F: include/linux/i2c-omap.h
OMAP DEVICE TREE SUPPORT
-M: Benoît Cousson <b-cousson@ti.com>
+M: Benoît Cousson <bcousson@baylibre.com>
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
L: devicetree@vger.kernel.org
F: drivers/char/hw_random/omap-rng.c
OMAP HWMOD SUPPORT
-M: Benoît Cousson <b-cousson@ti.com>
+M: Benoît Cousson <bcousson@baylibre.com>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod.*
OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M: Benoît Cousson <b-cousson@ti.com>
+M: Benoît Cousson <bcousson@baylibre.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
chosen {
- bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
};
memory {
- reg = <0x20000000 0x10000000>;
+ reg = <0x20000000 0x8000000>;
};
clocks {
usb0: ohci@00600000 {
status = "okay";
- num-ports = <2>;
- atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+ &pioD 19 GPIO_ACTIVE_LOW
&pioD 20 GPIO_ACTIVE_LOW
>;
};
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 24 0>; /* PD0 */
+ regulator-always-on;
+ regulator-boot-on;
};
};
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 170 0>; /* PV2 */
+ regulator-always-on;
+ regulator-boot-on;
};
};
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+ regulator-always-on;
+ regulator-boot-on;
};
vbus3_reg: regulator@3 {
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+ regulator-always-on;
+ regulator-boot-on;
};
};
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
+ .ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
};
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 1,
.options = 0,
};
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
};
static struct musb_hdrc_platform_data tusb_data = {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#else
- .mode = MUSB_HOST,
-#endif
.set_power = tusb_set_power,
.min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
.power = 100, /* Max 100 mA VBUS for host mode */
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
- .mode = MUSB_PERIPHERAL,
+ .mode = MUSB_OTG,
.power = 0,
};
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#else
- .mode = MUSB_HOST,
-#endif
+
/* .clock is set dynamically */
.config = &musb_config,
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
- if (cpu->map_io == NULL || cpu->init == NULL) {
+ if (cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported Samsung CPU");
}
- cpu->map_io();
+ if (cpu->map_io)
+ cpu->map_io();
}
/* s3c24xx_init_clocks