* counter interrupts are regular interrupts and not an NMI. This
* means that when we receive the interrupt we can call
* perf_event_do_pending() that handles all of the work with
- * interrupts enabled.
+ * interrupts disabled.
*/
static inline void
set_perf_event_pending(void)
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
/*
* The following SWIs are ARM private.
CALL(sys_perf_event_open)
/* 365 */ CALL(sys_recvmmsg)
CALL(sys_accept4)
+ CALL(sys_fanotify_init)
+ CALL(sys_fanotify_mark)
+ CALL(sys_prlimit64)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
/*
* Handle the pending perf events.
*
- * Note: this call *must* be run with interrupts enabled. For
- * platforms that can have the PMU interrupts raised as a PMI, this
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();
/*
* Handle the pending perf events.
*
- * Note: this call *must* be run with interrupts enabled. For
- * platforms that can have the PMU interrupts raised as a PMI, this
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();
#
# Common objects
-obj-y := timer.o console.o clock.o
+obj-y := timer.o console.o clock.o pm_runtime.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/sh_clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_ocr_mask = MMC_VDD_165_195,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi1_resources[] = {
static struct platform_device fsi_device = {
.name = "sh_fsi2",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(fsi_resources),
.resource = fsi_resources,
.dev = {
},
};
+static struct gpio_led ap4evb_leds[] = {
+ {
+ .name = "led4",
+ .gpio = GPIO_PORT185,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led2",
+ .gpio = GPIO_PORT186,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led3",
+ .gpio = GPIO_PORT187,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led1",
+ .gpio = GPIO_PORT188,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }
+};
+
+static struct gpio_led_platform_data ap4evb_leds_pdata = {
+ .num_leds = ARRAY_SIZE(ap4evb_leds),
+ .leds = ap4evb_leds,
+};
+
+static struct platform_device leds_device = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap4evb_leds_pdata,
+ },
+};
+
static struct platform_device *ap4evb_devices[] __initdata = {
+ &leds_device,
&nor_flash_device,
&smc911x_device,
&sdhi0_device,
gpio_request(GPIO_FN_CS5A, NULL);
gpio_request(GPIO_FN_IRQ6_39, NULL);
- /* enable LED 1 - 4 */
- gpio_request(GPIO_PORT185, NULL);
- gpio_request(GPIO_PORT186, NULL);
- gpio_request(GPIO_PORT187, NULL);
- gpio_request(GPIO_PORT188, NULL);
- gpio_direction_output(GPIO_PORT185, 1);
- gpio_direction_output(GPIO_PORT186, 1);
- gpio_direction_output(GPIO_PORT187, 1);
- gpio_direction_output(GPIO_PORT188, 1);
- gpio_export(GPIO_PORT185, 0);
- gpio_export(GPIO_PORT186, 0);
- gpio_export(GPIO_PORT187, 0);
- gpio_export(GPIO_PORT188, 0);
-
/* enable Debug switch (S6) */
gpio_request(GPIO_PORT32, NULL);
gpio_request(GPIO_PORT33, NULL);
struct clk pllc2_clk = {
.ops = &pllc2_clk_ops,
- .flags = CLK_ENABLE_ON_INIT,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
.parent_table = pllc2_parent,
enum { MSTP001,
MSTP131, MSTP130,
- MSTP129, MSTP128,
+ MSTP129, MSTP128, MSTP127, MSTP126,
MSTP118, MSTP117, MSTP116,
MSTP106, MSTP101, MSTP100,
MSTP223,
[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+ [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
+ [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
- [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
+ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
/*
- * SH-Mobile Timer
+ * SH-Mobile Clock Framework
*
* Copyright (C) 2010 Magnus Damm
*
+ * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
--- /dev/null
+/*
+ * arch/arm/mach-shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile ARM
+ *
+ * Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+
+#ifdef CONFIG_PM_RUNTIME
+#define BIT_ONCE 0
+#define BIT_ACTIVE 1
+#define BIT_CLK_ENABLED 2
+
+struct pm_runtime_data {
+ unsigned long flags;
+ struct clk *clk;
+};
+
+static void __devres_release(struct device *dev, void *res)
+{
+ struct pm_runtime_data *prd = res;
+
+ dev_dbg(dev, "__devres_release()\n");
+
+ if (test_bit(BIT_CLK_ENABLED, &prd->flags))
+ clk_disable(prd->clk);
+
+ if (test_bit(BIT_ACTIVE, &prd->flags))
+ clk_put(prd->clk);
+}
+
+static struct pm_runtime_data *__to_prd(struct device *dev)
+{
+ return devres_find(dev, __devres_release, NULL, NULL);
+}
+
+static void platform_pm_runtime_init(struct device *dev,
+ struct pm_runtime_data *prd)
+{
+ if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
+ prd->clk = clk_get(dev, NULL);
+ if (!IS_ERR(prd->clk)) {
+ set_bit(BIT_ACTIVE, &prd->flags);
+ dev_info(dev, "clocks managed by runtime pm\n");
+ }
+ }
+}
+
+static void platform_pm_runtime_bug(struct device *dev,
+ struct pm_runtime_data *prd)
+{
+ if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
+ dev_err(dev, "runtime pm suspend before resume\n");
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+ struct pm_runtime_data *prd = __to_prd(dev);
+
+ dev_dbg(dev, "platform_pm_runtime_suspend()\n");
+
+ platform_pm_runtime_bug(dev, prd);
+
+ if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+ clk_disable(prd->clk);
+ clear_bit(BIT_CLK_ENABLED, &prd->flags);
+ }
+
+ return 0;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+ struct pm_runtime_data *prd = __to_prd(dev);
+
+ dev_dbg(dev, "platform_pm_runtime_resume()\n");
+
+ platform_pm_runtime_init(dev, prd);
+
+ if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+ clk_enable(prd->clk);
+ set_bit(BIT_CLK_ENABLED, &prd->flags);
+ }
+
+ return 0;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+ /* suspend synchronously to disable clocks immediately */
+ return pm_runtime_suspend(dev);
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pm_runtime_data *prd;
+
+ dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+ if (action == BUS_NOTIFY_BIND_DRIVER) {
+ prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
+ if (prd)
+ devres_add(dev, prd);
+ else
+ dev_err(dev, "unable to alloc memory for runtime pm\n");
+ }
+
+ return 0;
+}
+
+#else /* CONFIG_PM_RUNTIME */
+
+static int platform_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct clk *clk;
+
+ dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+ switch (action) {
+ case BUS_NOTIFY_BIND_DRIVER:
+ clk = clk_get(dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ clk_put(clk);
+ dev_info(dev, "runtime pm disabled, clock forced on\n");
+ }
+ break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ clk = clk_get(dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_disable(clk);
+ clk_put(clk);
+ dev_info(dev, "runtime pm disabled, clock forced off\n");
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct notifier_block platform_bus_notifier = {
+ .notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+ bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+ return 0;
+}
+core_initcall(sh_pm_runtime_init);
projects / linux-beck.git / commitdiff