#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/bitops.h>
+#include "amba-clcd-versatile.h"
static struct clcd_panel vga = {
.mode = {
dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
fb->fb.fix.smem_start);
}
+
+#ifdef CONFIG_OF
+
+static struct regmap *versatile_syscon_map;
+static struct regmap *versatile_ib2_map;
+
+/*
+ * We detect the different syscon types from the compatible strings.
+ */
+enum versatile_clcd {
+ INTEGRATOR_CLCD_CM,
+ VERSATILE_CLCD,
+ REALVIEW_CLCD_EB,
+ REALVIEW_CLCD_PB1176,
+ REALVIEW_CLCD_PB11MP,
+ REALVIEW_CLCD_PBA8,
+ REALVIEW_CLCD_PBX,
+};
+
+static const struct of_device_id versatile_clcd_of_match[] = {
+ {
+ .compatible = "arm,core-module-integrator",
+ .data = (void *)INTEGRATOR_CLCD_CM,
+ },
+ {
+ .compatible = "arm,versatile-sysreg",
+ .data = (void *)VERSATILE_CLCD,
+ },
+ {
+ .compatible = "arm,realview-eb-syscon",
+ .data = (void *)REALVIEW_CLCD_EB,
+ },
+ {
+ .compatible = "arm,realview-pb1176-syscon",
+ .data = (void *)REALVIEW_CLCD_PB1176,
+ },
+ {
+ .compatible = "arm,realview-pb11mp-syscon",
+ .data = (void *)REALVIEW_CLCD_PB11MP,
+ },
+ {
+ .compatible = "arm,realview-pba8-syscon",
+ .data = (void *)REALVIEW_CLCD_PBA8,
+ },
+ {
+ .compatible = "arm,realview-pbx-syscon",
+ .data = (void *)REALVIEW_CLCD_PBX,
+ },
+ {},
+};
+
+/*
+ * Core module CLCD control on the Integrator/CP, bits
+ * 8 thru 19 of the CM_CONTROL register controls a bunch
+ * of CLCD settings.
+ */
+#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C
+#define INTEGRATOR_CLCD_LCDBIASEN BIT(8)
+#define INTEGRATOR_CLCD_LCDBIASUP BIT(9)
+#define INTEGRATOR_CLCD_LCDBIASDN BIT(10)
+/* Bits 11,12,13 controls the LCD type */
+#define INTEGRATOR_CLCD_LCDMUX_MASK (BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCDMUX_LCD24 BIT(11)
+#define INTEGRATOR_CLCD_LCDMUX_VGA565 BIT(12)
+#define INTEGRATOR_CLCD_LCDMUX_SHARP (BIT(11)|BIT(12))
+#define INTEGRATOR_CLCD_LCDMUX_VGA555 BIT(13)
+#define INTEGRATOR_CLCD_LCDMUX_VGA24 (BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCD0_EN BIT(14)
+#define INTEGRATOR_CLCD_LCD1_EN BIT(15)
+/* R/L flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC1 BIT(16)
+/* U/D flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC2 BIT(17)
+/* No connection on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC BIT(18)
+/* 0 = 24bit VGA, 1 = 18bit VGA */
+#define INTEGRATOR_CLCD_LCD_N24BITEN BIT(19)
+
+#define INTEGRATOR_CLCD_MASK (INTEGRATOR_CLCD_LCDMUX_MASK | \
+ INTEGRATOR_CLCD_LCD0_EN | \
+ INTEGRATOR_CLCD_LCD1_EN | \
+ INTEGRATOR_CLCD_LCD_STATIC1 | \
+ INTEGRATOR_CLCD_LCD_STATIC2 | \
+ INTEGRATOR_CLCD_LCD_STATIC | \
+ INTEGRATOR_CLCD_LCD_N24BITEN)
+
+static void integrator_clcd_enable(struct clcd_fb *fb)
+{
+ struct fb_var_screeninfo *var = &fb->fb.var;
+ u32 val;
+
+ dev_info(&fb->dev->dev, "enable Integrator CLCD connectors\n");
+
+ val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
+ INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
+ if (var->bits_per_pixel <= 8 ||
+ (var->bits_per_pixel == 16 && var->green.length == 5))
+ /* Pseudocolor, RGB555, BGR555 */
+ val |= INTEGRATOR_CLCD_LCDMUX_VGA555;
+ else if (fb->fb.var.bits_per_pixel <= 16)
+ /* truecolor RGB565 */
+ val |= INTEGRATOR_CLCD_LCDMUX_VGA565;
+ else
+ val = 0; /* no idea for this, don't trust the docs */
+
+ regmap_update_bits(versatile_syscon_map,
+ INTEGRATOR_HDR_CTRL_OFFSET,
+ 0,
+ INTEGRATOR_CLCD_MASK);
+}
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD 0x50
+#define SYS_CLCD_MODE_MASK (BIT(0)|BIT(1))
+#define SYS_CLCD_MODE_888 0
+#define SYS_CLCD_MODE_5551 BIT(0)
+#define SYS_CLCD_MODE_565_R_LSB BIT(1)
+#define SYS_CLCD_MODE_565_B_LSB (BIT(0)|BIT(1))
+#define SYS_CLCD_CONNECTOR_MASK (BIT(2)|BIT(3)|BIT(4)|BIT(5))
+#define SYS_CLCD_NLCDIOON BIT(2)
+#define SYS_CLCD_VDDPOSSWITCH BIT(3)
+#define SYS_CLCD_PWR3V5SWITCH BIT(4)
+#define SYS_CLCD_VDDNEGSWITCH BIT(5)
+#define SYS_CLCD_TSNSS BIT(6) /* touchscreen enable */
+#define SYS_CLCD_SSPEXP BIT(7) /* SSP expansion enable */
+
+/* The Versatile can detect the connected panel type */
+#define SYS_CLCD_CLCDID_MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12))
+#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
+#define SYS_CLCD_ID_SHARP_8_4 (0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
+#define SYS_CLCD_ID_VGA (0x1f << 8)
+
+#define SYS_CLCD_TSNDAV BIT(13) /* data ready from TS */
+
+/* IB2 control register for the Versatile daughterboard */
+#define IB2_CTRL 0x00
+#define IB2_CTRL_LCD_SD BIT(1) /* 1 = shut down LCD */
+#define IB2_CTRL_LCD_BL_ON BIT(0)
+#define IB2_CTRL_LCD_MASK (BIT(0)|BIT(1))
+
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+ dev_info(&fb->dev->dev, "disable Versatile CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ 0);
+
+ /* If we're on an IB2 daughterboard, turn off display */
+ if (versatile_ib2_map) {
+ dev_info(&fb->dev->dev, "disable IB2 display\n");
+ regmap_update_bits(versatile_ib2_map,
+ IB2_CTRL,
+ IB2_CTRL_LCD_MASK,
+ IB2_CTRL_LCD_SD);
+ }
+}
+
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+ struct fb_var_screeninfo *var = &fb->fb.var;
+ u32 val = 0;
+
+ dev_info(&fb->dev->dev, "enable Versatile CLCD connectors\n");
+ switch (var->green.length) {
+ case 5:
+ val |= SYS_CLCD_MODE_5551;
+ break;
+ case 6:
+ if (var->red.offset == 0)
+ val |= SYS_CLCD_MODE_565_R_LSB;
+ else
+ val |= SYS_CLCD_MODE_565_B_LSB;
+ break;
+ case 8:
+ val |= SYS_CLCD_MODE_888;
+ break;
+ }
+
+ /* Set up the MUX */
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_MODE_MASK,
+ val);
+
+ /* Then enable the display */
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+
+ /* If we're on an IB2 daughterboard, turn on display */
+ if (versatile_ib2_map) {
+ dev_info(&fb->dev->dev, "enable IB2 display\n");
+ regmap_update_bits(versatile_ib2_map,
+ IB2_CTRL,
+ IB2_CTRL_LCD_MASK,
+ IB2_CTRL_LCD_BL_ON);
+ }
+}
+
+static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+ clcdfb_decode(fb, regs);
+
+ /* Always clear BGR for RGB565: we do the routing externally */
+ if (fb->fb.var.green.length == 6)
+ regs->cntl &= ~CNTL_BGR;
+}
+
+static void realview_clcd_disable(struct clcd_fb *fb)
+{
+ dev_info(&fb->dev->dev, "disable RealView CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ 0);
+}
+
+static void realview_clcd_enable(struct clcd_fb *fb)
+{
+ dev_info(&fb->dev->dev, "enable RealView CLCD connectors\n");
+ regmap_update_bits(versatile_syscon_map,
+ SYS_CLCD,
+ SYS_CLCD_CONNECTOR_MASK,
+ SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+struct versatile_panel {
+ u32 id;
+ char *compatible;
+ bool ib2;
+};
+
+static const struct versatile_panel versatile_panels[] = {
+ {
+ .id = SYS_CLCD_ID_VGA,
+ .compatible = "VGA",
+ },
+ {
+ .id = SYS_CLCD_ID_SANYO_3_8,
+ .compatible = "sanyo,tm38qv67a02a",
+ },
+ {
+ .id = SYS_CLCD_ID_SHARP_8_4,
+ .compatible = "sharp,lq084v1dg21",
+ },
+ {
+ .id = SYS_CLCD_ID_EPSON_2_2,
+ .compatible = "epson,l2f50113t00",
+ },
+ {
+ .id = SYS_CLCD_ID_SANYO_2_5,
+ .compatible = "sanyo,alr252rgt",
+ .ib2 = true,
+ },
+};
+
+static void versatile_panel_probe(struct device *dev,
+ struct device_node *endpoint)
+{
+ struct versatile_panel const *vpanel = NULL;
+ struct device_node *panel = NULL;
+ u32 val;
+ int ret;
+ int i;
+
+ /*
+ * The Versatile CLCD has a panel auto-detection mechanism.
+ * We use this and look for the compatible panel in the
+ * device tree.
+ */
+ ret = regmap_read(versatile_syscon_map, SYS_CLCD, &val);
+ if (ret) {
+ dev_err(dev, "cannot read CLCD syscon register\n");
+ return;
+ }
+ val &= SYS_CLCD_CLCDID_MASK;
+
+ /* First find corresponding panel information */
+ for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) {
+ vpanel = &versatile_panels[i];
+
+ if (val == vpanel->id) {
+ dev_err(dev, "autodetected panel \"%s\"\n",
+ vpanel->compatible);
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(versatile_panels)) {
+ dev_err(dev, "could not auto-detect panel\n");
+ return;
+ }
+
+ panel = of_graph_get_remote_port_parent(endpoint);
+ if (!panel) {
+ dev_err(dev, "could not locate panel in DT\n");
+ return;
+ }
+ if (!of_device_is_compatible(panel, vpanel->compatible))
+ dev_err(dev, "panel in DT is not compatible with the "
+ "auto-detected panel, continuing anyway\n");
+
+ /*
+ * If we have a Sanyo 2.5" port
+ * that we're running on an IB2 and proceed to look for the
+ * IB2 syscon regmap.
+ */
+ if (!vpanel->ib2)
+ return;
+
+ versatile_ib2_map = syscon_regmap_lookup_by_compatible(
+ "arm,versatile-ib2-syscon");
+ if (IS_ERR(versatile_ib2_map)) {
+ dev_err(dev, "could not locate IB2 control register\n");
+ versatile_ib2_map = NULL;
+ return;
+ }
+}
+
+int versatile_clcd_init_panel(struct clcd_fb *fb,
+ struct device_node *endpoint)
+{
+ const struct of_device_id *clcd_id;
+ enum versatile_clcd versatile_clcd_type;
+ struct device_node *np;
+ struct regmap *map;
+ struct device *dev = &fb->dev->dev;
+
+ np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
+ &clcd_id);
+ if (!np) {
+ dev_err(dev, "no Versatile syscon node\n");
+ return -ENODEV;
+ }
+ versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
+
+ map = syscon_node_to_regmap(np);
+ if (!map) {
+ dev_err(dev, "no Versatile syscon regmap\n");
+ return -ENODEV;
+ }
+
+ switch (versatile_clcd_type) {
+ case INTEGRATOR_CLCD_CM:
+ versatile_syscon_map = map;
+ fb->board->enable = integrator_clcd_enable;
+ /* Override the caps, we have only these */
+ fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 |
+ CLCD_CAP_888;
+ dev_info(dev, "set up callbacks for Integrator PL110\n");
+ break;
+ case VERSATILE_CLCD:
+ versatile_syscon_map = map;
+ fb->board->enable = versatile_clcd_enable;
+ fb->board->disable = versatile_clcd_disable;
+ fb->board->decode = versatile_clcd_decode;
+ versatile_panel_probe(dev, endpoint);
+ dev_info(dev, "set up callbacks for Versatile\n");
+ break;
+ case REALVIEW_CLCD_EB:
+ case REALVIEW_CLCD_PB1176:
+ case REALVIEW_CLCD_PB11MP:
+ case REALVIEW_CLCD_PBA8:
+ case REALVIEW_CLCD_PBX:
+ versatile_syscon_map = map;
+ fb->board->enable = realview_clcd_enable;
+ fb->board->disable = realview_clcd_disable;
+ dev_info(dev, "set up callbacks for RealView PL111\n");
+ break;
+ default:
+ dev_info(dev, "unknown Versatile system controller\n");
+ break;
+ }
+
+ return 0;
+}
+
+#endif
projects / karo-tx-linux.git / commitdiff