ENGR00171115 mx6_ard: Enable the enet on mx6q ard

Fix Mux config
Need hardware rework:
1. Add R450 10.0k
2. Remove R1105 1k
3. short Pin 1,2 of u516: will impact CAN1

Signed-off-by: Hake Huang <b20222@freescale.com>

diff --git a/arch/arm/mach-mx6/board-mx6q_sabreauto.c b/arch/arm/mach-mx6/board-mx6q_sabreauto.c
index e5dde074e026c77bb2195b8e3baeb638f8e24920..69dd92e17cc973d2ae4a72bc769ea6b8238a6f49 100644 (file)
--- a/arch/arm/mach-mx6/board-mx6q_sabreauto.c
+++ b/arch/arm/mach-mx6/board-mx6q_sabreauto.c
@@ -150,6 +150,8 @@ static iomux_v3_cfg_t mx6q_sabreauto_pads[] = {
        MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2,
        MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3,
        MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL,
+       /*RGMII Phy Interrupt */
+       MX6Q_PAD_GPIO_19__GPIO_4_5,
 #endif
        /* MCLK for csi0 */
        MX6Q_PAD_GPIO_0__CCM_CLKO,
@@ -473,38 +475,23 @@ static inline void mx6q_sabreauto_init_uart(void)
 
 static int mx6q_sabreauto_fec_phy_init(struct phy_device *phydev)
 {
-       unsigned short val;
-
-       /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
-       phy_write(phydev, 0xd, 0x7);
-       phy_write(phydev, 0xe, 0x8016);
-       phy_write(phydev, 0xd, 0x4007);
-       val = phy_read(phydev, 0xe);
+/* prefer master mode, 1000 Base-T capable */
+       phy_write(phydev, 0x9, 0x0f00);
 
-       val &= 0xffe3;
-       val |= 0x18;
-       phy_write(phydev, 0xe, val);
+       /* min rx data delay */
+       phy_write(phydev, 0x0b, 0x8105);
+       phy_write(phydev, 0x0c, 0x0000);
 
-       /* introduce tx clock delay */
-       phy_write(phydev, 0x1d, 0x5);
-       val = phy_read(phydev, 0x1e);
-       val |= 0x0100;
-       phy_write(phydev, 0x1e, val);
+       /* max rx/tx clock delay, min rx/tx control delay */
+       phy_write(phydev, 0x0b, 0x8104);
+       phy_write(phydev, 0x0c, 0xf0f0);
+       phy_write(phydev, 0x0b, 0x104);
 
        return 0;
 }
 
 static int mx6q_sabreauto_fec_power_hibernate(struct phy_device *phydev)
 {
-       unsigned short val;
-
-       /*set AR8031 debug reg 0xb to hibernate power*/
-       phy_write(phydev, 0x1d, 0xb);
-       val = phy_read(phydev, 0x1e);
-
-       val |= 0x8000;
-       phy_write(phydev, 0x1e, val);
-
        return 0;
 }
 
@@ -568,8 +555,17 @@ static int max7310_1_setup(struct i2c_client *client,
        unsigned gpio_base, unsigned ngpio,
        void *context)
 {
+       /* 0 BACKLITE_ON */
+       /* 1 SAT_SHUTDN_B */
+       /* 2 CPU_PER_RST_B */
+       /* 3 MAIN_PER_RST_B */
+       /* 4 IPOD_RST_B */
+       /* 5 MLB_RST_B */
+       /* 6 SSI_STEERING */
+       /* 7 GPS_RST_B */
+
        int max7310_gpio_value[] = {
-               0, 1, 0, 1, 0, 0, 0, 0,
+               0, 1, 1, 1, 0, 0, 0, 0,
        };
 
        int n;
@@ -593,12 +589,21 @@ static struct pca953x_platform_data max7310_platdata = {
        .setup          = max7310_1_setup,
 };
 
-static int max7310_u48_setup(struct i2c_client *client,
+static int max7310_u516_setup(struct i2c_client *client,
        unsigned gpio_base, unsigned ngpio,
        void *context)
 {
+       /* 0 not use  */
+       /* 1 GPS_PWREN */
+       /* 2 VIDEO_ADC_PWRDN_B */
+       /* 3 ENET_CAN1_STEER */
+       /* 4 EIMD30_BTUART3_STEER */
+       /* 5 CAN_STBY */
+       /* 6 CAN_EN */
+       /* 7 USB_H1_PWR */
+
        int max7310_gpio_value[] = {
-               1, 1, 1, 1, 0, 0, 0, 0,
+               0, 0, 0, 0, 0, 0, 0, 0,
        };
 
        int n;
@@ -616,10 +621,10 @@ static int max7310_u48_setup(struct i2c_client *client,
        return 0;
 }
 
-static struct pca953x_platform_data max7310_u48_platdata = {
+static struct pca953x_platform_data max7310_u516_platdata = {
        .gpio_base      = MX6Q_SABREAUTO_MAX7310_2_BASE_ADDR,
        .invert         = 0,
-       .setup          = max7310_u48_setup,
+       .setup          = max7310_u516_setup,
 };
 
 static void ddc_dvi_init(void)
@@ -679,7 +684,7 @@ static struct i2c_board_info mxc_i2c2_board_info[] __initdata = {
        },
        {
                I2C_BOARD_INFO("max7310", 0x32),
-               .platform_data = &max7310_u48_platdata,
+               .platform_data = &max7310_u516_platdata,
        },
        {
                I2C_BOARD_INFO("mxc_dvi", 0x50),