]> git.karo-electronics.de Git - linux-beck.git/commitdiff
bridge: Automatically manage port promiscuous mode.
authorVlad Yasevich <vyasevic@redhat.com>
Fri, 16 May 2014 13:59:20 +0000 (09:59 -0400)
committerDavid S. Miller <davem@davemloft.net>
Fri, 16 May 2014 21:06:33 +0000 (17:06 -0400)
There exist configurations where the administrator or another management
entity has the foreknowledge of all the mac addresses of end systems
that are being bridged together.

In these environments, the administrator can statically configure known
addresses in the bridge FDB and disable flooding and learning on ports.
This makes it possible to turn off promiscuous mode on the interfaces
connected to the bridge.

Here is why disabling flooding and learning allows us to control
promiscuity:
 Consider port X.  All traffic coming into this port from outside the
bridge (ingress) will be either forwarded through other ports of the
bridge (egress) or dropped.  Forwarding (egress) is defined by FDB
entries and by flooding in the event that no FDB entry exists.
In the event that flooding is disabled, only FDB entries define
the egress.  Once learning is disabled, only static FDB entries
provided by a management entity define the egress.  If we provide
information from these static FDBs to the ingress port X, then we'll
be able to accept all traffic that can be successfully forwarded and
drop all the other traffic sooner without spending CPU cycles to
process it.
 Another way to define the above is as following equations:
    ingress = egress + drop
 expanding egress
    ingress = static FDB + learned FDB + flooding + drop
 disabling flooding and learning we a left with
    ingress = static FDB + drop

By adding addresses from the static FDB entries to the MAC address
filter of an ingress port X, we fully define what the bridge can
process without dropping and can thus turn off promiscuous mode,
thus dropping packets sooner.

There have been suggestions that we may want to allow learning
and update the filters with learned addresses as well.  This
would require mac-level authentication similar to 802.1x to
prevent attacks against the hw filters as they are limited
resource.

Additionally, if the user places the bridge device in promiscuous mode,
all ports are placed in promiscuous mode regardless of the changes
to flooding and learning.

Since the above functionality depends on full static configuration,
we have also require that vlan filtering be enabled to take
advantage of this.  The reason is that the bridge has to be
able to receive and process VLAN-tagged frames and the there
are only 2 ways to accomplish this right now: promiscuous mode
or vlan filtering.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/bridge/br_device.c
net/bridge/br_if.c
net/bridge/br_private.h
net/bridge/br_vlan.c

index 9212015abc8f35da11de46846f3de9488a8d7193..d77e2f0ff0e9d5d9644a3f4df02446be6fea15cb 100644 (file)
@@ -112,6 +112,12 @@ static void br_dev_set_multicast_list(struct net_device *dev)
 {
 }
 
+static void br_dev_change_rx_flags(struct net_device *dev, int change)
+{
+       if (change & IFF_PROMISC)
+               br_manage_promisc(netdev_priv(dev));
+}
+
 static int br_dev_stop(struct net_device *dev)
 {
        struct net_bridge *br = netdev_priv(dev);
@@ -309,6 +315,7 @@ static const struct net_device_ops br_netdev_ops = {
        .ndo_get_stats64         = br_get_stats64,
        .ndo_set_mac_address     = br_set_mac_address,
        .ndo_set_rx_mode         = br_dev_set_multicast_list,
+       .ndo_change_rx_flags     = br_dev_change_rx_flags,
        .ndo_change_mtu          = br_change_mtu,
        .ndo_do_ioctl            = br_dev_ioctl,
 #ifdef CONFIG_NET_POLL_CONTROLLER
index 3fefff97454064e21fabdda22fb3f4951747c801..091d39f5067cd1b8bb7b7be32e4b43cda625cddc 100644 (file)
@@ -85,6 +85,82 @@ void br_port_carrier_check(struct net_bridge_port *p)
        spin_unlock_bh(&br->lock);
 }
 
+static void br_port_set_promisc(struct net_bridge_port *p)
+{
+       int err = 0;
+
+       if (br_promisc_port(p))
+               return;
+
+       err = dev_set_promiscuity(p->dev, 1);
+       if (err)
+               return;
+
+       br_fdb_unsync_static(p->br, p);
+       p->flags |= BR_PROMISC;
+}
+
+static void br_port_clear_promisc(struct net_bridge_port *p)
+{
+       int err;
+
+       /* Check if the port is already non-promisc or if it doesn't
+        * support UNICAST filtering.  Without unicast filtering support
+        * we'll end up re-enabling promisc mode anyway, so just check for
+        * it here.
+        */
+       if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
+               return;
+
+       /* Since we'll be clearing the promisc mode, program the port
+        * first so that we don't have interruption in traffic.
+        */
+       err = br_fdb_sync_static(p->br, p);
+       if (err)
+               return;
+
+       dev_set_promiscuity(p->dev, -1);
+       p->flags &= ~BR_PROMISC;
+}
+
+/* When a port is added or removed or when certain port flags
+ * change, this function is called to automatically manage
+ * promiscuity setting of all the bridge ports.  We are always called
+ * under RTNL so can skip using rcu primitives.
+ */
+void br_manage_promisc(struct net_bridge *br)
+{
+       struct net_bridge_port *p;
+       bool set_all = false;
+
+       /* If vlan filtering is disabled or bridge interface is placed
+        * into promiscuous mode, place all ports in promiscuous mode.
+        */
+       if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br))
+               set_all = true;
+
+       list_for_each_entry(p, &br->port_list, list) {
+               if (set_all) {
+                       br_port_set_promisc(p);
+               } else {
+                       /* If the number of auto-ports is <= 1, then all other
+                        * ports will have their output configuration
+                        * statically specified through fdbs.  Since ingress
+                        * on the auto-port becomes forwarding/egress to other
+                        * ports and egress configuration is statically known,
+                        * we can say that ingress configuration of the
+                        * auto-port is also statically known.
+                        * This lets us disable promiscuous mode and write
+                        * this config to hw.
+                        */
+                       if (br->auto_cnt <= br_auto_port(p))
+                               br_port_clear_promisc(p);
+                       else
+                               br_port_set_promisc(p);
+               }
+       }
+}
+
 static void nbp_update_port_count(struct net_bridge *br)
 {
        struct net_bridge_port *p;
@@ -94,7 +170,23 @@ static void nbp_update_port_count(struct net_bridge *br)
                if (br_auto_port(p))
                        cnt++;
        }
-       br->auto_cnt = cnt;
+       if (br->auto_cnt != cnt) {
+               br->auto_cnt = cnt;
+               br_manage_promisc(br);
+       }
+}
+
+static void nbp_delete_promisc(struct net_bridge_port *p)
+{
+       /* If port is currently promiscous, unset promiscuity.
+        * Otherwise, it is a static port so remove all addresses
+        * from it.
+        */
+       dev_set_allmulti(p->dev, -1);
+       if (br_promisc_port(p))
+               dev_set_promiscuity(p->dev, -1);
+       else
+               br_fdb_unsync_static(p->br, p);
 }
 
 static void release_nbp(struct kobject *kobj)
@@ -145,7 +237,7 @@ static void del_nbp(struct net_bridge_port *p)
 
        sysfs_remove_link(br->ifobj, p->dev->name);
 
-       dev_set_promiscuity(dev, -1);
+       nbp_delete_promisc(p);
 
        spin_lock_bh(&br->lock);
        br_stp_disable_port(p);
@@ -153,11 +245,10 @@ static void del_nbp(struct net_bridge_port *p)
 
        br_ifinfo_notify(RTM_DELLINK, p);
 
-       nbp_vlan_flush(p);
-       br_fdb_delete_by_port(br, p, 1);
-
        list_del_rcu(&p->list);
 
+       nbp_vlan_flush(p);
+       br_fdb_delete_by_port(br, p, 1);
        nbp_update_port_count(br);
 
        dev->priv_flags &= ~IFF_BRIDGE_PORT;
@@ -238,7 +329,7 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br,
        p->path_cost = port_cost(dev);
        p->priority = 0x8000 >> BR_PORT_BITS;
        p->port_no = index;
-       p->flags = BR_LEARNING | BR_FLOOD | BR_PROMISC;
+       p->flags = BR_LEARNING | BR_FLOOD;
        br_init_port(p);
        p->state = BR_STATE_DISABLED;
        br_stp_port_timer_init(p);
@@ -367,7 +458,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 
        call_netdevice_notifiers(NETDEV_JOIN, dev);
 
-       err = dev_set_promiscuity(dev, 1);
+       err = dev_set_allmulti(dev, 1);
        if (err)
                goto put_back;
 
index 00922a4fa7952f3eee465ee20a8e19ae2d74e95b..2b2286d8572dae6d1089b9723adbc70fd4c120ca 100644 (file)
@@ -424,6 +424,7 @@ int br_min_mtu(const struct net_bridge *br);
 netdev_features_t br_features_recompute(struct net_bridge *br,
                                        netdev_features_t features);
 void br_port_flags_change(struct net_bridge_port *port, unsigned long mask);
+void br_manage_promisc(struct net_bridge *br);
 
 /* br_input.c */
 int br_handle_frame_finish(struct sk_buff *skb);
@@ -641,6 +642,10 @@ static inline u16 br_get_pvid(const struct net_port_vlans *v)
        return v->pvid ?: VLAN_N_VID;
 }
 
+static inline int br_vlan_enabled(struct net_bridge *br)
+{
+       return br->vlan_enabled;
+}
 #else
 static inline bool br_allowed_ingress(struct net_bridge *br,
                                      struct net_port_vlans *v,
@@ -721,6 +726,11 @@ static inline u16 br_get_pvid(const struct net_port_vlans *v)
 {
        return VLAN_N_VID;      /* Returns invalid vid */
 }
+
+static inline int br_vlan_enabled(struct net_bridge *br);
+{
+       return 0;
+}
 #endif
 
 /* br_netfilter.c */
index 4a37161027899ab12d0f2dd5f4c5d69a1ed98716..24c5cc55589f128a9a8b630b5cc75ada3a27b6c3 100644 (file)
@@ -332,6 +332,7 @@ int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
                goto unlock;
 
        br->vlan_enabled = val;
+       br_manage_promisc(br);
 
 unlock:
        rtnl_unlock();