that the USB device has been connected to the machine. This
file is read-only.
Users:
- PowerTOP <power@bughost.org>
- http://www.lesswatts.org/projects/powertop/
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
What: /sys/bus/usb/device/.../power/active_duration
Date: January 2008
will give an integer percentage. Note that this does not
account for counter wrap.
Users:
- PowerTOP <power@bughost.org>
- http://www.lesswatts.org/projects/powertop/
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
Date: January 2008
What: /sys/devices/.../power/
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power directory contains attributes
allowing the user space to check and modify some power
What: /sys/devices/.../power/wakeup
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/wakeup attribute allows the user
space to check if the device is enabled to wake up the system
What: /sys/devices/.../power/control
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/control attribute allows the user
space to control the run-time power management of the device.
What: /sys/devices/.../power/async
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../async attribute allows the user space to
enable or diasble the device's suspend and resume callbacks to
What: /sys/devices/.../power/wakeup_count
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_count attribute contains the number
of signaled wakeup events associated with the device. This
What: /sys/devices/.../power/wakeup_active_count
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active_count attribute contains the
number of times the processing of wakeup events associated with
What: /sys/devices/.../power/wakeup_abort_count
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_abort_count attribute contains the
number of times the processing of a wakeup event associated with
What: /sys/devices/.../power/wakeup_expire_count
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_expire_count attribute contains the
number of times a wakeup event associated with the device has
What: /sys/devices/.../power/wakeup_active
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_active attribute contains either 1,
or 0, depending on whether or not a wakeup event associated with
What: /sys/devices/.../power/wakeup_total_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_total_time_ms attribute contains
the total time of processing wakeup events associated with the
What: /sys/devices/.../power/wakeup_max_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_max_time_ms attribute contains
the maximum time of processing a single wakeup event associated
What: /sys/devices/.../power/wakeup_last_time_ms
Date: September 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_last_time_ms attribute contains
the value of the monotonic clock corresponding to the time of
What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
What: /sys/devices/.../power/pm_qos_latency_us
Date: March 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_resume_latency_us attribute
contains the PM QoS resume latency limit for the given device,
What: /sys/devices/.../power/pm_qos_no_power_off
Date: September 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_no_power_off attribute
is used for manipulating the PM QoS "no power off" flag. If
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"
What: /sys/power/
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power directory will contain files that will
provide a unified interface to the power management
What: /sys/power/state
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/state file controls the system power state.
Reading from this file returns what states are supported,
What: /sys/power/disk
Date: September 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/disk file controls the operating mode of the
suspend-to-disk mechanism. Reading from this file returns
What: /sys/power/image_size
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/image_size file controls the size of the image
created by the suspend-to-disk mechanism. It can be written a
What: /sys/power/pm_trace
Date: August 2006
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_trace file controls the code which saves the
last PM event point in the RTC across reboots, so that you can
What: /sys/power/pm_async
Date: January 2009
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/pm_async file controls the switch allowing the
user space to enable or disable asynchronous suspend and resume
What: /sys/power/wakeup_count
Date: July 2010
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wakeup_count file allows user space to put the
system into a sleep state while taking into account the
What: /sys/power/reserved_size
Date: May 2011
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/reserved_size file allows user space to control
the amount of memory reserved for allocations made by device
What: /sys/power/autosleep
Date: April 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/autosleep file can be written one of the strings
returned by reads from /sys/power/state. If that happens, a
What: /sys/power/wake_lock
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_lock file allows user space to create
wakeup source objects and activate them on demand (if one of
What: /sys/power/wake_unlock
Date: February 2012
-Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/power/wake_unlock file allows user space to deactivate
wakeup sources created with the help of /sys/power/wake_lock.
When to use this method is described in detail on the
Linux/ACPI home page:
-http://www.lesswatts.org/projects/acpi/overridingDSDT.php
+https://01.org/linux-acpi/documentation/overriding-dsdt
+++ /dev/null
-*** Memory binding ***
-
-The /memory node provides basic information about the address and size
-of the physical memory. This node is usually filled or updated by the
-bootloader, depending on the actual memory configuration of the given
-hardware.
-
-The memory layout is described by the following node:
-
-/ {
- #address-cells = <(n)>;
- #size-cells = <(m)>;
- memory {
- device_type = "memory";
- reg = <(baseaddr1) (size1)
- (baseaddr2) (size2)
- ...
- (baseaddrN) (sizeN)>;
- };
- ...
-};
-
-A memory node follows the typical device tree rules for "reg" property:
-n: number of cells used to store base address value
-m: number of cells used to store size value
-baseaddrX: defines a base address of the defined memory bank
-sizeX: the size of the defined memory bank
-
-
-More than one memory bank can be defined.
-
-
-*** Reserved memory regions ***
-
-In /memory/reserved-memory node one can create child nodes describing
-particular reserved (excluded from normal use) memory regions. Such
-memory regions are usually designed for the special usage by various
-device drivers. A good example are contiguous memory allocations or
-memory sharing with other operating system on the same hardware board.
-Those special memory regions might depend on the board configuration and
-devices used on the target system.
-
-Parameters for each memory region can be encoded into the device tree
-with the following convention:
-
-[(label):] (name) {
- compatible = "linux,contiguous-memory-region", "reserved-memory-region";
- reg = <(address) (size)>;
- (linux,default-contiguous-region);
-};
-
-compatible: one or more of:
- - "linux,contiguous-memory-region" - enables binding of this
- region to Contiguous Memory Allocator (special region for
- contiguous memory allocations, shared with movable system
- memory, Linux kernel-specific).
- - "reserved-memory-region" - compatibility is defined, given
- region is assigned for exclusive usage for by the respective
- devices.
-
-reg: standard property defining the base address and size of
- the memory region
-
-linux,default-contiguous-region: property indicating that the region
- is the default region for all contiguous memory
- allocations, Linux specific (optional)
-
-It is optional to specify the base address, so if one wants to use
-autoconfiguration of the base address, '0' can be specified as a base
-address in the 'reg' property.
-
-The /memory/reserved-memory node must contain the same #address-cells
-and #size-cells value as the root node.
-
-
-*** Device node's properties ***
-
-Once regions in the /memory/reserved-memory node have been defined, they
-may be referenced by other device nodes. Bindings that wish to reference
-memory regions should explicitly document their use of the following
-property:
-
-memory-region = <&phandle_to_defined_region>;
-
-This property indicates that the device driver should use the memory
-region pointed by the given phandle.
-
-
-*** Example ***
-
-This example defines a memory consisting of 4 memory banks. 3 contiguous
-regions are defined for Linux kernel, one default of all device drivers
-(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the
-framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB)
-and one for multimedia processing (labelled multimedia_mem, placed at
-0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000
-device for DMA memory allocations (Linux kernel drivers will use CMA is
-available or dma-exclusive usage otherwise). 'multimedia_mem' is
-assigned to scaler@12500000 and codec@12600000 devices for contiguous
-memory allocations when CMA driver is enabled.
-
-The reason for creating a separate region for framebuffer device is to
-match the framebuffer base address to the one configured by bootloader,
-so once Linux kernel drivers starts no glitches on the displayed boot
-logo appears. Scaller and codec drivers should share the memory
-allocations.
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* ... */
-
- memory {
- reg = <0x40000000 0x10000000
- 0x50000000 0x10000000
- 0x60000000 0x10000000
- 0x70000000 0x10000000>;
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * global autoconfigured region for contiguous allocations
- * (used only with Contiguous Memory Allocator)
- */
- contig_region@0 {
- compatible = "linux,contiguous-memory-region";
- reg = <0x0 0x4000000>;
- linux,default-contiguous-region;
- };
-
- /*
- * special region for framebuffer
- */
- display_region: region@78000000 {
- compatible = "linux,contiguous-memory-region", "reserved-memory-region";
- reg = <0x78000000 0x800000>;
- };
-
- /*
- * special region for multimedia processing devices
- */
- multimedia_region: region@77000000 {
- compatible = "linux,contiguous-memory-region";
- reg = <0x77000000 0x4000000>;
- };
- };
- };
-
- /* ... */
-
- fb0: fb@12300000 {
- status = "okay";
- memory-region = <&display_region>;
- };
-
- scaler: scaler@12500000 {
- status = "okay";
- memory-region = <&multimedia_region>;
- };
-
- codec: codec@12600000 {
- status = "okay";
- memory-region = <&multimedia_region>;
- };
-};
SLAVE DMA ENGINE
devm_acpi_dma_controller_register()
+
+SPI
+ devm_spi_register_master()
ACPI
M: Len Brown <lenb@kernel.org>
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-Q: http://patchwork.kernel.org/project/linux-acpi/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
+W: https://01.org/linux-acpi
+Q: https://patchwork.kernel.org/project/linux-acpi/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
S: Supported
F: drivers/acpi/
F: drivers/pnp/pnpacpi/
ACPI FAN DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
+W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/fan.c
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
+W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/*thermal*
ACPI VIDEO DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
+W: https://01.org/linux-acpi
S: Supported
F: drivers/acpi/video.c
F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Viresh Kumar <viresh.kumar@linaro.org>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
F: drivers/cpuidle/cpuidle-big_little.c
CPUIDLE DRIVERS
-M: Rafael J. Wysocki <rjw@sisk.pl>
+M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
L: linux-pm@vger.kernel.org
S: Maintained
FREEZER
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/freezing-of-tasks.txt
S: Odd Fixes (e.g., new signatures)
F: drivers/scsi/fdomain.*
+GCOV BASED KERNEL PROFILING
+M: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+S: Maintained
+F: kernel/gcov/
+F: Documentation/gcov.txt
+
GDT SCSI DISK ARRAY CONTROLLER DRIVER
M: Achim Leubner <achim_leubner@adaptec.com>
L: linux-scsi@vger.kernel.org
HIBERNATION (aka Software Suspend, aka swsusp)
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: arch/x86/power/
INTEL MENLOW THERMAL DRIVER
M: Sujith Thomas <sujith.thomas@intel.com>
L: platform-driver-x86@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
+W: https://01.org/linux-acpi
S: Supported
F: drivers/platform/x86/intel_menlow.c
SUSPEND TO RAM
M: Len Brown <len.brown@intel.com>
M: Pavel Machek <pavel@ucw.cz>
-M: "Rafael J. Wysocki" <rjw@sisk.pl>
+M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
S: Supported
F: Documentation/power/
VERSION = 3
PATCHLEVEL = 12
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*
{
phys_reset_t phys_reset;
- BUG_ON(!platform_ops);
+ if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
+ return;
BUG_ON(!irqs_disabled());
/*
{
phys_reset_t phys_reset;
- BUG_ON(!platform_ops);
+ if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+ return;
BUG_ON(!irqs_disabled());
/* Very similar to mcpm_cpu_power_down() */
#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
/*
* Certain hardware parameters determined at the time of device manufacture,
*/
#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
+#define param_start(x) (void *)(x)
#else
#define PARAM_BASE 0xa0000a00
+#define param_start(x) __va(x)
#endif
#define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 ) | ( b << 8 ) | a )
void sharpsl_save_param(void)
{
- memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
+ memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
sharpsl_param.comadj=-1;
generic-y += termios.h
generic-y += timex.h
generic-y += trace_clock.h
-generic-y += types.h
generic-y += unaligned.h
*
* This must be called with interrupts disabled.
*
- * This does not return. Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return. Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_power_down(void);
*
* This must be called with interrupts disabled.
*
- * This does not return. Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return. Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
*/
void mcpm_cpu_suspend(u64 expected_residency);
unsigned int i, unsigned int n,
unsigned long *args)
{
+ if (n == 0)
+ return;
+
if (i + n > SYSCALL_MAX_ARGS) {
unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
unsigned int i, unsigned int n,
const unsigned long *args)
{
+ if (n == 0)
+ return;
+
if (i + n > SYSCALL_MAX_ARGS) {
pr_warning("%s called with max args %d, handling only %d\n",
__func__, i + n, SYSCALL_MAX_ARGS);
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
and r0, r0, #0xc0000000 @ multiprocessing extensions and
teq r0, #0x80000000 @ not part of a uniprocessor system?
- moveq pc, lr @ yes, assume SMP
+ bne __fixup_smp_on_up @ no, assume UP
+
+ @ Core indicates it is SMP. Check for Aegis SOC where a single
+ @ Cortex-A9 CPU is present but SMP operations fault.
+ mov r4, #0x41000000
+ orr r4, r4, #0x0000c000
+ orr r4, r4, #0x00000090
+ teq r3, r4 @ Check for ARM Cortex-A9
+ movne pc, lr @ Not ARM Cortex-A9,
+
+ @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
+ @ below address check will need to be #ifdef'd or equivalent
+ @ for the Aegis platform.
+ mrc p15, 4, r0, c15, c0 @ get SCU base address
+ teq r0, #0x0 @ '0' on actual UP A9 hardware
+ beq __fixup_smp_on_up @ So its an A9 UP
+ ldr r0, [r0, #4] @ read SCU Config
+ and r0, r0, #0x3 @ number of CPUs
+ teq r0, #0x0 @ is 1?
+ movne pc, lr
__fixup_smp_on_up:
adr r0, 1f
break;
len = (j - i) << PAGE_SHIFT;
- ret = iommu_map(mapping->domain, iova, phys, len, 0);
+ ret = iommu_map(mapping->domain, iova, phys, len,
+ IOMMU_READ|IOMMU_WRITE);
if (ret < 0)
goto fail;
iova += len;
GFP_KERNEL);
}
+static int __dma_direction_to_prot(enum dma_data_direction dir)
+{
+ int prot;
+
+ switch (dir) {
+ case DMA_BIDIRECTIONAL:
+ prot = IOMMU_READ | IOMMU_WRITE;
+ break;
+ case DMA_TO_DEVICE:
+ prot = IOMMU_READ;
+ break;
+ case DMA_FROM_DEVICE:
+ prot = IOMMU_WRITE;
+ break;
+ default:
+ prot = 0;
+ }
+
+ return prot;
+}
+
/*
* Map a part of the scatter-gather list into contiguous io address space
*/
int ret = 0;
unsigned int count;
struct scatterlist *s;
+ int prot;
size = PAGE_ALIGN(size);
*handle = DMA_ERROR_CODE;
!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
- ret = iommu_map(mapping->domain, iova, phys, len, 0);
+ prot = __dma_direction_to_prot(dir);
+
+ ret = iommu_map(mapping->domain, iova, phys, len, prot);
if (ret < 0)
goto fail;
count += len >> PAGE_SHIFT;
if (dma_addr == DMA_ERROR_CODE)
return dma_addr;
- switch (dir) {
- case DMA_BIDIRECTIONAL:
- prot = IOMMU_READ | IOMMU_WRITE;
- break;
- case DMA_TO_DEVICE:
- prot = IOMMU_READ;
- break;
- case DMA_FROM_DEVICE:
- prot = IOMMU_WRITE;
- break;
- default:
- prot = 0;
- }
+ prot = __dma_direction_to_prot(dir);
ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
if (ret < 0)
#include <linux/nodemask.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
-#include <linux/of_reserved_mem.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
if (mdesc->reserve)
mdesc->reserve();
- early_init_dt_scan_reserved_mem();
-
/*
* reserve memory for DMA contigouos allocations,
* must come from DMA area inside low memory
config MICROCODE
tristate "CPU microcode loading support"
+ depends on CPU_SUP_AMD || CPU_SUP_INTEL
select FW_LOADER
---help---
break;
case UV3_HUB_PART_NUMBER:
case UV3_HUB_PART_NUMBER_X:
- uv_min_hub_revision_id += UV3_HUB_REVISION_BASE - 1;
+ uv_min_hub_revision_id += UV3_HUB_REVISION_BASE;
break;
}
if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
return;
- printk(KERN_INFO "KVM setup paravirtual spinlock\n");
+ pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(kvm_lock_spinning);
+ pv_lock_ops.unlock_kick = kvm_unlock_kick;
+}
+
+static __init int kvm_spinlock_init_jump(void)
+{
+ if (!kvm_para_available())
+ return 0;
+ if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
+ return 0;
static_key_slow_inc(¶virt_ticketlocks_enabled);
+ printk(KERN_INFO "KVM setup paravirtual spinlock\n");
- pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(kvm_lock_spinning);
- pv_lock_ops.unlock_kick = kvm_unlock_kick;
+ return 0;
}
+early_initcall(kvm_spinlock_init_jump);
+
#endif /* CONFIG_PARAVIRT_SPINLOCKS */
old memory can be recycled */
make_lowmem_page_readwrite(xen_initial_gdt);
+#ifdef CONFIG_X86_32
+ /*
+ * Xen starts us with XEN_FLAT_RING1_DS, but linux code
+ * expects __USER_DS
+ */
+ loadsegment(ds, __USER_DS);
+ loadsegment(es, __USER_DS);
+#endif
+
xen_filter_cpu_maps();
xen_setup_vcpu_info_placement();
}
* the disk size.
*
* Hybrid MBRs do not necessarily comply with this.
+ *
+ * Consider a bad value here to be a warning to support dd'ing
+ * an image from a smaller disk to a larger disk.
*/
if (ret == GPT_MBR_PROTECTIVE) {
sz = le32_to_cpu(mbr->partition_record[part].size_in_lba);
if (sz != (uint32_t) total_sectors - 1 && sz != 0xFFFFFFFF)
- ret = 0;
+ pr_debug("GPT: mbr size in lba (%u) different than whole disk (%u).\n",
+ sz, min_t(uint32_t,
+ total_sectors - 1, 0xFFFFFFFF));
}
done:
return ret;
are configured, ACPI is used.
The project home page for the Linux ACPI subsystem is here:
- <http://www.lesswatts.org/projects/acpi/>
+ <https://01.org/linux-acpi>
Linux support for ACPI is based on Intel Corporation's ACPI
Component Architecture (ACPI CA). For more information on the
default y
help
This driver handles events on the power, sleep, and lid buttons.
- A daemon reads /proc/acpi/event and perform user-defined actions
- such as shutting down the system. This is necessary for
- software-controlled poweroff.
+ A daemon reads events from input devices or via netlink and
+ performs user-defined actions such as shutting down the system.
+ This is necessary for software-controlled poweroff.
To compile this driver as a module, choose M here:
the module will be called button.
}
}
EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
-
-/**
- * acpi_dev_pm_add_dependent - Add physical device depending for PM.
- * @handle: Handle of ACPI device node.
- * @depdev: Device depending on that node for PM.
- */
-void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev)
-{
- struct acpi_device_physical_node *dep;
- struct acpi_device *adev;
-
- if (!depdev || acpi_bus_get_device(handle, &adev))
- return;
-
- mutex_lock(&adev->physical_node_lock);
-
- list_for_each_entry(dep, &adev->power_dependent, node)
- if (dep->dev == depdev)
- goto out;
-
- dep = kzalloc(sizeof(*dep), GFP_KERNEL);
- if (dep) {
- dep->dev = depdev;
- list_add_tail(&dep->node, &adev->power_dependent);
- }
-
- out:
- mutex_unlock(&adev->physical_node_lock);
-}
-EXPORT_SYMBOL_GPL(acpi_dev_pm_add_dependent);
-
-/**
- * acpi_dev_pm_remove_dependent - Remove physical device depending for PM.
- * @handle: Handle of ACPI device node.
- * @depdev: Device depending on that node for PM.
- */
-void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev)
-{
- struct acpi_device_physical_node *dep;
- struct acpi_device *adev;
-
- if (!depdev || acpi_bus_get_device(handle, &adev))
- return;
-
- mutex_lock(&adev->physical_node_lock);
-
- list_for_each_entry(dep, &adev->power_dependent, node)
- if (dep->dev == depdev) {
- list_del(&dep->node);
- kfree(dep);
- break;
- }
-
- mutex_unlock(&adev->physical_node_lock);
-}
-EXPORT_SYMBOL_GPL(acpi_dev_pm_remove_dependent);
#endif /* CONFIG_PM */
#define ACPI_POWER_RESOURCE_STATE_ON 0x01
#define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
-struct acpi_power_dependent_device {
- struct list_head node;
- struct acpi_device *adev;
- struct work_struct work;
-};
-
struct acpi_power_resource {
struct acpi_device device;
struct list_head list_node;
- struct list_head dependent;
char *name;
u32 system_level;
u32 order;
return 0;
}
-static void acpi_power_resume_dependent(struct work_struct *work)
-{
- struct acpi_power_dependent_device *dep;
- struct acpi_device_physical_node *pn;
- struct acpi_device *adev;
- int state;
-
- dep = container_of(work, struct acpi_power_dependent_device, work);
- adev = dep->adev;
- if (acpi_power_get_inferred_state(adev, &state))
- return;
-
- if (state > ACPI_STATE_D0)
- return;
-
- mutex_lock(&adev->physical_node_lock);
-
- list_for_each_entry(pn, &adev->physical_node_list, node)
- pm_request_resume(pn->dev);
-
- list_for_each_entry(pn, &adev->power_dependent, node)
- pm_request_resume(pn->dev);
-
- mutex_unlock(&adev->physical_node_lock);
-}
-
static int __acpi_power_on(struct acpi_power_resource *resource)
{
acpi_status status = AE_OK;
resource->name));
} else {
result = __acpi_power_on(resource);
- if (result) {
+ if (result)
resource->ref_count--;
- } else {
- struct acpi_power_dependent_device *dep;
-
- list_for_each_entry(dep, &resource->dependent, node)
- schedule_work(&dep->work);
- }
}
return result;
}
return result;
}
-static void acpi_power_add_dependent(struct acpi_power_resource *resource,
- struct acpi_device *adev)
-{
- struct acpi_power_dependent_device *dep;
-
- mutex_lock(&resource->resource_lock);
-
- list_for_each_entry(dep, &resource->dependent, node)
- if (dep->adev == adev)
- goto out;
-
- dep = kzalloc(sizeof(*dep), GFP_KERNEL);
- if (!dep)
- goto out;
-
- dep->adev = adev;
- INIT_WORK(&dep->work, acpi_power_resume_dependent);
- list_add_tail(&dep->node, &resource->dependent);
-
- out:
- mutex_unlock(&resource->resource_lock);
-}
-
-static void acpi_power_remove_dependent(struct acpi_power_resource *resource,
- struct acpi_device *adev)
-{
- struct acpi_power_dependent_device *dep;
- struct work_struct *work = NULL;
-
- mutex_lock(&resource->resource_lock);
-
- list_for_each_entry(dep, &resource->dependent, node)
- if (dep->adev == adev) {
- list_del(&dep->node);
- work = &dep->work;
- break;
- }
-
- mutex_unlock(&resource->resource_lock);
-
- if (work) {
- cancel_work_sync(work);
- kfree(dep);
- }
-}
-
static struct attribute *attrs[] = {
NULL,
};
void acpi_power_add_remove_device(struct acpi_device *adev, bool add)
{
- struct acpi_device_power_state *ps;
- struct acpi_power_resource_entry *entry;
int state;
if (adev->wakeup.flags.valid)
if (!adev->power.flags.power_resources)
return;
- ps = &adev->power.states[ACPI_STATE_D0];
- list_for_each_entry(entry, &ps->resources, node) {
- struct acpi_power_resource *resource = entry->resource;
-
- if (add)
- acpi_power_add_dependent(resource, adev);
- else
- acpi_power_remove_dependent(resource, adev);
- }
-
for (state = ACPI_STATE_D0; state <= ACPI_STATE_D3_HOT; state++)
acpi_power_expose_hide(adev,
&adev->power.states[state].resources,
acpi_init_device_object(device, handle, ACPI_BUS_TYPE_POWER,
ACPI_STA_DEFAULT);
mutex_init(&resource->resource_lock);
- INIT_LIST_HEAD(&resource->dependent);
INIT_LIST_HEAD(&resource->list_node);
resource->name = device->pnp.bus_id;
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
mutex_lock(&resource->resource_lock);
result = acpi_power_get_state(resource->device.handle, &state);
- if (result)
+ if (result) {
+ mutex_unlock(&resource->resource_lock);
continue;
+ }
if (state == ACPI_POWER_RESOURCE_STATE_OFF
&& resource->ref_count) {
INIT_LIST_HEAD(&device->wakeup_list);
INIT_LIST_HEAD(&device->physical_node_list);
mutex_init(&device->physical_node_lock);
- INIT_LIST_HEAD(&device->power_dependent);
new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
if (!new_bus_id) {
{
ata_acpi_clear_gtf(dev);
}
-
-void ata_scsi_acpi_bind(struct ata_device *dev)
-{
- acpi_handle handle = ata_dev_acpi_handle(dev);
- if (handle)
- acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev);
-}
-
-void ata_scsi_acpi_unbind(struct ata_device *dev)
-{
- acpi_handle handle = ata_dev_acpi_handle(dev);
- if (handle)
- acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev);
-}
if (!IS_ERR(sdev)) {
dev->sdev = sdev;
scsi_device_put(sdev);
- ata_scsi_acpi_bind(dev);
} else {
dev->sdev = NULL;
}
struct scsi_device *sdev;
unsigned long flags;
- ata_scsi_acpi_unbind(dev);
-
/* Alas, we need to grab scan_mutex to ensure SCSI device
* state doesn't change underneath us and thus
* scsi_device_get() always succeeds. The mutex locking can
extern void ata_acpi_bind_port(struct ata_port *ap);
extern void ata_acpi_bind_dev(struct ata_device *dev);
extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
-extern void ata_scsi_acpi_bind(struct ata_device *dev);
-extern void ata_scsi_acpi_unbind(struct ata_device *dev);
#else
static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
pm_message_t state) { }
static inline void ata_acpi_bind_port(struct ata_port *ap) {}
static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_bind(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {}
#endif
/* libata-scsi.c */
online_type = ONLINE_KEEP;
else if (!strncmp(buf, "offline", min_t(int, count, 7)))
online_type = -1;
- else
- return -EINVAL;
+ else {
+ ret = -EINVAL;
+ goto err;
+ }
switch (online_type) {
case ONLINE_KERNEL:
ret = -EINVAL; /* should never happen */
}
+err:
unlock_device_hotplug();
if (ret)
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/interrupt.h>
+#include <xen/xen.h>
#include <xen/events.h>
#include <xen/interface/io/tpmif.h>
#include <xen/grant_table.h>
static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
{
int max_perf, min_perf;
+ u64 val;
intel_pstate_get_min_max(cpu, &min_perf, &max_perf);
trace_cpu_frequency(pstate * 100000, cpu->cpu);
cpu->pstate.current_pstate = pstate;
+ val = pstate << 8;
if (limits.no_turbo)
- wrmsrl(MSR_IA32_PERF_CTL, BIT(32) | (pstate << 8));
- else
- wrmsrl(MSR_IA32_PERF_CTL, pstate << 8);
+ val |= (u64)1 << 32;
+ wrmsrl(MSR_IA32_PERF_CTL, val);
}
static inline void intel_pstate_pstate_increase(struct cpudata *cpu, int steps)
static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
{
- int rc, min_pstate, max_pstate;
struct cpudata *cpu;
+ int rc;
rc = intel_pstate_init_cpu(policy->cpu);
if (rc)
else
policy->policy = CPUFREQ_POLICY_POWERSAVE;
- intel_pstate_get_min_max(cpu, &min_pstate, &max_pstate);
- policy->min = min_pstate * 100000;
- policy->max = max_pstate * 100000;
+ policy->min = cpu->pstate.min_pstate * 100000;
+ policy->max = cpu->pstate.turbo_pstate * 100000;
/* cpuinfo and default policy values */
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * 100000;
if (freq->frequency == CPUFREQ_ENTRY_INVALID)
continue;
- dvfs = &s3c64xx_dvfs_table[freq->index];
+ dvfs = &s3c64xx_dvfs_table[freq->driver_data];
found = 0;
for (i = 0; i < count; i++) {
struct lp_gpio *lg = irq_data_get_irq_handler_data(data);
struct irq_chip *chip = irq_data_get_irq_chip(data);
u32 base, pin, mask;
- unsigned long reg, pending;
+ unsigned long reg, ena, pending;
unsigned virq;
/* check from GPIO controller which pin triggered the interrupt */
for (base = 0; base < lg->chip.ngpio; base += 32) {
reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT);
+ ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE);
- while ((pending = inl(reg))) {
+ while ((pending = (inl(reg) & inl(ena)))) {
pin = __ffs(pending);
mask = BIT(pin);
/* Clear before handling so we don't lose an edge */
*/
static int desc_to_gpio(const struct gpio_desc *desc)
{
- return desc->chip->base + gpio_chip_hwgpio(desc);
+ return desc - &gpio_desc[0];
}
int status = -EPROBE_DEFER;
unsigned long flags;
- if (!desc || !desc->chip) {
+ if (!desc) {
pr_warn("%s: invalid GPIO\n", __func__);
return -EINVAL;
}
spin_lock_irqsave(&gpio_lock, flags);
chip = desc->chip;
+ if (chip == NULL)
+ goto done;
if (!try_module_get(chip->owner))
goto done;
}
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
- if (indio_dev == NULL)
- return -ENOMEM;
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ goto error_disable_clk;
+ }
st = iio_priv(indio_dev);
indio_dev->currentmode = INDIO_DIRECT_MODE;
if (indio_dev->setup_ops->postdisable)
indio_dev->setup_ops->postdisable(indio_dev);
+
+ if (indio_dev->available_scan_masks == NULL)
+ kfree(indio_dev->active_scan_mask);
}
int iio_update_buffers(struct iio_dev *indio_dev,
return "C2_QP_STATE_ERROR";
default:
return "<invalid QP state>";
- };
+ }
}
void c2_ae_event(struct c2_dev *c2dev, u32 mq_index)
static int alloc_comp_eqs(struct mlx5_ib_dev *dev)
{
struct mlx5_eq_table *table = &dev->mdev.priv.eq_table;
+ char name[MLX5_MAX_EQ_NAME];
struct mlx5_eq *eq, *n;
int ncomp_vec;
int nent;
goto clean;
}
- snprintf(eq->name, MLX5_MAX_EQ_NAME, "mlx5_comp%d", i);
+ snprintf(name, MLX5_MAX_EQ_NAME, "mlx5_comp%d", i);
err = mlx5_create_map_eq(&dev->mdev, eq,
i + MLX5_EQ_VEC_COMP_BASE, nent, 0,
- eq->name,
- &dev->mdev.priv.uuari.uars[0]);
+ name, &dev->mdev.priv.uuari.uars[0]);
if (err) {
kfree(eq);
goto clean;
props->max_srq_sge = max_rq_sg - 1;
props->max_fast_reg_page_list_len = (unsigned int)-1;
props->local_ca_ack_delay = dev->mdev.caps.local_ca_ack_delay;
- props->atomic_cap = dev->mdev.caps.flags & MLX5_DEV_CAP_FLAG_ATOMIC ?
- IB_ATOMIC_HCA : IB_ATOMIC_NONE;
- props->masked_atomic_cap = IB_ATOMIC_HCA;
+ props->atomic_cap = IB_ATOMIC_NONE;
+ props->masked_atomic_cap = IB_ATOMIC_NONE;
props->max_pkeys = be16_to_cpup((__be16 *)(out_mad->data + 28));
props->max_mcast_grp = 1 << dev->mdev.caps.log_max_mcg;
props->max_mcast_qp_attach = dev->mdev.caps.max_qp_mcg;
ibev.device = &ibdev->ib_dev;
ibev.element.port_num = port;
+ if (port < 1 || port > ibdev->num_ports) {
+ mlx5_ib_warn(ibdev, "warning: event on port %d\n", port);
+ return;
+ }
+
if (ibdev->ib_active)
ib_dispatch_event(&ibev);
}
DEF_CACHE_SIZE = 10,
};
+enum {
+ MLX5_UMR_ALIGN = 2048
+};
+
static __be64 *mr_align(__be64 *ptr, int align)
{
unsigned long mask = align - 1;
static int add_keys(struct mlx5_ib_dev *dev, int c, int num)
{
- struct device *ddev = dev->ib_dev.dma_device;
struct mlx5_mr_cache *cache = &dev->cache;
struct mlx5_cache_ent *ent = &cache->ent[c];
struct mlx5_create_mkey_mbox_in *in;
struct mlx5_ib_mr *mr;
int npages = 1 << ent->order;
- int size = sizeof(u64) * npages;
int err = 0;
int i;
}
mr->order = ent->order;
mr->umred = 1;
- mr->pas = kmalloc(size + 0x3f, GFP_KERNEL);
- if (!mr->pas) {
- kfree(mr);
- err = -ENOMEM;
- goto out;
- }
- mr->dma = dma_map_single(ddev, mr_align(mr->pas, 0x40), size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(ddev, mr->dma)) {
- kfree(mr->pas);
- kfree(mr);
- err = -ENOMEM;
- goto out;
- }
-
in->seg.status = 1 << 6;
in->seg.xlt_oct_size = cpu_to_be32((npages + 1) / 2);
in->seg.qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
sizeof(*in));
if (err) {
mlx5_ib_warn(dev, "create mkey failed %d\n", err);
- dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE);
- kfree(mr->pas);
kfree(mr);
goto out;
}
static void remove_keys(struct mlx5_ib_dev *dev, int c, int num)
{
- struct device *ddev = dev->ib_dev.dma_device;
struct mlx5_mr_cache *cache = &dev->cache;
struct mlx5_cache_ent *ent = &cache->ent[c];
struct mlx5_ib_mr *mr;
- int size;
int err;
int i;
ent->size--;
spin_unlock(&ent->lock);
err = mlx5_core_destroy_mkey(&dev->mdev, &mr->mmr);
- if (err) {
+ if (err)
mlx5_ib_warn(dev, "failed destroy mkey\n");
- } else {
- size = ALIGN(sizeof(u64) * (1 << mr->order), 0x40);
- dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE);
- kfree(mr->pas);
+ else
kfree(mr);
- }
}
}
static void clean_keys(struct mlx5_ib_dev *dev, int c)
{
- struct device *ddev = dev->ib_dev.dma_device;
struct mlx5_mr_cache *cache = &dev->cache;
struct mlx5_cache_ent *ent = &cache->ent[c];
struct mlx5_ib_mr *mr;
- int size;
int err;
+ cancel_delayed_work(&ent->dwork);
while (1) {
spin_lock(&ent->lock);
if (list_empty(&ent->head)) {
ent->size--;
spin_unlock(&ent->lock);
err = mlx5_core_destroy_mkey(&dev->mdev, &mr->mmr);
- if (err) {
+ if (err)
mlx5_ib_warn(dev, "failed destroy mkey\n");
- } else {
- size = ALIGN(sizeof(u64) * (1 << mr->order), 0x40);
- dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE);
- kfree(mr->pas);
+ else
kfree(mr);
- }
}
}
int i;
dev->cache.stopped = 1;
- destroy_workqueue(dev->cache.wq);
+ flush_workqueue(dev->cache.wq);
mlx5_mr_cache_debugfs_cleanup(dev);
for (i = 0; i < MAX_MR_CACHE_ENTRIES; i++)
clean_keys(dev, i);
+ destroy_workqueue(dev->cache.wq);
+
return 0;
}
int page_shift, int order, int access_flags)
{
struct mlx5_ib_dev *dev = to_mdev(pd->device);
+ struct device *ddev = dev->ib_dev.dma_device;
struct umr_common *umrc = &dev->umrc;
struct ib_send_wr wr, *bad;
struct mlx5_ib_mr *mr;
struct ib_sge sg;
+ int size = sizeof(u64) * npages;
int err;
int i;
if (!mr)
return ERR_PTR(-EAGAIN);
- mlx5_ib_populate_pas(dev, umem, page_shift, mr_align(mr->pas, 0x40), 1);
+ mr->pas = kmalloc(size + MLX5_UMR_ALIGN - 1, GFP_KERNEL);
+ if (!mr->pas) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ mlx5_ib_populate_pas(dev, umem, page_shift,
+ mr_align(mr->pas, MLX5_UMR_ALIGN), 1);
+
+ mr->dma = dma_map_single(ddev, mr_align(mr->pas, MLX5_UMR_ALIGN), size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(ddev, mr->dma)) {
+ kfree(mr->pas);
+ err = -ENOMEM;
+ goto error;
+ }
memset(&wr, 0, sizeof(wr));
wr.wr_id = (u64)(unsigned long)mr;
wait_for_completion(&mr->done);
up(&umrc->sem);
+ dma_unmap_single(ddev, mr->dma, size, DMA_TO_DEVICE);
+ kfree(mr->pas);
+
if (mr->status != IB_WC_SUCCESS) {
mlx5_ib_warn(dev, "reg umr failed\n");
err = -EFAULT;
switch (qp_type) {
case IB_QPT_XRC_INI:
- size = sizeof(struct mlx5_wqe_xrc_seg);
+ size += sizeof(struct mlx5_wqe_xrc_seg);
/* fall through */
case IB_QPT_RC:
size += sizeof(struct mlx5_wqe_ctrl_seg) +
sizeof(struct mlx5_wqe_raddr_seg);
break;
+ case IB_QPT_XRC_TGT:
+ return 0;
+
case IB_QPT_UC:
- size = sizeof(struct mlx5_wqe_ctrl_seg) +
+ size += sizeof(struct mlx5_wqe_ctrl_seg) +
sizeof(struct mlx5_wqe_raddr_seg);
break;
case IB_QPT_UD:
case IB_QPT_SMI:
case IB_QPT_GSI:
- size = sizeof(struct mlx5_wqe_ctrl_seg) +
+ size += sizeof(struct mlx5_wqe_ctrl_seg) +
sizeof(struct mlx5_wqe_datagram_seg);
break;
case MLX5_IB_QPT_REG_UMR:
- size = sizeof(struct mlx5_wqe_ctrl_seg) +
+ size += sizeof(struct mlx5_wqe_ctrl_seg) +
sizeof(struct mlx5_wqe_umr_ctrl_seg) +
sizeof(struct mlx5_mkey_seg);
break;
return wqe_size;
if (wqe_size > dev->mdev.caps.max_sq_desc_sz) {
- mlx5_ib_dbg(dev, "\n");
+ mlx5_ib_dbg(dev, "wqe_size(%d) > max_sq_desc_sz(%d)\n",
+ wqe_size, dev->mdev.caps.max_sq_desc_sz);
return -EINVAL;
}
wq_size = roundup_pow_of_two(attr->cap.max_send_wr * wqe_size);
qp->sq.wqe_cnt = wq_size / MLX5_SEND_WQE_BB;
+ if (qp->sq.wqe_cnt > dev->mdev.caps.max_wqes) {
+ mlx5_ib_dbg(dev, "wqe count(%d) exceeds limits(%d)\n",
+ qp->sq.wqe_cnt, dev->mdev.caps.max_wqes);
+ return -ENOMEM;
+ }
qp->sq.wqe_shift = ilog2(MLX5_SEND_WQE_BB);
qp->sq.max_gs = attr->cap.max_send_sge;
- qp->sq.max_post = 1 << ilog2(wq_size / wqe_size);
+ qp->sq.max_post = wq_size / wqe_size;
+ attr->cap.max_send_wr = qp->sq.max_post;
return wq_size;
}
MLX5_QP_OPTPAR_Q_KEY,
[MLX5_QP_ST_MLX] = MLX5_QP_OPTPAR_PKEY_INDEX |
MLX5_QP_OPTPAR_Q_KEY,
+ [MLX5_QP_ST_XRC] = MLX5_QP_OPTPAR_ALT_ADDR_PATH |
+ MLX5_QP_OPTPAR_RRE |
+ MLX5_QP_OPTPAR_RAE |
+ MLX5_QP_OPTPAR_RWE |
+ MLX5_QP_OPTPAR_PKEY_INDEX,
},
},
[MLX5_QP_STATE_RTR] = {
[MLX5_QP_STATE_RTS] = {
[MLX5_QP_ST_UD] = MLX5_QP_OPTPAR_Q_KEY,
[MLX5_QP_ST_MLX] = MLX5_QP_OPTPAR_Q_KEY,
+ [MLX5_QP_ST_UC] = MLX5_QP_OPTPAR_RWE,
+ [MLX5_QP_ST_RC] = MLX5_QP_OPTPAR_RNR_TIMEOUT |
+ MLX5_QP_OPTPAR_RWE |
+ MLX5_QP_OPTPAR_RAE |
+ MLX5_QP_OPTPAR_RRE,
},
},
};
rseg->reserved = 0;
}
-static void set_atomic_seg(struct mlx5_wqe_atomic_seg *aseg, struct ib_send_wr *wr)
-{
- if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP) {
- aseg->swap_add = cpu_to_be64(wr->wr.atomic.swap);
- aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add);
- } else if (wr->opcode == IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) {
- aseg->swap_add = cpu_to_be64(wr->wr.atomic.compare_add);
- aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add_mask);
- } else {
- aseg->swap_add = cpu_to_be64(wr->wr.atomic.compare_add);
- aseg->compare = 0;
- }
-}
-
-static void set_masked_atomic_seg(struct mlx5_wqe_masked_atomic_seg *aseg,
- struct ib_send_wr *wr)
-{
- aseg->swap_add = cpu_to_be64(wr->wr.atomic.swap);
- aseg->swap_add_mask = cpu_to_be64(wr->wr.atomic.swap_mask);
- aseg->compare = cpu_to_be64(wr->wr.atomic.compare_add);
- aseg->compare_mask = cpu_to_be64(wr->wr.atomic.compare_add_mask);
-}
-
static void set_datagram_seg(struct mlx5_wqe_datagram_seg *dseg,
struct ib_send_wr *wr)
{
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
- set_raddr_seg(seg, wr->wr.atomic.remote_addr,
- wr->wr.atomic.rkey);
- seg += sizeof(struct mlx5_wqe_raddr_seg);
-
- set_atomic_seg(seg, wr);
- seg += sizeof(struct mlx5_wqe_atomic_seg);
-
- size += (sizeof(struct mlx5_wqe_raddr_seg) +
- sizeof(struct mlx5_wqe_atomic_seg)) / 16;
- break;
-
case IB_WR_MASKED_ATOMIC_CMP_AND_SWP:
- set_raddr_seg(seg, wr->wr.atomic.remote_addr,
- wr->wr.atomic.rkey);
- seg += sizeof(struct mlx5_wqe_raddr_seg);
-
- set_masked_atomic_seg(seg, wr);
- seg += sizeof(struct mlx5_wqe_masked_atomic_seg);
-
- size += (sizeof(struct mlx5_wqe_raddr_seg) +
- sizeof(struct mlx5_wqe_masked_atomic_seg)) / 16;
- break;
+ mlx5_ib_warn(dev, "Atomic operations are not supported yet\n");
+ err = -ENOSYS;
+ *bad_wr = wr;
+ goto out;
case IB_WR_LOCAL_INV:
next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL;
mlx5_vfree(in);
if (err) {
mlx5_ib_dbg(dev, "create SRQ failed, err %d\n", err);
- goto err_srq;
+ goto err_usr_kern_srq;
}
mlx5_ib_dbg(dev, "create SRQ with srqn 0x%x\n", srq->msrq.srqn);
err_core:
mlx5_core_destroy_srq(&dev->mdev, &srq->msrq);
+
+err_usr_kern_srq:
if (pd->uobject)
destroy_srq_user(pd, srq);
else
mthca_warn(dev, "Unhandled event %02x(%02x) on EQ %d\n",
eqe->type, eqe->subtype, eq->eqn);
break;
- };
+ }
set_eqe_hw(eqe);
++eq->cons_index;
return IB_QPS_SQE;
case OCRDMA_QPS_ERR:
return IB_QPS_ERR;
- };
+ }
return IB_QPS_ERR;
}
return OCRDMA_QPS_SQE;
case IB_QPS_ERR:
return OCRDMA_QPS_ERR;
- };
+ }
return OCRDMA_QPS_ERR;
}
break;
default:
return -EINVAL;
- };
+ }
cmd = ocrdma_init_emb_mqe(OCRDMA_CMD_CREATE_QP, sizeof(*cmd));
if (!cmd)
case BE_DEV_DOWN:
ocrdma_close(dev);
break;
- };
+ }
}
static struct ocrdma_driver ocrdma_drv = {
/* Unsupported */
*ib_speed = IB_SPEED_SDR;
*ib_width = IB_WIDTH_1X;
- };
+ }
}
default:
ibwc_status = IB_WC_GENERAL_ERR;
break;
- };
+ }
return ibwc_status;
}
pr_err("%s() invalid opcode received = 0x%x\n",
__func__, hdr->cw & OCRDMA_WQE_OPCODE_MASK);
break;
- };
+ }
}
static void ocrdma_set_cqe_status_flushed(struct ocrdma_qp *qp,
return NUM_SNAPSHOT_HDR_CHUNKS + ((ps->exceptions_per_area + 1) * area);
}
+static void skip_metadata(struct pstore *ps)
+{
+ uint32_t stride = ps->exceptions_per_area + 1;
+ chunk_t next_free = ps->next_free;
+ if (sector_div(next_free, stride) == NUM_SNAPSHOT_HDR_CHUNKS)
+ ps->next_free++;
+}
+
/*
* Read or write a metadata area. Remembering to skip the first
* chunk which holds the header.
ps->current_area--;
+ skip_metadata(ps);
+
return 0;
}
struct dm_exception *e)
{
struct pstore *ps = get_info(store);
- uint32_t stride;
- chunk_t next_free;
sector_t size = get_dev_size(dm_snap_cow(store->snap)->bdev);
/* Is there enough room ? */
* Move onto the next free pending, making sure to take
* into account the location of the metadata chunks.
*/
- stride = (ps->exceptions_per_area + 1);
- next_free = ++ps->next_free;
- if (sector_div(next_free, stride) == 1)
- ps->next_free++;
+ ps->next_free++;
+ skip_metadata(ps);
atomic_inc(&ps->pending_count);
return 0;
return 0;
}
-static void calc_block_sig(struct mlx5_cmd_prot_block *block, u8 token)
+static void calc_block_sig(struct mlx5_cmd_prot_block *block, u8 token,
+ int csum)
{
block->token = token;
- block->ctrl_sig = ~xor8_buf(block->rsvd0, sizeof(*block) - sizeof(block->data) - 2);
- block->sig = ~xor8_buf(block, sizeof(*block) - 1);
+ if (csum) {
+ block->ctrl_sig = ~xor8_buf(block->rsvd0, sizeof(*block) -
+ sizeof(block->data) - 2);
+ block->sig = ~xor8_buf(block, sizeof(*block) - 1);
+ }
}
-static void calc_chain_sig(struct mlx5_cmd_msg *msg, u8 token)
+static void calc_chain_sig(struct mlx5_cmd_msg *msg, u8 token, int csum)
{
struct mlx5_cmd_mailbox *next = msg->next;
while (next) {
- calc_block_sig(next->buf, token);
+ calc_block_sig(next->buf, token, csum);
next = next->next;
}
}
-static void set_signature(struct mlx5_cmd_work_ent *ent)
+static void set_signature(struct mlx5_cmd_work_ent *ent, int csum)
{
ent->lay->sig = ~xor8_buf(ent->lay, sizeof(*ent->lay));
- calc_chain_sig(ent->in, ent->token);
- calc_chain_sig(ent->out, ent->token);
+ calc_chain_sig(ent->in, ent->token, csum);
+ calc_chain_sig(ent->out, ent->token, csum);
}
static void poll_timeout(struct mlx5_cmd_work_ent *ent)
lay->type = MLX5_PCI_CMD_XPORT;
lay->token = ent->token;
lay->status_own = CMD_OWNER_HW;
- if (!cmd->checksum_disabled)
- set_signature(ent);
+ set_signature(ent, !cmd->checksum_disabled);
dump_command(dev, ent, 1);
ktime_get_ts(&ent->ts1);
copy = min_t(int, size, MLX5_CMD_DATA_BLOCK_SIZE);
block = next->buf;
- if (xor8_buf(block, sizeof(*block)) != 0xff)
- return -EINVAL;
memcpy(to, block->data, copy);
to += copy;
goto err_map;
}
+ cmd->checksum_disabled = 1;
cmd->max_reg_cmds = (1 << cmd->log_sz) - 1;
cmd->bitmask = (1 << cmd->max_reg_cmds) - 1;
case MLX5_CMD_STAT_BAD_SYS_STATE_ERR: return -EIO;
case MLX5_CMD_STAT_BAD_RES_ERR: return -EINVAL;
case MLX5_CMD_STAT_RES_BUSY: return -EBUSY;
- case MLX5_CMD_STAT_LIM_ERR: return -EINVAL;
+ case MLX5_CMD_STAT_LIM_ERR: return -ENOMEM;
case MLX5_CMD_STAT_BAD_RES_STATE_ERR: return -EINVAL;
case MLX5_CMD_STAT_IX_ERR: return -EINVAL;
case MLX5_CMD_STAT_NO_RES_ERR: return -EAGAIN;
goto err_in;
}
+ snprintf(eq->name, MLX5_MAX_EQ_NAME, "%s@pci:%s",
+ name, pci_name(dev->pdev));
eq->eqn = out.eq_number;
err = request_irq(table->msix_arr[vecidx].vector, mlx5_msix_handler, 0,
- name, eq);
+ eq->name, eq);
if (err)
goto err_eq;
struct mlx5_cmd_set_hca_cap_mbox_in *set_ctx = NULL;
struct mlx5_cmd_query_hca_cap_mbox_in query_ctx;
struct mlx5_cmd_set_hca_cap_mbox_out set_out;
- struct mlx5_profile *prof = dev->profile;
u64 flags;
- int csum = 1;
int err;
memset(&query_ctx, 0, sizeof(query_ctx));
memcpy(&set_ctx->hca_cap, &query_out->hca_cap,
sizeof(set_ctx->hca_cap));
- if (prof->mask & MLX5_PROF_MASK_CMDIF_CSUM) {
- csum = !!prof->cmdif_csum;
- flags = be64_to_cpu(set_ctx->hca_cap.flags);
- if (csum)
- flags |= MLX5_DEV_CAP_FLAG_CMDIF_CSUM;
- else
- flags &= ~MLX5_DEV_CAP_FLAG_CMDIF_CSUM;
-
- set_ctx->hca_cap.flags = cpu_to_be64(flags);
- }
-
if (dev->profile->mask & MLX5_PROF_MASK_QP_SIZE)
set_ctx->hca_cap.log_max_qp = dev->profile->log_max_qp;
+ flags = be64_to_cpu(query_out->hca_cap.flags);
+ /* disable checksum */
+ flags &= ~MLX5_DEV_CAP_FLAG_CMDIF_CSUM;
+
+ set_ctx->hca_cap.flags = cpu_to_be64(flags);
memset(&set_out, 0, sizeof(set_out));
set_ctx->hca_cap.log_uar_page_sz = cpu_to_be16(PAGE_SHIFT - 12);
set_ctx->hdr.opcode = cpu_to_be16(MLX5_CMD_OP_SET_HCA_CAP);
if (err)
goto query_ex;
- if (!csum)
- dev->cmd.checksum_disabled = 1;
-
query_ex:
kfree(query_out);
kfree(set_ctx);
__be64 pas[0];
};
+enum {
+ MAX_RECLAIM_TIME_MSECS = 5000,
+};
+
static int insert_page(struct mlx5_core_dev *dev, u64 addr, struct page *page, u16 func_id)
{
struct rb_root *root = &dev->priv.page_root;
int err;
int i;
+ if (nclaimed)
+ *nclaimed = 0;
+
memset(&in, 0, sizeof(in));
outlen = sizeof(*out) + npages * sizeof(out->pas[0]);
out = mlx5_vzalloc(outlen);
int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev)
{
- unsigned long end = jiffies + msecs_to_jiffies(5000);
+ unsigned long end = jiffies + msecs_to_jiffies(MAX_RECLAIM_TIME_MSECS);
struct fw_page *fwp;
struct rb_node *p;
+ int nclaimed = 0;
int err;
do {
p = rb_first(&dev->priv.page_root);
if (p) {
fwp = rb_entry(p, struct fw_page, rb_node);
- err = reclaim_pages(dev, fwp->func_id, optimal_reclaimed_pages(), NULL);
+ err = reclaim_pages(dev, fwp->func_id,
+ optimal_reclaimed_pages(),
+ &nclaimed);
if (err) {
mlx5_core_warn(dev, "failed reclaiming pages (%d)\n", err);
return err;
}
+ if (nclaimed)
+ end = jiffies + msecs_to_jiffies(MAX_RECLAIM_TIME_MSECS);
}
if (time_after(jiffies, end)) {
mlx5_core_warn(dev, "FW did not return all pages. giving up...\n");
depends on MTD
def_bool y
-config OF_RESERVED_MEM
- depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK))
- def_bool y
- help
- Initialization code for DMA reserved memory
-
endmenu # OF
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_MTD) += of_mtd.o
-obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
struct device_node *cpun, *cpus;
cpus = of_find_node_by_path("/cpus");
- if (!cpus) {
- pr_warn("Missing cpus node, bailing out\n");
+ if (!cpus)
return NULL;
- }
for_each_child_of_node(cpus, cpun) {
if (of_node_cmp(cpun->type, "cpu"))
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <linux/random.h>
#include <asm/setup.h> /* for COMMAND_LINE_SIZE */
#ifdef CONFIG_PPC
}
#endif /* CONFIG_OF_EARLY_FLATTREE */
-
-/* Feed entire flattened device tree into the random pool */
-static int __init add_fdt_randomness(void)
-{
- if (initial_boot_params)
- add_device_randomness(initial_boot_params,
- be32_to_cpu(initial_boot_params->totalsize));
-
- return 0;
-}
-core_initcall(add_fdt_randomness);
+++ /dev/null
-/*
- * Device tree based initialization code for reserved memory.
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License or (at your optional) any later version of the license.
- */
-
-#include <linux/memblock.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <linux/mm.h>
-#include <linux/sizes.h>
-#include <linux/mm_types.h>
-#include <linux/dma-contiguous.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_reserved_mem.h>
-
-#define MAX_RESERVED_REGIONS 16
-struct reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct cma *cma;
- char name[32];
-};
-static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
-static int reserved_mem_count;
-
-static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname,
- int depth, void *data)
-{
- struct reserved_mem *rmem = &reserved_mem[reserved_mem_count];
- phys_addr_t base, size;
- int is_cma, is_reserved;
- unsigned long len;
- const char *status;
- __be32 *prop;
-
- is_cma = IS_ENABLED(CONFIG_DMA_CMA) &&
- of_flat_dt_is_compatible(node, "linux,contiguous-memory-region");
- is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region");
-
- if (!is_reserved && !is_cma) {
- /* ignore node and scan next one */
- return 0;
- }
-
- status = of_get_flat_dt_prop(node, "status", &len);
- if (status && strcmp(status, "okay") != 0) {
- /* ignore disabled node nad scan next one */
- return 0;
- }
-
- prop = of_get_flat_dt_prop(node, "reg", &len);
- if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) *
- sizeof(__be32))) {
- pr_err("Reserved mem: node %s, incorrect \"reg\" property\n",
- uname);
- /* ignore node and scan next one */
- return 0;
- }
- base = dt_mem_next_cell(dt_root_addr_cells, &prop);
- size = dt_mem_next_cell(dt_root_size_cells, &prop);
-
- if (!size) {
- /* ignore node and scan next one */
- return 0;
- }
-
- pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n",
- uname, (unsigned long)base, (unsigned long)size / SZ_1M);
-
- if (reserved_mem_count == ARRAY_SIZE(reserved_mem))
- return -ENOSPC;
-
- rmem->base = base;
- rmem->size = size;
- strlcpy(rmem->name, uname, sizeof(rmem->name));
-
- if (is_cma) {
- struct cma *cma;
- if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) {
- rmem->cma = cma;
- reserved_mem_count++;
- if (of_get_flat_dt_prop(node,
- "linux,default-contiguous-region",
- NULL))
- dma_contiguous_set_default(cma);
- }
- } else if (is_reserved) {
- if (memblock_remove(base, size) == 0)
- reserved_mem_count++;
- else
- pr_err("Failed to reserve memory for %s\n", uname);
- }
-
- return 0;
-}
-
-static struct reserved_mem *get_dma_memory_region(struct device *dev)
-{
- struct device_node *node;
- const char *name;
- int i;
-
- node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (!node)
- return NULL;
-
- name = kbasename(node->full_name);
- for (i = 0; i < reserved_mem_count; i++)
- if (strcmp(name, reserved_mem[i].name) == 0)
- return &reserved_mem[i];
- return NULL;
-}
-
-/**
- * of_reserved_mem_device_init() - assign reserved memory region to given device
- *
- * This function assign memory region pointed by "memory-region" device tree
- * property to the given device.
- */
-void of_reserved_mem_device_init(struct device *dev)
-{
- struct reserved_mem *region = get_dma_memory_region(dev);
- if (!region)
- return;
-
- if (region->cma) {
- dev_set_cma_area(dev, region->cma);
- pr_info("Assigned CMA %s to %s device\n", region->name,
- dev_name(dev));
- } else {
- if (dma_declare_coherent_memory(dev, region->base, region->base,
- region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0)
- pr_info("Declared reserved memory %s to %s device\n",
- region->name, dev_name(dev));
- }
-}
-
-/**
- * of_reserved_mem_device_release() - release reserved memory device structures
- *
- * This function releases structures allocated for memory region handling for
- * the given device.
- */
-void of_reserved_mem_device_release(struct device *dev)
-{
- struct reserved_mem *region = get_dma_memory_region(dev);
- if (!region && !region->cma)
- dma_release_declared_memory(dev);
-}
-
-/**
- * early_init_dt_scan_reserved_mem() - create reserved memory regions
- *
- * This function grabs memory from early allocator for device exclusive use
- * defined in device tree structures. It should be called by arch specific code
- * once the early allocator (memblock) has been activated and all other
- * subsystems have already allocated/reserved memory.
- */
-void __init early_init_dt_scan_reserved_mem(void)
-{
- of_scan_flat_dt_by_path("/memory/reserved-memory",
- fdt_scan_reserved_mem, NULL);
-}
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/of_reserved_mem.h>
#include <linux/platform_device.h>
const struct of_device_id of_default_bus_match_table[] = {
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
- of_reserved_mem_device_init(&dev->dev);
-
/* We do not fill the DMA ops for platform devices by default.
* This is currently the responsibility of the platform code
* to do such, possibly using a device notifier
if (of_device_add(dev) != 0) {
platform_device_put(dev);
- of_reserved_mem_device_release(&dev->dev);
return NULL;
}
/*
* This bridge should have been registered as a hotplug function
- * under its parent, so the context has to be there. If not, we
- * are in deep goo.
+ * under its parent, so the context should be there, unless the
+ * parent is going to be handled by pciehp, in which case this
+ * bridge is not interesting to us either.
*/
mutex_lock(&acpiphp_context_lock);
context = acpiphp_get_context(handle);
- if (WARN_ON(!context)) {
+ if (!context) {
mutex_unlock(&acpiphp_context_lock);
put_device(&bus->dev);
+ pci_dev_put(bridge->pci_dev);
kfree(bridge);
return;
}
config SPI_FSL_DSPI
tristate "Freescale DSPI controller"
select SPI_BITBANG
+ depends on SOC_VF610 || COMPILE_TEST
help
This enables support for the Freescale DSPI controller in master
mode. VF610 platform uses the controller.
platform_set_drvdata(pdev, hw);
/* setup the state for the bitbang driver */
- hw->bitbang.master = spi_master_get(master);
+ hw->bitbang.master = master;
if (!hw->bitbang.master)
return err;
hw->bitbang.chipselect = altera_spi_chipsel;
master->num_chipselect = pdata->num_chipselect;
}
- sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master = master;
sp->bitbang.chipselect = ath79_spi_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
/* Bit manipulation macros */
#define SPI_BIT(name) \
(1 << SPI_##name##_OFFSET)
-#define SPI_BF(name,value) \
+#define SPI_BF(name, value) \
(((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
-#define SPI_BFEXT(name,value) \
+#define SPI_BFEXT(name, value) \
(((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
-#define SPI_BFINS(name,value,old) \
- ( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
- | SPI_BF(name,value))
+#define SPI_BFINS(name, value, old) \
+ (((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
+ | SPI_BF(name, value))
/* Register access macros */
-#define spi_readl(port,reg) \
+#define spi_readl(port, reg) \
__raw_readl((port)->regs + SPI_##reg)
-#define spi_writel(port,reg,value) \
+#define spi_writel(port, reg, value) \
__raw_writel((value), (port)->regs + SPI_##reg)
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
asd = spi->controller_state;
bits = (asd->csr >> 4) & 0xf;
if (bits != xfer->bits_per_word - 8) {
- dev_dbg(&spi->dev, "you can't yet change "
- "bits_per_word in transfers\n");
+ dev_dbg(&spi->dev,
+ "you can't yet change bits_per_word in transfers\n");
return -ENOPROTOOPT;
}
}
/* setup spi core then atmel-specific driver state */
ret = -ENOMEM;
- master = spi_alloc_master(&pdev->dev, sizeof *as);
+ master = spi_alloc_master(&pdev->dev, sizeof(*as));
if (!master)
goto out_free;
INIT_LIST_HEAD(&as->queue);
as->pdev = pdev;
- as->regs = ioremap(regs->start, resource_size(regs));
- if (!as->regs)
+ as->regs = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(as->regs)) {
+ ret = PTR_ERR(as->regs);
goto out_free_buffer;
+ }
as->phybase = regs->start;
as->irq = irq;
as->clk = clk;
out_free_irq:
free_irq(irq, master);
out_unmap_regs:
- iounmap(as->regs);
out_free_buffer:
if (!as->use_pdc)
tasklet_kill(&as->tasklet);
clk_disable_unprepare(as->clk);
clk_put(as->clk);
free_irq(as->irq, master);
- iounmap(as->regs);
spi_unregister_master(master);
return 0;
}
-#ifdef CONFIG_PM
-
-static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int atmel_spi_suspend(struct device *dev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = dev_get_drvdata(dev);
struct atmel_spi *as = spi_master_get_devdata(master);
clk_disable_unprepare(as->clk);
return 0;
}
-static int atmel_spi_resume(struct platform_device *pdev)
+static int atmel_spi_resume(struct device *dev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = dev_get_drvdata(dev);
struct atmel_spi *as = spi_master_get_devdata(master);
- return clk_prepare_enable(as->clk);
+ clk_prepare_enable(as->clk);
return 0;
}
+static SIMPLE_DEV_PM_OPS(atmel_spi_pm_ops, atmel_spi_suspend, atmel_spi_resume);
+
+#define ATMEL_SPI_PM_OPS (&atmel_spi_pm_ops)
#else
-#define atmel_spi_suspend NULL
-#define atmel_spi_resume NULL
+#define ATMEL_SPI_PM_OPS NULL
#endif
#if defined(CONFIG_OF)
.driver = {
.name = "atmel_spi",
.owner = THIS_MODULE,
+ .pm = ATMEL_SPI_PM_OPS,
.of_match_table = of_match_ptr(atmel_spi_dt_ids),
},
- .suspend = atmel_spi_suspend,
- .resume = atmel_spi_resume,
.probe = atmel_spi_probe,
.remove = atmel_spi_remove,
};
hw = spi_master_get_devdata(master);
- hw->master = spi_master_get(master);
+ hw->master = master;
hw->pdata = dev_get_platdata(&pdev->dev);
hw->dev = &pdev->dev;
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
- err = spi_register_master(master);
+ err = devm_spi_register_master(&pdev->dev, master);
if (err) {
dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
goto out_free_irq;
struct bcm2835_spi *bs = spi_master_get_devdata(master);
free_irq(bs->irq, master);
- spi_unregister_master(master);
/* Clear FIFOs, and disable the HW block */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
clk_disable_unprepare(bs->clk);
- spi_master_put(master);
return 0;
}
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
/* register and we are done */
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(dev, master);
if (ret) {
dev_err(dev, "spi register failed\n");
goto out_clk_disable;
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- spi_unregister_master(master);
-
/* reset spi block */
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
clk_disable_unprepare(bs->clk);
clk_put(bs->clk);
- spi_master_put(master);
-
return 0;
}
*/
if (chip_info->ctl_reg || chip_info->enable_dma) {
ret = -EINVAL;
- dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields");
+ dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields\n");
goto error;
}
chip->cs_chg_udelay = chip_info->cs_chg_udelay;
return 0;
}
-#ifdef CONFIG_PM
-static int
-bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int bfin_sport_spi_suspend(struct device *dev)
{
- struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev);
+ struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev);
int status;
status = bfin_sport_spi_stop_queue(drv_data);
return status;
}
-static int
-bfin_sport_spi_resume(struct platform_device *pdev)
+static int bfin_sport_spi_resume(struct device *dev)
{
- struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev);
+ struct bfin_sport_spi_master_data *drv_data = dev_get_drvdata(dev);
int status;
/* Enable the SPI interface */
return status;
}
+
+static SIMPLE_DEV_PM_OPS(bfin_sport_spi_pm_ops, bfin_sport_spi_suspend,
+ bfin_sport_spi_resume);
+
+#define BFIN_SPORT_SPI_PM_OPS (&bfin_sport_spi_pm_ops)
#else
-# define bfin_sport_spi_suspend NULL
-# define bfin_sport_spi_resume NULL
+#define BFIN_SPORT_SPI_PM_OPS NULL
#endif
static struct platform_driver bfin_sport_spi_driver = {
.driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = BFIN_SPORT_SPI_PM_OPS,
},
.probe = bfin_sport_spi_probe,
.remove = bfin_sport_spi_remove,
- .suspend = bfin_sport_spi_suspend,
- .resume = bfin_sport_spi_resume,
};
module_platform_driver(bfin_sport_spi_driver);
tasklet_init(&drv_data->pump_transfers,
bfin_spi_pump_transfers, (unsigned long)drv_data);
/* register with the SPI framework */
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(dev, master);
if (ret) {
dev_err(dev, "can not register spi master\n");
goto err_free_peripheral;
free_dma(drv_data->rx_dma);
free_dma(drv_data->tx_dma);
- spi_unregister_master(drv_data->master);
return 0;
}
timeout = jiffies + HZ;
while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
if (!time_before(jiffies, timeout)) {
- dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");
+ dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
break;
} else
cpu_relax();
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
struct spi_transfer, transfer_list);
- dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
- "state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "got a message to pump, state is set to: baud "
+ "%d, flag 0x%x, ctl 0x%x\n",
drv_data->cur_chip->baud, drv_data->cur_chip->flag,
drv_data->cur_chip->ctl_reg);
* but let's assume (for now) they do.
*/
if (chip_info->ctl_reg & ~bfin_ctl_reg) {
- dev_err(&spi->dev, "do not set bits in ctl_reg "
- "that the SPI framework manages\n");
+ dev_err(&spi->dev,
+ "do not set bits in ctl_reg that the SPI framework manages\n");
goto error;
}
chip->enable_dma = chip_info->enable_dma != 0
chip->chip_select_num = spi->chip_select;
if (chip->chip_select_num < MAX_CTRL_CS) {
if (!(spi->mode & SPI_CPHA))
- dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
- " Slave Select not under software control!\n"
- " See Documentation/blackfin/bfin-spi-notes.txt");
+ dev_warn(&spi->dev,
+ "Warning: SPI CPHA not set: Slave Select not under software control!\n"
+ "See Documentation/blackfin/bfin-spi-notes.txt\n");
chip->flag = (1 << spi->chip_select) << 8;
} else
chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
if (chip->enable_dma && chip->pio_interrupt) {
- dev_err(&spi->dev, "enable_dma is set, "
- "do not set pio_interrupt\n");
+ dev_err(&spi->dev,
+ "enable_dma is set, do not set pio_interrupt\n");
goto error;
}
/*
return 0;
}
-#ifdef CONFIG_PM
-static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int bfin_spi_suspend(struct device *dev)
{
- struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
+ struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
int status = 0;
status = bfin_spi_stop_queue(drv_data);
return 0;
}
-static int bfin_spi_resume(struct platform_device *pdev)
+static int bfin_spi_resume(struct device *dev)
{
- struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev);
+ struct bfin_spi_master_data *drv_data = dev_get_drvdata(dev);
int status = 0;
bfin_write(&drv_data->regs->ctl, drv_data->ctrl_reg);
/* Start the queue running */
status = bfin_spi_start_queue(drv_data);
if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ dev_err(dev, "problem starting queue (%d)\n", status);
return status;
}
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(bfin_spi_pm_ops, bfin_spi_suspend, bfin_spi_resume);
+
+#define BFIN_SPI_PM_OPS (&bfin_spi_pm_ops)
#else
-#define bfin_spi_suspend NULL
-#define bfin_spi_resume NULL
-#endif /* CONFIG_PM */
+#define BFIN_SPI_PM_OPS NULL
+#endif
MODULE_ALIAS("platform:bfin-spi");
static struct platform_driver bfin_spi_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .pm = BFIN_SPI_PM_OPS,
},
- .suspend = bfin_spi_suspend,
- .resume = bfin_spi_resume,
+ .probe = bfin_spi_probe,
.remove = bfin_spi_remove,
};
static int __init bfin_spi_init(void)
{
- return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe);
+ return platform_driver_register(&bfin_spi_driver);
}
subsys_initcall(bfin_spi_init);
bitbang = spi_master_get_devdata(spi->master);
if (!cs) {
- cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
static int spi_bitbang_prepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang;
+ struct spi_bitbang *bitbang;
unsigned long flags;
bitbang = spi_master_get_devdata(spi);
static int spi_bitbang_transfer_one(struct spi_master *master,
struct spi_message *m)
{
- struct spi_bitbang *bitbang;
+ struct spi_bitbang *bitbang;
unsigned nsecs;
struct spi_transfer *t = NULL;
unsigned cs_change;
cs_change = 1;
status = 0;
- list_for_each_entry (t, &m->transfers, transfer_list) {
+ list_for_each_entry(t, &m->transfers, transfer_list) {
/* override speed or wordsize? */
if (t->speed_hz || t->bits_per_word)
if (t->delay_usecs)
udelay(t->delay_usecs);
- if (cs_change && !list_is_last(&t->transfer_list, &m->transfers)) {
+ if (cs_change &&
+ !list_is_last(&t->transfer_list, &m->transfers)) {
/* sometimes a short mid-message deselect of the chip
* may be needed to terminate a mode or command
*/
static int spi_bitbang_unprepare_hardware(struct spi_master *spi)
{
- struct spi_bitbang *bitbang;
+ struct spi_bitbang *bitbang;
unsigned long flags;
bitbang = spi_master_get_devdata(spi);
* This routine registers the spi_master, which will process requests in a
* dedicated task, keeping IRQs unblocked most of the time. To stop
* processing those requests, call spi_bitbang_stop().
+ *
+ * On success, this routine will take a reference to master. The caller is
+ * responsible for calling spi_bitbang_stop() to decrement the reference and
+ * spi_master_put() as counterpart of spi_alloc_master() to prevent a memory
+ * leak.
*/
int spi_bitbang_start(struct spi_bitbang *bitbang)
{
struct spi_master *master = bitbang->master;
+ int ret;
if (!master || !bitbang->chipselect)
return -EINVAL;
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
*/
- return spi_register_master(master);
+ ret = spi_register_master(spi_master_get(master));
+ if (ret)
+ spi_master_put(master);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(spi_bitbang_start);
/* we only needed to implement one mode here, and choose SPI_MODE_0 */
-#define spidelay(X) do{}while(0)
-//#define spidelay ndelay
+#define spidelay(X) do { } while (0)
+/* #define spidelay ndelay */
#include "spi-bitbang-txrx.h"
/* sector 0 = 8 pages * 264 bytes/page (1 block)
* sector 1 = 248 pages * 264 bytes/page
*/
- .name = "bookkeeping", // 66 KB
+ .name = "bookkeeping", /* 66 KB */
.offset = 0,
.size = (8 + 248) * 264,
-// .mask_flags = MTD_WRITEABLE,
+ /* .mask_flags = MTD_WRITEABLE, */
}, {
/* sector 2 = 256 pages * 264 bytes/page
* sectors 3-5 = 512 pages * 264 bytes/page
*/
- .name = "filesystem", // 462 KB
+ .name = "filesystem", /* 462 KB */
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
} };
* and no way to be selective about what it binds to.
*/
- master = spi_alloc_master(dev, sizeof *pp);
+ master = spi_alloc_master(dev, sizeof(*pp));
if (!master) {
status = -ENOMEM;
goto done;
master->bus_num = 42;
master->num_chipselect = 2;
- pp->bitbang.master = spi_master_get(master);
+ pp->bitbang.master = master;
pp->bitbang.chipselect = butterfly_chipselect;
pp->bitbang.txrx_word[SPI_MODE_0] = butterfly_txrx_word_mode0;
pr_debug("%s: dataflash at %s\n", p->name,
dev_name(&pp->dataflash->dev));
- // dev_info(_what?_, ...)
pr_info("%s: AVR Butterfly\n", p->name);
butterfly = pp;
return;
dev_name(&pdev->dev), hw);
if (ret) {
dev_err(&pdev->dev, "Can't request IRQ\n");
- goto clk_out;
+ goto err_out;
}
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (!ret) {
dev_info(&pdev->dev,
"SPI bus driver initialized. Master clock %u Hz\n",
dev_err(&pdev->dev, "Failed to register master\n");
-clk_out:
err_out:
while (--i >= 0)
if (gpio_is_valid(hw->chipselect[i]))
if (gpio_is_valid(hw->chipselect[i]))
gpio_free(hw->chipselect[i]);
- spi_unregister_master(master);
-
return 0;
}
struct davinci_spi *dspi;
struct davinci_spi_config *spicfg;
u8 bits_per_word = 0;
- u32 hz = 0, spifmt = 0, prescale = 0;
+ u32 hz = 0, spifmt = 0;
+ int prescale;
dspi = spi_master_get_devdata(spi->master);
spicfg = (struct davinci_spi_config *)spi->controller_data;
if (ret)
goto unmap_io;
- dspi->bitbang.master = spi_master_get(master);
+ dspi->bitbang.master = master;
if (dspi->bitbang.master == NULL) {
ret = -ENODEV;
goto irq_free;
dspi->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dspi->clk)) {
ret = -ENODEV;
- goto put_master;
+ goto irq_free;
}
clk_prepare_enable(dspi->clk);
free_clk:
clk_disable_unprepare(dspi->clk);
clk_put(dspi->clk);
-put_master:
- spi_master_put(master);
irq_free:
free_irq(dspi->irq, dspi);
unmap_io:
release_region:
release_mem_region(dspi->pbase, resource_size(r));
free_master:
- kfree(master);
+ spi_master_put(master);
err:
return ret;
}
clk_disable_unprepare(dspi->clk);
clk_put(dspi->clk);
- spi_master_put(master);
free_irq(dspi->irq, dspi);
iounmap(dspi->base);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(dspi->pbase, resource_size(r));
+ spi_master_put(master);
return 0;
}
dwsmmio->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dwsmmio->clk)) {
ret = PTR_ERR(dwsmmio->clk);
- goto err_irq;
+ goto err_unmap;
}
clk_enable(dwsmmio->clk);
clk_disable(dwsmmio->clk);
clk_put(dwsmmio->clk);
dwsmmio->clk = NULL;
-err_irq:
- free_irq(dws->irq, dws);
err_unmap:
iounmap(dws->regs);
err_release_reg:
clk_put(dwsmmio->clk);
dwsmmio->clk = NULL;
- free_irq(dwsmmio->dws.irq, &dwsmmio->dws);
dw_spi_remove_host(&dwsmmio->dws);
iounmap(dwsmmio->dws.regs);
kfree(dwsmmio);
int pci_bar = 0;
int ret;
- printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n",
+ dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
pdev->vendor, pdev->device);
ret = pci_enable_device(pdev);
{
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
- pci_set_drvdata(pdev, NULL);
dw_spi_remove_host(&dwpci->dws);
iounmap(dwpci->dws.regs);
pci_release_region(pdev, 0);
/* Remove the queue */
status = destroy_queue(dws);
if (status != 0)
- dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
- "complete, message memory not freed\n");
+ dev_err(&dws->master->dev,
+ "dw_spi_remove: workqueue will not complete, message memory not freed\n");
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
return IRQ_HANDLED;
}
-static const struct efm32_spi_pdata efm32_spi_pdata_default = {
- .location = 1,
-};
-
static u32 efm32_spi_get_configured_location(struct efm32_spi_ddata *ddata)
{
u32 reg = efm32_spi_read32(ddata, REG_ROUTE);
ddata = spi_master_get_devdata(master);
- ddata->bitbang.master = spi_master_get(master);
+ ddata->bitbang.master = master;
ddata->bitbang.chipselect = efm32_spi_chipselect;
ddata->bitbang.setup_transfer = efm32_spi_setup_transfer;
ddata->bitbang.txrx_bufs = efm32_spi_txrx_bufs;
goto err;
}
- if (resource_size(res) < 60) {
+ if (resource_size(res) < 0x60) {
ret = -EINVAL;
dev_err(&pdev->dev, "memory resource too small\n");
goto err;
clk_disable_unprepare(ddata->clk);
err:
spi_master_put(master);
- kfree(master);
}
return ret;
struct spi_master *master = platform_get_drvdata(pdev);
struct efm32_spi_ddata *ddata = spi_master_get_devdata(master);
+ spi_bitbang_stop(&ddata->bitbang);
+
efm32_spi_write32(ddata, 0, REG_IEN);
free_irq(ddata->txirq, ddata);
free_irq(ddata->rxirq, ddata);
clk_disable_unprepare(ddata->clk);
spi_master_put(master);
- kfree(master);
return 0;
}
dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
chip->spi->mode, div_cpsr, div_scr, dss);
- dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);
+ dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
ep93xx_spi_write_u16(espi, SSPCR0, cr0);
}
if (WARN_ON(len)) {
- dev_warn(&espi->pdev->dev, "len = %zu expected 0!", len);
+ dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
return ERR_PTR(-EINVAL);
}
/* make sure that the hardware is disabled */
ep93xx_spi_write_u8(espi, SSPCR1, 0);
- error = spi_register_master(master);
+ error = devm_spi_register_master(&pdev->dev, master);
if (error) {
dev_err(&pdev->dev, "failed to register SPI master\n");
goto fail_free_dma;
ep93xx_spi_release_dma(espi);
- spi_unregister_master(master);
return 0;
}
switch (mspi->subblock) {
default:
- dev_warn(dev, "cell-index unspecified, assuming SPI1");
+ dev_warn(dev, "cell-index unspecified, assuming SPI1\n");
/* fall through */
case 0:
mspi->subblock = QE_CR_SUBBLOCK_SPI1;
struct spi_bitbang bitbang;
struct platform_device *pdev;
- void *base;
+ void __iomem *base;
int irq;
struct clk *clk;
}
}
- pr_warn("Can not find valid buad rate,speed_hz is %d,clkrate is %ld\
+ pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\
,we use the max prescaler value.\n", speed_hz, clkrate);
*pbr = ARRAY_SIZE(pbr_tbl) - 1;
*br = ARRAY_SIZE(brs) - 1;
dspi = spi_master_get_devdata(master);
dspi->pdev = pdev;
- dspi->bitbang.master = spi_master_get(master);
+ dspi->bitbang.master = master;
dspi->bitbang.chipselect = dspi_chipselect;
dspi->bitbang.setup_transfer = dspi_setup_transfer;
dspi->bitbang.txrx_bufs = dspi_txrx_transfer;
clk_disable_unprepare(dspi->clk);
out_master_put:
spi_master_put(master);
- platform_set_drvdata(pdev, NULL);
return ret;
}
/* Disconnect from the SPI framework */
spi_bitbang_stop(&dspi->bitbang);
+ clk_disable_unprepare(dspi->clk);
spi_master_put(dspi->bitbang.master);
return 0;
module_platform_driver(fsl_dspi_driver);
MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
if ((first->bits_per_word != t->bits_per_word) ||
(first->speed_hz != t->speed_hz)) {
espi_trans->status = -EINVAL;
- dev_err(mspi->dev, "bits_per_word/speed_hz should be"
- " same for the same SPI transfer\n");
+ dev_err(mspi->dev,
+ "bits_per_word/speed_hz should be same for the same SPI transfer\n");
return;
}
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
}
#endif
- spi_gpio->bitbang.master = spi_master_get(master);
+ spi_gpio->bitbang.master = master;
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
status = spi_bitbang_start(&spi_gpio->bitbang);
if (status < 0) {
- spi_master_put(spi_gpio->bitbang.master);
gpio_free:
if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
gpio_free(SPI_MISO_GPIO);
/* stop() unregisters child devices too */
status = spi_bitbang_stop(&spi_gpio->bitbang);
- spi_master_put(spi_gpio->bitbang.master);
if (SPI_MISO_GPIO != SPI_GPIO_NO_MISO)
gpio_free(SPI_MISO_GPIO);
if (SPI_MOSI_GPIO != SPI_GPIO_NO_MOSI)
gpio_free(SPI_MOSI_GPIO);
gpio_free(SPI_SCK_GPIO);
+ spi_master_put(spi_gpio->bitbang.master);
return status;
}
master->num_chipselect = num_cs;
spi_imx = spi_master_get_devdata(master);
- spi_imx->bitbang.master = spi_master_get(master);
+ spi_imx->bitbang.master = master;
for (i = 0; i < master->num_chipselect; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
/*
* SPI and bitbang hookup.
*/
- pp->bitbang.master = spi_master_get(master);
+ pp->bitbang.master = master;
pp->bitbang.chipselect = lm70_chipselect;
pp->bitbang.txrx_word[SPI_MODE_0] = lm70_txrx;
pp->bitbang.flags = SPI_3WIRE;
if (ret < 0)
goto free_clock;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(dev, master);
if (ret < 0)
goto free_clock;
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
- spi_unregister_master(master);
clk_disable_unprepare(mps->clk_mclk);
free_irq(mps->irq, mps);
if (mps->psc)
iounmap(mps->psc);
- spi_master_put(master);
return 0;
}
mps->irq = irq;
if (pdata == NULL) {
- dev_warn(dev, "probe called without platform data, no "
- "cs_control function will be called\n");
+ dev_warn(dev,
+ "probe called without platform data, no cs_control function will be called\n");
mps->cs_control = NULL;
mps->sysclk = 0;
master->bus_num = bus_num;
platform_set_drvdata(pdev, master);
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
goto out_disable_clk;
spi = spi_master_get_devdata(master);
ssp = &spi->ssp;
- spi_unregister_master(master);
clk_disable_unprepare(ssp->clk);
dma_release_channel(ssp->dmach);
- spi_master_put(master);
return 0;
}
}
hw = spi_master_get_devdata(master);
- hw->master = spi_master_get(master);
+ hw->master = master;
hw->pdata = dev_get_platdata(&pdev->dev);
hw->dev = &pdev->dev;
kfree(hw->ioarea);
err_pdata:
spi_master_put(hw->master);
-
err_nomem:
return err;
}
platform_set_drvdata(pdev, hw);
/* setup the state for the bitbang driver */
- hw->bitbang.master = spi_master_get(master);
+ hw->bitbang.master = master;
if (!hw->bitbang.master)
return err;
hw->bitbang.setup_transfer = tiny_spi_setup_transfer;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->dev.of_node = pdev->dev.of_node;
- err = spi_register_master(master);
+ err = devm_spi_register_master(&pdev->dev, master);
if (err) {
dev_err(&pdev->dev, "register master failed: %d\n", err);
goto fail;
struct octeon_spi *p = spi_master_get_devdata(master);
u64 register_base = p->register_base;
- spi_unregister_master(master);
-
/* Clear the CSENA* and put everything in a known state. */
cvmx_write_csr(register_base + OCTEON_SPI_CFG, 0);
goto err;
}
- status = spi_register_master(master);
+ status = devm_spi_register_master(&pdev->dev, master);
if (status < 0)
goto err;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- spi_unregister_master(master);
-
return 0;
}
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
unsigned int wcnt;
- int fifo_depth, bytes_per_word;
+ int max_fifo_depth, fifo_depth, bytes_per_word;
u32 chconf, xferlevel;
mcspi = spi_master_get_devdata(master);
if (t->len % bytes_per_word != 0)
goto disable_fifo;
- fifo_depth = gcd(t->len, OMAP2_MCSPI_MAX_FIFODEPTH);
+ if (t->rx_buf != NULL && t->tx_buf != NULL)
+ max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
+ else
+ max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
+
+ fifo_depth = gcd(t->len, max_fifo_depth);
if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
goto disable_fifo;
if (t->rx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFER;
xferlevel |= (fifo_depth - 1) << 8;
- } else {
+ }
+ if (t->tx_buf != NULL) {
chconf |= OMAP2_MCSPI_CHCONF_FFET;
xferlevel |= fifo_depth - 1;
}
((u32 *)xfer->rx_buf)[elements++] = w;
} else {
int bytes_per_word = mcspi_bytes_per_word(word_len);
- dev_err(&spi->dev, "DMA RX penultimate word empty");
+ dev_err(&spi->dev, "DMA RX penultimate word empty\n");
count -= (bytes_per_word << 1);
omap2_mcspi_set_enable(spi, 1);
return count;
else /* word_len <= 32 */
((u32 *)xfer->rx_buf)[elements] = w;
} else {
- dev_err(&spi->dev, "DMA RX last word empty");
+ dev_err(&spi->dev, "DMA RX last word empty\n");
count -= mcspi_bytes_per_word(word_len);
}
omap2_mcspi_set_enable(spi, 1);
if (status < 0)
goto disable_pm;
- status = spi_register_master(master);
+ status = devm_spi_register_master(&pdev->dev, master);
if (status < 0)
goto disable_pm;
pm_runtime_put_sync(mcspi->dev);
pm_runtime_disable(&pdev->dev);
- spi_unregister_master(master);
kfree(dma_channels);
return 0;
goto out_rel_clk;
master->dev.of_node = pdev->dev.of_node;
- status = spi_register_master(master);
+ status = devm_spi_register_master(&pdev->dev, master);
if (status < 0)
goto out_rel_clk;
clk_disable_unprepare(spi->clk);
clk_put(spi->clk);
- spi_unregister_master(master);
-
return 0;
}
dev_err(&pl022->adev->dev,
"RX FIFO Trigger Level is configured incorrectly\n");
return -EINVAL;
- break;
}
switch (chip_info->tx_lev_trig) {
case SSP_TX_1_OR_MORE_EMPTY_LOC:
dev_err(&pl022->adev->dev,
"TX FIFO Trigger Level is configured incorrectly\n");
return -EINVAL;
- break;
}
if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
if ((chip_info->ctrl_len < SSP_BITS_4)
/* Register with the SPI framework */
amba_set_drvdata(adev, pl022);
- status = spi_register_master(master);
+ status = devm_spi_register_master(&adev->dev, master);
if (status != 0) {
dev_err(&adev->dev,
"probe - problem registering spi master\n");
clk_unprepare(pl022->clk);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
- spi_unregister_master(pl022->master);
- amba_set_drvdata(adev, NULL);
return 0;
}
master->dev.of_node = np;
platform_set_drvdata(op, master);
hw = spi_master_get_devdata(master);
- hw->master = spi_master_get(master);
+ hw->master = master;
hw->dev = dev;
init_completion(&hw->done);
free_irq(hw->irqnum, hw);
iounmap(hw->regs);
free_gpios(hw);
+ spi_master_put(master);
return 0;
}
write_SSTO(0, reg);
write_SSSR_CS(drv_data, drv_data->clear_sr);
- dev_err(&drv_data->pdev->dev, "bad message state "
- "in interrupt handler\n");
+ dev_err(&drv_data->pdev->dev,
+ "bad message state in interrupt handler\n");
/* Never fail */
return IRQ_HANDLED;
if (message->is_dma_mapped
|| transfer->rx_dma || transfer->tx_dma) {
dev_err(&drv_data->pdev->dev,
- "pump_transfers: mapped transfer length "
- "of %u is greater than %d\n",
+ "pump_transfers: mapped transfer length of "
+ "%u is greater than %d\n",
transfer->len, MAX_DMA_LEN);
message->status = -EINVAL;
giveback(drv_data);
}
/* warn ... we force this to PIO mode */
- if (printk_ratelimit())
- dev_warn(&message->spi->dev, "pump_transfers: "
- "DMA disabled for transfer length %ld "
- "greater than %d\n",
- (long)drv_data->len, MAX_DMA_LEN);
+ dev_warn_ratelimited(&message->spi->dev,
+ "pump_transfers: DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
message->spi,
bits, &dma_burst,
&dma_thresh))
- if (printk_ratelimit())
- dev_warn(&message->spi->dev,
- "pump_transfers: "
- "DMA burst size reduced to "
- "match bits_per_word\n");
+ dev_warn_ratelimited(&message->spi->dev,
+ "pump_transfers: DMA burst size reduced to match bits_per_word\n");
}
cr0 = clk_div
if (gpio_is_valid(chip_info->gpio_cs)) {
err = gpio_request(chip_info->gpio_cs, "SPI_CS");
if (err) {
- dev_err(&spi->dev, "failed to request chip select "
- "GPIO%d\n", chip_info->gpio_cs);
+ dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
+ chip_info->gpio_cs);
return err;
}
if (drv_data->ssp_type == CE4100_SSP) {
if (spi->chip_select > 4) {
- dev_err(&spi->dev, "failed setup: "
- "cs number must not be > 4.\n");
+ dev_err(&spi->dev,
+ "failed setup: cs number must not be > 4.\n");
kfree(chip);
return -EINVAL;
}
spi->bits_per_word,
&chip->dma_burst_size,
&chip->dma_threshold)) {
- dev_warn(&spi->dev, "in setup: DMA burst size reduced "
- "to match bits_per_word\n");
+ dev_warn(&spi->dev,
+ "in setup: DMA burst size reduced to match bits_per_word\n");
}
}
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
- status = spi_register_master(master);
+ status = devm_spi_register_master(&pdev->dev, master);
if (status != 0) {
dev_err(&pdev->dev, "problem registering spi master\n");
goto out_error_clock_enabled;
/* Release SSP */
pxa_ssp_free(ssp);
- /* Disconnect from the SPI framework */
- spi_unregister_master(drv_data->master);
-
return 0;
}
hw = spi_master_get_devdata(master);
memset(hw, 0, sizeof(struct s3c24xx_spi));
- hw->master = spi_master_get(master);
+ hw->master = master;
hw->pdata = pdata = dev_get_platdata(&pdev->dev);
hw->dev = &pdev->dev;
return 0;
setup_exit:
+ pm_runtime_put(&sdd->pdev->dev);
/* setup() returns with device de-selected */
disable_cs(sdd, spi);
S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
sdd->regs + S3C64XX_SPI_INT_EN);
+ pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (spi_register_master(master)) {
master->mode_bits = SPI_CPOL | SPI_CPHA;
master->auto_runtime_pm = true;
master->transfer_one_message = hspi_transfer_one_message;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(&pdev->dev, "spi_register_master error.\n");
goto error1;
pm_runtime_disable(&pdev->dev);
clk_put(hspi->clk);
- spi_unregister_master(hspi->master);
return 0;
}
sp->info = dev_get_platdata(&dev->dev);
/* setup spi bitbang adaptor */
- sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master = master;
sp->bitbang.master->bus_num = sp->info->bus_num;
sp->bitbang.master->num_chipselect = sp->info->num_chipselect;
sp->bitbang.chipselect = sh_sci_spi_chipselect;
if (ret)
goto free_master;
- sspi->bitbang.master = spi_master_get(master);
+ sspi->bitbang.master = master;
sspi->bitbang.chipselect = spi_sirfsoc_chipselect;
sspi->bitbang.setup_transfer = spi_sirfsoc_setup_transfer;
sspi->bitbang.txrx_bufs = spi_sirfsoc_transfer;
pm_runtime_put(&pdev->dev);
master->dev.of_node = pdev->dev.of_node;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(&pdev->dev, "can not register to master err %d\n", ret);
goto exit_pm_disable;
struct tegra_spi_data *tspi = spi_master_get_devdata(master);
free_irq(tspi->irq, tspi);
- spi_unregister_master(master);
if (tspi->tx_dma_chan)
tegra_spi_deinit_dma_param(tspi, false);
pm_runtime_put(&pdev->dev);
master->dev.of_node = pdev->dev.of_node;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(&pdev->dev, "can not register to master err %d\n", ret);
goto exit_pm_disable;
struct tegra_sflash_data *tsd = spi_master_get_devdata(master);
free_irq(tsd->irq, tsd);
- spi_unregister_master(master);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
pm_runtime_put(&pdev->dev);
master->dev.of_node = pdev->dev.of_node;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret < 0) {
dev_err(&pdev->dev, "can not register to master err %d\n", ret);
goto exit_pm_disable;
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
free_irq(tspi->irq, tspi);
- spi_unregister_master(master);
if (tspi->tx_dma_chan)
tegra_slink_deinit_dma_param(tspi, false);
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
qspi->spi_max_frequency = max_freq;
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&pdev->dev, master);
if (ret)
goto free_master;
return ret;
}
-static int ti_qspi_remove(struct platform_device *pdev)
-{
- struct ti_qspi *qspi = platform_get_drvdata(pdev);
-
- spi_unregister_master(qspi->master);
-
- return 0;
-}
-
static const struct dev_pm_ops ti_qspi_pm_ops = {
.runtime_resume = ti_qspi_runtime_resume,
};
static struct platform_driver ti_qspi_driver = {
.probe = ti_qspi_probe,
- .remove = ti_qspi_remove,
.driver = {
.name = "ti,dra7xxx-qspi",
.owner = THIS_MODULE,
goto err_out;
}
- dev_dbg(&pspi->dev, "%s Transfer List not empty. "
- "Transfer Speed is set.\n", __func__);
+ dev_dbg(&pspi->dev,
+ "%s Transfer List not empty. Transfer Speed is set.\n", __func__);
spin_lock_irqsave(&data->lock, flags);
/* validate Tx/Rx buffers and Transfer length */
goto err_return_spinlock;
}
- dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length"
- " valid\n", __func__);
+ dev_dbg(&pspi->dev,
+ "%s Tx/Rx buffer valid. Transfer length valid\n",
+ __func__);
/* if baud rate has been specified validate the same */
if (transfer->speed_hz > PCH_MAX_BAUDRATE)
spin_lock(&data->lock);
/* check if suspend has been initiated;if yes flush queue */
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
- dev_dbg(&data->master->dev, "%s suspend/remove initiated,"
- "flushing queue\n", __func__);
+ dev_dbg(&data->master->dev,
+ "%s suspend/remove initiated, flushing queue\n", __func__);
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
pmsg->status = -EIO;
master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&dev->dev, master);
if (ret)
goto exit;
return 0;
struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
struct txx9spi *c = spi_master_get_devdata(master);
- spi_unregister_master(master);
destroy_workqueue(c->workqueue);
clk_disable(c->clk);
clk_put(c->clk);
- spi_master_put(master);
return 0;
}
master->mode_bits = SPI_CPOL | SPI_CPHA;
xspi = spi_master_get_devdata(master);
- xspi->bitbang.master = spi_master_get(master);
+ xspi->bitbang.master = master;
xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
}
+static DEVICE_ATTR_RO(modalias);
-static struct device_attribute spi_dev_attrs[] = {
- __ATTR_RO(modalias),
- __ATTR_NULL,
+static struct attribute *spi_dev_attrs[] = {
+ &dev_attr_modalias.attr,
+ NULL,
};
+ATTRIBUTE_GROUPS(spi_dev);
/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
* and the sysfs version makes coldplug work too.
struct bus_type spi_bus_type = {
.name = "spi",
- .dev_attrs = spi_dev_attrs,
+ .dev_groups = spi_dev_groups,
.match = spi_match_device,
.uevent = spi_uevent,
.pm = &spi_pm,
if (!spi_master_get(master))
return NULL;
- spi = kzalloc(sizeof *spi, GFP_KERNEL);
+ spi = kzalloc(sizeof(*spi), GFP_KERNEL);
if (!spi) {
dev_err(dev, "cannot alloc spi_device\n");
spi_master_put(master);
{
struct spi_device *spi;
struct device_node *nc;
- const __be32 *prop;
- char modalias[SPI_NAME_SIZE + 4];
int rc;
- int len;
+ u32 value;
if (!master->dev.of_node)
return;
}
/* Device address */
- prop = of_get_property(nc, "reg", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_err(&master->dev, "%s has no 'reg' property\n",
- nc->full_name);
+ rc = of_property_read_u32(nc, "reg", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
+ nc->full_name, rc);
spi_dev_put(spi);
continue;
}
- spi->chip_select = be32_to_cpup(prop);
+ spi->chip_select = value;
/* Mode (clock phase/polarity/etc.) */
if (of_find_property(nc, "spi-cpha", NULL))
spi->mode |= SPI_3WIRE;
/* Device DUAL/QUAD mode */
- prop = of_get_property(nc, "spi-tx-bus-width", &len);
- if (prop && len == sizeof(*prop)) {
- switch (be32_to_cpup(prop)) {
- case SPI_NBITS_SINGLE:
+ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
+ switch (value) {
+ case 1:
break;
- case SPI_NBITS_DUAL:
+ case 2:
spi->mode |= SPI_TX_DUAL;
break;
- case SPI_NBITS_QUAD:
+ case 4:
spi->mode |= SPI_TX_QUAD;
break;
default:
dev_err(&master->dev,
"spi-tx-bus-width %d not supported\n",
- be32_to_cpup(prop));
+ value);
spi_dev_put(spi);
continue;
}
}
- prop = of_get_property(nc, "spi-rx-bus-width", &len);
- if (prop && len == sizeof(*prop)) {
- switch (be32_to_cpup(prop)) {
- case SPI_NBITS_SINGLE:
+ if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
+ switch (value) {
+ case 1:
break;
- case SPI_NBITS_DUAL:
+ case 2:
spi->mode |= SPI_RX_DUAL;
break;
- case SPI_NBITS_QUAD:
+ case 4:
spi->mode |= SPI_RX_QUAD;
break;
default:
dev_err(&master->dev,
"spi-rx-bus-width %d not supported\n",
- be32_to_cpup(prop));
+ value);
spi_dev_put(spi);
continue;
}
}
/* Device speed */
- prop = of_get_property(nc, "spi-max-frequency", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n",
- nc->full_name);
+ rc = of_property_read_u32(nc, "spi-max-frequency", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
+ nc->full_name, rc);
spi_dev_put(spi);
continue;
}
- spi->max_speed_hz = be32_to_cpup(prop);
+ spi->max_speed_hz = value;
/* IRQ */
spi->irq = irq_of_parse_and_map(nc, 0);
spi->dev.of_node = nc;
/* Register the new device */
- snprintf(modalias, sizeof(modalias), "%s%s", SPI_MODULE_PREFIX,
- spi->modalias);
- request_module(modalias);
+ request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
rc = spi_add_device(spi);
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
return AE_OK;
}
- strlcpy(spi->modalias, dev_name(&adev->dev), sizeof(spi->modalias));
+ strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
if (spi_add_device(spi)) {
dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
dev_name(&adev->dev));
if (!dev)
return NULL;
- master = kzalloc(size + sizeof *master, GFP_KERNEL);
+ master = kzalloc(size + sizeof(*master), GFP_KERNEL);
if (!master)
return NULL;
return 0;
nb = of_gpio_named_count(np, "cs-gpios");
- master->num_chipselect = max(nb, (int)master->num_chipselect);
+ master->num_chipselect = max_t(int, nb, master->num_chipselect);
/* Return error only for an incorrectly formed cs-gpios property */
if (nb == 0 || nb == -ENOENT)
}
EXPORT_SYMBOL_GPL(spi_register_master);
+static void devm_spi_unregister(struct device *dev, void *res)
+{
+ spi_unregister_master(*(struct spi_master **)res);
+}
+
+/**
+ * dev_spi_register_master - register managed SPI master controller
+ * @dev: device managing SPI master
+ * @master: initialized master, originally from spi_alloc_master()
+ * Context: can sleep
+ *
+ * Register a SPI device as with spi_register_master() which will
+ * automatically be unregister
+ */
+int devm_spi_register_master(struct device *dev, struct spi_master *master)
+{
+ struct spi_master **ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = spi_register_master(master);
+ if (ret != 0) {
+ *ptr = master;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_spi_register_master);
+
static int __unregister(struct device *dev, void *null)
{
spi_unregister_device(to_spi_device(dev));
if (spi->master->setup)
status = spi->master->setup(spi);
- dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"
- "%u bits/w, %u Hz max --> %d\n",
+ dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
(spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
EXPORT_SYMBOL_GPL(spi_bus_unlock);
/* portable code must never pass more than 32 bytes */
-#define SPI_BUFSIZ max(32,SMP_CACHE_BYTES)
+#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
static u8 *buf;
}
spi_message_init(&message);
- memset(x, 0, sizeof x);
+ memset(x, 0, sizeof(x));
if (n_tx) {
x[0].len = n_tx;
spi_message_add_tail(&x[0], &message);
#include <linux/spi/spi.h>
#include <linux/spi/spidev.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
/*
mutex_lock(&spidev->buf_lock);
missing = copy_from_user(spidev->buffer, buf, count);
- if (missing == 0) {
+ if (missing == 0)
status = spidev_sync_write(spidev, count);
- } else
+ else
status = -EFAULT;
mutex_unlock(&spidev->buf_lock);
/* make sure ops on existing fds can abort cleanly */
spin_lock_irq(&spidev->spi_lock);
spidev->spi = NULL;
- spi_set_drvdata(spi, NULL);
spin_unlock_irq(&spidev->spi_lock);
/* prevent new opens */
sport->devdata = of_id->data;
- if (of_device_is_stdout_path(np))
- add_preferred_console(imx_reg.cons->name, sport->port.line, 0);
-
return 0;
}
#else
if (!mmres || !irqres)
return -ENODEV;
- if (np)
+ if (np) {
port = of_alias_get_id(np, "serial");
if (port >= VT8500_MAX_PORTS)
port = -1;
- else
+ } else {
port = -1;
+ }
if (port < 0) {
/* calculate the port id */
{
struct usb_hcd *hcd = ci->hcd;
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
+ if (hcd) {
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+ }
if (ci->platdata->reg_vbus)
regulator_disable(ci->platdata->reg_vbus);
}
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* MicroTouch Systems touchscreen */
+ { USB_DEVICE(0x0596, 0x051e), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
/* Broadcom BCM92035DGROM BT dongle */
{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* MAYA44USB sound device */
+ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
* switchable ports.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
- cpu_to_le32(ports_available));
+ ports_available);
pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
&ports_available);
* host.
*/
pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
- cpu_to_le32(ports_available));
+ ports_available);
pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
&ports_available);
t1 = xhci_port_state_to_neutral(t1);
if (t1 != t2)
xhci_writel(xhci, t2, port_array[port_index]);
-
- if (hcd->speed != HCD_USB3) {
- /* enable remote wake up for USB 2.0 */
- __le32 __iomem *addr;
- u32 tmp;
-
- /* Get the port power control register address. */
- addr = port_array[port_index] + PORTPMSC;
- tmp = xhci_readl(xhci, addr);
- tmp |= PORT_RWE;
- xhci_writel(xhci, tmp, addr);
- }
}
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
xhci_ring_device(xhci, slot_id);
} else
xhci_writel(xhci, temp, port_array[port_index]);
-
- if (hcd->speed != HCD_USB3) {
- /* disable remote wake up for USB 2.0 */
- __le32 __iomem *addr;
- u32 tmp;
-
- /* Add one to the port status register address to get
- * the port power control register address.
- */
- addr = port_array[port_index] + PORTPMSC;
- tmp = xhci_readl(xhci, addr);
- tmp &= ~PORT_RWE;
- xhci_writel(xhci, tmp, addr);
- }
}
(void) xhci_readl(xhci, &xhci->op_regs->command);
#define PCI_VENDOR_ID_ETRON 0x1b6f
#define PCI_DEVICE_ID_ASROCK_P67 0x7023
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
+
static const char hcd_name[] = "xhci_hcd";
/* called after powerup, by probe or system-pm "wakeup" */
"QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint");
}
+ if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
+ pdev->revision == 0x4) {
+ xhci->quirks |= XHCI_SLOW_SUSPEND;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+ "QUIRK: Fresco Logic xHC revision %u"
+ "must be suspended extra slowly",
+ pdev->revision);
+ }
/* Fresco Logic confirms: all revisions of this chip do not
* support MSI, even though some of them claim to in their PCI
* capabilities.
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
xhci->quirks |= XHCI_AVOID_BEI;
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
+ /* Workaround for occasional spurious wakeups from S5 (or
+ * any other sleep) on Haswell machines with LPT and LPT-LP
+ * with the new Intel BIOS
+ */
+ xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+ }
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
usb_put_hcd(xhci->shared_hcd);
}
usb_hcd_pci_remove(dev);
+
+ /* Workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ pci_set_power_state(dev, PCI_D3hot);
+
kfree(xhci);
}
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
+ /* Workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ xhci_reset(xhci);
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_shutdown completed - status = %x",
xhci_readl(xhci, &xhci->op_regs->status));
+
+ /* Yet another workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ pci_set_power_state(to_pci_dev(hcd->self.controller), PCI_D3hot);
}
#ifdef CONFIG_PM
int xhci_suspend(struct xhci_hcd *xhci)
{
int rc = 0;
+ unsigned int delay = XHCI_MAX_HALT_USEC;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
u32 command;
command = xhci_readl(xhci, &xhci->op_regs->command);
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
+
+ /* Some chips from Fresco Logic need an extraordinary delay */
+ delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
+
if (xhci_handshake(xhci, &xhci->op_regs->status,
- STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
+ STS_HALT, STS_HALT, delay)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
#define XHCI_COMP_MODE_QUIRK (1 << 14)
#define XHCI_AVOID_BEI (1 << 15)
#define XHCI_PLAT (1 << 16)
+#define XHCI_SLOW_SUSPEND (1 << 17)
+#define XHCI_SPURIOUS_WAKEUP (1 << 18)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
config USB_HSIC_USB3503
tristate "USB3503 HSIC to USB20 Driver"
depends on I2C
- select REGMAP
+ select REGMAP_I2C
help
This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
}
+/*
+ * Program the HDRC to start (enable interrupts, dma, etc.).
+ */
+void musb_start(struct musb *musb)
+{
+ void __iomem *regs = musb->mregs;
+ u8 devctl = musb_readb(regs, MUSB_DEVCTL);
+
+ dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+ /* Set INT enable registers, enable interrupts */
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+ musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ /* session started after:
+ * (a) ID-grounded irq, host mode;
+ * (b) vbus present/connect IRQ, peripheral mode;
+ * (c) peripheral initiates, using SRP
+ */
+ if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+ musb->is_active = 1;
+ } else {
+ devctl |= MUSB_DEVCTL_SESSION;
+ }
+
+ musb_platform_enable(musb);
+ musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
/*
* Make the HDRC stop (disable interrupts, etc.);
* reversible by musb_start
extern const char musb_driver_name[];
extern void musb_stop(struct musb *musb);
+extern void musb_start(struct musb *musb);
extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
musb->gadget_driver = driver;
spin_lock_irqsave(&musb->lock, flags);
+ musb->is_active = 1;
otg_set_peripheral(otg, &musb->g);
musb->xceiv->state = OTG_STATE_B_IDLE;
spin_unlock_irqrestore(&musb->lock, flags);
+ musb_start(musb);
+
/* REVISIT: funcall to other code, which also
* handles power budgeting ... this way also
* ensures HdrcStart is indirectly called.
#include "musb_core.h"
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-static void musb_start(struct musb *musb)
-{
- void __iomem *regs = musb->mregs;
- u8 devctl = musb_readb(regs, MUSB_DEVCTL);
-
- dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
- devctl &= ~MUSB_DEVCTL_SESSION;
-
- /* session started after:
- * (a) ID-grounded irq, host mode;
- * (b) vbus present/connect IRQ, peripheral mode;
- * (c) peripheral initiates, using SRP
- */
- if (musb->port_mode != MUSB_PORT_MODE_HOST &&
- (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
- musb->is_active = 1;
- } else {
- devctl |= MUSB_DEVCTL_SESSION;
- }
-
- musb_platform_enable(musb);
- musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
static void musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;
#define CHANGHONG_VENDOR_ID 0x2077
#define CHANGHONG_PRODUCT_CH690 0x7001
+/* Inovia */
+#define INOVIA_VENDOR_ID 0x20a6
+#define INOVIA_SEW858 0x1105
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x02) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x03) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x04) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x06) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x10) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x12) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x13) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x14) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x15) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x17) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x18) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x19) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x31) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x32) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x33) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x34) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x35) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x36) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x48) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x49) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x61) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x62) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x63) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x64) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x65) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x66) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x02) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x03) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x04) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x06) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x10) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x12) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x13) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x14) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x15) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x17) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x18) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x19) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x31) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x32) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x33) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x34) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x35) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x36) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x48) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x49) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x61) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x62) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x63) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x64) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x65) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x66) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x02) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x03) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x04) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x06) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x10) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x12) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x13) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x14) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x15) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x17) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x18) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x19) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x31) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x32) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x33) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x34) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x35) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x36) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x48) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x49) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x61) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x62) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x63) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x64) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x65) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x66) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x01) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x02) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x03) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x04) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x05) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x06) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x10) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x12) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x13) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x14) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x15) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x17) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x18) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x19) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x31) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x32) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x33) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x34) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x35) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x36) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x48) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x49) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4C) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x61) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x62) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x63) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x64) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x65) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x66) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) },
+ { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
- { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist
+ },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
+ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
{ } /* terminator */
};
/*
* Many devices do not respond properly to READ_CAPACITY_16.
* Tell the SCSI layer to try READ_CAPACITY_10 first.
+ * However some USB 3.0 drive enclosures return capacity
+ * modulo 2TB. Those must use READ_CAPACITY_16
*/
- sdev->try_rc_10_first = 1;
+ if (!(us->fflags & US_FL_NEEDS_CAP16))
+ sdev->try_rc_10_first = 1;
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Oliver Neukum <oneukum@suse.com> */
+UNUSUAL_DEV( 0x174c, 0x55aa, 0x0100, 0x0100,
+ "ASMedia",
+ "AS2105",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NEEDS_CAP16),
+
/* Reported by Jesse Feddema <jdfeddema@gmail.com> */
UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000,
"Yarvik",
long npage;
int ret = 0, prot = 0;
uint64_t mask;
+ struct vfio_dma *dma = NULL;
+ unsigned long pfn;
end = map->iova + map->size;
}
for (iova = map->iova; iova < end; iova += size, vaddr += size) {
- struct vfio_dma *dma = NULL;
- unsigned long pfn;
long i;
/* Pin a contiguous chunk of memory */
if (npage <= 0) {
WARN_ON(!npage);
ret = (int)npage;
- break;
+ goto out;
}
/* Verify pages are not already mapped */
for (i = 0; i < npage; i++) {
if (iommu_iova_to_phys(iommu->domain,
iova + (i << PAGE_SHIFT))) {
- vfio_unpin_pages(pfn, npage, prot, true);
ret = -EBUSY;
- break;
+ goto out_unpin;
}
}
if (ret) {
if (ret != -EBUSY ||
map_try_harder(iommu, iova, pfn, npage, prot)) {
- vfio_unpin_pages(pfn, npage, prot, true);
- break;
+ goto out_unpin;
}
}
dma = kzalloc(sizeof(*dma), GFP_KERNEL);
if (!dma) {
iommu_unmap(iommu->domain, iova, size);
- vfio_unpin_pages(pfn, npage, prot, true);
ret = -ENOMEM;
- break;
+ goto out_unpin;
}
dma->size = size;
}
}
- if (ret) {
- struct vfio_dma *tmp;
- iova = map->iova;
- size = map->size;
- while ((tmp = vfio_find_dma(iommu, iova, size))) {
- int r = vfio_remove_dma_overlap(iommu, iova,
- &size, tmp);
- if (WARN_ON(r || !size))
- break;
- }
+ WARN_ON(ret);
+ mutex_unlock(&iommu->lock);
+ return ret;
+
+out_unpin:
+ vfio_unpin_pages(pfn, npage, prot, true);
+
+out:
+ iova = map->iova;
+ size = map->size;
+ while ((dma = vfio_find_dma(iommu, iova, size))) {
+ int r = vfio_remove_dma_overlap(iommu, iova,
+ &size, dma);
+ if (WARN_ON(r || !size))
+ break;
}
mutex_unlock(&iommu->lock);
sl = dev_to_w1_slave(dev);
fops = sl->family->fops;
+ if (!fops)
+ return 0;
+
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
/* if the family driver needs to initialize something... */
atomic_set(&sl->refcnt, 0);
init_completion(&sl->released);
+ /* slave modules need to be loaded in a context with unlocked mutex */
+ mutex_unlock(&dev->mutex);
request_module("w1-family-0x%0x", rn->family);
+ mutex_lock(&dev->mutex);
spin_lock(&w1_flock);
f = w1_family_registered(rn->family);
if (btrfs_extent_readonly(root, disk_bytenr))
goto out;
+ btrfs_release_path(path);
/*
* look for other files referencing this extent, if we
struct buffer_head *bh;
sector_t end_block;
int ret = 0; /* Will call free_more_memory() */
+ gfp_t gfp_mask;
- page = find_or_create_page(inode->i_mapping, index,
- (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE);
+ gfp_mask = mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS;
+ gfp_mask |= __GFP_MOVABLE;
+ /*
+ * XXX: __getblk_slow() can not really deal with failure and
+ * will endlessly loop on improvised global reclaim. Prefer
+ * looping in the allocator rather than here, at least that
+ * code knows what it's doing.
+ */
+ gfp_mask |= __GFP_NOFAIL;
+
+ page = find_or_create_page(inode->i_mapping, index, gfp_mask);
if (!page)
return ret;
{
struct inode *inode;
struct cifs_sb_info *cifs_sb;
+ struct cifs_tcon *tcon;
int rc = 0;
cifs_sb = CIFS_SB(sb);
+ tcon = cifs_sb_master_tcon(cifs_sb);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIXACL)
sb->s_flags |= MS_POSIXACL;
- if (cifs_sb_master_tcon(cifs_sb)->ses->capabilities & CAP_LARGE_FILES)
+ if (tcon->ses->capabilities & tcon->ses->server->vals->cap_large_files)
sb->s_maxbytes = MAX_LFS_FILESIZE;
else
sb->s_maxbytes = MAX_NON_LFS;
goto out_no_root;
}
- if (cifs_sb_master_tcon(cifs_sb)->nocase)
+ if (tcon->nocase)
sb->s_d_op = &cifs_ci_dentry_ops;
else
sb->s_d_op = &cifs_dentry_ops;
__u8 FileName[0];
} __attribute__((packed));
-struct reparse_data {
- __u32 ReparseTag;
- __u16 ReparseDataLength;
+/* For IO_REPARSE_TAG_SYMLINK */
+struct reparse_symlink_data {
+ __le32 ReparseTag;
+ __le16 ReparseDataLength;
__u16 Reserved;
- __u16 SubstituteNameOffset;
- __u16 SubstituteNameLength;
- __u16 PrintNameOffset;
- __u16 PrintNameLength;
- __u32 Flags;
+ __le16 SubstituteNameOffset;
+ __le16 SubstituteNameLength;
+ __le16 PrintNameOffset;
+ __le16 PrintNameLength;
+ __le32 Flags;
+ char PathBuffer[0];
+} __attribute__((packed));
+
+/* For IO_REPARSE_TAG_NFS */
+#define NFS_SPECFILE_LNK 0x00000000014B4E4C
+#define NFS_SPECFILE_CHR 0x0000000000524843
+#define NFS_SPECFILE_BLK 0x00000000004B4C42
+#define NFS_SPECFILE_FIFO 0x000000004F464946
+#define NFS_SPECFILE_SOCK 0x000000004B434F53
+struct reparse_posix_data {
+ __le32 ReparseTag;
+ __le16 ReparseDataLength;
+ __u16 Reserved;
+ __le64 InodeType; /* LNK, FIFO, CHR etc. */
char PathBuffer[0];
} __attribute__((packed));
bool is_unicode;
unsigned int sub_len;
char *sub_start;
- struct reparse_data *reparse_buf;
+ struct reparse_symlink_data *reparse_buf;
+ struct reparse_posix_data *posix_buf;
__u32 data_offset, data_count;
char *end_of_smb;
goto qreparse_out;
}
end_of_smb = 2 + get_bcc(&pSMBr->hdr) + (char *)&pSMBr->ByteCount;
- reparse_buf = (struct reparse_data *)
+ reparse_buf = (struct reparse_symlink_data *)
((char *)&pSMBr->hdr.Protocol + data_offset);
if ((char *)reparse_buf >= end_of_smb) {
rc = -EIO;
goto qreparse_out;
}
- if ((reparse_buf->PathBuffer + reparse_buf->PrintNameOffset +
- reparse_buf->PrintNameLength) > end_of_smb) {
+ if (reparse_buf->ReparseTag == cpu_to_le32(IO_REPARSE_TAG_NFS)) {
+ cifs_dbg(FYI, "NFS style reparse tag\n");
+ posix_buf = (struct reparse_posix_data *)reparse_buf;
+
+ if (posix_buf->InodeType != cpu_to_le64(NFS_SPECFILE_LNK)) {
+ cifs_dbg(FYI, "unsupported file type 0x%llx\n",
+ le64_to_cpu(posix_buf->InodeType));
+ rc = -EOPNOTSUPP;
+ goto qreparse_out;
+ }
+ is_unicode = true;
+ sub_len = le16_to_cpu(reparse_buf->ReparseDataLength);
+ if (posix_buf->PathBuffer + sub_len > end_of_smb) {
+ cifs_dbg(FYI, "reparse buf beyond SMB\n");
+ rc = -EIO;
+ goto qreparse_out;
+ }
+ *symlinkinfo = cifs_strndup_from_utf16(posix_buf->PathBuffer,
+ sub_len, is_unicode, nls_codepage);
+ goto qreparse_out;
+ } else if (reparse_buf->ReparseTag !=
+ cpu_to_le32(IO_REPARSE_TAG_SYMLINK)) {
+ rc = -EOPNOTSUPP;
+ goto qreparse_out;
+ }
+
+ /* Reparse tag is NTFS symlink */
+ sub_start = le16_to_cpu(reparse_buf->SubstituteNameOffset) +
+ reparse_buf->PathBuffer;
+ sub_len = le16_to_cpu(reparse_buf->SubstituteNameLength);
+ if (sub_start + sub_len > end_of_smb) {
cifs_dbg(FYI, "reparse buf beyond SMB\n");
rc = -EIO;
goto qreparse_out;
}
- sub_start = reparse_buf->SubstituteNameOffset + reparse_buf->PathBuffer;
- sub_len = reparse_buf->SubstituteNameLength;
if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
is_unicode = true;
else
ERRDOS, ERRnoaccess, 0xc0000290}, {
ERRDOS, ERRbadfunc, 0xc000029c}, {
ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
- ERRDOS, ERRinvlevel, 0x007c0001}, };
+ ERRDOS, ERRinvlevel, 0x007c0001}, {
+ 0, 0, 0 }
+};
/*****************************************************************************
Print an error message from the status code
return NTLMv2;
if (global_secflags & CIFSSEC_MAY_NTLM)
return NTLM;
- /* Fallthrough */
default:
- return Unspecified;
+ /* Fallthrough to attempt LANMAN authentication next */
+ break;
}
case CIFS_NEGFLAVOR_LANMAN:
switch (requested) {
else
return -EIO;
+ /* no need to send SMB logoff if uid already closed due to reconnect */
+ if (ses->need_reconnect)
+ goto smb2_session_already_dead;
+
rc = small_smb2_init(SMB2_LOGOFF, NULL, (void **) &req);
if (rc)
return rc;
* No tcon so can't do
* cifs_stats_inc(&tcon->stats.smb2_stats.smb2_com_fail[SMB2...]);
*/
+
+smb2_session_already_dead:
return rc;
}
#define FSCTL_QUERY_NETWORK_INTERFACE_INFO 0x001401FC /* BB add struct */
#define FSCTL_SRV_READ_HASH 0x001441BB /* BB add struct */
+/* See FSCC 2.1.2.5 */
#define IO_REPARSE_TAG_MOUNT_POINT 0xA0000003
#define IO_REPARSE_TAG_HSM 0xC0000004
#define IO_REPARSE_TAG_SIS 0x80000007
+#define IO_REPARSE_TAG_HSM2 0x80000006
+#define IO_REPARSE_TAG_DRIVER_EXTENDER 0x80000005
+/* Used by the DFS filter. See MS-DFSC */
+#define IO_REPARSE_TAG_DFS 0x8000000A
+/* Used by the DFS filter See MS-DFSC */
+#define IO_REPARSE_TAG_DFSR 0x80000012
+#define IO_REPARSE_TAG_FILTER_MANAGER 0x8000000B
+/* See section MS-FSCC 2.1.2.4 */
+#define IO_REPARSE_TAG_SYMLINK 0xA000000C
+#define IO_REPARSE_TAG_DEDUP 0x80000013
+#define IO_REPARSE_APPXSTREAM 0xC0000014
+/* NFS symlinks, Win 8/SMB3 and later */
+#define IO_REPARSE_TAG_NFS 0x80000014
/* fsctl flags */
/* If Flags is set to this value, the request is an FSCTL not ioctl request */
wait_for_free_request(struct TCP_Server_Info *server, const int timeout,
const int optype)
{
- return wait_for_free_credits(server, timeout,
- server->ops->get_credits_field(server, optype));
+ int *val;
+
+ val = server->ops->get_credits_field(server, optype);
+ /* Since an echo is already inflight, no need to wait to send another */
+ if (*val <= 0 && optype == CIFS_ECHO_OP)
+ return -EAGAIN;
+ return wait_for_free_credits(server, timeout, val);
}
static int allocate_mid(struct cifs_ses *ses, struct smb_hdr *in_buf,
d_tmpfile(dentry, inode);
err = ext3_orphan_add(handle, inode);
if (err)
- goto err_drop_inode;
+ goto err_unlock_inode;
mark_inode_dirty(inode);
unlock_new_inode(inode);
}
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
-err_drop_inode:
+err_unlock_inode:
ext3_journal_stop(handle);
unlock_new_inode(inode);
- iput(inode);
return err;
}
d_tmpfile(dentry, inode);
err = ext4_orphan_add(handle, inode);
if (err)
- goto err_drop_inode;
+ goto err_unlock_inode;
mark_inode_dirty(inode);
unlock_new_inode(inode);
}
if (err == -ENOSPC && ext4_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
-err_drop_inode:
+err_unlock_inode:
ext4_journal_stop(handle);
unlock_new_inode(inode);
- iput(inode);
return err;
}
static unsigned long proc_reg_get_unmapped_area(struct file *file, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags)
{
struct proc_dir_entry *pde = PDE(file_inode(file));
- int rv = -EIO;
- unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+ unsigned long rv = -EIO;
+ unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long) = NULL;
if (use_pde(pde)) {
- get_unmapped_area = pde->proc_fops->get_unmapped_area;
+#ifdef CONFIG_MMU
+ get_unmapped_area = current->mm->get_unmapped_area;
+#endif
+ if (pde->proc_fops->get_unmapped_area)
+ get_unmapped_area = pde->proc_fops->get_unmapped_area;
if (get_unmapped_area)
rv = get_unmapped_area(file, orig_addr, len, pgoff, flags);
unuse_pde(pde);
frame = pte_pfn(pte);
flags = PM_PRESENT;
page = vm_normal_page(vma, addr, pte);
+ if (pte_soft_dirty(pte))
+ flags2 |= __PM_SOFT_DIRTY;
} else if (is_swap_pte(pte)) {
swp_entry_t entry;
if (pte_swp_soft_dirty(pte))
if (page && !PageAnon(page))
flags |= PM_FILE;
- if ((vma->vm_flags & VM_SOFTDIRTY) || pte_soft_dirty(pte))
+ if ((vma->vm_flags & VM_SOFTDIRTY))
flags2 |= __PM_SOFT_DIRTY;
*pme = make_pme(PM_PFRAME(frame) | PM_STATUS2(pm->v2, flags2) | flags);
unsigned int physical_node_count;
struct list_head physical_node_list;
struct mutex physical_node_lock;
- struct list_head power_dependent;
void (*remove)(struct acpi_device *);
};
acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
acpi_notify_handler handler);
int acpi_pm_device_sleep_state(struct device *, int *, int);
-void acpi_dev_pm_add_dependent(acpi_handle handle, struct device *depdev);
-void acpi_dev_pm_remove_dependent(acpi_handle handle, struct device *depdev);
#else
static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
acpi_notify_handler handler,
return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3_COLD) ?
m : ACPI_STATE_D0;
}
-static inline void acpi_dev_pm_add_dependent(acpi_handle handle,
- struct device *depdev) {}
-static inline void acpi_dev_pm_remove_dependent(acpi_handle handle,
- struct device *depdev) {}
#endif
#ifdef CONFIG_PM_RUNTIME
extern void mem_cgroup_replace_page_cache(struct page *oldpage,
struct page *newpage);
-/**
- * mem_cgroup_toggle_oom - toggle the memcg OOM killer for the current task
- * @new: true to enable, false to disable
- *
- * Toggle whether a failed memcg charge should invoke the OOM killer
- * or just return -ENOMEM. Returns the previous toggle state.
- *
- * NOTE: Any path that enables the OOM killer before charging must
- * call mem_cgroup_oom_synchronize() afterward to finalize the
- * OOM handling and clean up.
- */
-static inline bool mem_cgroup_toggle_oom(bool new)
+static inline void mem_cgroup_oom_enable(void)
{
- bool old;
-
- old = current->memcg_oom.may_oom;
- current->memcg_oom.may_oom = new;
-
- return old;
+ WARN_ON(current->memcg_oom.may_oom);
+ current->memcg_oom.may_oom = 1;
}
-static inline void mem_cgroup_enable_oom(void)
+static inline void mem_cgroup_oom_disable(void)
{
- bool old = mem_cgroup_toggle_oom(true);
-
- WARN_ON(old == true);
-}
-
-static inline void mem_cgroup_disable_oom(void)
-{
- bool old = mem_cgroup_toggle_oom(false);
-
- WARN_ON(old == false);
+ WARN_ON(!current->memcg_oom.may_oom);
+ current->memcg_oom.may_oom = 0;
}
static inline bool task_in_memcg_oom(struct task_struct *p)
{
- return p->memcg_oom.in_memcg_oom;
+ return p->memcg_oom.memcg;
}
-bool mem_cgroup_oom_synchronize(void);
+bool mem_cgroup_oom_synchronize(bool wait);
#ifdef CONFIG_MEMCG_SWAP
extern int do_swap_account;
{
}
-static inline bool mem_cgroup_toggle_oom(bool new)
-{
- return false;
-}
-
-static inline void mem_cgroup_enable_oom(void)
+static inline void mem_cgroup_oom_enable(void)
{
}
-static inline void mem_cgroup_disable_oom(void)
+static inline void mem_cgroup_oom_disable(void)
{
}
return false;
}
-static inline bool mem_cgroup_oom_synchronize(void)
+static inline bool mem_cgroup_oom_synchronize(bool wait)
{
return false;
}
MLX5_DEV_CAP_FLAG_TLP_HINTS = 1LL << 39,
MLX5_DEV_CAP_FLAG_SIG_HAND_OVER = 1LL << 40,
MLX5_DEV_CAP_FLAG_DCT = 1LL << 41,
- MLX5_DEV_CAP_FLAG_CMDIF_CSUM = 1LL << 46,
+ MLX5_DEV_CAP_FLAG_CMDIF_CSUM = 3LL << 46,
};
enum {
struct health_buffer health;
__be32 rsvd2[884];
__be32 health_counter;
- __be32 rsvd3[1023];
+ __be32 rsvd3[1019];
__be64 ieee1588_clk;
__be32 ieee1588_clk_type;
__be32 clr_intx;
};
enum {
- MLX5_MAX_EQ_NAME = 20
+ MLX5_MAX_EQ_NAME = 32
};
enum {
enum {
MLX5_PROF_MASK_QP_SIZE = (u64)1 << 0,
- MLX5_PROF_MASK_CMDIF_CSUM = (u64)1 << 1,
- MLX5_PROF_MASK_MR_CACHE = (u64)1 << 2,
+ MLX5_PROF_MASK_MR_CACHE = (u64)1 << 1,
};
enum {
struct mlx5_profile {
u64 mask;
u32 log_max_qp;
- int cmdif_csum;
struct {
int size;
int limit;
+++ /dev/null
-#ifndef __OF_RESERVED_MEM_H
-#define __OF_RESERVED_MEM_H
-
-#ifdef CONFIG_OF_RESERVED_MEM
-void of_reserved_mem_device_init(struct device *dev);
-void of_reserved_mem_device_release(struct device *dev);
-void early_init_dt_scan_reserved_mem(void);
-#else
-static inline void of_reserved_mem_device_init(struct device *dev) { }
-static inline void of_reserved_mem_device_release(struct device *dev) { }
-static inline void early_init_dt_scan_reserved_mem(void) { }
-#endif
-
-#endif /* __OF_RESERVED_MEM_H */
} memcg_batch;
unsigned int memcg_kmem_skip_account;
struct memcg_oom_info {
+ struct mem_cgroup *memcg;
+ gfp_t gfp_mask;
+ int order;
unsigned int may_oom:1;
- unsigned int in_memcg_oom:1;
- unsigned int oom_locked:1;
- int wakeups;
- struct mem_cgroup *wait_on_memcg;
} memcg_oom;
#endif
#ifdef CONFIG_UPROBES
spi_alloc_master(struct device *host, unsigned size);
extern int spi_register_master(struct spi_master *master);
+extern int devm_spi_register_master(struct device *dev,
+ struct spi_master *master);
extern void spi_unregister_master(struct spi_master *master);
extern struct spi_master *spi_busnum_to_master(u16 busnum);
unsigned int needs_reset:1;
};
-#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
+#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
US_FLAG(INITIAL_READ10, 0x00100000) \
/* Initial READ(10) (and others) must be retried */ \
US_FLAG(WRITE_CACHE, 0x00200000) \
- /* Write Cache status is not available */
+ /* Write Cache status is not available */ \
+ US_FLAG(NEEDS_CAP16, 0x00400000)
+ /* cannot handle READ_CAPACITY_10 */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
sem_lock(sma, NULL, -1);
+ if (sma->sem_perm.deleted) {
+ sem_unlock(sma, -1);
+ rcu_read_unlock();
+ return -EIDRM;
+ }
+
curr = &sma->sem_base[semnum];
ipc_assert_locked_object(&sma->sem_perm);
int i;
sem_lock(sma, NULL, -1);
+ if (sma->sem_perm.deleted) {
+ err = -EIDRM;
+ goto out_unlock;
+ }
if(nsems > SEMMSL_FAST) {
if (!ipc_rcu_getref(sma)) {
- sem_unlock(sma, -1);
- rcu_read_unlock();
err = -EIDRM;
- goto out_free;
+ goto out_unlock;
}
sem_unlock(sma, -1);
rcu_read_unlock();
rcu_read_lock();
sem_lock_and_putref(sma);
if (sma->sem_perm.deleted) {
- sem_unlock(sma, -1);
- rcu_read_unlock();
err = -EIDRM;
- goto out_free;
+ goto out_unlock;
}
}
for (i = 0; i < sma->sem_nsems; i++)
struct sem_undo *un;
if (!ipc_rcu_getref(sma)) {
- rcu_read_unlock();
- return -EIDRM;
+ err = -EIDRM;
+ goto out_rcu_wakeup;
}
rcu_read_unlock();
rcu_read_lock();
sem_lock_and_putref(sma);
if (sma->sem_perm.deleted) {
- sem_unlock(sma, -1);
- rcu_read_unlock();
err = -EIDRM;
- goto out_free;
+ goto out_unlock;
}
for (i = 0; i < nsems; i++)
goto out_rcu_wakeup;
sem_lock(sma, NULL, -1);
+ if (sma->sem_perm.deleted) {
+ err = -EIDRM;
+ goto out_unlock;
+ }
curr = &sma->sem_base[semnum];
switch (cmd) {
if (error)
goto out_rcu_wakeup;
+ error = -EIDRM;
+ locknum = sem_lock(sma, sops, nsops);
+ if (sma->sem_perm.deleted)
+ goto out_unlock_free;
/*
* semid identifiers are not unique - find_alloc_undo may have
* allocated an undo structure, it was invalidated by an RMID
* This case can be detected checking un->semid. The existence of
* "un" itself is guaranteed by rcu.
*/
- error = -EIDRM;
- locknum = sem_lock(sma, sops, nsops);
if (un && un->semid == -1)
goto out_unlock_free;
}
sem_lock(sma, NULL, -1);
+ /* exit_sem raced with IPC_RMID, nothing to do */
+ if (sma->sem_perm.deleted) {
+ sem_unlock(sma, -1);
+ rcu_read_unlock();
+ continue;
+ }
un = __lookup_undo(ulp, semid);
if (un == NULL) {
/* exit_sem raced with IPC_RMID+semget() that created
* Pavel Emelianov <xemul@openvz.org>
*
* General sysv ipc locking scheme:
- * when doing ipc id lookups, take the ids->rwsem
- * rcu_read_lock()
- * obtain the ipc object (kern_ipc_perm)
- * perform security, capabilities, auditing and permission checks, etc.
- * acquire the ipc lock (kern_ipc_perm.lock) throught ipc_lock_object()
- * perform data updates (ie: SET, RMID, LOCK/UNLOCK commands)
+ * rcu_read_lock()
+ * obtain the ipc object (kern_ipc_perm) by looking up the id in an idr
+ * tree.
+ * - perform initial checks (capabilities, auditing and permission,
+ * etc).
+ * - perform read-only operations, such as STAT, INFO commands.
+ * acquire the ipc lock (kern_ipc_perm.lock) through
+ * ipc_lock_object()
+ * - perform data updates, such as SET, RMID commands and
+ * mechanism-specific operations (semop/semtimedop,
+ * msgsnd/msgrcv, shmat/shmdt).
+ * drop the ipc lock, through ipc_unlock_object().
+ * rcu_read_unlock()
+ *
+ * The ids->rwsem must be taken when:
+ * - creating, removing and iterating the existing entries in ipc
+ * identifier sets.
+ * - iterating through files under /proc/sysvipc/
+ *
+ * Note that sems have a special fast path that avoids kern_ipc_perm.lock -
+ * see sem_lock().
*/
#include <linux/mm.h>
ref->release = release;
return 0;
}
+EXPORT_SYMBOL_GPL(percpu_ref_init);
/**
* percpu_ref_cancel_init - cancel percpu_ref_init()
free_percpu(ref->pcpu_count);
}
}
+EXPORT_SYMBOL_GPL(percpu_ref_cancel_init);
static void percpu_ref_kill_rcu(struct rcu_head *rcu)
{
call_rcu_sched(&ref->rcu, percpu_ref_kill_rcu);
}
+EXPORT_SYMBOL_GPL(percpu_ref_kill_and_confirm);
struct inode *inode = mapping->host;
pgoff_t offset = vmf->pgoff;
struct page *page;
- bool memcg_oom;
pgoff_t size;
int ret = 0;
return VM_FAULT_SIGBUS;
/*
- * Do we have something in the page cache already? Either
- * way, try readahead, but disable the memcg OOM killer for it
- * as readahead is optional and no errors are propagated up
- * the fault stack. The OOM killer is enabled while trying to
- * instantiate the faulting page individually below.
+ * Do we have something in the page cache already?
*/
page = find_get_page(mapping, offset);
if (likely(page) && !(vmf->flags & FAULT_FLAG_TRIED)) {
* We found the page, so try async readahead before
* waiting for the lock.
*/
- memcg_oom = mem_cgroup_toggle_oom(false);
do_async_mmap_readahead(vma, ra, file, page, offset);
- mem_cgroup_toggle_oom(memcg_oom);
} else if (!page) {
/* No page in the page cache at all */
- memcg_oom = mem_cgroup_toggle_oom(false);
do_sync_mmap_readahead(vma, ra, file, offset);
- mem_cgroup_toggle_oom(memcg_oom);
count_vm_event(PGMAJFAULT);
mem_cgroup_count_vm_event(vma->vm_mm, PGMAJFAULT);
ret = VM_FAULT_MAJOR;
mmun_start = haddr;
mmun_end = haddr + HPAGE_PMD_SIZE;
+again:
mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
spin_lock(&mm->page_table_lock);
if (unlikely(!pmd_trans_huge(*pmd))) {
split_huge_page(page);
put_page(page);
- BUG_ON(pmd_trans_huge(*pmd));
+
+ /*
+ * We don't always have down_write of mmap_sem here: a racing
+ * do_huge_pmd_wp_page() might have copied-on-write to another
+ * huge page before our split_huge_page() got the anon_vma lock.
+ */
+ if (unlikely(pmd_trans_huge(*pmd)))
+ goto again;
}
void split_huge_page_pmd_mm(struct mm_struct *mm, unsigned long address,
BUG_ON(page_count(page));
BUG_ON(page_mapcount(page));
restore_reserve = PagePrivate(page);
+ ClearPagePrivate(page);
spin_lock(&hugetlb_lock);
hugetlb_cgroup_uncharge_page(hstate_index(h),
/* we rely on prep_new_huge_page to set the destructor */
set_compound_order(page, order);
__SetPageHead(page);
+ __ClearPageReserved(page);
for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) {
__SetPageTail(p);
+ /*
+ * For gigantic hugepages allocated through bootmem at
+ * boot, it's safer to be consistent with the not-gigantic
+ * hugepages and clear the PG_reserved bit from all tail pages
+ * too. Otherwse drivers using get_user_pages() to access tail
+ * pages may get the reference counting wrong if they see
+ * PG_reserved set on a tail page (despite the head page not
+ * having PG_reserved set). Enforcing this consistency between
+ * head and tail pages allows drivers to optimize away a check
+ * on the head page when they need know if put_page() is needed
+ * after get_user_pages().
+ */
+ __ClearPageReserved(p);
set_page_count(p, 0);
p->first_page = page;
}
#else
page = virt_to_page(m);
#endif
- __ClearPageReserved(page);
WARN_ON(page_count(page) != 1);
prep_compound_huge_page(page, h->order);
+ WARN_ON(PageReserved(page));
prep_new_huge_page(h, page, page_to_nid(page));
/*
* If we had gigantic hugepages allocated at boot time, we need
unsigned long val = 0;
int cpu;
+ get_online_cpus();
for_each_online_cpu(cpu)
val += per_cpu(memcg->stat->events[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
val += memcg->nocpu_base.events[idx];
spin_unlock(&memcg->pcp_counter_lock);
#endif
+ put_online_cpus();
return val;
}
memcg_wakeup_oom(memcg);
}
-/*
- * try to call OOM killer
- */
static void mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
{
- bool locked;
- int wakeups;
-
if (!current->memcg_oom.may_oom)
return;
-
- current->memcg_oom.in_memcg_oom = 1;
-
/*
- * As with any blocking lock, a contender needs to start
- * listening for wakeups before attempting the trylock,
- * otherwise it can miss the wakeup from the unlock and sleep
- * indefinitely. This is just open-coded because our locking
- * is so particular to memcg hierarchies.
+ * We are in the middle of the charge context here, so we
+ * don't want to block when potentially sitting on a callstack
+ * that holds all kinds of filesystem and mm locks.
+ *
+ * Also, the caller may handle a failed allocation gracefully
+ * (like optional page cache readahead) and so an OOM killer
+ * invocation might not even be necessary.
+ *
+ * That's why we don't do anything here except remember the
+ * OOM context and then deal with it at the end of the page
+ * fault when the stack is unwound, the locks are released,
+ * and when we know whether the fault was overall successful.
*/
- wakeups = atomic_read(&memcg->oom_wakeups);
- mem_cgroup_mark_under_oom(memcg);
-
- locked = mem_cgroup_oom_trylock(memcg);
-
- if (locked)
- mem_cgroup_oom_notify(memcg);
-
- if (locked && !memcg->oom_kill_disable) {
- mem_cgroup_unmark_under_oom(memcg);
- mem_cgroup_out_of_memory(memcg, mask, order);
- mem_cgroup_oom_unlock(memcg);
- /*
- * There is no guarantee that an OOM-lock contender
- * sees the wakeups triggered by the OOM kill
- * uncharges. Wake any sleepers explicitely.
- */
- memcg_oom_recover(memcg);
- } else {
- /*
- * A system call can just return -ENOMEM, but if this
- * is a page fault and somebody else is handling the
- * OOM already, we need to sleep on the OOM waitqueue
- * for this memcg until the situation is resolved.
- * Which can take some time because it might be
- * handled by a userspace task.
- *
- * However, this is the charge context, which means
- * that we may sit on a large call stack and hold
- * various filesystem locks, the mmap_sem etc. and we
- * don't want the OOM handler to deadlock on them
- * while we sit here and wait. Store the current OOM
- * context in the task_struct, then return -ENOMEM.
- * At the end of the page fault handler, with the
- * stack unwound, pagefault_out_of_memory() will check
- * back with us by calling
- * mem_cgroup_oom_synchronize(), possibly putting the
- * task to sleep.
- */
- current->memcg_oom.oom_locked = locked;
- current->memcg_oom.wakeups = wakeups;
- css_get(&memcg->css);
- current->memcg_oom.wait_on_memcg = memcg;
- }
+ css_get(&memcg->css);
+ current->memcg_oom.memcg = memcg;
+ current->memcg_oom.gfp_mask = mask;
+ current->memcg_oom.order = order;
}
/**
* mem_cgroup_oom_synchronize - complete memcg OOM handling
+ * @handle: actually kill/wait or just clean up the OOM state
*
- * This has to be called at the end of a page fault if the the memcg
- * OOM handler was enabled and the fault is returning %VM_FAULT_OOM.
+ * This has to be called at the end of a page fault if the memcg OOM
+ * handler was enabled.
*
- * Memcg supports userspace OOM handling, so failed allocations must
+ * Memcg supports userspace OOM handling where failed allocations must
* sleep on a waitqueue until the userspace task resolves the
* situation. Sleeping directly in the charge context with all kinds
* of locks held is not a good idea, instead we remember an OOM state
* in the task and mem_cgroup_oom_synchronize() has to be called at
- * the end of the page fault to put the task to sleep and clean up the
- * OOM state.
+ * the end of the page fault to complete the OOM handling.
*
* Returns %true if an ongoing memcg OOM situation was detected and
- * finalized, %false otherwise.
+ * completed, %false otherwise.
*/
-bool mem_cgroup_oom_synchronize(void)
+bool mem_cgroup_oom_synchronize(bool handle)
{
+ struct mem_cgroup *memcg = current->memcg_oom.memcg;
struct oom_wait_info owait;
- struct mem_cgroup *memcg;
+ bool locked;
/* OOM is global, do not handle */
- if (!current->memcg_oom.in_memcg_oom)
- return false;
-
- /*
- * We invoked the OOM killer but there is a chance that a kill
- * did not free up any charges. Everybody else might already
- * be sleeping, so restart the fault and keep the rampage
- * going until some charges are released.
- */
- memcg = current->memcg_oom.wait_on_memcg;
if (!memcg)
- goto out;
+ return false;
- if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
- goto out_memcg;
+ if (!handle)
+ goto cleanup;
owait.memcg = memcg;
owait.wait.flags = 0;
INIT_LIST_HEAD(&owait.wait.task_list);
prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
- /* Only sleep if we didn't miss any wakeups since OOM */
- if (atomic_read(&memcg->oom_wakeups) == current->memcg_oom.wakeups)
+ mem_cgroup_mark_under_oom(memcg);
+
+ locked = mem_cgroup_oom_trylock(memcg);
+
+ if (locked)
+ mem_cgroup_oom_notify(memcg);
+
+ if (locked && !memcg->oom_kill_disable) {
+ mem_cgroup_unmark_under_oom(memcg);
+ finish_wait(&memcg_oom_waitq, &owait.wait);
+ mem_cgroup_out_of_memory(memcg, current->memcg_oom.gfp_mask,
+ current->memcg_oom.order);
+ } else {
schedule();
- finish_wait(&memcg_oom_waitq, &owait.wait);
-out_memcg:
- mem_cgroup_unmark_under_oom(memcg);
- if (current->memcg_oom.oom_locked) {
+ mem_cgroup_unmark_under_oom(memcg);
+ finish_wait(&memcg_oom_waitq, &owait.wait);
+ }
+
+ if (locked) {
mem_cgroup_oom_unlock(memcg);
/*
* There is no guarantee that an OOM-lock contender
*/
memcg_oom_recover(memcg);
}
+cleanup:
+ current->memcg_oom.memcg = NULL;
css_put(&memcg->css);
- current->memcg_oom.wait_on_memcg = NULL;
-out:
- current->memcg_oom.in_memcg_oom = 0;
return true;
}
|| fatal_signal_pending(current)))
goto bypass;
+ if (unlikely(task_in_memcg_oom(current)))
+ goto bypass;
+
/*
* We always charge the cgroup the mm_struct belongs to.
* The mm_struct's mem_cgroup changes on task migration if the
return 0;
nomem:
*ptr = NULL;
+ if (gfp_mask & __GFP_NOFAIL)
+ return 0;
return -ENOMEM;
bypass:
*ptr = root_mem_cgroup;
*/
make_migration_entry_read(&entry);
pte = swp_entry_to_pte(entry);
+ if (pte_swp_soft_dirty(*src_pte))
+ pte = pte_swp_mksoft_dirty(pte);
set_pte_at(src_mm, addr, src_pte, pte);
}
}
* space. Kernel faults are handled more gracefully.
*/
if (flags & FAULT_FLAG_USER)
- mem_cgroup_enable_oom();
+ mem_cgroup_oom_enable();
ret = __handle_mm_fault(mm, vma, address, flags);
- if (flags & FAULT_FLAG_USER)
- mem_cgroup_disable_oom();
-
- if (WARN_ON(task_in_memcg_oom(current) && !(ret & VM_FAULT_OOM)))
- mem_cgroup_oom_synchronize();
+ if (flags & FAULT_FLAG_USER) {
+ mem_cgroup_oom_disable();
+ /*
+ * The task may have entered a memcg OOM situation but
+ * if the allocation error was handled gracefully (no
+ * VM_FAULT_OOM), there is no need to kill anything.
+ * Just clean up the OOM state peacefully.
+ */
+ if (task_in_memcg_oom(current) && !(ret & VM_FAULT_OOM))
+ mem_cgroup_oom_synchronize(false);
+ }
return ret;
}
get_page(new);
pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
+ if (pte_swp_soft_dirty(*ptep))
+ pte = pte_mksoft_dirty(pte);
if (is_write_migration_entry(entry))
pte = pte_mkwrite(pte);
#ifdef CONFIG_HUGETLB_PAGE
swp_entry_t entry = pte_to_swp_entry(oldpte);
if (is_write_migration_entry(entry)) {
+ pte_t newpte;
/*
* A protection check is difficult so
* just be safe and disable write
*/
make_migration_entry_read(&entry);
- set_pte_at(mm, addr, pte,
- swp_entry_to_pte(entry));
+ newpte = swp_entry_to_pte(entry);
+ if (pte_swp_soft_dirty(oldpte))
+ newpte = pte_swp_mksoft_dirty(newpte);
+ set_pte_at(mm, addr, pte, newpte);
}
pages++;
}
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-#include <asm/pgalloc.h>
#include "internal.h"
return NULL;
pmd = pmd_alloc(mm, pud, addr);
- if (!pmd) {
- pud_free(mm, pud);
+ if (!pmd)
return NULL;
- }
VM_BUG_ON(pmd_trans_huge(*pmd));
{
struct zonelist *zonelist;
- if (mem_cgroup_oom_synchronize())
+ if (mem_cgroup_oom_synchronize(true))
return;
zonelist = node_zonelist(first_online_node, GFP_KERNEL);
return 1;
}
-static long bdi_max_pause(struct backing_dev_info *bdi,
- unsigned long bdi_dirty)
+static unsigned long bdi_max_pause(struct backing_dev_info *bdi,
+ unsigned long bdi_dirty)
{
- long bw = bdi->avg_write_bandwidth;
- long t;
+ unsigned long bw = bdi->avg_write_bandwidth;
+ unsigned long t;
/*
* Limit pause time for small memory systems. If sleeping for too long
t = bdi_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
t++;
- return min_t(long, t, MAX_PAUSE);
+ return min_t(unsigned long, t, MAX_PAUSE);
}
static long bdi_min_pause(struct backing_dev_info *bdi,
continue;
}
+#if !defined(CONFIG_SLUB) || !defined(CONFIG_SLUB_DEBUG_ON)
/*
* For simplicity, we won't check this in the list of memcg
* caches. We have control over memcg naming, and if there
s = NULL;
return -EINVAL;
}
+#endif
}
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
struct filename *pathname;
int i, type, prev;
int err;
+ unsigned int old_block_size;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
}
swap_file = p->swap_file;
+ old_block_size = p->old_block_size;
p->swap_file = NULL;
p->max = 0;
swap_map = p->swap_map;
inode = mapping->host;
if (S_ISBLK(inode->i_mode)) {
struct block_device *bdev = I_BDEV(inode);
- set_blocksize(bdev, p->old_block_size);
+ set_blocksize(bdev, old_block_size);
blkdev_put(bdev, FMODE_READ | FMODE_WRITE | FMODE_EXCL);
} else {
mutex_lock(&inode->i_mutex);
down_write(&shrinker_rwsem);
list_del(&shrinker->list);
up_write(&shrinker_rwsem);
+ kfree(shrinker->nr_deferred);
}
EXPORT_SYMBOL(unregister_shrinker);
}
tree->rbroot = RB_ROOT;
spin_unlock(&tree->lock);
+
+ zbud_destroy_pool(tree->pool);
+ kfree(tree);
+ zswap_trees[type] = NULL;
}
static struct zbud_ops zswap_zbud_ops = {
/* check if the next ns is a sibling, parent, gp, .. */
parent = ns->parent;
- while (parent) {
+ while (ns != root) {
mutex_unlock(&ns->lock);
next = list_entry_next(ns, base.list);
if (!list_entry_is_head(next, &parent->sub_ns, base.list)) {
mutex_lock(&next->lock);
return next;
}
- if (parent == root)
- return NULL;
ns = parent;
parent = parent->parent;
}
aa_put_dfa(profile->policy.dfa);
aa_put_replacedby(profile->replacedby);
+ kzfree(profile->hash);
kzfree(profile);
}
if (!multi)
err = create_single_cap_vol_ctl(codec, n, vol, sw,
inv_dmic);
- else if (!multi_cap_vol)
+ else if (!multi_cap_vol && !inv_dmic)
err = create_bind_cap_vol_ctl(codec, n, vol, sw);
else
err = create_multi_cap_vol_ctl(codec);
if ((err = hdsp_get_iobox_version(hdsp)) < 0)
return err;
}
+ memset(&hdsp_version, 0, sizeof(hdsp_version));
hdsp_version.io_type = hdsp->io_type;
hdsp_version.firmware_rev = hdsp->firmware_rev;
if ((err = copy_to_user(argp, &hdsp_version, sizeof(hdsp_version))))
}
area->vm_ops = &usb_stream_hwdep_vm_ops;
- area->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+ area->vm_flags |= VM_DONTDUMP;
+ if (!read)
+ area->vm_flags |= VM_DONTEXPAND;
area->vm_private_data = us122l;
atomic_inc(&us122l->mmap_count);
out:
fflush(stdout);
done = 0;
- timer_create(which, NULL, &id);
+ err = timer_create(which, NULL, &id);
if (err < 0) {
perror("Can't create timer\n");
return -1;
projects / karo-tx-linux.git / commitdiff