]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ath5k: Misc hw_reset updates
authorNick Kossifidis <mick@madwifi.org>
Sun, 20 Jul 2008 03:36:52 +0000 (06:36 +0300)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 1 Aug 2008 19:31:32 +0000 (15:31 -0400)
 * Update hw_reset to calculate some of the values we were using as static
 * Increase activation to rx delay

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath5k/hw.c

index 8cd8659e9128b608fcfb2fbb0a16dd0577ccf5c2..dc51b844c62d5c673a4fcd579a1c8ce524b0ce77 100644 (file)
@@ -847,7 +847,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
                        else
                                ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
 
-                       ath5k_hw_reg_write(ah, 0x000009b5, 0xa228);
+                       /* Some bits are disabled here, we know nothing about
+                        * register 0xa228 yet, most of the times this ends up
+                        * with a value 0x9b5 -haven't seen any dump with
+                        * a different value- */
+                       /* Got this from decompiling binary HAL */
+                       data = ath5k_hw_reg_read(ah, 0xa228);
+                       data &= 0xfffffdff;
+                       ath5k_hw_reg_write(ah, data, 0xa228);
+
+                       data = ath5k_hw_reg_read(ah, 0xa228);
+                       data &= 0xfffe03ff;
+                       ath5k_hw_reg_write(ah, data, 0xa228);
+                       data = 0;
+
+                       /* Just write 0x9b5 ? */
+                       /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
                        ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
                        ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
                        ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
@@ -864,6 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
                        else
                                data = 0xffb80d20;
                        ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+                       data = 0;
                }
 
                /*
@@ -883,7 +899,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
 
                /*
                 * Write RF registers
-                * TODO:Does this work on 5211 (5111) ?
                 */
                ret = ath5k_hw_rfregs(ah, channel, mode);
                if (ret)
@@ -1048,7 +1063,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
        ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
 
        /*
-        * 5111/5112 Specific
+        * On 5211+ read activation -> rx delay
+        * and use it.
         */
        if (ah->ah_version != AR5K_AR5210) {
                data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
@@ -1056,7 +1072,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
                data = (channel->hw_value & CHANNEL_CCK) ?
                        ((data << 2) / 22) : (data / 10);
 
-               udelay(100 + data);
+               udelay(100 + (2 * data));
+               data = 0;
        } else {
                mdelay(1);
        }
@@ -1139,6 +1156,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
                ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
                ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
                ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+               data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+               data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+                                               0x00000f80 : 0x00001380 ;
+               ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+               data = 0;
        }
 
        if (ah->ah_version == AR5K_AR5212) {