ARM: dts: AM33XX: Add pinmux configuration for gpio-leds to EVMSK

Add pinmux configurations for gpio based volume keys to am335x-evmsk.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 6f538798786510187883cbf17c11aa06df5608b2..659ec5b73ab44449635cd70c107192c6e87a01d7 100644 (file)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -30,6 +30,20 @@
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
+       am33xx_pinmux: pinmux@44e10800 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&user_leds_s0>;
+
+               user_leds_s0: user_leds_s0 {
+                       pinctrl-single,pins = <
+                               0x10 0x7        /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+                               0x14 0x7        /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+                               0x18 0x7        /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+                               0x1c 0x7        /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+                       >;
+               };
+       };
+
        ocp {
                uart1: serial@44e09000 {
                        status = "okay";