ddrdma_cmd.va = pci_alloc_consistent(adapter->pdev, ddrdma_cmd.size,
&ddrdma_cmd.dma);
if (!ddrdma_cmd.va) {
- dev_err(&adapter->pdev->dev, "Memory allocation failure \n");
+ dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
return -ENOMEM;
}
PCICFG_PM_CONTROL_OFFSET, PCICFG_PM_CONTROL_MASK);
if (status) {
dev_err(&adapter->pdev->dev,
- "Could not enable Wake-on-lan \n");
+ "Could not enable Wake-on-lan\n");
pci_free_consistent(adapter->pdev, cmd.size, cmd.va,
cmd.dma);
return status;
MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
pause_result |= (lp_pause &
MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
- DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+ DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
pause_result);
bnx2x_pause_resolve(vars, pause_result);
if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
bnx2x_pause_resolve(vars, pause_result);
- DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
+ DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n",
pause_result);
}
}
}
}
- DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x \n",
+ DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x\n",
gp_status, vars->phy_link_up, vars->line_speed);
DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x"
" autoneg 0x%x\n",
SPEED_AUTO_NEG) &&
((params->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
- DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
+ DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, params->port, ext_phy_type,
ext_phy_addr, MDIO_AN_DEVAD,
MDIO_AN_REG_ADV, 0x20);
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_10G_CTRL2, &tmp1);
- DP(NETIF_MSG_LINK, "1.7 = 0x%x \n", tmp1);
+ DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
} else if ((params->req_line_speed ==
SPEED_AUTO_NEG) &&
((params->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
- DP(NETIF_MSG_LINK, "Setting 1G clause37 \n");
+ DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
bnx2x_cl45_write(bp, params->port, ext_phy_type,
ext_phy_addr, MDIO_AN_DEVAD,
MDIO_PMA_REG_8727_MISC_CTRL, 0);
}
if (num_grat_arp < 0 || num_grat_arp > 255) {
- pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1 \n",
+ pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1\n",
num_grat_arp);
num_grat_arp = 1;
}
if (num_unsol_na < 0 || num_unsol_na > 255) {
- pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1 \n",
+ pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",
num_unsol_na);
num_unsol_na = 1;
}
dev_info(&pdev->dev, "Dave DNET at 0x%p (0x%08x) irq %d %pM\n",
bp->regs, mem_base, dev->irq, dev->dev_addr);
- dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma \n",
+ dev_info(&pdev->dev, "has %smdio, %sirq, %sgigabit, %sdma\n",
(bp->capabilities & DNET_HAS_MDIO) ? "" : "no ",
(bp->capabilities & DNET_HAS_IRQ) ? "" : "no ",
(bp->capabilities & DNET_HAS_GIGABIT) ? "" : "no ",
return -EINVAL;
}
if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser_fdx")) {
- printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy \n",
+ printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy\n",
dev->base_addr);
return -EACCES;
}
err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0);
if (err)
- en_dbg(HW, priv, "Could not update stats \n");
+ en_dbg(HW, priv, "Could not update stats\n");
mutex_lock(&mdev->state_lock);
if (mdev->device_up) {
"%x.\n",
ndev->name, net_rsp->opcode);
printk(KERN_ERR PFX
- "0x%08lx 0x%08lx 0x%08lx 0x%08lx \n",
+ "0x%08lx 0x%08lx 0x%08lx 0x%08lx\n",
(unsigned long int)tmp[0],
(unsigned long int)tmp[1],
(unsigned long int)tmp[2],
for (i = 0; i < count; i += 8) {
printk(KERN_ERR "%.08x: %.08x %.08x %.08x %.08x %.08x "
- "%.08x %.08x %.08x \n", i,
+ "%.08x %.08x %.08x\n", i,
tmp[i + 0],
tmp[i + 1],
tmp[i + 2],
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_LSO ? "LSO" : "",
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_UC ? "UC" : "",
ob_mac_tso_iocb->flags2 & OB_MAC_TSO_IOCB_TC ? "TC" : "");
- printk(KERN_ERR PFX "flags3 = %s %s %s \n",
+ printk(KERN_ERR PFX "flags3 = %s %s %s\n",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_IC ? "IC" : "",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_DFP ? "DFP" : "",
ob_mac_tso_iocb->flags3 & OB_MAC_TSO_IOCB_V ? "V" : "");
}
if(netif_msg_link(sis_priv))
- printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
+ printk(KERN_INFO "%s: Media Link On %s %s-duplex\n",
net_dev->name,
*speed == HW_SPEED_100_MBPS ?
"100mbps" : "10mbps",
int i;
if(netif_msg_tx_err(sis_priv))
- printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
+ printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n",
net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
/* Disable interrupts by clearing the interrupt mask. */
/*
* MIB timer and hardware timer have the same resolution of 80nS
*/
- DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns \n",
+ DB_RMT("RMT: setting new fddiPATHT_Rmode, t = %d ns\n",
(int) smc->mib.a[PATH0].fddiPATHT_Rmode,0) ;
outpd(ADDR(B2_RTM_INI),smc->mib.a[PATH0].fddiPATHT_Rmode) ;
}
mib = phy->mib ;
- DB_PCMN(1,"SIG rec %x %x: \n", bit,phy->r_val[bit] ) ;
+ DB_PCMN(1,"SIG rec %x %x:\n", bit,phy->r_val[bit] ) ;
bit++ ;
switch(bit) {
mib->fddiPORTMacIndicated.T_val = phy->t_val[9] ;
break ;
}
- DB_PCMN(1,"SIG snd %x %x: \n", bit,phy->t_val[bit] ) ;
+ DB_PCMN(1,"SIG snd %x %x:\n", bit,phy->t_val[bit] ) ;
}
/*
smt->smt_len = SMT_MAX_INFO_LEN - pcon.pc_len ;
mb->sm_len = smt->smt_len + sizeof(struct smt_header) ;
- DB_SMT("SRF: sending SRF at %x, len %d \n",smt,mb->sm_len) ;
+ DB_SMT("SRF: sending SRF at %x, len %d\n",smt,mb->sm_len) ;
DB_SMT("SRF: state SR%d Threshold %d\n",
smc->srf.sr_state,smc->srf.SRThreshold/TICKS_PER_SECOND) ;
#ifdef DEBUG
t->csum_offs, t->csum_write, t->csum_start);
}
- seq_printf(seq, "\nRx Ring: \n");
+ seq_printf(seq, "\nRx Ring:\n");
for (e = skge->rx_ring.to_clean; ; e = e->next) {
const struct skge_rx_desc *r = e->desc;
{
int i;
- DBG(KERN_DEBUG "DWMAC 100 DMA CSR \n");
+ DBG(KERN_DEBUG "DWMAC 100 DMA CSR\n");
for (i = 0; i < 9; i++)
pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
(DMA_BUS_MODE + i * 4),
#ifdef CONFIG_STMMAC_TIMER
priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
if (unlikely(priv->tm == NULL)) {
- pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
+ pr_err("%s: ERROR: timer memory alloc failed\n", __func__);
return -ENOMEM;
}
priv->tm->freq = tmrate;
printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
} else if ( phy <= TLAN_PHY_MAX_ADDR ) {
printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
- printk( "TLAN: Off. +0 +1 +2 +3 \n" );
+ printk( "TLAN: Off. +0 +1 +2 +3\n" );
for ( i = 0; i < 0x20; i+= 4 ) {
printk( "TLAN: 0x%02x", i );
TLan_MiiReadReg( dev, phy, i, &data0 );
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __func__);
+ printk(KERN_ERR "%s function time out\n", __func__);
}
static int mii_speed(struct mii_if_info *mii)
return;
udelay(10);
}
- printk(KERN_ERR "%s function time out \n", __func__);
+ printk(KERN_ERR "%s function time out\n", __func__);
}
static void tsi108_reset_ether(struct tsi108_prv_data * data)
udelay(10);
}
if (i == 0)
- printk(KERN_ERR "%s function time out \n", __func__);
+ printk(KERN_ERR "%s function time out\n", __func__);
if (data->phy_type == TSI108_PHY_BCM54XX) {
tsi108_write_mii(data, 0x09, 0x0300);
}
if (netif_msg_probe(&debug))
- printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n",
+ printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d)\n",
ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs,
ug_info->uf_info.irq);
ret = pci_enable_sriov(pdev, max_config_dev - 1);
if (ret)
vxge_debug_ll_config(VXGE_ERR,
- "Failed to enable SRIOV: %d \n", ret);
+ "Failed to enable SRIOV: %d\n", ret);
}
/*
u16 next_bd = card->chan[ch].tx_next_bd;
u32 scabase = card->hw.scabase;
- printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd);
+ printk ("\nnfree_tx_bd = %d\n", card->chan[ch].nfree_tx_bd);
printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch,
first_bd, TX_BD_ADDR(ch, first_bd),
next_bd, TX_BD_ADDR(ch, next_bd));
int res;
if (!tty || !tty->driver_data ) {
- CPC_TTY_DBG("hdlx-tty: no TTY in close \n");
+ CPC_TTY_DBG("hdlx-tty: no TTY in close\n");
return;
}
return(-EINVAL);
if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
- printk(KERN_WARNING "SDLA: io-port 0x%04lx in use \n", dev->base_addr);
+ printk(KERN_WARNING "SDLA: io-port 0x%04lx in use\n", dev->base_addr);
return(-EINVAL);
}
base = map->base_addr;
pl_type, buf_len);
tx_msg->num_pls = le16_to_cpu(num_pls+1);
tx_msg->size += padded_len;
- d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u \n",
+ d_printf(2, dev, "TX: appended %zu b (up to %u b) pl #%u\n",
padded_len, tx_msg->size, num_pls+1);
d_printf(2, dev,
"TX: appended hdr @%zu %zu b pl #%u @%zu %zu/%zu b\n",