* @isp: OMAP3 ISP device
* @idle: Consider idle state.
*
- * Set the power settings for the ISP and SBL bus and cConfigure the HS/VS
+ * Set the power settings for the ISP and SBL bus and configure the HS/VS
* interrupt source.
*
* We need to configure the HS/VS interrupt source before interrupts get
isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC,
ISPCCDC_LSC_CONFIG, ISPCCDC_LSC_ENABLE);
ccdc->lsc.state = LSC_STATE_STOPPED;
- dev_warn(to_device(ccdc), "LSC prefecth timeout\n");
+ dev_warn(to_device(ccdc), "LSC prefetch timeout\n");
return -ETIMEDOUT;
}
ccdc->lsc.state = LSC_STATE_RUNNING;
ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
- /* Enable LCM interupts */
+ /* Enable LCM interrupts */
isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
* implementation we use a fixed 32 bytes alignment regardless of the
* input format and width. If strict 128 bits alignment support is
* required ispvideo will need to be made aware of this special dual
- * alignement requirements.
+ * alignment requirements.
*/
ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
ccp2->video_in.bpl_alignment = 32;
buf_size = hist_get_buf_size(user_cfg);
if (buf_size > user_cfg->buf_size)
- /* User's buf_size request wasn't enoght */
+ /* User's buf_size request wasn't enough */
user_cfg->buf_size = buf_size;
else if (user_cfg->buf_size > OMAP3ISP_HIST_MAX_BUF_SIZE)
user_cfg->buf_size = OMAP3ISP_HIST_MAX_BUF_SIZE;
#define PREV_MAX_OUT_WIDTH_REV_15 4096
/*
- * Coeficient Tables for the submodules in Preview.
+ * Coefficient Tables for the submodules in Preview.
* Array is initialised with the values from.the tables text file.
*/
}
/*
- * preview_max_out_width - Handle previewer hardware ouput limitations
+ * preview_max_out_width - Handle previewer hardware output limitations
* @isp_revision : ISP revision
* returns maximum width output for current isp revision
*/
* isp_video_queue_free - Free video buffers memory
*
* Buffers can only be freed if the queue isn't streaming and if no buffer is
- * mapped to userspace. Return -EBUSY if those conditions aren't statisfied.
+ * mapped to userspace. Return -EBUSY if those conditions aren't satisfied.
*
* This function must be called with the queue lock held.
*/
#include <linux/types.h>
/*
- * Constants for filter coefficents count
+ * Constants for filter coefficients count
*/
#define COEFF_CNT 32
/*
- * struct isprsz_coef - Structure for resizer filter coeffcients.
+ * struct isprsz_coef - Structure for resizer filter coefficients.
* @h_filter_coef_4tap: Horizontal filter coefficients for 8-phase/4-tap
* mode (.5x-4x)
* @v_filter_coef_4tap: Vertical filter coefficients for 8-phase/4-tap
for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE;
w < end; w++) {
if (unlikely(*w != MAGIC_NUM)) {
- dev_dbg(stat->isp->dev, "%s: endding magic check does "
+ dev_dbg(stat->isp->dev, "%s: ending magic check does "
"not match.\n", stat->subdev.name);
return -EINVAL;
}
if (enable) {
/*
* Only set enable PCR bit if the module was previously
- * enabled through ioct.
+ * enabled through ioctl.
*/
isp_stat_try_enable(stat);
} else {