]> git.karo-electronics.de Git - linux-beck.git/commitdiff
bpf: xdp: Allow head adjustment in XDP prog
authorMartin KaFai Lau <kafai@fb.com>
Wed, 7 Dec 2016 23:53:11 +0000 (15:53 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 8 Dec 2016 19:25:13 +0000 (14:25 -0500)
This patch allows XDP prog to extend/remove the packet
data at the head (like adding or removing header).  It is
done by adding a new XDP helper bpf_xdp_adjust_head().

It also renames bpf_helper_changes_skb_data() to
bpf_helper_changes_pkt_data() to better reflect
that XDP prog does not work on skb.

This patch adds one "xdp_adjust_head" bit to bpf_prog for the
XDP-capable driver to check if the XDP prog requires
bpf_xdp_adjust_head() support.  The driver can then decide
to error out during XDP_SETUP_PROG.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 files changed:
arch/powerpc/net/bpf_jit_comp64.c
arch/s390/net/bpf_jit_comp.c
arch/x86/net/bpf_jit_comp.c
drivers/net/ethernet/mellanox/mlx4/en_netdev.c
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
drivers/net/ethernet/netronome/nfp/nfp_net_common.c
drivers/net/ethernet/qlogic/qede/qede_main.c
include/linux/filter.h
include/uapi/linux/bpf.h
kernel/bpf/core.c
kernel/bpf/syscall.c
kernel/bpf/verifier.c
net/core/filter.c

index 0fe98a567125aa7c339f5dfa537d278cda223868..73a5cf18fd84f3553f564456f0e482977afdfbe2 100644 (file)
@@ -766,7 +766,7 @@ emit_clear:
                        func = (u8 *) __bpf_call_base + imm;
 
                        /* Save skb pointer if we need to re-cache skb data */
-                       if (bpf_helper_changes_skb_data(func))
+                       if (bpf_helper_changes_pkt_data(func))
                                PPC_BPF_STL(3, 1, bpf_jit_stack_local(ctx));
 
                        bpf_jit_emit_func_call(image, ctx, (u64)func);
@@ -775,7 +775,7 @@ emit_clear:
                        PPC_MR(b2p[BPF_REG_0], 3);
 
                        /* refresh skb cache */
-                       if (bpf_helper_changes_skb_data(func)) {
+                       if (bpf_helper_changes_pkt_data(func)) {
                                /* reload skb pointer to r3 */
                                PPC_BPF_LL(3, 1, bpf_jit_stack_local(ctx));
                                bpf_jit_emit_skb_loads(image, ctx);
index bee281f3163d039e2fa203bcdaa02b8bf87d6ced..167b31b186c1313c2cea094ee3b972233d61a608 100644 (file)
@@ -981,7 +981,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
                EMIT2(0x0d00, REG_14, REG_W1);
                /* lgr %b0,%r2: load return value into %b0 */
                EMIT4(0xb9040000, BPF_REG_0, REG_2);
-               if (bpf_helper_changes_skb_data((void *)func)) {
+               if (bpf_helper_changes_pkt_data((void *)func)) {
                        jit->seen |= SEEN_SKB_CHANGE;
                        /* lg %b1,ST_OFF_SKBP(%r15) */
                        EMIT6_DISP_LH(0xe3000000, 0x0004, BPF_REG_1, REG_0,
index fe04a04dab8ec0df10c827623577102a994df71c..e76d1af60f7ad76a12fa4f01cf61b3c508ae0453 100644 (file)
@@ -853,7 +853,7 @@ xadd:                       if (is_imm8(insn->off))
                        func = (u8 *) __bpf_call_base + imm32;
                        jmp_offset = func - (image + addrs[i]);
                        if (seen_ld_abs) {
-                               reload_skb_data = bpf_helper_changes_skb_data(func);
+                               reload_skb_data = bpf_helper_changes_pkt_data(func);
                                if (reload_skb_data) {
                                        EMIT1(0x57); /* push %rdi */
                                        jmp_offset += 22; /* pop, mov, sub, mov */
index 49a81f1fc1d60082671e4ad462577f7beb01abe9..f441eda63beccd3e3f16578b480a8bde4861ebc5 100644 (file)
@@ -2686,6 +2686,11 @@ static int mlx4_xdp_set(struct net_device *dev, struct bpf_prog *prog)
        int err;
        int i;
 
+       if (prog && prog->xdp_adjust_head) {
+               en_err(priv, "Does not support bpf_xdp_adjust_head()\n");
+               return -EOPNOTSUPP;
+       }
+
        xdp_ring_num = prog ? priv->rx_ring_num : 0;
 
        /* No need to reconfigure buffers when simply swapping the
index 07020276fe73f0fef2ad41882b9df0c713d7b7fc..cbfa38fc72c0875d6754595e1335c5d1a5af26ff 100644 (file)
@@ -3183,6 +3183,11 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
        bool reset, was_opened;
        int i;
 
+       if (prog && prog->xdp_adjust_head) {
+               netdev_err(netdev, "Does not support bpf_xdp_adjust_head()\n");
+               return -EOPNOTSUPP;
+       }
+
        mutex_lock(&priv->state_lock);
 
        if ((netdev->features & NETIF_F_LRO) && prog) {
index 00d9a03be31df518b986eb5a14c1fb6377c1e1f8..e8d448109e03d518c1b67e3046c640cfd2c71795 100644 (file)
@@ -2946,6 +2946,10 @@ static int nfp_net_xdp_setup(struct nfp_net *nn, struct bpf_prog *prog)
        };
        int err;
 
+       if (prog && prog->xdp_adjust_head) {
+               nn_err(nn, "Does not support bpf_xdp_adjust_head()\n");
+               return -EOPNOTSUPP;
+       }
        if (!prog && !nn->xdp_prog)
                return 0;
        if (prog && nn->xdp_prog) {
index cf1dd1436d939b337100b36a5ce8c04a75f919d2..aecdd1c5c0ea24a368085c0b2a41f5891ce55ac1 100644 (file)
@@ -2507,6 +2507,11 @@ static int qede_xdp_set(struct qede_dev *edev, struct bpf_prog *prog)
 {
        struct qede_reload_args args;
 
+       if (prog && prog->xdp_adjust_head) {
+               DP_ERR(edev, "Does not support bpf_xdp_adjust_head()\n");
+               return -EOPNOTSUPP;
+       }
+
        /* If we're called, there was already a bpf reference increment */
        args.func = &qede_xdp_reload_func;
        args.u.new_prog = prog;
index f078d2b1cff6a7c80f97cfb5fad7da966a64af86..6a1658308612622b3d5e3eff2bfcd8cf5c1ff386 100644 (file)
@@ -406,7 +406,8 @@ struct bpf_prog {
        u16                     jited:1,        /* Is our filter JIT'ed? */
                                gpl_compatible:1, /* Is filter GPL compatible? */
                                cb_access:1,    /* Is control block accessed? */
-                               dst_needed:1;   /* Do we need dst entry? */
+                               dst_needed:1,   /* Do we need dst entry? */
+                               xdp_adjust_head:1; /* Adjusting pkt head? */
        kmemcheck_bitfield_end(meta);
        enum bpf_prog_type      type;           /* Type of BPF program */
        u32                     len;            /* Number of filter blocks */
@@ -440,6 +441,7 @@ struct bpf_skb_data_end {
 struct xdp_buff {
        void *data;
        void *data_end;
+       void *data_hard_start;
 };
 
 /* compute the linear packet data range [data, data_end) which
@@ -595,7 +597,7 @@ void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp);
 u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5);
 
 struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog);
-bool bpf_helper_changes_skb_data(void *func);
+bool bpf_helper_changes_pkt_data(void *func);
 
 struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
                                       const struct bpf_insn *patch, u32 len);
index 6123d9b8e828b2ff0d825bd8f4ffe374daac9b4f..0eb0e87dbe9f511672102f2123129328288a9159 100644 (file)
@@ -424,6 +424,12 @@ union bpf_attr {
  *     @len: length of header to be pushed in front
  *     @flags: Flags (unused for now)
  *     Return: 0 on success or negative error
+ *
+ * int bpf_xdp_adjust_head(xdp_md, delta)
+ *     Adjust the xdp_md.data by delta
+ *     @xdp_md: pointer to xdp_md
+ *     @delta: An positive/negative integer to be added to xdp_md.data
+ *     Return: 0 on success or negative on error
  */
 #define __BPF_FUNC_MAPPER(FN)          \
        FN(unspec),                     \
@@ -469,7 +475,8 @@ union bpf_attr {
        FN(csum_update),                \
        FN(set_hash_invalid),           \
        FN(get_numa_node_id),           \
-       FN(skb_change_head),
+       FN(skb_change_head),            \
+       FN(xdp_adjust_head),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -576,6 +583,8 @@ struct bpf_sock {
        __u32 protocol;
 };
 
+#define XDP_PACKET_HEADROOM 256
+
 /* User return codes for XDP prog type.
  * A valid XDP program must return one of these defined values. All other
  * return codes are reserved for future use. Unknown return codes will result
index bdcc9f4ba7678a077c554c63963935a562796d5f..83e0d153b0b46d64fe4916ea50ccced539c6ea9a 100644 (file)
@@ -1143,7 +1143,7 @@ struct bpf_prog * __weak bpf_int_jit_compile(struct bpf_prog *prog)
        return prog;
 }
 
-bool __weak bpf_helper_changes_skb_data(void *func)
+bool __weak bpf_helper_changes_pkt_data(void *func)
 {
        return false;
 }
index 88f609f1c0c3ad71b40ffc1286800a9bfeb8e7c3..4819ec9d95f6bdb82f4ae475d85b48c55f6e400c 100644 (file)
@@ -579,6 +579,8 @@ static void fixup_bpf_calls(struct bpf_prog *prog)
                                prog->dst_needed = 1;
                        if (insn->imm == BPF_FUNC_get_prandom_u32)
                                bpf_user_rnd_init_once();
+                       if (insn->imm == BPF_FUNC_xdp_adjust_head)
+                               prog->xdp_adjust_head = 1;
                        if (insn->imm == BPF_FUNC_tail_call) {
                                /* mark bpf_tail_call as different opcode
                                 * to avoid conditional branch in
index 5b14f85f45c6258a70d52d31d57861c9e2aa3d87..d28f9a3380a91d4b6f600a2027b99c868a1bb768 100644 (file)
@@ -1216,7 +1216,7 @@ static int check_call(struct bpf_verifier_env *env, int func_id)
                return -EINVAL;
        }
 
-       changes_data = bpf_helper_changes_skb_data(fn->func);
+       changes_data = bpf_helper_changes_pkt_data(fn->func);
 
        memset(&meta, 0, sizeof(meta));
        meta.pkt_access = fn->pkt_access;
index b751202e12f800e80c639d2364eed9aeec02f27d..b1461708a9774b03376d78a8761677feb031bfe6 100644 (file)
@@ -2234,7 +2234,28 @@ static const struct bpf_func_proto bpf_skb_change_head_proto = {
        .arg3_type      = ARG_ANYTHING,
 };
 
-bool bpf_helper_changes_skb_data(void *func)
+BPF_CALL_2(bpf_xdp_adjust_head, struct xdp_buff *, xdp, int, offset)
+{
+       void *data = xdp->data + offset;
+
+       if (unlikely(data < xdp->data_hard_start ||
+                    data > xdp->data_end - ETH_HLEN))
+               return -EINVAL;
+
+       xdp->data = data;
+
+       return 0;
+}
+
+static const struct bpf_func_proto bpf_xdp_adjust_head_proto = {
+       .func           = bpf_xdp_adjust_head,
+       .gpl_only       = false,
+       .ret_type       = RET_INTEGER,
+       .arg1_type      = ARG_PTR_TO_CTX,
+       .arg2_type      = ARG_ANYTHING,
+};
+
+bool bpf_helper_changes_pkt_data(void *func)
 {
        if (func == bpf_skb_vlan_push ||
            func == bpf_skb_vlan_pop ||
@@ -2244,7 +2265,8 @@ bool bpf_helper_changes_skb_data(void *func)
            func == bpf_skb_change_tail ||
            func == bpf_skb_pull_data ||
            func == bpf_l3_csum_replace ||
-           func == bpf_l4_csum_replace)
+           func == bpf_l4_csum_replace ||
+           func == bpf_xdp_adjust_head)
                return true;
 
        return false;
@@ -2670,6 +2692,8 @@ xdp_func_proto(enum bpf_func_id func_id)
                return &bpf_xdp_event_output_proto;
        case BPF_FUNC_get_smp_processor_id:
                return &bpf_get_smp_processor_id_proto;
+       case BPF_FUNC_xdp_adjust_head:
+               return &bpf_xdp_adjust_head_proto;
        default:
                return sk_filter_func_proto(func_id);
        }