parent = &pdev->dev;
+
+ ret = platform_device_add(pdev_child);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register ocp2scp child device\n");
+ goto err1;
+ }
+ }
+ } else {
+ dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n");
+ return -EINVAL;
}
+
pm_runtime_enable(&pdev->dev);
return 0;
+err1:
+ platform_device_put(pdev_child);
+
err0:
device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
CLK_IS_ROOT|CLK_IGNORE_UNUSED,
32768);
clk_register_clkdev(clk, "clk32k", NULL);
- clk_register_clkdev(clk, NULL, "rtc-pl031");
+ clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
/* PRCMU clocks */
fw_version = prcmu_get_fw_version();
clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp0");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+
clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp1");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
BIT(5), 0);
clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
BIT(7), 0);
clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
BIT(8), 0);
+ clk_register_clkdev(clk, "apb_pclk", "slimbus0");
clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
BIT(9), 0);
clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
BIT(10), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
BIT(11), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp3");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
BIT(1), 0);
clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp2");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi1");
-
clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi3");
clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
BIT(4), 0);
clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp0");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
+
clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp1");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
- U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
- /* FIXME: Redefinition of BIT(3). */
+ U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "slimbus0");
+
clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp3");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
/* Periph2 */
clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.3");
clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp2");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
/* Periph3 */
clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp0");
+
clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp1");
+
clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.0");
clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
help
This adds the CPUFreq driver for Samsung EXYNOS5250
SoC.
+
+config ARM_SPEAR_CPUFREQ
+ bool "SPEAr CPUFreq support"
+ depends on PLAT_SPEAR
+ default y
+ help
+ This adds the CPUFreq driver support for SPEAr SOCs.
obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
-obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
-obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
+obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o cpufreq_governor.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
##################################################################################
# PowerPC platform drivers
.attr = cpu0_cpufreq_attr,
};
-static int __devinit cpu0_cpufreq_driver_init(void)
+static int cpu0_cpufreq_driver_init(void)
{
struct device_node *np;
int ret;
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
pure_initcall(init_cpufreq_transition_notifier_list);
static int off __read_mostly;
-int cpufreq_disabled(void)
+static int cpufreq_disabled(void)
{
return off;
}
static ssize_t store_##file_name \
(struct cpufreq_policy *policy, const char *buf, size_t count) \
{ \
- unsigned int ret = -EINVAL; \
+ unsigned int ret; \
struct cpufreq_policy new_policy; \
\
ret = cpufreq_get_policy(&new_policy, policy->cpu); \
else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
return sprintf(buf, "performance\n");
else if (policy->governor)
- return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
+ return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n",
policy->governor->name);
return -EINVAL;
}
static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
const char *buf, size_t count)
{
- unsigned int ret = -EINVAL;
+ unsigned int ret;
char str_governor[16];
struct cpufreq_policy new_policy;
*/
static ssize_t show_scaling_driver(struct cpufreq_policy *policy, char *buf)
{
- return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", cpufreq_driver->name);
+ return scnprintf(buf, CPUFREQ_NAME_PLEN, "%s\n", cpufreq_driver->name);
}
/**
if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
- (CPUFREQ_NAME_LEN + 2)))
goto out;
- i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
+ i += scnprintf(&buf[i], CPUFREQ_NAME_PLEN, "%s ", t->name);
}
out:
i += sprintf(&buf[i], "\n");
}
/**
- * show_scaling_driver - show the current cpufreq HW/BIOS limitation
+ * show_bios_limit - show the current cpufreq HW/BIOS limitation
*/
static ssize_t show_bios_limit(struct cpufreq_policy *policy, char *buf)
{
unsigned int relation)
{
int retval = -EINVAL;
+ unsigned int old_target_freq = target_freq;
if (cpufreq_disabled())
return -ENODEV;
- pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
- target_freq, relation);
+ /* Make sure that target_freq is within supported range */
+ if (target_freq > policy->max)
+ target_freq = policy->max;
+ if (target_freq < policy->min)
+ target_freq = policy->min;
+
+ pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
+ policy->cpu, target_freq, relation, old_target_freq);
+
+ if (target_freq == policy->cur)
+ return 0;
+
if (cpu_online(policy->cpu) && cpufreq_driver->target)
retval = cpufreq_driver->target(policy, target_freq, relation);
{
int ret = 0;
+ if (!(cpu_online(cpu) && cpufreq_driver->getavg))
+ return 0;
+
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
- if (cpu_online(cpu) && cpufreq_driver->getavg)
- ret = cpufreq_driver->getavg(policy, cpu);
+ ret = cpufreq_driver->getavg(policy, cpu);
cpufreq_cpu_put(policy);
return ret;
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/hrtimer.h>
-#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
+/* Conservative governor macors */
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_FREQUENCY_DOWN_THRESHOLD (20)
-
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (100)
#define DEF_SAMPLING_DOWN_FACTOR (1)
#define MAX_SAMPLING_DOWN_FACTOR (10)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-
-struct cpu_dbs_info_s {
- cputime64_t prev_cpu_idle;
- cputime64_t prev_cpu_wall;
- cputime64_t prev_cpu_nice;
- struct cpufreq_policy *cur_policy;
- struct delayed_work work;
- unsigned int down_skip;
- unsigned int requested_freq;
- int cpu;
- unsigned int enable:1;
- /*
- * percpu mutex that serializes governor limit change with
- * do_dbs_timer invocation. We do not want do_dbs_timer to run
- * when user is changing the governor or limits.
- */
- struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, cs_cpu_dbs_info);
-static unsigned int dbs_enable; /* number of CPUs using this policy */
+static struct dbs_data cs_dbs_data;
+static DEFINE_PER_CPU(struct cs_cpu_dbs_info_s, cs_cpu_dbs_info);
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
- unsigned int sampling_rate;
- unsigned int sampling_down_factor;
- unsigned int up_threshold;
- unsigned int down_threshold;
- unsigned int ignore_nice;
- unsigned int freq_step;
-} dbs_tuners_ins = {
+static struct cs_dbs_tuners cs_tuners = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
.freq_step = 5,
};
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate *
+ * sampling_down_factor, we check, if current idle time is more than 80%, then
+ * we try to decrease frequency
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of maximum frequency
+ */
+static void cs_check_cpu(int cpu, unsigned int load)
{
- u64 idle_time;
- u64 cur_wall_time;
- u64 busy_time;
+ struct cs_cpu_dbs_info_s *dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
+ struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+ unsigned int freq_target;
+
+ /*
+ * break out if we 'cannot' reduce the speed as the user might
+ * want freq_step to be zero
+ */
+ if (cs_tuners.freq_step == 0)
+ return;
- cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+ /* Check for frequency increase */
+ if (load > cs_tuners.up_threshold) {
+ dbs_info->down_skip = 0;
- busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+ /* if we are already at full speed then break out early */
+ if (dbs_info->requested_freq == policy->max)
+ return;
- idle_time = cur_wall_time - busy_time;
- if (wall)
- *wall = jiffies_to_usecs(cur_wall_time);
+ freq_target = (cs_tuners.freq_step * policy->max) / 100;
- return jiffies_to_usecs(idle_time);
+ /* max freq cannot be less than 100. But who knows.... */
+ if (unlikely(freq_target == 0))
+ freq_target = 5;
+
+ dbs_info->requested_freq += freq_target;
+ if (dbs_info->requested_freq > policy->max)
+ dbs_info->requested_freq = policy->max;
+
+ __cpufreq_driver_target(policy, dbs_info->requested_freq,
+ CPUFREQ_RELATION_H);
+ return;
+ }
+
+ /*
+ * The optimal frequency is the frequency that is the lowest that can
+ * support the current CPU usage without triggering the up policy. To be
+ * safe, we focus 10 points under the threshold.
+ */
+ if (load < (cs_tuners.down_threshold - 10)) {
+ freq_target = (cs_tuners.freq_step * policy->max) / 100;
+
+ dbs_info->requested_freq -= freq_target;
+ if (dbs_info->requested_freq < policy->min)
+ dbs_info->requested_freq = policy->min;
+
+ /*
+ * if we cannot reduce the frequency anymore, break out early
+ */
+ if (policy->cur == policy->min)
+ return;
+
+ __cpufreq_driver_target(policy, dbs_info->requested_freq,
+ CPUFREQ_RELATION_H);
+ return;
+ }
}
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+static void cs_dbs_timer(struct work_struct *work)
{
- u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+ struct cs_cpu_dbs_info_s *dbs_info = container_of(work,
+ struct cs_cpu_dbs_info_s, cdbs.work.work);
+ unsigned int cpu = dbs_info->cdbs.cpu;
+ int delay = delay_for_sampling_rate(cs_tuners.sampling_rate);
- if (idle_time == -1ULL)
- return get_cpu_idle_time_jiffy(cpu, wall);
- else
- idle_time += get_cpu_iowait_time_us(cpu, wall);
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
- return idle_time;
+ dbs_check_cpu(&cs_dbs_data, cpu);
+
+ schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
}
-/* keep track of frequency transitions */
-static int
-dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
- void *data)
+static int dbs_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data)
{
struct cpufreq_freqs *freq = data;
- struct cpu_dbs_info_s *this_dbs_info = &per_cpu(cs_cpu_dbs_info,
- freq->cpu);
-
+ struct cs_cpu_dbs_info_s *dbs_info =
+ &per_cpu(cs_cpu_dbs_info, freq->cpu);
struct cpufreq_policy *policy;
- if (!this_dbs_info->enable)
+ if (!dbs_info->enable)
return 0;
- policy = this_dbs_info->cur_policy;
+ policy = dbs_info->cdbs.cur_policy;
/*
- * we only care if our internally tracked freq moves outside
- * the 'valid' ranges of freqency available to us otherwise
- * we do not change it
+ * we only care if our internally tracked freq moves outside the 'valid'
+ * ranges of freqency available to us otherwise we do not change it
*/
- if (this_dbs_info->requested_freq > policy->max
- || this_dbs_info->requested_freq < policy->min)
- this_dbs_info->requested_freq = freq->new;
+ if (dbs_info->requested_freq > policy->max
+ || dbs_info->requested_freq < policy->min)
+ dbs_info->requested_freq = freq->new;
return 0;
}
-static struct notifier_block dbs_cpufreq_notifier_block = {
- .notifier_call = dbs_cpufreq_notifier
-};
-
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_min(struct kobject *kobj,
struct attribute *attr, char *buf)
{
- return sprintf(buf, "%u\n", min_sampling_rate);
+ return sprintf(buf, "%u\n", cs_dbs_data.min_sampling_rate);
}
-define_one_global_ro(sampling_rate_min);
-
-/* cpufreq_conservative Governor Tunables */
-#define show_one(file_name, object) \
-static ssize_t show_##file_name \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
-{ \
- return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
-}
-show_one(sampling_rate, sampling_rate);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(up_threshold, up_threshold);
-show_one(down_threshold, down_threshold);
-show_one(ignore_nice_load, ignore_nice);
-show_one(freq_step, freq_step);
-
static ssize_t store_sampling_down_factor(struct kobject *a,
struct attribute *b,
const char *buf, size_t count)
if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- dbs_tuners_ins.sampling_down_factor = input;
+ cs_tuners.sampling_down_factor = input;
return count;
}
if (ret != 1)
return -EINVAL;
- dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+ cs_tuners.sampling_rate = max(input, cs_dbs_data.min_sampling_rate);
return count;
}
int ret;
ret = sscanf(buf, "%u", &input);
- if (ret != 1 || input > 100 ||
- input <= dbs_tuners_ins.down_threshold)
+ if (ret != 1 || input > 100 || input <= cs_tuners.down_threshold)
return -EINVAL;
- dbs_tuners_ins.up_threshold = input;
+ cs_tuners.up_threshold = input;
return count;
}
/* cannot be lower than 11 otherwise freq will not fall */
if (ret != 1 || input < 11 || input > 100 ||
- input >= dbs_tuners_ins.up_threshold)
+ input >= cs_tuners.up_threshold)
return -EINVAL;
- dbs_tuners_ins.down_threshold = input;
+ cs_tuners.down_threshold = input;
return count;
}
static ssize_t store_ignore_nice_load(struct kobject *a, struct attribute *b,
const char *buf, size_t count)
{
- unsigned int input;
+ unsigned int input, j;
int ret;
- unsigned int j;
-
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
if (input > 1)
input = 1;
- if (input == dbs_tuners_ins.ignore_nice) /* nothing to do */
+ if (input == cs_tuners.ignore_nice) /* nothing to do */
return count;
- dbs_tuners_ins.ignore_nice = input;
+ cs_tuners.ignore_nice = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
+ struct cs_cpu_dbs_info_s *dbs_info;
dbs_info = &per_cpu(cs_cpu_dbs_info, j);
- dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+ &dbs_info->cdbs.prev_cpu_wall);
+ if (cs_tuners.ignore_nice)
+ dbs_info->cdbs.prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
return count;
}
if (input > 100)
input = 100;
- /* no need to test here if freq_step is zero as the user might actually
- * want this, they would be crazy though :) */
- dbs_tuners_ins.freq_step = input;
+ /*
+ * no need to test here if freq_step is zero as the user might actually
+ * want this, they would be crazy though :)
+ */
+ cs_tuners.freq_step = input;
return count;
}
+show_one(cs, sampling_rate, sampling_rate);
+show_one(cs, sampling_down_factor, sampling_down_factor);
+show_one(cs, up_threshold, up_threshold);
+show_one(cs, down_threshold, down_threshold);
+show_one(cs, ignore_nice_load, ignore_nice);
+show_one(cs, freq_step, freq_step);
+
define_one_global_rw(sampling_rate);
define_one_global_rw(sampling_down_factor);
define_one_global_rw(up_threshold);
define_one_global_rw(down_threshold);
define_one_global_rw(ignore_nice_load);
define_one_global_rw(freq_step);
+define_one_global_ro(sampling_rate_min);
static struct attribute *dbs_attributes[] = {
&sampling_rate_min.attr,
NULL
};
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group cs_attr_group = {
.attrs = dbs_attributes,
.name = "conservative",
};
/************************** sysfs end ************************/
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
- unsigned int load = 0;
- unsigned int max_load = 0;
- unsigned int freq_target;
-
- struct cpufreq_policy *policy;
- unsigned int j;
-
- policy = this_dbs_info->cur_policy;
-
- /*
- * Every sampling_rate, we check, if current idle time is less
- * than 20% (default), then we try to increase frequency
- * Every sampling_rate*sampling_down_factor, we check, if current
- * idle time is more than 80%, then we try to decrease frequency
- *
- * Any frequency increase takes it to the maximum frequency.
- * Frequency reduction happens at minimum steps of
- * 5% (default) of maximum frequency
- */
-
- /* Get Absolute Load */
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- cputime64_t cur_wall_time, cur_idle_time;
- unsigned int idle_time, wall_time;
-
- j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
-
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
-
- wall_time = (unsigned int)
- (cur_wall_time - j_dbs_info->prev_cpu_wall);
- j_dbs_info->prev_cpu_wall = cur_wall_time;
-
- idle_time = (unsigned int)
- (cur_idle_time - j_dbs_info->prev_cpu_idle);
- j_dbs_info->prev_cpu_idle = cur_idle_time;
-
- if (dbs_tuners_ins.ignore_nice) {
- u64 cur_nice;
- unsigned long cur_nice_jiffies;
-
- cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
- j_dbs_info->prev_cpu_nice;
- /*
- * Assumption: nice time between sampling periods will
- * be less than 2^32 jiffies for 32 bit sys
- */
- cur_nice_jiffies = (unsigned long)
- cputime64_to_jiffies64(cur_nice);
-
- j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- idle_time += jiffies_to_usecs(cur_nice_jiffies);
- }
+define_get_cpu_dbs_routines(cs_cpu_dbs_info);
- if (unlikely(!wall_time || wall_time < idle_time))
- continue;
-
- load = 100 * (wall_time - idle_time) / wall_time;
-
- if (load > max_load)
- max_load = load;
- }
-
- /*
- * break out if we 'cannot' reduce the speed as the user might
- * want freq_step to be zero
- */
- if (dbs_tuners_ins.freq_step == 0)
- return;
-
- /* Check for frequency increase */
- if (max_load > dbs_tuners_ins.up_threshold) {
- this_dbs_info->down_skip = 0;
-
- /* if we are already at full speed then break out early */
- if (this_dbs_info->requested_freq == policy->max)
- return;
-
- freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
- /* max freq cannot be less than 100. But who knows.... */
- if (unlikely(freq_target == 0))
- freq_target = 5;
-
- this_dbs_info->requested_freq += freq_target;
- if (this_dbs_info->requested_freq > policy->max)
- this_dbs_info->requested_freq = policy->max;
-
- __cpufreq_driver_target(policy, this_dbs_info->requested_freq,
- CPUFREQ_RELATION_H);
- return;
- }
-
- /*
- * The optimal frequency is the frequency that is the lowest that
- * can support the current CPU usage without triggering the up
- * policy. To be safe, we focus 10 points under the threshold.
- */
- if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
- freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
-
- this_dbs_info->requested_freq -= freq_target;
- if (this_dbs_info->requested_freq < policy->min)
- this_dbs_info->requested_freq = policy->min;
-
- /*
- * if we cannot reduce the frequency anymore, break out early
- */
- if (policy->cur == policy->min)
- return;
-
- __cpufreq_driver_target(policy, this_dbs_info->requested_freq,
- CPUFREQ_RELATION_H);
- return;
- }
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
- struct cpu_dbs_info_s *dbs_info =
- container_of(work, struct cpu_dbs_info_s, work.work);
- unsigned int cpu = dbs_info->cpu;
-
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
- delay -= jiffies % delay;
-
- mutex_lock(&dbs_info->timer_mutex);
-
- dbs_check_cpu(dbs_info);
-
- schedule_delayed_work_on(cpu, &dbs_info->work, delay);
- mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
- delay -= jiffies % delay;
+static struct notifier_block cs_cpufreq_notifier_block = {
+ .notifier_call = dbs_cpufreq_notifier,
+};
- dbs_info->enable = 1;
- INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
+static struct cs_ops cs_ops = {
+ .notifier_block = &cs_cpufreq_notifier_block,
+};
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
-{
- dbs_info->enable = 0;
- cancel_delayed_work_sync(&dbs_info->work);
-}
+static struct dbs_data cs_dbs_data = {
+ .governor = GOV_CONSERVATIVE,
+ .attr_group = &cs_attr_group,
+ .tuners = &cs_tuners,
+ .get_cpu_cdbs = get_cpu_cdbs,
+ .get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+ .gov_dbs_timer = cs_dbs_timer,
+ .gov_check_cpu = cs_check_cpu,
+ .gov_ops = &cs_ops,
+};
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
+static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy,
unsigned int event)
{
- unsigned int cpu = policy->cpu;
- struct cpu_dbs_info_s *this_dbs_info;
- unsigned int j;
- int rc;
-
- this_dbs_info = &per_cpu(cs_cpu_dbs_info, cpu);
-
- switch (event) {
- case CPUFREQ_GOV_START:
- if ((!cpu_online(cpu)) || (!policy->cur))
- return -EINVAL;
-
- mutex_lock(&dbs_mutex);
-
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- j_dbs_info = &per_cpu(cs_cpu_dbs_info, j);
- j_dbs_info->cur_policy = policy;
-
- j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &j_dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- j_dbs_info->prev_cpu_nice =
- kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- }
- this_dbs_info->cpu = cpu;
- this_dbs_info->down_skip = 0;
- this_dbs_info->requested_freq = policy->cur;
-
- mutex_init(&this_dbs_info->timer_mutex);
- dbs_enable++;
- /*
- * Start the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 1) {
- unsigned int latency;
- /* policy latency is in nS. Convert it to uS first */
- latency = policy->cpuinfo.transition_latency / 1000;
- if (latency == 0)
- latency = 1;
-
- rc = sysfs_create_group(cpufreq_global_kobject,
- &dbs_attr_group);
- if (rc) {
- mutex_unlock(&dbs_mutex);
- return rc;
- }
-
- /*
- * conservative does not implement micro like ondemand
- * governor, thus we are bound to jiffes/HZ
- */
- min_sampling_rate =
- MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
- /* Bring kernel and HW constraints together */
- min_sampling_rate = max(min_sampling_rate,
- MIN_LATENCY_MULTIPLIER * latency);
- dbs_tuners_ins.sampling_rate =
- max(min_sampling_rate,
- latency * LATENCY_MULTIPLIER);
-
- cpufreq_register_notifier(
- &dbs_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
- }
- mutex_unlock(&dbs_mutex);
-
- dbs_timer_init(this_dbs_info);
-
- break;
-
- case CPUFREQ_GOV_STOP:
- dbs_timer_exit(this_dbs_info);
-
- mutex_lock(&dbs_mutex);
- dbs_enable--;
- mutex_destroy(&this_dbs_info->timer_mutex);
-
- /*
- * Stop the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 0)
- cpufreq_unregister_notifier(
- &dbs_cpufreq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
-
- mutex_unlock(&dbs_mutex);
- if (!dbs_enable)
- sysfs_remove_group(cpufreq_global_kobject,
- &dbs_attr_group);
-
- break;
-
- case CPUFREQ_GOV_LIMITS:
- mutex_lock(&this_dbs_info->timer_mutex);
- if (policy->max < this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(
- this_dbs_info->cur_policy,
- policy->max, CPUFREQ_RELATION_H);
- else if (policy->min > this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(
- this_dbs_info->cur_policy,
- policy->min, CPUFREQ_RELATION_L);
- dbs_check_cpu(this_dbs_info);
- mutex_unlock(&this_dbs_info->timer_mutex);
-
- break;
- }
- return 0;
+ return cpufreq_governor_dbs(&cs_dbs_data, policy, event);
}
#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
#endif
struct cpufreq_governor cpufreq_gov_conservative = {
.name = "conservative",
- .governor = cpufreq_governor_dbs,
+ .governor = cs_cpufreq_governor_dbs,
.max_transition_latency = TRANSITION_LATENCY_LIMIT,
.owner = THIS_MODULE,
};
static int __init cpufreq_gov_dbs_init(void)
{
+ mutex_init(&cs_dbs_data.mutex);
return cpufreq_register_governor(&cpufreq_gov_conservative);
}
cpufreq_unregister_governor(&cpufreq_gov_conservative);
}
-
MODULE_AUTHOR("Alexander Clouter <alex@digriz.org.uk>");
MODULE_DESCRIPTION("'cpufreq_conservative' - A dynamic cpufreq governor for "
"Low Latency Frequency Transition capable processors "
--- /dev/null
+/*
+ * drivers/cpufreq/cpufreq_governor.c
+ *
+ * CPUFREQ governors common code
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * (C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <asm/cputime.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/kernel_stat.h>
+#include <linux/mutex.h>
+#include <linux/tick.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "cpufreq_governor.h"
+
+static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
+{
+ u64 idle_time;
+ u64 cur_wall_time;
+ u64 busy_time;
+
+ cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
+
+ busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
+ busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
+
+ idle_time = cur_wall_time - busy_time;
+ if (wall)
+ *wall = cputime_to_usecs(cur_wall_time);
+
+ return cputime_to_usecs(idle_time);
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall)
+{
+ u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
+
+ if (idle_time == -1ULL)
+ return get_cpu_idle_time_jiffy(cpu, wall);
+ else
+ idle_time += get_cpu_iowait_time_us(cpu, wall);
+
+ return idle_time;
+}
+EXPORT_SYMBOL_GPL(get_cpu_idle_time);
+
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu)
+{
+ struct cpu_dbs_common_info *cdbs = dbs_data->get_cpu_cdbs(cpu);
+ struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+ struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+ struct cpufreq_policy *policy;
+ unsigned int max_load = 0;
+ unsigned int ignore_nice;
+ unsigned int j;
+
+ if (dbs_data->governor == GOV_ONDEMAND)
+ ignore_nice = od_tuners->ignore_nice;
+ else
+ ignore_nice = cs_tuners->ignore_nice;
+
+ policy = cdbs->cur_policy;
+
+ /* Get Absolute Load (in terms of freq for ondemand gov) */
+ for_each_cpu(j, policy->cpus) {
+ struct cpu_dbs_common_info *j_cdbs;
+ u64 cur_wall_time, cur_idle_time, cur_iowait_time;
+ unsigned int idle_time, wall_time, iowait_time;
+ unsigned int load;
+
+ j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+ cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
+
+ wall_time = (unsigned int)
+ (cur_wall_time - j_cdbs->prev_cpu_wall);
+ j_cdbs->prev_cpu_wall = cur_wall_time;
+
+ idle_time = (unsigned int)
+ (cur_idle_time - j_cdbs->prev_cpu_idle);
+ j_cdbs->prev_cpu_idle = cur_idle_time;
+
+ if (ignore_nice) {
+ u64 cur_nice;
+ unsigned long cur_nice_jiffies;
+
+ cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
+ cdbs->prev_cpu_nice;
+ /*
+ * Assumption: nice time between sampling periods will
+ * be less than 2^32 jiffies for 32 bit sys
+ */
+ cur_nice_jiffies = (unsigned long)
+ cputime64_to_jiffies64(cur_nice);
+
+ cdbs->prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ idle_time += jiffies_to_usecs(cur_nice_jiffies);
+ }
+
+ if (dbs_data->governor == GOV_ONDEMAND) {
+ struct od_cpu_dbs_info_s *od_j_dbs_info =
+ dbs_data->get_cpu_dbs_info_s(cpu);
+
+ cur_iowait_time = get_cpu_iowait_time_us(j,
+ &cur_wall_time);
+ if (cur_iowait_time == -1ULL)
+ cur_iowait_time = 0;
+
+ iowait_time = (unsigned int) (cur_iowait_time -
+ od_j_dbs_info->prev_cpu_iowait);
+ od_j_dbs_info->prev_cpu_iowait = cur_iowait_time;
+
+ /*
+ * For the purpose of ondemand, waiting for disk IO is
+ * an indication that you're performance critical, and
+ * not that the system is actually idle. So subtract the
+ * iowait time from the cpu idle time.
+ */
+ if (od_tuners->io_is_busy && idle_time >= iowait_time)
+ idle_time -= iowait_time;
+ }
+
+ if (unlikely(!wall_time || wall_time < idle_time))
+ continue;
+
+ load = 100 * (wall_time - idle_time) / wall_time;
+
+ if (dbs_data->governor == GOV_ONDEMAND) {
+ int freq_avg = __cpufreq_driver_getavg(policy, j);
+ if (freq_avg <= 0)
+ freq_avg = policy->cur;
+
+ load *= freq_avg;
+ }
+
+ if (load > max_load)
+ max_load = load;
+ }
+
+ dbs_data->gov_check_cpu(cpu, max_load);
+}
+EXPORT_SYMBOL_GPL(dbs_check_cpu);
+
+static inline void dbs_timer_init(struct dbs_data *dbs_data,
+ struct cpu_dbs_common_info *cdbs, unsigned int sampling_rate)
+{
+ int delay = delay_for_sampling_rate(sampling_rate);
+
+ INIT_DEFERRABLE_WORK(&cdbs->work, dbs_data->gov_dbs_timer);
+ schedule_delayed_work_on(cdbs->cpu, &cdbs->work, delay);
+}
+
+static inline void dbs_timer_exit(struct cpu_dbs_common_info *cdbs)
+{
+ cancel_delayed_work_sync(&cdbs->work);
+}
+
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+ struct cpufreq_policy *policy, unsigned int event)
+{
+ struct od_cpu_dbs_info_s *od_dbs_info = NULL;
+ struct cs_cpu_dbs_info_s *cs_dbs_info = NULL;
+ struct od_dbs_tuners *od_tuners = dbs_data->tuners;
+ struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
+ struct cpu_dbs_common_info *cpu_cdbs;
+ unsigned int *sampling_rate, latency, ignore_nice, j, cpu = policy->cpu;
+ int rc;
+
+ cpu_cdbs = dbs_data->get_cpu_cdbs(cpu);
+
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ cs_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+ sampling_rate = &cs_tuners->sampling_rate;
+ ignore_nice = cs_tuners->ignore_nice;
+ } else {
+ od_dbs_info = dbs_data->get_cpu_dbs_info_s(cpu);
+ sampling_rate = &od_tuners->sampling_rate;
+ ignore_nice = od_tuners->ignore_nice;
+ }
+
+ switch (event) {
+ case CPUFREQ_GOV_START:
+ if ((!cpu_online(cpu)) || (!policy->cur))
+ return -EINVAL;
+
+ mutex_lock(&dbs_data->mutex);
+
+ dbs_data->enable++;
+ cpu_cdbs->cpu = cpu;
+ for_each_cpu(j, policy->cpus) {
+ struct cpu_dbs_common_info *j_cdbs;
+ j_cdbs = dbs_data->get_cpu_cdbs(j);
+
+ j_cdbs->cur_policy = policy;
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j,
+ &j_cdbs->prev_cpu_wall);
+ if (ignore_nice)
+ j_cdbs->prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ }
+
+ /*
+ * Start the timerschedule work, when this governor is used for
+ * first time
+ */
+ if (dbs_data->enable != 1)
+ goto second_time;
+
+ rc = sysfs_create_group(cpufreq_global_kobject,
+ dbs_data->attr_group);
+ if (rc) {
+ mutex_unlock(&dbs_data->mutex);
+ return rc;
+ }
+
+ /* policy latency is in nS. Convert it to uS first */
+ latency = policy->cpuinfo.transition_latency / 1000;
+ if (latency == 0)
+ latency = 1;
+
+ /*
+ * conservative does not implement micro like ondemand
+ * governor, thus we are bound to jiffes/HZ
+ */
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ struct cs_ops *ops = dbs_data->gov_ops;
+
+ cpufreq_register_notifier(ops->notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ dbs_data->min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+ jiffies_to_usecs(10);
+ } else {
+ struct od_ops *ops = dbs_data->gov_ops;
+
+ od_tuners->io_is_busy = ops->io_busy();
+ }
+
+ /* Bring kernel and HW constraints together */
+ dbs_data->min_sampling_rate = max(dbs_data->min_sampling_rate,
+ MIN_LATENCY_MULTIPLIER * latency);
+ *sampling_rate = max(dbs_data->min_sampling_rate, latency *
+ LATENCY_MULTIPLIER);
+
+second_time:
+ if (dbs_data->governor == GOV_CONSERVATIVE) {
+ cs_dbs_info->down_skip = 0;
+ cs_dbs_info->enable = 1;
+ cs_dbs_info->requested_freq = policy->cur;
+ } else {
+ struct od_ops *ops = dbs_data->gov_ops;
+ od_dbs_info->rate_mult = 1;
+ od_dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ ops->powersave_bias_init_cpu(cpu);
+ }
+ mutex_unlock(&dbs_data->mutex);
+
+ mutex_init(&cpu_cdbs->timer_mutex);
+ dbs_timer_init(dbs_data, cpu_cdbs, *sampling_rate);
+ break;
+
+ case CPUFREQ_GOV_STOP:
+ if (dbs_data->governor == GOV_CONSERVATIVE)
+ cs_dbs_info->enable = 0;
+
+ dbs_timer_exit(cpu_cdbs);
+
+ mutex_lock(&dbs_data->mutex);
+ mutex_destroy(&cpu_cdbs->timer_mutex);
+ dbs_data->enable--;
+ if (!dbs_data->enable) {
+ struct cs_ops *ops = dbs_data->gov_ops;
+
+ sysfs_remove_group(cpufreq_global_kobject,
+ dbs_data->attr_group);
+ if (dbs_data->governor == GOV_CONSERVATIVE)
+ cpufreq_unregister_notifier(ops->notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ }
+ mutex_unlock(&dbs_data->mutex);
+
+ break;
+
+ case CPUFREQ_GOV_LIMITS:
+ mutex_lock(&cpu_cdbs->timer_mutex);
+ if (policy->max < cpu_cdbs->cur_policy->cur)
+ __cpufreq_driver_target(cpu_cdbs->cur_policy,
+ policy->max, CPUFREQ_RELATION_H);
+ else if (policy->min > cpu_cdbs->cur_policy->cur)
+ __cpufreq_driver_target(cpu_cdbs->cur_policy,
+ policy->min, CPUFREQ_RELATION_L);
+ dbs_check_cpu(dbs_data, cpu);
+ mutex_unlock(&cpu_cdbs->timer_mutex);
+ break;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpufreq_governor_dbs);
--- /dev/null
+/*
+ * drivers/cpufreq/cpufreq_governor.h
+ *
+ * Header file for CPUFreq governors common code
+ *
+ * Copyright (C) 2001 Russell King
+ * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
+ * (C) 2003 Jun Nakajima <jun.nakajima@intel.com>
+ * (C) 2009 Alexander Clouter <alex@digriz.org.uk>
+ * (c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _CPUFREQ_GOVERNER_H
+#define _CPUFREQ_GOVERNER_H
+
+#include <linux/cpufreq.h>
+#include <linux/kobject.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * governor will work on any processor with transition latency <= 10mS, using
+ * appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work. All times here are in uS.
+ */
+#define MIN_SAMPLING_RATE_RATIO (2)
+#define LATENCY_MULTIPLIER (1000)
+#define MIN_LATENCY_MULTIPLIER (100)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
+
+/* Ondemand Sampling types */
+enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
+
+/* Macro creating sysfs show routines */
+#define show_one(_gov, file_name, object) \
+static ssize_t show_##file_name \
+(struct kobject *kobj, struct attribute *attr, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", _gov##_tuners.object); \
+}
+
+#define define_get_cpu_dbs_routines(_dbs_info) \
+static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu) \
+{ \
+ return &per_cpu(_dbs_info, cpu).cdbs; \
+} \
+ \
+static void *get_cpu_dbs_info_s(int cpu) \
+{ \
+ return &per_cpu(_dbs_info, cpu); \
+}
+
+/*
+ * Abbreviations:
+ * dbs: used as a shortform for demand based switching It helps to keep variable
+ * names smaller, simpler
+ * cdbs: common dbs
+ * on_*: On-demand governor
+ * cs_*: Conservative governor
+ */
+
+/* Per cpu structures */
+struct cpu_dbs_common_info {
+ int cpu;
+ u64 prev_cpu_idle;
+ u64 prev_cpu_wall;
+ u64 prev_cpu_nice;
+ struct cpufreq_policy *cur_policy;
+ struct delayed_work work;
+ /*
+ * percpu mutex that serializes governor limit change with gov_dbs_timer
+ * invocation. We do not want gov_dbs_timer to run when user is changing
+ * the governor or limits.
+ */
+ struct mutex timer_mutex;
+};
+
+struct od_cpu_dbs_info_s {
+ struct cpu_dbs_common_info cdbs;
+ u64 prev_cpu_iowait;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned int freq_lo;
+ unsigned int freq_lo_jiffies;
+ unsigned int freq_hi_jiffies;
+ unsigned int rate_mult;
+ unsigned int sample_type:1;
+};
+
+struct cs_cpu_dbs_info_s {
+ struct cpu_dbs_common_info cdbs;
+ unsigned int down_skip;
+ unsigned int requested_freq;
+ unsigned int enable:1;
+};
+
+/* Governers sysfs tunables */
+struct od_dbs_tuners {
+ unsigned int ignore_nice;
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_differential;
+ unsigned int powersave_bias;
+ unsigned int io_is_busy;
+};
+
+struct cs_dbs_tuners {
+ unsigned int ignore_nice;
+ unsigned int sampling_rate;
+ unsigned int sampling_down_factor;
+ unsigned int up_threshold;
+ unsigned int down_threshold;
+ unsigned int freq_step;
+};
+
+/* Per Governer data */
+struct dbs_data {
+ /* Common across governors */
+ #define GOV_ONDEMAND 0
+ #define GOV_CONSERVATIVE 1
+ int governor;
+ unsigned int min_sampling_rate;
+ unsigned int enable; /* number of CPUs using this policy */
+ struct attribute_group *attr_group;
+ void *tuners;
+
+ /* dbs_mutex protects dbs_enable in governor start/stop */
+ struct mutex mutex;
+
+ struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu);
+ void *(*get_cpu_dbs_info_s)(int cpu);
+ void (*gov_dbs_timer)(struct work_struct *work);
+ void (*gov_check_cpu)(int cpu, unsigned int load);
+
+ /* Governor specific ops, see below */
+ void *gov_ops;
+};
+
+/* Governor specific ops, will be passed to dbs_data->gov_ops */
+struct od_ops {
+ int (*io_busy)(void);
+ void (*powersave_bias_init_cpu)(int cpu);
+ unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
+ unsigned int freq_next, unsigned int relation);
+ void (*freq_increase)(struct cpufreq_policy *p, unsigned int freq);
+};
+
+struct cs_ops {
+ struct notifier_block *notifier_block;
+};
+
+static inline int delay_for_sampling_rate(unsigned int sampling_rate)
+{
+ int delay = usecs_to_jiffies(sampling_rate);
+
+ /* We want all CPUs to do sampling nearly on same jiffy */
+ if (num_online_cpus() > 1)
+ delay -= jiffies % delay;
+
+ return delay;
+}
+
+u64 get_cpu_idle_time(unsigned int cpu, u64 *wall);
+void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
+int cpufreq_governor_dbs(struct dbs_data *dbs_data,
+ struct cpufreq_policy *policy, unsigned int event);
+#endif /* _CPUFREQ_GOVERNER_H */
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/kernel_stat.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/hrtimer.h>
+#include <linux/percpu-defs.h>
+#include <linux/sysfs.h>
#include <linux/tick.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
+#include <linux/types.h>
-/*
- * dbs is used in this file as a shortform for demandbased switching
- * It helps to keep variable names smaller, simpler
- */
+#include "cpufreq_governor.h"
+/* On-demand governor macors */
#define DEF_FREQUENCY_DOWN_DIFFERENTIAL (10)
#define DEF_FREQUENCY_UP_THRESHOLD (80)
#define DEF_SAMPLING_DOWN_FACTOR (1)
#define MIN_FREQUENCY_UP_THRESHOLD (11)
#define MAX_FREQUENCY_UP_THRESHOLD (100)
-/*
- * The polling frequency of this governor depends on the capability of
- * the processor. Default polling frequency is 1000 times the transition
- * latency of the processor. The governor will work on any processor with
- * transition latency <= 10mS, using appropriate sampling
- * rate.
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work.
- * All times here are in uS.
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-
-static unsigned int min_sampling_rate;
-
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (100)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-
-static void do_dbs_timer(struct work_struct *work);
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
- unsigned int event);
+static struct dbs_data od_dbs_data;
+static DEFINE_PER_CPU(struct od_cpu_dbs_info_s, od_cpu_dbs_info);
#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
+static struct cpufreq_governor cpufreq_gov_ondemand;
#endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
- .name = "ondemand",
- .governor = cpufreq_governor_dbs,
- .max_transition_latency = TRANSITION_LATENCY_LIMIT,
- .owner = THIS_MODULE,
-};
-/* Sampling types */
-enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
-
-struct cpu_dbs_info_s {
- cputime64_t prev_cpu_idle;
- cputime64_t prev_cpu_iowait;
- cputime64_t prev_cpu_wall;
- cputime64_t prev_cpu_nice;
- struct cpufreq_policy *cur_policy;
- struct delayed_work work;
- struct cpufreq_frequency_table *freq_table;
- unsigned int freq_lo;
- unsigned int freq_lo_jiffies;
- unsigned int freq_hi_jiffies;
- unsigned int rate_mult;
- int cpu;
- unsigned int sample_type:1;
- /*
- * percpu mutex that serializes governor limit change with
- * do_dbs_timer invocation. We do not want do_dbs_timer to run
- * when user is changing the governor or limits.
- */
- struct mutex timer_mutex;
-};
-static DEFINE_PER_CPU(struct cpu_dbs_info_s, od_cpu_dbs_info);
-
-static unsigned int dbs_enable; /* number of CPUs using this policy */
-
-/*
- * dbs_mutex protects dbs_enable in governor start/stop.
- */
-static DEFINE_MUTEX(dbs_mutex);
-
-static struct dbs_tuners {
- unsigned int sampling_rate;
- unsigned int up_threshold;
- unsigned int down_differential;
- unsigned int ignore_nice;
- unsigned int sampling_down_factor;
- unsigned int powersave_bias;
- unsigned int io_is_busy;
-} dbs_tuners_ins = {
+static struct od_dbs_tuners od_tuners = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
.down_differential = DEF_FREQUENCY_DOWN_DIFFERENTIAL,
.powersave_bias = 0,
};
-static inline u64 get_cpu_idle_time_jiffy(unsigned int cpu, u64 *wall)
-{
- u64 idle_time;
- u64 cur_wall_time;
- u64 busy_time;
-
- cur_wall_time = jiffies64_to_cputime64(get_jiffies_64());
-
- busy_time = kcpustat_cpu(cpu).cpustat[CPUTIME_USER];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SYSTEM];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_IRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_SOFTIRQ];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_STEAL];
- busy_time += kcpustat_cpu(cpu).cpustat[CPUTIME_NICE];
-
- idle_time = cur_wall_time - busy_time;
- if (wall)
- *wall = jiffies_to_usecs(cur_wall_time);
-
- return jiffies_to_usecs(idle_time);
-}
-
-static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
+static void ondemand_powersave_bias_init_cpu(int cpu)
{
- u64 idle_time = get_cpu_idle_time_us(cpu, NULL);
-
- if (idle_time == -1ULL)
- return get_cpu_idle_time_jiffy(cpu, wall);
- else
- idle_time += get_cpu_iowait_time_us(cpu, wall);
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
- return idle_time;
+ dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
+ dbs_info->freq_lo = 0;
}
-static inline cputime64_t get_cpu_iowait_time(unsigned int cpu, cputime64_t *wall)
+/*
+ * Not all CPUs want IO time to be accounted as busy; this depends on how
+ * efficient idling at a higher frequency/voltage is.
+ * Pavel Machek says this is not so for various generations of AMD and old
+ * Intel systems.
+ * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Because of this, whitelist specific known (series) of CPUs by default, and
+ * leave all others up to the user.
+ */
+static int should_io_be_busy(void)
{
- u64 iowait_time = get_cpu_iowait_time_us(cpu, wall);
-
- if (iowait_time == -1ULL)
- return 0;
-
- return iowait_time;
+#if defined(CONFIG_X86)
+ /*
+ * For Intel, Core 2 (model 15) andl later have an efficient idle.
+ */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6 &&
+ boot_cpu_data.x86_model >= 15)
+ return 1;
+#endif
+ return 0;
}
/*
* freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
*/
static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
- unsigned int freq_next,
- unsigned int relation)
+ unsigned int freq_next, unsigned int relation)
{
unsigned int freq_req, freq_reduc, freq_avg;
unsigned int freq_hi, freq_lo;
unsigned int index = 0;
unsigned int jiffies_total, jiffies_hi, jiffies_lo;
- struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
policy->cpu);
if (!dbs_info->freq_table) {
cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
relation, &index);
freq_req = dbs_info->freq_table[index].frequency;
- freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
+ freq_reduc = freq_req * od_tuners.powersave_bias / 1000;
freq_avg = freq_req - freq_reduc;
/* Find freq bounds for freq_avg in freq_table */
dbs_info->freq_lo_jiffies = 0;
return freq_lo;
}
- jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
+ jiffies_total = usecs_to_jiffies(od_tuners.sampling_rate);
jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
jiffies_hi += ((freq_hi - freq_lo) / 2);
jiffies_hi /= (freq_hi - freq_lo);
return freq_hi;
}
-static void ondemand_powersave_bias_init_cpu(int cpu)
-{
- struct cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
- dbs_info->freq_table = cpufreq_frequency_get_table(cpu);
- dbs_info->freq_lo = 0;
-}
-
static void ondemand_powersave_bias_init(void)
{
int i;
}
}
-/************************** sysfs interface ************************/
+static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
+{
+ if (od_tuners.powersave_bias)
+ freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
+ else if (p->cur == p->max)
+ return;
-static ssize_t show_sampling_rate_min(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ __cpufreq_driver_target(p, freq, od_tuners.powersave_bias ?
+ CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
+}
+
+/*
+ * Every sampling_rate, we check, if current idle time is less than 20%
+ * (default), then we try to increase frequency Every sampling_rate, we look for
+ * a the lowest frequency which can sustain the load while keeping idle time
+ * over 30%. If such a frequency exist, we try to decrease to this frequency.
+ *
+ * Any frequency increase takes it to the maximum frequency. Frequency reduction
+ * happens at minimum steps of 5% (default) of current frequency
+ */
+static void od_check_cpu(int cpu, unsigned int load_freq)
{
- return sprintf(buf, "%u\n", min_sampling_rate);
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
+ struct cpufreq_policy *policy = dbs_info->cdbs.cur_policy;
+
+ dbs_info->freq_lo = 0;
+
+ /* Check for frequency increase */
+ if (load_freq > od_tuners.up_threshold * policy->cur) {
+ /* If switching to max speed, apply sampling_down_factor */
+ if (policy->cur < policy->max)
+ dbs_info->rate_mult =
+ od_tuners.sampling_down_factor;
+ dbs_freq_increase(policy, policy->max);
+ return;
+ }
+
+ /* Check for frequency decrease */
+ /* if we cannot reduce the frequency anymore, break out early */
+ if (policy->cur == policy->min)
+ return;
+
+ /*
+ * The optimal frequency is the frequency that is the lowest that can
+ * support the current CPU usage without triggering the up policy. To be
+ * safe, we focus 10 points under the threshold.
+ */
+ if (load_freq < (od_tuners.up_threshold - od_tuners.down_differential) *
+ policy->cur) {
+ unsigned int freq_next;
+ freq_next = load_freq / (od_tuners.up_threshold -
+ od_tuners.down_differential);
+
+ /* No longer fully busy, reset rate_mult */
+ dbs_info->rate_mult = 1;
+
+ if (freq_next < policy->min)
+ freq_next = policy->min;
+
+ if (!od_tuners.powersave_bias) {
+ __cpufreq_driver_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ } else {
+ int freq = powersave_bias_target(policy, freq_next,
+ CPUFREQ_RELATION_L);
+ __cpufreq_driver_target(policy, freq,
+ CPUFREQ_RELATION_L);
+ }
+ }
}
-define_one_global_ro(sampling_rate_min);
+static void od_dbs_timer(struct work_struct *work)
+{
+ struct od_cpu_dbs_info_s *dbs_info =
+ container_of(work, struct od_cpu_dbs_info_s, cdbs.work.work);
+ unsigned int cpu = dbs_info->cdbs.cpu;
+ int delay, sample_type = dbs_info->sample_type;
+
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
+
+ /* Common NORMAL_SAMPLE setup */
+ dbs_info->sample_type = OD_NORMAL_SAMPLE;
+ if (sample_type == OD_SUB_SAMPLE) {
+ delay = dbs_info->freq_lo_jiffies;
+ __cpufreq_driver_target(dbs_info->cdbs.cur_policy,
+ dbs_info->freq_lo, CPUFREQ_RELATION_H);
+ } else {
+ dbs_check_cpu(&od_dbs_data, cpu);
+ if (dbs_info->freq_lo) {
+ /* Setup timer for SUB_SAMPLE */
+ dbs_info->sample_type = OD_SUB_SAMPLE;
+ delay = dbs_info->freq_hi_jiffies;
+ } else {
+ delay = delay_for_sampling_rate(od_tuners.sampling_rate
+ * dbs_info->rate_mult);
+ }
+ }
+
+ schedule_delayed_work_on(cpu, &dbs_info->cdbs.work, delay);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
+}
+
+/************************** sysfs interface ************************/
-/* cpufreq_ondemand Governor Tunables */
-#define show_one(file_name, object) \
-static ssize_t show_##file_name \
-(struct kobject *kobj, struct attribute *attr, char *buf) \
-{ \
- return sprintf(buf, "%u\n", dbs_tuners_ins.object); \
+static ssize_t show_sampling_rate_min(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ return sprintf(buf, "%u\n", od_dbs_data.min_sampling_rate);
}
-show_one(sampling_rate, sampling_rate);
-show_one(io_is_busy, io_is_busy);
-show_one(up_threshold, up_threshold);
-show_one(sampling_down_factor, sampling_down_factor);
-show_one(ignore_nice_load, ignore_nice);
-show_one(powersave_bias, powersave_bias);
/**
* update_sampling_rate - update sampling rate effective immediately if needed.
* @new_rate: new sampling rate
*
* If new rate is smaller than the old, simply updaing
- * dbs_tuners_int.sampling_rate might not be appropriate. For example,
- * if the original sampling_rate was 1 second and the requested new sampling
- * rate is 10 ms because the user needs immediate reaction from ondemand
- * governor, but not sure if higher frequency will be required or not,
- * then, the governor may change the sampling rate too late; up to 1 second
- * later. Thus, if we are reducing the sampling rate, we need to make the
- * new value effective immediately.
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
+ * original sampling_rate was 1 second and the requested new sampling rate is 10
+ * ms because the user needs immediate reaction from ondemand governor, but not
+ * sure if higher frequency will be required or not, then, the governor may
+ * change the sampling rate too late; up to 1 second later. Thus, if we are
+ * reducing the sampling rate, we need to make the new value effective
+ * immediately.
*/
static void update_sampling_rate(unsigned int new_rate)
{
int cpu;
- dbs_tuners_ins.sampling_rate = new_rate
- = max(new_rate, min_sampling_rate);
+ od_tuners.sampling_rate = new_rate = max(new_rate,
+ od_dbs_data.min_sampling_rate);
for_each_online_cpu(cpu) {
struct cpufreq_policy *policy;
- struct cpu_dbs_info_s *dbs_info;
+ struct od_cpu_dbs_info_s *dbs_info;
unsigned long next_sampling, appointed_at;
policy = cpufreq_cpu_get(cpu);
if (!policy)
continue;
+ if (policy->governor != &cpufreq_gov_ondemand) {
+ cpufreq_cpu_put(policy);
+ continue;
+ }
dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
cpufreq_cpu_put(policy);
- mutex_lock(&dbs_info->timer_mutex);
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
- if (!delayed_work_pending(&dbs_info->work)) {
- mutex_unlock(&dbs_info->timer_mutex);
+ if (!delayed_work_pending(&dbs_info->cdbs.work)) {
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
continue;
}
- next_sampling = jiffies + usecs_to_jiffies(new_rate);
- appointed_at = dbs_info->work.timer.expires;
-
+ next_sampling = jiffies + usecs_to_jiffies(new_rate);
+ appointed_at = dbs_info->cdbs.work.timer.expires;
if (time_before(next_sampling, appointed_at)) {
- mutex_unlock(&dbs_info->timer_mutex);
- cancel_delayed_work_sync(&dbs_info->work);
- mutex_lock(&dbs_info->timer_mutex);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
+ cancel_delayed_work_sync(&dbs_info->cdbs.work);
+ mutex_lock(&dbs_info->cdbs.timer_mutex);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
- usecs_to_jiffies(new_rate));
+ schedule_delayed_work_on(dbs_info->cdbs.cpu,
+ &dbs_info->cdbs.work,
+ usecs_to_jiffies(new_rate));
}
- mutex_unlock(&dbs_info->timer_mutex);
+ mutex_unlock(&dbs_info->cdbs.timer_mutex);
}
}
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
- dbs_tuners_ins.io_is_busy = !!input;
+ od_tuners.io_is_busy = !!input;
return count;
}
input < MIN_FREQUENCY_UP_THRESHOLD) {
return -EINVAL;
}
- dbs_tuners_ins.up_threshold = input;
+ od_tuners.up_threshold = input;
return count;
}
if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1)
return -EINVAL;
- dbs_tuners_ins.sampling_down_factor = input;
+ od_tuners.sampling_down_factor = input;
/* Reset down sampling multiplier in case it was active */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
- dbs_info = &per_cpu(od_cpu_dbs_info, j);
+ struct od_cpu_dbs_info_s *dbs_info = &per_cpu(od_cpu_dbs_info,
+ j);
dbs_info->rate_mult = 1;
}
return count;
if (input > 1)
input = 1;
- if (input == dbs_tuners_ins.ignore_nice) { /* nothing to do */
+ if (input == od_tuners.ignore_nice) { /* nothing to do */
return count;
}
- dbs_tuners_ins.ignore_nice = input;
+ od_tuners.ignore_nice = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
- struct cpu_dbs_info_s *dbs_info;
+ struct od_cpu_dbs_info_s *dbs_info;
dbs_info = &per_cpu(od_cpu_dbs_info, j);
- dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
+ dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
+ &dbs_info->cdbs.prev_cpu_wall);
+ if (od_tuners.ignore_nice)
+ dbs_info->cdbs.prev_cpu_nice =
+ kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
return count;
if (input > 1000)
input = 1000;
- dbs_tuners_ins.powersave_bias = input;
+ od_tuners.powersave_bias = input;
ondemand_powersave_bias_init();
return count;
}
+show_one(od, sampling_rate, sampling_rate);
+show_one(od, io_is_busy, io_is_busy);
+show_one(od, up_threshold, up_threshold);
+show_one(od, sampling_down_factor, sampling_down_factor);
+show_one(od, ignore_nice_load, ignore_nice);
+show_one(od, powersave_bias, powersave_bias);
+
define_one_global_rw(sampling_rate);
define_one_global_rw(io_is_busy);
define_one_global_rw(up_threshold);
define_one_global_rw(sampling_down_factor);
define_one_global_rw(ignore_nice_load);
define_one_global_rw(powersave_bias);
+define_one_global_ro(sampling_rate_min);
static struct attribute *dbs_attributes[] = {
&sampling_rate_min.attr,
NULL
};
-static struct attribute_group dbs_attr_group = {
+static struct attribute_group od_attr_group = {
.attrs = dbs_attributes,
.name = "ondemand",
};
/************************** sysfs end ************************/
-static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
-{
- if (dbs_tuners_ins.powersave_bias)
- freq = powersave_bias_target(p, freq, CPUFREQ_RELATION_H);
- else if (p->cur == p->max)
- return;
-
- __cpufreq_driver_target(p, freq, dbs_tuners_ins.powersave_bias ?
- CPUFREQ_RELATION_L : CPUFREQ_RELATION_H);
-}
-
-static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
-{
- unsigned int max_load_freq;
-
- struct cpufreq_policy *policy;
- unsigned int j;
-
- this_dbs_info->freq_lo = 0;
- policy = this_dbs_info->cur_policy;
-
- /*
- * Every sampling_rate, we check, if current idle time is less
- * than 20% (default), then we try to increase frequency
- * Every sampling_rate, we look for a the lowest
- * frequency which can sustain the load while keeping idle time over
- * 30%. If such a frequency exist, we try to decrease to this frequency.
- *
- * Any frequency increase takes it to the maximum frequency.
- * Frequency reduction happens at minimum steps of
- * 5% (default) of current frequency
- */
-
- /* Get Absolute Load - in terms of freq */
- max_load_freq = 0;
-
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- cputime64_t cur_wall_time, cur_idle_time, cur_iowait_time;
- unsigned int idle_time, wall_time, iowait_time;
- unsigned int load, load_freq;
- int freq_avg;
-
- j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
-
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time);
- cur_iowait_time = get_cpu_iowait_time(j, &cur_wall_time);
-
- wall_time = (unsigned int)
- (cur_wall_time - j_dbs_info->prev_cpu_wall);
- j_dbs_info->prev_cpu_wall = cur_wall_time;
-
- idle_time = (unsigned int)
- (cur_idle_time - j_dbs_info->prev_cpu_idle);
- j_dbs_info->prev_cpu_idle = cur_idle_time;
-
- iowait_time = (unsigned int)
- (cur_iowait_time - j_dbs_info->prev_cpu_iowait);
- j_dbs_info->prev_cpu_iowait = cur_iowait_time;
-
- if (dbs_tuners_ins.ignore_nice) {
- u64 cur_nice;
- unsigned long cur_nice_jiffies;
-
- cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE] -
- j_dbs_info->prev_cpu_nice;
- /*
- * Assumption: nice time between sampling periods will
- * be less than 2^32 jiffies for 32 bit sys
- */
- cur_nice_jiffies = (unsigned long)
- cputime64_to_jiffies64(cur_nice);
-
- j_dbs_info->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- idle_time += jiffies_to_usecs(cur_nice_jiffies);
- }
-
- /*
- * For the purpose of ondemand, waiting for disk IO is an
- * indication that you're performance critical, and not that
- * the system is actually idle. So subtract the iowait time
- * from the cpu idle time.
- */
-
- if (dbs_tuners_ins.io_is_busy && idle_time >= iowait_time)
- idle_time -= iowait_time;
-
- if (unlikely(!wall_time || wall_time < idle_time))
- continue;
-
- load = 100 * (wall_time - idle_time) / wall_time;
-
- freq_avg = __cpufreq_driver_getavg(policy, j);
- if (freq_avg <= 0)
- freq_avg = policy->cur;
-
- load_freq = load * freq_avg;
- if (load_freq > max_load_freq)
- max_load_freq = load_freq;
- }
+define_get_cpu_dbs_routines(od_cpu_dbs_info);
- /* Check for frequency increase */
- if (max_load_freq > dbs_tuners_ins.up_threshold * policy->cur) {
- /* If switching to max speed, apply sampling_down_factor */
- if (policy->cur < policy->max)
- this_dbs_info->rate_mult =
- dbs_tuners_ins.sampling_down_factor;
- dbs_freq_increase(policy, policy->max);
- return;
- }
-
- /* Check for frequency decrease */
- /* if we cannot reduce the frequency anymore, break out early */
- if (policy->cur == policy->min)
- return;
-
- /*
- * The optimal frequency is the frequency that is the lowest that
- * can support the current CPU usage without triggering the up
- * policy. To be safe, we focus 10 points under the threshold.
- */
- if (max_load_freq <
- (dbs_tuners_ins.up_threshold - dbs_tuners_ins.down_differential) *
- policy->cur) {
- unsigned int freq_next;
- freq_next = max_load_freq /
- (dbs_tuners_ins.up_threshold -
- dbs_tuners_ins.down_differential);
-
- /* No longer fully busy, reset rate_mult */
- this_dbs_info->rate_mult = 1;
-
- if (freq_next < policy->min)
- freq_next = policy->min;
-
- if (!dbs_tuners_ins.powersave_bias) {
- __cpufreq_driver_target(policy, freq_next,
- CPUFREQ_RELATION_L);
- } else {
- int freq = powersave_bias_target(policy, freq_next,
- CPUFREQ_RELATION_L);
- __cpufreq_driver_target(policy, freq,
- CPUFREQ_RELATION_L);
- }
- }
-}
-
-static void do_dbs_timer(struct work_struct *work)
-{
- struct cpu_dbs_info_s *dbs_info =
- container_of(work, struct cpu_dbs_info_s, work.work);
- unsigned int cpu = dbs_info->cpu;
- int sample_type = dbs_info->sample_type;
-
- int delay;
-
- mutex_lock(&dbs_info->timer_mutex);
-
- /* Common NORMAL_SAMPLE setup */
- dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- if (!dbs_tuners_ins.powersave_bias ||
- sample_type == DBS_NORMAL_SAMPLE) {
- dbs_check_cpu(dbs_info);
- if (dbs_info->freq_lo) {
- /* Setup timer for SUB_SAMPLE */
- dbs_info->sample_type = DBS_SUB_SAMPLE;
- delay = dbs_info->freq_hi_jiffies;
- } else {
- /* We want all CPUs to do sampling nearly on
- * same jiffy
- */
- delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate
- * dbs_info->rate_mult);
-
- if (num_online_cpus() > 1)
- delay -= jiffies % delay;
- }
- } else {
- __cpufreq_driver_target(dbs_info->cur_policy,
- dbs_info->freq_lo, CPUFREQ_RELATION_H);
- delay = dbs_info->freq_lo_jiffies;
- }
- schedule_delayed_work_on(cpu, &dbs_info->work, delay);
- mutex_unlock(&dbs_info->timer_mutex);
-}
-
-static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
-{
- /* We want all CPUs to do sampling nearly on same jiffy */
- int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
-
- if (num_online_cpus() > 1)
- delay -= jiffies % delay;
+static struct od_ops od_ops = {
+ .io_busy = should_io_be_busy,
+ .powersave_bias_init_cpu = ondemand_powersave_bias_init_cpu,
+ .powersave_bias_target = powersave_bias_target,
+ .freq_increase = dbs_freq_increase,
+};
- dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- INIT_DEFERRABLE_WORK(&dbs_info->work, do_dbs_timer);
- schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work, delay);
-}
+static struct dbs_data od_dbs_data = {
+ .governor = GOV_ONDEMAND,
+ .attr_group = &od_attr_group,
+ .tuners = &od_tuners,
+ .get_cpu_cdbs = get_cpu_cdbs,
+ .get_cpu_dbs_info_s = get_cpu_dbs_info_s,
+ .gov_dbs_timer = od_dbs_timer,
+ .gov_check_cpu = od_check_cpu,
+ .gov_ops = &od_ops,
+};
-static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
+static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
+ unsigned int event)
{
- cancel_delayed_work_sync(&dbs_info->work);
+ return cpufreq_governor_dbs(&od_dbs_data, policy, event);
}
-/*
- * Not all CPUs want IO time to be accounted as busy; this dependson how
- * efficient idling at a higher frequency/voltage is.
- * Pavel Machek says this is not so for various generations of AMD and old
- * Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
- * Because of this, whitelist specific known (series) of CPUs by default, and
- * leave all others up to the user.
- */
-static int should_io_be_busy(void)
-{
-#if defined(CONFIG_X86)
- /*
- * For Intel, Core 2 (model 15) andl later have an efficient idle.
- */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- boot_cpu_data.x86 == 6 &&
- boot_cpu_data.x86_model >= 15)
- return 1;
+#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+static
#endif
- return 0;
-}
-
-static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
- unsigned int event)
-{
- unsigned int cpu = policy->cpu;
- struct cpu_dbs_info_s *this_dbs_info;
- unsigned int j;
- int rc;
-
- this_dbs_info = &per_cpu(od_cpu_dbs_info, cpu);
-
- switch (event) {
- case CPUFREQ_GOV_START:
- if ((!cpu_online(cpu)) || (!policy->cur))
- return -EINVAL;
-
- mutex_lock(&dbs_mutex);
-
- dbs_enable++;
- for_each_cpu(j, policy->cpus) {
- struct cpu_dbs_info_s *j_dbs_info;
- j_dbs_info = &per_cpu(od_cpu_dbs_info, j);
- j_dbs_info->cur_policy = policy;
-
- j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j,
- &j_dbs_info->prev_cpu_wall);
- if (dbs_tuners_ins.ignore_nice)
- j_dbs_info->prev_cpu_nice =
- kcpustat_cpu(j).cpustat[CPUTIME_NICE];
- }
- this_dbs_info->cpu = cpu;
- this_dbs_info->rate_mult = 1;
- ondemand_powersave_bias_init_cpu(cpu);
- /*
- * Start the timerschedule work, when this governor
- * is used for first time
- */
- if (dbs_enable == 1) {
- unsigned int latency;
-
- rc = sysfs_create_group(cpufreq_global_kobject,
- &dbs_attr_group);
- if (rc) {
- mutex_unlock(&dbs_mutex);
- return rc;
- }
-
- /* policy latency is in nS. Convert it to uS first */
- latency = policy->cpuinfo.transition_latency / 1000;
- if (latency == 0)
- latency = 1;
- /* Bring kernel and HW constraints together */
- min_sampling_rate = max(min_sampling_rate,
- MIN_LATENCY_MULTIPLIER * latency);
- dbs_tuners_ins.sampling_rate =
- max(min_sampling_rate,
- latency * LATENCY_MULTIPLIER);
- dbs_tuners_ins.io_is_busy = should_io_be_busy();
- }
- mutex_unlock(&dbs_mutex);
-
- mutex_init(&this_dbs_info->timer_mutex);
- dbs_timer_init(this_dbs_info);
- break;
-
- case CPUFREQ_GOV_STOP:
- dbs_timer_exit(this_dbs_info);
-
- mutex_lock(&dbs_mutex);
- mutex_destroy(&this_dbs_info->timer_mutex);
- dbs_enable--;
- mutex_unlock(&dbs_mutex);
- if (!dbs_enable)
- sysfs_remove_group(cpufreq_global_kobject,
- &dbs_attr_group);
-
- break;
-
- case CPUFREQ_GOV_LIMITS:
- mutex_lock(&this_dbs_info->timer_mutex);
- if (policy->max < this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(this_dbs_info->cur_policy,
- policy->max, CPUFREQ_RELATION_H);
- else if (policy->min > this_dbs_info->cur_policy->cur)
- __cpufreq_driver_target(this_dbs_info->cur_policy,
- policy->min, CPUFREQ_RELATION_L);
- dbs_check_cpu(this_dbs_info);
- mutex_unlock(&this_dbs_info->timer_mutex);
- break;
- }
- return 0;
-}
+struct cpufreq_governor cpufreq_gov_ondemand = {
+ .name = "ondemand",
+ .governor = od_cpufreq_governor_dbs,
+ .max_transition_latency = TRANSITION_LATENCY_LIMIT,
+ .owner = THIS_MODULE,
+};
static int __init cpufreq_gov_dbs_init(void)
{
u64 idle_time;
int cpu = get_cpu();
+ mutex_init(&od_dbs_data.mutex);
idle_time = get_cpu_idle_time_us(cpu, NULL);
put_cpu();
if (idle_time != -1ULL) {
/* Idle micro accounting is supported. Use finer thresholds */
- dbs_tuners_ins.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
- dbs_tuners_ins.down_differential =
- MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
+ od_tuners.up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
+ od_tuners.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
* In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
* timer might skip some samples if idle/sleeping as needed.
*/
- min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
+ od_dbs_data.min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
} else {
/* For correct statistics, we need 10 ticks for each measure */
- min_sampling_rate =
- MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10);
+ od_dbs_data.min_sampling_rate = MIN_SAMPLING_RATE_RATIO *
+ jiffies_to_usecs(10);
}
return cpufreq_register_governor(&cpufreq_gov_ondemand);
cpufreq_unregister_governor(&cpufreq_gov_ondemand);
}
-
MODULE_AUTHOR("Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>");
MODULE_AUTHOR("Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>");
MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for "
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpufreq.h>
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpufreq.h>
unsigned int max_state;
unsigned int state_num;
unsigned int last_index;
- cputime64_t *time_in_state;
+ u64 *time_in_state;
unsigned int *freq_table;
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
unsigned int *trans_table;
count++;
}
- alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
+ alloc_size = count * sizeof(int) + count * sizeof(u64);
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
alloc_size += count * count * sizeof(int);
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/smp.h>
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);
-int exynos_verify_speed(struct cpufreq_policy *policy)
+static int exynos_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy,
exynos_info->freq_table);
}
-unsigned int exynos_getspeed(unsigned int cpu)
+static unsigned int exynos_getspeed(unsigned int cpu)
{
return clk_get_rate(exynos_info->cpu_clk) / 1000;
}
}
arm_volt = volt_table[index];
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* When the new frequency is higher than current frequency */
if ((freqs.new > freqs.old) && !safe_arm_volt) {
if (freqs.new != freqs.old)
exynos_info->set_freq(old_index, index);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
/* When the new frequency is lower than current frequency */
if ((freqs.new < freqs.old) ||
cpumask_copy(policy->related_cpus, cpu_possible_mask);
cpumask_copy(policy->cpus, cpu_online_mask);
} else {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
cpumask_setall(policy->cpus);
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
return 0;
}
-static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
+static int longhaul_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
.target = longhaul_target,
.get = longhaul_get,
.init = longhaul_cpu_init,
- .exit = __devexit_p(longhaul_cpu_exit),
+ .exit = longhaul_cpu_exit,
.name = "longhaul",
.owner = THIS_MODULE,
.attr = longhaul_attr,
return -ENODEV;
}
-static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
+static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
.target = powernowk8_target,
.bios_limit = acpi_processor_get_bios_limit,
.init = powernowk8_cpu_init,
- .exit = __devexit_p(powernowk8_cpu_exit),
+ .exit = powernowk8_cpu_exit,
.get = powernowk8_get,
.name = "powernow-k8",
.owner = THIS_MODULE,
--- /dev/null
+/*
+ * drivers/cpufreq/spear-cpufreq.c
+ *
+ * CPU Frequency Scaling for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Deepak Sikri <deepak.sikri@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SPEAr CPUFreq driver data structure */
+static struct {
+ struct clk *clk;
+ unsigned int transition_latency;
+ struct cpufreq_frequency_table *freq_tbl;
+ u32 cnt;
+} spear_cpufreq;
+
+int spear_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl);
+}
+
+static unsigned int spear_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(spear_cpufreq.clk) / 1000;
+}
+
+static struct clk *spear1340_cpu_get_possible_parent(unsigned long newfreq)
+{
+ struct clk *sys_pclk;
+ int pclk;
+ /*
+ * In SPEAr1340, cpu clk's parent sys clk can take input from
+ * following sources
+ */
+ const char *sys_clk_src[] = {
+ "sys_syn_clk",
+ "pll1_clk",
+ "pll2_clk",
+ "pll3_clk",
+ };
+
+ /*
+ * As sys clk can have multiple source with their own range
+ * limitation so we choose possible sources accordingly
+ */
+ if (newfreq <= 300000000)
+ pclk = 0; /* src is sys_syn_clk */
+ else if (newfreq > 300000000 && newfreq <= 500000000)
+ pclk = 3; /* src is pll3_clk */
+ else if (newfreq == 600000000)
+ pclk = 1; /* src is pll1_clk */
+ else
+ return ERR_PTR(-EINVAL);
+
+ /* Get parent to sys clock */
+ sys_pclk = clk_get(NULL, sys_clk_src[pclk]);
+ if (IS_ERR(sys_pclk))
+ pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);
+
+ return sys_pclk;
+}
+
+/*
+ * In SPEAr1340, we cannot use newfreq directly because we need to actually
+ * access a source clock (clk) which might not be ancestor of cpu at present.
+ * Hence in SPEAr1340 we would operate on source clock directly before switching
+ * cpu clock to it.
+ */
+static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq)
+{
+ struct clk *sys_clk;
+ int ret = 0;
+
+ sys_clk = clk_get_parent(spear_cpufreq.clk);
+ if (IS_ERR(sys_clk)) {
+ pr_err("failed to get cpu's parent (sys) clock\n");
+ return PTR_ERR(sys_clk);
+ }
+
+ /* Set the rate of the source clock before changing the parent */
+ ret = clk_set_rate(sys_pclk, newfreq);
+ if (ret) {
+ pr_err("Failed to set sys clk rate to %lu\n", newfreq);
+ return ret;
+ }
+
+ ret = clk_set_parent(sys_clk, sys_pclk);
+ if (ret) {
+ pr_err("Failed to set sys clk parent\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int spear_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long newfreq;
+ struct clk *srcclk;
+ int index, ret, mult = 1;
+
+ if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl,
+ target_freq, relation, &index))
+ return -EINVAL;
+
+ freqs.cpu = policy->cpu;
+ freqs.old = spear_cpufreq_get(0);
+
+ newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000;
+ if (of_machine_is_compatible("st,spear1340")) {
+ /*
+ * SPEAr1340 is special in the sense that due to the possibility
+ * of multiple clock sources for cpu clk's parent we can have
+ * different clock source for different frequency of cpu clk.
+ * Hence we need to choose one from amongst these possible clock
+ * sources.
+ */
+ srcclk = spear1340_cpu_get_possible_parent(newfreq);
+ if (IS_ERR(srcclk)) {
+ pr_err("Failed to get src clk\n");
+ return PTR_ERR(srcclk);
+ }
+
+ /* SPEAr1340: src clk is always 2 * intended cpu clk */
+ mult = 2;
+ } else {
+ /*
+ * src clock to be altered is ancestor of cpu clock. Hence we
+ * can directly work on cpu clk
+ */
+ srcclk = spear_cpufreq.clk;
+ }
+
+ newfreq = clk_round_rate(srcclk, newfreq * mult);
+ if (newfreq < 0) {
+ pr_err("clk_round_rate failed for cpu src clock\n");
+ return newfreq;
+ }
+
+ freqs.new = newfreq / 1000;
+ freqs.new /= mult;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (mult == 2)
+ ret = spear1340_set_cpu_rate(srcclk, newfreq);
+ else
+ ret = clk_set_rate(spear_cpufreq.clk, newfreq);
+
+ /* Get current rate after clk_set_rate, in case of failure */
+ if (ret) {
+ pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);
+ freqs.new = clk_get_rate(spear_cpufreq.clk) / 1000;
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ return ret;
+}
+
+static int spear_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl);
+ if (ret) {
+ pr_err("cpufreq_frequency_table_cpuinfo() failed");
+ return ret;
+ }
+
+ cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu);
+ policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency;
+ policy->cur = spear_cpufreq_get(0);
+
+ cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
+ cpumask_copy(policy->related_cpus, policy->cpus);
+
+ return 0;
+}
+
+static int spear_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *spear_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver spear_cpufreq_driver = {
+ .name = "cpufreq-spear",
+ .flags = CPUFREQ_STICKY,
+ .verify = spear_cpufreq_verify,
+ .target = spear_cpufreq_target,
+ .get = spear_cpufreq_get,
+ .init = spear_cpufreq_init,
+ .exit = spear_cpufreq_exit,
+ .attr = spear_cpufreq_attr,
+};
+
+static int spear_cpufreq_driver_init(void)
+{
+ struct device_node *np;
+ const struct property *prop;
+ struct cpufreq_frequency_table *freq_tbl;
+ const __be32 *val;
+ int cnt, i, ret;
+
+ np = of_find_node_by_path("/cpus/cpu@0");
+ if (!np) {
+ pr_err("No cpu node found");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(np, "clock-latency",
+ &spear_cpufreq.transition_latency))
+ spear_cpufreq.transition_latency = CPUFREQ_ETERNAL;
+
+ prop = of_find_property(np, "cpufreq_tbl", NULL);
+ if (!prop || !prop->value) {
+ pr_err("Invalid cpufreq_tbl");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cnt = prop->length / sizeof(u32);
+ val = prop->value;
+
+ freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+ if (!freq_tbl) {
+ ret = -ENOMEM;
+ goto out_put_node;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ freq_tbl[i].index = i;
+ freq_tbl[i].frequency = be32_to_cpup(val++);
+ }
+
+ freq_tbl[i].index = i;
+ freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+ spear_cpufreq.freq_tbl = freq_tbl;
+
+ of_node_put(np);
+
+ spear_cpufreq.clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(spear_cpufreq.clk)) {
+ pr_err("Unable to get CPU clock\n");
+ ret = PTR_ERR(spear_cpufreq.clk);
+ goto out_put_mem;
+ }
+
+ ret = cpufreq_register_driver(&spear_cpufreq_driver);
+ if (!ret)
+ return 0;
+
+ pr_err("failed register driver: %d\n", ret);
+ clk_put(spear_cpufreq.clk);
+
+out_put_mem:
+ kfree(freq_tbl);
+ return ret;
+
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+late_initcall(spear_cpufreq_driver_init);
+
+MODULE_AUTHOR("Deepak Sikri <deepak.sikri@st.com>");
+MODULE_DESCRIPTION("SPEAr CPUFreq driver");
+MODULE_LICENSE("GPL");
If you're using an ACPI-enabled platform, you should say Y here.
+config CPU_IDLE_MULTIPLE_DRIVERS
+ bool "Support multiple cpuidle drivers"
+ depends on CPU_IDLE
+ default n
+ help
+ Allows the cpuidle framework to use different drivers for each CPU.
+ This is useful if you have a system with different CPU latencies and
+ states. If unsure say N.
+
config CPU_IDLE_GOV_LADDER
bool
depends on CPU_IDLE
int cpuidle_play_dead(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
int i, dead_state = -1;
int power_usage = -1;
/* This can be moved to within driver enter routine
* but that results in multiple copies of same code.
*/
- dev->states_usage[entered_state].time +=
- (unsigned long long)dev->last_residency;
+ dev->states_usage[entered_state].time += dev->last_residency;
dev->states_usage[entered_state].usage++;
} else {
dev->last_residency = 0;
int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv;
int next_state, entered_state;
if (off)
if (!dev || !dev->enabled)
return -EBUSY;
+ drv = cpuidle_get_cpu_driver(dev);
+
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
+ dev->last_residency = 0;
+ /* give the governor an opportunity to reflect on the outcome */
+ if (cpuidle_curr_governor->reflect)
+ cpuidle_curr_governor->reflect(dev, next_state);
local_irq_enable();
return 0;
}
int cpuidle_enable_device(struct cpuidle_device *dev)
{
int ret, i;
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv;
if (!dev)
return -EINVAL;
if (dev->enabled)
return 0;
+
+ drv = cpuidle_get_cpu_driver(dev);
+
if (!drv || !cpuidle_curr_governor)
return -EIO;
+
if (!dev->state_count)
dev->state_count = drv->state_count;
poll_idle_init(drv);
- if ((ret = cpuidle_add_state_sysfs(dev)))
+ ret = cpuidle_add_device_sysfs(dev);
+ if (ret)
return ret;
if (cpuidle_curr_governor->enable &&
return 0;
fail_sysfs:
- cpuidle_remove_state_sysfs(dev);
+ cpuidle_remove_device_sysfs(dev);
return ret;
}
*/
void cpuidle_disable_device(struct cpuidle_device *dev)
{
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+
if (!dev || !dev->enabled)
return;
- if (!cpuidle_get_driver() || !cpuidle_curr_governor)
+
+ if (!drv || !cpuidle_curr_governor)
return;
dev->enabled = 0;
if (cpuidle_curr_governor->disable)
- cpuidle_curr_governor->disable(cpuidle_get_driver(), dev);
+ cpuidle_curr_governor->disable(drv, dev);
- cpuidle_remove_state_sysfs(dev);
+ cpuidle_remove_device_sysfs(dev);
enabled_devices--;
}
static int __cpuidle_register_device(struct cpuidle_device *dev)
{
int ret;
- struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
- struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
- if (!try_module_get(cpuidle_driver->owner))
+ if (!try_module_get(drv->owner))
return -EINVAL;
- init_completion(&dev->kobj_unregister);
-
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
- ret = cpuidle_add_sysfs(cpu_dev);
+ ret = cpuidle_add_sysfs(dev);
if (ret)
goto err_sysfs;
return 0;
err_coupled:
- cpuidle_remove_sysfs(cpu_dev);
- wait_for_completion(&dev->kobj_unregister);
+ cpuidle_remove_sysfs(dev);
err_sysfs:
list_del(&dev->device_list);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
- module_put(cpuidle_driver->owner);
+ module_put(drv->owner);
return ret;
}
*/
void cpuidle_unregister_device(struct cpuidle_device *dev)
{
- struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
- struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
if (dev->registered == 0)
return;
cpuidle_disable_device(dev);
- cpuidle_remove_sysfs(cpu_dev);
+ cpuidle_remove_sysfs(dev);
list_del(&dev->device_list);
- wait_for_completion(&dev->kobj_unregister);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
cpuidle_coupled_unregister_device(dev);
cpuidle_resume_and_unlock();
- module_put(cpuidle_driver->owner);
+ module_put(drv->owner);
}
EXPORT_SYMBOL_GPL(cpuidle_unregister_device);
#ifndef __DRIVER_CPUIDLE_H
#define __DRIVER_CPUIDLE_H
-#include <linux/device.h>
-
/* For internal use only */
extern struct cpuidle_governor *cpuidle_curr_governor;
extern struct list_head cpuidle_governors;
extern int cpuidle_switch_governor(struct cpuidle_governor *gov);
/* sysfs */
+
+struct device;
+
extern int cpuidle_add_interface(struct device *dev);
extern void cpuidle_remove_interface(struct device *dev);
-extern int cpuidle_add_state_sysfs(struct cpuidle_device *device);
-extern void cpuidle_remove_state_sysfs(struct cpuidle_device *device);
-extern int cpuidle_add_sysfs(struct device *dev);
-extern void cpuidle_remove_sysfs(struct device *dev);
+extern int cpuidle_add_device_sysfs(struct cpuidle_device *device);
+extern void cpuidle_remove_device_sysfs(struct cpuidle_device *device);
+extern int cpuidle_add_sysfs(struct cpuidle_device *dev);
+extern void cpuidle_remove_sysfs(struct cpuidle_device *dev);
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
#include "cpuidle.h"
-static struct cpuidle_driver *cpuidle_curr_driver;
DEFINE_SPINLOCK(cpuidle_driver_lock);
-int cpuidle_driver_refcount;
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu);
+static struct cpuidle_driver * __cpuidle_get_cpu_driver(int cpu);
static void set_power_states(struct cpuidle_driver *drv)
{
drv->states[i].power_usage = -1 - i;
}
-/**
- * cpuidle_register_driver - registers a driver
- * @drv: the driver
- */
-int cpuidle_register_driver(struct cpuidle_driver *drv)
+static void __cpuidle_driver_init(struct cpuidle_driver *drv)
+{
+ drv->refcnt = 0;
+
+ if (!drv->power_specified)
+ set_power_states(drv);
+}
+
+static int __cpuidle_register_driver(struct cpuidle_driver *drv, int cpu)
{
if (!drv || !drv->state_count)
return -EINVAL;
if (cpuidle_disabled())
return -ENODEV;
- spin_lock(&cpuidle_driver_lock);
- if (cpuidle_curr_driver) {
- spin_unlock(&cpuidle_driver_lock);
+ if (__cpuidle_get_cpu_driver(cpu))
return -EBUSY;
+
+ __cpuidle_driver_init(drv);
+
+ __cpuidle_set_cpu_driver(drv, cpu);
+
+ return 0;
+}
+
+static void __cpuidle_unregister_driver(struct cpuidle_driver *drv, int cpu)
+{
+ if (drv != __cpuidle_get_cpu_driver(cpu))
+ return;
+
+ if (!WARN_ON(drv->refcnt > 0))
+ __cpuidle_set_cpu_driver(NULL, cpu);
+}
+
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+
+static DEFINE_PER_CPU(struct cpuidle_driver *, cpuidle_drivers);
+
+static void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ per_cpu(cpuidle_drivers, cpu) = drv;
+}
+
+static struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
+{
+ return per_cpu(cpuidle_drivers, cpu);
+}
+
+static void __cpuidle_unregister_all_cpu_driver(struct cpuidle_driver *drv)
+{
+ int cpu;
+ for_each_present_cpu(cpu)
+ __cpuidle_unregister_driver(drv, cpu);
+}
+
+static int __cpuidle_register_all_cpu_driver(struct cpuidle_driver *drv)
+{
+ int ret = 0;
+ int i, cpu;
+
+ for_each_present_cpu(cpu) {
+ ret = __cpuidle_register_driver(drv, cpu);
+ if (ret)
+ break;
}
- if (!drv->power_specified)
- set_power_states(drv);
+ if (ret)
+ for_each_present_cpu(i) {
+ if (i == cpu)
+ break;
+ __cpuidle_unregister_driver(drv, i);
+ }
- cpuidle_curr_driver = drv;
+ return ret;
+}
+
+int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ int ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_driver(drv, cpu);
spin_unlock(&cpuidle_driver_lock);
- return 0;
+ return ret;
+}
+
+void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ spin_lock(&cpuidle_driver_lock);
+ __cpuidle_unregister_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+}
+
+/**
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
+ */
+int cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+ int ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_all_cpu_driver(drv);
+ spin_unlock(&cpuidle_driver_lock);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(cpuidle_register_driver);
/**
- * cpuidle_get_driver - return the current driver
+ * cpuidle_unregister_driver - unregisters a driver
+ * @drv: the driver
*/
-struct cpuidle_driver *cpuidle_get_driver(void)
+void cpuidle_unregister_driver(struct cpuidle_driver *drv)
+{
+ spin_lock(&cpuidle_driver_lock);
+ __cpuidle_unregister_all_cpu_driver(drv);
+ spin_unlock(&cpuidle_driver_lock);
+}
+EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+
+#else
+
+static struct cpuidle_driver *cpuidle_curr_driver;
+
+static inline void __cpuidle_set_cpu_driver(struct cpuidle_driver *drv, int cpu)
+{
+ cpuidle_curr_driver = drv;
+}
+
+static inline struct cpuidle_driver *__cpuidle_get_cpu_driver(int cpu)
{
return cpuidle_curr_driver;
}
-EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+
+/**
+ * cpuidle_register_driver - registers a driver
+ * @drv: the driver
+ */
+int cpuidle_register_driver(struct cpuidle_driver *drv)
+{
+ int ret, cpu;
+
+ cpu = get_cpu();
+ spin_lock(&cpuidle_driver_lock);
+ ret = __cpuidle_register_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+ put_cpu();
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpuidle_register_driver);
/**
* cpuidle_unregister_driver - unregisters a driver
*/
void cpuidle_unregister_driver(struct cpuidle_driver *drv)
{
- if (drv != cpuidle_curr_driver) {
- WARN(1, "invalid cpuidle_unregister_driver(%s)\n",
- drv->name);
- return;
- }
+ int cpu;
+ cpu = get_cpu();
spin_lock(&cpuidle_driver_lock);
+ __cpuidle_unregister_driver(drv, cpu);
+ spin_unlock(&cpuidle_driver_lock);
+ put_cpu();
+}
+EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+#endif
+
+/**
+ * cpuidle_get_driver - return the current driver
+ */
+struct cpuidle_driver *cpuidle_get_driver(void)
+{
+ struct cpuidle_driver *drv;
+ int cpu;
- if (!WARN_ON(cpuidle_driver_refcount > 0))
- cpuidle_curr_driver = NULL;
+ cpu = get_cpu();
+ drv = __cpuidle_get_cpu_driver(cpu);
+ put_cpu();
+ return drv;
+}
+EXPORT_SYMBOL_GPL(cpuidle_get_driver);
+
+/**
+ * cpuidle_get_cpu_driver - return the driver tied with a cpu
+ */
+struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver *drv;
+
+ if (!dev)
+ return NULL;
+
+ spin_lock(&cpuidle_driver_lock);
+ drv = __cpuidle_get_cpu_driver(dev->cpu);
spin_unlock(&cpuidle_driver_lock);
+
+ return drv;
}
-EXPORT_SYMBOL_GPL(cpuidle_unregister_driver);
+EXPORT_SYMBOL_GPL(cpuidle_get_cpu_driver);
struct cpuidle_driver *cpuidle_driver_ref(void)
{
spin_lock(&cpuidle_driver_lock);
- drv = cpuidle_curr_driver;
- cpuidle_driver_refcount++;
+ drv = cpuidle_get_driver();
+ drv->refcnt++;
spin_unlock(&cpuidle_driver_lock);
return drv;
void cpuidle_driver_unref(void)
{
+ struct cpuidle_driver *drv = cpuidle_get_driver();
+
spin_lock(&cpuidle_driver_lock);
- if (!WARN_ON(cpuidle_driver_refcount <= 0))
- cpuidle_driver_refcount--;
+ if (drv && !WARN_ON(drv->refcnt <= 0))
+ drv->refcnt--;
spin_unlock(&cpuidle_driver_lock);
}
#define MAX_INTERESTING 50000
#define STDDEV_THRESH 400
+/* 60 * 60 > STDDEV_THRESH * INTERVALS = 400 * 8 */
+#define MAX_DEVIATION 60
+
+static DEFINE_PER_CPU(struct hrtimer, menu_hrtimer);
+static DEFINE_PER_CPU(int, hrtimer_status);
+/* menu hrtimer mode */
+enum {MENU_HRTIMER_STOP, MENU_HRTIMER_REPEAT, MENU_HRTIMER_GENERAL};
/*
* Concepts and ideas behind the menu governor
*
*/
+/*
+ * The C-state residency is so long that is is worthwhile to exit
+ * from the shallow C-state and re-enter into a deeper C-state.
+ */
+static unsigned int perfect_cstate_ms __read_mostly = 30;
+module_param(perfect_cstate_ms, uint, 0000);
+
struct menu_device {
int last_state_idx;
int needs_update;
return div_u64(dividend + (divisor / 2), divisor);
}
+/* Cancel the hrtimer if it is not triggered yet */
+void menu_hrtimer_cancel(void)
+{
+ int cpu = smp_processor_id();
+ struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
+
+ /* The timer is still not time out*/
+ if (per_cpu(hrtimer_status, cpu)) {
+ hrtimer_cancel(hrtmr);
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+ }
+}
+EXPORT_SYMBOL_GPL(menu_hrtimer_cancel);
+
+/* Call back for hrtimer is triggered */
+static enum hrtimer_restart menu_hrtimer_notify(struct hrtimer *hrtimer)
+{
+ int cpu = smp_processor_id();
+ struct menu_device *data = &per_cpu(menu_devices, cpu);
+
+ /* In general case, the expected residency is much larger than
+ * deepest C-state target residency, but prediction logic still
+ * predicts a small predicted residency, so the prediction
+ * history is totally broken if the timer is triggered.
+ * So reset the correction factor.
+ */
+ if (per_cpu(hrtimer_status, cpu) == MENU_HRTIMER_GENERAL)
+ data->correction_factor[data->bucket] = RESOLUTION * DECAY;
+
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_STOP;
+
+ return HRTIMER_NORESTART;
+}
+
/*
* Try detecting repeating patterns by keeping track of the last 8
* intervals, and checking if the standard deviation of that set
* of points is below a threshold. If it is... then use the
* average of these 8 points as the estimated value.
*/
-static void detect_repeating_patterns(struct menu_device *data)
+static u32 get_typical_interval(struct menu_device *data)
{
- int i;
- uint64_t avg = 0;
- uint64_t stddev = 0; /* contains the square of the std deviation */
-
- /* first calculate average and standard deviation of the past */
- for (i = 0; i < INTERVALS; i++)
- avg += data->intervals[i];
- avg = avg / INTERVALS;
+ int i = 0, divisor = 0;
+ uint64_t max = 0, avg = 0, stddev = 0;
+ int64_t thresh = LLONG_MAX; /* Discard outliers above this value. */
+ unsigned int ret = 0;
- /* if the avg is beyond the known next tick, it's worthless */
- if (avg > data->expected_us)
- return;
+again:
- for (i = 0; i < INTERVALS; i++)
- stddev += (data->intervals[i] - avg) *
- (data->intervals[i] - avg);
-
- stddev = stddev / INTERVALS;
+ /* first calculate average and standard deviation of the past */
+ max = avg = divisor = stddev = 0;
+ for (i = 0; i < INTERVALS; i++) {
+ int64_t value = data->intervals[i];
+ if (value <= thresh) {
+ avg += value;
+ divisor++;
+ if (value > max)
+ max = value;
+ }
+ }
+ do_div(avg, divisor);
+ for (i = 0; i < INTERVALS; i++) {
+ int64_t value = data->intervals[i];
+ if (value <= thresh) {
+ int64_t diff = value - avg;
+ stddev += diff * diff;
+ }
+ }
+ do_div(stddev, divisor);
+ stddev = int_sqrt(stddev);
/*
- * now.. if stddev is small.. then assume we have a
- * repeating pattern and predict we keep doing this.
+ * If we have outliers to the upside in our distribution, discard
+ * those by setting the threshold to exclude these outliers, then
+ * calculate the average and standard deviation again. Once we get
+ * down to the bottom 3/4 of our samples, stop excluding samples.
+ *
+ * This can deal with workloads that have long pauses interspersed
+ * with sporadic activity with a bunch of short pauses.
+ *
+ * The typical interval is obtained when standard deviation is small
+ * or standard deviation is small compared to the average interval.
*/
-
- if (avg && stddev < STDDEV_THRESH)
+ if (((avg > stddev * 6) && (divisor * 4 >= INTERVALS * 3))
+ || stddev <= 20) {
data->predicted_us = avg;
+ ret = 1;
+ return ret;
+
+ } else if ((divisor * 4) > INTERVALS * 3) {
+ /* Exclude the max interval */
+ thresh = max - 1;
+ goto again;
+ }
+
+ return ret;
}
/**
int i;
int multiplier;
struct timespec t;
+ int repeat = 0, low_predicted = 0;
+ int cpu = smp_processor_id();
+ struct hrtimer *hrtmr = &per_cpu(menu_hrtimer, cpu);
if (data->needs_update) {
menu_update(drv, dev);
data->predicted_us = div_round64(data->expected_us * data->correction_factor[data->bucket],
RESOLUTION * DECAY);
- detect_repeating_patterns(data);
+ repeat = get_typical_interval(data);
/*
* We want to default to C1 (hlt), not to busy polling
if (s->disabled || su->disable)
continue;
- if (s->target_residency > data->predicted_us)
+ if (s->target_residency > data->predicted_us) {
+ low_predicted = 1;
continue;
+ }
if (s->exit_latency > latency_req)
continue;
if (s->exit_latency * multiplier > data->predicted_us)
}
}
+ /* not deepest C-state chosen for low predicted residency */
+ if (low_predicted) {
+ unsigned int timer_us = 0;
+ unsigned int perfect_us = 0;
+
+ /*
+ * Set a timer to detect whether this sleep is much
+ * longer than repeat mode predicted. If the timer
+ * triggers, the code will evaluate whether to put
+ * the CPU into a deeper C-state.
+ * The timer is cancelled on CPU wakeup.
+ */
+ timer_us = 2 * (data->predicted_us + MAX_DEVIATION);
+
+ perfect_us = perfect_cstate_ms * 1000;
+
+ if (repeat && (4 * timer_us < data->expected_us)) {
+ RCU_NONIDLE(hrtimer_start(hrtmr,
+ ns_to_ktime(1000 * timer_us),
+ HRTIMER_MODE_REL_PINNED));
+ /* In repeat case, menu hrtimer is started */
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_REPEAT;
+ } else if (perfect_us < data->expected_us) {
+ /*
+ * The next timer is long. This could be because
+ * we did not make a useful prediction.
+ * In that case, it makes sense to re-enter
+ * into a deeper C-state after some time.
+ */
+ RCU_NONIDLE(hrtimer_start(hrtmr,
+ ns_to_ktime(1000 * timer_us),
+ HRTIMER_MODE_REL_PINNED));
+ /* In general case, menu hrtimer is started */
+ per_cpu(hrtimer_status, cpu) = MENU_HRTIMER_GENERAL;
+ }
+
+ }
+
return data->last_state_idx;
}
struct cpuidle_device *dev)
{
struct menu_device *data = &per_cpu(menu_devices, dev->cpu);
+ struct hrtimer *t = &per_cpu(menu_hrtimer, dev->cpu);
+ hrtimer_init(t, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ t->function = menu_hrtimer_notify;
memset(data, 0, sizeof(struct menu_device));
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/capability.h>
+#include <linux/device.h>
#include "cpuidle.h"
NULL
};
+struct cpuidle_state_kobj {
+ struct cpuidle_state *state;
+ struct cpuidle_state_usage *state_usage;
+ struct completion kobj_unregister;
+ struct kobject kobj;
+};
+
#define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj)
#define kobj_to_state(k) (kobj_to_state_obj(k)->state)
#define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage)
}
/**
- * cpuidle_add_driver_sysfs - adds driver-specific sysfs attributes
+ * cpuidle_add_state_sysfs - adds cpuidle states sysfs attributes
* @device: the target device
*/
-int cpuidle_add_state_sysfs(struct cpuidle_device *device)
+static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
{
int i, ret = -ENOMEM;
struct cpuidle_state_kobj *kobj;
- struct cpuidle_driver *drv = cpuidle_get_driver();
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(device);
/* state statistics */
- for (i = 0; i < device->state_count; i++) {
+ for (i = 0; i < drv->state_count; i++) {
kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
if (!kobj)
goto error_state;
kobj->state_usage = &device->states_usage[i];
init_completion(&kobj->kobj_unregister);
- ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj,
- "state%d", i);
+ ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
+ &device->kobj, "state%d", i);
if (ret) {
kfree(kobj);
goto error_state;
}
/**
- * cpuidle_remove_driver_sysfs - removes driver-specific sysfs attributes
+ * cpuidle_remove_driver_sysfs - removes the cpuidle states sysfs attributes
* @device: the target device
*/
-void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
+static void cpuidle_remove_state_sysfs(struct cpuidle_device *device)
{
int i;
cpuidle_free_state_kobj(device, i);
}
+#ifdef CONFIG_CPU_IDLE_MULTIPLE_DRIVERS
+#define kobj_to_driver_kobj(k) container_of(k, struct cpuidle_driver_kobj, kobj)
+#define attr_to_driver_attr(a) container_of(a, struct cpuidle_driver_attr, attr)
+
+#define define_one_driver_ro(_name, show) \
+ static struct cpuidle_driver_attr attr_driver_##_name = \
+ __ATTR(_name, 0644, show, NULL)
+
+struct cpuidle_driver_kobj {
+ struct cpuidle_driver *drv;
+ struct completion kobj_unregister;
+ struct kobject kobj;
+};
+
+struct cpuidle_driver_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct cpuidle_driver *, char *);
+ ssize_t (*store)(struct cpuidle_driver *, const char *, size_t);
+};
+
+static ssize_t show_driver_name(struct cpuidle_driver *drv, char *buf)
+{
+ ssize_t ret;
+
+ spin_lock(&cpuidle_driver_lock);
+ ret = sprintf(buf, "%s\n", drv ? drv->name : "none");
+ spin_unlock(&cpuidle_driver_lock);
+
+ return ret;
+}
+
+static void cpuidle_driver_sysfs_release(struct kobject *kobj)
+{
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ complete(&driver_kobj->kobj_unregister);
+}
+
+static ssize_t cpuidle_driver_show(struct kobject *kobj, struct attribute * attr,
+ char * buf)
+{
+ int ret = -EIO;
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+ if (dattr->show)
+ ret = dattr->show(driver_kobj->drv, buf);
+
+ return ret;
+}
+
+static ssize_t cpuidle_driver_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret = -EIO;
+ struct cpuidle_driver_kobj *driver_kobj = kobj_to_driver_kobj(kobj);
+ struct cpuidle_driver_attr *dattr = attr_to_driver_attr(attr);
+
+ if (dattr->store)
+ ret = dattr->store(driver_kobj->drv, buf, size);
+
+ return ret;
+}
+
+define_one_driver_ro(name, show_driver_name);
+
+static const struct sysfs_ops cpuidle_driver_sysfs_ops = {
+ .show = cpuidle_driver_show,
+ .store = cpuidle_driver_store,
+};
+
+static struct attribute *cpuidle_driver_default_attrs[] = {
+ &attr_driver_name.attr,
+ NULL
+};
+
+static struct kobj_type ktype_driver_cpuidle = {
+ .sysfs_ops = &cpuidle_driver_sysfs_ops,
+ .default_attrs = cpuidle_driver_default_attrs,
+ .release = cpuidle_driver_sysfs_release,
+};
+
+/**
+ * cpuidle_add_driver_sysfs - adds the driver name sysfs attribute
+ * @device: the target device
+ */
+static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver_kobj *kdrv;
+ struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+ int ret;
+
+ kdrv = kzalloc(sizeof(*kdrv), GFP_KERNEL);
+ if (!kdrv)
+ return -ENOMEM;
+
+ kdrv->drv = drv;
+ init_completion(&kdrv->kobj_unregister);
+
+ ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
+ &dev->kobj, "driver");
+ if (ret) {
+ kfree(kdrv);
+ return ret;
+ }
+
+ kobject_uevent(&kdrv->kobj, KOBJ_ADD);
+ dev->kobj_driver = kdrv;
+
+ return ret;
+}
+
+/**
+ * cpuidle_remove_driver_sysfs - removes the driver name sysfs attribute
+ * @device: the target device
+ */
+static void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+ struct cpuidle_driver_kobj *kdrv = dev->kobj_driver;
+ kobject_put(&kdrv->kobj);
+ wait_for_completion(&kdrv->kobj_unregister);
+ kfree(kdrv);
+}
+#else
+static inline int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
+{
+ return 0;
+}
+
+static inline void cpuidle_remove_driver_sysfs(struct cpuidle_device *dev)
+{
+ ;
+}
+#endif
+
+/**
+ * cpuidle_add_device_sysfs - adds device specific sysfs attributes
+ * @device: the target device
+ */
+int cpuidle_add_device_sysfs(struct cpuidle_device *device)
+{
+ int ret;
+
+ ret = cpuidle_add_state_sysfs(device);
+ if (ret)
+ return ret;
+
+ ret = cpuidle_add_driver_sysfs(device);
+ if (ret)
+ cpuidle_remove_state_sysfs(device);
+ return ret;
+}
+
+/**
+ * cpuidle_remove_device_sysfs : removes device specific sysfs attributes
+ * @device : the target device
+ */
+void cpuidle_remove_device_sysfs(struct cpuidle_device *device)
+{
+ cpuidle_remove_driver_sysfs(device);
+ cpuidle_remove_state_sysfs(device);
+}
+
/**
* cpuidle_add_sysfs - creates a sysfs instance for the target device
* @dev: the target device
*/
-int cpuidle_add_sysfs(struct device *cpu_dev)
+int cpuidle_add_sysfs(struct cpuidle_device *dev)
{
- int cpu = cpu_dev->id;
- struct cpuidle_device *dev;
+ struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
int error;
- dev = per_cpu(cpuidle_devices, cpu);
+ init_completion(&dev->kobj_unregister);
+
error = kobject_init_and_add(&dev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
"cpuidle");
if (!error)
* cpuidle_remove_sysfs - deletes a sysfs instance on the target device
* @dev: the target device
*/
-void cpuidle_remove_sysfs(struct device *cpu_dev)
+void cpuidle_remove_sysfs(struct cpuidle_device *dev)
{
- int cpu = cpu_dev->id;
- struct cpuidle_device *dev;
-
- dev = per_cpu(cpuidle_devices, cpu);
kobject_put(&dev->kobj);
+ wait_for_completion(&dev->kobj_unregister);
}
opp = opp_find_freq_floor(dev, freq);
/* If not available, use the closest opp */
- if (opp == ERR_PTR(-ENODEV))
+ if (opp == ERR_PTR(-ERANGE))
opp = opp_find_freq_ceil(dev, freq);
} else {
/* The freq is an lower bound. opp should be higher */
opp = opp_find_freq_ceil(dev, freq);
/* If not available, use the closest opp */
- if (opp == ERR_PTR(-ENODEV))
+ if (opp == ERR_PTR(-ERANGE))
opp = opp_find_freq_floor(dev, freq);
}
* detection. The mods to Rev F required more family
* information detection.
*
- * Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ * Changes/Fixes by Borislav Petkov <bp@alien8.de>:
* - misc fixes and code cleanups
*
* This module is based on the following documents
*
* 2007 (c) MontaVista Software, Inc.
* 2010 (c) Advanced Micro Devices Inc.
- * Borislav Petkov <borislav.petkov@amd.com>
+ * Borislav Petkov <bp@alien8.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* This file may be distributed under the terms of the GNU General Public
* License version 2.
*
- * Copyright (c) 2010: Borislav Petkov <borislav.petkov@amd.com>
+ * Copyright (c) 2010: Borislav Petkov <bp@alien8.de>
* Advanced Micro Devices Inc.
*/
module_exit(edac_exit_mce_inject);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Borislav Petkov <borislav.petkov@amd.com>");
+MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
MODULE_AUTHOR("AMD Inc.");
MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");
struct sbp2_logical_unit *lu = sdev->hostdata;
sdev->use_10_for_rw = 1;
+ sdev->no_report_opcodes = 1;
+ sdev->no_write_same = 1;
if (sbp2_param_exclusive_login)
sdev->manage_start_stop = 1;
config GPIO_ADNP
tristate "Avionic Design N-bit GPIO expander"
- depends on I2C && OF
+ depends on I2C && OF_GPIO
help
This option enables support for N GPIOs found on Avionic Design
I2C GPIO expanders. The register space will be extended by powers
/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
{
break;
#endif /* CONFIG_SPI_MASTER */
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
case MCP_TYPE_008:
mcp->ops = &mcp23008_ops;
mcp->chip.ngpio = 8;
/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
static int __devinit mcp230xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
return mvchip->membase + GPIO_OUT_OFF;
}
+static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_BLINK_EN_OFF;
+}
+
static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
{
return mvchip->membase + GPIO_IO_CONF_OFF;
return (u >> pin) & 1;
}
+static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ unsigned long flags;
+ u32 u;
+
+ spin_lock_irqsave(&mvchip->lock, flags);
+ u = readl_relaxed(mvebu_gpioreg_blink(mvchip));
+ if (value)
+ u |= 1 << pin;
+ else
+ u &= ~(1 << pin);
+ writel_relaxed(u, mvebu_gpioreg_blink(mvchip));
+ spin_unlock_irqrestore(&mvchip->lock, flags);
+}
+
static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
struct mvebu_gpio_chip *mvchip =
if (ret)
return ret;
+ mvebu_gpio_blink(chip, pin, 0);
mvebu_gpio_set(chip, pin, value);
spin_lock_irqsave(&mvchip->lock, flags);
int old_dpms;
/* PCH platforms and VLV only support on/off. */
- if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+ if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
mode = DRM_MODE_DPMS_OFF;
if (mode == connector->dpms)
}
}
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ /* Use VBT settings if we have an eDP panel */
+ unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+ if (edp_bpc < display_bpc) {
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+ display_bpc = edp_bpc;
+ }
+ continue;
+ }
+
/*
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
* through, clamp it down. (Note: >12bpc will be caught below.)
return true;
}
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+ struct drm_device *dev = intel_sdvo->base.base.dev;
+ struct drm_connector *connector, *tmp;
+
+ list_for_each_entry_safe(connector, tmp,
+ &dev->mode_config.connector_list, head) {
+ if (intel_attached_encoder(connector) == &intel_sdvo->base)
+ intel_sdvo_destroy(connector);
+ }
+}
+
static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
struct intel_sdvo_connector *intel_sdvo_connector,
int type)
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
SDVO_NAME(intel_sdvo));
- goto err;
+ /* Output_setup can leave behind connectors! */
+ goto err_output;
}
/* Only enable the hotplug irq if we need it, to work around noisy
/* Set the input timing to the screen. Assume always input 0. */
if (!intel_sdvo_set_target_input(intel_sdvo))
- goto err;
+ goto err_output;
if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
&intel_sdvo->pixel_clock_min,
&intel_sdvo->pixel_clock_max))
- goto err;
+ goto err_output;
DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
"clock range %dMHz - %dMHz, "
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
return true;
+err_output:
+ intel_sdvo_output_cleanup(intel_sdvo);
+
err:
drm_encoder_cleanup(&intel_encoder->base);
i2c_del_adapter(&intel_sdvo->ddc);
if (chan->vblank.crtc != crtc)
continue;
- if (nv_device(priv)->chipset == 0x50) {
- nv_wr32(priv, 0x001704, chan->vblank.channel);
- nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
- bar->flush(bar);
- nv_wr32(priv, 0x001570, chan->vblank.offset);
- nv_wr32(priv, 0x001574, chan->vblank.value);
- } else {
+ if (nv_device(priv)->chipset >= 0xc0) {
nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel);
bar->flush(bar);
nv_wr32(priv, 0x06000c,
nv_wr32(priv, 0x060010,
lower_32_bits(chan->vblank.offset));
nv_wr32(priv, 0x060014, chan->vblank.value);
+ } else {
+ nv_wr32(priv, 0x001704, chan->vblank.channel);
+ nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
+ bar->flush(bar);
+ if (nv_device(priv)->chipset == 0x50) {
+ nv_wr32(priv, 0x001570, chan->vblank.offset);
+ nv_wr32(priv, 0x001574, chan->vblank.value);
+ } else {
+ nv_wr32(priv, 0x060010, chan->vblank.offset);
+ nv_wr32(priv, 0x060014, chan->vblank.value);
+ }
}
list_del(&chan->vblank.head);
});
}
-void
+int
nv40_grctx_init(struct nouveau_device *device, u32 *size)
{
- u32 ctxprog[256], i;
+ u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i;
struct nouveau_grctx ctx = {
.device = device,
.mode = NOUVEAU_GRCTX_PROG,
.data = ctxprog,
- .ctxprog_max = ARRAY_SIZE(ctxprog)
+ .ctxprog_max = 256,
};
+ if (!ctxprog)
+ return -ENOMEM;
+
nv40_grctx_generate(&ctx);
nv_wr32(device, 0x400324, 0);
for (i = 0; i < ctx.ctxprog_len; i++)
nv_wr32(device, 0x400328, ctxprog[i]);
*size = ctx.ctxvals_pos * 4;
+
+ kfree(ctxprog);
+ return 0;
}
return ret;
/* generate and upload context program */
- nv40_grctx_init(nv_device(priv), &priv->size);
+ ret = nv40_grctx_init(nv_device(priv), &priv->size);
+ if (ret)
+ return ret;
/* No context present currently */
nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000);
return !(0x0baf & (1 << (device->chipset & 0x0f)));
}
-void nv40_grctx_init(struct nouveau_device *, u32 *size);
+int nv40_grctx_init(struct nouveau_device *, u32 *size);
void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *);
#endif
return temp;
}
-static inline bool
-nv_strncmp(void *obj, u32 addr, u32 len, const char *str)
+static inline int
+nv_memcmp(void *obj, u32 addr, const char *str, u32 len)
{
+ unsigned char c1, c2;
+
while (len--) {
- if (nv_ro08(obj, addr++) != *(str++))
- return false;
+ c1 = nv_ro08(obj, addr++);
+ c2 = *(str++);
+ if (c1 != c2)
+ return c1 - c2;
}
- return true;
+ return 0;
}
#endif
int clk, struct nouveau_pll_vals *);
int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1,
struct nouveau_pll_vals *);
-
+int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
+ int clk, struct nouveau_pll_vals *);
#endif
}
} else
if (*ver >= 0x15) {
- if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) {
+ if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) {
u16 i2c = nv_ro16(bios, dcb + 2);
*hdr = 4;
*cnt = (i2c - dcb) / 10;
return ret;
}
+int
+nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info,
+ int clk, struct nouveau_pll_vals *pv)
+{
+ int ret, N, M, P;
+
+ ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P);
+
+ if (ret > 0) {
+ pv->refclk = info->refclk;
+ pv->N1 = N;
+ pv->M1 = M;
+ pv->log2P = P;
+ }
+ return ret;
+}
+
+
static int
nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
struct nouveau_oclass *oclass, void *data, u32 size,
return ret;
priv->base.pll_set = nva3_clock_pll_set;
+ priv->base.pll_calc = nva3_clock_pll_calc;
return 0;
}
return ret;
priv->base.pll_set = nvc0_clock_pll_set;
+ priv->base.pll_calc = nva3_clock_pll_calc;
return 0;
}
if (unlikely(!abi16))
return -ENOMEM;
+
+ if (!drm->channel)
+ return nouveau_abi16_put(abi16, -ENODEV);
+
client = nv_client(abi16->client);
if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0)
/* initialise synchronisation routines */
if (device->card_type < NV_10) ret = nv04_fence_create(drm);
- else if (device->chipset < 0x84) ret = nv10_fence_create(drm);
+ else if (device->card_type < NV_50) ret = nv10_fence_create(drm);
+ else if (device->chipset < 0x84) ret = nv50_fence_create(drm);
else if (device->card_type < NV_C0) ret = nv84_fence_create(drm);
else ret = nvc0_fence_create(drm);
if (ret) {
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
/* some early dce3.2 boards have a bug in their transmitter control table */
- if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+ if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730))
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
}
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
break;
udelay(1);
}
+ } else {
+ save->crtc_enabled[i] = false;
}
}
/* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/
{ PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59,
PCI_VENDOR_ID_DELL, 0x00e3, 2},
- /* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */
+ /* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */
{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66,
PCI_VENDOR_ID_DELL, 0x0149, 1},
+ /* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */
+ { PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66,
+ PCI_VENDOR_ID_IBM, 0x0531, 1},
/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */
{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
0x1025, 0x0061, 1},
/* clear the pages coming from the pool if requested */
if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) {
list_for_each_entry(p, &plist, lru) {
- clear_page(page_address(p));
+ if (PageHighMem(p))
+ clear_highpage(p);
+ else
+ clear_page(page_address(p));
}
}
if (unlikely(to_page == NULL))
goto out_err;
- preempt_disable();
copy_highpage(to_page, from_page);
- preempt_enable();
page_cache_release(from_page);
}
ret = PTR_ERR(to_page);
goto out_err;
}
- preempt_disable();
copy_highpage(to_page, from_page);
- preempt_enable();
set_page_dirty(to_page);
mark_page_accessed(to_page);
page_cache_release(to_page);
memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
ret = copy_to_user(buffer, bounce, size);
+ if (ret)
+ ret = -EFAULT;
vfree(bounce);
if (unlikely(ret != 0))
rdesc[559] = 0x45;
}
/* the same as above (s/usage/physical/) */
- if ((quirks & MS_RDESC_3K) && *rsize == 106 &&
- !memcmp((char []){ 0x19, 0x00, 0x29, 0xff },
- &rdesc[94], 4)) {
+ if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 &&
+ rdesc[95] == 0x00 && rdesc[96] == 0x29 &&
+ rdesc[97] == 0xff) {
rdesc[94] = 0x35;
rdesc[96] = 0x45;
}
#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */
#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */
#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */
+#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */
#define AT91_TWI_SWRST 0x0080 /* Software Reset */
#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
INIT_COMPLETION(dev->cmd_complete);
dev->transfer_status = 0;
- if (dev->msg->flags & I2C_M_RD) {
+
+ if (!dev->buf_len) {
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else if (dev->msg->flags & I2C_M_RD) {
unsigned start_flags = AT91_TWI_START;
if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
select_init_dma_fail:
dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
select_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
/* Write failpath. */
write_init_dma_fail:
dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
write_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
}
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
int reg_shift; /* bit shift for I2C register addresses */
struct completion cmd_complete;
struct resource *ioarea;
- u32 latency; /* maximum MPU wkup latency */
- struct pm_qos_request pm_qos_request;
+ u32 latency; /* maximum mpu wkup latency */
+ void (*set_mpu_wkup_lat)(struct device *dev,
+ long latency);
u32 speed; /* Speed of bus in kHz */
u32 dtrev; /* extra revision from DT */
u32 flags;
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->threshold) /
+ (1000 * dev->speed / 8);
}
/*
dev->buf = msg->buf;
dev->buf_len = msg->len;
+ /* make sure writes to dev->buf_len are ordered */
+ barrier();
+
omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
/* Clear the FIFO Buffers */
*/
timeout = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
- dev->buf_len = 0;
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
if (r < 0)
goto out;
- /*
- * When waiting for completion of a i2c transfer, we need to
- * set a wake up latency constraint for the MPU. This is to
- * ensure quick enough wakeup from idle, when transfer
- * completes.
- */
- if (dev->latency)
- pm_qos_add_request(&dev->pm_qos_request,
- PM_QOS_CPU_DMA_LATENCY,
- dev->latency);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
break;
}
- if (dev->latency)
- pm_qos_remove_request(&dev->pm_qos_request);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, -1);
if (r == 0)
r = num;
} else if (pdata != NULL) {
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
+ dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
dev->dtrev = pdata->rev;
}
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->fifo_size) /
- (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->fifo_size) /
+ (1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
goto free_gpio;
}
+ i2c->gpios[idx] = gpio;
ret = gpio_request(gpio, "i2c-bus");
if (ret) {
#include <linux/irqflags.h>
#include <linux/rwsem.h>
#include <linux/pm_runtime.h>
+#include <linux/acpi.h>
#include <asm/uaccess.h>
#include "i2c-core.h"
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
client->dev.bus = &i2c_bus_type;
client->dev.type = &i2c_client_type;
client->dev.of_node = info->of_node;
+ ACPI_HANDLE_SET(&client->dev, info->acpi_node.handle);
/* For 10-bit clients, add an arbitrary offset to avoid collisions */
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
mux->busses = devm_kzalloc(&pdev->dev,
sizeof(mux->busses) * mux->pdata->bus_count,
GFP_KERNEL);
- if (!mux->states) {
+ if (!mux->busses) {
dev_err(&pdev->dev, "Cannot allocate busses\n");
ret = -ENOMEM;
goto err;
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/clockchips.h>
-#include <linux/hrtimer.h> /* ktime_get_real() */
#include <trace/events/power.h>
#include <linux/sched.h>
#include <linux/notifier.h>
static struct cpuidle_driver intel_idle_driver = {
.name = "intel_idle",
.owner = THIS_MODULE,
+ .en_core_tk_irqen = 1,
};
/* intel_idle.max_cstate=0 disables driver */
static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1;
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage);
unsigned int cstate;
- ktime_t kt_before, kt_after;
- s64 usec_delta;
int cpu = smp_processor_id();
cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
- kt_before = ktime_get_real();
-
stop_critical_timings();
if (!need_resched()) {
start_critical_timings();
- kt_after = ktime_get_real();
- usec_delta = ktime_to_us(ktime_sub(kt_after, kt_before));
-
- local_irq_enable();
-
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
- /* Update cpuidle counters */
- dev->last_residency = (int)usec_delta;
-
return index;
}
* input_mt_init_slots() - initialize MT input slots
* @dev: input device supporting MT events and finger tracking
* @num_slots: number of slots used by the device
+ * @flags: mt tasks to handle in core
*
* This function allocates all necessary memory for MT slot handling
* in the input device, prepares the ABS_MT_SLOT and
* ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * Depending on the flags set, it also performs pointer emulation and
+ * frame synchronization.
+ *
* May be called repeatedly. Returns -EINVAL if attempting to
* reinitialize with a different number of slots.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define MOUSEDEV_MINOR_BASE 32
-#define MOUSEDEV_MINORS 32
-#define MOUSEDEV_MIX 31
+#define MOUSEDEV_MINORS 31
+#define MOUSEDEV_MIX 63
#include <linux/sched.h>
#include <linux/slab.h>
static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
-static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+static int __devinit ads7846_setup_pendown(struct spi_device *spi,
+ struct ads7846 *ts)
{
struct ads7846_platform_data *pdata = spi->dev.platform_data;
int err;
ts->gpio_pendown = pdata->gpio_pendown;
+ if (pdata->gpio_pendown_debounce)
+ gpio_set_debounce(pdata->gpio_pendown,
+ pdata->gpio_pendown_debounce);
} else {
dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
return -EINVAL;
static int intel_iommu_add_device(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- struct pci_dev *bridge, *dma_pdev;
+ struct pci_dev *bridge, *dma_pdev = NULL;
struct iommu_group *group;
int ret;
dma_pdev = pci_get_domain_bus_and_slot(
pci_domain_nr(pdev->bus),
bridge->subordinate->number, 0);
- else
+ if (!dma_pdev)
dma_pdev = pci_dev_get(bridge);
} else
dma_pdev = pci_dev_get(pdev);
stats[i], val, offs);
}
seq_printf(s, "\n");
+ dput(dent);
return 0;
}
}
static struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
+ { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
+ { }
};
void __init bcm2835_init_irq(void)
struct led_trigger_cpu {
char name[MAX_NAME_LEN];
struct led_trigger *_trig;
- struct mutex lock;
- int lock_is_inited;
};
static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
{
struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig);
- /* mutex lock should be initialized before calling mutex_call() */
- if (!trig->lock_is_inited)
- return;
-
- mutex_lock(&trig->lock);
-
/* Locate the correct CPU LED */
switch (ledevt) {
case CPU_LED_IDLE_END:
/* Will leave the LED as it is */
break;
}
-
- mutex_unlock(&trig->lock);
}
EXPORT_SYMBOL(ledtrig_cpu);
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
- mutex_init(&trig->lock);
-
snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
- mutex_lock(&trig->lock);
led_trigger_register_simple(trig->name, &trig->_trig);
- trig->lock_is_inited = 1;
- mutex_unlock(&trig->lock);
}
register_syscore_ops(&ledtrig_cpu_syscore_ops);
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
- mutex_lock(&trig->lock);
-
led_trigger_unregister_simple(trig->_trig);
trig->_trig = NULL;
memset(trig->name, 0, MAX_NAME_LEN);
- trig->lock_is_inited = 0;
-
- mutex_unlock(&trig->lock);
- mutex_destroy(&trig->lock);
}
unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
if (!md_in_flight(md))
wake_up(&md->wait);
+ /*
+ * Run this off this callpath, as drivers could invoke end_io while
+ * inside their request_fn (and holding the queue lock). Calling
+ * back into ->request_fn() could deadlock attempting to grab the
+ * queue lock again.
+ */
if (run_queue)
- blk_run_queue(md->queue);
+ blk_run_queue_async(md->queue);
/*
* dm_put() must be at the end of this function. See the comment above
memset(bbp, 0xff, PAGE_SIZE);
for (i = 0 ; i < bb->count ; i++) {
- u64 internal_bb = *p++;
+ u64 internal_bb = p[i];
u64 store_bb = ((BB_OFFSET(internal_bb) << 10)
| BB_LEN(internal_bb));
- *bbp++ = cpu_to_le64(store_bb);
+ bbp[i] = cpu_to_le64(store_bb);
}
bb->changed = 0;
if (read_seqretry(&bb->lock, seq))
}
EXPORT_SYMBOL_GPL(md_stop_writes);
-void md_stop(struct mddev *mddev)
+static void __md_stop(struct mddev *mddev)
{
mddev->ready = 0;
mddev->pers->stop(mddev);
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+
+void md_stop(struct mddev *mddev)
+{
+ /* stop the array and free an attached data structures.
+ * This is called from dm-raid
+ */
+ __md_stop(mddev);
+ bitmap_destroy(mddev);
+ if (mddev->bio_set)
+ bioset_free(mddev->bio_set);
+}
+
EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
set_disk_ro(disk, 0);
__md_stop_writes(mddev);
- md_stop(mddev);
+ __md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
sector_t *first_bad, int *bad_sectors)
{
int hi;
- int lo = 0;
+ int lo;
u64 *p = bb->page;
- int rv = 0;
+ int rv;
sector_t target = s + sectors;
unsigned seq;
retry:
seq = read_seqbegin(&bb->lock);
-
+ lo = 0;
+ rv = 0;
hi = bb->count;
/* Binary search between lo and hi for 'target'
*/
one_write_done(r10_bio);
if (dec_rdev)
- rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
+ rdev_dec_pending(rdev, conf->mddev);
}
/*
blocked_rdev = rrdev;
break;
}
+ if (rdev && (test_bit(Faulty, &rdev->flags)
+ || test_bit(Unmerged, &rdev->flags)))
+ rdev = NULL;
if (rrdev && (test_bit(Faulty, &rrdev->flags)
|| test_bit(Unmerged, &rrdev->flags)))
rrdev = NULL;
r10_bio->devs[i].bio = NULL;
r10_bio->devs[i].repl_bio = NULL;
- if (!rdev || test_bit(Faulty, &rdev->flags) ||
- test_bit(Unmerged, &rdev->flags)) {
+
+ if (!rdev && !rrdev) {
set_bit(R10BIO_Degraded, &r10_bio->state);
continue;
}
- if (test_bit(WriteErrorSeen, &rdev->flags)) {
+ if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
sector_t first_bad;
sector_t dev_sector = r10_bio->devs[i].addr;
int bad_sectors;
max_sectors = good_sectors;
}
}
- r10_bio->devs[i].bio = bio;
- atomic_inc(&rdev->nr_pending);
+ if (rdev) {
+ r10_bio->devs[i].bio = bio;
+ atomic_inc(&rdev->nr_pending);
+ }
if (rrdev) {
r10_bio->devs[i].repl_bio = bio;
atomic_inc(&rrdev->nr_pending);
for (i = 0; i < conf->copies; i++) {
struct bio *mbio;
int d = r10_bio->devs[i].devnum;
- if (!r10_bio->devs[i].bio)
- continue;
+ if (r10_bio->devs[i].bio) {
+ struct md_rdev *rdev = conf->mirrors[d].rdev;
+ mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+ md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+ max_sectors);
+ r10_bio->devs[i].bio = mbio;
+
+ mbio->bi_sector = (r10_bio->devs[i].addr+
+ choose_data_offset(r10_bio,
+ rdev));
+ mbio->bi_bdev = rdev->bdev;
+ mbio->bi_end_io = raid10_end_write_request;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_private = r10_bio;
- mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
- md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
- max_sectors);
- r10_bio->devs[i].bio = mbio;
+ atomic_inc(&r10_bio->remaining);
- mbio->bi_sector = (r10_bio->devs[i].addr+
- choose_data_offset(r10_bio,
- conf->mirrors[d].rdev));
- mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
- mbio->bi_private = r10_bio;
+ cb = blk_check_plugged(raid10_unplug, mddev,
+ sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid10_plug_cb,
+ cb);
+ else
+ plug = NULL;
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!plug)
+ md_wakeup_thread(mddev->thread);
+ }
- atomic_inc(&r10_bio->remaining);
+ if (r10_bio->devs[i].repl_bio) {
+ struct md_rdev *rdev = conf->mirrors[d].replacement;
+ if (rdev == NULL) {
+ /* Replacement just got moved to main 'rdev' */
+ smp_mb();
+ rdev = conf->mirrors[d].rdev;
+ }
+ mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+ md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+ max_sectors);
+ r10_bio->devs[i].repl_bio = mbio;
+
+ mbio->bi_sector = (r10_bio->devs[i].addr +
+ choose_data_offset(
+ r10_bio, rdev));
+ mbio->bi_bdev = rdev->bdev;
+ mbio->bi_end_io = raid10_end_write_request;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_private = r10_bio;
- cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
- if (cb)
- plug = container_of(cb, struct raid10_plug_cb, cb);
- else
- plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
- if (plug) {
- bio_list_add(&plug->pending, mbio);
- plug->pending_cnt++;
- } else {
+ atomic_inc(&r10_bio->remaining);
+ spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
- md_wakeup_thread(mddev->thread);
-
- if (!r10_bio->devs[i].repl_bio)
- continue;
-
- mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
- md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
- max_sectors);
- r10_bio->devs[i].repl_bio = mbio;
-
- /* We are actively writing to the original device
- * so it cannot disappear, so the replacement cannot
- * become NULL here
- */
- mbio->bi_sector = (r10_bio->devs[i].addr +
- choose_data_offset(
- r10_bio,
- conf->mirrors[d].replacement));
- mbio->bi_bdev = conf->mirrors[d].replacement->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
- mbio->bi_private = r10_bio;
-
- atomic_inc(&r10_bio->remaining);
- spin_lock_irqsave(&conf->device_lock, flags);
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!mddev_check_plugged(mddev))
- md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
dev = &sh->dev[i];
if (!test_bit(R5_LOCKED, &dev->flags) &&
(test_bit(R5_UPTODATE, &dev->flags) ||
- test_and_clear_bit(R5_Discard, &dev->flags))) {
+ test_bit(R5_Discard, &dev->flags))) {
/* We can return any write requests */
struct bio *wbi, *wbi2;
pr_debug("Return write for disc %d\n", i);
+ if (test_and_clear_bit(R5_Discard, &dev->flags))
+ clear_bit(R5_UPTODATE, &dev->flags);
wbi = dev->written;
dev->written = NULL;
while (wbi && wbi->bi_sector <
!test_bit(STRIPE_DEGRADED, &sh->state),
0);
}
- }
+ } else if (test_bit(R5_Discard, &sh->dev[i].flags))
+ clear_bit(R5_Discard, &sh->dev[i].flags);
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
handle_failed_sync(conf, sh, &s);
}
- /*
- * might be able to return some write requests if the parity blocks
- * are safe, or on a failed drive
- */
- pdev = &sh->dev[sh->pd_idx];
- s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
- || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
- qdev = &sh->dev[sh->qd_idx];
- s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
- || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
- || conf->level < 6;
-
- if (s.written &&
- (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
- && !test_bit(R5_LOCKED, &pdev->flags)
- && (test_bit(R5_UPTODATE, &pdev->flags) ||
- test_bit(R5_Discard, &pdev->flags))))) &&
- (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
- && !test_bit(R5_LOCKED, &qdev->flags)
- && (test_bit(R5_UPTODATE, &qdev->flags) ||
- test_bit(R5_Discard, &qdev->flags))))))
- handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
-
- /* Now we might consider reading some blocks, either to check/generate
- * parity, or to satisfy requests
- * or to load a block that is being partially written.
- */
- if (s.to_read || s.non_overwrite
- || (conf->level == 6 && s.to_write && s.failed)
- || (s.syncing && (s.uptodate + s.compute < disks))
- || s.replacing
- || s.expanding)
- handle_stripe_fill(sh, &s, disks);
-
/* Now we check to see if any write operations have recently
* completed
*/
s.dec_preread_active = 1;
}
+ /*
+ * might be able to return some write requests if the parity blocks
+ * are safe, or on a failed drive
+ */
+ pdev = &sh->dev[sh->pd_idx];
+ s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
+ || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
+ qdev = &sh->dev[sh->qd_idx];
+ s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
+ || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
+ || conf->level < 6;
+
+ if (s.written &&
+ (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
+ && !test_bit(R5_LOCKED, &pdev->flags)
+ && (test_bit(R5_UPTODATE, &pdev->flags) ||
+ test_bit(R5_Discard, &pdev->flags))))) &&
+ (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
+ && !test_bit(R5_LOCKED, &qdev->flags)
+ && (test_bit(R5_UPTODATE, &qdev->flags) ||
+ test_bit(R5_Discard, &qdev->flags))))))
+ handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
+
+ /* Now we might consider reading some blocks, either to check/generate
+ * parity, or to satisfy requests
+ * or to load a block that is being partially written.
+ */
+ if (s.to_read || s.non_overwrite
+ || (conf->level == 6 && s.to_write && s.failed)
+ || (s.syncing && (s.uptodate + s.compute < disks))
+ || s.replacing
+ || s.expanding)
+ handle_stripe_fill(sh, &s, disks);
+
/* Now to consider new write requests and what else, if anything
* should be read. We do not handle new writes when:
* 1/ A 'write' operation (copy+xor) is already in flight.
* discard data disk but write parity disk
*/
stripe = stripe * PAGE_SIZE;
+ /* Round up to power of 2, as discard handling
+ * currently assumes that */
+ while ((stripe-1) & stripe)
+ stripe = (stripe | (stripe-1)) + 1;
mddev->queue->limits.discard_alignment = stripe;
mddev->queue->limits.discard_granularity = stripe;
/*
If unsure, say Y.
+config MMC_SDHCI_ACPI
+ tristate "SDHCI support for ACPI enumerated SDHCI controllers"
+ depends on MMC_SDHCI && ACPI
+ help
+ This selects support for ACPI enumerated SDHCI controllers,
+ identified by ACPI Compatibility ID PNP0D40 or specific
+ ACPI Hardware IDs.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_PLTFM
tristate "SDHCI platform and OF driver helper"
depends on MMC_SDHCI
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
+obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
--- /dev/null
+/*
+ * Secure Digital Host Controller Interface ACPI driver.
+ *
+ * Copyright (c) 2012, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/compiler.h>
+#include <linux/stddef.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/acpi.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/pm.h>
+#include <linux/mmc/sdhci.h>
+
+#include "sdhci.h"
+
+enum {
+ SDHCI_ACPI_SD_CD = BIT(0),
+ SDHCI_ACPI_RUNTIME_PM = BIT(1),
+};
+
+struct sdhci_acpi_chip {
+ const struct sdhci_ops *ops;
+ unsigned int quirks;
+ unsigned int quirks2;
+ unsigned long caps;
+ unsigned int caps2;
+ mmc_pm_flag_t pm_caps;
+};
+
+struct sdhci_acpi_slot {
+ const struct sdhci_acpi_chip *chip;
+ unsigned int quirks;
+ unsigned int quirks2;
+ unsigned long caps;
+ unsigned int caps2;
+ mmc_pm_flag_t pm_caps;
+ unsigned int flags;
+};
+
+struct sdhci_acpi_host {
+ struct sdhci_host *host;
+ const struct sdhci_acpi_slot *slot;
+ struct platform_device *pdev;
+ bool use_runtime_pm;
+};
+
+static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
+{
+ return c->slot && (c->slot->flags & flag);
+}
+
+static int sdhci_acpi_enable_dma(struct sdhci_host *host)
+{
+ return 0;
+}
+
+static const struct sdhci_ops sdhci_acpi_ops_dflt = {
+ .enable_dma = sdhci_acpi_enable_dma,
+};
+
+static const struct acpi_device_id sdhci_acpi_ids[] = {
+ { "PNP0D40" },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
+
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid)
+{
+ const struct acpi_device_id *id;
+
+ for (id = sdhci_acpi_ids; id->id[0]; id++)
+ if (!strcmp(id->id, hid))
+ return (const struct sdhci_acpi_slot *)id->driver_data;
+ return NULL;
+}
+
+static int __devinit sdhci_acpi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct acpi_device *device;
+ struct sdhci_acpi_host *c;
+ struct sdhci_host *host;
+ struct resource *iomem;
+ resource_size_t len;
+ const char *hid;
+ int err;
+
+ if (acpi_bus_get_device(handle, &device))
+ return -ENODEV;
+
+ if (acpi_bus_get_status(device) || !device->status.present)
+ return -ENODEV;
+
+ hid = acpi_device_hid(device);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem)
+ return -ENOMEM;
+
+ len = resource_size(iomem);
+ if (len < 0x100)
+ dev_err(dev, "Invalid iomem size!\n");
+
+ if (!devm_request_mem_region(dev, iomem->start, len, dev_name(dev)))
+ return -ENOMEM;
+
+ host = sdhci_alloc_host(dev, sizeof(struct sdhci_acpi_host));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ c = sdhci_priv(host);
+ c->host = host;
+ c->slot = sdhci_acpi_get_slot(hid);
+ c->pdev = pdev;
+ c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM);
+
+ platform_set_drvdata(pdev, c);
+
+ host->hw_name = "ACPI";
+ host->ops = &sdhci_acpi_ops_dflt;
+ host->irq = platform_get_irq(pdev, 0);
+
+ host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
+ resource_size(iomem));
+ if (host->ioaddr == NULL) {
+ err = -ENOMEM;
+ goto err_free;
+ }
+
+ if (!dev->dma_mask) {
+ u64 dma_mask;
+
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
+ /* 64-bit DMA is not supported at present */
+ dma_mask = DMA_BIT_MASK(32);
+ } else {
+ dma_mask = DMA_BIT_MASK(32);
+ }
+
+ dev->dma_mask = &dev->coherent_dma_mask;
+ dev->coherent_dma_mask = dma_mask;
+ }
+
+ if (c->slot) {
+ if (c->slot->chip) {
+ host->ops = c->slot->chip->ops;
+ host->quirks |= c->slot->chip->quirks;
+ host->quirks2 |= c->slot->chip->quirks2;
+ host->mmc->caps |= c->slot->chip->caps;
+ host->mmc->caps2 |= c->slot->chip->caps2;
+ host->mmc->pm_caps |= c->slot->chip->pm_caps;
+ }
+ host->quirks |= c->slot->quirks;
+ host->quirks2 |= c->slot->quirks2;
+ host->mmc->caps |= c->slot->caps;
+ host->mmc->caps2 |= c->slot->caps2;
+ host->mmc->pm_caps |= c->slot->pm_caps;
+ }
+
+ err = sdhci_add_host(host);
+ if (err)
+ goto err_free;
+
+ if (c->use_runtime_pm) {
+ pm_suspend_ignore_children(dev, 1);
+ pm_runtime_set_autosuspend_delay(dev, 50);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_enable(dev);
+ }
+
+ return 0;
+
+err_free:
+ platform_set_drvdata(pdev, NULL);
+ sdhci_free_host(c->host);
+ return err;
+}
+
+static int __devexit sdhci_acpi_remove(struct platform_device *pdev)
+{
+ struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ int dead;
+
+ if (c->use_runtime_pm) {
+ pm_runtime_get_sync(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+ }
+
+ dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
+ sdhci_remove_host(c->host, dead);
+ platform_set_drvdata(pdev, NULL);
+ sdhci_free_host(c->host);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int sdhci_acpi_suspend(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_suspend_host(c->host);
+}
+
+static int sdhci_acpi_resume(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_resume_host(c->host);
+}
+
+#else
+
+#define sdhci_acpi_suspend NULL
+#define sdhci_acpi_resume NULL
+
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int sdhci_acpi_runtime_suspend(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_runtime_suspend_host(c->host);
+}
+
+static int sdhci_acpi_runtime_resume(struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+
+ return sdhci_runtime_resume_host(c->host);
+}
+
+static int sdhci_acpi_runtime_idle(struct device *dev)
+{
+ return 0;
+}
+
+#else
+
+#define sdhci_acpi_runtime_suspend NULL
+#define sdhci_acpi_runtime_resume NULL
+#define sdhci_acpi_runtime_idle NULL
+
+#endif
+
+static const struct dev_pm_ops sdhci_acpi_pm_ops = {
+ .suspend = sdhci_acpi_suspend,
+ .resume = sdhci_acpi_resume,
+ .runtime_suspend = sdhci_acpi_runtime_suspend,
+ .runtime_resume = sdhci_acpi_runtime_resume,
+ .runtime_idle = sdhci_acpi_runtime_idle,
+};
+
+static struct platform_driver sdhci_acpi_driver = {
+ .driver = {
+ .name = "sdhci-acpi",
+ .owner = THIS_MODULE,
+ .acpi_match_table = sdhci_acpi_ids,
+ .pm = &sdhci_acpi_pm_ops,
+ },
+ .probe = sdhci_acpi_probe,
+ .remove = __devexit_p(sdhci_acpi_remove),
+};
+
+module_platform_driver(sdhci_acpi_driver);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface ACPI driver");
+MODULE_AUTHOR("Adrian Hunter");
+MODULE_LICENSE("GPL v2");
if (*(szlength) != '+') {
devlength = simple_strtoul(szlength, &buffer, 0);
- devlength = handle_unit(devlength, buffer) - devstart;
+ devlength = handle_unit(devlength, buffer);
if (devlength < devstart)
goto err_out;
/*
* Field definitions are in the following datasheets:
* Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * New style (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
* Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
*
- * Check for ID length, cell type, and Hynix/Samsung ID to decide what
- * to do.
+ * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+ * ID to decide what to do.
*/
- if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) {
+ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ id_data[5] != 0x00) {
/* Calc pagesize */
mtd->writesize = 2048 << (extid & 0x03);
extid >>= 2;
if (!flctl->qos_request) {
ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos, 100);
+ &flctl->pm_qos,
+ DEV_PM_QOS_LATENCY,
+ 100);
if (ret < 0)
dev_err(&flctl->pdev->dev,
"PM QoS request failed: %d\n", ret);
nr_parts = plen / sizeof(part[0]);
*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
- if (!pparts)
+ if (!*pparts)
return -ENOMEM;
names = of_get_property(dp, "partition-names", &plen);
* flexonenand_set_boundary - Writes the SLC boundary
* @param mtd - mtd info structure
*/
-int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
int boundary, int lock)
{
struct onenand_chip *this = mtd->priv;
struct net_device *bond_dev = bond->dev;
netdev_features_t vlan_features = BOND_VLAN_FEATURES;
unsigned short max_hard_header_len = ETH_HLEN;
+ unsigned int gso_max_size = GSO_MAX_SIZE;
+ u16 gso_max_segs = GSO_MAX_SEGS;
int i;
unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
dst_release_flag &= slave->dev->priv_flags;
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
+
+ gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
+ gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
}
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hard_header_len = max_hard_header_len;
+ bond_dev->gso_max_segs = gso_max_segs;
+ netif_set_gso_max_size(bond_dev, gso_max_size);
flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE;
bond_dev->priv_flags = flags | dst_release_flag;
dev->irq = irq[this_dev];
dev->mem_end = bad[this_dev];
}
+ SET_NETDEV_DEV(dev, &pdev->dev);
err = do_ne_probe(dev);
if (err) {
free_netdev(dev);
*/
static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp)
{
- u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
- if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
- BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
- REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp));
+ if (!CHIP_IS_E1x(bp)) {
+ u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
+ BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
+ REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+ 1 << BP_FUNC(bp));
+ }
}
}
jme_clear_pm(jme);
JME_NAPI_ENABLE(jme);
- tasklet_enable(&jme->linkch_task);
- tasklet_enable(&jme->txclean_task);
- tasklet_hi_enable(&jme->rxclean_task);
- tasklet_hi_enable(&jme->rxempty_task);
+ tasklet_init(&jme->linkch_task, jme_link_change_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet,
+ (unsigned long) jme);
rc = jme_request_irq(jme);
if (rc)
tasklet_init(&jme->pcc_task,
jme_pcc_tasklet,
(unsigned long) jme);
- tasklet_init(&jme->linkch_task,
- jme_link_change_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->txclean_task,
- jme_tx_clean_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->rxclean_task,
- jme_rx_clean_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->rxempty_task,
- jme_rx_empty_tasklet,
- (unsigned long) jme);
- tasklet_disable_nosync(&jme->linkch_task);
- tasklet_disable_nosync(&jme->txclean_task);
- tasklet_disable_nosync(&jme->rxclean_task);
- tasklet_disable_nosync(&jme->rxempty_task);
jme->dpi.cur = PCC_P1;
jme->reg_ghc = 0;
rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
if (rc)
return rc;
- tasklet_enable(&hw_priv->rx_tasklet);
- tasklet_enable(&hw_priv->tx_tasklet);
+ tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+ (unsigned long) hw_priv);
+ tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+ (unsigned long) hw_priv);
hw->promiscuous = 0;
hw->all_multi = 0;
spin_lock_init(&hw_priv->hwlock);
mutex_init(&hw_priv->lock);
- /* tasklet is enabled. */
- tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
- (unsigned long) hw_priv);
- tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
- (unsigned long) hw_priv);
-
- /* tasklet_enable will decrement the atomic counter. */
- tasklet_disable(&hw_priv->rx_tasklet);
- tasklet_disable(&hw_priv->tx_tasklet);
-
for (i = 0; i < TOTAL_PORT_NUM; i++)
init_waitqueue_head(&hw_priv->counter[i].counter);
cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
- cpw32_f(HiTxRingAddr, 0);
- cpw32_f(HiTxRingAddr + 4, 0);
-
- ring_dma = cp->ring_dma;
- cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
-
- ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
- cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
-
cp_start_hw(cp);
cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
cpw8(Config5, cpr8(Config5) & PMEStatus);
+ cpw32_f(HiTxRingAddr, 0);
+ cpw32_f(HiTxRingAddr + 4, 0);
+
+ ring_dma = cp->ring_dma;
+ cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+ ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
+ cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
+
cpw16(MultiIntr, 0);
cpw8_f(Cfg9346, Cfg9346_Lock);
netif_start_queue(net_dev);
/* Workaround for EDB */
- sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+ sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
static int __devinit smsc911x_init(struct net_device *dev)
{
struct smsc911x_data *pdata = netdev_priv(dev);
- unsigned int byte_test;
+ unsigned int byte_test, mask;
unsigned int to = 100;
SMSC_TRACE(pdata, probe, "Driver Parameters:");
/*
* poll the READY bit in PMT_CTRL. Any other access to the device is
* forbidden while this bit isn't set. Try for 100ms
+ *
+ * Note that this test is done before the WORD_SWAP register is
+ * programmed. So in some configurations the READY bit is at 16 before
+ * WORD_SWAP is written to. This issue is worked around by waiting
+ * until either bit 0 or bit 16 gets set in PMT_CTRL.
+ *
+ * SMSC has confirmed that checking bit 16 (marked as reserved in
+ * the datasheet) is fine since these bits "will either never be set
+ * or can only go high after READY does (so also indicate the device
+ * is ready)".
*/
- while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+
+ mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
+ while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
udelay(1000);
+
if (to == 0) {
pr_err("Device not READY in 100ms aborting\n");
return -ENODEV;
ingress_irq = rc;
tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
- 0, NULL, NULL);
+ 0, "tile_net", NULL);
if (rc != 0) {
netdev_err(dev, "request_irq failed: %d\n", rc);
destroy_irq(ingress_irq);
return IRQ_HANDLED;
}
+static void axienet_dma_err_handler(unsigned long data);
+
/**
* axienet_open - Driver open routine.
* @ndev: Pointer to net_device structure
phy_start(lp->phy_dev);
}
+ /* Enable tasklets for Axi DMA error handling */
+ tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
+ (unsigned long) lp);
+
/* Enable interrupts for Axi DMA Tx */
ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev);
if (ret)
ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev);
if (ret)
goto err_rx_irq;
- /* Enable tasklets for Axi DMA error handling */
- tasklet_enable(&lp->dma_err_tasklet);
+
return 0;
err_rx_irq:
if (lp->phy_dev)
phy_disconnect(lp->phy_dev);
lp->phy_dev = NULL;
+ tasklet_kill(&lp->dma_err_tasklet);
dev_err(lp->dev, "request_irq() failed\n");
return ret;
}
goto err_iounmap_2;
}
- tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
- (unsigned long) lp);
- tasklet_disable(&lp->dma_err_tasklet);
-
return 0;
err_iounmap_2:
{
int i;
- if (!ports_open)
- if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
- POOL_ALLOC_SIZE, 32, 0)))
+ if (!ports_open) {
+ dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ POOL_ALLOC_SIZE, 32, 0);
+ if (!dma_pool)
return -ENOMEM;
+ }
if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
&port->desc_tab_phys)))
break;
case SIRDEV_STATE_DONGLE_SPEED:
- if (dev->dongle_drv->reset) {
+ if (dev->dongle_drv->set_speed) {
ret = dev->dongle_drv->set_speed(dev, fsm->param);
if (ret < 0) {
fsm->result = ret;
struct mdiobb_ctrl *ctrl = bus->priv;
module_put(ctrl->ops->owner);
- mdiobus_unregister(bus);
mdiobus_free(bus);
}
EXPORT_SYMBOL(free_mdio_bitbang);
{
struct mdio_gpio_platform_data *pdata;
struct mii_bus *new_bus;
- int ret;
+ int ret, bus_id;
- if (pdev->dev.of_node)
+ if (pdev->dev.of_node) {
pdata = mdio_gpio_of_get_data(pdev);
- else
+ bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio");
+ } else {
pdata = pdev->dev.platform_data;
+ bus_id = pdev->id;
+ }
if (!pdata)
return -ENODEV;
- new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id);
if (!new_bus)
return -ENODEV;
if (last) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
- ret = team_dev_queue_xmit(team, last,
- skb2);
+ ret = !team_dev_queue_xmit(team, last,
+ skb2);
if (!sum_ret)
sum_ret = ret;
}
}
}
if (last) {
- ret = team_dev_queue_xmit(team, last, skb);
+ ret = !team_dev_queue_xmit(team, last, skb);
if (!sum_ret)
sum_ret = ret;
}
(ctx->ether_desc == NULL) || (ctx->control != intf))
goto error;
- /* claim interfaces, if any */
- temp = usb_driver_claim_interface(driver, ctx->data, dev);
- if (temp)
- goto error;
+ /* claim data interface, if different from control */
+ if (ctx->data != ctx->control) {
+ temp = usb_driver_claim_interface(driver, ctx->data, dev);
+ if (temp)
+ goto error;
+ }
iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
tasklet_kill(&ctx->bh);
+ /* handle devices with combined control and data interface */
+ if (ctx->control == ctx->data)
+ ctx->data = NULL;
+
/* disconnect master --> disconnect slave */
if (intf == ctx->control && ctx->data) {
usb_set_intfdata(ctx->data, NULL);
.driver_info = (unsigned long) &wwan_info,
},
+ /* Huawei NCM devices disguised as vendor specific */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
+ .driver_info = (unsigned long)&wwan_info,
+ },
+ { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
+ .driver_info = (unsigned long)&wwan_info,
+ },
+
/* Generic CDC-NCM devices */
{ USB_INTERFACE_INFO(USB_CLASS_COMM,
USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
- addr = (phy_id << 11) | (idx << 6) | MII_READ_;
+ addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
check_warn_goto_done(ret, "Error writing MII_ADDR");
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
- addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
+ addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
check_warn_goto_done(ret, "Error writing MII_ADDR");
/*
- * VXLAN: Virtual eXtensiable Local Area Network
+ * VXLAN: Virtual eXtensible Local Area Network
*
* Copyright (c) 2012 Vyatta Inc.
*
#define VXLAN_N_VID (1u << 24)
#define VXLAN_VID_MASK (VXLAN_N_VID - 1)
-/* VLAN + IP header + UDP + VXLAN */
-#define VXLAN_HEADROOM (4 + 20 + 8 + 8)
+/* IP header + UDP + VXLAN + Ethernet header */
+#define VXLAN_HEADROOM (20 + 8 + 8 + 14)
#define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */
if (!tb[IFLA_MTU])
dev->mtu = lowerdev->mtu - VXLAN_HEADROOM;
+
+ /* update header length based on lower device */
+ dev->hard_header_len = lowerdev->hard_header_len +
+ VXLAN_HEADROOM;
}
if (data[IFLA_VXLAN_TOS])
{
int i;
- if (!ports_open)
- if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
- POOL_ALLOC_SIZE, 32, 0)))
+ if (!ports_open) {
+ dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ POOL_ALLOC_SIZE, 32, 0);
+ if (!dma_pool)
return -ENOMEM;
+ }
if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
&port->desc_tab_phys)))
switch (type) {
case ATH9K_RESET_POWER_ON:
ret = ath9k_hw_set_reset_power_on(ah);
- if (!ret)
+ if (ret)
ah->reset_power_on = true;
break;
case ATH9K_RESET_WARM:
static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
{
-#ifndef CONFIG_BRCMFISCAN
+#ifndef CONFIG_BRCMISCAN
/* scheduled scan settings */
wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
if (iwlagn_tx_skb(priv, control->sta, skb))
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(hw, skb);
}
static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
vif_priv->ctx = ctx;
ctx->vif = vif;
+ /*
+ * In SNIFFER device type, the firmware reports the FCS to
+ * the host, rather than snipping it off. Unfortunately,
+ * mac80211 doesn't (yet) provide a per-packet flag for
+ * this, so that we have to set the hardware flag based
+ * on the interfaces added. As the monitor interface can
+ * only be present by itself, and will be removed before
+ * other interfaces are added, this is safe.
+ */
+ if (vif->type == NL80211_IFTYPE_MONITOR)
+ priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
+ else
+ priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
+
err = iwl_setup_interface(priv, ctx);
if (!err || reset)
goto out;
info = IEEE80211_SKB_CB(skb);
iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(priv->hw, skb);
}
static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
dma_map_page(trans->dev, page, 0,
PAGE_SIZE << trans_pcie->rx_page_order,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+ rxb->page = NULL;
+ spin_lock_irqsave(&rxq->lock, flags);
+ list_add(&rxb->list, &rxq->rx_used);
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, trans_pcie->rx_page_order);
+ return;
+ }
/* dma address must be no more than 36 bits */
BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
/* and also 256 byte aligned! */
dma_map_page(trans->dev, rxb->page, 0,
PAGE_SIZE << trans_pcie->rx_page_order,
DMA_FROM_DEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
+ if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+ /*
+ * free the page(s) as well to not break
+ * the invariant that the items on the used
+ * list have no page(s)
+ */
+ __free_pages(rxb->page, trans_pcie->rx_page_order);
+ rxb->page = NULL;
+ list_add_tail(&rxb->list, &rxq->rx_used);
+ } else {
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ }
} else
list_add_tail(&rxb->list, &rxq->rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
- u16 rd_ptr, wr_ptr;
- int n_bd = trans_pcie->txq[txq_id].q.n_bd;
if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) {
WARN_ONCE(1, "queue %d not used", txq_id);
return;
}
- rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1);
- wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id));
-
- WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]",
- txq_id, rd_ptr, wr_ptr);
-
iwl_txq_set_inactive(trans, txq_id);
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
}
return;
}
cmd_node = adapter->curr_cmd;
- if (cmd_node->wait_q_enabled)
- adapter->cmd_wait_q.status = -ETIMEDOUT;
-
if (cmd_node) {
adapter->dbg.timeout_cmd_id =
adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index];
dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n",
adapter->ps_mode, adapter->ps_state);
+
+ if (cmd_node->wait_q_enabled) {
+ adapter->cmd_wait_q.status = -ETIMEDOUT;
+ wake_up_interruptible(&adapter->cmd_wait_q.wait);
+ mwifiex_cancel_pending_ioctl(adapter);
+ /* reset cmd_sent flag to unblock new commands */
+ adapter->cmd_sent = false;
+ }
}
if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING)
mwifiex_init_fw_complete(adapter);
struct sdio_mmc_card *card;
struct mwifiex_adapter *adapter;
mmc_pm_flag_t pm_flag = 0;
- int hs_actived = 0;
int i;
int ret = 0;
adapter = card->adapter;
/* Enable the Host Sleep */
- hs_actived = mwifiex_enable_hs(adapter);
- if (hs_actived) {
- pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n");
- ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (!mwifiex_enable_hs(adapter)) {
+ dev_err(adapter->dev, "cmd: failed to suspend\n");
+ return -EFAULT;
}
+ dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n");
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
/* Indicate device suspended */
adapter->is_suspended = true;
/*=== Customer ID ===*/
/****** 8188CU ********/
{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
+ {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/
{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
/* Grant backend access to each skb fragment page. */
for (i = 0; i < frags; i++) {
skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+ struct page *page = skb_frag_page(frag);
- tx->flags |= XEN_NETTXF_more_data;
+ len = skb_frag_size(frag);
+ offset = frag->page_offset;
- id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
- np->tx_skbs[id].skb = skb_get(skb);
- tx = RING_GET_REQUEST(&np->tx, prod++);
- tx->id = id;
- ref = gnttab_claim_grant_reference(&np->gref_tx_head);
- BUG_ON((signed short)ref < 0);
+ /* Data must not cross a page boundary. */
+ BUG_ON(len + offset > PAGE_SIZE<<compound_order(page));
- mfn = pfn_to_mfn(page_to_pfn(skb_frag_page(frag)));
- gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
- mfn, GNTMAP_readonly);
+ /* Skip unused frames from start of page */
+ page += offset >> PAGE_SHIFT;
+ offset &= ~PAGE_MASK;
- tx->gref = np->grant_tx_ref[id] = ref;
- tx->offset = frag->page_offset;
- tx->size = skb_frag_size(frag);
- tx->flags = 0;
+ while (len > 0) {
+ unsigned long bytes;
+
+ BUG_ON(offset >= PAGE_SIZE);
+
+ bytes = PAGE_SIZE - offset;
+ if (bytes > len)
+ bytes = len;
+
+ tx->flags |= XEN_NETTXF_more_data;
+
+ id = get_id_from_freelist(&np->tx_skb_freelist,
+ np->tx_skbs);
+ np->tx_skbs[id].skb = skb_get(skb);
+ tx = RING_GET_REQUEST(&np->tx, prod++);
+ tx->id = id;
+ ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+ BUG_ON((signed short)ref < 0);
+
+ mfn = pfn_to_mfn(page_to_pfn(page));
+ gnttab_grant_foreign_access_ref(ref,
+ np->xbdev->otherend_id,
+ mfn, GNTMAP_readonly);
+
+ tx->gref = np->grant_tx_ref[id] = ref;
+ tx->offset = offset;
+ tx->size = bytes;
+ tx->flags = 0;
+
+ offset += bytes;
+ len -= bytes;
+
+ /* Next frame */
+ if (offset == PAGE_SIZE && len) {
+ BUG_ON(!PageCompound(page));
+ page++;
+ offset = 0;
+ }
+ }
}
np->tx.req_prod_pvt = prod;
}
+/*
+ * Count how many ring slots are required to send the frags of this
+ * skb. Each frag might be a compound page.
+ */
+static int xennet_count_skb_frag_slots(struct sk_buff *skb)
+{
+ int i, frags = skb_shinfo(skb)->nr_frags;
+ int pages = 0;
+
+ for (i = 0; i < frags; i++) {
+ skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+ unsigned long size = skb_frag_size(frag);
+ unsigned long offset = frag->page_offset;
+
+ /* Skip unused frames from start of page */
+ offset &= ~PAGE_MASK;
+
+ pages += PFN_UP(offset + size);
+ }
+
+ return pages;
+}
+
static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned short id;
grant_ref_t ref;
unsigned long mfn;
int notify;
- int frags = skb_shinfo(skb)->nr_frags;
+ int slots;
unsigned int offset = offset_in_page(data);
unsigned int len = skb_headlen(skb);
unsigned long flags;
- frags += DIV_ROUND_UP(offset + len, PAGE_SIZE);
- if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
- printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n",
- frags);
- dump_stack();
+ slots = DIV_ROUND_UP(offset + len, PAGE_SIZE) +
+ xennet_count_skb_frag_slots(skb);
+ if (unlikely(slots > MAX_SKB_FRAGS + 1)) {
+ net_alert_ratelimited(
+ "xennet: skb rides the rocket: %d slots\n", slots);
goto drop;
}
spin_lock_irqsave(&np->tx_lock, flags);
if (unlikely(!netif_carrier_ok(dev) ||
- (frags > 1 && !xennet_can_sg(dev)) ||
+ (slots > 1 && !xennet_can_sg(dev)) ||
netif_needs_gso(skb, netif_skb_features(skb)))) {
spin_unlock_irqrestore(&np->tx_lock, flags);
goto drop;
cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue);
+ list_del(&cmd->queue);
+
mutex_unlock(&dev->cmd_lock);
__pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame,
cmd->in_frame_len, cmd->cmd_complete,
cmd->arg, cmd->flags);
- list_del(&cmd->queue);
kfree(cmd);
}
static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
u8 *params, int params_len)
{
- struct pn533_cmd_jump_dep *cmd;
struct pn533_cmd_jump_dep_response *resp;
struct nfc_target nfc_target;
u8 target_gt_len;
int rc;
+ struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg;
+ u8 active = cmd->active;
+
+ kfree(arg);
if (params_len == -ENOENT) {
nfc_dev_dbg(&dev->interface->dev, "");
}
resp = (struct pn533_cmd_jump_dep_response *) params;
- cmd = (struct pn533_cmd_jump_dep *) arg;
rc = resp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
nfc_dev_err(&dev->interface->dev,
if (rc == 0)
rc = nfc_dep_link_is_up(dev->nfc_dev,
dev->nfc_dev->targets[0].idx,
- !cmd->active, NFC_RF_INITIATOR);
+ !active, NFC_RF_INITIATOR);
return 0;
}
rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame,
dev->in_maxlen, pn533_in_dep_link_up_complete,
cmd, GFP_KERNEL);
- if (rc)
- goto out;
-
-
-out:
- kfree(cmd);
+ if (rc < 0)
+ kfree(cmd);
return rc;
}
static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
u8 *params, int params_len)
{
+ struct sk_buff *skb_out = arg;
+
nfc_dev_dbg(&dev->interface->dev, "%s", __func__);
+ dev_kfree_skb(skb_out);
+
if (params_len < 0) {
nfc_dev_err(&dev->interface->dev,
"Error %d when sending data",
rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame,
dev->in_maxlen, pn533_tm_send_complete,
- NULL, GFP_KERNEL);
+ skb, GFP_KERNEL);
if (rc) {
nfc_dev_err(&dev->interface->dev,
"Error %d when trying to send data", rc);
#include <linux/pci-acpi.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_qos.h>
#include "pci.h"
-static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
-
/**
* pci_acpi_wake_bus - Wake-up notification handler for root buses.
* @handle: ACPI handle of a device the notification is for.
pci_pme_wakeup_bus(pci_dev->subordinate);
}
-/**
- * add_pm_notifier - Register PM notifier for given ACPI device.
- * @dev: ACPI device to add the notifier for.
- * @context: PCI device or bus to check for PME status if an event is signaled.
- *
- * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
- * PM wake-up events. For example, wake-up events may be generated for bridges
- * if one of the devices below the bridge is signaling PME, even if the bridge
- * itself doesn't have a wake-up GPE associated with it.
- */
-static acpi_status add_pm_notifier(struct acpi_device *dev,
- acpi_notify_handler handler,
- void *context)
-{
- acpi_status status = AE_ALREADY_EXISTS;
-
- mutex_lock(&pci_acpi_pm_notify_mtx);
-
- if (dev->wakeup.flags.notifier_present)
- goto out;
-
- status = acpi_install_notify_handler(dev->handle,
- ACPI_SYSTEM_NOTIFY,
- handler, context);
- if (ACPI_FAILURE(status))
- goto out;
-
- dev->wakeup.flags.notifier_present = true;
-
- out:
- mutex_unlock(&pci_acpi_pm_notify_mtx);
- return status;
-}
-
-/**
- * remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @dev: ACPI device to remove the notifier from.
- */
-static acpi_status remove_pm_notifier(struct acpi_device *dev,
- acpi_notify_handler handler)
-{
- acpi_status status = AE_BAD_PARAMETER;
-
- mutex_lock(&pci_acpi_pm_notify_mtx);
-
- if (!dev->wakeup.flags.notifier_present)
- goto out;
-
- status = acpi_remove_notify_handler(dev->handle,
- ACPI_SYSTEM_NOTIFY,
- handler);
- if (ACPI_FAILURE(status))
- goto out;
-
- dev->wakeup.flags.notifier_present = false;
-
- out:
- mutex_unlock(&pci_acpi_pm_notify_mtx);
- return status;
-}
-
/**
* pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
* @dev: ACPI device to add the notifier for.
acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
struct pci_bus *pci_bus)
{
- return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+ return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
}
/**
*/
acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
{
- return remove_pm_notifier(dev, pci_acpi_wake_bus);
+ return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus);
}
/**
acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
struct pci_dev *pci_dev)
{
- return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+ return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
}
/**
*/
acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
{
- return remove_pm_notifier(dev, pci_acpi_wake_dev);
+ return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev);
}
phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
return -ENODEV;
switch (state) {
+ case PCI_D3cold:
+ if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
+ PM_QOS_FLAGS_ALL) {
+ error = -EBUSY;
+ break;
+ }
case PCI_D0:
case PCI_D1:
case PCI_D2:
case PCI_D3hot:
- case PCI_D3cold:
error = acpi_bus_set_power(handle, state_conv[state]);
}
ports of 8 GPIO pins each.
config PINCTRL_SAMSUNG
- bool "Samsung pinctrl driver"
+ bool
depends on OF && GPIOLIB
select PINMUX
select PINCONF
void pnp_free_resource(struct pnp_resource *pnp_res);
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+ struct resource *res);
struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
int flags);
struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma,
char *pnpid;
struct acpi_hardware_id *id;
+ /* Skip devices that are already bound */
+ if (device->physical_node_count)
+ return 0;
+
/*
* If a PnPacpi device is not present , the device
* driver should not be loaded.
#include "../base.h"
#include "pnpacpi.h"
-#ifdef CONFIG_IA64
-#define valid_IRQ(i) (1)
-#else
-#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
-#endif
-
-/*
- * Allocated Resources
- */
-static int irq_flags(int triggering, int polarity, int shareable)
-{
- int flags;
-
- if (triggering == ACPI_LEVEL_SENSITIVE) {
- if (polarity == ACPI_ACTIVE_LOW)
- flags = IORESOURCE_IRQ_LOWLEVEL;
- else
- flags = IORESOURCE_IRQ_HIGHLEVEL;
- } else {
- if (polarity == ACPI_ACTIVE_LOW)
- flags = IORESOURCE_IRQ_LOWEDGE;
- else
- flags = IORESOURCE_IRQ_HIGHEDGE;
- }
-
- if (shareable == ACPI_SHARED)
- flags |= IORESOURCE_IRQ_SHAREABLE;
-
- return flags;
-}
-
static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
int *polarity, int *shareable)
{
*shareable = ACPI_EXCLUSIVE;
}
-static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
- u32 gsi, int triggering,
- int polarity, int shareable)
-{
- int irq, flags;
- int p, t;
-
- if (!valid_IRQ(gsi)) {
- pnp_add_irq_resource(dev, gsi, IORESOURCE_DISABLED);
- return;
- }
-
- /*
- * in IO-APIC mode, use overrided attribute. Two reasons:
- * 1. BIOS bug in DSDT
- * 2. BIOS uses IO-APIC mode Interrupt Source Override
- */
- if (!acpi_get_override_irq(gsi, &t, &p)) {
- t = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
- p = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
- if (triggering != t || polarity != p) {
- dev_warn(&dev->dev, "IRQ %d override to %s, %s\n",
- gsi, t ? "edge":"level", p ? "low":"high");
- triggering = t;
- polarity = p;
- }
- }
-
- flags = irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
- if (irq >= 0)
- pcibios_penalize_isa_irq(irq, 1);
- else
- flags |= IORESOURCE_DISABLED;
-
- pnp_add_irq_resource(dev, irq, flags);
-}
-
static int dma_flags(struct pnp_dev *dev, int type, int bus_master,
int transfer)
{
return flags;
}
-static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start,
- u64 len, int io_decode,
- int window)
-{
- int flags = 0;
- u64 end = start + len - 1;
+/*
+ * Allocated Resources
+ */
- if (io_decode == ACPI_DECODE_16)
- flags |= IORESOURCE_IO_16BIT_ADDR;
- if (len == 0 || end >= 0x10003)
- flags |= IORESOURCE_DISABLED;
- if (window)
- flags |= IORESOURCE_WINDOW;
+static void pnpacpi_add_irqresource(struct pnp_dev *dev, struct resource *r)
+{
+ if (!(r->flags & IORESOURCE_DISABLED))
+ pcibios_penalize_isa_irq(r->start, 1);
- pnp_add_io_resource(dev, start, end, flags);
+ pnp_add_resource(dev, r);
}
/*
}
}
-static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev,
- u64 start, u64 len,
- int write_protect, int window)
-{
- int flags = 0;
- u64 end = start + len - 1;
-
- if (len == 0)
- flags |= IORESOURCE_DISABLED;
- if (write_protect == ACPI_READ_WRITE_MEMORY)
- flags |= IORESOURCE_MEM_WRITEABLE;
- if (window)
- flags |= IORESOURCE_WINDOW;
-
- pnp_add_mem_resource(dev, start, end, flags);
-}
-
-static void pnpacpi_parse_allocated_busresource(struct pnp_dev *dev,
- u64 start, u64 len)
-{
- u64 end = start + len - 1;
-
- pnp_add_bus_resource(dev, start, end);
-}
-
-static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
- struct acpi_resource *res)
-{
- struct acpi_resource_address64 addr, *p = &addr;
- acpi_status status;
- int window;
- u64 len;
-
- status = acpi_resource_to_address64(res, p);
- if (!ACPI_SUCCESS(status)) {
- dev_warn(&dev->dev, "failed to convert resource type %d\n",
- res->type);
- return;
- }
-
- /* Windows apparently computes length rather than using _LEN */
- len = p->maximum - p->minimum + 1;
- window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
- if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
- p->info.mem.write_protect, window);
- else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
- p->granularity == 0xfff ? ACPI_DECODE_10 :
- ACPI_DECODE_16, window);
- else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
-static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
- struct acpi_resource *res)
-{
- struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
- int window;
- u64 len;
-
- /* Windows apparently computes length rather than using _LEN */
- len = p->maximum - p->minimum + 1;
- window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
-
- if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
- p->info.mem.write_protect, window);
- else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
- p->granularity == 0xfff ? ACPI_DECODE_10 :
- ACPI_DECODE_16, window);
- else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
-}
-
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
void *data)
{
struct pnp_dev *dev = data;
- struct acpi_resource_irq *irq;
struct acpi_resource_dma *dma;
- struct acpi_resource_io *io;
- struct acpi_resource_fixed_io *fixed_io;
struct acpi_resource_vendor_typed *vendor_typed;
- struct acpi_resource_memory24 *memory24;
- struct acpi_resource_memory32 *memory32;
- struct acpi_resource_fixed_memory32 *fixed_memory32;
- struct acpi_resource_extended_irq *extended_irq;
+ struct resource r;
int i, flags;
- switch (res->type) {
- case ACPI_RESOURCE_TYPE_IRQ:
- /*
- * Per spec, only one interrupt per descriptor is allowed in
- * _CRS, but some firmware violates this, so parse them all.
- */
- irq = &res->data.irq;
- if (irq->interrupt_count == 0)
- pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
- else {
- for (i = 0; i < irq->interrupt_count; i++) {
- pnpacpi_parse_allocated_irqresource(dev,
- irq->interrupts[i],
- irq->triggering,
- irq->polarity,
- irq->sharable);
- }
+ if (acpi_dev_resource_memory(res, &r)
+ || acpi_dev_resource_io(res, &r)
+ || acpi_dev_resource_address_space(res, &r)
+ || acpi_dev_resource_ext_address_space(res, &r)) {
+ pnp_add_resource(dev, &r);
+ return AE_OK;
+ }
+ r.flags = 0;
+ if (acpi_dev_resource_interrupt(res, 0, &r)) {
+ pnpacpi_add_irqresource(dev, &r);
+ for (i = 1; acpi_dev_resource_interrupt(res, i, &r); i++)
+ pnpacpi_add_irqresource(dev, &r);
+
+ if (i > 1) {
/*
* The IRQ encoder puts a single interrupt in each
* descriptor, so if a _CRS descriptor has more than
* one interrupt, we won't be able to re-encode it.
*/
- if (pnp_can_write(dev) && irq->interrupt_count > 1) {
+ if (pnp_can_write(dev)) {
dev_warn(&dev->dev, "multiple interrupts in "
"_CRS descriptor; configuration can't "
"be changed\n");
dev->capabilities &= ~PNP_WRITE;
}
}
- break;
+ return AE_OK;
+ } else if (r.flags & IORESOURCE_DISABLED) {
+ pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
+ return AE_OK;
+ }
+ switch (res->type) {
case ACPI_RESOURCE_TYPE_DMA:
dma = &res->data.dma;
if (dma->channel_count > 0 && dma->channels[0] != (u8) -1)
pnp_add_dma_resource(dev, dma->channels[0], flags);
break;
- case ACPI_RESOURCE_TYPE_IO:
- io = &res->data.io;
- pnpacpi_parse_allocated_ioresource(dev,
- io->minimum,
- io->address_length,
- io->io_decode, 0);
- break;
-
case ACPI_RESOURCE_TYPE_START_DEPENDENT:
case ACPI_RESOURCE_TYPE_END_DEPENDENT:
break;
- case ACPI_RESOURCE_TYPE_FIXED_IO:
- fixed_io = &res->data.fixed_io;
- pnpacpi_parse_allocated_ioresource(dev,
- fixed_io->address,
- fixed_io->address_length,
- ACPI_DECODE_10, 0);
- break;
-
case ACPI_RESOURCE_TYPE_VENDOR:
vendor_typed = &res->data.vendor_typed;
pnpacpi_parse_allocated_vendor(dev, vendor_typed);
case ACPI_RESOURCE_TYPE_END_TAG:
break;
- case ACPI_RESOURCE_TYPE_MEMORY24:
- memory24 = &res->data.memory24;
- pnpacpi_parse_allocated_memresource(dev,
- memory24->minimum,
- memory24->address_length,
- memory24->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_MEMORY32:
- memory32 = &res->data.memory32;
- pnpacpi_parse_allocated_memresource(dev,
- memory32->minimum,
- memory32->address_length,
- memory32->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
- fixed_memory32 = &res->data.fixed_memory32;
- pnpacpi_parse_allocated_memresource(dev,
- fixed_memory32->address,
- fixed_memory32->address_length,
- fixed_memory32->write_protect, 0);
- break;
- case ACPI_RESOURCE_TYPE_ADDRESS16:
- case ACPI_RESOURCE_TYPE_ADDRESS32:
- case ACPI_RESOURCE_TYPE_ADDRESS64:
- pnpacpi_parse_allocated_address_space(dev, res);
- break;
-
- case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
- pnpacpi_parse_allocated_ext_address_space(dev, res);
- break;
-
- case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
- extended_irq = &res->data.extended_irq;
-
- if (extended_irq->interrupt_count == 0)
- pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
- else {
- for (i = 0; i < extended_irq->interrupt_count; i++) {
- pnpacpi_parse_allocated_irqresource(dev,
- extended_irq->interrupts[i],
- extended_irq->triggering,
- extended_irq->polarity,
- extended_irq->sharable);
- }
-
- /*
- * The IRQ encoder puts a single interrupt in each
- * descriptor, so if a _CRS descriptor has more than
- * one interrupt, we won't be able to re-encode it.
- */
- if (pnp_can_write(dev) &&
- extended_irq->interrupt_count > 1) {
- dev_warn(&dev->dev, "multiple interrupts in "
- "_CRS descriptor; configuration can't "
- "be changed\n");
- dev->capabilities &= ~PNP_WRITE;
- }
- }
- break;
-
case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
break;
if (p->interrupts[i])
__set_bit(p->interrupts[i], map.bits);
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
}
}
- flags = irq_flags(p->triggering, p->polarity, p->sharable);
+ flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->sharable);
pnp_register_irq_resource(dev, option_flags, &map, flags);
}
return pnp_res;
}
+struct pnp_resource *pnp_add_resource(struct pnp_dev *dev,
+ struct resource *res)
+{
+ struct pnp_resource *pnp_res;
+
+ pnp_res = pnp_new_resource(dev);
+ if (!pnp_res) {
+ dev_err(&dev->dev, "can't add resource %pR\n", res);
+ return NULL;
+ }
+
+ pnp_res->res = *res;
+ dev_dbg(&dev->dev, "%pR\n", res);
+ return pnp_res;
+}
+
struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq,
int flags)
{
/**
* rio_map_inb_region -- Map inbound memory region.
* @mport: Master port.
- * @lstart: physical address of memory region to be mapped
+ * @local: physical address of memory region to be mapped
* @rbase: RIO base address assigned to this window
* @size: Size of the memory region
* @rflags: Flags for mapping.
}
EXPORT_SYMBOL_GPL(regulator_get_exclusive);
-/**
- * regulator_put - "free" the regulator source
- * @regulator: regulator source
- *
- * Note: drivers must ensure that all regulator_enable calls made on this
- * regulator source are balanced by regulator_disable calls prior to calling
- * this function.
- */
-void regulator_put(struct regulator *regulator)
+/* Locks held by regulator_put() */
+static void _regulator_put(struct regulator *regulator)
{
struct regulator_dev *rdev;
if (regulator == NULL || IS_ERR(regulator))
return;
- mutex_lock(®ulator_list_mutex);
rdev = regulator->rdev;
debugfs_remove_recursive(regulator->debugfs);
rdev->exclusive = 0;
module_put(rdev->owner);
+}
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+ mutex_lock(®ulator_list_mutex);
+ _regulator_put(regulator);
mutex_unlock(®ulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
- return (min_uV >= ret && ret <= max_uV);
+ return (min_uV <= ret && ret <= max_uV);
else
return ret;
}
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
config->ena_gpio, ret);
- goto clean;
+ goto wash;
}
rdev->ena_gpio = config->ena_gpio;
scrub:
if (rdev->supply)
- regulator_put(rdev->supply);
+ _regulator_put(rdev->supply);
if (rdev->ena_gpio)
gpio_free(rdev->ena_gpio);
kfree(rdev->constraints);
+wash:
device_unregister(&rdev->dev);
/* device core frees rdev */
rdev = ERR_PTR(ret);
#define RAW3215_NR_CCWS 3
#define RAW3215_TIMEOUT HZ/10 /* time for delayed output */
-#define RAW3215_FIXED 1 /* 3215 console device is not be freed */
#define RAW3215_WORKING 4 /* set if a request is being worked on */
#define RAW3215_THROTTLED 8 /* set if reading is disabled */
#define RAW3215_STOPPED 16 /* set if writing is disabled */
struct tty_struct *tty;
tty = tty_port_tty_get(&raw->port);
- tty_wakeup(tty);
- tty_kref_put(tty);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
/*
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
- if (!(raw->port.flags & ASYNC_INITIALIZED) ||
- (raw->flags & RAW3215_FIXED))
+ if (!(raw->port.flags & ASYNC_INITIALIZED))
return;
/* Wait for outstanding requests, then free irq */
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
- raw->flags |= RAW3215_FIXED;
-
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
raw3215_free_info(raw);
QETH_DBF_TEXT(SETUP, 2, "qipasscb");
cmd = (struct qeth_ipa_cmd *) data;
+
+ switch (cmd->hdr.return_code) {
+ case IPA_RC_NOTSUPP:
+ case IPA_RC_L2_UNSUPPORTED_CMD:
+ QETH_DBF_TEXT(SETUP, 2, "ipaunsup");
+ card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS;
+ card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS;
+ return -0;
+ default:
+ if (cmd->hdr.return_code) {
+ QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled "
+ "rc=%d\n",
+ dev_name(&card->gdev->dev),
+ cmd->hdr.return_code);
+ return 0;
+ }
+ }
+
if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
- } else {
+ } else if (cmd->hdr.prot_version == QETH_PROT_IPV6) {
card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
- }
+ } else
+ QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected"
+ "\n", dev_name(&card->gdev->dev));
QETH_DBF_TEXT(SETUP, 2, "suppenbl");
QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported);
QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled);
QETH_DBF_TEXT(SETUP, 2, "doL2init");
QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card));
- rc = qeth_query_setadapterparms(card);
- if (rc) {
- QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
- "device %s: x%x\n", CARD_BUS_ID(card), rc);
+ if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) {
+ rc = qeth_query_setadapterparms(card);
+ if (rc) {
+ QETH_DBF_MESSAGE(2, "could not query adapter "
+ "parameters on device %s: x%x\n",
+ CARD_BUS_ID(card), rc);
+ }
}
if (card->info.type == QETH_CARD_TYPE_IQD ||
return -ERESTARTSYS;
}
rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]);
- if (!rc)
+ if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND))
rc = qeth_l2_send_setmac(card, addr->sa_data);
return rc ? -EINVAL : 0;
}
frame_index,
(void **)&frame_buffer);
- sci_controller_copy_sata_response(&ireq->stp.req,
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
frame_header,
frame_buffer);
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/async.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
}
EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
+/**
+ * scsi_report_opcode - Find out if a given command opcode is supported
+ * @sdev: scsi device to query
+ * @buffer: scratch buffer (must be at least 20 bytes long)
+ * @len: length of buffer
+ * @opcode: opcode for command to look up
+ *
+ * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
+ * opcode. Returns 0 if RSOC fails or if the command opcode is
+ * unsupported. Returns 1 if the device claims to support the command.
+ */
+int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+ unsigned int len, unsigned char opcode)
+{
+ unsigned char cmd[16];
+ struct scsi_sense_hdr sshdr;
+ int result;
+
+ if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
+ return 0;
+
+ memset(cmd, 0, 16);
+ cmd[0] = MAINTENANCE_IN;
+ cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
+ cmd[2] = 1; /* One command format */
+ cmd[3] = opcode;
+ put_unaligned_be32(len, &cmd[6]);
+ memset(buffer, 0, len);
+
+ result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
+ &sshdr, 30 * HZ, 3, NULL);
+
+ if (result && scsi_sense_valid(&sshdr) &&
+ sshdr.sense_key == ILLEGAL_REQUEST &&
+ (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
+ return 0;
+
+ if ((buffer[1] & 3) == 3) /* Command supported */
+ return 1;
+
+ return 0;
+}
+EXPORT_SYMBOL(scsi_report_opcode);
+
/**
* scsi_device_get - get an additional reference to a scsi_device
* @sdev: device to get a reference to
action = ACTION_FAIL;
error = -EILSEQ;
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- } else if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
- (cmd->cmnd[0] == UNMAP ||
- cmd->cmnd[0] == WRITE_SAME_16 ||
- cmd->cmnd[0] == WRITE_SAME)) {
- description = "Discard failure";
+ } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+ switch (cmd->cmnd[0]) {
+ case UNMAP:
+ description = "Discard failure";
+ break;
+ case WRITE_SAME:
+ case WRITE_SAME_16:
+ if (cmd->cmnd[1] & 0x8)
+ description = "Discard failure";
+ else
+ description =
+ "Write same failure";
+ break;
+ default:
+ description = "Invalid command failure";
+ break;
+ }
action = ACTION_FAIL;
error = -EREMOTEIO;
} else
#endif
static void sd_config_discard(struct scsi_disk *, unsigned int);
+static void sd_config_write_same(struct scsi_disk *);
static int sd_revalidate_disk(struct gendisk *);
static void sd_unlock_native_capacity(struct gendisk *disk);
static int sd_probe(struct device *);
return err ? err : count;
}
+static ssize_t
+sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
+}
+
+static ssize_t
+sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+ unsigned long max;
+ int err;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (sdp->type != TYPE_DISK)
+ return -EINVAL;
+
+ err = kstrtoul(buf, 10, &max);
+
+ if (err)
+ return err;
+
+ if (max == 0)
+ sdp->no_write_same = 1;
+ else if (max <= SD_MAX_WS16_BLOCKS)
+ sdkp->max_ws_blocks = max;
+
+ sd_config_write_same(sdkp);
+
+ return count;
+}
+
static struct device_attribute sd_disk_attrs[] = {
__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
sd_store_cache_type),
__ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
__ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
sd_store_provisioning_mode),
+ __ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR,
+ sd_show_write_same_blocks, sd_store_write_same_blocks),
__ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR,
sd_show_max_medium_access_timeouts,
sd_store_max_medium_access_timeouts),
return;
case SD_LBP_UNMAP:
- max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
+ max_blocks = min_not_zero(sdkp->max_unmap_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
break;
case SD_LBP_WS16:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
break;
case SD_LBP_WS10:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
break;
case SD_LBP_ZERO:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
q->limits.discard_zeroes_data = 1;
break;
}
}
/**
- * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
* @sdp: scsi device to operate one
* @rq: Request to prepare
*
* Will issue either UNMAP or WRITE SAME(16) depending on preference
* indicated by target device.
**/
-static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
+static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
{
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
- struct bio *bio = rq->bio;
- sector_t sector = bio->bi_sector;
- unsigned int nr_sectors = bio_sectors(bio);
+ sector_t sector = blk_rq_pos(rq);
+ unsigned int nr_sectors = blk_rq_sectors(rq);
+ unsigned int nr_bytes = blk_rq_bytes(rq);
unsigned int len;
int ret;
char *buf;
struct page *page;
- if (sdkp->device->sector_size == 4096) {
- sector >>= 3;
- nr_sectors >>= 3;
- }
-
+ sector >>= ilog2(sdp->sector_size) - 9;
+ nr_sectors >>= ilog2(sdp->sector_size) - 9;
rq->timeout = SD_TIMEOUT;
memset(rq->cmd, 0, rq->cmd_len);
blk_add_request_payload(rq, page, len);
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
rq->buffer = page_address(page);
+ rq->__data_len = nr_bytes;
out:
if (ret != BLKPREP_OK) {
return ret;
}
+static void sd_config_write_same(struct scsi_disk *sdkp)
+{
+ struct request_queue *q = sdkp->disk->queue;
+ unsigned int logical_block_size = sdkp->device->sector_size;
+ unsigned int blocks = 0;
+
+ if (sdkp->device->no_write_same) {
+ sdkp->max_ws_blocks = 0;
+ goto out;
+ }
+
+ /* Some devices can not handle block counts above 0xffff despite
+ * supporting WRITE SAME(16). Consequently we default to 64k
+ * blocks per I/O unless the device explicitly advertises a
+ * bigger limit.
+ */
+ if (sdkp->max_ws_blocks == 0)
+ sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS;
+
+ if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
+ blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
+ else
+ blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
+
+out:
+ blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9));
+}
+
+/**
+ * sd_setup_write_same_cmnd - write the same data to multiple blocks
+ * @sdp: scsi device to operate one
+ * @rq: Request to prepare
+ *
+ * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
+ * preference indicated by target device.
+ **/
+static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
+{
+ struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+ struct bio *bio = rq->bio;
+ sector_t sector = blk_rq_pos(rq);
+ unsigned int nr_sectors = blk_rq_sectors(rq);
+ unsigned int nr_bytes = blk_rq_bytes(rq);
+ int ret;
+
+ if (sdkp->device->no_write_same)
+ return BLKPREP_KILL;
+
+ BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size);
+
+ sector >>= ilog2(sdp->sector_size) - 9;
+ nr_sectors >>= ilog2(sdp->sector_size) - 9;
+
+ rq->__data_len = sdp->sector_size;
+ rq->timeout = SD_WRITE_SAME_TIMEOUT;
+ memset(rq->cmd, 0, rq->cmd_len);
+
+ if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
+ rq->cmd_len = 16;
+ rq->cmd[0] = WRITE_SAME_16;
+ put_unaligned_be64(sector, &rq->cmd[2]);
+ put_unaligned_be32(nr_sectors, &rq->cmd[10]);
+ } else {
+ rq->cmd_len = 10;
+ rq->cmd[0] = WRITE_SAME;
+ put_unaligned_be32(sector, &rq->cmd[2]);
+ put_unaligned_be16(nr_sectors, &rq->cmd[7]);
+ }
+
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ rq->__data_len = nr_bytes;
+
+ return ret;
+}
+
static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
{
rq->timeout = SD_FLUSH_TIMEOUT;
* block PC requests to make life easier.
*/
if (rq->cmd_flags & REQ_DISCARD) {
- ret = scsi_setup_discard_cmnd(sdp, rq);
+ ret = sd_setup_discard_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_flags & REQ_WRITE_SAME) {
+ ret = sd_setup_write_same_cmnd(sdp, rq);
goto out;
} else if (rq->cmd_flags & REQ_FLUSH) {
ret = scsi_setup_flush_cmnd(sdp, rq);
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
struct scsi_sense_hdr sshdr;
struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
+ struct request *req = SCpnt->request;
int sense_valid = 0;
int sense_deferred = 0;
unsigned char op = SCpnt->cmnd[0];
+ unsigned char unmap = SCpnt->cmnd[1] & 8;
- if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
- scsi_set_resid(SCpnt, 0);
+ if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
+ if (!result) {
+ good_bytes = blk_rq_bytes(req);
+ scsi_set_resid(SCpnt, 0);
+ } else {
+ good_bytes = 0;
+ scsi_set_resid(SCpnt, blk_rq_bytes(req));
+ }
+ }
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
good_bytes = sd_completed_bytes(SCpnt);
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
- (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
- sd_config_discard(sdkp, SD_LBP_DISABLE);
+ if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+ switch (op) {
+ case UNMAP:
+ sd_config_discard(sdkp, SD_LBP_DISABLE);
+ break;
+ case WRITE_SAME_16:
+ case WRITE_SAME:
+ if (unmap)
+ sd_config_discard(sdkp, SD_LBP_DISABLE);
+ else {
+ sdkp->device->no_write_same = 1;
+ sd_config_write_same(sdkp);
+
+ good_bytes = 0;
+ req->__data_len = blk_rq_bytes(req);
+ req->cmd_flags |= REQ_QUIET;
+ }
+ }
+ }
break;
default:
break;
if (buffer[3] == 0x3c) {
unsigned int lba_count, desc_count;
- sdkp->max_ws_blocks =
- (u32) min_not_zero(get_unaligned_be64(&buffer[36]),
- (u64)0xffffffff);
+ sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
if (!sdkp->lbpme)
goto out;
kfree(buffer);
}
+static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE,
+ WRITE_SAME_16))
+ sdkp->ws16 = 1;
+}
+
static int sd_try_extended_inquiry(struct scsi_device *sdp)
{
/*
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
+ sd_read_write_same(sdkp, buffer);
}
sdkp->first_scan = 0;
blk_queue_flush(sdkp->disk->queue, flush);
set_capacity(disk, sdkp->capacity);
+ sd_config_write_same(sdkp);
kfree(buffer);
out:
#define SD_TIMEOUT (30 * HZ)
#define SD_MOD_TIMEOUT (75 * HZ)
#define SD_FLUSH_TIMEOUT (60 * HZ)
+#define SD_WRITE_SAME_TIMEOUT (120 * HZ)
/*
* Number of allowed retries
SD_MEMPOOL_SIZE = 2, /* CDB pool size */
};
+enum {
+ SD_MAX_WS10_BLOCKS = 0xffff,
+ SD_MAX_WS16_BLOCKS = 0x7fffff,
+};
+
enum {
SD_LBP_FULL = 0, /* Full logical block provisioning */
SD_LBP_UNMAP, /* Use UNMAP command */
unsigned lbpws : 1;
unsigned lbpws10 : 1;
unsigned lbpvpd : 1;
+ unsigned ws16 : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
#define ANDROID_ALARM_WAIT _IO('a', 1)
#define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size)
-#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size)
-
/* Set alarm */
#define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec)
#define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec)
#define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec)
#define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0)))
#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4)
{
struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
- int temp_open_count;
if (!hp)
return;
return;
}
- temp_open_count = hp->port.count;
hp->port.count = 0;
spin_unlock_irqrestore(&hp->port.lock, flags);
tty_port_tty_set(&hp->port, NULL);
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
-
- while(temp_open_count) {
- --temp_open_count;
- tty_port_put(&hp->port);
- }
}
/*
static const struct spi_device_id max310x_id_table[] = {
{ "max3107", MAX310X_TYPE_MAX3107 },
{ "max3108", MAX310X_TYPE_MAX3108 },
+ { }
};
MODULE_DEVICE_TABLE(spi, max310x_id_table);
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
+ unsigned long flags;
irqreturn_t rc;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
+
if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
rc = IRQ_NONE;
else if (hcd->driver->irq(hcd) == IRQ_NONE)
else
rc = IRQ_HANDLED;
+ local_irq_restore(flags);
return rc;
}
EXPORT_SYMBOL_GPL(usb_hcd_irq);
int retval;
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
#include <linux/usb/ehci_def.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/kconfig.h>
#include <linux/kgdb.h>
#include <linux/kthread.h>
#include <asm/io.h>
return -ENODEV;
}
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
- return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
static int ehci_reset_port(int port)
{
u32 portsc;
.index = -1,
};
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
int dbgp_reset_prep(struct usb_hcd *hcd)
{
int ret = xen_dbgp_reset_prep(hcd);
}
EXPORT_SYMBOL_GPL(dbgp_reset_prep);
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
#ifdef CONFIG_KGDB
static char kgdbdbgp_buf[DBGP_MAX_PACKET];
goto err_put_hcd;
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret)
goto err_put_hcd;
goto err3;
}
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
fifo_count = musb_readw(epio, MUSB_RXCOUNT);
/*
- * use mode 1 only if we expect data of at least ep packet_sz
- * and have not yet received a short packet
+ * Enable Mode 1 on RX transfers only when short_not_ok flag
+ * is set. Currently short_not_ok flag is set only from
+ * file_storage and f_mass_storage drivers
*/
- if ((request->length - request->actual >= musb_ep->packet_sz) &&
- (fifo_count >= musb_ep->packet_sz))
+
+ if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
use_mode_1 = 1;
else
use_mode_1 = 0;
c = musb->dma_controller;
channel = musb_ep->dma;
+ /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+ * mode 0 only. So we do not get endpoint interrupts due to DMA
+ * completion. We only get interrupts from DMA controller.
+ *
+ * We could operate in DMA mode 1 if we knew the size of the tranfer
+ * in advance. For mass storage class, request->length = what the host
+ * sends, so that'd work. But for pretty much everything else,
+ * request->length is routinely more than what the host sends. For
+ * most these gadgets, end of is signified either by a short packet,
+ * or filling the last byte of the buffer. (Sending extra data in
+ * that last pckate should trigger an overflow fault.) But in mode 1,
+ * we don't get DMA completion interrupt for short packets.
+ *
+ * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+ * to get endpoint interrupt on every DMA req, but that didn't seem
+ * to work reliably.
+ *
+ * REVISIT an updated g_file_storage can set req->short_not_ok, which
+ * then becomes usable as a runtime "use mode 1" hint...
+ */
+
/* Experimental: Mode1 works with mass storage use cases */
if (use_mode_1) {
csr |= MUSB_RXCSR_AUTOCLEAR;
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
-
+ int musbid;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL4030
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
- depends on TWL4030_CORE && OMAP_USB2
+ depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL6030
static int keyspan_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct keyspan_port_private *s_priv;
+ struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
struct callbacks *cback;
if (!p_priv)
return -ENOMEM;
- s_priv = usb_get_serial_data(port->serial);
p_priv->device_details = d_details;
/* Setup values for the various callback routines */
#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_E362 0x9010
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181
#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182
+#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
+
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
#define KYOCERA_PRODUCT_KPC680 0x180a
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
+#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
struct usb_serial *serial = port->serial;
struct urb *urb;
- if (endpoint == -1)
- return NULL; /* endpoint not needed */
-
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dev_dbg(&serial->interface->dev,
init_usb_anchor(&portdata->delayed);
for (i = 0; i < N_IN_URB; i++) {
+ if (!port->bulk_in_size)
+ break;
+
buffer = (u8 *)__get_free_page(GFP_KERNEL);
if (!buffer)
goto bail_out_error;
}
for (i = 0; i < N_OUT_URB; i++) {
- if (port->bulk_out_endpointAddress == -1)
- continue;
+ if (!port->bulk_out_size)
+ break;
buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
if (!buffer)
/* Some devices don't handle VPD pages correctly */
sdev->skip_vpd_pages = 1;
+ /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
+ sdev->no_report_opcodes = 1;
+
+ /* Do not attempt to use WRITE SAME */
+ sdev->no_write_same = 1;
+
/* Some disks return the total number of blocks in response
* to READ CAPACITY rather than the highest block number.
* If this device makes that mistake, tell the sd driver. */
struct omap_dss_output *out;
enum omap_dss_output_id id;
- id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
+ switch (module) {
+ case 0:
+ id = OMAP_DSS_OUTPUT_DSI1;
+ break;
+ case 1:
+ id = OMAP_DSS_OUTPUT_DSI2;
+ break;
+ default:
+ return NULL;
+ }
out = omap_dss_get_output(id);
- return out->pdev;
+ return out ? out->pdev : NULL;
}
static inline void dsi_write_reg(struct platform_device *dsidev,
dss.dss_clk = clk;
- clk = clk_get(NULL, dss.feat->clk_name);
- if (IS_ERR(clk)) {
- DSSERR("Failed to get %s\n", dss.feat->clk_name);
- r = PTR_ERR(clk);
- goto err;
+ if (dss.feat->clk_name) {
+ clk = clk_get(NULL, dss.feat->clk_name);
+ if (IS_ERR(clk)) {
+ DSSERR("Failed to get %s\n", dss.feat->clk_name);
+ r = PTR_ERR(clk);
+ goto err;
+ }
+ } else {
+ clk = NULL;
}
dss.dpll4_m4_ck = clk;
if (cpu_is_omap24xx())
src = &omap24xx_dss_feats;
- else if (cpu_is_omap34xx())
- src = &omap34xx_dss_feats;
else if (cpu_is_omap3630())
src = &omap3630_dss_feats;
+ else if (cpu_is_omap34xx())
+ src = &omap34xx_dss_feats;
else if (cpu_is_omap44xx())
src = &omap44xx_dss_feats;
else if (soc_is_omap54xx())
{
mutex_lock(&hdmi.lock);
- if (hdmi_runtime_get())
+ if (hdmi_runtime_get()) {
+ mutex_unlock(&hdmi.lock);
return;
+ }
hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s);
hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s);
case OMAPFB_WAITFORVSYNC:
DBG("ioctl WAITFORVSYNC\n");
- if (!display && !display->output && !display->output->manager) {
+ if (!display || !display->output || !display->output->manager) {
r = -EINVAL;
break;
}
down_write(&mm->mmap_sem);
vma = find_vma(mm, m.addr);
- ret = -EINVAL;
if (!vma ||
vma->vm_ops != &privcmd_vm_ops ||
(m.addr != vma->vm_start) ||
((m.addr + (nr_pages << PAGE_SHIFT)) != vma->vm_end) ||
!privcmd_enforce_singleshot_mapping(vma)) {
up_write(&mm->mmap_sem);
+ ret = -EINVAL;
goto out;
}
up_write(&mm->mmap_sem);
- if (state.global_error && (version == 1)) {
- /* Write back errors in second pass. */
- state.user_mfn = (xen_pfn_t *)m.arr;
- state.err = err_array;
- ret = traverse_pages(m.num, sizeof(xen_pfn_t),
- &pagelist, mmap_return_errors_v1, &state);
+ if (version == 1) {
+ if (state.global_error) {
+ /* Write back errors in second pass. */
+ state.user_mfn = (xen_pfn_t *)m.arr;
+ state.err = err_array;
+ ret = traverse_pages(m.num, sizeof(xen_pfn_t),
+ &pagelist, mmap_return_errors_v1, &state);
+ } else
+ ret = 0;
+
} else if (version == 2) {
ret = __copy_to_user(m.err, err_array, m.num * sizeof(int));
if (ret)
end = start + (range->len >> sb->s_blocksize_bits) - 1;
minlen = range->minlen >> sb->s_blocksize_bits;
- if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)) ||
- unlikely(start >= max_blks))
+ if (minlen > EXT3_BLOCKS_PER_GROUP(sb) ||
+ start >= max_blks ||
+ range->len < sb->s_blocksize)
return -EINVAL;
if (end >= max_blks)
end = max_blks - 1;
struct fdtable *fdt;
/* exec unshares first */
- BUG_ON(atomic_read(&files->count) != 1);
spin_lock(&files->file_lock);
for (i = 0; ; i++) {
unsigned long set;
struct page *pg;
struct inode *inode = mapping->host;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
+ struct jffs2_raw_inode ri;
+ uint32_t alloc_len = 0;
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
uint32_t pageofs = index << PAGE_CACHE_SHIFT;
int ret = 0;
+ jffs2_dbg(1, "%s()\n", __func__);
+
+ if (pageofs > inode->i_size) {
+ ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
+ ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
+ if (ret)
+ return ret;
+ }
+
+ mutex_lock(&f->sem);
pg = grab_cache_page_write_begin(mapping, index, flags);
- if (!pg)
+ if (!pg) {
+ if (alloc_len)
+ jffs2_complete_reservation(c);
+ mutex_unlock(&f->sem);
return -ENOMEM;
+ }
*pagep = pg;
- jffs2_dbg(1, "%s()\n", __func__);
-
- if (pageofs > inode->i_size) {
+ if (alloc_len) {
/* Make new hole frag from old EOF to new page */
- struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
- struct jffs2_raw_inode ri;
struct jffs2_full_dnode *fn;
- uint32_t alloc_len;
jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
(unsigned int)inode->i_size, pageofs);
- ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
- ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
- if (ret)
- goto out_page;
-
- mutex_lock(&f->sem);
memset(&ri, 0, sizeof(ri));
ri.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
if (IS_ERR(fn)) {
ret = PTR_ERR(fn);
jffs2_complete_reservation(c);
- mutex_unlock(&f->sem);
goto out_page;
}
ret = jffs2_add_full_dnode_to_inode(c, f, fn);
jffs2_mark_node_obsolete(c, fn->raw);
jffs2_free_full_dnode(fn);
jffs2_complete_reservation(c);
- mutex_unlock(&f->sem);
goto out_page;
}
jffs2_complete_reservation(c);
inode->i_size = pageofs;
- mutex_unlock(&f->sem);
}
/*
* case of a short-copy.
*/
if (!PageUptodate(pg)) {
- mutex_lock(&f->sem);
ret = jffs2_do_readpage_nolock(inode, pg);
- mutex_unlock(&f->sem);
if (ret)
goto out_page;
}
+ mutex_unlock(&f->sem);
jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
return ret;
out_page:
unlock_page(pg);
page_cache_release(pg);
+ mutex_unlock(&f->sem);
return ret;
}
if (ret)
goto out_close_fd;
- fd_install(fd, f);
+ if (fd != FAN_NOFD)
+ fd_install(fd, f);
return fanotify_event_metadata.event_len;
out_close_fd:
.release = mem_release,
};
+static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
+ char buffer[PROC_NUMBUF];
+ int oom_adj = OOM_ADJUST_MIN;
+ size_t len;
+ unsigned long flags;
+
+ if (!task)
+ return -ESRCH;
+ if (lock_task_sighand(task, &flags)) {
+ if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MAX)
+ oom_adj = OOM_ADJUST_MAX;
+ else
+ oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) /
+ OOM_SCORE_ADJ_MAX;
+ unlock_task_sighand(task, &flags);
+ }
+ put_task_struct(task);
+ len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj);
+ return simple_read_from_buffer(buf, count, ppos, buffer, len);
+}
+
+static ssize_t oom_adj_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ char buffer[PROC_NUMBUF];
+ int oom_adj;
+ unsigned long flags;
+ int err;
+
+ memset(buffer, 0, sizeof(buffer));
+ if (count > sizeof(buffer) - 1)
+ count = sizeof(buffer) - 1;
+ if (copy_from_user(buffer, buf, count)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ err = kstrtoint(strstrip(buffer), 0, &oom_adj);
+ if (err)
+ goto out;
+ if ((oom_adj < OOM_ADJUST_MIN || oom_adj > OOM_ADJUST_MAX) &&
+ oom_adj != OOM_DISABLE) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ task = get_proc_task(file->f_path.dentry->d_inode);
+ if (!task) {
+ err = -ESRCH;
+ goto out;
+ }
+
+ task_lock(task);
+ if (!task->mm) {
+ err = -EINVAL;
+ goto err_task_lock;
+ }
+
+ if (!lock_task_sighand(task, &flags)) {
+ err = -ESRCH;
+ goto err_task_lock;
+ }
+
+ /*
+ * Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum
+ * value is always attainable.
+ */
+ if (oom_adj == OOM_ADJUST_MAX)
+ oom_adj = OOM_SCORE_ADJ_MAX;
+ else
+ oom_adj = (oom_adj * OOM_SCORE_ADJ_MAX) / -OOM_DISABLE;
+
+ if (oom_adj < task->signal->oom_score_adj &&
+ !capable(CAP_SYS_RESOURCE)) {
+ err = -EACCES;
+ goto err_sighand;
+ }
+
+ /*
+ * /proc/pid/oom_adj is provided for legacy purposes, ask users to use
+ * /proc/pid/oom_score_adj instead.
+ */
+ printk_once(KERN_WARNING "%s (%d): /proc/%d/oom_adj is deprecated, please use /proc/%d/oom_score_adj instead.\n",
+ current->comm, task_pid_nr(current), task_pid_nr(task),
+ task_pid_nr(task));
+
+ task->signal->oom_score_adj = oom_adj;
+ trace_oom_score_adj_update(task);
+err_sighand:
+ unlock_task_sighand(task, &flags);
+err_task_lock:
+ task_unlock(task);
+ put_task_struct(task);
+out:
+ return err < 0 ? err : count;
+}
+
+static const struct file_operations proc_oom_adj_operations = {
+ .read = oom_adj_read,
+ .write = oom_adj_write,
+ .llseek = generic_file_llseek,
+};
+
static ssize_t oom_score_adj_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
REG("cgroup", S_IRUGO, proc_cgroup_operations),
#endif
INF("oom_score", S_IRUGO, proc_oom_score),
+ REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
REG("cgroup", S_IRUGO, proc_cgroup_operations),
#endif
INF("oom_score", S_IRUGO, proc_oom_score),
+ REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
while (s < e) {
unsigned long flags;
+ u64 id;
if (c > psinfo->bufsize)
c = psinfo->bufsize;
spin_lock_irqsave(&psinfo->buf_lock, flags);
}
memcpy(psinfo->buf, s, c);
- psinfo->write(PSTORE_TYPE_CONSOLE, 0, NULL, 0, c, psinfo);
+ psinfo->write(PSTORE_TYPE_CONSOLE, 0, &id, 0, c, psinfo);
spin_unlock_irqrestore(&psinfo->buf_lock, flags);
s += c;
c = e - s;
BUG_ON(!th->t_trans_id);
- dquot_initialize(inode);
+ reiserfs_write_unlock(inode->i_sb);
err = dquot_alloc_inode(inode);
+ reiserfs_write_lock(inode->i_sb);
if (err)
goto out_end_trans;
if (!dir->i_nlink) {
out_end_trans:
journal_end(th, th->t_super, th->t_blocks_allocated);
+ reiserfs_write_unlock(inode->i_sb);
/* Drop can be outside and it needs more credits so it's better to have it outside */
dquot_drop(inode);
+ reiserfs_write_lock(inode->i_sb);
inode->i_flags |= S_NOQUOTA;
make_bad_inode(inode);
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
- depth = reiserfs_write_lock_once(inode->i_sb);
if (is_quota_modification(inode, attr))
dquot_initialize(inode);
-
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (attr->ia_valid & ATTR_SIZE) {
/* version 2 items will be caught by the s_maxbytes check
** done for us in vmtruncate
error = journal_begin(&th, inode->i_sb, jbegin_count);
if (error)
goto out;
+ reiserfs_write_unlock_once(inode->i_sb, depth);
error = dquot_transfer(inode, attr);
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (error) {
journal_end(&th, inode->i_sb, jbegin_count);
goto out;
key2type(&(key->on_disk_key)));
#endif
+ reiserfs_write_unlock(inode->i_sb);
retval = dquot_alloc_space_nodirty(inode, pasted_size);
+ reiserfs_write_lock(inode->i_sb);
if (retval) {
pathrelse(search_path);
return retval;
"reiserquota insert_item(): allocating %u id=%u type=%c",
quota_bytes, inode->i_uid, head2type(ih));
#endif
+ reiserfs_write_unlock(inode->i_sb);
/* We can't dirty inode here. It would be immediately written but
* appropriate stat item isn't inserted yet... */
retval = dquot_alloc_space_nodirty(inode, quota_bytes);
+ reiserfs_write_lock(inode->i_sb);
if (retval) {
pathrelse(path);
return retval;
retval = remove_save_link_only(s, &save_link_key, 0);
continue;
}
+ reiserfs_write_unlock(s);
dquot_initialize(inode);
+ reiserfs_write_lock(s);
if (truncate && S_ISDIR(inode->i_mode)) {
/* We got a truncate request for a dir which is impossible.
kfree(qf_names[i]);
#endif
err = -EINVAL;
- goto out_err;
+ goto out_unlock;
}
#ifdef CONFIG_QUOTA
handle_quota_files(s, qf_names, &qfmt);
if (blocks) {
err = reiserfs_resize(s, blocks);
if (err != 0)
- goto out_err;
+ goto out_unlock;
}
if (*mount_flags & MS_RDONLY) {
/* it is read-only already */
goto out_ok;
+ /*
+ * Drop write lock. Quota will retake it when needed and lock
+ * ordering requires calling dquot_suspend() without it.
+ */
+ reiserfs_write_unlock(s);
err = dquot_suspend(s, -1);
if (err < 0)
goto out_err;
+ reiserfs_write_lock(s);
/* try to remount file system with read-only permissions */
if (sb_umount_state(rs) == REISERFS_VALID_FS
err = journal_begin(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
/* Mounting a rw partition read-only. */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
if (reiserfs_is_journal_aborted(journal)) {
err = journal->j_errno;
- goto out_err;
+ goto out_unlock;
}
handle_data_mode(s, mount_options);
s->s_flags &= ~MS_RDONLY; /* now it is safe to call journal_begin */
err = journal_begin(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
/* Mount a partition which is read-only, read-write */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
SB_JOURNAL(s)->j_must_wait = 1;
err = journal_end(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
if (!(*mount_flags & MS_RDONLY)) {
+ /*
+ * Drop write lock. Quota will retake it when needed and lock
+ * ordering requires calling dquot_resume() without it.
+ */
+ reiserfs_write_unlock(s);
dquot_resume(s, -1);
+ reiserfs_write_lock(s);
finish_unfinished(s);
reiserfs_xattr_init(s, *mount_flags);
}
reiserfs_write_unlock(s);
return 0;
+out_unlock:
+ reiserfs_write_unlock(s);
out_err:
kfree(new_opts);
- reiserfs_write_unlock(s);
return err;
}
REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (ret)
goto out;
+ reiserfs_write_unlock(dquot->dq_sb);
ret = dquot_commit(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(dquot->dq_sb);
return ret;
}
REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (ret)
goto out;
+ reiserfs_write_unlock(dquot->dq_sb);
ret = dquot_acquire(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(dquot->dq_sb);
return ret;
}
ret =
journal_begin(&th, dquot->dq_sb,
REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
+ reiserfs_write_unlock(dquot->dq_sb);
if (ret) {
/* Release dquot anyway to avoid endless cycle in dqput() */
dquot_release(dquot);
goto out;
}
ret = dquot_release(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
reiserfs_write_unlock(dquot->dq_sb);
+out:
return ret;
}
ret = journal_begin(&th, sb, 2);
if (ret)
goto out;
+ reiserfs_write_unlock(sb);
ret = dquot_commit_info(sb, type);
+ reiserfs_write_lock(sb);
err = journal_end(&th, sb, 2);
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(sb);
return ret;
}
struct reiserfs_transaction_handle th;
int opt = type == USRQUOTA ? REISERFS_USRQUOTA : REISERFS_GRPQUOTA;
- if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt)))
- return -EINVAL;
+ reiserfs_write_lock(sb);
+ if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt))) {
+ err = -EINVAL;
+ goto out;
+ }
/* Quotafile not on the same filesystem? */
if (path->dentry->d_sb != sb) {
if (err)
goto out;
}
- err = dquot_quota_on(sb, type, format_id, path);
+ reiserfs_write_unlock(sb);
+ return dquot_quota_on(sb, type, format_id, path);
out:
+ reiserfs_write_unlock(sb);
return err;
}
tocopy = sb->s_blocksize - offset < towrite ?
sb->s_blocksize - offset : towrite;
tmp_bh.b_state = 0;
+ reiserfs_write_lock(sb);
err = reiserfs_get_block(inode, blk, &tmp_bh, GET_BLOCK_CREATE);
+ reiserfs_write_unlock(sb);
if (err)
goto out;
if (offset || tocopy != sb->s_blocksize)
flush_dcache_page(bh->b_page);
set_buffer_uptodate(bh);
unlock_buffer(bh);
+ reiserfs_write_lock(sb);
reiserfs_prepare_for_journal(sb, bh, 1);
journal_mark_dirty(current->journal_info, sb, bh);
if (!journal_quota)
reiserfs_add_ordered_list(inode, bh);
+ reiserfs_write_unlock(sb);
brelse(bh);
offset = 0;
towrite -= tocopy;
if (!lprops) {
lprops = ubifs_fast_find_freeable(c);
if (!lprops) {
- ubifs_assert(c->freeable_cnt == 0);
- if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+ /*
+ * The first condition means the following: go scan the
+ * LPT if there are uncategorized lprops, which means
+ * there may be freeable LEBs there (UBIFS does not
+ * store the information about freeable LEBs in the
+ * master node).
+ */
+ if (c->in_a_category_cnt != c->main_lebs ||
+ c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+ ubifs_assert(c->freeable_cnt == 0);
lprops = scan_for_leb_for_idx(c);
if (IS_ERR(lprops)) {
err = PTR_ERR(lprops);
default:
ubifs_assert(0);
}
+
lprops->flags &= ~LPROPS_CAT_MASK;
lprops->flags |= cat;
+ c->in_a_category_cnt += 1;
+ ubifs_assert(c->in_a_category_cnt <= c->main_lebs);
}
/**
default:
ubifs_assert(0);
}
+
+ c->in_a_category_cnt -= 1;
+ ubifs_assert(c->in_a_category_cnt >= 0);
}
/**
* @freeable_list: list of freeable non-index LEBs (free + dirty == @leb_size)
* @frdi_idx_list: list of freeable index LEBs (free + dirty == @leb_size)
* @freeable_cnt: number of freeable LEBs in @freeable_list
+ * @in_a_category_cnt: count of lprops which are in a certain category, which
+ * basically meants that they were loaded from the flash
*
* @ltab_lnum: LEB number of LPT's own lprops table
* @ltab_offs: offset of LPT's own lprops table
struct list_head freeable_list;
struct list_head frdi_idx_list;
int freeable_cnt;
+ int in_a_category_cnt;
int ltab_lnum;
int ltab_offs;
*
* The fix is two passes across the ioend list - one to start writeback on the
* buffer_heads, and then submit them for I/O on the second pass.
+ *
+ * If @fail is non-zero, it means that we have a situation where some part of
+ * the submission process has failed after we have marked paged for writeback
+ * and unlocked them. In this situation, we need to fail the ioend chain rather
+ * than submit it to IO. This typically only happens on a filesystem shutdown.
*/
STATIC void
xfs_submit_ioend(
struct writeback_control *wbc,
- xfs_ioend_t *ioend)
+ xfs_ioend_t *ioend,
+ int fail)
{
xfs_ioend_t *head = ioend;
xfs_ioend_t *next;
next = ioend->io_list;
bio = NULL;
+ /*
+ * If we are failing the IO now, just mark the ioend with an
+ * error and finish it. This will run IO completion immediately
+ * as there is only one reference to the ioend at this point in
+ * time.
+ */
+ if (fail) {
+ ioend->io_error = -fail;
+ xfs_finish_ioend(ioend);
+ continue;
+ }
+
for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) {
if (!bio) {
xfs_start_page_writeback(page, 1, count);
- if (ioend && imap_valid) {
+ /* if there is no IO to be submitted for this page, we are done */
+ if (!ioend)
+ return 0;
+
+ ASSERT(iohead);
+
+ /*
+ * Any errors from this point onwards need tobe reported through the IO
+ * completion path as we have marked the initial page as under writeback
+ * and unlocked it.
+ */
+ if (imap_valid) {
xfs_off_t end_index;
end_index = imap.br_startoff + imap.br_blockcount;
wbc, end_index);
}
- if (iohead) {
- /*
- * Reserve log space if we might write beyond the on-disk
- * inode size.
- */
- if (ioend->io_type != XFS_IO_UNWRITTEN &&
- xfs_ioend_is_append(ioend)) {
- err = xfs_setfilesize_trans_alloc(ioend);
- if (err)
- goto error;
- }
- xfs_submit_ioend(wbc, iohead);
- }
+ /*
+ * Reserve log space if we might write beyond the on-disk inode size.
+ */
+ err = 0;
+ if (ioend->io_type != XFS_IO_UNWRITTEN && xfs_ioend_is_append(ioend))
+ err = xfs_setfilesize_trans_alloc(ioend);
+
+ xfs_submit_ioend(wbc, iohead, err);
return 0;
leaf2 = blk2->bp->b_addr;
ASSERT(leaf1->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
ASSERT(leaf2->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
+ ASSERT(leaf2->hdr.count == 0);
args = state->args;
trace_xfs_attr_leaf_rebalance(args);
* I assert that since all callers pass in an empty
* second buffer, this code should never execute.
*/
+ ASSERT(0);
/*
* Figure the total bytes to be added to the destination leaf.
args->index2 = 0;
args->blkno2 = blk2->blkno;
} else {
+ /*
+ * On a double leaf split, the original attr location
+ * is already stored in blkno2/index2, so don't
+ * overwrite it overwise we corrupt the tree.
+ */
blk2->index = blk1->index
- be16_to_cpu(leaf1->hdr.count);
- args->index = args->index2 = blk2->index;
- args->blkno = args->blkno2 = blk2->blkno;
+ args->index = blk2->index;
+ args->blkno = blk2->blkno;
+ if (!state->extravalid) {
+ /*
+ * set the new attr location to match the old
+ * one and let the higher level split code
+ * decide where in the leaf to place it.
+ */
+ args->index2 = blk2->index;
+ args->blkno2 = blk2->blkno;
+ }
}
} else {
ASSERT(state->inleaf == 1);
{
xfs_buf_t *bp = (xfs_buf_t *)bio->bi_private;
- xfs_buf_ioerror(bp, -error);
+ /*
+ * don't overwrite existing errors - otherwise we can lose errors on
+ * buffers that require multiple bios to complete.
+ */
+ if (!bp->b_error)
+ xfs_buf_ioerror(bp, -error);
- if (!error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
+ if (!bp->b_error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
_xfs_buf_ioend(bp, 1);
if (size)
goto next_chunk;
} else {
+ /*
+ * This is guaranteed not to be the last io reference count
+ * because the caller (xfs_buf_iorequest) holds a count itself.
+ */
+ atomic_dec(&bp->b_io_remaining);
xfs_buf_ioerror(bp, EIO);
bio_put(bio);
}
*****************************************************************************/
#define ACPI_DEBUGGER_MAX_ARGS 8 /* Must be max method args + 1 */
+#define ACPI_DB_LINE_BUFFER_SIZE 512
#define ACPI_DEBUGGER_COMMAND_PROMPT '-'
#define ACPI_DEBUGGER_EXECUTE_PROMPT '%'
#define AE_CODE_TBL_MAX 0x0005
/*
- * AML exceptions. These are caused by problems with
+ * AML exceptions. These are caused by problems with
* the actual AML byte stream
*/
#define AE_AML_BAD_OPCODE (acpi_status) (0x0001 | AE_CODE_AML)
#define METHOD_NAME__HID "_HID"
#define METHOD_NAME__CID "_CID"
#define METHOD_NAME__UID "_UID"
+#define METHOD_NAME__SUB "_SUB"
#define METHOD_NAME__ADR "_ADR"
#define METHOD_NAME__INI "_INI"
#define METHOD_NAME__STA "_STA"
u32 bus_address:1;
u32 removable:1;
u32 ejectable:1;
- u32 lockable:1;
u32 suprise_removal_ok:1;
u32 power_manageable:1;
u32 performance_manageable:1;
u32 eject_pending:1;
- u32 reserved:23;
+ u32 reserved:24;
};
/* File System */
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
union acpi_object *str_obj; /* unicode string for _STR method */
+ unsigned long sun; /* _SUN */
};
#define acpi_device_bid(d) ((d)->pnp.bus_id)
struct acpi_device_power_state {
struct {
u8 valid:1;
+ u8 os_accessible:1;
u8 explicit_set:1; /* _PSx present? */
u8 reserved:6;
} flags;
unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_device_set_power(struct acpi_device *device, int state);
int acpi_bus_update_power(acpi_handle handle, int *state_p);
bool acpi_bus_power_manageable(acpi_handle handle);
bool acpi_bus_can_wakeup(acpi_handle handle);
int acpi_is_root_bridge(acpi_handle);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
-#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev))
int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
#ifdef CONFIG_PM
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler, void *context);
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+ u32 target_state, int d_max_in, int *d_min_p);
int acpi_pm_device_sleep_state(struct device *, int *, int);
#else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler,
+ void *context)
+{
+ return AE_SUPPORT;
+}
+static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+ acpi_notify_handler handler)
+{
+ return AE_SUPPORT;
+}
+static inline int __acpi_device_power_state(int m, int *p)
{
if (p)
*p = ACPI_STATE_D0;
return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
}
+static inline int acpi_device_power_state(struct device *dev,
+ struct acpi_device *adev,
+ u32 target_state, int d_max_in,
+ int *d_min_p)
+{
+ return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+ return __acpi_device_power_state(m, p);
+}
#endif
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_RUNTIME
+int __acpi_device_run_wake(struct acpi_device *, bool);
int acpi_pm_device_run_wake(struct device *, bool);
-int acpi_pm_device_sleep_wake(struct device *, bool);
#else
+static inline int __acpi_device_run_wake(struct acpi_device *adev, bool en)
+{
+ return -ENODEV;
+}
static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
{
return -ENODEV;
}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
+int acpi_pm_device_sleep_wake(struct device *, bool);
+#else
+static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
+ u32 target_state, bool enable)
+{
+ return -ENODEV;
+}
static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
{
return -ENODEV;
}
#endif
+#ifdef CONFIG_ACPI_SLEEP
+u32 acpi_target_system_state(void);
+#else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
+#endif
+
+static inline bool acpi_device_power_manageable(struct acpi_device *adev)
+{
+ return adev->flags.power_manageable;
+}
+
+static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
+{
+ return adev->wakeup.flags.valid;
+}
+
+static inline bool acpi_device_can_poweroff(struct acpi_device *adev)
+{
+ return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible;
+}
+
#else /* CONFIG_ACPI */
static inline int register_acpi_bus_type(void *bus) { return 0; }
-
/******************************************************************************
*
- * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL). These
+ * Name: acpiosxf.h - All interfaces to the OS Services Layer (OSL). These
* interfaces must be implemented by OSL to interface the
* ACPI components to the host operating system.
*
-
/******************************************************************************
*
* Name: acpixf.h - External interfaces to the ACPI subsystem
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120913
+#define ACPI_CA_VERSION 0x20121018
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
acpi_status
acpi_get_table_header(acpi_string signature,
- u32 instance,
- struct acpi_table_header *out_table_header);
+ u32 instance, struct acpi_table_header *out_table_header);
acpi_status
acpi_get_table_with_size(acpi_string signature,
u32 instance, struct acpi_table_header **out_table);
acpi_status
-acpi_get_table_by_index(u32 table_index,
- struct acpi_table_header **out_table);
+acpi_get_table_by_index(u32 table_index, struct acpi_table_header **out_table);
acpi_status
acpi_install_table_handler(acpi_tbl_handler handler, void *context);
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
acpi_install_global_event_handler
- (ACPI_GBL_EVENT_HANDLER handler, void *context))
+ (acpi_gbl_event_handler handler, void *context))
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status
acpi_install_fixed_event_handler(u32
u32 gpe_number,
acpi_gpe_handler
address))
-acpi_status
-acpi_install_notify_handler(acpi_handle device,
- u32 handler_type,
- acpi_notify_handler handler, void *context);
+acpi_status acpi_install_notify_handler(acpi_handle device, u32 handler_type,
+ acpi_notify_handler handler,
+ void *context);
acpi_status
acpi_remove_notify_handler(acpi_handle device,
******************************************************************************/
#define ACPI_MPST_CHANNEL_INFO \
- u16 reserved1; \
u8 channel_id; \
- u8 reserved2; \
- u16 power_node_count;
+ u8 reserved1[3]; \
+ u16 power_node_count; \
+ u16 reserved2;
/* Main table */
u32 length;
u64 range_address;
u64 range_length;
- u8 num_power_states;
- u8 num_physical_components;
- u16 reserved2;
+ u32 num_power_states;
+ u32 num_physical_components;
};
/* Values for Flags field above */
struct acpi_mpst_data_hdr {
u16 characteristics_count;
+ u16 reserved;
};
struct acpi_mpst_power_data {
- u8 revision;
+ u8 structure_id;
u8 flags;
u16 reserved1;
u32 average_power;
u32 signature;
u16 pcc_command;
u16 pcc_status;
- u16 command_register;
- u16 status_register;
- u16 power_state_id;
- u16 power_node_id;
+ u32 command_register;
+ u32 status_register;
+ u32 power_state_id;
+ u32 power_node_id;
u64 energy_consumed;
u64 average_power;
};
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
+/* Optimizations for 4-character (32-bit) acpi_name manipulation */
+
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b)))
+#define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src)))
#else
#define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE))
+#define ACPI_MOVE_NAME(dest,src) (ACPI_STRNCPY (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE))
#endif
/*******************************************************************************
/* Sleep function dispatch */
-typedef acpi_status(*ACPI_SLEEP_FUNCTION) (u8 sleep_state);
+typedef acpi_status(*acpi_sleep_function) (u8 sleep_state);
struct acpi_sleep_functions {
- ACPI_SLEEP_FUNCTION legacy_function;
- ACPI_SLEEP_FUNCTION extended_function;
+ acpi_sleep_function legacy_function;
+ acpi_sleep_function extended_function;
};
/*
/*
* Types specific to the OS service interfaces
*/
-typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
+typedef u32
+ (ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context);
typedef void
(ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context);
* Various handlers and callback procedures
*/
typedef
-void (*ACPI_GBL_EVENT_HANDLER) (u32 event_type,
+void (*acpi_gbl_event_handler) (u32 event_type,
acpi_handle device,
u32 event_number, void *context);
#define ACPI_EVENT_TYPE_GPE 0
#define ACPI_EVENT_TYPE_FIXED 1
-typedef u32(*acpi_event_handler) (void *context);
+typedef
+u32(*acpi_event_handler) (void *context);
typedef
u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context);
#define ACPI_UUID_LENGTH 16
-/* Structures used for device/processor HID, UID, CID */
+/* Structures used for device/processor HID, UID, CID, and SUB */
-struct acpica_device_id {
+struct acpi_pnp_device_id {
u32 length; /* Length of string + null */
char *string;
};
-struct acpica_device_id_list {
+struct acpi_pnp_device_id_list {
u32 count; /* Number of IDs in Ids array */
u32 list_size; /* Size of list, including ID strings */
- struct acpica_device_id ids[1]; /* ID array */
+ struct acpi_pnp_device_id ids[1]; /* ID array */
};
/*
u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
u32 current_status; /* _STA value */
u64 address; /* _ADR value */
- struct acpica_device_id hardware_id; /* _HID value */
- struct acpica_device_id unique_id; /* _UID value */
- struct acpica_device_id_list compatible_id_list; /* _CID list <must be last> */
+ struct acpi_pnp_device_id hardware_id; /* _HID value */
+ struct acpi_pnp_device_id unique_id; /* _UID value */
+ struct acpi_pnp_device_id subsystem_id; /* _SUB value */
+ struct acpi_pnp_device_id_list compatible_id_list; /* _CID list <must be last> */
};
/* Values for Flags field above (acpi_get_object_info) */
#define ACPI_VALID_ADR 0x02
#define ACPI_VALID_HID 0x04
#define ACPI_VALID_UID 0x08
-#define ACPI_VALID_CID 0x10
-#define ACPI_VALID_SXDS 0x20
-#define ACPI_VALID_SXWS 0x40
+#define ACPI_VALID_SUB 0x10
+#define ACPI_VALID_CID 0x20
+#define ACPI_VALID_SXDS 0x40
+#define ACPI_VALID_SXWS 0x80
-/* Flags for _STA method */
+/* Flags for _STA return value (current_status above) */
#define ACPI_STA_DEVICE_PRESENT 0x01
#define ACPI_STA_DEVICE_ENABLED 0x02
{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x679B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
+#include <linux/errno.h>
#include <linux/ioport.h> /* for struct resource */
+#include <linux/device.h>
#ifdef CONFIG_ACPI
#define PXM_INVAL (-1)
+bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res);
+bool acpi_dev_resource_address_space(struct acpi_resource *ares,
+ struct resource *res);
+bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
+ struct resource *res);
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable);
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+ struct resource *res);
+
+struct resource_list_entry {
+ struct list_head node;
+ struct resource res;
+};
+
+void acpi_dev_free_resource_list(struct list_head *list);
+int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
+ int (*preproc)(struct acpi_resource *, void *),
+ void *preproc_data);
+
int acpi_check_resource_conflict(const struct resource *res);
int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_resources_are_enforced(void);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_HIBERNATION
void __init acpi_no_s4_hw_signature(void);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
void __init acpi_old_suspend_ordering(void);
void __init acpi_nvs_nosave(void);
+void __init acpi_nvs_nosave_s3(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
void *data);
+const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
+ const struct device *dev);
+
+static inline bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ return !!acpi_match_device(drv->acpi_match_table, dev);
+}
+
+#define ACPI_PTR(_ptr) (_ptr)
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
return 0;
}
+struct acpi_device_id;
+
+static inline const struct acpi_device_id *acpi_match_device(
+ const struct acpi_device_id *ids, const struct device *dev)
+{
+ return NULL;
+}
+
+static inline bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ return false;
+}
+
+#define ACPI_PTR(_ptr) (NULL)
+
#endif /* !CONFIG_ACPI */
#ifdef CONFIG_ACPI
#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
#endif
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+int acpi_dev_runtime_suspend(struct device *dev);
+int acpi_dev_runtime_resume(struct device *dev);
+int acpi_subsys_runtime_suspend(struct device *dev);
+int acpi_subsys_runtime_resume(struct device *dev);
+#else
+static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+int acpi_dev_suspend_late(struct device *dev);
+int acpi_dev_resume_early(struct device *dev);
+int acpi_subsys_prepare(struct device *dev);
+int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_resume_early(struct device *dev);
+#else
+static inline int acpi_dev_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
+static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
+#endif
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
+int acpi_dev_pm_detach(struct device *dev, bool power_off);
+#else
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ return -ENODEV;
+}
+static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {}
+#endif
+
+#ifdef CONFIG_ACPI
+__printf(3, 4)
+void acpi_handle_printk(const char *level, acpi_handle handle,
+ const char *fmt, ...);
+#else /* !CONFIG_ACPI */
+static inline __printf(3, 4) void
+acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {}
+#endif /* !CONFIG_ACPI */
+
+/*
+ * acpi_handle_<level>: Print message with ACPI prefix and object path
+ *
+ * These interfaces acquire the global namespace mutex to obtain an object
+ * path. In interrupt context, it shows the object path as <n/a>.
+ */
+#define acpi_handle_emerg(handle, fmt, ...) \
+ acpi_handle_printk(KERN_EMERG, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_alert(handle, fmt, ...) \
+ acpi_handle_printk(KERN_ALERT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_crit(handle, fmt, ...) \
+ acpi_handle_printk(KERN_CRIT, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_err(handle, fmt, ...) \
+ acpi_handle_printk(KERN_ERR, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_warn(handle, fmt, ...) \
+ acpi_handle_printk(KERN_WARNING, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_notice(handle, fmt, ...) \
+ acpi_handle_printk(KERN_NOTICE, handle, fmt, ##__VA_ARGS__)
+#define acpi_handle_info(handle, fmt, ...) \
+ acpi_handle_printk(KERN_INFO, handle, fmt, ##__VA_ARGS__)
+
+/* REVISIT: Support CONFIG_DYNAMIC_DEBUG when necessary */
+#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+#define acpi_handle_debug(handle, fmt, ...) \
+ acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__)
+#else
+#define acpi_handle_debug(handle, fmt, ...) \
+({ \
+ if (0) \
+ acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__); \
+ 0; \
+})
+#endif
+
#endif /*_LINUX_ACPI_H*/
struct clk_hw *__clk_get_hw(struct clk *clk);
u8 __clk_get_num_parents(struct clk *clk);
struct clk *__clk_get_parent(struct clk *clk);
-inline int __clk_get_enable_count(struct clk *clk);
-inline int __clk_get_prepare_count(struct clk *clk);
+int __clk_get_enable_count(struct clk *clk);
+int __clk_get_prepare_count(struct clk *clk);
unsigned long __clk_get_rate(struct clk *clk);
unsigned long __clk_get_flags(struct clk *clk);
int __clk_is_enabled(struct clk *clk);
#ifndef _LINUX_CPUFREQ_H
#define _LINUX_CPUFREQ_H
+#include <asm/cputime.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
#include <linux/threads.h>
#include <asm/div64.h>
#define CPUFREQ_NAME_LEN 16
+/* Print length for names. Extra 1 space for accomodating '\n' in prints */
+#define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1)
/*********************************************************************
unsigned int cpu);
void cpufreq_frequency_table_put_attr(unsigned int cpu);
-
-
#endif /* _LINUX_CPUFREQ_H */
st_usage->driver_data = data;
}
-struct cpuidle_state_kobj {
- struct cpuidle_state *state;
- struct cpuidle_state_usage *state_usage;
- struct completion kobj_unregister;
- struct kobject kobj;
-};
-
struct cpuidle_device {
unsigned int registered:1;
unsigned int enabled:1;
int state_count;
struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX];
struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-
+ struct cpuidle_driver_kobj *kobj_driver;
struct list_head device_list;
struct kobject kobj;
struct completion kobj_unregister;
struct cpuidle_driver {
const char *name;
struct module *owner;
+ int refcnt;
unsigned int power_specified:1;
/* set to 1 to use the core cpuidle time keeping (for all states). */
struct cpuidle_driver *drv, int index));
extern int cpuidle_play_dead(void);
+extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev);
+extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu);
+extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu);
+
#else
static inline void disable_cpuidle(void) { }
static inline int cpuidle_idle_call(void) { return -ENODEV; }
struct cpuidle_driver *drv, int index))
{ return -ENODEV; }
static inline int cpuidle_play_dead(void) {return -ENODEV; }
-
#endif
#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
* @mod_name: Used for built-in modules.
* @suppress_bind_attrs: Disables bind/unbind via sysfs.
* @of_match_table: The open firmware table.
+ * @acpi_match_table: The ACPI match table.
* @probe: Called to query the existence of a specific device,
* whether this driver can work with it, and bind the driver
* to a specific device.
bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
const struct of_device_id *of_match_table;
+ const struct acpi_device_id *acpi_match_table;
int (*probe) (struct device *dev);
int (*remove) (struct device *dev);
unsigned long segment_boundary_mask;
};
+struct acpi_dev_node {
+#ifdef CONFIG_ACPI
+ void *handle;
+#endif
+};
+
/**
* struct device - The basic device structure
* @parent: The device's "parent" device, the device to which it is attached.
* @dma_mem: Internal for coherent mem override.
* @archdata: For arch-specific additions.
* @of_node: Associated device tree node.
+ * @acpi_node: Associated ACPI device node.
* @devt: For creating the sysfs "dev".
* @id: device instance
* @devres_lock: Spinlock to protect the resource of the device.
struct dev_archdata archdata;
struct device_node *of_node; /* associated device tree node */
+ struct acpi_dev_node acpi_node; /* associated ACPI device node */
dev_t devt; /* dev_t, creates the sysfs "dev" */
u32 id; /* device instance */
return container_of(kobj, struct device, kobj);
}
+#ifdef CONFIG_ACPI
+#define ACPI_HANDLE(dev) ((dev)->acpi_node.handle)
+#define ACPI_HANDLE_SET(dev, _handle_) (dev)->acpi_node.handle = (_handle_)
+#else
+#define ACPI_HANDLE(dev) (NULL)
+#define ACPI_HANDLE_SET(dev, _handle_) do { } while (0)
+#endif
+
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
u32 clkrate;
u32 rev;
u32 flags;
+ void (*set_mpu_wkup_lat)(struct device *dev, long set);
};
#endif
* @platform_data: stored in i2c_client.dev.platform_data
* @archdata: copied into i2c_client.dev.archdata
* @of_node: pointer to OpenFirmware device node
+ * @acpi_node: ACPI device node
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
void *platform_data;
struct dev_archdata *archdata;
struct device_node *of_node;
+ struct acpi_dev_node acpi_node;
int irq;
};
i2c_del_driver)
#endif /* I2C */
+
+#if IS_ENABLED(CONFIG_ACPI_I2C)
+extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif
+
#endif /* _LINUX_I2C_H */
static inline bool page_is_guard(struct page *page) { return false; }
#endif /* CONFIG_DEBUG_PAGEALLOC */
-extern void reset_zone_present_pages(void);
-extern void fixup_zone_present_pages(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
unsigned long size,
enum memmap_context context);
-extern void lruvec_init(struct lruvec *lruvec, struct zone *zone);
+extern void lruvec_init(struct lruvec *lruvec);
static inline struct zone *lruvec_zone(struct lruvec *lruvec)
{
{
return NULL;
}
+#ifndef of_iomap
static inline void __iomem *of_iomap(struct device_node *device, int index)
{
return NULL;
}
+#endif
static inline const __be32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags)
{
--- /dev/null
+/*
+ * omap_ocp2scp.h -- ocp2scp header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_OCP2SCP_H
+#define __DRIVERS_OMAP_OCP2SCP_H
+
+struct omap_ocp2scp_dev {
+ const char *drv_name;
+ struct resource *res;
+};
+
+struct omap_ocp2scp_platform_data {
+ int dev_cnt;
+ struct omap_ocp2scp_dev **devices;
+};
+#endif /* __DRIVERS_OMAP_OCP2SCP_H */
struct platform_device_info {
struct device *parent;
+ struct acpi_dev_node acpi_node;
const char *name;
int id;
unsigned long active_jiffies;
unsigned long suspended_jiffies;
unsigned long accounting_timestamp;
- struct dev_pm_qos_request *pq_req;
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
- struct pm_qos_constraints *constraints;
+ struct dev_pm_qos *qos;
};
extern void update_pm_runtime_accounting(struct device *dev);
PM_QOS_NUM_CLASSES,
};
+enum pm_qos_flags_status {
+ PM_QOS_FLAGS_UNDEFINED = -1,
+ PM_QOS_FLAGS_NONE,
+ PM_QOS_FLAGS_SOME,
+ PM_QOS_FLAGS_ALL,
+};
+
#define PM_QOS_DEFAULT_VALUE -1
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
#define PM_QOS_DEV_LAT_DEFAULT_VALUE 0
+#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
+#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1)
+
struct pm_qos_request {
struct plist_node node;
int pm_qos_class;
struct delayed_work work; /* for pm_qos_update_request_timeout */
};
+struct pm_qos_flags_request {
+ struct list_head node;
+ s32 flags; /* Do not change to 64 bit */
+};
+
+enum dev_pm_qos_req_type {
+ DEV_PM_QOS_LATENCY = 1,
+ DEV_PM_QOS_FLAGS,
+};
+
struct dev_pm_qos_request {
- struct plist_node node;
+ enum dev_pm_qos_req_type type;
+ union {
+ struct plist_node pnode;
+ struct pm_qos_flags_request flr;
+ } data;
struct device *dev;
};
};
/*
- * Note: The lockless read path depends on the CPU accessing
- * target_value atomically. Atomic access is only guaranteed on all CPU
+ * Note: The lockless read path depends on the CPU accessing target_value
+ * or effective_flags atomically. Atomic access is only guaranteed on all CPU
* types linux supports for 32 bit quantites
*/
struct pm_qos_constraints {
struct blocking_notifier_head *notifiers;
};
+struct pm_qos_flags {
+ struct list_head list;
+ s32 effective_flags; /* Do not change to 64 bit */
+};
+
+struct dev_pm_qos {
+ struct pm_qos_constraints latency;
+ struct pm_qos_flags flags;
+ struct dev_pm_qos_request *latency_req;
+ struct dev_pm_qos_request *flags_req;
+};
+
/* Action requested to pm_qos_update_target */
enum pm_qos_req_action {
PM_QOS_ADD_REQ, /* Add a new request */
int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
enum pm_qos_req_action action, int value);
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req,
+ enum pm_qos_req_action action, s32 val);
void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
s32 value);
void pm_qos_update_request(struct pm_qos_request *req,
s32 pm_qos_read_value(struct pm_qos_constraints *c);
#ifdef CONFIG_PM
+enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask);
+enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask);
s32 __dev_pm_qos_read_value(struct device *dev);
s32 dev_pm_qos_read_value(struct device *dev);
int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
- s32 value);
+ enum dev_pm_qos_req_type type, s32 value);
int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
int dev_pm_qos_add_notifier(struct device *dev,
int dev_pm_qos_add_ancestor_request(struct device *dev,
struct dev_pm_qos_request *req, s32 value);
#else
+static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
+ s32 mask)
+ { return PM_QOS_FLAGS_UNDEFINED; }
+static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev,
+ s32 mask)
+ { return PM_QOS_FLAGS_UNDEFINED; }
static inline s32 __dev_pm_qos_read_value(struct device *dev)
{ return 0; }
static inline s32 dev_pm_qos_read_value(struct device *dev)
{ return 0; }
static inline int dev_pm_qos_add_request(struct device *dev,
struct dev_pm_qos_request *req,
+ enum dev_pm_qos_req_type type,
s32 value)
{ return 0; }
static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
#ifdef CONFIG_PM_RUNTIME
int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
void dev_pm_qos_hide_latency_limit(struct device *dev);
+int dev_pm_qos_expose_flags(struct device *dev, s32 value);
+void dev_pm_qos_hide_flags(struct device *dev);
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev)
+{
+ return dev->power.qos->latency_req->data.pnode.prio;
+}
+
+static inline s32 dev_pm_qos_requested_flags(struct device *dev)
+{
+ return dev->power.qos->flags_req->data.flr.flags;
+}
#else
static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
{ return 0; }
static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
+static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value)
+ { return 0; }
+static inline void dev_pm_qos_hide_flags(struct device *dev) {}
+static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set)
+ { return 0; }
+
+static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; }
+static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
#endif
#endif
* struct rio_net - RIO network info
* @node: Node in global list of RIO networks
* @devices: List of devices in this network
+ * @switches: List of switches in this netowrk
* @mports: List of master ports accessing this network
* @hport: Default port for accessing this network
* @id: RIO network ID
+ * @destid_table: destID allocation table
*/
struct rio_net {
struct list_head node; /* node in list of networks */
u16 debounce_rep; /* additional consecutive good readings
* required after the first two */
int gpio_pendown; /* the GPIO used to decide the pendown
- * state if get_pendown_state == NULL
- */
+ * state if get_pendown_state == NULL */
+ int gpio_pendown_debounce; /* platform specific debounce time for
+ * the gpio_pendown */
int (*get_pendown_state)(void);
int (*filter_init) (const struct ads7846_platform_data *pdata,
void **filter_data);
static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
# endif /* !NO_HZ */
+# ifdef CONFIG_CPU_IDLE_GOV_MENU
+extern void menu_hrtimer_cancel(void);
+# else
+static inline void menu_hrtimer_cancel(void) {}
+# endif /* CONFIG_CPU_IDLE_GOV_MENU */
+
#endif
};
extern void xfrm_init(void);
-extern void xfrm4_init(int rt_hash_size);
+extern void xfrm4_init(void);
extern int xfrm_state_init(struct net *net);
extern void xfrm_state_fini(struct net *net);
extern void xfrm4_state_init(void);
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+ unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
+ unsigned no_write_same:1; /* no WRITE SAME command */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned skip_vpd_pages:1; /* do not read VPD pages */
int retries, struct scsi_sense_hdr *sshdr);
extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
int buf_len);
+extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+ unsigned int len, unsigned char opcode);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
#define OOM_SCORE_ADJ_MIN (-1000)
#define OOM_SCORE_ADJ_MAX 1000
+/*
+ * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy
+ * purposes.
+ */
+#define OOM_DISABLE (-17)
+/* inclusive */
+#define OOM_ADJUST_MIN (-16)
+#define OOM_ADJUST_MAX 15
+
#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
struct task_struct *idle;
- if (cpu_online(cpu) || !cpu_present(cpu))
- return -EINVAL;
-
cpu_hotplug_begin();
+ if (cpu_online(cpu) || !cpu_present(cpu)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
idle = idle_thread_get(cpu);
if (IS_ERR(idle)) {
ret = PTR_ERR(idle);
struct futex_pi_state **ps,
struct task_struct *task, int set_waiters)
{
- int lock_taken, ret, ownerdied = 0;
+ int lock_taken, ret, force_take = 0;
u32 uval, newval, curval, vpid = task_pid_vnr(task);
retry:
newval = curval | FUTEX_WAITERS;
/*
- * There are two cases, where a futex might have no owner (the
- * owner TID is 0): OWNER_DIED. We take over the futex in this
- * case. We also do an unconditional take over, when the owner
- * of the futex died.
- *
- * This is safe as we are protected by the hash bucket lock !
+ * Should we force take the futex? See below.
*/
- if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
- /* Keep the OWNER_DIED bit */
+ if (unlikely(force_take)) {
+ /*
+ * Keep the OWNER_DIED and the WAITERS bit and set the
+ * new TID value.
+ */
newval = (curval & ~FUTEX_TID_MASK) | vpid;
- ownerdied = 0;
+ force_take = 0;
lock_taken = 1;
}
goto retry;
/*
- * We took the lock due to owner died take over.
+ * We took the lock due to forced take over.
*/
if (unlikely(lock_taken))
return 1;
switch (ret) {
case -ESRCH:
/*
- * No owner found for this futex. Check if the
- * OWNER_DIED bit is set to figure out whether
- * this is a robust futex or not.
+ * We failed to find an owner for this
+ * futex. So we have no pi_state to block
+ * on. This can happen in two cases:
+ *
+ * 1) The owner died
+ * 2) A stale FUTEX_WAITERS bit
+ *
+ * Re-read the futex value.
*/
if (get_futex_value_locked(&curval, uaddr))
return -EFAULT;
/*
- * We simply start over in case of a robust
- * futex. The code above will take the futex
- * and return happy.
+ * If the owner died or we have a stale
+ * WAITERS bit the owner TID in the user space
+ * futex is 0.
*/
- if (curval & FUTEX_OWNER_DIED) {
- ownerdied = 1;
+ if (!(curval & FUTEX_TID_MASK)) {
+ force_take = 1;
goto retry;
}
default:
}
}
+/**
+ * pm_qos_flags_remove_req - Remove device PM QoS flags request.
+ * @pqf: Device PM QoS flags set to remove the request from.
+ * @req: Request to remove from the set.
+ */
+static void pm_qos_flags_remove_req(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req)
+{
+ s32 val = 0;
+
+ list_del(&req->node);
+ list_for_each_entry(req, &pqf->list, node)
+ val |= req->flags;
+
+ pqf->effective_flags = val;
+}
+
+/**
+ * pm_qos_update_flags - Update a set of PM QoS flags.
+ * @pqf: Set of flags to update.
+ * @req: Request to add to the set, to modify, or to remove from the set.
+ * @action: Action to take on the set.
+ * @val: Value of the request to add or modify.
+ *
+ * Update the given set of PM QoS flags and call notifiers if the aggregate
+ * value has changed. Returns 1 if the aggregate constraint value has changed,
+ * 0 otherwise.
+ */
+bool pm_qos_update_flags(struct pm_qos_flags *pqf,
+ struct pm_qos_flags_request *req,
+ enum pm_qos_req_action action, s32 val)
+{
+ unsigned long irqflags;
+ s32 prev_value, curr_value;
+
+ spin_lock_irqsave(&pm_qos_lock, irqflags);
+
+ prev_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+ switch (action) {
+ case PM_QOS_REMOVE_REQ:
+ pm_qos_flags_remove_req(pqf, req);
+ break;
+ case PM_QOS_UPDATE_REQ:
+ pm_qos_flags_remove_req(pqf, req);
+ case PM_QOS_ADD_REQ:
+ req->flags = val;
+ INIT_LIST_HEAD(&req->node);
+ list_add_tail(&req->node, &pqf->list);
+ pqf->effective_flags |= val;
+ break;
+ default:
+ /* no action */
+ ;
+ }
+
+ curr_value = list_empty(&pqf->list) ? 0 : pqf->effective_flags;
+
+ spin_unlock_irqrestore(&pm_qos_lock, irqflags);
+
+ return prev_value != curr_value;
+}
+
/**
* pm_qos_request - returns current system wide qos expectation
* @pm_qos_class: identification of which qos value is requested
if (!ts->inidle)
return;
+ /* Cancel the timer because CPU already waken up from the C-states*/
+ menu_hrtimer_cancel();
__tick_nohz_idle_enter(ts);
}
ts->inidle = 0;
+ /* Cancel the timer because CPU already waken up from the C-states*/
+ menu_hrtimer_cancel();
if (ts->idle_active || ts->tick_stopped)
now = ktime_get();
************** MIPS *****************
***************************************/
#if defined(__mips__) && W_TYPE_SIZE == 32
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v) \
+do { \
+ UDItype __ll = (UDItype)(u) * (v); \
+ w1 = __ll >> 32; \
+ w0 = __ll; \
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("multu %2,%3" \
: "=l" ((USItype)(w0)), \
************** MIPS/64 **************
***************************************/
#if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v) \
+do { \
+ typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \
+ __ll_UTItype __ll = (__ll_UTItype)(u) * (v); \
+ w1 = __ll >> 64; \
+ w0 = __ll; \
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("dmultu %2,%3" \
: "=l" ((UDItype)(w0)), \
int order = ilog2(BITS_PER_LONG);
__free_pages_bootmem(pfn_to_page(start), order);
- fixup_zone_present_pages(page_to_nid(pfn_to_page(start)),
- start, start + BITS_PER_LONG);
count += BITS_PER_LONG;
start += BITS_PER_LONG;
} else {
if (vec & 1) {
page = pfn_to_page(start + off);
__free_pages_bootmem(page, 0);
- fixup_zone_present_pages(
- page_to_nid(page),
- start + off, start + off + 1);
count++;
}
vec >>= 1;
pages = bdata->node_low_pfn - bdata->node_min_pfn;
pages = bootmem_bootmap_pages(pages);
count += pages;
- while (pages--) {
- fixup_zone_present_pages(page_to_nid(page),
- page_to_pfn(page), page_to_pfn(page) + 1);
+ while (pages--)
__free_pages_bootmem(page++, 0);
- }
bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count);
{
unsigned long addr = (unsigned long)vaddr;
- if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
+ if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) {
int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
return pte_page(pkmap_page_table[i]);
}
struct mem_cgroup *memcg)
{
struct mem_cgroup_per_zone *mz;
+ struct lruvec *lruvec;
- if (mem_cgroup_disabled())
- return &zone->lruvec;
+ if (mem_cgroup_disabled()) {
+ lruvec = &zone->lruvec;
+ goto out;
+ }
mz = mem_cgroup_zoneinfo(memcg, zone_to_nid(zone), zone_idx(zone));
- return &mz->lruvec;
+ lruvec = &mz->lruvec;
+out:
+ /*
+ * Since a node can be onlined after the mem_cgroup was created,
+ * we have to be prepared to initialize lruvec->zone here;
+ * and if offlined then reonlined, we need to reinitialize it.
+ */
+ if (unlikely(lruvec->zone != zone))
+ lruvec->zone = zone;
+ return lruvec;
}
/*
struct mem_cgroup_per_zone *mz;
struct mem_cgroup *memcg;
struct page_cgroup *pc;
+ struct lruvec *lruvec;
- if (mem_cgroup_disabled())
- return &zone->lruvec;
+ if (mem_cgroup_disabled()) {
+ lruvec = &zone->lruvec;
+ goto out;
+ }
pc = lookup_page_cgroup(page);
memcg = pc->mem_cgroup;
pc->mem_cgroup = memcg = root_mem_cgroup;
mz = page_cgroup_zoneinfo(memcg, page);
- return &mz->lruvec;
+ lruvec = &mz->lruvec;
+out:
+ /*
+ * Since a node can be onlined after the mem_cgroup was created,
+ * we have to be prepared to initialize lruvec->zone here;
+ * and if offlined then reonlined, we need to reinitialize it.
+ */
+ if (unlikely(lruvec->zone != zone))
+ lruvec->zone = zone;
+ return lruvec;
}
/**
static u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
{
u64 limit;
- u64 memsw;
limit = res_counter_read_u64(&memcg->res, RES_LIMIT);
- limit += total_swap_pages << PAGE_SHIFT;
- memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
/*
- * If memsw is finite and limits the amount of swap space available
- * to this memcg, return that limit.
+ * Do not consider swap space if we cannot swap due to swappiness
*/
- return min(limit, memsw);
+ if (mem_cgroup_swappiness(memcg)) {
+ u64 memsw;
+
+ limit += total_swap_pages << PAGE_SHIFT;
+ memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
+
+ /*
+ * If memsw is finite and limits the amount of swap space
+ * available to this memcg, return that limit.
+ */
+ limit = min(limit, memsw);
+ }
+
+ return limit;
}
void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
static bool mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
int node, int zid, enum lru_list lru)
{
- struct mem_cgroup_per_zone *mz;
+ struct lruvec *lruvec;
unsigned long flags, loop;
struct list_head *list;
struct page *busy;
struct zone *zone;
zone = &NODE_DATA(node)->node_zones[zid];
- mz = mem_cgroup_zoneinfo(memcg, node, zid);
- list = &mz->lruvec.lists[lru];
+ lruvec = mem_cgroup_zone_lruvec(zone, memcg);
+ list = &lruvec->lists[lru];
- loop = mz->lru_size[lru];
+ loop = mem_cgroup_get_lru_size(lruvec, lru);
/* give some margin against EBUSY etc...*/
loop += 256;
busy = NULL;
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = &pn->zoneinfo[zone];
- lruvec_init(&mz->lruvec, &NODE_DATA(node)->node_zones[zone]);
+ lruvec_init(&mz->lruvec);
mz->usage_in_excess = 0;
mz->on_tree = false;
mz->memcg = memcg;
int ret = 0;
int page_mkwrite = 0;
struct page *dirty_page = NULL;
- unsigned long mmun_start; /* For mmu_notifiers */
- unsigned long mmun_end; /* For mmu_notifiers */
- bool mmun_called = false; /* For mmu_notifiers */
+ unsigned long mmun_start = 0; /* For mmu_notifiers */
+ unsigned long mmun_end = 0; /* For mmu_notifiers */
old_page = vm_normal_page(vma, address, orig_pte);
if (!old_page) {
goto oom_free_new;
mmun_start = address & PAGE_MASK;
- mmun_end = (address & PAGE_MASK) + PAGE_SIZE;
- mmun_called = true;
+ mmun_end = mmun_start + PAGE_SIZE;
mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
/*
page_cache_release(new_page);
unlock:
pte_unmap_unlock(page_table, ptl);
- if (mmun_called)
+ if (mmun_end > mmun_start)
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
if (old_page) {
/*
void __ref put_page_bootmem(struct page *page)
{
unsigned long type;
- struct zone *zone;
type = (unsigned long) page->lru.next;
BUG_ON(type < MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE ||
set_page_private(page, 0);
INIT_LIST_HEAD(&page->lru);
__free_pages_bootmem(page, 0);
-
- zone = page_zone(page);
- zone_span_writelock(zone);
- zone->present_pages++;
- zone_span_writeunlock(zone);
- totalram_pages++;
}
}
struct vm_area_struct *vma = mm->mmap;
while (vma) {
struct anon_vma_chain *avc;
+ vma_lock_anon_vma(vma);
list_for_each_entry(avc, &vma->anon_vma_chain, same_vma)
anon_vma_interval_tree_verify(avc);
+ vma_unlock_anon_vma(vma);
vma = vma->vm_next;
i++;
}
}
#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
-void lruvec_init(struct lruvec *lruvec, struct zone *zone)
+void lruvec_init(struct lruvec *lruvec)
{
enum lru_list lru;
for_each_lru(lru)
INIT_LIST_HEAD(&lruvec->lists[lru]);
-
-#ifdef CONFIG_MEMCG
- lruvec->zone = zone;
-#endif
}
return 0;
__free_pages_memory(start_pfn, end_pfn);
- fixup_zone_present_pages(pfn_to_nid(start >> PAGE_SHIFT),
- start_pfn, end_pfn);
return end_pfn - start_pfn;
}
phys_addr_t start, end, size;
u64 i;
- reset_zone_present_pages();
for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
count += __free_memory_core(start, end);
mt = get_pageblock_migratetype(page);
if (unlikely(mt != MIGRATE_ISOLATE))
- __mod_zone_freepage_state(zone, -(1UL << order), mt);
+ __mod_zone_freepage_state(zone, -(1UL << alloc_order), mt);
if (alloc_order != order)
expand(zone, page, alloc_order, order,
zone->zone_pgdat = pgdat;
zone_pcp_init(zone);
- lruvec_init(&zone->lruvec, zone);
+ lruvec_init(&zone->lruvec);
if (!size)
continue;
dump_page_flags(page->flags);
mem_cgroup_print_bad_page(page);
}
-
-/* reset zone->present_pages */
-void reset_zone_present_pages(void)
-{
- struct zone *z;
- int i, nid;
-
- for_each_node_state(nid, N_HIGH_MEMORY) {
- for (i = 0; i < MAX_NR_ZONES; i++) {
- z = NODE_DATA(nid)->node_zones + i;
- z->present_pages = 0;
- }
- }
-}
-
-/* calculate zone's present pages in buddy system */
-void fixup_zone_present_pages(int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- struct zone *z;
- unsigned long zone_start_pfn, zone_end_pfn;
- int i;
-
- for (i = 0; i < MAX_NR_ZONES; i++) {
- z = NODE_DATA(nid)->node_zones + i;
- zone_start_pfn = z->zone_start_pfn;
- zone_end_pfn = zone_start_pfn + z->spanned_pages;
-
- /* if the two regions intersect */
- if (!(zone_start_pfn >= end_pfn || zone_end_pfn <= start_pfn))
- z->present_pages += min(end_pfn, zone_end_pfn) -
- max(start_pfn, zone_start_pfn);
- }
-}
kfree(info->symlink);
simple_xattrs_free(&info->xattrs);
- BUG_ON(inode->i_blocks);
+ WARN_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
clear_inode(inode);
}
if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
- /* We already confirmed swap, and make no allocation */
- VM_BUG_ON(error);
+ /*
+ * We already confirmed swap under page lock, and make
+ * no memory allocation here, so usually no possibility
+ * of error; but free_swap_and_cache() only trylocks a
+ * page, so it is just possible that the entry has been
+ * truncated or holepunched since swap was confirmed.
+ * shmem_undo_range() will have done some of the
+ * unaccounting, now delete_from_swap_cache() will do
+ * the rest (including mem_cgroup_uncharge_swapcache).
+ * Reset swap.val? No, leave it so "failed" goes back to
+ * "repeat": reading a hole and writing should succeed.
+ */
+ if (error)
+ delete_from_swap_cache(page);
}
if (error)
goto failed;
BUG_ON(!current->mm);
pathname = getname(specialfile);
- err = PTR_ERR(pathname);
if (IS_ERR(pathname))
- goto out;
+ return PTR_ERR(pathname);
victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
err = PTR_ERR(victim);
out_dput:
filp_close(victim, NULL);
out:
+ putname(pathname);
return err;
}
return false;
}
-#ifdef CONFIG_COMPACTION
-/*
- * If compaction is deferred for sc->order then scale the number of pages
- * reclaimed based on the number of consecutive allocation failures
- */
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
- struct lruvec *lruvec, struct scan_control *sc)
-{
- struct zone *zone = lruvec_zone(lruvec);
-
- if (zone->compact_order_failed <= sc->order)
- pages_for_compaction <<= zone->compact_defer_shift;
- return pages_for_compaction;
-}
-#else
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
- struct lruvec *lruvec, struct scan_control *sc)
-{
- return pages_for_compaction;
-}
-#endif
-
/*
* Reclaim/compaction is used for high-order allocation requests. It reclaims
* order-0 pages before compacting the zone. should_continue_reclaim() returns
* inactive lists are large enough, continue reclaiming
*/
pages_for_compaction = (2UL << sc->order);
-
- pages_for_compaction = scale_for_compaction(pages_for_compaction,
- lruvec, sc);
inactive_lru_pages = get_lru_size(lruvec, LRU_INACTIVE_FILE);
if (nr_swap_pages > 0)
inactive_lru_pages += get_lru_size(lruvec, LRU_INACTIVE_ANON);
soft_iface->last_rx = jiffies;
+ /* Let the bridge loop avoidance check the packet. If will
+ * not handle it, we can safely push it up.
+ */
+ if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
+ goto out;
+
if (orig_node)
batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
ethhdr->h_source);
if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
goto dropped;
- /* Let the bridge loop avoidance check the packet. If will
- * not handle it, we can safely push it up.
- */
- if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
- goto out;
-
netif_rx(skb);
goto out;
*/
tt_global_entry->common.flags &= ~BATADV_TT_CLIENT_TEMP;
+ /* the change can carry possible "attribute" flags like the
+ * TT_CLIENT_WIFI, therefore they have to be copied in the
+ * client entry
+ */
+ tt_global_entry->common.flags |= flags;
+
/* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only
* one originator left in the list and we previously received a
* delete + roaming change for this originator.
memcpy(tt_change->addr, tt_common_entry->addr,
ETH_ALEN);
- tt_change->flags = BATADV_NO_FLAGS;
+ tt_change->flags = tt_common_entry->flags;
tt_count++;
tt_change++;
{
bool ret = false;
+ /* if the originator is a backbone node (meaning it belongs to the same
+ * LAN of this node) the temporary client must not be added because to
+ * reach such destination the node must use the LAN instead of the mesh
+ */
+ if (batadv_bla_is_backbone_gw_orig(bat_priv, orig_node->orig))
+ goto out;
+
if (!batadv_tt_global_add(bat_priv, orig_node, addr,
BATADV_TT_CLIENT_TEMP,
atomic_read(&orig_node->last_ttvn)))
if (hdev->dev_type != HCI_AMP)
set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
- schedule_work(&hdev->power_on);
-
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
+ schedule_work(&hdev->power_on);
+
return id;
err_wqueue:
struct hci_dev *d;
size_t rp_len;
u16 count;
- int i, err;
+ int err;
BT_DBG("sock %p", sk);
return -ENOMEM;
}
- rp->num_controllers = cpu_to_le16(count);
-
- i = 0;
+ count = 0;
list_for_each_entry(d, &hci_dev_list, list) {
if (test_bit(HCI_SETUP, &d->dev_flags))
continue;
if (!mgmt_valid_hdev(d))
continue;
- rp->index[i++] = cpu_to_le16(d->id);
+ rp->index[count++] = cpu_to_le16(d->id);
BT_DBG("Added hci%u", d->id);
}
+ rp->num_controllers = cpu_to_le16(count);
+ rp_len = sizeof(*rp) + (2 * count);
+
read_unlock(&hci_dev_list_lock);
err = cmd_complete(sk, MGMT_INDEX_NONE, MGMT_OP_READ_INDEX_LIST, 0, rp,
continue;
list_del(&match->list);
+ kfree(match);
found++;
}
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->hcon->flags);
mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
- hcon->dst_type, reason);
+ hcon->dst_type, HCI_ERROR_AUTH_FAILURE);
cancel_delayed_work_sync(&conn->security_timer);
if (unlikely(tcpu != next_cpu) &&
(tcpu == RPS_NO_CPU || !cpu_online(tcpu) ||
((int)(per_cpu(softnet_data, tcpu).input_queue_head -
- rflow->last_qtail)) >= 0))
+ rflow->last_qtail)) >= 0)) {
+ tcpu = next_cpu;
rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
+ }
if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) {
*rflowp = rflow;
*/
ha = list_first_entry(&dev->dev_addrs.list,
struct netdev_hw_addr, list);
- if (ha->addr == dev->dev_addr && ha->refcount == 1)
+ if (!memcmp(ha->addr, addr, dev->addr_len) &&
+ ha->type == addr_type && ha->refcount == 1)
return -ENOENT;
err = __hw_addr_del(&dev->dev_addrs, addr, dev->addr_len,
.name = "statistics",
.attrs = netstat_attrs,
};
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+static struct attribute *wireless_attrs[] = {
+ NULL
+};
+
+static struct attribute_group wireless_group = {
+ .name = "wireless",
+ .attrs = wireless_attrs,
+};
+#endif
#endif /* CONFIG_SYSFS */
#ifdef CONFIG_RPS
groups++;
*groups++ = &netstat_group;
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+ if (net->ieee80211_ptr)
+ *groups++ = &wireless_group;
+#if IS_ENABLED(CONFIG_WIRELESS_EXT)
+ else if (net->wireless_handlers)
+ *groups++ = &wireless_group;
+#endif
+#endif
#endif /* CONFIG_SYSFS */
error = device_add(dev);
struct inet_sock *inet = inet_sk(sk);
int val = 0, err;
- if (((1<<optname) & ((1<<IP_PKTINFO) | (1<<IP_RECVTTL) |
- (1<<IP_RECVOPTS) | (1<<IP_RECVTOS) |
- (1<<IP_RETOPTS) | (1<<IP_TOS) |
- (1<<IP_TTL) | (1<<IP_HDRINCL) |
- (1<<IP_MTU_DISCOVER) | (1<<IP_RECVERR) |
- (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) |
- (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT) |
- (1<<IP_MINTTL) | (1<<IP_NODEFRAG))) ||
- optname == IP_UNICAST_IF ||
- optname == IP_MULTICAST_TTL ||
- optname == IP_MULTICAST_ALL ||
- optname == IP_MULTICAST_LOOP ||
- optname == IP_RECVORIGDSTADDR) {
+ switch (optname) {
+ case IP_PKTINFO:
+ case IP_RECVTTL:
+ case IP_RECVOPTS:
+ case IP_RECVTOS:
+ case IP_RETOPTS:
+ case IP_TOS:
+ case IP_TTL:
+ case IP_HDRINCL:
+ case IP_MTU_DISCOVER:
+ case IP_RECVERR:
+ case IP_ROUTER_ALERT:
+ case IP_FREEBIND:
+ case IP_PASSSEC:
+ case IP_TRANSPARENT:
+ case IP_MINTTL:
+ case IP_NODEFRAG:
+ case IP_UNICAST_IF:
+ case IP_MULTICAST_TTL:
+ case IP_MULTICAST_ALL:
+ case IP_MULTICAST_LOOP:
+ case IP_RECVORIGDSTADDR:
if (optlen >= sizeof(int)) {
if (get_user(val, (int __user *) optval))
return -EFAULT;
if (tunnel != NULL) {
struct pcpu_tstats *tstats;
+ if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+ return -1;
+
tstats = this_cpu_ptr(tunnel->dev->tstats);
u64_stats_update_begin(&tstats->syncp);
tstats->rx_packets++;
tstats->rx_bytes += skb->len;
u64_stats_update_end(&tstats->syncp);
+ skb->mark = 0;
+ secpath_reset(skb);
skb->dev = tunnel->dev;
return 1;
}
if (dev_out->flags & IFF_LOOPBACK)
flags |= RTCF_LOCAL;
+ do_cache = true;
if (type == RTN_BROADCAST) {
flags |= RTCF_BROADCAST | RTCF_LOCAL;
fi = NULL;
if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr,
fl4->flowi4_proto))
flags &= ~RTCF_LOCAL;
+ else
+ do_cache = false;
/* If multicast route do not exist use
* default one, but do not gateway in this case.
* Yes, it is hack.
}
fnhe = NULL;
- do_cache = fi != NULL;
- if (fi) {
+ do_cache &= fi != NULL;
+ if (do_cache) {
struct rtable __rcu **prth;
struct fib_nh *nh = &FIB_RES_NH(*res);
pr_err("Unable to create route proc files\n");
#ifdef CONFIG_XFRM
xfrm_init();
- xfrm4_init(ip_rt_max_size);
+ xfrm4_init();
#endif
rtnl_register(PF_INET, RTM_GETROUTE, inet_rtm_getroute, NULL, NULL);
wait_for_sndbuf:
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
wait_for_memory:
- if (copied && likely(!tp->repair))
+ if (copied)
tcp_push(sk, flags & ~MSG_MORE, mss_now, TCP_NAGLE_PUSH);
if ((err = sk_stream_wait_memory(sk, &timeo)) != 0)
}
out:
- if (copied && likely(!tp->repair))
+ if (copied)
tcp_push(sk, flags, mss_now, tp->nonagle);
release_sock(sk);
return copied + copied_syn;
goto discard;
}
- /* ts_recent update must be made after we are sure that the packet
- * is in window.
- */
- tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
-
/* step 3: check security and precedence [ignored] */
/* step 4: Check for a SYN
if (th->ack && tcp_ack(sk, skb, FLAG_SLOWPATH) < 0)
goto discard;
+ /* ts_recent update must be made after we are sure that the packet
+ * is in window.
+ */
+ tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
tcp_rcv_rtt_measure_ts(sk, skb);
/* Process urgent data. */
} else
goto discard;
+ /* ts_recent update must be made after we are sure that the packet
+ * is in window.
+ */
+ tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
/* step 6: check the URG bit */
tcp_urg(sk, skb, th);
#include <linux/rcupdate.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
-#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/cache.h>
#include <linux/slab.h>
#include <linux/tcp.h>
#include <linux/hash.h>
#include <linux/tcp_metrics.h>
+#include <linux/vmalloc.h>
#include <net/inet_connection_sock.h>
#include <net/net_namespace.h>
net->ipv4.tcp_metrics_hash_log = order_base_2(slots);
size = sizeof(struct tcpm_hash_bucket) << net->ipv4.tcp_metrics_hash_log;
- net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL);
+ net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
+ if (!net->ipv4.tcp_metrics_hash)
+ net->ipv4.tcp_metrics_hash = vzalloc(size);
+
if (!net->ipv4.tcp_metrics_hash)
return -ENOMEM;
tm = next;
}
}
- kfree(net->ipv4.tcp_metrics_hash);
+ if (is_vmalloc_addr(net->ipv4.tcp_metrics_hash))
+ vfree(net->ipv4.tcp_metrics_hash);
+ else
+ kfree(net->ipv4.tcp_metrics_hash);
}
static __net_initdata struct pernet_operations tcp_net_metrics_ops = {
tso_segs = tcp_init_tso_segs(sk, skb, mss_now);
BUG_ON(!tso_segs);
+ if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE)
+ goto repair; /* Skip network transmission */
+
cwnd_quota = tcp_cwnd_test(tp, skb);
if (!cwnd_quota)
break;
if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp)))
break;
+repair:
/* Advance the send_head. This one is sent out.
* This call will increment packets_out.
*/
xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo);
}
-void __init xfrm4_init(int rt_max_size)
+void __init xfrm4_init(void)
{
- /*
- * Select a default value for the gc_thresh based on the main route
- * table hash size. It seems to me the worst case scenario is when
- * we have ipsec operating in transport mode, in which we create a
- * dst_entry per socket. The xfrm gc algorithm starts trying to remove
- * entries at gc_thresh, and prevents new allocations as 2*gc_thresh
- * so lets set an initial xfrm gc_thresh value at the rt_max_size/2.
- * That will let us store an ipsec connection per route table entry,
- * and start cleaning when were 1/2 full
- */
- xfrm4_dst_ops.gc_thresh = rt_max_size/2;
dst_entries_init(&xfrm4_dst_ops);
xfrm4_state_init();
return NULL;
dst->ops->update_pmtu(dst, sk, NULL, mtu);
- return inet6_csk_route_socket(sk, &fl6);
+ dst = inet6_csk_route_socket(sk, &fl6);
+ return IS_ERR(dst) ? NULL : dst;
}
EXPORT_SYMBOL_GPL(inet6_csk_update_pmtu);
if (val < 0 || val > 255)
goto e_inval;
np->min_hopcount = val;
+ retv = 0;
break;
case IPV6_DONTFRAG:
np->dontfrag = valbool;
else
local->probe_req_reg--;
+ if (!local->open_count)
+ break;
+
ieee80211_queue_work(&local->hw, &local->reconfig_filter);
break;
default:
mutex_lock(&sdata->u.ibss.mtx);
- sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
- memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
- sdata->u.ibss.ssid_len = 0;
-
active_ibss = ieee80211_sta_active_ibss(sdata);
if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
}
}
+ ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
+ memset(ifibss->bssid, 0, ETH_ALEN);
+ ifibss->ssid_len = 0;
+
sta_info_flush(sdata->local, sdata);
spin_lock_bh(&ifibss->incomplete_lock);
struct net_device *dev);
netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev);
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+ struct sk_buff_head *skbs);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
local->hw.wiphy->cipher_suites,
sizeof(u32) * local->hw.wiphy->n_cipher_suites,
GFP_KERNEL);
- if (!suites)
- return -ENOMEM;
+ if (!suites) {
+ result = -ENOMEM;
+ goto fail_wiphy_register;
+ }
for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
u32 suite = local->hw.wiphy->cipher_suites[r];
if (suite == WLAN_CIPHER_SUITE_WEP40 ||
struct cfg80211_sched_scan_request *req)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_sched_scan_ies sched_scan_ies;
+ struct ieee80211_sched_scan_ies sched_scan_ies = {};
int ret, i;
mutex_lock(&local->mtx);
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
- __skb_queue_purge(&sta->ps_tx_buf[ac]);
- __skb_queue_purge(&sta->tx_filtered[ac]);
+ ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
+ ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]);
}
#ifdef CONFIG_MAC80211_MESH
tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]);
if (!tid_tx)
continue;
- __skb_queue_purge(&tid_tx->pending);
+ ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending);
kfree(tid_tx);
}
struct ieee80211_local *local = sdata->local;
struct sk_buff_head pending;
int filtered = 0, buffered = 0, ac;
+ unsigned long flags;
clear_sta_flag(sta, WLAN_STA_SP);
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
int count = skb_queue_len(&pending), tmp;
+ spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags);
skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending);
+ spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags);
tmp = skb_queue_len(&pending);
filtered += tmp - count;
count = tmp;
+ spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags);
skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending);
+ spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags);
tmp = skb_queue_len(&pending);
buffered += tmp - count;
}
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL(ieee80211_free_txskb);
+
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+ struct sk_buff_head *skbs)
+{
+ struct sk_buff *skb;
+
+ while ((skb = __skb_dequeue(skbs)))
+ ieee80211_free_txskb(hw, skb);
+}
if (tx->skb)
ieee80211_free_txskb(&tx->local->hw, tx->skb);
else
- __skb_queue_purge(&tx->skbs);
+ ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs);
return -1;
} else if (unlikely(res == TX_QUEUED)) {
I802_DEBUG_INC(tx->local->tx_handlers_queued);
*/
void ieee80211_clear_tx_pending(struct ieee80211_local *local)
{
+ struct sk_buff *skb;
int i;
- for (i = 0; i < local->hw.queues; i++)
- skb_queue_purge(&local->pending[i]);
+ for (i = 0; i < local->hw.queues; i++) {
+ while ((skb = skb_dequeue(&local->pending[i])) != NULL)
+ ieee80211_free_txskb(&local->hw, skb);
+ }
}
/*
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_STATION)
continue;
+ if (!sdata->u.mgd.associated)
+ continue;
ieee80211_send_nullfunc(local, sdata, 0);
}
return adtfn(set, &nip, timeout, flags);
}
+ ip_to = ip;
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
hosts = h->netmask == 32 ? 1 : 2 << (32 - h->netmask - 1);
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipport4_elem data = { };
- u32 ip, ip_to = 0, p = 0, port, port_to;
+ u32 ip, ip_to, p = 0, port, port_to;
u32 timeout = h->timeout;
bool with_ports = false;
int ret;
return ip_set_eexist(ret, flags) ? 0 : ret;
}
- ip = ntohl(data.ip);
+ ip_to = ip = ntohl(data.ip);
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
port_to = port = ntohs(data.port);
if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipportip4_elem data = { };
- u32 ip, ip_to = 0, p = 0, port, port_to;
+ u32 ip, ip_to, p = 0, port, port_to;
u32 timeout = h->timeout;
bool with_ports = false;
int ret;
return ip_set_eexist(ret, flags) ? 0 : ret;
}
- ip = ntohl(data.ip);
+ ip_to = ip = ntohl(data.ip);
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
port_to = port = ntohs(data.port);
if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipportnet4_elem data = { .cidr = HOST_MASK - 1 };
- u32 ip, ip_to = 0, p = 0, port, port_to;
- u32 ip2_from = 0, ip2_to, ip2_last, ip2;
+ u32 ip, ip_to, p = 0, port, port_to;
+ u32 ip2_from, ip2_to, ip2_last, ip2;
u32 timeout = h->timeout;
bool with_ports = false;
u8 cidr;
return ip_set_eexist(ret, flags) ? 0 : ret;
}
+ ip_to = ip;
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
if (port > port_to)
swap(port, port_to);
}
+
+ ip2_to = ip2_from;
if (tb[IPSET_ATTR_IP2_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP2_TO], &ip2_to);
if (ret)
static LIST_HEAD(cttimeout_list);
static const struct nla_policy cttimeout_nla_policy[CTA_TIMEOUT_MAX+1] = {
- [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING },
+ [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING,
+ .len = CTNL_TIMEOUT_NAME_MAX - 1},
[CTA_TIMEOUT_L3PROTO] = { .type = NLA_U16 },
[CTA_TIMEOUT_L4PROTO] = { .type = NLA_U8 },
[CTA_TIMEOUT_DATA] = { .type = NLA_NESTED },
local->remote_miu = LLCP_DEFAULT_MIU;
local->remote_lto = LLCP_DEFAULT_LTO;
- list_add(&llcp_devices, &local->list);
+ list_add(&local->list, &llcp_devices);
return 0;
}
.open = sctp_snmp_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = single_release_net,
};
/* Set up the proc fs entry for 'snmp' object. */
.open = sctp_eps_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
/* Set up the proc fs entry for 'eps' object. */
.open = sctp_assocs_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
/* Set up the proc fs entry for 'assocs' object. */
.open = sctp_remaddr_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
int __net_init sctp_remaddr_proc_init(struct net *net)
.reg_rules = {
/* IEEE 802.11b/g, channels 1..11 */
REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
- /* IEEE 802.11b/g, channels 12..13. No HT40
- * channel fits here. */
- REG_RULE(2467-10, 2472+10, 20, 6, 20,
+ /* IEEE 802.11b/g, channels 12..13. */
+ REG_RULE(2467-10, 2472+10, 40, 6, 20,
NL80211_RRF_PASSIVE_SCAN |
NL80211_RRF_NO_IBSS),
/* IEEE 802.11 channel 14 - Only JP enables
#include <assert.h>
#include <stdio.h>
-#include <sys/queue.h>
+#include "list.h"
#ifndef __cplusplus
#include <stdbool.h>
#endif
#define MENU_ROOT 0x0002
struct jump_key {
- CIRCLEQ_ENTRY(jump_key) entries;
+ struct list_head entries;
size_t offset;
struct menu *target;
int index;
};
-CIRCLEQ_HEAD(jk_head, jump_key);
#define JUMP_NB 9
--- /dev/null
+#ifndef LIST_H
+#define LIST_H
+
+/*
+ * Copied from include/linux/...
+ */
+
+#undef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+ struct list_head name = LIST_HEAD_INIT(name)
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+ container_of(ptr, type, member)
+
+/**
+ * list_for_each_entry - iterate over list of given type
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+ return head->next == head;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *_new,
+ struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = _new;
+ _new->next = next;
+ _new->prev = prev;
+ prev->next = _new;
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *_new, struct list_head *head)
+{
+ __list_add(_new, head->prev, head);
+}
+
+#endif
P(menu_get_parent_menu,struct menu *,(struct menu *menu));
P(menu_has_help,bool,(struct menu *menu));
P(menu_get_help,const char *,(struct menu *menu));
-P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct jk_head
+P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head
*head));
-P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct jk_head
+P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head
*head));
P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
struct search_data {
- struct jk_head *head;
+ struct list_head *head;
struct menu **targets;
int *keys;
};
struct jump_key *pos;
int k = 0;
- CIRCLEQ_FOREACH(pos, data->head, entries) {
+ list_for_each_entry(pos, data->head, entries) {
if (pos->offset >= start && pos->offset < end) {
char header[4];
sym_arr = sym_re_search(dialog_input);
do {
- struct jk_head head = CIRCLEQ_HEAD_INITIALIZER(head);
+ LIST_HEAD(head);
struct menu *targets[JUMP_NB];
int keys[JUMP_NB + 1], i;
struct search_data data = {
}
static void get_prompt_str(struct gstr *r, struct property *prop,
- struct jk_head *head)
+ struct list_head *head)
{
int i, j;
struct menu *submenu[8], *menu, *location = NULL;
} else
jump->target = location;
- if (CIRCLEQ_EMPTY(head))
+ if (list_empty(head))
jump->index = 0;
else
- jump->index = CIRCLEQ_LAST(head)->index + 1;
+ jump->index = list_entry(head->prev, struct jump_key,
+ entries)->index + 1;
- CIRCLEQ_INSERT_TAIL(head, jump, entries);
+ list_add_tail(&jump->entries, head);
}
if (i > 0) {
/*
* head is optional and may be NULL
*/
-void get_symbol_str(struct gstr *r, struct symbol *sym, struct jk_head *head)
+void get_symbol_str(struct gstr *r, struct symbol *sym,
+ struct list_head *head)
{
bool hit;
struct property *prop;
str_append(r, "\n\n");
}
-struct gstr get_relations_str(struct symbol **sym_arr, struct jk_head *head)
+struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head)
{
struct symbol *sym;
struct gstr res = str_new();
if ($l == 0x1) {
$len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1));
- } elsif ($l = 0x2) {
+ } elsif ($l == 0x2) {
$len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2));
- } elsif ($l = 0x3) {
+ } elsif ($l == 0x3) {
$len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16;
$len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2));
- } elsif ($l = 0x4) {
+ } elsif ($l == 0x4) {
$len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4));
} else {
die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n";
struct dev_exception_item *ex, *tmp;
list_for_each_entry_safe(ex, tmp, &dev_cgroup->exceptions, list) {
- list_del(&ex->list);
- kfree(ex);
+ list_del_rcu(&ex->list);
+ kfree_rcu(ex, rcu);
}
}
struct dev_exception_item *ex;
bool match = false;
- list_for_each_entry(ex, &dev_cgroup->exceptions, list) {
+ list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
*/
static inline int may_allow_all(struct dev_cgroup *parent)
{
+ if (!parent)
+ return 1;
return parent->behavior == DEVCG_DEFAULT_ALLOW;
}
int count, rc;
struct dev_exception_item ex;
struct cgroup *p = devcgroup->css.cgroup;
- struct dev_cgroup *parent = cgroup_to_devcgroup(p->parent);
+ struct dev_cgroup *parent = NULL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (p->parent)
+ parent = cgroup_to_devcgroup(p->parent);
+
memset(&ex, 0, sizeof(ex));
b = buffer;
if (!may_allow_all(parent))
return -EPERM;
dev_exception_clean(devcgroup);
+ devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
+ if (!parent)
+ break;
+
rc = dev_exceptions_copy(&devcgroup->exceptions,
&parent->exceptions);
if (rc)
return rc;
- devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
break;
case DEVCG_DENY:
dev_exception_clean(devcgroup);
if (sel_netnode_hash[idx].size == SEL_NETNODE_HASH_BKT_LIMIT) {
struct sel_netnode *tail;
tail = list_entry(
- rcu_dereference(sel_netnode_hash[idx].list.prev),
+ rcu_dereference_protected(sel_netnode_hash[idx].list.prev,
+ lockdep_is_held(&sel_netnode_lock)),
struct sel_netnode, list);
list_del_rcu(&tail->list);
kfree_rcu(tail, rcu);
struct es1968 *chip = tea->private_data;
unsigned long io = chip->io_port + GPIO_DATA;
u16 val = inw(io);
-
- return (val & STR_DATA) ? TEA575X_DATA : 0 |
- (val & STR_MOST) ? TEA575X_MOST : 0;
+ u8 ret;
+
+ ret = 0;
+ if (val & STR_DATA)
+ ret |= TEA575X_DATA;
+ if (val & STR_MOST)
+ ret |= TEA575X_MOST;
+ return ret;
}
static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool output)
struct fm801 *chip = tea->private_data;
unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
-
- return (reg & FM801_GPIO_GP(gpio.data)) ? TEA575X_DATA : 0 |
- (reg & FM801_GPIO_GP(gpio.most)) ? TEA575X_MOST : 0;
+ u8 ret;
+
+ ret = 0;
+ if (reg & FM801_GPIO_GP(gpio.data))
+ ret |= TEA575X_DATA;
+ if (reg & FM801_GPIO_GP(gpio.most))
+ ret |= TEA575X_MOST;
+ return ret;
}
static void snd_fm801_tea575x_set_direction(struct snd_tea575x *tea, bool output)
EXPORT_SYMBOL_HDA(snd_hda_delete_codec_preset);
#ifdef CONFIG_PM
+#define codec_in_pm(codec) ((codec)->in_pm)
static void hda_power_work(struct work_struct *work);
static void hda_keep_power_on(struct hda_codec *codec);
#define hda_codec_is_power_on(codec) ((codec)->power_on)
bus->ops.pm_notify(bus, power_up);
}
#else
+#define codec_in_pm(codec) 0
static inline void hda_keep_power_on(struct hda_codec *codec) {}
#define hda_codec_is_power_on(codec) 1
#define hda_call_pm_notify(bus, state) {}
}
mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
- if (res && *res == -1 && bus->rirb_error) {
+ if (!codec_in_pm(codec) && res && *res == -1 && bus->rirb_error) {
if (bus->response_reset) {
snd_printd("hda_codec: resetting BUS due to "
"fatal communication error\n");
goto again;
}
/* clear reset-flag when the communication gets recovered */
- if (!err)
+ if (!err || codec_in_pm(codec))
bus->response_reset = 0;
return err;
}
{
unsigned int state;
+ codec->in_pm = 1;
+
if (codec->patch_ops.suspend)
codec->patch_ops.suspend(codec);
hda_cleanup_all_streams(codec);
codec->power_transition = 0;
codec->power_jiffies = jiffies;
spin_unlock(&codec->power_lock);
+ codec->in_pm = 0;
return state;
}
*/
static void hda_call_codec_resume(struct hda_codec *codec)
{
+ codec->in_pm = 1;
+
/* set as if powered on for avoiding re-entering the resume
* in the resume / power-save sequence
*/
snd_hda_codec_resume_cache(codec);
}
snd_hda_jack_report_sync(codec);
+
+ codec->in_pm = 0;
snd_hda_power_down(codec); /* flag down before returning */
}
#endif /* CONFIG_PM */
unsigned int power_on :1; /* current (global) power-state */
unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */
unsigned int pm_down_notified:1; /* PM notified to controller */
+ unsigned int in_pm:1; /* suspend/resume being performed */
int power_transition; /* power-state in transition */
int power_count; /* current (global) power refcount */
struct delayed_work power_work; /* delayed task for powerdown */
#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */
#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
+#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
+
+/* quirks for Intel PCH */
+#define AZX_DCAPS_INTEL_PCH \
+ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
+ AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME)
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
{
struct azx *chip = bus->private_data;
+ if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
+ return;
+
if (power_up)
pm_runtime_get_sync(&chip->pci->dev);
else
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (!power_save_controller)
+ if (!power_save_controller ||
+ !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EAGAIN;
azx_stop_chip(chip);
static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE},
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c21),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0c0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
{ PCI_DEVICE(0x8086, 0x0d0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* 5 Series/3400 */
{ PCI_DEVICE(0x8086, 0x3b56),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
memcpy(cfg->speaker_pins, cfg->line_out_pins,
sizeof(cfg->speaker_pins));
cfg->line_outs = 0;
+ memset(cfg->line_out_pins, 0, sizeof(cfg->line_out_pins));
}
return 0;
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO),
+ SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_IMAC91_VREF),
{ .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 },
{ .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 },
{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
+ { .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
static unsigned int arizona_sysclk_48k_rates[] = {
6144000,
12288000,
- 22579200,
+ 24576000,
49152000,
73728000,
98304000,
static unsigned int arizona_sysclk_44k1_rates[] = {
5644800,
11289600,
- 24576000,
+ 22579200,
45158400,
67737600,
90316800,
gpio_nreset = cs4271plat->gpio_nreset;
if (gpio_nreset >= 0)
- if (gpio_request(gpio_nreset, "CS4271 Reset"))
+ if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
gpio_nreset = -EINVAL;
if (gpio_nreset >= 0) {
/* Reset codec */
static int cs4271_remove(struct snd_soc_codec *codec)
{
struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
- int gpio_nreset;
- gpio_nreset = cs4271->gpio_nreset;
-
- if (gpio_is_valid(gpio_nreset)) {
+ if (gpio_is_valid(cs4271->gpio_nreset))
/* Set codec to the reset state */
- gpio_set_value(gpio_nreset, 0);
- gpio_free(gpio_nreset);
- }
+ gpio_set_value(cs4271->gpio_nreset, 0);
return 0;
};
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs42l52_private *cs42l52 = snd_soc_codec_get_drvdata(codec);
- int ret = 0;
u8 iface = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_NB_IF:
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
cs42l52->config.format = iface;
snd_soc_write(codec, CS42L52_IFACE_CTL1, cs42l52->config.format);
static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
+static const struct reg_default wm5102_sysclk_reva_patch[] = {
+ { 0x3000, 0x2225 },
+ { 0x3001, 0x3a03 },
+ { 0x3002, 0x0225 },
+ { 0x3003, 0x0801 },
+ { 0x3004, 0x6249 },
+ { 0x3005, 0x0c04 },
+ { 0x3006, 0x0225 },
+ { 0x3007, 0x5901 },
+ { 0x3008, 0xe249 },
+ { 0x3009, 0x030d },
+ { 0x300a, 0x0249 },
+ { 0x300b, 0x2c01 },
+ { 0x300c, 0xe249 },
+ { 0x300d, 0x4342 },
+ { 0x300e, 0xe249 },
+ { 0x300f, 0x73c0 },
+ { 0x3010, 0x4249 },
+ { 0x3011, 0x0c00 },
+ { 0x3012, 0x0225 },
+ { 0x3013, 0x1f01 },
+ { 0x3014, 0x0225 },
+ { 0x3015, 0x1e01 },
+ { 0x3016, 0x0225 },
+ { 0x3017, 0xfa00 },
+ { 0x3018, 0x0000 },
+ { 0x3019, 0xf000 },
+ { 0x301a, 0x0000 },
+ { 0x301b, 0xf000 },
+ { 0x301c, 0x0000 },
+ { 0x301d, 0xf000 },
+ { 0x301e, 0x0000 },
+ { 0x301f, 0xf000 },
+ { 0x3020, 0x0000 },
+ { 0x3021, 0xf000 },
+ { 0x3022, 0x0000 },
+ { 0x3023, 0xf000 },
+ { 0x3024, 0x0000 },
+ { 0x3025, 0xf000 },
+ { 0x3026, 0x0000 },
+ { 0x3027, 0xf000 },
+ { 0x3028, 0x0000 },
+ { 0x3029, 0xf000 },
+ { 0x302a, 0x0000 },
+ { 0x302b, 0xf000 },
+ { 0x302c, 0x0000 },
+ { 0x302d, 0xf000 },
+ { 0x302e, 0x0000 },
+ { 0x302f, 0xf000 },
+ { 0x3030, 0x0225 },
+ { 0x3031, 0x1a01 },
+ { 0x3032, 0x0225 },
+ { 0x3033, 0x1e00 },
+ { 0x3034, 0x0225 },
+ { 0x3035, 0x1f00 },
+ { 0x3036, 0x6225 },
+ { 0x3037, 0xf800 },
+ { 0x3038, 0x0000 },
+ { 0x3039, 0xf000 },
+ { 0x303a, 0x0000 },
+ { 0x303b, 0xf000 },
+ { 0x303c, 0x0000 },
+ { 0x303d, 0xf000 },
+ { 0x303e, 0x0000 },
+ { 0x303f, 0xf000 },
+ { 0x3040, 0x2226 },
+ { 0x3041, 0x3a03 },
+ { 0x3042, 0x0226 },
+ { 0x3043, 0x0801 },
+ { 0x3044, 0x6249 },
+ { 0x3045, 0x0c06 },
+ { 0x3046, 0x0226 },
+ { 0x3047, 0x5901 },
+ { 0x3048, 0xe249 },
+ { 0x3049, 0x030d },
+ { 0x304a, 0x0249 },
+ { 0x304b, 0x2c01 },
+ { 0x304c, 0xe249 },
+ { 0x304d, 0x4342 },
+ { 0x304e, 0xe249 },
+ { 0x304f, 0x73c0 },
+ { 0x3050, 0x4249 },
+ { 0x3051, 0x0c00 },
+ { 0x3052, 0x0226 },
+ { 0x3053, 0x1f01 },
+ { 0x3054, 0x0226 },
+ { 0x3055, 0x1e01 },
+ { 0x3056, 0x0226 },
+ { 0x3057, 0xfa00 },
+ { 0x3058, 0x0000 },
+ { 0x3059, 0xf000 },
+ { 0x305a, 0x0000 },
+ { 0x305b, 0xf000 },
+ { 0x305c, 0x0000 },
+ { 0x305d, 0xf000 },
+ { 0x305e, 0x0000 },
+ { 0x305f, 0xf000 },
+ { 0x3060, 0x0000 },
+ { 0x3061, 0xf000 },
+ { 0x3062, 0x0000 },
+ { 0x3063, 0xf000 },
+ { 0x3064, 0x0000 },
+ { 0x3065, 0xf000 },
+ { 0x3066, 0x0000 },
+ { 0x3067, 0xf000 },
+ { 0x3068, 0x0000 },
+ { 0x3069, 0xf000 },
+ { 0x306a, 0x0000 },
+ { 0x306b, 0xf000 },
+ { 0x306c, 0x0000 },
+ { 0x306d, 0xf000 },
+ { 0x306e, 0x0000 },
+ { 0x306f, 0xf000 },
+ { 0x3070, 0x0226 },
+ { 0x3071, 0x1a01 },
+ { 0x3072, 0x0226 },
+ { 0x3073, 0x1e00 },
+ { 0x3074, 0x0226 },
+ { 0x3075, 0x1f00 },
+ { 0x3076, 0x6226 },
+ { 0x3077, 0xf800 },
+ { 0x3078, 0x0000 },
+ { 0x3079, 0xf000 },
+ { 0x307a, 0x0000 },
+ { 0x307b, 0xf000 },
+ { 0x307c, 0x0000 },
+ { 0x307d, 0xf000 },
+ { 0x307e, 0x0000 },
+ { 0x307f, 0xf000 },
+ { 0x3080, 0x2227 },
+ { 0x3081, 0x3a03 },
+ { 0x3082, 0x0227 },
+ { 0x3083, 0x0801 },
+ { 0x3084, 0x6255 },
+ { 0x3085, 0x0c04 },
+ { 0x3086, 0x0227 },
+ { 0x3087, 0x5901 },
+ { 0x3088, 0xe255 },
+ { 0x3089, 0x030d },
+ { 0x308a, 0x0255 },
+ { 0x308b, 0x2c01 },
+ { 0x308c, 0xe255 },
+ { 0x308d, 0x4342 },
+ { 0x308e, 0xe255 },
+ { 0x308f, 0x73c0 },
+ { 0x3090, 0x4255 },
+ { 0x3091, 0x0c00 },
+ { 0x3092, 0x0227 },
+ { 0x3093, 0x1f01 },
+ { 0x3094, 0x0227 },
+ { 0x3095, 0x1e01 },
+ { 0x3096, 0x0227 },
+ { 0x3097, 0xfa00 },
+ { 0x3098, 0x0000 },
+ { 0x3099, 0xf000 },
+ { 0x309a, 0x0000 },
+ { 0x309b, 0xf000 },
+ { 0x309c, 0x0000 },
+ { 0x309d, 0xf000 },
+ { 0x309e, 0x0000 },
+ { 0x309f, 0xf000 },
+ { 0x30a0, 0x0000 },
+ { 0x30a1, 0xf000 },
+ { 0x30a2, 0x0000 },
+ { 0x30a3, 0xf000 },
+ { 0x30a4, 0x0000 },
+ { 0x30a5, 0xf000 },
+ { 0x30a6, 0x0000 },
+ { 0x30a7, 0xf000 },
+ { 0x30a8, 0x0000 },
+ { 0x30a9, 0xf000 },
+ { 0x30aa, 0x0000 },
+ { 0x30ab, 0xf000 },
+ { 0x30ac, 0x0000 },
+ { 0x30ad, 0xf000 },
+ { 0x30ae, 0x0000 },
+ { 0x30af, 0xf000 },
+ { 0x30b0, 0x0227 },
+ { 0x30b1, 0x1a01 },
+ { 0x30b2, 0x0227 },
+ { 0x30b3, 0x1e00 },
+ { 0x30b4, 0x0227 },
+ { 0x30b5, 0x1f00 },
+ { 0x30b6, 0x6227 },
+ { 0x30b7, 0xf800 },
+ { 0x30b8, 0x0000 },
+ { 0x30b9, 0xf000 },
+ { 0x30ba, 0x0000 },
+ { 0x30bb, 0xf000 },
+ { 0x30bc, 0x0000 },
+ { 0x30bd, 0xf000 },
+ { 0x30be, 0x0000 },
+ { 0x30bf, 0xf000 },
+ { 0x30c0, 0x2228 },
+ { 0x30c1, 0x3a03 },
+ { 0x30c2, 0x0228 },
+ { 0x30c3, 0x0801 },
+ { 0x30c4, 0x6255 },
+ { 0x30c5, 0x0c06 },
+ { 0x30c6, 0x0228 },
+ { 0x30c7, 0x5901 },
+ { 0x30c8, 0xe255 },
+ { 0x30c9, 0x030d },
+ { 0x30ca, 0x0255 },
+ { 0x30cb, 0x2c01 },
+ { 0x30cc, 0xe255 },
+ { 0x30cd, 0x4342 },
+ { 0x30ce, 0xe255 },
+ { 0x30cf, 0x73c0 },
+ { 0x30d0, 0x4255 },
+ { 0x30d1, 0x0c00 },
+ { 0x30d2, 0x0228 },
+ { 0x30d3, 0x1f01 },
+ { 0x30d4, 0x0228 },
+ { 0x30d5, 0x1e01 },
+ { 0x30d6, 0x0228 },
+ { 0x30d7, 0xfa00 },
+ { 0x30d8, 0x0000 },
+ { 0x30d9, 0xf000 },
+ { 0x30da, 0x0000 },
+ { 0x30db, 0xf000 },
+ { 0x30dc, 0x0000 },
+ { 0x30dd, 0xf000 },
+ { 0x30de, 0x0000 },
+ { 0x30df, 0xf000 },
+ { 0x30e0, 0x0000 },
+ { 0x30e1, 0xf000 },
+ { 0x30e2, 0x0000 },
+ { 0x30e3, 0xf000 },
+ { 0x30e4, 0x0000 },
+ { 0x30e5, 0xf000 },
+ { 0x30e6, 0x0000 },
+ { 0x30e7, 0xf000 },
+ { 0x30e8, 0x0000 },
+ { 0x30e9, 0xf000 },
+ { 0x30ea, 0x0000 },
+ { 0x30eb, 0xf000 },
+ { 0x30ec, 0x0000 },
+ { 0x30ed, 0xf000 },
+ { 0x30ee, 0x0000 },
+ { 0x30ef, 0xf000 },
+ { 0x30f0, 0x0228 },
+ { 0x30f1, 0x1a01 },
+ { 0x30f2, 0x0228 },
+ { 0x30f3, 0x1e00 },
+ { 0x30f4, 0x0228 },
+ { 0x30f5, 0x1f00 },
+ { 0x30f6, 0x6228 },
+ { 0x30f7, 0xf800 },
+ { 0x30f8, 0x0000 },
+ { 0x30f9, 0xf000 },
+ { 0x30fa, 0x0000 },
+ { 0x30fb, 0xf000 },
+ { 0x30fc, 0x0000 },
+ { 0x30fd, 0xf000 },
+ { 0x30fe, 0x0000 },
+ { 0x30ff, 0xf000 },
+ { 0x3100, 0x222b },
+ { 0x3101, 0x3a03 },
+ { 0x3102, 0x222b },
+ { 0x3103, 0x5803 },
+ { 0x3104, 0xe26f },
+ { 0x3105, 0x030d },
+ { 0x3106, 0x626f },
+ { 0x3107, 0x2c01 },
+ { 0x3108, 0xe26f },
+ { 0x3109, 0x4342 },
+ { 0x310a, 0xe26f },
+ { 0x310b, 0x73c0 },
+ { 0x310c, 0x026f },
+ { 0x310d, 0x0c00 },
+ { 0x310e, 0x022b },
+ { 0x310f, 0x1f01 },
+ { 0x3110, 0x022b },
+ { 0x3111, 0x1e01 },
+ { 0x3112, 0x022b },
+ { 0x3113, 0xfa00 },
+ { 0x3114, 0x0000 },
+ { 0x3115, 0xf000 },
+ { 0x3116, 0x0000 },
+ { 0x3117, 0xf000 },
+ { 0x3118, 0x0000 },
+ { 0x3119, 0xf000 },
+ { 0x311a, 0x0000 },
+ { 0x311b, 0xf000 },
+ { 0x311c, 0x0000 },
+ { 0x311d, 0xf000 },
+ { 0x311e, 0x0000 },
+ { 0x311f, 0xf000 },
+ { 0x3120, 0x022b },
+ { 0x3121, 0x0a01 },
+ { 0x3122, 0x022b },
+ { 0x3123, 0x1e00 },
+ { 0x3124, 0x022b },
+ { 0x3125, 0x1f00 },
+ { 0x3126, 0x622b },
+ { 0x3127, 0xf800 },
+ { 0x3128, 0x0000 },
+ { 0x3129, 0xf000 },
+ { 0x312a, 0x0000 },
+ { 0x312b, 0xf000 },
+ { 0x312c, 0x0000 },
+ { 0x312d, 0xf000 },
+ { 0x312e, 0x0000 },
+ { 0x312f, 0xf000 },
+ { 0x3130, 0x0000 },
+ { 0x3131, 0xf000 },
+ { 0x3132, 0x0000 },
+ { 0x3133, 0xf000 },
+ { 0x3134, 0x0000 },
+ { 0x3135, 0xf000 },
+ { 0x3136, 0x0000 },
+ { 0x3137, 0xf000 },
+ { 0x3138, 0x0000 },
+ { 0x3139, 0xf000 },
+ { 0x313a, 0x0000 },
+ { 0x313b, 0xf000 },
+ { 0x313c, 0x0000 },
+ { 0x313d, 0xf000 },
+ { 0x313e, 0x0000 },
+ { 0x313f, 0xf000 },
+ { 0x3140, 0x0000 },
+ { 0x3141, 0xf000 },
+ { 0x3142, 0x0000 },
+ { 0x3143, 0xf000 },
+ { 0x3144, 0x0000 },
+ { 0x3145, 0xf000 },
+ { 0x3146, 0x0000 },
+ { 0x3147, 0xf000 },
+ { 0x3148, 0x0000 },
+ { 0x3149, 0xf000 },
+ { 0x314a, 0x0000 },
+ { 0x314b, 0xf000 },
+ { 0x314c, 0x0000 },
+ { 0x314d, 0xf000 },
+ { 0x314e, 0x0000 },
+ { 0x314f, 0xf000 },
+ { 0x3150, 0x0000 },
+ { 0x3151, 0xf000 },
+ { 0x3152, 0x0000 },
+ { 0x3153, 0xf000 },
+ { 0x3154, 0x0000 },
+ { 0x3155, 0xf000 },
+ { 0x3156, 0x0000 },
+ { 0x3157, 0xf000 },
+ { 0x3158, 0x0000 },
+ { 0x3159, 0xf000 },
+ { 0x315a, 0x0000 },
+ { 0x315b, 0xf000 },
+ { 0x315c, 0x0000 },
+ { 0x315d, 0xf000 },
+ { 0x315e, 0x0000 },
+ { 0x315f, 0xf000 },
+ { 0x3160, 0x0000 },
+ { 0x3161, 0xf000 },
+ { 0x3162, 0x0000 },
+ { 0x3163, 0xf000 },
+ { 0x3164, 0x0000 },
+ { 0x3165, 0xf000 },
+ { 0x3166, 0x0000 },
+ { 0x3167, 0xf000 },
+ { 0x3168, 0x0000 },
+ { 0x3169, 0xf000 },
+ { 0x316a, 0x0000 },
+ { 0x316b, 0xf000 },
+ { 0x316c, 0x0000 },
+ { 0x316d, 0xf000 },
+ { 0x316e, 0x0000 },
+ { 0x316f, 0xf000 },
+ { 0x3170, 0x0000 },
+ { 0x3171, 0xf000 },
+ { 0x3172, 0x0000 },
+ { 0x3173, 0xf000 },
+ { 0x3174, 0x0000 },
+ { 0x3175, 0xf000 },
+ { 0x3176, 0x0000 },
+ { 0x3177, 0xf000 },
+ { 0x3178, 0x0000 },
+ { 0x3179, 0xf000 },
+ { 0x317a, 0x0000 },
+ { 0x317b, 0xf000 },
+ { 0x317c, 0x0000 },
+ { 0x317d, 0xf000 },
+ { 0x317e, 0x0000 },
+ { 0x317f, 0xf000 },
+ { 0x3180, 0x2001 },
+ { 0x3181, 0xf101 },
+ { 0x3182, 0x0000 },
+ { 0x3183, 0xf000 },
+ { 0x3184, 0x0000 },
+ { 0x3185, 0xf000 },
+ { 0x3186, 0x0000 },
+ { 0x3187, 0xf000 },
+ { 0x3188, 0x0000 },
+ { 0x3189, 0xf000 },
+ { 0x318a, 0x0000 },
+ { 0x318b, 0xf000 },
+ { 0x318c, 0x0000 },
+ { 0x318d, 0xf000 },
+ { 0x318e, 0x0000 },
+ { 0x318f, 0xf000 },
+ { 0x3190, 0x0000 },
+ { 0x3191, 0xf000 },
+ { 0x3192, 0x0000 },
+ { 0x3193, 0xf000 },
+ { 0x3194, 0x0000 },
+ { 0x3195, 0xf000 },
+ { 0x3196, 0x0000 },
+ { 0x3197, 0xf000 },
+ { 0x3198, 0x0000 },
+ { 0x3199, 0xf000 },
+ { 0x319a, 0x0000 },
+ { 0x319b, 0xf000 },
+ { 0x319c, 0x0000 },
+ { 0x319d, 0xf000 },
+ { 0x319e, 0x0000 },
+ { 0x319f, 0xf000 },
+ { 0x31a0, 0x0000 },
+ { 0x31a1, 0xf000 },
+ { 0x31a2, 0x0000 },
+ { 0x31a3, 0xf000 },
+ { 0x31a4, 0x0000 },
+ { 0x31a5, 0xf000 },
+ { 0x31a6, 0x0000 },
+ { 0x31a7, 0xf000 },
+ { 0x31a8, 0x0000 },
+ { 0x31a9, 0xf000 },
+ { 0x31aa, 0x0000 },
+ { 0x31ab, 0xf000 },
+ { 0x31ac, 0x0000 },
+ { 0x31ad, 0xf000 },
+ { 0x31ae, 0x0000 },
+ { 0x31af, 0xf000 },
+ { 0x31b0, 0x0000 },
+ { 0x31b1, 0xf000 },
+ { 0x31b2, 0x0000 },
+ { 0x31b3, 0xf000 },
+ { 0x31b4, 0x0000 },
+ { 0x31b5, 0xf000 },
+ { 0x31b6, 0x0000 },
+ { 0x31b7, 0xf000 },
+ { 0x31b8, 0x0000 },
+ { 0x31b9, 0xf000 },
+ { 0x31ba, 0x0000 },
+ { 0x31bb, 0xf000 },
+ { 0x31bc, 0x0000 },
+ { 0x31bd, 0xf000 },
+ { 0x31be, 0x0000 },
+ { 0x31bf, 0xf000 },
+ { 0x31c0, 0x0000 },
+ { 0x31c1, 0xf000 },
+ { 0x31c2, 0x0000 },
+ { 0x31c3, 0xf000 },
+ { 0x31c4, 0x0000 },
+ { 0x31c5, 0xf000 },
+ { 0x31c6, 0x0000 },
+ { 0x31c7, 0xf000 },
+ { 0x31c8, 0x0000 },
+ { 0x31c9, 0xf000 },
+ { 0x31ca, 0x0000 },
+ { 0x31cb, 0xf000 },
+ { 0x31cc, 0x0000 },
+ { 0x31cd, 0xf000 },
+ { 0x31ce, 0x0000 },
+ { 0x31cf, 0xf000 },
+ { 0x31d0, 0x0000 },
+ { 0x31d1, 0xf000 },
+ { 0x31d2, 0x0000 },
+ { 0x31d3, 0xf000 },
+ { 0x31d4, 0x0000 },
+ { 0x31d5, 0xf000 },
+ { 0x31d6, 0x0000 },
+ { 0x31d7, 0xf000 },
+ { 0x31d8, 0x0000 },
+ { 0x31d9, 0xf000 },
+ { 0x31da, 0x0000 },
+ { 0x31db, 0xf000 },
+ { 0x31dc, 0x0000 },
+ { 0x31dd, 0xf000 },
+ { 0x31de, 0x0000 },
+ { 0x31df, 0xf000 },
+ { 0x31e0, 0x0000 },
+ { 0x31e1, 0xf000 },
+ { 0x31e2, 0x0000 },
+ { 0x31e3, 0xf000 },
+ { 0x31e4, 0x0000 },
+ { 0x31e5, 0xf000 },
+ { 0x31e6, 0x0000 },
+ { 0x31e7, 0xf000 },
+ { 0x31e8, 0x0000 },
+ { 0x31e9, 0xf000 },
+ { 0x31ea, 0x0000 },
+ { 0x31eb, 0xf000 },
+ { 0x31ec, 0x0000 },
+ { 0x31ed, 0xf000 },
+ { 0x31ee, 0x0000 },
+ { 0x31ef, 0xf000 },
+ { 0x31f0, 0x0000 },
+ { 0x31f1, 0xf000 },
+ { 0x31f2, 0x0000 },
+ { 0x31f3, 0xf000 },
+ { 0x31f4, 0x0000 },
+ { 0x31f5, 0xf000 },
+ { 0x31f6, 0x0000 },
+ { 0x31f7, 0xf000 },
+ { 0x31f8, 0x0000 },
+ { 0x31f9, 0xf000 },
+ { 0x31fa, 0x0000 },
+ { 0x31fb, 0xf000 },
+ { 0x31fc, 0x0000 },
+ { 0x31fd, 0xf000 },
+ { 0x31fe, 0x0000 },
+ { 0x31ff, 0xf000 },
+ { 0x024d, 0xff50 },
+ { 0x0252, 0xff50 },
+ { 0x0259, 0x0112 },
+ { 0x025e, 0x0112 },
+};
+
+static int wm5102_sysclk_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct arizona *arizona = dev_get_drvdata(codec->dev);
+ struct regmap *regmap = codec->control_data;
+ const struct reg_default *patch = NULL;
+ int i, patch_size;
+
+ switch (arizona->rev) {
+ case 0:
+ patch = wm5102_sysclk_reva_patch;
+ patch_size = ARRAY_SIZE(wm5102_sysclk_reva_patch);
+ break;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ if (patch)
+ for (i = 0; i < patch_size; i++)
+ regmap_write(regmap, patch[i].reg,
+ patch[i].def);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static const struct snd_kcontrol_new wm5102_snd_controls[] = {
SOC_SINGLE("IN1 High Performance Switch", ARIZONA_IN1L_CONTROL,
ARIZONA_IN1_OSR_SHIFT, 1, 0),
static const struct snd_soc_dapm_widget wm5102_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("SYSCLK", ARIZONA_SYSTEM_CLOCK_1, ARIZONA_SYSCLK_ENA_SHIFT,
- 0, NULL, 0),
+ 0, wm5102_sysclk_ev, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("ASYNCCLK", ARIZONA_ASYNC_CLOCK_1,
ARIZONA_ASYNC_CLK_ENA_SHIFT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("OPCLK", ARIZONA_OUTPUT_SYSTEM_CLOCK,
wm8978->mclk_idx = -1;
f_sel = wm8978->f_mclk;
} else {
- if (!wm8978->f_pllout) {
+ if (!wm8978->f_opclk) {
/* We only enter here, if OPCLK is not used */
int ret = wm8978_configure_pll(codec);
if (ret < 0)
printk(KERN_WARNING "%s: got err interrupt 0x%lx\n",
__func__, cause);
writel(cause, priv->io + KIRKWOOD_ERR_CAUSE);
- return IRQ_HANDLED;
}
/* we've enabled only bytes interrupts ... */
}
dram = mv_mbus_dram_info();
- addr = virt_to_phys(substream->dma_buffer.area);
+ addr = substream->dma_buffer.addr;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
prdata->play_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
do {
cpu_relax();
value = readl(io + KIRKWOOD_DCO_SPCR_STATUS);
- value &= KIRKWOOD_DCO_SPCR_STATUS;
+ value &= KIRKWOOD_DCO_SPCR_STATUS_DCO_LOCK;
} while (value == 0);
}
int cmd, struct snd_soc_dai *dai)
{
struct kirkwood_dma_data *priv = snd_soc_dai_get_drvdata(dai);
- unsigned long value;
-
- /*
- * specs says KIRKWOOD_PLAYCTL must be read 2 times before
- * changing it. So read 1 time here and 1 later.
- */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
+ uint32_t ctl, value;
+
+ ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+ if (ctl & KIRKWOOD_PLAYCTL_PAUSE) {
+ unsigned timeout = 5000;
+ /*
+ * The Armada510 spec says that if we enter pause mode, the
+ * busy bit must be read back as clear _twice_. Make sure
+ * we respect that otherwise we get DMA underruns.
+ */
+ do {
+ value = ctl;
+ ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+ if (!((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY))
+ break;
+ udelay(1);
+ } while (timeout--);
+
+ if ((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY)
+ dev_notice(dai->dev, "timed out waiting for busy to deassert: %08x\n",
+ ctl);
+ }
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- /* stop audio, enable interrupts */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
-
value = readl(priv->io + KIRKWOOD_INT_MASK);
value |= KIRKWOOD_INT_CAUSE_PLAY_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
/* configure audio & enable i2s playback */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
- value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
+ ctl &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
+ ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
| KIRKWOOD_PLAYCTL_SPDIF_EN);
if (priv->burst == 32)
- value |= KIRKWOOD_PLAYCTL_BURST_32;
+ ctl |= KIRKWOOD_PLAYCTL_BURST_32;
else
- value |= KIRKWOOD_PLAYCTL_BURST_128;
- value |= KIRKWOOD_PLAYCTL_I2S_EN;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_BURST_128;
+ ctl |= KIRKWOOD_PLAYCTL_I2S_EN;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_STOP:
/* stop audio, disable interrupts */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
value = readl(priv->io + KIRKWOOD_INT_MASK);
value &= ~KIRKWOOD_INT_CAUSE_PLAY_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
/* disable all playbacks */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
case SNDRV_PCM_TRIGGER_SUSPEND:
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
default:
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- /* stop audio, enable interrupts */
- value = readl(priv->io + KIRKWOOD_RECCTL);
- value |= KIRKWOOD_RECCTL_PAUSE;
- writel(value, priv->io + KIRKWOOD_RECCTL);
-
value = readl(priv->io + KIRKWOOD_INT_MASK);
value |= KIRKWOOD_INT_CAUSE_REC_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
- * write a data to saif data register to trigger
- * the transfer
+ * write data to saif data register to trigger
+ * the transfer.
+ * For 24-bit format the 32-bit FIFO register stores
+ * only one channel, so we need to write twice.
+ * This is also safe for the other non 24-bit formats.
*/
__raw_writel(0, saif->base + SAIF_DATA);
+ __raw_writel(0, saif->base + SAIF_DATA);
} else {
/*
- * read a data from saif data register to trigger
- * the receive
+ * read data from saif data register to trigger
+ * the receive.
+ * For 24-bit format the 32-bit FIFO register stores
+ * only one channel, so we need to read twice.
+ * This is also safe for the other non 24-bit formats.
*/
__raw_readl(saif->base + SAIF_DATA);
+ __raw_readl(saif->base + SAIF_DATA);
}
master_saif->ongoing = 1;
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXS ASoC SAIF driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-saif");
select SND_SOC_WM5102
select SND_SOC_WM5110
select SND_SOC_WM9081
+ select SND_SOC_WM0010
+ select SND_SOC_WM1250_EV1
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
{
.name = "Sub",
.stream_name = "Sub",
- .cpu_dai_name = "wm5110-aif3",
+ .cpu_dai_name = "wm5102-aif3",
.codec_dai_name = "wm9081-hifi",
.codec_name = "wm9081.1-006c",
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
val = (ucontrol->value.integer.value[0] + min) & mask;
val = val << shift;
- if (snd_soc_update_bits_locked(codec, reg, val_mask, val))
- return err;
+ err = snd_soc_update_bits_locked(codec, reg, val_mask, val);
+ if (err < 0)
+ return err;
if (snd_soc_volsw_is_stereo(mc)) {
val_mask = mask << rshift;
{
struct snd_soc_codec *codec;
- list_for_each_entry(codec, &card->codec_dev_list, list) {
+ list_for_each_entry(codec, &card->codec_dev_list, card_list) {
soc_dapm_shutdown_codec(&codec->dapm);
if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
snd_soc_dapm_set_bias_level(&codec->dapm,
return;
card = chip->card;
- mutex_lock(®ister_mutex);
down_write(&chip->shutdown_rwsem);
chip->shutdown = 1;
+ up_write(&chip->shutdown_rwsem);
+
+ mutex_lock(®ister_mutex);
chip->num_interfaces--;
if (chip->num_interfaces <= 0) {
snd_card_disconnect(card);
snd_usb_mixer_disconnect(p);
}
usb_chip[chip->index] = NULL;
- up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
- up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
}
}
struct snd_usb_midi_out_endpoint* ep;
struct snd_rawmidi_substream *substream;
int active;
+ bool autopm_reference;
uint8_t cable; /* cable number << 4 */
uint8_t state;
#define STATE_UNKNOWN 0
return -ENXIO;
}
err = usb_autopm_get_interface(umidi->iface);
- if (err < 0)
+ port->autopm_reference = err >= 0;
+ if (err < 0 && err != -EACCES)
return -EIO;
substream->runtime->private_data = port;
port->state = STATE_UNKNOWN;
static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
{
struct snd_usb_midi* umidi = substream->rmidi->private_data;
+ struct usbmidi_out_port *port = substream->runtime->private_data;
substream_open(substream, 0);
- usb_autopm_put_interface(umidi->iface);
+ if (port->autopm_reference)
+ usb_autopm_put_interface(umidi->iface);
return 0;
}
return ret;
if (subs->sync_endpoint)
- ret = snd_usb_endpoint_set_params(subs->data_endpoint,
+ ret = snd_usb_endpoint_set_params(subs->sync_endpoint,
subs->pcm_format,
subs->channels,
subs->period_bytes,
retval = pread(fd, msr, sizeof *msr, offset);
close(fd);
- if (retval != sizeof *msr)
+ if (retval != sizeof *msr) {
+ fprintf(stderr, "%s offset 0x%zx read failed\n", pathname, offset);
return -1;
+ }
return 0;
}
restart:
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
}
sleep(interval_sec);
retval = for_all_cpus(get_counters, ODD_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
flush_stdout();
sleep(interval_sec);
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
int fork_it(char **argv)
{
pid_t child_pid;
+ int status;
- for_all_cpus(get_counters, EVEN_COUNTERS);
+ status = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (status)
+ exit(status);
/* clear affinity side-effect of get_counters() */
sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
gettimeofday(&tv_even, (struct timezone *)NULL);
/* child */
execvp(argv[0], argv);
} else {
- int status;
/* parent */
if (child_pid == -1) {
signal(SIGQUIT, SIG_IGN);
if (waitpid(child_pid, &status, 0) == -1) {
perror("wait");
- exit(1);
+ exit(status);
}
}
/*
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
- return 0;
+ return status;
}
void cmdline(int argc, char **argv)
progname = argv[0];
- while ((opt = getopt(argc, argv, "+pPSvisc:sC:m:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+pPSvi:sc:sC:m:M:")) != -1) {
switch (opt) {
case 'p':
show_core_only++;
projects / linux-beck.git / commitdiff