dmaengine: Pass dma_slave_config .device_fc = NULL for all existing users

.device_fc is added in struct dma_slave_config recently. All user drivers, which
want DMA to be the flow controller must pass this field as false. As earlier
driver don't look to use this feature, mark it false for now.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0d955ffaf44e2c3ec5961f966687da3e675819d9..a09c06ba046c698d2bda950e5aa8e90adfa7e7cb 100644 (file)
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -30,6 +30,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/mmci.h>
 #include <linux/pm_runtime.h>
+#include <linux/types.h>
 
 #include <asm/div64.h>
 #include <asm/io.h>
@@ -370,6 +371,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
                .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
                .src_maxburst = variant->fifohalfsize >> 2, /* # of words */
                .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */
+               .device_fc = false,
        };
        struct dma_chan *chan;
        struct dma_device *device;

diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f35b6bad04767187f971d3de383b53b72f946ecf..68b69a91e5ef5e2356876ae02d4ff281789544c4 100644 (file)
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -33,6 +33,7 @@
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <asm/dma.h>
 #include <asm/irq.h>
@@ -711,6 +712,7 @@ static int mxcmci_setup_dma(struct mmc_host *mmc)
        config->src_addr_width = 4;
        config->dst_maxburst = host->burstlen;
        config->src_maxburst = host->burstlen;
+       config->device_fc = false;
 
        return dmaengine_slave_config(host->dma, config);
 }

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 8418eb03665121db4a6caf809ea8efc4f12b170c..04d6c1b31383f246c10ed5c1615bec7ec946e166 100644 (file)
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/types.h>
 
 #include "spi-dw.h"
 
@@ -136,6 +137,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
        txconf.dst_maxburst = LNW_DMA_MSIZE_16;
        txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
        txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+       txconf.device_fc = false;
 
        txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
                                       (unsigned long) &txconf);
@@ -158,6 +160,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
        rxconf.src_maxburst = LNW_DMA_MSIZE_16;
        rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
        rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+       rxconf.device_fc = false;
 
        rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
                                       (unsigned long) &rxconf);

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 2f9cb43a239870b6db396b8507fb6a67893f1f37..1dc667f8a305fb8b52d4182feaf6694ea73f59f4 100644 (file)
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -901,10 +901,12 @@ static int configure_dma(struct pl022 *pl022)
        struct dma_slave_config rx_conf = {
                .src_addr = SSP_DR(pl022->phybase),
                .direction = DMA_DEV_TO_MEM,
+               .device_fc = false,
        };
        struct dma_slave_config tx_conf = {
                .dst_addr = SSP_DR(pl022->phybase),
                .direction = DMA_MEM_TO_DEV,
+               .device_fc = false,
        };
        unsigned int pages;
        int ret;

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae024025ff356618221717d3fae6b5d296e32db..db7f88a1bdee46eef8ee38d4cd4b4a72cd851323 100644 (file)
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -51,6 +51,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/delay.h>
+#include <linux/types.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -270,6 +271,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
                .direction = DMA_MEM_TO_DEV,
                .dst_maxburst = uap->fifosize >> 1,
+               .device_fc = false,
        };
        struct dma_chan *chan;
        dma_cap_mask_t mask;
@@ -303,6 +305,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                        .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
                        .direction = DMA_DEV_TO_MEM,
                        .src_maxburst = uap->fifosize >> 1,
+                       .device_fc = false,
                };
 
                chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);

diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 97cb45916c4351110e3a21fb2613c2954855ee9b..2a36bf37d7aabc36e671b892bb96867f643a72a9 100644 (file)
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -115,6 +115,7 @@ static bool ux500_configure_channel(struct dma_channel *channel,
        slave_conf.dst_addr = usb_fifo_addr;
        slave_conf.dst_addr_width = addr_width;
        slave_conf.dst_maxburst = 16;
+       slave_conf.device_fc = false;
 
        dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
                                             (unsigned long) &slave_conf);

diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 1acfd25e107df0c3492854f554ecaba06664f7f3..52b0dedbf99641b7d99d05047dba5b66b31c5dd3 100644 (file)
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
+#include <linux/types.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -108,6 +109,8 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
                return 0;
        }
 
+       slave_config.device_fc = false;
+
        if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
                slave_config.direction = DMA_MEM_TO_DEV;
                slave_config.dst_addr = dma_params->dma_addr;