drive->sleep = timeout + jiffies;
drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
-
EXPORT_SYMBOL(ide_stall_queue);
-#define WAKEUP(drive) ((drive)->service_start + 2 * (drive)->service_time)
-
-/**
- * choose_drive - select a drive to service
- * @hwgroup: hardware group to select on
- *
- * choose_drive() selects the next drive which will be serviced.
- * This is necessary because the IDE layer can't issue commands
- * to both drives on the same cable, unlike SCSI.
- */
-
-static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
-{
- ide_drive_t *drive, *best;
-
-repeat:
- best = NULL;
- drive = hwgroup->drive;
-
- /*
- * drive is doing pre-flush, ordered write, post-flush sequence. even
- * though that is 3 requests, it must be seen as a single transaction.
- * we must not preempt this drive until that is complete
- */
- if (blk_queue_flushing(drive->queue)) {
- /*
- * small race where queue could get replugged during
- * the 3-request flush cycle, just yank the plug since
- * we want it to finish asap
- */
- blk_remove_plug(drive->queue);
- return drive;
- }
-
- do {
- u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
- u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
-
- if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
- !elv_queue_empty(drive->queue)) {
- if (best == NULL ||
- (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
- (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
- if (!blk_queue_plugged(drive->queue))
- best = drive;
- }
- }
- } while ((drive = drive->next) != hwgroup->drive);
-
- if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
- (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
- best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
- long t = (signed long)(WAKEUP(best) - jiffies);
- if (t >= WAIT_MIN_SLEEP) {
- /*
- * We *may* have some time to spare, but first let's see if
- * someone can potentially benefit from our nice mood today..
- */
- drive = best->next;
- do {
- if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
- && time_before(jiffies - best->service_time, WAKEUP(drive))
- && time_before(WAKEUP(drive), jiffies + t))
- {
- ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
- goto repeat;
- }
- } while ((drive = drive->next) != best);
- }
- }
- return best;
-}
-
/*
* Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
*
* A hwgroup is a serialized group of IDE interfaces. Usually there is
* exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
* possibly along with many other devices. This is especially common in
* PCI-based systems with off-board IDE controller cards.
*
- * The IDE driver uses a per-hwgroup spinlock to protect
- * access to the request queues, and to protect the hwgroup->busy flag.
+ * The IDE driver uses a per-hwgroup lock to protect the hwgroup->busy flag.
*
* The first thread into the driver for a particular hwgroup sets the
* hwgroup->busy flag to indicate that this hwgroup is now active,
*/
void do_ide_request(struct request_queue *q)
{
- ide_drive_t *orig_drive = q->queuedata;
- ide_hwgroup_t *hwgroup = orig_drive->hwif->hwgroup;
- ide_drive_t *drive;
- ide_hwif_t *hwif;
+ ide_drive_t *drive = q->queuedata;
+ ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
struct request *rq;
ide_startstop_t startstop;
- /* caller must own hwgroup->lock */
- BUG_ON(!irqs_disabled());
-
- while (!ide_lock_hwgroup(hwgroup)) {
- drive = choose_drive(hwgroup);
- if (drive == NULL) {
- int sleeping = 0;
- unsigned long sleep = 0; /* shut up, gcc */
- hwgroup->rq = NULL;
- drive = hwgroup->drive;
- do {
- if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
- (sleeping == 0 ||
- time_before(drive->sleep, sleep))) {
- sleeping = 1;
- sleep = drive->sleep;
- }
- } while ((drive = drive->next) != hwgroup->drive);
- if (sleeping) {
+ /*
+ * drive is doing pre-flush, ordered write, post-flush sequence. even
+ * though that is 3 requests, it must be seen as a single transaction.
+ * we must not preempt this drive until that is complete
+ */
+ if (blk_queue_flushing(q))
/*
- * Take a short snooze, and then wake up this hwgroup again.
- * This gives other hwgroups on the same a chance to
- * play fairly with us, just in case there are big differences
- * in relative throughputs.. don't want to hog the cpu too much.
+ * small race where queue could get replugged during
+ * the 3-request flush cycle, just yank the plug since
+ * we want it to finish asap
*/
- if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
- sleep = jiffies + WAIT_MIN_SLEEP;
-#if 1
- if (timer_pending(&hwgroup->timer))
- printk(KERN_CRIT "ide_set_handler: timer already active\n");
-#endif
- /* so that ide_timer_expiry knows what to do */
- hwgroup->sleeping = 1;
- hwgroup->req_gen_timer = hwgroup->req_gen;
- mod_timer(&hwgroup->timer, sleep);
- /* we purposely leave hwgroup locked
- * while sleeping */
- } else
- ide_unlock_hwgroup(hwgroup);
+ blk_remove_plug(q);
- /* no more work for this hwgroup (for now) */
- goto plug_device;
- }
+ spin_unlock_irq(q->queue_lock);
+ spin_lock_irq(&hwgroup->lock);
- if (drive != orig_drive)
- goto plug_device;
+ if (!ide_lock_hwgroup(hwgroup)) {
+repeat:
+ hwgroup->rq = NULL;
- hwif = drive->hwif;
+ if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
+ if (time_before(drive->sleep, jiffies)) {
+ ide_unlock_hwgroup(hwgroup);
+ goto plug_device;
+ }
+ }
if (hwif != hwgroup->hwif) {
/*
hwgroup->hwif = hwif;
hwgroup->drive = drive;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
- drive->service_start = jiffies;
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
/*
* we know that the queue isn't empty, but this can happen
* if the q->prep_rq_fn() decides to kill a request
*/
rq = elv_next_request(drive->queue);
+ spin_unlock_irq(q->queue_lock);
+ spin_lock_irq(&hwgroup->lock);
+
if (!rq) {
ide_unlock_hwgroup(hwgroup);
- break;
+ goto out;
}
/*
startstop = start_request(drive, rq);
spin_lock_irq(&hwgroup->lock);
- if (startstop == ide_stopped) {
- ide_unlock_hwgroup(hwgroup);
- if (!elv_queue_empty(orig_drive->queue))
- blk_plug_device(orig_drive->queue);
- }
- }
+ if (startstop == ide_stopped)
+ goto repeat;
+ } else
+ goto plug_device;
+out:
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
return;
plug_device:
- if (!elv_queue_empty(orig_drive->queue))
- blk_plug_device(orig_drive->queue);
+ spin_unlock_irq(&hwgroup->lock);
+ spin_lock_irq(q->queue_lock);
+
+ if (!elv_queue_empty(q))
+ blk_plug_device(q);
}
/*
return ret;
}
+static void ide_plug_device(ide_drive_t *drive)
+{
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (!elv_queue_empty(q))
+ blk_plug_device(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
/**
* ide_timer_expiry - handle lack of an IDE interrupt
* @data: timer callback magic (hwgroup)
void ide_timer_expiry (unsigned long data)
{
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
+ ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
ide_expiry_t *expiry;
unsigned long flags;
unsigned long wait = -1;
+ int plug_device = 0;
spin_lock_irqsave(&hwgroup->lock, flags);
* or we were "sleeping" to give other devices a chance.
* Either way, we don't really want to complain about anything.
*/
- if (hwgroup->sleeping) {
- hwgroup->sleeping = 0;
- ide_unlock_hwgroup(hwgroup);
- }
} else {
- ide_drive_t *drive = hwgroup->drive;
+ drive = hwgroup->drive;
if (!drive) {
printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
hwgroup->handler = NULL;
ide_error(drive, "irq timeout",
hwif->tp_ops->read_status(hwif));
}
- drive->service_time = jiffies - drive->service_start;
spin_lock_irq(&hwgroup->lock);
enable_irq(hwif->irq);
if (startstop == ide_stopped) {
ide_unlock_hwgroup(hwgroup);
- if (!elv_queue_empty(drive->queue))
- blk_plug_device(drive->queue);
+ plug_device = 1;
}
}
}
spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+ if (plug_device)
+ ide_plug_device(drive);
}
/**
unsigned long flags;
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
ide_hwif_t *hwif = hwgroup->hwif;
- ide_drive_t *drive;
+ ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
ide_startstop_t startstop;
irqreturn_t irq_ret = IRQ_NONE;
+ int plug_device = 0;
spin_lock_irqsave(&hwgroup->lock, flags);
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
- drive->service_time = jiffies - drive->service_start;
if (startstop == ide_stopped) {
if (hwgroup->handler == NULL) { /* paranoia */
ide_unlock_hwgroup(hwgroup);
- if (!elv_queue_empty(drive->queue))
- blk_plug_device(drive->queue);
+ plug_device = 1;
} else
printk(KERN_ERR "%s: %s: huh? expected NULL handler "
"on exit\n", __func__, drive->name);
irq_ret = IRQ_HANDLED;
out:
spin_unlock_irqrestore(&hwgroup->lock, flags);
+
+ if (plug_device)
+ ide_plug_device(drive);
+
return irq_ret;
}
projects / karo-tx-linux.git / commitdiff