SUB_MF_MODE_UNKNOWN = 0,
SUB_MF_MODE_UFP,
SUB_MF_MODE_NPAR1_DOT_5,
+ SUB_MF_MODE_BD,
};
struct bnx2x {
u8 mf_sub_mode;
#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \
bp->mf_sub_mode == SUB_MF_MODE_UFP)
+#define IS_MF_BD(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_BD)
u8 wol;
fp->mode = TPA_MODE_DISABLED;
}
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state)
+{
+ u32 cur;
+
+ if (!IS_MF_BD(bp) || !SHMEM2_HAS(bp, os_driver_state) || IS_VF(bp))
+ return;
+
+ cur = SHMEM2_RD(bp, os_driver_state[BP_FW_MB_IDX(bp)]);
+ DP(NETIF_MSG_IFUP, "Driver state %08x-->%08x\n",
+ cur, state);
+
+ SHMEM2_WR(bp, os_driver_state[BP_FW_MB_IDX(bp)], state);
+}
+
int bnx2x_load_cnic(struct bnx2x *bp)
{
int i, rc, port = BP_PORT(bp);
/* mark driver is loaded in shmem2 */
u32 val;
val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
+ val &= ~DRV_FLAGS_MTU_MASK;
+ val |= (bp->dev->mtu << DRV_FLAGS_MTU_SHIFT);
SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
DRV_FLAGS_CAPABILITIES_LOADED_L2);
if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
bnx2x_dcbx_init(bp, false);
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_ACTIVE);
+
DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n");
return 0;
DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
/* mark driver is unloaded in shmem2 */
if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
u32 val;
return NETDEV_TX_OK;
}
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default)
+{
+ int mfw_vn = BP_FW_MB_IDX(bp);
+ u32 tmp;
+
+ /* If the shmem shouldn't affect configuration, reflect */
+ if (!IS_MF_BD(bp)) {
+ int i;
+
+ for (i = 0; i < BNX2X_MAX_PRIORITY; i++)
+ c2s_map[i] = i;
+ *c2s_default = 0;
+
+ return;
+ }
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_lower[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ c2s_map[0] = tmp & 0xff;
+ c2s_map[1] = (tmp >> 8) & 0xff;
+ c2s_map[2] = (tmp >> 16) & 0xff;
+ c2s_map[3] = (tmp >> 24) & 0xff;
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_upper[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ c2s_map[4] = tmp & 0xff;
+ c2s_map[5] = (tmp >> 8) & 0xff;
+ c2s_map[6] = (tmp >> 16) & 0xff;
+ c2s_map[7] = (tmp >> 24) & 0xff;
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_default[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ *c2s_default = (tmp >> (8 * mfw_vn)) & 0xff;
+}
+
/**
* bnx2x_setup_tc - routine to configure net_device for multi tc
*
*/
int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
{
- int cos, prio, count, offset;
struct bnx2x *bp = netdev_priv(dev);
+ u8 c2s_map[BNX2X_MAX_PRIORITY], c2s_def;
+ int cos, prio, count, offset;
/* setup tc must be called under rtnl lock */
ASSERT_RTNL();
return -EINVAL;
}
+ bnx2x_get_c2s_mapping(bp, c2s_map, &c2s_def);
+
/* configure priority to traffic class mapping */
for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
- netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
+ int outer_prio = c2s_map[prio];
+
+ netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[outer_prio]);
DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
"mapping priority %d to tc %d\n",
- prio, bp->prio_to_cos[prio]);
+ outer_prio, bp->prio_to_cos[outer_prio]);
}
/* Use this configuration to differentiate tc0 from other COSes
if (netif_running(dev))
rc = bnx2x_set_eth_mac(bp, true);
+ if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return rc;
}
*/
dev->mtu = new_mtu;
+ if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return bnx2x_reload_if_running(dev);
}
*/
void bnx2x_tx_timeout(struct net_device *dev);
+/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration
+ * c2s_map should have BNX2X_MAX_PRIORITY entries.
+ * @bp: driver handle
+ * @c2s_map: should have BNX2X_MAX_PRIORITY entries for mapping
+ * @c2s_default: entry for non-tagged configuration
+ */
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default);
+
/*********************** Inlines **********************************/
/*********************** Fast path ********************************/
static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
start_params->mf_mode = bp->mf_mode;
start_params->sd_vlan_tag = bp->mf_ov;
+ /* Configure Ethertype for BD mode */
+ if (IS_MF_BD(bp)) {
+ DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n");
+ start_params->sd_vlan_eth_type = ETH_P_8021AD;
+ REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD);
+ REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD);
+ REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD);
+
+ bnx2x_get_c2s_mapping(bp, start_params->c2s_pri,
+ &start_params->c2s_pri_default);
+ start_params->c2s_pri_valid = 1;
+
+ DP(NETIF_MSG_IFUP,
+ "Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n",
+ start_params->c2s_pri[0], start_params->c2s_pri[1],
+ start_params->c2s_pri[2], start_params->c2s_pri[3],
+ start_params->c2s_pri[4], start_params->c2s_pri[5],
+ start_params->c2s_pri[6], start_params->c2s_pri[7],
+ start_params->c2s_pri_default);
+ }
+
if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
start_params->network_cos_mode = STATIC_COS;
else /* CHIP_IS_E1X */
void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
u32 verbose);
+/**
+ * bnx2x_set_os_driver_state - write driver state for management FW usage
+ *
+ * @bp: driver handle
+ * @state: OS_DRIVER_STATE_* value reflecting current driver state
+ */
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state);
#endif /* BNX2X_CMN_H */
} else
bp->wol = 0;
+ if (SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return 0;
}
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300
#define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE 0x00000400
+ #define SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE 0x00000500
#define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE 0x00000600
#define SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE 0x00000700
#define FCOE_FEATURES4_FEATURE_SETTINGS_OFFSET 0
};
+enum curr_cfg_method_e {
+ CURR_CFG_MET_NONE = 0, /* default config */
+ CURR_CFG_MET_OS = 1,
+ CURR_CFG_MET_VENDOR_SPEC = 2,/* e.g. Option ROM, NPAR, O/S Cfg Utils */
+};
+
struct ncsi_oem_data {
u32 driver_version[4];
struct ncsi_oem_fcoe_features ncsi_oem_fcoe_features;
#define DRV_FLAGS_CAPABILITIES_LOADED_L2 0x00000002
#define DRV_FLAGS_CAPABILITIES_LOADED_FCOE 0x00000004
#define DRV_FLAGS_CAPABILITIES_LOADED_ISCSI 0x00000008
+#define DRV_FLAGS_MTU_MASK 0xffff0000
+#define DRV_FLAGS_MTU_SHIFT 16
u32 extended_dev_info_shared_cfg_size;
/* We use indication for each PF (0..3) */
#define MFW_DRV_IND_READ_DONE_OFFSET(_pf_) (1 << (_pf_))
+ union { /* For various OEMs */ /* Offset 0x1a0 */
+ u8 storage_boot_prog[E2_FUNC_MAX];
+ #define STORAGE_BOOT_PROG_MASK 0x000000FF
+ #define STORAGE_BOOT_PROG_NONE 0x00000000
+ #define STORAGE_BOOT_PROG_ISCSI_IP_ACQUIRED 0x00000002
+ #define STORAGE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS 0x00000002
+ #define STORAGE_BOOT_PROG_TARGET_FOUND 0x00000004
+ #define STORAGE_BOOT_PROG_ISCSI_CHAP_SUCCESS 0x00000008
+ #define STORAGE_BOOT_PROG_FCOE_LUN_FOUND 0x00000008
+ #define STORAGE_BOOT_PROG_LOGGED_INTO_TGT 0x00000010
+ #define STORAGE_BOOT_PROG_IMG_DOWNLOADED 0x00000020
+ #define STORAGE_BOOT_PROG_OS_HANDOFF 0x00000040
+ #define STORAGE_BOOT_PROG_COMPLETED 0x00000080
+
+ u32 oem_i2c_data_addr;
+ };
+
+ /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+ /* For PCP values 0-3 use the map lower */
+ /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
+ * 0x0000FF00 - PCP 2, 0x000000FF PCP 3
+ */
+ u32 c2s_pcp_map_lower[E2_FUNC_MAX]; /* 0x1a4 */
+
+ /* For PCP values 4-7 use the map upper */
+ /* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
+ * 0x0000FF00 - PCP 6, 0x000000FF PCP 7
+ */
+ u32 c2s_pcp_map_upper[E2_FUNC_MAX]; /* 0x1b4 */
+
+ /* For PCP default value get the MSB byte of the map default */
+ u32 c2s_pcp_map_default[E2_FUNC_MAX]; /* 0x1c4 */
+
+ /* FC_NPIV table offset in NVRAM */
+ u32 fc_npiv_nvram_tbl_addr[PORT_MAX]; /* 0x1d4 */
+
+ /* Shows last method that changed configuration of this device */
+ enum curr_cfg_method_e curr_cfg; /* 0x1dc */
+
+ /* Storm FW version, shold be kept in the format 0xMMmmbbdd:
+ * MM - Major, mm - Minor, bb - Build ,dd - Drop
+ */
+ u32 netproc_fw_ver; /* 0x1e0 */
+
+ /* Option ROM SMASH CLP version */
+ u32 clp_ver; /* 0x1e4 */
+
+ u32 pcie_bus_num; /* 0x1e8 */
+
+ u32 sriov_switch_mode; /* 0x1ec */
+ #define SRIOV_SWITCH_MODE_NONE 0x0
+ #define SRIOV_SWITCH_MODE_VEB 0x1
+ #define SRIOV_SWITCH_MODE_VEPA 0x2
+
+ u8 rsrv2[E2_FUNC_MAX]; /* 0x1f0 */
+
+ u32 img_inv_table_addr; /* Address to INV_TABLE_P */ /* 0x1f4 */
+
+ u32 mtu_size[E2_FUNC_MAX]; /* 0x1f8 */
+
+ u32 os_driver_state[E2_FUNC_MAX]; /* 0x208 */
+ #define OS_DRIVER_STATE_NOT_LOADED 0 /* not installed */
+ #define OS_DRIVER_STATE_LOADING 1 /* transition state */
+ #define OS_DRIVER_STATE_DISABLED 2 /* installed but disabled */
+ #define OS_DRIVER_STATE_ACTIVE 3 /* installed and active */
};
func_params.f_obj = &bp->func_obj;
func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
- if (IS_MF_UFP(bp)) {
+ if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
int func = BP_ABS_FUNC(bp);
u32 val;
BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
bp->mf_ov);
goto fail;
+ } else {
+ DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
+ bp->mf_ov);
}
-
- DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov);
-
- bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
-
- return;
+ } else {
+ goto fail;
}
- /* not supported by SW yet */
+ bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
+ return;
fail:
bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
}
} else
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+ if (SHMEM2_HAS(bp, netproc_fw_ver))
+ SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
+
return 0;
}
static int bnx2x_get_hwinfo(struct bnx2x *bp)
{
int /*abs*/func = BP_ABS_FUNC(bp);
- int vn;
+ int vn, mfw_vn;
u32 val = 0, val2 = 0;
int rc = 0;
bp->mf_mode = 0;
bp->mf_sub_mode = 0;
vn = BP_VN(bp);
+ mfw_vn = BP_FW_MB_IDX(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
} else
BNX2X_DEV_INFO("illegal OV for SD\n");
break;
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
+ bp->mf_mode = MULTI_FUNCTION_SD;
+ bp->mf_sub_mode = SUB_MF_MODE_BD;
+ bp->mf_config[vn] =
+ MF_CFG_RD(bp,
+ func_mf_config[func].config);
+
+ if (SHMEM2_HAS(bp, mtu_size)) {
+ int mtu_idx = BP_FW_MB_IDX(bp);
+ u16 mtu_size;
+ u32 mtu;
+
+ mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
+ mtu_size = (u16)mtu;
+ DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
+ mtu_size, mtu);
+
+ /* if valid: update device mtu */
+ if (((mtu_size + ETH_HLEN) >=
+ ETH_MIN_PACKET_SIZE) &&
+ (mtu_size <=
+ ETH_MAX_JUMBO_PACKET_SIZE))
+ bp->dev->mtu = mtu_size;
+ }
+ break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
bp->mf_mode = MULTI_FUNCTION_SD;
bp->mf_sub_mode = SUB_MF_MODE_UFP;
BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
func, bp->mf_ov, bp->mf_ov);
- } else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) {
+ } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
+ (bp->mf_sub_mode == SUB_MF_MODE_BD)) {
dev_err(&bp->pdev->dev,
- "Unexpected - no valid MF OV for func %d in UFP mode\n",
+ "Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
func);
bp->path_has_ovlan = true;
} else {
bnx2x_register_phc(bp);
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
return 0;
init_one_exit:
/* Power on: we can't let PCI layer write to us while we are in D3 */
if (IS_PF(bp)) {
bnx2x_set_power_state(bp, PCI_D0);
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
/* Set endianity registers to reset values in case next driver
* boots in different endianty environment.
/* [RW 1] When this bit is set; the LLH will expect all packets to be with
e1hov */
#define NIG_REG_LLH_E1HOV_MODE 0x160d8
+/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
+ * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
+ */
+#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028
/* [RW 1] When this bit is set; the LLH will classify the packet before
sending it to the BRB or calculating WoL on it. */
#define NIG_REG_LLH_MF_MODE 0x16024
#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac
/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0
-#define PB_REG_CONTROL 0
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PBF_REG_VLAN_TYPE_0 0x15c06c
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
/* [R 2] Interrupt register #0 read */
#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
/* [R 8] debug only: TSDM current credit. Transaction based. */
#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PRS_REG_VLAN_TYPE_0 0x401a8
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22)
mutex_init(&bp->vfdb->bulletin_mutex);
+ if (SHMEM2_HAS(bp, sriov_switch_mode))
+ SHMEM2_WR(bp, sriov_switch_mode, SRIOV_SWITCH_MODE_VEB);
+
return 0;
failed:
DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);
projects / linux-beck.git / commitdiff