static int dgap_event(struct board_t *bd);
static void dgap_poll_tasklet(unsigned long data);
-static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
- uchar byte2, uint ncmds);
-static void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds);
+static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
+ u8 byte2, uint ncmds);
+static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds);
static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt);
static int dgap_param(struct tty_struct *tty);
static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf,
static uint dgap_config_get_altpin(struct board_t *bd);
static int dgap_ms_sleep(ulong ms);
-static void dgap_do_bios_load(struct board_t *brd, const uchar *ubios, int len);
-static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len);
+static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len);
+static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len);
#ifdef DIGI_CONCENTRATORS_SUPPORTED
-static void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len);
+static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len);
#endif
static int dgap_after_config_loaded(int board);
static int dgap_finalize_board_init(struct board_t *brd);
*/
struct board_id {
uint config_type;
- uchar *name;
+ u8 *name;
uint maxports;
uint dpatype;
};
};
struct firmware_info {
- uchar *conf_name; /* dgap.conf */
- uchar *bios_name; /* BIOS filename */
- uchar *fep_name; /* FEP filename */
- uchar *con_name; /* Concentrator filename FIXME*/
+ u8 *conf_name; /* dgap.conf */
+ u8 *bios_name; /* BIOS filename */
+ u8 *fep_name; /* FEP filename */
+ u8 *con_name; /* Concentrator filename FIXME*/
int num; /* sequence number */
};
int i;
int tlw;
uint true_count = 0;
- uchar *vaddr;
- uchar modem = 0;
+ u8 *vaddr;
+ u8 modem = 0;
struct channel_t *ch;
struct bs_t *bs;
struct cm_t *cm;
* dgap_sniff - Dump data out to the "sniff" buffer if the
* proc sniff file is opened...
*/
-static void dgap_sniff_nowait_nolock(struct channel_t *ch, uchar *text,
- uchar *buf, int len)
+static void dgap_sniff_nowait_nolock(struct channel_t *ch, u8 *text,
+ u8 *buf, int len)
{
struct timeval tv;
int n;
int flip_len;
int len = 0;
int n = 0;
- uchar *buf;
- uchar tmpchar;
+ u8 *buf;
+ u8 tmpchar;
int s = 0;
if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
struct channel_t *ch = NULL;
struct un_t *un = NULL;
struct bs_t *bs = NULL;
- uchar tbusy;
+ u8 tbusy;
uint chars = 0;
u16 thead, ttail, tmask, chead, ctail;
ulong lock_flags = 0;
n -= remain;
vaddr = ch->ch_taddr + head;
- memcpy_toio(vaddr, (uchar *) buf, remain);
- dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *) buf,
+ memcpy_toio(vaddr, (u8 *) buf, remain);
+ dgap_sniff_nowait_nolock(ch, "USER WRITE", (u8 *) buf,
remain);
head = ch->ch_tstart;
vaddr = ch->ch_taddr + head;
remain = n;
- memcpy_toio(vaddr, (uchar *) buf, remain);
- dgap_sniff_nowait_nolock(ch, "USER WRITE", (uchar *)buf,
+ memcpy_toio(vaddr, (u8 *) buf, remain);
+ dgap_sniff_nowait_nolock(ch, "USER WRITE", (u8 *)buf,
remain);
head += remain;
struct channel_t *ch;
struct un_t *un;
int result = -EIO;
- uchar mstat = 0;
+ u8 mstat = 0;
ulong lock_flags;
if (!tty || tty->magic != TTY_MAGIC)
static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value)
{
int result = 0;
- uchar mstat = 0;
+ u8 mstat = 0;
ulong lock_flags;
int rc = 0;
* Copies the BIOS code from the user to the board,
* and starts the BIOS running.
*/
-static void dgap_do_bios_load(struct board_t *brd, const uchar *ubios, int len)
+static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len)
{
- uchar *addr;
+ u8 *addr;
uint offset;
int i;
*/
static int dgap_test_bios(struct board_t *brd)
{
- uchar *addr;
+ u8 *addr;
u16 word;
u16 err1;
u16 err2;
* Copies the FEP code from the user to the board,
* and starts the FEP running.
*/
-static void dgap_do_fep_load(struct board_t *brd, const uchar *ufep, int len)
+static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len)
{
- uchar *addr;
+ u8 *addr;
uint offset;
if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
* it its config string describing how the concentrators look.
*/
if ((brd->type == PCX) || (brd->type == PEPC)) {
- uchar string[100];
- uchar *config, *xconfig;
+ u8 string[100];
+ u8 *config, *xconfig;
int i = 0;
xconfig = dgap_create_config_string(brd, string);
*/
static int dgap_test_fep(struct board_t *brd)
{
- uchar *addr;
+ u8 *addr;
u16 word;
u16 err1;
u16 err2;
*/
static void dgap_do_reset_board(struct board_t *brd)
{
- uchar check;
+ u8 check;
u32 check1;
u32 check2;
int i = 0;
/*
* Sends a concentrator image into the FEP5 board.
*/
-static void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len)
+static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len)
{
char *vaddr;
u16 offset = 0;
u16 vpd_offset;
u16 image_length;
u16 i;
- uchar byte1;
- uchar byte2;
+ u8 byte1;
+ u8 byte2;
/*
* Poke the magic number at the PCI Rom Address location.
* in the cmd buffer before returning.
*
*=======================================================================*/
-static void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1,
- uchar byte2, uint ncmds)
+static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1,
+ u8 byte2, uint ncmds)
{
char *vaddr = NULL;
struct cm_t *cm_addr = NULL;
* Put the data in the circular command buffer.
*/
writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
- writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
+ writeb((u8) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writeb(byte1, (char *) (vaddr + head + CMDSTART + 2));
writeb(byte2, (char *) (vaddr + head + CMDSTART + 3));
* in the cmd buffer before returning.
*
*=======================================================================*/
-static void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds)
+static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds)
{
char *vaddr = NULL;
struct cm_t *cm_addr = NULL;
* Put the data in the circular command buffer.
*/
writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
- writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
+ writeb((u8) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
writew((u16) word, (char *) (vaddr + head + CMDSTART + 2));
head = (head + 4) & (CMDMAX - CMDSTART - 4);
*/
/* Write an FF to tell the FEP that we want an extended command */
- writeb((uchar) 0xff, (char *) (vaddr + head + CMDSTART + 0));
+ writeb((u8) 0xff, (char *) (vaddr + head + CMDSTART + 0));
- writeb((uchar) ch->ch_portnum, (uchar *) (vaddr + head + CMDSTART + 1));
+ writeb((u8) ch->ch_portnum, (u8 *) (vaddr + head + CMDSTART + 1));
writew((u16) cmd, (char *) (vaddr + head + CMDSTART + 2));
/*
*/
static uint dgap_get_custom_baud(struct channel_t *ch)
{
- uchar *vaddr;
+ u8 *vaddr;
ulong offset = 0;
uint value = 0;
u16 head;
u16 cflag;
u16 iflag;
- uchar mval;
- uchar hflow;
+ u8 mval;
+ u8 hflow;
if (!tty || tty->magic != TTY_MAGIC)
return -ENXIO;
ch->ch_hflow = hflow;
/* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SHFLOW, (uchar) hflow, 0xff, 0);
+ dgap_cmdb(ch, SHFLOW, (u8) hflow, 0xff, 0);
}
ch->ch_mostat = mval;
/* Okay to have channel and board locks held calling this */
- dgap_cmdb(ch, SMODEM, (uchar) mval, D_RTS(ch)|D_DTR(ch), 0);
+ dgap_cmdb(ch, SMODEM, (u8) mval, D_RTS(ch)|D_DTR(ch), 0);
}
/*
ulong lock_flags;
ulong lock_flags2;
struct bs_t *bs;
- uchar *event;
- uchar *vaddr = NULL;
+ u8 *event;
+ u8 *vaddr = NULL;
struct ev_t *eaddr = NULL;
uint head;
uint tail;
# define FALSE 0
#endif
-/* Required for our shared headers! */
-typedef unsigned char uchar;
-
#if !defined(TTY_FLIPBUF_SIZE)
# define TTY_FLIPBUF_SIZE 512
#endif
u16 device; /* PCI device ID */
u16 subvendor; /* PCI subsystem vendor ID */
u16 subdevice; /* PCI subsystem device ID */
- uchar rev; /* PCI revision ID */
+ u8 rev; /* PCI revision ID */
uint pci_bus; /* PCI bus value */
uint pci_slot; /* PCI slot value */
u16 maxports; /* MAX ports this board can handle */
- uchar vpd[VPDSIZE]; /* VPD of board, if found */
+ u8 vpd[VPDSIZE]; /* VPD of board, if found */
u32 bd_flags; /* Board flags */
spinlock_t bd_lock; /* Used to protect board */
ulong membase; /* Start of base memory of the card */
ulong membase_end; /* End of base memory of the card */
- uchar *re_map_port; /* Remapped io port of the card */
- uchar *re_map_membase;/* Remapped memory of the card */
+ u8 *re_map_port; /* Remapped io port of the card */
+ u8 *re_map_membase;/* Remapped memory of the card */
- uchar runwait; /* # Processes waiting for FEP */
- uchar inhibit_poller; /* Tells the poller to leave us alone */
+ u8 runwait; /* # Processes waiting for FEP */
+ u8 inhibit_poller; /* Tells the poller to leave us alone */
struct channel_t *channels[MAXPORTS]; /* array of pointers to our */
/* channels. */
wait_queue_head_t ch_flags_wait;
u32 pscan_state;
- uchar pscan_savechar;
+ u8 pscan_savechar;
u32 ch_portnum; /* Port number, 0 offset. */
u32 ch_open_count; /* open count */
u16 ch_cook; /* Output character mask */
- uchar ch_card; /* Card channel is on */
- uchar ch_stopc; /* Stop character */
- uchar ch_startc; /* Start character */
-
- uchar ch_mostat; /* FEP output modem status */
- uchar ch_mistat; /* FEP input modem status */
- uchar ch_mforce; /* Modem values to be forced */
- uchar ch_mval; /* Force values */
- uchar ch_fepstopc; /* FEP stop character */
- uchar ch_fepstartc; /* FEP start character */
-
- uchar ch_astopc; /* Auxiliary Stop character */
- uchar ch_astartc; /* Auxiliary Start character */
- uchar ch_fepastopc; /* Auxiliary FEP stop char */
- uchar ch_fepastartc; /* Auxiliary FEP start char */
-
- uchar ch_hflow; /* FEP hardware handshake */
- uchar ch_dsr; /* stores real dsr value */
- uchar ch_cd; /* stores real cd value */
- uchar ch_tx_win; /* channel tx buffer window */
- uchar ch_rx_win; /* channel rx buffer window */
+ u8 ch_card; /* Card channel is on */
+ u8 ch_stopc; /* Stop character */
+ u8 ch_startc; /* Start character */
+
+ u8 ch_mostat; /* FEP output modem status */
+ u8 ch_mistat; /* FEP input modem status */
+ u8 ch_mforce; /* Modem values to be forced */
+ u8 ch_mval; /* Force values */
+ u8 ch_fepstopc; /* FEP stop character */
+ u8 ch_fepstartc; /* FEP start character */
+
+ u8 ch_astopc; /* Auxiliary Stop character */
+ u8 ch_astartc; /* Auxiliary Start character */
+ u8 ch_fepastopc; /* Auxiliary FEP stop char */
+ u8 ch_fepastartc; /* Auxiliary FEP start char */
+
+ u8 ch_hflow; /* FEP hardware handshake */
+ u8 ch_dsr; /* stores real dsr value */
+ u8 ch_cd; /* stores real cd value */
+ u8 ch_tx_win; /* channel tx buffer window */
+ u8 ch_rx_win; /* channel rx buffer window */
uint ch_custom_speed; /* Custom baud, if set */
uint ch_baud_info; /* Current baud info for /proc output */
ulong ch_rxcount; /* total of data received so far */
* Download buffer structure.
************************************************************************/
struct downld_t {
- uchar dl_type; /* Header */
- uchar dl_seq; /* Download sequence */
+ u8 dl_type; /* Header */
+ u8 dl_seq; /* Download sequence */
ushort dl_srev; /* Software revision number */
ushort dl_lrev; /* Low revision number */
ushort dl_hrev; /* High revision number */
ushort dl_seg; /* Start segment address */
ushort dl_size; /* Number of bytes to download */
- uchar dl_data[1024]; /* Download data */
+ u8 dl_data[1024]; /* Download data */
};
/************************************************************************
projects / linux-beck.git / commitdiff