Input: elantech - report position also with 3 fingers

The 6-byte protocol supports reporting the position when three fingers
are pressed, exactly like when one finger is pressed. Report this.

In addition, it is also distinguishes between 3 and 4 fingers pressed.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index bd5b91da169e941305e423ba267775d54fc0c6bc..48311204ba51a76fbc90f7f3194e6a2f79e5a403 100644 (file)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -257,6 +257,14 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
        input_report_key(dev, BTN_TOUCH, fingers != 0);
 
        switch (fingers) {
+       case 3:
+               /*
+                * Same as one finger, except report of more than 3 fingers:
+                * byte 3:  n4  .   w1  w0   .   .   .   .
+                */
+               if (packet[3] & 0x80)
+                       fingers = 4;
+               /* pass through... */
        case 1:
                /*
                 * byte 1:  .   .   .   .   .  x10 x9  x8
@@ -309,6 +317,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
        input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
        input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
        input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+       input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
        input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
        input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
 
@@ -466,6 +475,7 @@ static void elantech_set_input_params(struct psmouse *psmouse)
                break;
 
        case 2:
+               __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
                input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
                input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
                input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);