* Description: Amplicon 200 Series Digital I/O
* Author: Ian Abbott <abbotti@mev.co.uk>
* Devices: [Amplicon] PC212E (pc212e), PC214E (pc214e), PC215E (pc215e),
- * PCI215 (pci215), PC218E (pc218e), PC272E (pc272e), PCI272 (pci272)
- * Updated: Wed, 22 Oct 2008 13:36:02 +0100
+ * PCI215 (pci215), PCIe215 (pcie215), PC218E (pc218e), PCIe236 (pcie236),
+ * PC272E (pc272e), PCI272 (pci272), PCIe296 (pcie296)
+ * Updated: Wed, 24 Oct 2012 16:22:34 +0100
* Status: works
*
* Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
* [0] - I/O port base address
* [1] - IRQ (optional, but commands won't work without it)
*
- * Manual configuration of PCI cards is not supported; they are configured
+ * Manual configuration of PCI(e) cards is not supported; they are configured
* automatically.
*
* Passing a zero for an option is the same as leaving it unspecified.
*
* SUBDEVICES
*
- * PC218E PC212E PC215E/PCI215
+ * PC212E PC214E PC215E/PCI215
* ------------- ------------- -------------
- * Subdevices 7 6 5
- * 0 CTR-X1 PPI-X PPI-X
- * 1 CTR-X2 CTR-Y1 PPI-Y
- * 2 CTR-Y1 CTR-Y2 CTR-Z1
- * 3 CTR-Y2 CTR-Z1 CTR-Z2
- * 4 CTR-Z1 CTR-Z2 INTERRUPT
- * 5 CTR-Z2 INTERRUPT
- * 6 INTERRUPT
+ * Subdevices 6 4 5
+ * 0 PPI-X PPI-X PPI-X
+ * 1 CTR-Y1 PPI-Y PPI-Y
+ * 2 CTR-Y2 CTR-Z1* CTR-Z1
+ * 3 CTR-Z1 INTERRUPT* CTR-Z2
+ * 4 CTR-Z2 INTERRUPT
+ * 5 INTERRUPT
*
- * PC214E PC272E/PCI272
+ * PCIe215 PC218E PCIe236
+ * ------------- ------------- -------------
+ * Subdevices 8 7 8
+ * 0 PPI-X CTR-X1 PPI-X
+ * 1 UNUSED CTR-X2 UNUSED
+ * 2 PPI-Y CTR-Y1 UNUSED
+ * 3 UNUSED CTR-Y2 UNUSED
+ * 4 CTR-Z1 CTR-Z1 CTR-Z1
+ * 5 CTR-Z2 CTR-Z2 CTR-Z2
+ * 6 TIMER INTERRUPT TIMER
+ * 7 INTERRUPT INTERRUPT
+ *
+ * PC272E/PCI272 PCIe296
* ------------- -------------
- * Subdevices 4 4
- * 0 PPI-X PPI-X
- * 1 PPI-Y PPI-Y
- * 2 CTR-Z1* PPI-Z
- * 3 INTERRUPT* INTERRUPT
+ * Subdevices 4 8
+ * 0 PPI-X PPI-X1
+ * 1 PPI-Y PPI-X2
+ * 2 PPI-Z PPI-Y1
+ * 3 INTERRUPT PPI-Y2
+ * 4 CTR-Z1
+ * 5 CTR-Z2
+ * 6 TIMER
+ * 7 INTERRUPT
*
* Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
* are configurable as inputs or outputs in four groups:
* 3. The counter subdevices are connected in a ring, so the highest
* counter subdevice precedes the lowest.
*
+ * The 'TIMER' subdevice is a free-running 32-bit timer subdevice.
+ *
* The 'INTERRUPT' subdevice pretends to be a digital input subdevice. The
* digital inputs come from the interrupt status register. The number of
* channels matches the number of interrupt sources. The PC214E does not
*
* INTERRUPT SOURCES
*
- * PC218E PC212E PC215E/PCI215
+ * PC212E PC214E PC215E/PCI215
+ * ------------- ------------- -------------
+ * Sources 6 1 6
+ * 0 PPI-X-C0 JUMPER-J5 PPI-X-C0
+ * 1 PPI-X-C3 PPI-X-C3
+ * 2 CTR-Y1-OUT1 PPI-Y-C0
+ * 3 CTR-Y2-OUT1 PPI-Y-C3
+ * 4 CTR-Z1-OUT1 CTR-Z1-OUT1
+ * 5 CTR-Z2-OUT1 CTR-Z2-OUT1
+ *
+ * PCIe215 PC218E PCIe236
* ------------- ------------- -------------
* Sources 6 6 6
- * 0 CTR-X1-OUT PPI-X-C0 PPI-X-C0
- * 1 CTR-X2-OUT PPI-X-C3 PPI-X-C3
- * 2 CTR-Y1-OUT CTR-Y1-OUT PPI-Y-C0
- * 3 CTR-Y2-OUT CTR-Y2-OUT PPI-Y-C3
- * 4 CTR-Z1-OUT CTR-Z1-OUT CTR-Z1-OUT
- * 5 CTR-Z2-OUT CTR-Z2-OUT CTR-Z2-OUT
+ * 0 PPI-X-C0 CTR-X1-OUT1 PPI-X-C0
+ * 1 PPI-X-C3 CTR-X2-OUT1 PPI-X-C3
+ * 2 PPI-Y-C0 CTR-Y1-OUT1 unused
+ * 3 PPI-Y-C3 CTR-Y2-OUT1 unused
+ * 4 CTR-Z1-OUT1 CTR-Z1-OUT1 CTR-Z1-OUT1
+ * 5 CTR-Z2-OUT1 CTR-Z2-OUT1 CTR-Z2-OUT1
*
- * PC214E PC272E/PCI272
+ * PC272E/PCI272 PCIe296
* ------------- -------------
- * Sources 1 6
- * 0 JUMPER-J5 PPI-X-C0
- * 1 PPI-X-C3
- * 2 PPI-Y-C0
- * 3 PPI-Y-C3
- * 4 PPI-Z-C0
- * 5 PPI-Z-C3
+ * Sources 6 6
+ * 0 PPI-X-C0 PPI-X1-C0
+ * 1 PPI-X-C3 PPI-X1-C3
+ * 2 PPI-Y-C0 PPI-Y1-C0
+ * 3 PPI-Y-C3 PPI-Y1-C3
+ * 4 PPI-Z-C0 CTR-Z1-OUT1
+ * 5 PPI-Z-C3 CTR-Z2-OUT1
*
* When an interrupt source is enabled in the interrupt source enable
* register, a rising edge on the source signal latches the corresponding
#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
#define PCI_DEVICE_ID_AMPLICON_PCI215 0x000b
-#define PCI_DEVICE_ID_INVALID 0xffff
+#define PCI_DEVICE_ID_AMPLICON_PCIE236 0x0011
+#define PCI_DEVICE_ID_AMPLICON_PCIE215 0x0012
+#define PCI_DEVICE_ID_AMPLICON_PCIE296 0x0014
/* 8255 control register bits */
#define CR_C_LO_IO 0x01
/* 200 series registers */
#define DIO200_IO_SIZE 0x20
+#define DIO200_PCIE_IO_SIZE 0x4000
#define DIO200_XCLK_SCE 0x18 /* Group X clock selection register */
#define DIO200_YCLK_SCE 0x19 /* Group Y clock selection register */
#define DIO200_ZCLK_SCE 0x1a /* Group Z clock selection register */
enum dio200_model {
pc212e_model,
pc214e_model,
- pc215e_model, pci215_model,
+ pc215e_model, pci215_model, pcie215_model,
pc218e_model,
+ pcie236_model,
pc272e_model, pci272_model,
+ pcie296_model,
};
enum dio200_layout_idx {
#if DO_ISA
pc218_layout,
#endif
- pc272_layout
+ pc272_layout,
+#if DO_PCI
+ pcie215_layout,
+ pcie236_layout,
+ pcie296_layout,
+#endif
};
struct dio200_board {
.mainbar = 2,
.mainsize = DIO200_IO_SIZE,
},
+ {
+ .name = "pcie215",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE215,
+ .bustype = pci_bustype,
+ .model = pcie215_model,
+ .layout = pcie215_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
+ },
+ {
+ .name = "pcie236",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE236,
+ .bustype = pci_bustype,
+ .model = pcie236_model,
+ .layout = pcie236_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
+ },
+ {
+ .name = "pcie296",
+ .devid = PCI_DEVICE_ID_AMPLICON_PCIE296,
+ .bustype = pci_bustype,
+ .model = pcie296_model,
+ .layout = pcie296_layout,
+ .mainbar = 1,
+ .mainshift = 3,
+ .mainsize = DIO200_PCIE_IO_SIZE,
+ },
#endif
};
* layout.
*/
-enum dio200_sdtype { sd_none, sd_intr, sd_8255, sd_8254 };
+enum dio200_sdtype { sd_none, sd_intr, sd_8255, sd_8254, sd_timer };
-#define DIO200_MAX_SUBDEVS 7
+#define DIO200_MAX_SUBDEVS 8
#define DIO200_MAX_ISNS 6
struct dio200_layout {
.has_int_sce = 1,
.has_clk_gat_sce = 0,
},
+#if DO_PCI
+ [pcie215_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_none, sd_8255, sd_none,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x00, 0x08, 0x00,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ },
+ [pcie236_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_none, sd_none, sd_none,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x00, 0x00, 0x00,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ },
+ [pcie296_layout] = {
+ .n_subdevs = 8,
+ .sdtype = {sd_8255, sd_8255, sd_8255, sd_8255,
+ sd_8254, sd_8254, sd_timer, sd_intr},
+ .sdinfo = {0x00, 0x04, 0x08, 0x0C,
+ 0x10, 0x14, 0x00, 0x3F},
+ .has_int_sce = 1,
+ .has_clk_gat_sce = 1,
+ },
+#endif
};
/* this structure is for data unique to this hardware driver. If
s->type = COMEDI_SUBD_UNUSED;
}
break;
+ case sd_timer:
+ /* TODO. Fall-thru to default for now. */
default:
s->type = COMEDI_SUBD_UNUSED;
break;
static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE236) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE215) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCIE296) },
{0}
};
projects / karo-tx-linux.git / commitdiff