$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
-# the kernel's version of zlib pulls in a lot of other kernel headers
-# which we don't provide inside the wrapper.
+# The pre-boot decompressors pull in a lot of kernel headers and other source
+# files. This creates a bit of a dependency headache since we need to copy
+# these files into the build dir, fix up any includes and ensure that dependent
+# files are copied in the right order.
+
+# these need to be seperate variables because they are copied out of different
+# directories in the kernel tree. Sure you COULd merge them, but it's a
+# cure-is-worse-than-disease situation.
+zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c
zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib-y) cuboot-c2k.o gunzip_util.o main.o): \
+$(addprefix $(obj)/, decompress.o): \
+ $(addprefix $(obj)/,$(zlib-decomp-y))
+
+$(addprefix $(obj)/, $(zlib-decomp-y)): \
+ $(addprefix $(obj)/,$(zliblinuxheader-y)) \
+ $(addprefix $(obj)/,$(zlibheader-y)) \
+ $(addprefix $(obj)/,$(zlib-y))
+
+$(addprefix $(obj)/,$(zlib-y)): \
$(addprefix $(obj)/,$(zliblinuxheader-y)) \
$(addprefix $(obj)/,$(zlibheader-y))
$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \
$(addprefix $(obj)/,$(libfdtheader))
-src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
+src-wlib-y := string.S crt0.S crtsavres.S stdio.c decompress.c main.c \
$(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
- gunzip_util.c elf_util.c $(zlib-y) devtree.c stdlib.c \
+ elf_util.c $(zlib-y) devtree.c stdlib.c \
oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
uartlite.c mpc52xx-psc.c opal.c opal-calls.S
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_kern_src)
+$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/%
+ $(call cmd,copy_kern_src)
+
quiet_cmd_copy_libfdt = COPY $@
cmd_copy_libfdt = cp $< $@
$(Q)cp $< $@
clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
- $(libfdt) $(libfdtheader) \
+ $(zlib-decomp-) $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
zImage.maple simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
-clean-kernel := vmlinux.strip vmlinux.bin
-clean-kernel += $(addsuffix .gz,$(clean-kernel))
+clean-kernel-base := vmlinux.strip vmlinux.bin
+clean-kernel := $(addsuffix .gz,$(clean-kernel-base))
# If not absolute clean-files are relative to $(obj).
clean-files += $(addprefix $(objtree)/, $(clean-kernel))
--- /dev/null
+/*
+ * Wrapper around the kernel's pre-boot decompression library.
+ *
+ * Copyright (C) IBM Corporation 2016.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+#include "types.h"
+
+/*
+ * The decompressor_*.c files play #ifdef games so they can be used in both
+ * pre-boot and regular kernel code. We need these definitions to make the
+ * includes work.
+ */
+
+#define STATIC static
+#define INIT
+#define __always_inline inline
+
+/*
+ * The build process will copy the required zlib source files and headers
+ * out of lib/ and "fix" the includes so they do not pull in other kernel
+ * headers.
+ */
+
+#ifdef CONFIG_KERNEL_GZIP
+# include "decompress_inflate.c"
+#endif
+
+/* globals for tracking the state of the decompression */
+static unsigned long decompressed_bytes;
+static unsigned long limit;
+static unsigned long skip;
+static char *output_buffer;
+
+/*
+ * flush() is called by __decompress() when the decompressor's scratch buffer is
+ * full.
+ */
+static long flush(void *v, unsigned long buffer_size)
+{
+ unsigned long end = decompressed_bytes + buffer_size;
+ unsigned long size = buffer_size;
+ unsigned long offset = 0;
+ char *in = v;
+ char *out;
+
+ /*
+ * if we hit our decompression limit, we need to fake an error to abort
+ * the in-progress decompression.
+ */
+ if (decompressed_bytes >= limit)
+ return -1;
+
+ /* skip this entire block */
+ if (end <= skip) {
+ decompressed_bytes += buffer_size;
+ return buffer_size;
+ }
+
+ /* skip some data at the start, but keep the rest of the block */
+ if (decompressed_bytes < skip && end > skip) {
+ offset = skip - decompressed_bytes;
+
+ in += offset;
+ size -= offset;
+ decompressed_bytes += offset;
+ }
+
+ out = &output_buffer[decompressed_bytes - skip];
+ size = min(decompressed_bytes + size, limit) - decompressed_bytes;
+
+ memcpy(out, in, size);
+ decompressed_bytes += size;
+
+ return buffer_size;
+}
+
+static void print_err(char *s)
+{
+ /* suppress the "error" when we terminate the decompressor */
+ if (decompressed_bytes >= limit)
+ return;
+
+ printf("Decompression error: '%s'\n\r", s);
+}
+
+/**
+ * partial_decompress - decompresses part or all of a compressed buffer
+ * @inbuf: input buffer
+ * @input_size: length of the input buffer
+ * @outbuf: input buffer
+ * @output_size: length of the input buffer
+ * @skip number of output bytes to ignore
+ *
+ * This function takes compressed data from inbuf, decompresses and write it to
+ * outbuf. Once output_size bytes are written to the output buffer, or the
+ * stream is exhausted the function will return the number of bytes that were
+ * decompressed. Otherwise it will return whatever error code the decompressor
+ * reported (NB: This is specific to each decompressor type).
+ *
+ * The skip functionality is mainly there so the program and discover
+ * the size of the compressed image so that it can ask firmware (if present)
+ * for an appropriately sized buffer.
+ */
+long partial_decompress(void *inbuf, unsigned long input_size,
+ void *outbuf, unsigned long output_size, unsigned long _skip)
+{
+ int ret;
+
+ /*
+ * The skipped bytes needs to be included in the size of data we want
+ * to decompress.
+ */
+ output_size += _skip;
+
+ decompressed_bytes = 0;
+ output_buffer = outbuf;
+ limit = output_size;
+ skip = _skip;
+
+ ret = __decompress(inbuf, input_size, NULL, flush, outbuf,
+ output_size, NULL, print_err);
+
+ /*
+ * If decompression was aborted due to an actual error rather than
+ * a fake error that we used to abort, then we should report it.
+ */
+ if (decompressed_bytes < limit)
+ return ret;
+
+ return decompressed_bytes - skip;
+}
#include "string.h"
#include "stdio.h"
#include "ops.h"
-#include "gunzip_util.h"
#include "reg.h"
-static struct gunzip_state gzstate;
-
struct addr_range {
void *addr;
unsigned long size;
static struct addr_range prep_kernel(void)
{
char elfheader[256];
- void *vmlinuz_addr = _vmlinux_start;
+ unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start;
unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
void *addr = 0;
struct elf_info ei;
- int len;
+ long len;
- /* gunzip the ELF header of the kernel */
- gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
- gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
+ partial_decompress(vmlinuz_addr, vmlinuz_size,
+ elfheader, sizeof(elfheader), 0);
if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
* the kernel bss must be claimed (it will be zero'd by the
* kernel itself)
*/
- printf("Allocating 0x%lx bytes for kernel ...\n\r", ei.memsize);
+ printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize);
if (platform_ops.vmlinux_alloc) {
addr = platform_ops.vmlinux_alloc(ei.memsize);
"device tree\n\r");
}
- /* Finally, gunzip the kernel */
- printf("gunzipping (0x%p <- 0x%p:0x%p)...", addr,
+ /* Finally, decompress the kernel */
+ printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr,
vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
- /* discard up to the actual load data */
- gunzip_discard(&gzstate, ei.elfoffset - sizeof(elfheader));
- len = gunzip_finish(&gzstate, addr, ei.loadsize);
+
+ len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+ addr, ei.loadsize, ei.elfoffset);
+
+ if (len < 0)
+ fatal("Decompression failed with error code %ld\n\r", len);
+
if (len != ei.loadsize)
- fatal("ran out of data! only got 0x%x of 0x%lx bytes.\n\r",
- len, ei.loadsize);
- printf("done 0x%x bytes\n\r", len);
+ fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r",
+ len, ei.loadsize);
+
+ printf("Done! Decompressed 0x%lx bytes\n\r", len);
flush_cache(addr, ei.loadsize);
return 31 - bit;
}
+long partial_decompress(void *inbuf, unsigned long input_size, void *outbuf,
+ unsigned long output_size, unsigned long skip);
+
#endif /* _PPC_BOOT_OPS_H_ */
projects / linux-beck.git / commitdiff