config HAVE_HW_BREAKPOINT
bool
+ depends on HAVE_PERF_EVENTS
+ select ANON_INODES
+ select PERF_EVENTS
source "kernel/gcov/Kconfig"
header-y += sigcontext32.h
header-y += ucontext.h
header-y += processor-flags.h
+header-y += hw_breakpoint.h
unifdef-y += e820.h
unifdef-y += ist.h
*/
#ifdef __KERNEL__
-/* For process management */
-extern void flush_thread_hw_breakpoint(struct task_struct *tsk);
-extern int copy_thread_hw_breakpoint(struct task_struct *tsk,
- struct task_struct *child, unsigned long clone_flags);
+DECLARE_PER_CPU(unsigned long, dr7);
-/* For CPU management */
-extern void load_debug_registers(void);
static inline void hw_breakpoint_disable(void)
{
/* Zero the control register for HW Breakpoint */
set_debugreg(0UL, 3);
}
+#ifdef CONFIG_KVM
+extern void hw_breakpoint_restore(void);
+#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_X86_DEBUGREG_H */
#ifdef __KERNEL__
#define __ARCH_HW_BREAKPOINT_H
+/*
+ * The name should probably be something dealt in
+ * a higher level. While dealing with the user
+ * (display/resolving)
+ */
struct arch_hw_breakpoint {
char *name; /* Contains name of the symbol to set bkpt */
unsigned long address;
};
#include <linux/kdebug.h>
-#include <linux/hw_breakpoint.h>
+#include <linux/percpu.h>
+#include <linux/list.h>
/* Available HW breakpoint length encodings */
-#define HW_BREAKPOINT_LEN_1 0x40
-#define HW_BREAKPOINT_LEN_2 0x44
-#define HW_BREAKPOINT_LEN_4 0x4c
-#define HW_BREAKPOINT_LEN_EXECUTE 0x40
+#define X86_BREAKPOINT_LEN_1 0x40
+#define X86_BREAKPOINT_LEN_2 0x44
+#define X86_BREAKPOINT_LEN_4 0x4c
+#define X86_BREAKPOINT_LEN_EXECUTE 0x40
#ifdef CONFIG_X86_64
-#define HW_BREAKPOINT_LEN_8 0x48
+#define X86_BREAKPOINT_LEN_8 0x48
#endif
/* Available HW breakpoint type encodings */
/* trigger on instruction execute */
-#define HW_BREAKPOINT_EXECUTE 0x80
+#define X86_BREAKPOINT_EXECUTE 0x80
/* trigger on memory write */
-#define HW_BREAKPOINT_WRITE 0x81
+#define X86_BREAKPOINT_WRITE 0x81
/* trigger on memory read or write */
-#define HW_BREAKPOINT_RW 0x83
+#define X86_BREAKPOINT_RW 0x83
/* Total number of available HW breakpoint registers */
#define HBP_NUM 4
-extern struct hw_breakpoint *hbp_kernel[HBP_NUM];
-DECLARE_PER_CPU(struct hw_breakpoint*, this_hbp_kernel[HBP_NUM]);
-extern unsigned int hbp_user_refcount[HBP_NUM];
+struct perf_event;
+struct pmu;
-extern void arch_install_thread_hw_breakpoint(struct task_struct *tsk);
-extern void arch_uninstall_thread_hw_breakpoint(void);
extern int arch_check_va_in_userspace(unsigned long va, u8 hbp_len);
-extern int arch_validate_hwbkpt_settings(struct hw_breakpoint *bp,
- struct task_struct *tsk);
-extern void arch_update_user_hw_breakpoint(int pos, struct task_struct *tsk);
-extern void arch_flush_thread_hw_breakpoint(struct task_struct *tsk);
-extern void arch_update_kernel_hw_breakpoint(void *);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
+ struct task_struct *tsk);
extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
- unsigned long val, void *data);
+ unsigned long val, void *data);
+
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp);
+
+extern void
+arch_fill_perf_breakpoint(struct perf_event *bp);
+
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type);
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type);
+
+extern int arch_bp_generic_fields(int x86_len, int x86_type,
+ int *gen_len, int *gen_type);
+
+extern struct pmu perf_ops_bp;
+
#endif /* __KERNEL__ */
#endif /* _I386_HW_BREAKPOINT_H */
extern void free_thread_xstate(struct task_struct *);
extern struct kmem_cache *task_xstate_cachep;
+struct perf_event;
+
struct thread_struct {
/* Cached TLS descriptors: */
struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
unsigned long fs;
#endif
unsigned long gs;
- /* Hardware debugging registers: */
- unsigned long debugreg[HBP_NUM];
- unsigned long debugreg6;
- unsigned long debugreg7;
- /* Hardware breakpoint info */
- struct hw_breakpoint *hbp[HBP_NUM];
+ /* Save middle states of ptrace breakpoints */
+ struct perf_event *ptrace_bps[HBP_NUM];
+ /* Debug status used for traps, single steps, etc... */
+ unsigned long debugreg6;
/* Fault info: */
unsigned long cr2;
unsigned long trap_no;
*
* Copyright (C) 2007 Alan Stern
* Copyright (C) 2009 IBM Corporation
+ * Copyright (C) 2009 Frederic Weisbecker <fweisbec@gmail.com>
*/
/*
* using the CPU's debug registers.
*/
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
#include <linux/irqflags.h>
#include <linux/notifier.h>
#include <linux/kallsyms.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
-/* Unmasked kernel DR7 value */
-static unsigned long kdr7;
+/* Per cpu debug control register value */
+DEFINE_PER_CPU(unsigned long, dr7);
+
+/* Per cpu debug address registers values */
+static DEFINE_PER_CPU(unsigned long, cpu_debugreg[HBP_NUM]);
/*
- * Masks for the bits corresponding to registers DR0 - DR3 in DR7 register.
- * Used to clear and verify the status of bits corresponding to DR0 - DR3
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
*/
-static const unsigned long dr7_masks[HBP_NUM] = {
- 0x000f0003, /* LEN0, R/W0, G0, L0 */
- 0x00f0000c, /* LEN1, R/W1, G1, L1 */
- 0x0f000030, /* LEN2, R/W2, G2, L2 */
- 0xf00000c0 /* LEN3, R/W3, G3, L3 */
-};
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
/*
* Encode the length, type, Exact, and Enable bits for a particular breakpoint
* as stored in debug register 7.
*/
-static unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type)
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type)
{
unsigned long bp_info;
return bp_info;
}
-void arch_update_kernel_hw_breakpoint(void *unused)
+/*
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7. Return the "enabled" status.
+ */
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type)
{
- struct hw_breakpoint *bp;
- int i, cpu = get_cpu();
- unsigned long temp_kdr7 = 0;
-
- /* Don't allow debug exceptions while we update the registers */
- set_debugreg(0UL, 7);
+ int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
- for (i = hbp_kernel_pos; i < HBP_NUM; i++) {
- per_cpu(this_hbp_kernel[i], cpu) = bp = hbp_kernel[i];
- if (bp) {
- temp_kdr7 |= encode_dr7(i, bp->info.len, bp->info.type);
- set_debugreg(bp->info.address, i);
- }
- }
+ *len = (bp_info & 0xc) | 0x40;
+ *type = (bp_info & 0x3) | 0x80;
- /* No need to set DR6. Update the debug registers with kernel-space
- * breakpoint values from kdr7 and user-space requests from the
- * current process
- */
- kdr7 = temp_kdr7;
- set_debugreg(kdr7 | current->thread.debugreg7, 7);
- put_cpu();
+ return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
}
/*
- * Install the thread breakpoints in their debug registers.
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint. Eventually we enable it in the debug control register.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
*/
-void arch_install_thread_hw_breakpoint(struct task_struct *tsk)
+int arch_install_hw_breakpoint(struct perf_event *bp)
{
- struct thread_struct *thread = &(tsk->thread);
-
- switch (hbp_kernel_pos) {
- case 4:
- set_debugreg(thread->debugreg[3], 3);
- case 3:
- set_debugreg(thread->debugreg[2], 2);
- case 2:
- set_debugreg(thread->debugreg[1], 1);
- case 1:
- set_debugreg(thread->debugreg[0], 0);
- default:
- break;
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ unsigned long *dr7;
+ int i;
+
+ for (i = 0; i < HBP_NUM; i++) {
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+ if (!*slot) {
+ *slot = bp;
+ break;
+ }
}
- /* No need to set DR6 */
- set_debugreg((kdr7 | thread->debugreg7), 7);
+ if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+ return -EBUSY;
+
+ set_debugreg(info->address, i);
+ __get_cpu_var(cpu_debugreg[i]) = info->address;
+
+ dr7 = &__get_cpu_var(dr7);
+ *dr7 |= encode_dr7(i, info->len, info->type);
+
+ set_debugreg(*dr7, 7);
+
+ return 0;
}
/*
- * Install the debug register values for just the kernel, no thread.
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
*/
-void arch_uninstall_thread_hw_breakpoint(void)
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
{
- /* Clear the user-space portion of debugreg7 by setting only kdr7 */
- set_debugreg(kdr7, 7);
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ unsigned long *dr7;
+ int i;
+
+ for (i = 0; i < HBP_NUM; i++) {
+ struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+ if (*slot == bp) {
+ *slot = NULL;
+ break;
+ }
+ }
+
+ if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+ return;
+ dr7 = &__get_cpu_var(dr7);
+ *dr7 &= ~encode_dr7(i, info->len, info->type);
+
+ set_debugreg(*dr7, 7);
}
static int get_hbp_len(u8 hbp_len)
unsigned int len_in_bytes = 0;
switch (hbp_len) {
- case HW_BREAKPOINT_LEN_1:
+ case X86_BREAKPOINT_LEN_1:
len_in_bytes = 1;
break;
- case HW_BREAKPOINT_LEN_2:
+ case X86_BREAKPOINT_LEN_2:
len_in_bytes = 2;
break;
- case HW_BREAKPOINT_LEN_4:
+ case X86_BREAKPOINT_LEN_4:
len_in_bytes = 4;
break;
#ifdef CONFIG_X86_64
- case HW_BREAKPOINT_LEN_8:
+ case X86_BREAKPOINT_LEN_8:
len_in_bytes = 8;
break;
#endif
/*
* Store a breakpoint's encoded address, length, and type.
*/
-static int arch_store_info(struct hw_breakpoint *bp, struct task_struct *tsk)
+static int arch_store_info(struct perf_event *bp)
{
- /*
- * User-space requests will always have the address field populated
- * Symbol names from user-space are rejected
- */
- if (tsk && bp->info.name)
- return -EINVAL;
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
/*
* For kernel-addresses, either the address or symbol name can be
* specified.
*/
- if (bp->info.name)
- bp->info.address = (unsigned long)
- kallsyms_lookup_name(bp->info.name);
- if (bp->info.address)
+ if (info->name)
+ info->address = (unsigned long)
+ kallsyms_lookup_name(info->name);
+ if (info->address)
return 0;
+
return -EINVAL;
}
-/*
- * Validate the arch-specific HW Breakpoint register settings
- */
-int arch_validate_hwbkpt_settings(struct hw_breakpoint *bp,
- struct task_struct *tsk)
+int arch_bp_generic_fields(int x86_len, int x86_type,
+ int *gen_len, int *gen_type)
{
- unsigned int align;
- int ret = -EINVAL;
+ /* Len */
+ switch (x86_len) {
+ case X86_BREAKPOINT_LEN_1:
+ *gen_len = HW_BREAKPOINT_LEN_1;
+ break;
+ case X86_BREAKPOINT_LEN_2:
+ *gen_len = HW_BREAKPOINT_LEN_2;
+ break;
+ case X86_BREAKPOINT_LEN_4:
+ *gen_len = HW_BREAKPOINT_LEN_4;
+ break;
+#ifdef CONFIG_X86_64
+ case X86_BREAKPOINT_LEN_8:
+ *gen_len = HW_BREAKPOINT_LEN_8;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
- switch (bp->info.type) {
- /*
- * Ptrace-refactoring code
- * For now, we'll allow instruction breakpoint only for user-space
- * addresses
- */
- case HW_BREAKPOINT_EXECUTE:
- if ((!arch_check_va_in_userspace(bp->info.address,
- bp->info.len)) &&
- bp->info.len != HW_BREAKPOINT_LEN_EXECUTE)
- return ret;
+ /* Type */
+ switch (x86_type) {
+ case X86_BREAKPOINT_EXECUTE:
+ *gen_type = HW_BREAKPOINT_X;
break;
- case HW_BREAKPOINT_WRITE:
+ case X86_BREAKPOINT_WRITE:
+ *gen_type = HW_BREAKPOINT_W;
break;
- case HW_BREAKPOINT_RW:
+ case X86_BREAKPOINT_RW:
+ *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
break;
default:
- return ret;
+ return -EINVAL;
}
- switch (bp->info.len) {
+ return 0;
+}
+
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+ info->address = bp->attr.bp_addr;
+
+ /* Len */
+ switch (bp->attr.bp_len) {
case HW_BREAKPOINT_LEN_1:
- align = 0;
+ info->len = X86_BREAKPOINT_LEN_1;
break;
case HW_BREAKPOINT_LEN_2:
- align = 1;
+ info->len = X86_BREAKPOINT_LEN_2;
break;
case HW_BREAKPOINT_LEN_4:
- align = 3;
+ info->len = X86_BREAKPOINT_LEN_4;
break;
#ifdef CONFIG_X86_64
case HW_BREAKPOINT_LEN_8:
+ info->len = X86_BREAKPOINT_LEN_8;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+
+ /* Type */
+ switch (bp->attr.bp_type) {
+ case HW_BREAKPOINT_W:
+ info->type = X86_BREAKPOINT_WRITE;
+ break;
+ case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+ info->type = X86_BREAKPOINT_RW;
+ break;
+ case HW_BREAKPOINT_X:
+ info->type = X86_BREAKPOINT_EXECUTE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp,
+ struct task_struct *tsk)
+{
+ struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+ unsigned int align;
+ int ret;
+
+
+ ret = arch_build_bp_info(bp);
+ if (ret)
+ return ret;
+
+ ret = -EINVAL;
+
+ if (info->type == X86_BREAKPOINT_EXECUTE)
+ /*
+ * Ptrace-refactoring code
+ * For now, we'll allow instruction breakpoint only for user-space
+ * addresses
+ */
+ if ((!arch_check_va_in_userspace(info->address, info->len)) &&
+ info->len != X86_BREAKPOINT_EXECUTE)
+ return ret;
+
+ switch (info->len) {
+ case X86_BREAKPOINT_LEN_1:
+ align = 0;
+ break;
+ case X86_BREAKPOINT_LEN_2:
+ align = 1;
+ break;
+ case X86_BREAKPOINT_LEN_4:
+ align = 3;
+ break;
+#ifdef CONFIG_X86_64
+ case X86_BREAKPOINT_LEN_8:
align = 7;
break;
#endif
return ret;
}
- if (bp->triggered)
- ret = arch_store_info(bp, tsk);
+ if (bp->callback)
+ ret = arch_store_info(bp);
if (ret < 0)
return ret;
* Check that the low-order bits of the address are appropriate
* for the alignment implied by len.
*/
- if (bp->info.address & align)
+ if (info->address & align)
return -EINVAL;
/* Check that the virtual address is in the proper range */
if (tsk) {
- if (!arch_check_va_in_userspace(bp->info.address, bp->info.len))
+ if (!arch_check_va_in_userspace(info->address, info->len))
return -EFAULT;
} else {
- if (!arch_check_va_in_kernelspace(bp->info.address,
- bp->info.len))
+ if (!arch_check_va_in_kernelspace(info->address, info->len))
return -EFAULT;
}
+
return 0;
}
-void arch_update_user_hw_breakpoint(int pos, struct task_struct *tsk)
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
{
- struct thread_struct *thread = &(tsk->thread);
- struct hw_breakpoint *bp = thread->hbp[pos];
-
- thread->debugreg7 &= ~dr7_masks[pos];
- if (bp) {
- thread->debugreg[pos] = bp->info.address;
- thread->debugreg7 |= encode_dr7(pos, bp->info.len,
- bp->info.type);
- } else
- thread->debugreg[pos] = 0;
+ int i;
+ struct thread_struct *t = &tsk->thread;
+
+ for (i = 0; i < HBP_NUM; i++) {
+ unregister_hw_breakpoint(t->ptrace_bps[i]);
+ t->ptrace_bps[i] = NULL;
+ }
}
-void arch_flush_thread_hw_breakpoint(struct task_struct *tsk)
+#ifdef CONFIG_KVM
+void hw_breakpoint_restore(void)
{
- int i;
- struct thread_struct *thread = &(tsk->thread);
-
- thread->debugreg7 = 0;
- for (i = 0; i < HBP_NUM; i++)
- thread->debugreg[i] = 0;
+ set_debugreg(__get_cpu_var(cpu_debugreg[0]), 0);
+ set_debugreg(__get_cpu_var(cpu_debugreg[1]), 1);
+ set_debugreg(__get_cpu_var(cpu_debugreg[2]), 2);
+ set_debugreg(__get_cpu_var(cpu_debugreg[3]), 3);
+ set_debugreg(current->thread.debugreg6, 6);
+ set_debugreg(__get_cpu_var(dr7), 7);
}
+EXPORT_SYMBOL_GPL(hw_breakpoint_restore);
+#endif
/*
* Handle debug exception notifications.
static int __kprobes hw_breakpoint_handler(struct die_args *args)
{
int i, cpu, rc = NOTIFY_STOP;
- struct hw_breakpoint *bp;
+ struct perf_event *bp;
unsigned long dr7, dr6;
unsigned long *dr6_p;
if ((dr6 & DR_TRAP_BITS) == 0)
return NOTIFY_DONE;
- /* Lazy debug register switching */
- if (!test_tsk_thread_flag(current, TIF_DEBUG))
- arch_uninstall_thread_hw_breakpoint();
-
get_debugreg(dr7, 7);
/* Disable breakpoints during exception handling */
set_debugreg(0UL, 7);
for (i = 0; i < HBP_NUM; ++i) {
if (likely(!(dr6 & (DR_TRAP0 << i))))
continue;
+
/*
- * Find the corresponding hw_breakpoint structure and
- * invoke its triggered callback.
+ * The counter may be concurrently released but that can only
+ * occur from a call_rcu() path. We can then safely fetch
+ * the breakpoint, use its callback, touch its counter
+ * while we are in an rcu_read_lock() path.
*/
- if (i >= hbp_kernel_pos)
- bp = per_cpu(this_hbp_kernel[i], cpu);
- else {
- bp = current->thread.hbp[i];
- if (bp)
- rc = NOTIFY_DONE;
- }
+ rcu_read_lock();
+
+ bp = per_cpu(bp_per_reg[i], cpu);
+ if (bp)
+ rc = NOTIFY_DONE;
/*
* Reset the 'i'th TRAP bit in dr6 to denote completion of
* exception handling
(*dr6_p) &= ~(DR_TRAP0 << i);
/*
* bp can be NULL due to lazy debug register switching
- * or due to the delay between updates of hbp_kernel_pos
- * and this_hbp_kernel.
+ * or due to concurrent perf counter removing.
*/
- if (!bp)
- continue;
+ if (!bp) {
+ rcu_read_unlock();
+ break;
+ }
+
+ (bp->callback)(bp, args->regs);
- (bp->triggered)(bp, args->regs);
+ rcu_read_unlock();
}
if (dr6 & (~DR_TRAP_BITS))
rc = NOTIFY_DONE;
set_debugreg(dr7, 7);
put_cpu();
+
return rc;
}
return hw_breakpoint_handler(data);
}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+ /* TODO */
+}
+
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
+{
+ /* TODO */
+}
#include <linux/clockchips.h>
#include <linux/random.h>
#include <trace/events/power.h>
+#include <linux/hw_breakpoint.h>
#include <asm/system.h>
#include <asm/apic.h>
#include <asm/syscalls.h>
#include <asm/i387.h>
#include <asm/ds.h>
#include <asm/debugreg.h>
-#include <asm/hw_breakpoint.h>
unsigned long idle_halt;
EXPORT_SYMBOL(idle_halt);
kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
tsk->thread.xstate = NULL;
}
- if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
- flush_thread_hw_breakpoint(tsk);
WARN(tsk->thread.ds_ctx, "leaking DS context\n");
}
}
#endif
- if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
- flush_thread_hw_breakpoint(tsk);
+ flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
/*
* Forget coprocessor state..
#include <asm/syscalls.h>
#include <asm/ds.h>
#include <asm/debugreg.h>
-#include <asm/hw_breakpoint.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
p->thread.io_bitmap_ptr = NULL;
tsk = current;
err = -ENOMEM;
- if (unlikely(test_tsk_thread_flag(tsk, TIF_DEBUG)))
- if (copy_thread_hw_breakpoint(tsk, p, clone_flags))
- goto out;
+
+ memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
err = do_set_thread_area(p, -1,
(struct user_desc __user *)childregs->si, 0);
-out:
if (err && p->thread.io_bitmap_ptr) {
kfree(p->thread.io_bitmap_ptr);
p->thread.io_bitmap_max = 0;
}
- if (err)
- flush_thread_hw_breakpoint(p);
clear_tsk_thread_flag(p, TIF_DS_AREA_MSR);
p->thread.ds_ctx = NULL;
lazy_load_gs(next->gs);
percpu_write(current_task, next_p);
- /*
- * There's a problem with moving the arch_install_thread_hw_breakpoint()
- * call before current is updated. Suppose a kernel breakpoint is
- * triggered in between the two, the hw-breakpoint handler will see that
- * the 'current' task does not have TIF_DEBUG flag set and will think it
- * is leftover from an old task (lazy switching) and will erase it. Then
- * until the next context switch, no user-breakpoints will be installed.
- *
- * The real problem is that it's impossible to update both current and
- * physical debug registers at the same instant, so there will always be
- * a window in which they disagree and a breakpoint might get triggered.
- * Since we use lazy switching, we are forced to assume that a
- * disagreement means that current is correct and the exception is due
- * to lazy debug register switching.
- */
- if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
- arch_install_thread_hw_breakpoint(next_p);
return prev_p;
}
#include <asm/syscalls.h>
#include <asm/ds.h>
#include <asm/debugreg.h>
-#include <asm/hw_breakpoint.h>
asmlinkage extern void ret_from_fork(void);
BUG();
}
}
- if (unlikely(dead_task->thread.debugreg7))
- flush_thread_hw_breakpoint(dead_task);
}
static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr)
savesegment(ds, p->thread.ds);
err = -ENOMEM;
- if (unlikely(test_tsk_thread_flag(me, TIF_DEBUG)))
- if (copy_thread_hw_breakpoint(me, p, clone_flags))
- goto out;
+ memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
kfree(p->thread.io_bitmap_ptr);
p->thread.io_bitmap_max = 0;
}
- if (err)
- flush_thread_hw_breakpoint(p);
return err;
}
*/
if (preload_fpu)
__math_state_restore();
- /*
- * There's a problem with moving the arch_install_thread_hw_breakpoint()
- * call before current is updated. Suppose a kernel breakpoint is
- * triggered in between the two, the hw-breakpoint handler will see that
- * the 'current' task does not have TIF_DEBUG flag set and will think it
- * is leftover from an old task (lazy switching) and will erase it. Then
- * until the next context switch, no user-breakpoints will be installed.
- *
- * The real problem is that it's impossible to update both current and
- * physical debug registers at the same instant, so there will always be
- * a window in which they disagree and a breakpoint might get triggered.
- * Since we use lazy switching, we are forced to assume that a
- * disagreement means that current is correct and the exception is due
- * to lazy debug register switching.
- */
- if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
- arch_install_thread_hw_breakpoint(next_p);
return prev_p;
}
#include <linux/seccomp.h>
#include <linux/signal.h>
#include <linux/workqueue.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
return ret;
}
-/*
- * Decode the length and type bits for a particular breakpoint as
- * stored in debug register 7. Return the "enabled" status.
- */
-static int decode_dr7(unsigned long dr7, int bpnum, unsigned *len,
- unsigned *type)
-{
- int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
-
- *len = (bp_info & 0xc) | 0x40;
- *type = (bp_info & 0x3) | 0x80;
- return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
-}
-
-static void ptrace_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+static void ptrace_triggered(struct perf_event *bp, void *data)
{
- struct thread_struct *thread = &(current->thread);
int i;
+ struct thread_struct *thread = &(current->thread);
/*
* Store in the virtual DR6 register the fact that the breakpoint
* was hit so the thread's debugger will see it.
*/
- for (i = 0; i < hbp_kernel_pos; i++)
- /*
- * We will check bp->info.address against the address stored in
- * thread's hbp structure and not debugreg[i]. This is to ensure
- * that the corresponding bit for 'i' in DR7 register is enabled
- */
- if (bp->info.address == thread->hbp[i]->info.address)
+ for (i = 0; i < HBP_NUM; i++) {
+ if (thread->ptrace_bps[i] == bp)
break;
+ }
thread->debugreg6 |= (DR_TRAP0 << i);
}
+/*
+ * Walk through every ptrace breakpoints for this thread and
+ * build the dr7 value on top of their attributes.
+ *
+ */
+static unsigned long ptrace_get_dr7(struct perf_event *bp[])
+{
+ int i;
+ int dr7 = 0;
+ struct arch_hw_breakpoint *info;
+
+ for (i = 0; i < HBP_NUM; i++) {
+ if (bp[i] && !bp[i]->attr.disabled) {
+ info = counter_arch_bp(bp[i]);
+ dr7 |= encode_dr7(i, info->len, info->type);
+ }
+ }
+
+ return dr7;
+}
+
/*
* Handle ptrace writes to debug register 7.
*/
static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
{
struct thread_struct *thread = &(tsk->thread);
- unsigned long old_dr7 = thread->debugreg7;
+ unsigned long old_dr7;
int i, orig_ret = 0, rc = 0;
int enabled, second_pass = 0;
unsigned len, type;
- struct hw_breakpoint *bp;
+ int gen_len, gen_type;
+ struct perf_event *bp;
data &= ~DR_CONTROL_RESERVED;
+ old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
restore:
/*
* Loop through all the hardware breakpoints, making the
*/
for (i = 0; i < HBP_NUM; i++) {
enabled = decode_dr7(data, i, &len, &type);
- bp = thread->hbp[i];
+ bp = thread->ptrace_bps[i];
if (!enabled) {
if (bp) {
- /* Don't unregister the breakpoints right-away,
+ /*
+ * Don't unregister the breakpoints right-away,
* unless all register_user_hw_breakpoint()
* requests have succeeded. This prevents
* any window of opportunity for debug
*/
if (!second_pass)
continue;
- unregister_user_hw_breakpoint(tsk, bp);
- kfree(bp);
+ thread->ptrace_bps[i] = NULL;
+ unregister_hw_breakpoint(bp);
}
continue;
}
+
+ /*
+ * We shoud have at least an inactive breakpoint at this
+ * slot. It means the user is writing dr7 without having
+ * written the address register first
+ */
if (!bp) {
- rc = -ENOMEM;
- bp = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL);
- if (bp) {
- bp->info.address = thread->debugreg[i];
- bp->triggered = ptrace_triggered;
- bp->info.len = len;
- bp->info.type = type;
- rc = register_user_hw_breakpoint(tsk, bp);
- if (rc)
- kfree(bp);
- }
- } else
- rc = modify_user_hw_breakpoint(tsk, bp);
+ rc = -EINVAL;
+ break;
+ }
+
+ rc = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
if (rc)
break;
+
+ /*
+ * This is a temporary thing as bp is unregistered/registered
+ * to simulate modification
+ */
+ bp = modify_user_hw_breakpoint(bp, bp->attr.bp_addr, gen_len,
+ gen_type, bp->callback,
+ tsk, true);
+ thread->ptrace_bps[i] = NULL;
+
+ if (!bp) { /* incorrect bp, or we have a bug in bp API */
+ rc = -EINVAL;
+ break;
+ }
+ if (IS_ERR(bp)) {
+ rc = PTR_ERR(bp);
+ bp = NULL;
+ break;
+ }
+ thread->ptrace_bps[i] = bp;
}
/*
* Make a second pass to free the remaining unused breakpoints
struct thread_struct *thread = &(tsk->thread);
unsigned long val = 0;
- if (n < HBP_NUM)
- val = thread->debugreg[n];
- else if (n == 6)
+ if (n < HBP_NUM) {
+ struct perf_event *bp;
+ bp = thread->ptrace_bps[n];
+ if (!bp)
+ return 0;
+ val = bp->hw.info.address;
+ } else if (n == 6) {
val = thread->debugreg6;
- else if (n == 7)
- val = thread->debugreg7;
+ } else if (n == 7) {
+ val = ptrace_get_dr7(thread->ptrace_bps);
+ }
return val;
}
+static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
+ unsigned long addr)
+{
+ struct perf_event *bp;
+ struct thread_struct *t = &tsk->thread;
+
+ if (!t->ptrace_bps[nr]) {
+ /*
+ * Put stub len and type to register (reserve) an inactive but
+ * correct bp
+ */
+ bp = register_user_hw_breakpoint(addr, HW_BREAKPOINT_LEN_1,
+ HW_BREAKPOINT_W,
+ ptrace_triggered, tsk,
+ false);
+ } else {
+ bp = t->ptrace_bps[nr];
+ t->ptrace_bps[nr] = NULL;
+ bp = modify_user_hw_breakpoint(bp, addr, bp->attr.bp_len,
+ bp->attr.bp_type,
+ bp->callback,
+ tsk,
+ bp->attr.disabled);
+ }
+
+ if (!bp)
+ return -EIO;
+ /*
+ * CHECKME: the previous code returned -EIO if the addr wasn't a
+ * valid task virtual addr. The new one will return -EINVAL in this
+ * case.
+ * -EINVAL may be what we want for in-kernel breakpoints users, but
+ * -EIO looks better for ptrace, since we refuse a register writing
+ * for the user. And anyway this is the previous behaviour.
+ */
+ if (IS_ERR(bp))
+ return PTR_ERR(bp);
+
+ t->ptrace_bps[nr] = bp;
+
+ return 0;
+}
+
/*
* Handle PTRACE_POKEUSR calls for the debug register area.
*/
return -EIO;
if (n == 6) {
- tsk->thread.debugreg6 = val;
+ thread->debugreg6 = val;
goto ret_path;
}
if (n < HBP_NUM) {
- if (thread->hbp[n]) {
- if (arch_check_va_in_userspace(val,
- thread->hbp[n]->info.len) == 0) {
- rc = -EIO;
- goto ret_path;
- }
- thread->hbp[n]->info.address = val;
- }
- thread->debugreg[n] = val;
+ rc = ptrace_set_breakpoint_addr(tsk, n, val);
+ if (rc)
+ return rc;
}
/* All that's left is DR7 */
if (n == 7)
#include <asm/apic.h>
#include <asm/setup.h>
#include <asm/uv/uv.h>
-#include <asm/debugreg.h>
#include <linux/mc146818rtc.h>
#include <asm/smpboot_hooks.h>
x86_cpuinit.setup_percpu_clockev();
wmb();
- load_debug_registers();
cpu_idle();
}
remove_cpu_from_maps(cpu);
unlock_vector_lock();
fixup_irqs();
- hw_breakpoint_disable();
}
int native_cpu_disable(void)
#define CREATE_TRACE_POINTS
#include "trace.h"
+#include <asm/debugreg.h>
#include <asm/uaccess.h>
#include <asm/msr.h>
#include <asm/desc.h>
trace_kvm_entry(vcpu->vcpu_id);
kvm_x86_ops->run(vcpu, kvm_run);
- if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
- set_debugreg(current->thread.debugreg[0], 0);
- set_debugreg(current->thread.debugreg[1], 1);
- set_debugreg(current->thread.debugreg[2], 2);
- set_debugreg(current->thread.debugreg[3], 3);
- set_debugreg(current->thread.debugreg6, 6);
- set_debugreg(current->thread.debugreg7, 7);
- }
+ /*
+ * If the guest has used debug registers, at least dr7
+ * will be disabled while returning to the host.
+ * If we don't have active breakpoints in the host, we don't
+ * care about the messed up debug address registers. But if
+ * we have some of them active, restore the old state.
+ */
+ if (__get_cpu_var(dr7) & DR_GLOBAL_ENABLE_MASK)
+ hw_breakpoint_restore();
set_bit(KVM_REQ_KICK, &vcpu->requests);
local_irq_enable();
ctxt->cr4 = read_cr4();
ctxt->cr8 = read_cr8();
#endif
- hw_breakpoint_disable();
}
/* Needed by apm.c */
#endif
load_TR_desc(); /* This does ltr */
load_LDT(¤t->active_mm->context); /* This does lldt */
-
- /*
- * Now maybe reload the debug registers
- */
- load_debug_registers();
}
/**
#ifndef _LINUX_HW_BREAKPOINT_H
#define _LINUX_HW_BREAKPOINT_H
+#include <linux/perf_event.h>
-#ifdef __KERNEL__
-#include <linux/list.h>
-#include <linux/types.h>
-#include <linux/kallsyms.h>
-
-/**
- * struct hw_breakpoint - unified kernel/user-space hardware breakpoint
- * @triggered: callback invoked after target address access
- * @info: arch-specific breakpoint info (address, length, and type)
- *
- * %hw_breakpoint structures are the kernel's way of representing
- * hardware breakpoints. These are data breakpoints
- * (also known as "watchpoints", triggered on data access), and the breakpoint's
- * target address can be located in either kernel space or user space.
- *
- * The breakpoint's address, length, and type are highly
- * architecture-specific. The values are encoded in the @info field; you
- * specify them when registering the breakpoint. To examine the encoded
- * values use hw_breakpoint_get_{kaddress,uaddress,len,type}(), declared
- * below.
- *
- * The address is specified as a regular kernel pointer (for kernel-space
- * breakponts) or as an %__user pointer (for user-space breakpoints).
- * With register_user_hw_breakpoint(), the address must refer to a
- * location in user space. The breakpoint will be active only while the
- * requested task is running. Conversely with
- * register_kernel_hw_breakpoint(), the address must refer to a location
- * in kernel space, and the breakpoint will be active on all CPUs
- * regardless of the current task.
- *
- * The length is the breakpoint's extent in bytes, which is subject to
- * certain limitations. include/asm/hw_breakpoint.h contains macros
- * defining the available lengths for a specific architecture. Note that
- * the address's alignment must match the length. The breakpoint will
- * catch accesses to any byte in the range from address to address +
- * (length - 1).
- *
- * The breakpoint's type indicates the sort of access that will cause it
- * to trigger. Possible values may include:
- *
- * %HW_BREAKPOINT_RW (triggered on read or write access),
- * %HW_BREAKPOINT_WRITE (triggered on write access), and
- * %HW_BREAKPOINT_READ (triggered on read access).
- *
- * Appropriate macros are defined in include/asm/hw_breakpoint.h; not all
- * possibilities are available on all architectures. Execute breakpoints
- * must have length equal to the special value %HW_BREAKPOINT_LEN_EXECUTE.
- *
- * When a breakpoint gets hit, the @triggered callback is
- * invoked in_interrupt with a pointer to the %hw_breakpoint structure and the
- * processor registers.
- * Data breakpoints occur after the memory access has taken place.
- * Breakpoints are disabled during execution @triggered, to avoid
- * recursive traps and allow unhindered access to breakpointed memory.
- *
- * This sample code sets a breakpoint on pid_max and registers a callback
- * function for writes to that variable. Note that it is not portable
- * as written, because not all architectures support HW_BREAKPOINT_LEN_4.
- *
- * ----------------------------------------------------------------------
- *
- * #include <asm/hw_breakpoint.h>
- *
- * struct hw_breakpoint my_bp;
- *
- * static void my_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
- * {
- * printk(KERN_DEBUG "Inside triggered routine of breakpoint exception\n");
- * dump_stack();
- * .......<more debugging output>........
- * }
- *
- * static struct hw_breakpoint my_bp;
- *
- * static int init_module(void)
- * {
- * ..........<do anything>............
- * my_bp.info.type = HW_BREAKPOINT_WRITE;
- * my_bp.info.len = HW_BREAKPOINT_LEN_4;
- *
- * my_bp.installed = (void *)my_bp_installed;
- *
- * rc = register_kernel_hw_breakpoint(&my_bp);
- * ..........<do anything>............
- * }
- *
- * static void cleanup_module(void)
- * {
- * ..........<do anything>............
- * unregister_kernel_hw_breakpoint(&my_bp);
- * ..........<do anything>............
- * }
- *
- * ----------------------------------------------------------------------
- */
-struct hw_breakpoint {
- void (*triggered)(struct hw_breakpoint *, struct pt_regs *);
- struct arch_hw_breakpoint info;
+enum {
+ HW_BREAKPOINT_LEN_1 = 1,
+ HW_BREAKPOINT_LEN_2 = 2,
+ HW_BREAKPOINT_LEN_4 = 4,
+ HW_BREAKPOINT_LEN_8 = 8,
};
-/*
- * len and type values are defined in include/asm/hw_breakpoint.h.
- * Available values vary according to the architecture. On i386 the
- * possibilities are:
- *
- * HW_BREAKPOINT_LEN_1
- * HW_BREAKPOINT_LEN_2
- * HW_BREAKPOINT_LEN_4
- * HW_BREAKPOINT_RW
- * HW_BREAKPOINT_READ
- *
- * On other architectures HW_BREAKPOINT_LEN_8 may be available, and the
- * 1-, 2-, and 4-byte lengths may be unavailable. There also may be
- * HW_BREAKPOINT_WRITE. You can use #ifdef to check at compile time.
- */
+enum {
+ HW_BREAKPOINT_R = 1,
+ HW_BREAKPOINT_W = 2,
+ HW_BREAKPOINT_X = 4,
+};
+
+static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
+{
+ return &bp->hw.info;
+}
+
+static inline unsigned long hw_breakpoint_addr(struct perf_event *bp)
+{
+ return bp->attr.bp_addr;
+}
+
+static inline int hw_breakpoint_type(struct perf_event *bp)
+{
+ return bp->attr.bp_type;
+}
+
+static inline int hw_breakpoint_len(struct perf_event *bp)
+{
+ return bp->attr.bp_len;
+}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern struct perf_event *
+register_user_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active);
+
+/* FIXME: only change from the attr, and don't unregister */
+extern struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp,
+ unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active);
-extern int register_user_hw_breakpoint(struct task_struct *tsk,
- struct hw_breakpoint *bp);
-extern int modify_user_hw_breakpoint(struct task_struct *tsk,
- struct hw_breakpoint *bp);
-extern void unregister_user_hw_breakpoint(struct task_struct *tsk,
- struct hw_breakpoint *bp);
/*
* Kernel breakpoints are not associated with any particular thread.
*/
-extern int register_kernel_hw_breakpoint(struct hw_breakpoint *bp);
-extern void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+extern struct perf_event *
+register_wide_hw_breakpoint_cpu(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ int cpu,
+ bool active);
+
+extern struct perf_event **
+register_wide_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ bool active);
+
+extern int register_perf_hw_breakpoint(struct perf_event *bp);
+extern int __register_perf_hw_breakpoint(struct perf_event *bp);
+extern void unregister_hw_breakpoint(struct perf_event *bp);
+extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
+
+extern int reserve_bp_slot(struct perf_event *bp);
+extern void release_bp_slot(struct perf_event *bp);
+
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+
+static inline struct perf_event *
+register_user_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active) { return NULL; }
+static inline struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp,
+ unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active) { return NULL; }
+static inline struct perf_event *
+register_wide_hw_breakpoint_cpu(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ int cpu,
+ bool active) { return NULL; }
+static inline struct perf_event **
+register_wide_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ bool active) { return NULL; }
+static inline int
+register_perf_hw_breakpoint(struct perf_event *bp) { return -ENOSYS; }
+static inline int
+__register_perf_hw_breakpoint(struct perf_event *bp) { return -ENOSYS; }
+static inline void unregister_hw_breakpoint(struct perf_event *bp) { }
+static inline void
+unregister_wide_hw_breakpoint(struct perf_event **cpu_events) { }
+static inline int
+reserve_bp_slot(struct perf_event *bp) {return -ENOSYS; }
+static inline void release_bp_slot(struct perf_event *bp) { }
+
+static inline void flush_ptrace_hw_breakpoint(struct task_struct *tsk) { }
-extern unsigned int hbp_kernel_pos;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* __KERNEL__ */
-#endif /* _LINUX_HW_BREAKPOINT_H */
+#endif /* _LINUX_HW_BREAKPOINT_H */
#include <linux/ioctl.h>
#include <asm/byteorder.h>
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#include <asm/hw_breakpoint.h>
+#endif
+
/*
* User-space ABI bits:
*/
PERF_TYPE_TRACEPOINT = 2,
PERF_TYPE_HW_CACHE = 3,
PERF_TYPE_RAW = 4,
+ PERF_TYPE_BREAKPOINT = 5,
PERF_TYPE_MAX, /* non-ABI */
};
__u32 wakeup_events; /* wakeup every n events */
__u32 wakeup_watermark; /* bytes before wakeup */
};
+
+ union {
+ struct { /* Hardware breakpoint info */
+ __u64 bp_addr;
+ __u32 bp_type;
+ __u32 bp_len;
+ };
+ };
+
__u32 __reserved_2;
__u64 __reserved_3;
atomic64_t count;
struct hrtimer hrtimer;
};
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ union { /* breakpoint */
+ struct arch_hw_breakpoint info;
+ };
+#endif
};
atomic64_t prev_count;
u64 sample_period;
u64 tstamp_running;
u64 tstamp_stopped;
- struct perf_event_attr attr;
+ struct perf_event_attr attr;
struct hw_perf_event hw;
struct perf_event_context *ctx;
perf_callback_t callback;
+ perf_callback_t event_callback;
+
#endif /* CONFIG_PERF_EVENTS */
};
extern void perf_event_init(void);
extern void perf_tp_event(int event_id, u64 addr, u64 count,
void *record, int entry_size);
+extern void perf_bp_event(struct perf_event *event, void *data);
#ifndef perf_misc_flags
#define perf_misc_flags(regs) (user_mode(regs) ? PERF_RECORD_MISC_USER : \
static inline void
perf_sw_event(u32 event_id, u64 nr, int nmi,
struct pt_regs *regs, u64 addr) { }
+static inline void
+perf_bp_event(struct perf_event *event, void *data) { }
static inline void perf_event_mmap(struct vm_area_struct *vma) { }
static inline void perf_event_comm(struct task_struct *tsk) { }
#include <linux/init_task.h>
#include <linux/perf_event.h>
#include <trace/events/sched.h>
+#include <linux/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
proc_exit_connector(tsk);
+ /*
+ * FIXME: do that only when needed, using sched_exit tracepoint
+ */
+ flush_ptrace_hw_breakpoint(tsk);
/*
* Flush inherited counters to the parent - before the parent
* gets woken up by child-exit notifications.
*
* Copyright (C) 2007 Alan Stern
* Copyright (C) IBM Corporation, 2009
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
*/
/*
#include <linux/init.h>
#include <linux/smp.h>
-#include <asm/hw_breakpoint.h>
+#include <linux/hw_breakpoint.h>
+
#include <asm/processor.h>
#ifdef CONFIG_X86
#include <asm/debugreg.h>
#endif
-/*
- * Spinlock that protects all (un)register operations over kernel/user-space
- * breakpoint requests
- */
-static DEFINE_SPINLOCK(hw_breakpoint_lock);
-
-/* Array of kernel-space breakpoint structures */
-struct hw_breakpoint *hbp_kernel[HBP_NUM];
-
-/*
- * Per-processor copy of hbp_kernel[]. Used only when hbp_kernel is being
- * modified but we need the older copy to handle any hbp exceptions. It will
- * sync with hbp_kernel[] value after updation is done through IPIs.
- */
-DEFINE_PER_CPU(struct hw_breakpoint*, this_hbp_kernel[HBP_NUM]);
-
-/*
- * Kernel breakpoints grow downwards, starting from HBP_NUM
- * 'hbp_kernel_pos' denotes lowest numbered breakpoint register occupied for
- * kernel-space request. We will initialise it here and not in an __init
- * routine because load_debug_registers(), which uses this variable can be
- * called very early during CPU initialisation.
- */
-unsigned int hbp_kernel_pos = HBP_NUM;
-/*
- * An array containing refcount of threads using a given bkpt register
- * Accesses are synchronised by acquiring hw_breakpoint_lock
- */
-unsigned int hbp_user_refcount[HBP_NUM];
+static atomic_t bp_slot;
-/*
- * Load the debug registers during startup of a CPU.
- */
-void load_debug_registers(void)
+int reserve_bp_slot(struct perf_event *bp)
{
- unsigned long flags;
- struct task_struct *tsk = current;
-
- spin_lock_bh(&hw_breakpoint_lock);
-
- /* Prevent IPIs for new kernel breakpoint updates */
- local_irq_save(flags);
- arch_update_kernel_hw_breakpoint(NULL);
- local_irq_restore(flags);
-
- if (test_tsk_thread_flag(tsk, TIF_DEBUG))
- arch_install_thread_hw_breakpoint(tsk);
-
- spin_unlock_bh(&hw_breakpoint_lock);
-}
+ if (atomic_inc_return(&bp_slot) == HBP_NUM) {
+ atomic_dec(&bp_slot);
-/*
- * Erase all the hardware breakpoint info associated with a thread.
- *
- * If tsk != current then tsk must not be usable (for example, a
- * child being cleaned up from a failed fork).
- */
-void flush_thread_hw_breakpoint(struct task_struct *tsk)
-{
- int i;
- struct thread_struct *thread = &(tsk->thread);
-
- spin_lock_bh(&hw_breakpoint_lock);
-
- /* The thread no longer has any breakpoints associated with it */
- clear_tsk_thread_flag(tsk, TIF_DEBUG);
- for (i = 0; i < HBP_NUM; i++) {
- if (thread->hbp[i]) {
- hbp_user_refcount[i]--;
- kfree(thread->hbp[i]);
- thread->hbp[i] = NULL;
- }
+ return -ENOSPC;
}
- arch_flush_thread_hw_breakpoint(tsk);
-
- /* Actually uninstall the breakpoints if necessary */
- if (tsk == current)
- arch_uninstall_thread_hw_breakpoint();
- spin_unlock_bh(&hw_breakpoint_lock);
+ return 0;
}
-/*
- * Copy the hardware breakpoint info from a thread to its cloned child.
- */
-int copy_thread_hw_breakpoint(struct task_struct *tsk,
- struct task_struct *child, unsigned long clone_flags)
+void release_bp_slot(struct perf_event *bp)
{
- /*
- * We will assume that breakpoint settings are not inherited
- * and the child starts out with no debug registers set.
- * But what about CLONE_PTRACE?
- */
- clear_tsk_thread_flag(child, TIF_DEBUG);
-
- /* We will call flush routine since the debugregs are not inherited */
- arch_flush_thread_hw_breakpoint(child);
-
- return 0;
+ atomic_dec(&bp_slot);
}
-static int __register_user_hw_breakpoint(int pos, struct task_struct *tsk,
- struct hw_breakpoint *bp)
+int __register_perf_hw_breakpoint(struct perf_event *bp)
{
- struct thread_struct *thread = &(tsk->thread);
- int rc;
+ int ret;
- /* Do not overcommit. Fail if kernel has used the hbp registers */
- if (pos >= hbp_kernel_pos)
- return -ENOSPC;
+ ret = reserve_bp_slot(bp);
+ if (ret)
+ return ret;
- rc = arch_validate_hwbkpt_settings(bp, tsk);
- if (rc)
- return rc;
+ if (!bp->attr.disabled)
+ ret = arch_validate_hwbkpt_settings(bp, bp->ctx->task);
- thread->hbp[pos] = bp;
- hbp_user_refcount[pos]++;
+ return ret;
+}
- arch_update_user_hw_breakpoint(pos, tsk);
- /*
- * Does it need to be installed right now?
- * Otherwise it will get installed the next time tsk runs
- */
- if (tsk == current)
- arch_install_thread_hw_breakpoint(tsk);
+int register_perf_hw_breakpoint(struct perf_event *bp)
+{
+ bp->callback = perf_bp_event;
- return rc;
+ return __register_perf_hw_breakpoint(bp);
}
/*
- * Modify the address of a hbp register already in use by the task
- * Do not invoke this in-lieu of a __unregister_user_hw_breakpoint()
+ * Register a breakpoint bound to a task and a given cpu.
+ * If cpu is -1, the breakpoint is active for the task in every cpu
+ * If the task is -1, the breakpoint is active for every tasks in the given
+ * cpu.
*/
-static int __modify_user_hw_breakpoint(int pos, struct task_struct *tsk,
- struct hw_breakpoint *bp)
+static struct perf_event *
+register_user_hw_breakpoint_cpu(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ pid_t pid,
+ int cpu,
+ bool active)
{
- struct thread_struct *thread = &(tsk->thread);
-
- if ((pos >= hbp_kernel_pos) || (arch_validate_hwbkpt_settings(bp, tsk)))
- return -EINVAL;
-
- if (thread->hbp[pos] == NULL)
- return -EINVAL;
-
- thread->hbp[pos] = bp;
+ struct perf_event_attr *attr;
+ struct perf_event *bp;
+
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ if (!attr)
+ return ERR_PTR(-ENOMEM);
+
+ attr->type = PERF_TYPE_BREAKPOINT;
+ attr->size = sizeof(*attr);
+ attr->bp_addr = addr;
+ attr->bp_len = len;
+ attr->bp_type = type;
/*
- * 'pos' must be that of a hbp register already used by 'tsk'
- * Otherwise arch_modify_user_hw_breakpoint() will fail
+ * Such breakpoints are used by debuggers to trigger signals when
+ * we hit the excepted memory op. We can't miss such events, they
+ * must be pinned.
*/
- arch_update_user_hw_breakpoint(pos, tsk);
+ attr->pinned = 1;
- if (tsk == current)
- arch_install_thread_hw_breakpoint(tsk);
+ if (!active)
+ attr->disabled = 1;
- return 0;
-}
-
-static void __unregister_user_hw_breakpoint(int pos, struct task_struct *tsk)
-{
- hbp_user_refcount[pos]--;
- tsk->thread.hbp[pos] = NULL;
+ bp = perf_event_create_kernel_counter(attr, cpu, pid, triggered);
+ kfree(attr);
- arch_update_user_hw_breakpoint(pos, tsk);
-
- if (tsk == current)
- arch_install_thread_hw_breakpoint(tsk);
+ return bp;
}
/**
* register_user_hw_breakpoint - register a hardware breakpoint for user space
+ * @addr: is the memory address that triggers the breakpoint
+ * @len: the length of the access to the memory (1 byte, 2 bytes etc...)
+ * @type: the type of the access to the memory (read/write/exec)
+ * @triggered: callback to trigger when we hit the breakpoint
* @tsk: pointer to 'task_struct' of the process to which the address belongs
- * @bp: the breakpoint structure to register
- *
- * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
- * @bp->triggered must be set properly before invocation
+ * @active: should we activate it while registering it
*
*/
-int register_user_hw_breakpoint(struct task_struct *tsk,
- struct hw_breakpoint *bp)
+struct perf_event *
+register_user_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active)
{
- struct thread_struct *thread = &(tsk->thread);
- int i, rc = -ENOSPC;
-
- spin_lock_bh(&hw_breakpoint_lock);
-
- for (i = 0; i < hbp_kernel_pos; i++) {
- if (!thread->hbp[i]) {
- rc = __register_user_hw_breakpoint(i, tsk, bp);
- break;
- }
- }
- if (!rc)
- set_tsk_thread_flag(tsk, TIF_DEBUG);
-
- spin_unlock_bh(&hw_breakpoint_lock);
- return rc;
+ return register_user_hw_breakpoint_cpu(addr, len, type, triggered,
+ tsk->pid, -1, active);
}
EXPORT_SYMBOL_GPL(register_user_hw_breakpoint);
/**
* modify_user_hw_breakpoint - modify a user-space hardware breakpoint
+ * @bp: the breakpoint structure to modify
+ * @addr: is the memory address that triggers the breakpoint
+ * @len: the length of the access to the memory (1 byte, 2 bytes etc...)
+ * @type: the type of the access to the memory (read/write/exec)
+ * @triggered: callback to trigger when we hit the breakpoint
* @tsk: pointer to 'task_struct' of the process to which the address belongs
- * @bp: the breakpoint structure to unregister
- *
+ * @active: should we activate it while registering it
*/
-int modify_user_hw_breakpoint(struct task_struct *tsk, struct hw_breakpoint *bp)
+struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp,
+ unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ struct task_struct *tsk,
+ bool active)
{
- struct thread_struct *thread = &(tsk->thread);
- int i, ret = -ENOENT;
+ /*
+ * FIXME: do it without unregistering
+ * - We don't want to lose our slot
+ * - If the new bp is incorrect, don't lose the older one
+ */
+ unregister_hw_breakpoint(bp);
- spin_lock_bh(&hw_breakpoint_lock);
- for (i = 0; i < hbp_kernel_pos; i++) {
- if (bp == thread->hbp[i]) {
- ret = __modify_user_hw_breakpoint(i, tsk, bp);
- break;
- }
- }
- spin_unlock_bh(&hw_breakpoint_lock);
- return ret;
+ return register_user_hw_breakpoint(addr, len, type, triggered,
+ tsk, active);
}
EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);
/**
- * unregister_user_hw_breakpoint - unregister a user-space hardware breakpoint
- * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ * unregister_hw_breakpoint - unregister a user-space hardware breakpoint
* @bp: the breakpoint structure to unregister
- *
*/
-void unregister_user_hw_breakpoint(struct task_struct *tsk,
- struct hw_breakpoint *bp)
+void unregister_hw_breakpoint(struct perf_event *bp)
{
- struct thread_struct *thread = &(tsk->thread);
- int i, pos = -1, hbp_counter = 0;
-
- spin_lock_bh(&hw_breakpoint_lock);
- for (i = 0; i < hbp_kernel_pos; i++) {
- if (thread->hbp[i])
- hbp_counter++;
- if (bp == thread->hbp[i])
- pos = i;
- }
- if (pos >= 0) {
- __unregister_user_hw_breakpoint(pos, tsk);
- hbp_counter--;
- }
- if (!hbp_counter)
- clear_tsk_thread_flag(tsk, TIF_DEBUG);
-
- spin_unlock_bh(&hw_breakpoint_lock);
+ if (!bp)
+ return;
+ perf_event_release_kernel(bp);
+}
+EXPORT_SYMBOL_GPL(unregister_hw_breakpoint);
+
+static struct perf_event *
+register_kernel_hw_breakpoint_cpu(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ int cpu,
+ bool active)
+{
+ return register_user_hw_breakpoint_cpu(addr, len, type, triggered,
+ -1, cpu, active);
}
-EXPORT_SYMBOL_GPL(unregister_user_hw_breakpoint);
/**
- * register_kernel_hw_breakpoint - register a hardware breakpoint for kernel space
- * @bp: the breakpoint structure to register
- *
- * @bp.info->name or @bp.info->address, @bp.info->len, @bp.info->type and
- * @bp->triggered must be set properly before invocation
+ * register_wide_hw_breakpoint - register a wide breakpoint in the kernel
+ * @addr: is the memory address that triggers the breakpoint
+ * @len: the length of the access to the memory (1 byte, 2 bytes etc...)
+ * @type: the type of the access to the memory (read/write/exec)
+ * @triggered: callback to trigger when we hit the breakpoint
+ * @active: should we activate it while registering it
*
+ * @return a set of per_cpu pointers to perf events
*/
-int register_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+struct perf_event **
+register_wide_hw_breakpoint(unsigned long addr,
+ int len,
+ int type,
+ perf_callback_t triggered,
+ bool active)
{
- int rc;
+ struct perf_event **cpu_events, **pevent, *bp;
+ long err;
+ int cpu;
+
+ cpu_events = alloc_percpu(typeof(*cpu_events));
+ if (!cpu_events)
+ return ERR_PTR(-ENOMEM);
- rc = arch_validate_hwbkpt_settings(bp, NULL);
- if (rc)
- return rc;
+ for_each_possible_cpu(cpu) {
+ pevent = per_cpu_ptr(cpu_events, cpu);
+ bp = register_kernel_hw_breakpoint_cpu(addr, len, type,
+ triggered, cpu, active);
- spin_lock_bh(&hw_breakpoint_lock);
+ *pevent = bp;
- rc = -ENOSPC;
- /* Check if we are over-committing */
- if ((hbp_kernel_pos > 0) && (!hbp_user_refcount[hbp_kernel_pos-1])) {
- hbp_kernel_pos--;
- hbp_kernel[hbp_kernel_pos] = bp;
- on_each_cpu(arch_update_kernel_hw_breakpoint, NULL, 1);
- rc = 0;
+ if (IS_ERR(bp) || !bp) {
+ err = PTR_ERR(bp);
+ goto fail;
+ }
}
- spin_unlock_bh(&hw_breakpoint_lock);
- return rc;
+ return cpu_events;
+
+fail:
+ for_each_possible_cpu(cpu) {
+ pevent = per_cpu_ptr(cpu_events, cpu);
+ if (IS_ERR(*pevent) || !*pevent)
+ break;
+ unregister_hw_breakpoint(*pevent);
+ }
+ free_percpu(cpu_events);
+ /* return the error if any */
+ return ERR_PTR(err);
}
-EXPORT_SYMBOL_GPL(register_kernel_hw_breakpoint);
/**
- * unregister_kernel_hw_breakpoint - unregister a HW breakpoint for kernel space
- * @bp: the breakpoint structure to unregister
- *
- * Uninstalls and unregisters @bp.
+ * unregister_wide_hw_breakpoint - unregister a wide breakpoint in the kernel
+ * @cpu_events: the per cpu set of events to unregister
*/
-void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+void unregister_wide_hw_breakpoint(struct perf_event **cpu_events)
{
- int i, j;
-
- spin_lock_bh(&hw_breakpoint_lock);
-
- /* Find the 'bp' in our list of breakpoints for kernel */
- for (i = hbp_kernel_pos; i < HBP_NUM; i++)
- if (bp == hbp_kernel[i])
- break;
+ int cpu;
+ struct perf_event **pevent;
- /* Check if we did not find a match for 'bp'. If so return early */
- if (i == HBP_NUM) {
- spin_unlock_bh(&hw_breakpoint_lock);
- return;
+ for_each_possible_cpu(cpu) {
+ pevent = per_cpu_ptr(cpu_events, cpu);
+ unregister_hw_breakpoint(*pevent);
}
-
- /*
- * We'll shift the breakpoints one-level above to compact if
- * unregistration creates a hole
- */
- for (j = i; j > hbp_kernel_pos; j--)
- hbp_kernel[j] = hbp_kernel[j-1];
-
- hbp_kernel[hbp_kernel_pos] = NULL;
- on_each_cpu(arch_update_kernel_hw_breakpoint, NULL, 1);
- hbp_kernel_pos++;
-
- spin_unlock_bh(&hw_breakpoint_lock);
+ free_percpu(cpu_events);
}
-EXPORT_SYMBOL_GPL(unregister_kernel_hw_breakpoint);
+
static struct notifier_block hw_breakpoint_exceptions_nb = {
.notifier_call = hw_breakpoint_exceptions_notify,
{
return register_die_notifier(&hw_breakpoint_exceptions_nb);
}
-
core_initcall(init_hw_breakpoint);
+
+
+struct pmu perf_ops_bp = {
+ .enable = arch_install_hw_breakpoint,
+ .disable = arch_uninstall_hw_breakpoint,
+ .read = hw_breakpoint_pmu_read,
+ .unthrottle = hw_breakpoint_pmu_unthrottle
+};
#include <linux/kernel_stat.h>
#include <linux/perf_event.h>
#include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
#include <asm/irq_regs.h>
#endif /* CONFIG_EVENT_PROFILE */
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+static void bp_perf_event_destroy(struct perf_event *event)
+{
+ release_bp_slot(event);
+}
+
+static const struct pmu *bp_perf_event_init(struct perf_event *bp)
+{
+ int err;
+ /*
+ * The breakpoint is already filled if we haven't created the counter
+ * through perf syscall
+ * FIXME: manage to get trigerred to NULL if it comes from syscalls
+ */
+ if (!bp->callback)
+ err = register_perf_hw_breakpoint(bp);
+ else
+ err = __register_perf_hw_breakpoint(bp);
+ if (err)
+ return ERR_PTR(err);
+
+ bp->destroy = bp_perf_event_destroy;
+
+ return &perf_ops_bp;
+}
+
+void perf_bp_event(struct perf_event *bp, void *regs)
+{
+ /* TODO */
+}
+#else
+static void bp_perf_event_destroy(struct perf_event *event)
+{
+}
+
+static const struct pmu *bp_perf_event_init(struct perf_event *bp)
+{
+ return NULL;
+}
+
+void perf_bp_event(struct perf_event *bp, void *regs)
+{
+}
+#endif
+
atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
static void sw_perf_event_destroy(struct perf_event *event)
pmu = tp_perf_event_init(event);
break;
+ case PERF_TYPE_BREAKPOINT:
+ pmu = bp_perf_event_init(event);
+ break;
+
+
default:
break;
}
ctx = find_get_context(pid, cpu);
if (IS_ERR(ctx))
- return NULL ;
+ return NULL;
event = perf_event_alloc(attr, cpu, ctx, NULL,
NULL, callback, GFP_KERNEL);
#include <linux/ftrace.h>
#include <trace/boot.h>
#include <linux/kmemtrace.h>
+#include <linux/hw_breakpoint.h>
#include <linux/trace_seq.h>
#include <linux/ftrace_event.h>
-#ifdef CONFIG_KSYM_TRACER
-#include <asm/hw_breakpoint.h>
-#endif
-
enum trace_type {
__TRACE_FIRST_TYPE = 0,
F_STRUCT(
__field( unsigned long, ip )
__field( unsigned char, type )
- __array( char , ksym_name, KSYM_NAME_LEN )
__array( char , cmd, TASK_COMM_LEN )
+ __field( unsigned long, addr )
),
- F_printk("ip: %pF type: %d ksym_name: %s cmd: %s",
+ F_printk("ip: %pF type: %d ksym_name: %pS cmd: %s",
(void *)__entry->ip, (unsigned int)__entry->type,
- __entry->ksym_name, __entry->cmd)
+ (void *)__entry->addr, __entry->cmd)
);
#include "trace_stat.h"
#include "trace.h"
-/* For now, let us restrict the no. of symbols traced simultaneously to number
+#include <linux/hw_breakpoint.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * For now, let us restrict the no. of symbols traced simultaneously to number
* of available hardware breakpoint registers.
*/
#define KSYM_TRACER_MAX HBP_NUM
#define KSYM_TRACER_OP_LEN 3 /* rw- */
struct trace_ksym {
- struct hw_breakpoint *ksym_hbp;
+ struct perf_event **ksym_hbp;
unsigned long ksym_addr;
+ int type;
+ int len;
#ifdef CONFIG_PROFILE_KSYM_TRACER
unsigned long counter;
#endif
}
#endif /* CONFIG_PROFILE_KSYM_TRACER */
-void ksym_hbp_handler(struct hw_breakpoint *hbp, struct pt_regs *regs)
+void ksym_hbp_handler(struct perf_event *hbp, void *data)
{
struct ring_buffer_event *event;
struct ksym_trace_entry *entry;
+ struct pt_regs *regs = data;
struct ring_buffer *buffer;
int pc;
entry = ring_buffer_event_data(event);
entry->ip = instruction_pointer(regs);
- entry->type = hbp->info.type;
- strlcpy(entry->ksym_name, hbp->info.name, KSYM_SYMBOL_LEN);
+ entry->type = hw_breakpoint_type(hbp);
+ entry->addr = hw_breakpoint_addr(hbp);
strlcpy(entry->cmd, current->comm, TASK_COMM_LEN);
#ifdef CONFIG_PROFILE_KSYM_TRACER
- ksym_collect_stats(hbp->info.address);
+ ksym_collect_stats(hw_breakpoint_addr(hbp));
#endif /* CONFIG_PROFILE_KSYM_TRACER */
trace_buffer_unlock_commit(buffer, event, 0, pc);
int access = 0;
if (str[0] == 'r')
- access += 4;
- else if (str[0] != '-')
- return -EINVAL;
+ access |= HW_BREAKPOINT_R;
if (str[1] == 'w')
- access += 2;
- else if (str[1] != '-')
- return -EINVAL;
+ access |= HW_BREAKPOINT_W;
- if (str[2] != '-')
- return -EINVAL;
+ if (str[2] == 'x')
+ access |= HW_BREAKPOINT_X;
switch (access) {
- case 6:
- access = HW_BREAKPOINT_RW;
- break;
- case 4:
- access = -EINVAL;
- break;
- case 2:
- access = HW_BREAKPOINT_WRITE;
- break;
+ case HW_BREAKPOINT_W:
+ case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+ return access;
+ default:
+ return -EINVAL;
}
-
- return access;
}
/*
if (!entry)
return -ENOMEM;
- entry->ksym_hbp = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL);
- if (!entry->ksym_hbp)
- goto err;
-
- entry->ksym_hbp->info.name = kstrdup(ksymname, GFP_KERNEL);
- if (!entry->ksym_hbp->info.name)
- goto err;
-
- entry->ksym_hbp->info.type = op;
- entry->ksym_addr = entry->ksym_hbp->info.address = addr;
-#ifdef CONFIG_X86
- entry->ksym_hbp->info.len = HW_BREAKPOINT_LEN_4;
-#endif
- entry->ksym_hbp->triggered = (void *)ksym_hbp_handler;
+ entry->type = op;
+ entry->ksym_addr = addr;
+ entry->len = HW_BREAKPOINT_LEN_4;
+
+ ret = -EAGAIN;
+ entry->ksym_hbp = register_wide_hw_breakpoint(entry->ksym_addr,
+ entry->len, entry->type,
+ ksym_hbp_handler, true);
+ if (IS_ERR(entry->ksym_hbp)) {
+ entry->ksym_hbp = NULL;
+ ret = PTR_ERR(entry->ksym_hbp);
+ }
- ret = register_kernel_hw_breakpoint(entry->ksym_hbp);
- if (ret < 0) {
+ if (!entry->ksym_hbp) {
printk(KERN_INFO "ksym_tracer request failed. Try again"
" later!!\n");
- ret = -EAGAIN;
goto err;
}
+
hlist_add_head_rcu(&(entry->ksym_hlist), &ksym_filter_head);
ksym_filter_entry_count++;
+
return 0;
+
err:
- if (entry->ksym_hbp)
- kfree(entry->ksym_hbp->info.name);
- kfree(entry->ksym_hbp);
kfree(entry);
+
return ret;
}
mutex_lock(&ksym_tracer_mutex);
hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
- ret = trace_seq_printf(s, "%s:", entry->ksym_hbp->info.name);
- if (entry->ksym_hbp->info.type == HW_BREAKPOINT_WRITE)
+ ret = trace_seq_printf(s, "%pS:", (void *)entry->ksym_addr);
+ if (entry->type == HW_BREAKPOINT_W)
ret = trace_seq_puts(s, "-w-\n");
- else if (entry->ksym_hbp->info.type == HW_BREAKPOINT_RW)
+ else if (entry->type == (HW_BREAKPOINT_W | HW_BREAKPOINT_R))
ret = trace_seq_puts(s, "rw-\n");
WARN_ON_ONCE(!ret);
}
mutex_lock(&ksym_tracer_mutex);
hlist_for_each_entry_safe(entry, node, node1, &ksym_filter_head,
ksym_hlist) {
- unregister_kernel_hw_breakpoint(entry->ksym_hbp);
+ unregister_wide_hw_breakpoint(entry->ksym_hbp);
ksym_filter_entry_count--;
hlist_del_rcu(&(entry->ksym_hlist));
synchronize_rcu();
- kfree(entry->ksym_hbp->info.name);
- kfree(entry->ksym_hbp);
kfree(entry);
}
mutex_unlock(&ksym_tracer_mutex);
hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
if (entry->ksym_addr == ksym_addr) {
/* Check for malformed request: (6) */
- if (entry->ksym_hbp->info.type != op)
+ if (entry->type != op)
changed = 1;
else
goto out;
}
}
if (changed) {
- unregister_kernel_hw_breakpoint(entry->ksym_hbp);
- entry->ksym_hbp->info.type = op;
+ unregister_wide_hw_breakpoint(entry->ksym_hbp);
+ entry->type = op;
if (op > 0) {
- ret = register_kernel_hw_breakpoint(entry->ksym_hbp);
- if (ret == 0)
+ entry->ksym_hbp =
+ register_wide_hw_breakpoint(entry->ksym_addr,
+ entry->len, entry->type,
+ ksym_hbp_handler, true);
+ if (IS_ERR(entry->ksym_hbp))
+ entry->ksym_hbp = NULL;
+ if (!entry->ksym_hbp)
goto out;
}
ksym_filter_entry_count--;
hlist_del_rcu(&(entry->ksym_hlist));
synchronize_rcu();
- kfree(entry->ksym_hbp->info.name);
- kfree(entry->ksym_hbp);
kfree(entry);
ret = 0;
goto out;
trace_assign_type(field, entry);
- ret = trace_seq_printf(s, "%11s-%-5d [%03d] %-30s ", field->cmd,
- entry->pid, iter->cpu, field->ksym_name);
+ ret = trace_seq_printf(s, "%11s-%-5d [%03d] %pS", field->cmd,
+ entry->pid, iter->cpu, (char *)field->addr);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
switch (field->type) {
- case HW_BREAKPOINT_WRITE:
+ case HW_BREAKPOINT_W:
ret = trace_seq_printf(s, " W ");
break;
- case HW_BREAKPOINT_RW:
+ case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
ret = trace_seq_printf(s, " RW ");
break;
default:
entry = hlist_entry(stat, struct trace_ksym, ksym_hlist);
- if (entry->ksym_hbp)
- access_type = entry->ksym_hbp->info.type;
+ access_type = entry->type;
switch (access_type) {
- case HW_BREAKPOINT_WRITE:
+ case HW_BREAKPOINT_W:
seq_puts(m, " W ");
break;
- case HW_BREAKPOINT_RW:
+ case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
seq_puts(m, " RW ");
break;
default:
ksym_selftest_dummy = 0;
/* Register the read-write tracing request */
- ret = process_new_ksym_entry(KSYM_SELFTEST_ENTRY, HW_BREAKPOINT_RW,
+ ret = process_new_ksym_entry(KSYM_SELFTEST_ENTRY,
+ HW_BREAKPOINT_R | HW_BREAKPOINT_W,
(unsigned long)(&ksym_selftest_dummy));
if (ret < 0) {
projects / linux-beck.git / commitdiff