release_region(ioport, ITE_887x_IOSIZE);
}
+/*
+ * EndRun Technologies.
+ * Determine the number of ports available on the device.
+ */
+#define PCI_VENDOR_ID_ENDRUN 0x7401
+#define PCI_DEVICE_ID_ENDRUN_1588 0xe100
+
+static int pci_endrun_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+ unsigned long deviceID;
+ unsigned int number_uarts = 0;
+
+ /* EndRun device is all 0xexxx */
+ if (dev->vendor == PCI_VENDOR_ID_ENDRUN &&
+ (dev->device & 0xf000) != 0xe000)
+ return 0;
+
+ p = pci_iomap(dev, 0, 5);
+ if (p == NULL)
+ return -ENOMEM;
+
+ deviceID = ioread32(p);
+ /* EndRun device */
+ if (deviceID == 0x07000200) {
+ number_uarts = ioread8(p + 4);
+ dev_dbg(&dev->dev,
+ "%d ports detected on EndRun PCI Express device\n",
+ number_uarts);
+ }
+ pci_iounmap(dev, p);
+ return number_uarts;
+}
+
/*
* Oxford Semiconductor Inc.
* Check that device is part of the Tornado range of devices, then determine
.init = pci_netmos_init,
.setup = pci_netmos_9900_setup,
},
+ /*
+ * EndRun Technologies
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ENDRUN,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_endrun_init,
+ .setup = pci_default_setup,
+ },
/*
* For Oxford Semiconductor Tornado based devices
*/
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
+ pbn_endrun_2_4000000,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
pbn_oxsemi_2_4000000,
.first_offset = 0x03,
},
+ /*
+ * EndRun Technologies
+ * Uses the size of PCI Base region 0 to
+ * signal now many ports are available
+ * 2 port 952 Uart support
+ */
+ [pbn_endrun_2_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+
/*
* This board uses the size of PCI Base region 0 to
* signal now many ports are available
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
0x10b5, 0x106a, 0, 0,
pbn_plx_romulus },
+ /*
+ * EndRun Technologies. PCI express device range.
+ * EndRun PTP/1588 has 2 Native UARTs.
+ */
+ { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_endrun_2_4000000 },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.