The boot loader must ultimately be able to provide a MACH_TYPE_xxx
value to the kernel. (see linux/arch/arm/tools/mach-types).
-
-4. Setup the kernel tagged list
--------------------------------
+4. Setup boot data
+------------------
Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED
New boot loaders: MANDATORY
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel. The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
The boot loader must create and initialise the kernel tagged list.
A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag
the kernel decompressor nor initrd 'bootp' program will overwrite
it. The recommended placement is in the first 16KiB of RAM.
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data. The
+dtb format is documented in Documentation/devicetree/booting-without-of.txt.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location. The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it. The recommended placement is in the first 16KiB of RAM
+with the caveat that it may not be located at physical address 0 since
+the kernel interprets a value of 0 in r2 to mean neither a tagged list
+nor a dtb were passed.
+
5. Calling the kernel image
---------------------------
- CPU register settings
r0 = 0,
r1 = machine type number discovered in (3) above.
- r2 = physical address of tagged list in system RAM.
+ r2 = physical address of tagged list in system RAM, or
+ physical address of device tree block (dtb) in system RAM
- CPU mode
All forms of interrupts must be disabled (IRQs and FIQs)
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
- S3C64XX: S3C6400 and S3C6410
- S5P6440
- - S5P6442
- S5PC100
- S5PC110 / S5PV210
unifying all the SoCs into one kernel.
s5p6440_defconfig - S5P6440 specific default configuration
- s5p6442_defconfig - S5P6442 specific default configuration
s5pc100_defconfig - S5PC100 specific default configuration
s5pc110_defconfig - S5PC110 specific default configuration
s5pv210_defconfig - S5PV210 specific default configuration
=================
I - Introduction
- 1) Entry point for arch/powerpc
- 2) Entry point for arch/x86
+ 1) Entry point for arch/arm
+ 2) Entry point for arch/powerpc
+ 3) Entry point for arch/x86
II - The DT block format
1) Header
it with special cases.
-1) Entry point for arch/powerpc
+1) Entry point for arch/arm
+---------------------------
+
+ There is one single entry point to the kernel, at the start
+ of the kernel image. That entry point supports two calling
+ conventions. A summary of the interface is described here. A full
+ description of the boot requirements is documented in
+ Documentation/arm/Booting
+
+ a) ATAGS interface. Minimal information is passed from firmware
+ to the kernel with a tagged list of predefined parameters.
+
+ r0 : 0
+
+ r1 : Machine type number
+
+ r2 : Physical address of tagged list in system RAM
+
+ b) Entry with a flattened device-tree block. Firmware loads the
+ physical address of the flattened device tree block (dtb) into r2,
+ r1 is not used, but it is considered good practise to use a valid
+ machine number as described in Documentation/arm/Booting.
+
+ r0 : 0
+
+ r1 : Valid machine type number. When using a device tree,
+ a single machine type number will often be assigned to
+ represent a class or family of SoCs.
+
+ r2 : physical pointer to the device-tree block
+ (defined in chapter II) in RAM. Device tree can be located
+ anywhere in system RAM, but it should be aligned on a 64 bit
+ boundary.
+
+ The kernel will differentiate between ATAGS and device tree booting by
+ reading the memory pointed to by r2 and looking for either the flattened
+ device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
+ offset 0x4 from r2 (0x54410001).
+
+2) Entry point for arch/powerpc
-------------------------------
There is one single entry point to the kernel, at the start
cannot support both configurations with Book E and configurations
with classic Powerpc architectures.
-2) Entry point for arch/x86
+3) Entry point for arch/x86
-------------------------------
There is one single 32bit entry point to the kernel at code32_start,
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select CLKDEV_LOOKUP
+ select ARM_PATCH_PHYS_VIRT if MMU
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
-config ARCH_S5P6442
- bool "Samsung S5P6442"
- select CPU_V6
- select GENERIC_GPIO
- select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
- select HAVE_S3C2410_WATCHDOG if WATCHDOG
- help
- Samsung S5P6442 CPU based systems
-
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
source "arch/arm/mach-s5p64x0/Kconfig"
-source "arch/arm/mach-s5p6442/Kconfig"
-
source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
- depends on !ARCH_MSM
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
- ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+ ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
config ARCH_SELECT_MEMORY_MODEL
def_bool ARCH_SPARSEMEM_ENABLE
+config HAVE_ARCH_PFN_VALID
+ def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
config HIGHMEM
bool "High Memory Support"
depends on MMU
menu "Boot options"
+config USE_OF
+ bool "Flattened Device Tree support"
+ select OF
+ select OF_EARLY_FLATTREE
+ help
+ Include support for flattened device tree machine descriptions.
+
# Compressed boot loader in ROM. Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
- depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
+ depends on !ARCH_S5P64X0 && !ARCH_S5PC100
depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
-machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
- default 3 if ARCH_S5P6442 || ARCH_S5PC100
+ default 3 if ARCH_S5PC100
default 2
depends on ARM_VIC
help
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-AT572D940HF"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT572D940HF=y
-CONFIG_MACH_AT572D940HFEB=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_BLOCK2MTD=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_R3964=m
-CONFIG_RAW_DRIVER=m
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_SPIDEV=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1305=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_CHECK=y
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MACH_AT91SAM9261EK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_DM9000=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_AT73C213=y
+CONFIG_SND_USB_AUDIO=m
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_FTRACE=y
+CONFIG_CRC_CCITT=m
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9263=y
CONFIG_MACH_AT91SAM9263EK=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_MACH_NEOCORE926=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
+CONFIG_NET_KEY=y
CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=y
+CONFIG_SDIO_UART=m
CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_FUSE_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_FTRACE=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_XZ_DEC=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_SMDKV310=y
+CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
+CONFIG_MACH_NURI=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_NEOCORE926=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_AT91=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_HW is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6442=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6442=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
* Support for FIQ on ARM architectures.
* Written by Philip Blundell <philb@gnu.org>, 1998
* Re-written by Russell King
+ *
+ * NOTE: The FIQ mode registers are not magically preserved across
+ * suspend/resume.
+ *
+ * Drivers which require these registers to be preserved across power
+ * management operations must implement appropriate suspend/resume handlers to
+ * save and restore them.
*/
#ifndef __ASM_FIQ_H
extern int claim_fiq(struct fiq_handler *f);
extern void release_fiq(struct fiq_handler *f);
extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
extern void enable_fiq(int fiq);
extern void disable_fiq(int fiq);
+/* helpers defined in fiqasm.S: */
+extern void __set_fiq_regs(unsigned long const *regs);
+extern void __get_fiq_regs(unsigned long *regs);
+
+static inline void set_fiq_regs(struct pt_regs const *regs)
+{
+ __set_fiq_regs(®s->ARM_r8);
+}
+
+static inline void get_fiq_regs(struct pt_regs *regs)
+{
+ __get_fiq_regs(®s->ARM_r8);
+}
+
#endif
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
+ const char **dt_compat; /* array of device tree
+ * 'compatible' strings */
unsigned int nr_irqs; /* number of IRQs */
*/
extern struct machine_desc *machine_desc;
+/*
+ * Machine type table - also only accessible during boot
+ */
+extern struct machine_desc __arch_info_begin[], __arch_info_end[];
+#define for_each_machine_desc(p) \
+ for (p = __arch_info_begin; p < __arch_info_end; p++)
+
/*
* Set of macros to define architecture features. This is built into
* a table by the linker.
typedef struct page *pgtable_t;
-#ifndef CONFIG_SPARSEMEM
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
extern int pfn_valid(unsigned long);
#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/prom.h
+ *
+ * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASMARM_PROM_H
+#define __ASMARM_PROM_H
+
+#ifdef CONFIG_OF
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+ return;
+}
+
+extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern void arm_dt_memblock_reserve(void);
+
+#else /* CONFIG_OF */
+
+static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+{
+ return NULL;
+}
+
+static inline void arm_dt_memblock_reserve(void) { }
+
+#endif /* CONFIG_OF */
+#endif /* ASMARM_PROM_H */
#define bank_phys_end(bank) ((bank)->start + (bank)->size)
#define bank_phys_size(bank) (bank)->size
+extern int arm_add_memory(phys_addr_t start, unsigned long size);
+extern void early_print(const char *str, ...);
+extern void dump_machine_table(void);
+
#endif /* __KERNEL__ */
#endif
*/
struct secondary_data {
unsigned long pgdir;
+ unsigned long swapper_pg_dir;
void *stack;
};
extern struct secondary_data secondary_data;
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
+#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
/*
* The following SWIs are ARM private.
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
-obj-$(CONFIG_FIQ) += fiq.o
+obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_HAVE_TCM) += tcm.o
+obj-$(CONFIG_OF) += devtree.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o
CFLAGS_swp_emulate.o := -Wa,-march=armv7-a
CALL(sys_open_by_handle_at)
CALL(sys_clock_adjtime)
CALL(sys_syncfs)
+ CALL(sys_sendmmsg)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
--- /dev/null
+/*
+ * linux/arch/arm/kernel/devtree.c
+ *
+ * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ arm_add_memory(base, size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return alloc_bootmem_align(size, align);
+}
+
+void __init arm_dt_memblock_reserve(void)
+{
+ u64 *reserve_map, base, size;
+
+ if (!initial_boot_params)
+ return;
+
+ /* Reserve the dtb region */
+ memblock_reserve(virt_to_phys(initial_boot_params),
+ be32_to_cpu(initial_boot_params->totalsize));
+
+ /*
+ * Process the reserve map. This will probably overlap the initrd
+ * and dtb locations which are already reserved, but overlaping
+ * doesn't hurt anything
+ */
+ reserve_map = ((void*)initial_boot_params) +
+ be32_to_cpu(initial_boot_params->off_mem_rsvmap);
+ while (1) {
+ base = be64_to_cpup(reserve_map++);
+ size = be64_to_cpup(reserve_map++);
+ if (!size)
+ break;
+ memblock_reserve(base, size);
+ }
+}
+
+/**
+ * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
+ * @dt_phys: physical address of dt blob
+ *
+ * If a dtb was passed to the kernel in r2, then use it to choose the
+ * correct machine_desc and to setup the system.
+ */
+struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+{
+ struct boot_param_header *devtree;
+ struct machine_desc *mdesc, *mdesc_best = NULL;
+ unsigned int score, mdesc_score = ~1;
+ unsigned long dt_root;
+ const char *model;
+
+ devtree = phys_to_virt(dt_phys);
+
+ /* check device tree validity */
+ if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+ return NULL;
+
+ /* Search the mdescs for the 'best' compatible value match */
+ initial_boot_params = devtree;
+ dt_root = of_get_flat_dt_root();
+ for_each_machine_desc(mdesc) {
+ score = of_flat_dt_match(dt_root, mdesc->dt_compat);
+ if (score > 0 && score < mdesc_score) {
+ mdesc_best = mdesc;
+ mdesc_score = score;
+ }
+ }
+ if (!mdesc_best) {
+ const char *prop;
+ long size;
+
+ early_print("\nError: unrecognized/unsupported "
+ "device tree compatible list:\n[ ");
+
+ prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
+ while (size > 0) {
+ early_print("'%s' ", prop);
+ size -= strlen(prop) + 1;
+ prop += strlen(prop) + 1;
+ }
+ early_print("]\n\n");
+
+ dump_machine_table(); /* does not return */
+ }
+
+ model = of_get_flat_dt_prop(dt_root, "model", NULL);
+ if (!model)
+ model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
+ if (!model)
+ model = "<unknown>";
+ pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
+
+ /* Retrieve various information from the /chosen node */
+ of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
+ /* Initialize {size,address}-cells info */
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ /* Setup memory, calling early_init_dt_add_memory_arch */
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+
+ /* Change machine number to match the mdesc we're using */
+ __machine_arch_type = mdesc_best->nr;
+
+ return mdesc_best;
+}
+
+/**
+ * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
+ *
+ * Currently the mapping mechanism is trivial; simple flat hwirq numbers are
+ * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not
+ * supported.
+ */
+unsigned int irq_create_of_mapping(struct device_node *controller,
+ const u32 *intspec, unsigned int intsize)
+{
+ return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
flush_icache_range(0x1c, 0x1c + length);
}
-/*
- * Taking an interrupt in FIQ mode is death, so both these functions
- * disable irqs for the duration. Note - these functions are almost
- * entirely coded in assembly.
- */
-void __naked set_fiq_regs(struct pt_regs *regs)
-{
- register unsigned long tmp;
- asm volatile (
- "mov ip, sp\n\
- stmfd sp!, {fp, ip, lr, pc}\n\
- sub fp, ip, #4\n\
- mrs %0, cpsr\n\
- msr cpsr_c, %2 @ select FIQ mode\n\
- mov r0, r0\n\
- ldmia %1, {r8 - r14}\n\
- msr cpsr_c, %0 @ return to SVC mode\n\
- mov r0, r0\n\
- ldmfd sp, {fp, sp, pc}"
- : "=&r" (tmp)
- : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
-}
-
-void __naked get_fiq_regs(struct pt_regs *regs)
-{
- register unsigned long tmp;
- asm volatile (
- "mov ip, sp\n\
- stmfd sp!, {fp, ip, lr, pc}\n\
- sub fp, ip, #4\n\
- mrs %0, cpsr\n\
- msr cpsr_c, %2 @ select FIQ mode\n\
- mov r0, r0\n\
- stmia %1, {r8 - r14}\n\
- msr cpsr_c, %0 @ return to SVC mode\n\
- mov r0, r0\n\
- ldmfd sp, {fp, sp, pc}"
- : "=&r" (tmp)
- : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
-}
-
int claim_fiq(struct fiq_handler *f)
{
int ret = 0;
}
EXPORT_SYMBOL(set_fiq_handler);
-EXPORT_SYMBOL(set_fiq_regs);
-EXPORT_SYMBOL(get_fiq_regs);
+EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */
+EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */
EXPORT_SYMBOL(claim_fiq);
EXPORT_SYMBOL(release_fiq);
EXPORT_SYMBOL(enable_fiq);
--- /dev/null
+/*
+ * linux/arch/arm/kernel/fiqasm.S
+ *
+ * Derived from code originally in linux/arch/arm/kernel/fiq.c:
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998, 1999 Phil Blundell
+ * Copyright (C) 2011, Linaro Limited
+ *
+ * FIQ support written by Philip Blundell <philb@gnu.org>, 1998.
+ *
+ * FIQ support re-written by Russell King to be more generic
+ *
+ * v7/Thumb-2 compatibility modifications by Linaro Limited, 2011.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Taking an interrupt in FIQ mode is death, so both these functions
+ * disable irqs for the duration.
+ */
+
+ENTRY(__set_fiq_regs)
+ mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+ mrs r1, cpsr
+ msr cpsr_c, r2 @ select FIQ mode
+ mov r0, r0 @ avoid hazard prior to ARMv4
+ ldmia r0!, {r8 - r12}
+ ldr sp, [r0], #4
+ ldr lr, [r0]
+ msr cpsr_c, r1 @ return to SVC mode
+ mov r0, r0 @ avoid hazard prior to ARMv4
+ mov pc, lr
+ENDPROC(__set_fiq_regs)
+
+ENTRY(__get_fiq_regs)
+ mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+ mrs r1, cpsr
+ msr cpsr_c, r2 @ select FIQ mode
+ mov r0, r0 @ avoid hazard prior to ARMv4
+ stmia r0!, {r8 - r12}
+ str sp, [r0], #4
+ str lr, [r0]
+ msr cpsr_c, r1 @ return to SVC mode
+ mov r0, r0 @ avoid hazard prior to ARMv4
+ mov pc, lr
+ENDPROC(__get_fiq_regs)
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */
+#endif
+
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
- * that the ATAG_CORE marker is first and present. Future revisions
+ * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE
+ * is selected, then it will also accept a dtb pointer. Future revisions
* of this function may be more lenient with the physical address and
* may also be able to move the ATAGS block if necessary.
*
* Returns:
- * r2 either valid atags pointer, or zero
+ * r2 either valid atags pointer, valid dtb pointer, or zero
* r5, r6 corrupted
*/
__vet_atags:
tst r2, #0x3 @ aligned?
bne 1f
- ldr r5, [r2, #0] @ is first tag ATAG_CORE?
- cmp r5, #ATAG_CORE_SIZE
+ ldr r5, [r2, #0]
+#ifdef CONFIG_OF_FLATTREE
+ ldr r6, =OF_DT_MAGIC @ is it a DTB?
+ cmp r5, r6
+ beq 2f
+#endif
+ cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE?
cmpne r5, #ATAG_CORE_SIZE_EMPTY
bne 1f
ldr r5, [r2, #4]
cmp r5, r6
bne 1f
- mov pc, lr @ atag pointer is ok
+2: mov pc, lr @ atag/dtb pointer is ok
1: mov r2, #0
mov pc, lr
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags/dtb pointer
* r9 = processor ID
*/
__INIT
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr, r2 = atags pointer.
+ * r1 = machine nr, r2 = atags or dtb pointer.
*
* This code is mostly position independent, so if you link the kernel at
* 0xc0008000, you call this at __pa(0xc0008000).
#endif
/*
- * r1 = machine no, r2 = atags,
+ * r1 = machine no, r2 = atags or dtb,
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
*/
bl __vet_atags
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
adr lr, BSYM(1f) @ return (PIC) address
+ mov r8, r4 @ set TTBR1 to swapper_pg_dir
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
*/
adr r4, __secondary_data
ldmia r4, {r5, r7, r12} @ address to jump to after
- sub r4, r4, r5 @ mmu has been enabled
- ldr r4, [r7, r4] @ get secondary_data.pgdir
+ sub lr, r4, r5 @ mmu has been enabled
+ ldr r4, [r7, lr] @ get secondary_data.pgdir
+ add r7, r7, #4
+ ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
adr lr, BSYM(__enable_mmu) @ return address
mov r13, r12 @ __secondary_switched address
ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags or dtb pointer
* r4 = page table pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*
* r0 = cp#15 control register
* r1 = machine ID
- * r2 = atags pointer
+ * r2 = atags or dtb pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*
#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/kexec.h>
+#include <linux/of_fdt.h>
#include <linux/crash_dump.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <asm/cachetype.h>
#include <asm/tlbflush.h>
+#include <asm/prom.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
*/
extern struct proc_info_list *lookup_processor_type(unsigned int);
-static void __init early_print(const char *str, ...)
+void __init early_print(const char *str, ...)
{
extern void printascii(const char *);
char buf[256];
: "r14");
}
-static struct machine_desc * __init setup_machine(unsigned int nr)
+void __init dump_machine_table(void)
{
- extern struct machine_desc __arch_info_begin[], __arch_info_end[];
struct machine_desc *p;
- /*
- * locate machine in the list of supported machines.
- */
- for (p = __arch_info_begin; p < __arch_info_end; p++)
- if (nr == p->nr) {
- printk("Machine: %s\n", p->name);
- return p;
- }
-
- early_print("\n"
- "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
- "Available machine support:\n\nID (hex)\tNAME\n", nr);
-
- for (p = __arch_info_begin; p < __arch_info_end; p++)
+ early_print("Available machine support:\n\nID (hex)\tNAME\n");
+ for_each_machine_desc(p)
early_print("%08x\t%s\n", p->nr, p->name);
early_print("\nPlease check your kernel config and/or bootloader.\n");
/* can't use cpu_relax() here as it may require MMU setup */;
}
-static int __init arm_add_memory(phys_addr_t start, unsigned long size)
+int __init arm_add_memory(phys_addr_t start, unsigned long size)
{
struct membank *bank = &meminfo.bank[meminfo.nr_banks];
tag->hdr.tag = ATAG_NONE;
}
-void __init setup_arch(char **cmdline_p)
+static struct machine_desc * __init setup_machine_tags(unsigned int nr)
{
struct tag *tags = (struct tag *)&init_tags;
- struct machine_desc *mdesc;
+ struct machine_desc *mdesc = NULL, *p;
char *from = default_command_line;
init_tags.mem.start = PHYS_OFFSET;
- unwind_init();
-
- setup_processor();
- mdesc = setup_machine(machine_arch_type);
- machine_desc = mdesc;
- machine_name = mdesc->name;
+ /*
+ * locate machine in the list of supported machines.
+ */
+ for_each_machine_desc(p)
+ if (nr == p->nr) {
+ printk("Machine: %s\n", p->name);
+ mdesc = p;
+ break;
+ }
- if (mdesc->soft_reboot)
- reboot_setup("s");
+ if (!mdesc) {
+ early_print("\nError: unrecognized/unsupported machine ID"
+ " (r1 = 0x%08x).\n\n", nr);
+ dump_machine_table(); /* does not return */
+ }
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
if (tags->hdr.tag != ATAG_CORE)
convert_to_tag_list(tags);
#endif
- if (tags->hdr.tag != ATAG_CORE)
+
+ if (tags->hdr.tag != ATAG_CORE) {
+#if defined(CONFIG_OF)
+ /*
+ * If CONFIG_OF is set, then assume this is a reasonably
+ * modern system that should pass boot parameters
+ */
+ early_print("Warning: Neither atags nor dtb found\n");
+#endif
tags = (struct tag *)&init_tags;
+ }
if (mdesc->fixup)
mdesc->fixup(mdesc, tags, &from, &meminfo);
parse_tags(tags);
}
+ /* parse_early_param needs a boot_command_line */
+ strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+ return mdesc;
+}
+
+
+void __init setup_arch(char **cmdline_p)
+{
+ struct machine_desc *mdesc;
+
+ unwind_init();
+
+ setup_processor();
+ mdesc = setup_machine_fdt(__atags_pointer);
+ if (!mdesc)
+ mdesc = setup_machine_tags(machine_arch_type);
+ machine_desc = mdesc;
+ machine_name = mdesc->name;
+
+ if (mdesc->soft_reboot)
+ reboot_setup("s");
+
init_mm.start_code = (unsigned long) _text;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
- /* parse_early_param needs a boot_command_line */
- strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
/* populate cmd_line too for later use, preserving boot_command_line */
strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
paging_init(mdesc);
request_standard_resources(mdesc);
+ unflatten_device_tree();
+
#ifdef CONFIG_SMP
if (is_smp())
smp_init_cpus();
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
secondary_data.pgdir = virt_to_phys(pgd);
+ secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
#include <linux/linkage.h>
#include <asm/assembler.h>
-
+#include <asm/unwind.h>
.macro ARM_DIV_BODY dividend, divisor, result, curbit
ENTRY(__udivsi3)
ENTRY(__aeabi_uidiv)
+UNWIND(.fnstart)
subs r2, r1, #1
moveq pc, lr
mov r0, r0, lsr r2
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__udivsi3)
ENDPROC(__aeabi_uidiv)
ENTRY(__umodsi3)
+UNWIND(.fnstart)
subs r2, r1, #1 @ compare divisor with 1
bcc Ldiv0
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__umodsi3)
ENTRY(__divsi3)
ENTRY(__aeabi_idiv)
+UNWIND(.fnstart)
cmp r1, #0
eor ip, r0, r1 @ save the sign of the result.
rsbmi r0, r0, #0
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__divsi3)
ENDPROC(__aeabi_idiv)
ENTRY(__modsi3)
+UNWIND(.fnstart)
cmp r1, #0
beq Ldiv0
rsbmi r0, r0, #0
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__modsi3)
#ifdef CONFIG_AEABI
ENTRY(__aeabi_uidivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr} )
stmfd sp!, {r0, r1, ip, lr}
bl __aeabi_uidiv
sub r1, r1, r3
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__aeabi_uidivmod)
ENTRY(__aeabi_idivmod)
-
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr} )
stmfd sp!, {r0, r1, ip, lr}
bl __aeabi_idiv
ldmfd sp!, {r1, r2, ip, lr}
sub r1, r1, r3
mov pc, lr
+UNWIND(.fnend)
ENDPROC(__aeabi_idivmod)
#endif
Ldiv0:
-
+UNWIND(.fnstart)
+UNWIND(.pad #4)
+UNWIND(.save {lr})
str lr, [sp, #-8]!
bl __div0
mov r0, #0 @ About as wrong as it could be.
ldr pc, [sp], #8
-
-
+UNWIND(.fnend)
+ENDPROC(Ldiv0)
config HAVE_AT91_DATAFLASH_CARD
bool
-config HAVE_NAND_ATMEL_BUSWIDTH_16
- bool
-
config HAVE_AT91_USART3
bool
select HAVE_FB_ATMEL
select HAVE_NET_MACB
-config ARCH_AT572D940HF
- bool "AT572D940HF"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
-
config ARCH_AT91X40
bool "AT91x40"
select ARCH_USES_GETTIMEOFFSET
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
"ES" at the end of the name means that this board is an
config MACH_AT91CAP9ADK
bool "Atmel AT91CAP9A-DK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
# ----------------------------------------------------------
-if ARCH_AT572D940HF
-
-comment "AT572D940HF Board Type"
-
-config MACH_AT572D940HFEB
- bool "AT572D940HF-EK"
- depends on ARCH_AT572D940HF
- select HAVE_AT91_DATAFLASH_CARD
- select HAVE_NAND_ATMEL_BUSWIDTH_16
- help
- Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
- <http://www.atmel.com/products/diopsis/default.asp>
-
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91X40
comment "AT91X40 Board Type"
help
Enable support for the DataFlash card.
-config MTD_NAND_ATMEL_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
- depends on HAVE_NAND_ATMEL_BUSWIDTH_16
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
# ----------------------------------------------------------
comment "AT91 Feature Selections"
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-# AT572D940HF board-specific support
-obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
-
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+++ /dev/null
-/*
- * arch/arm/mach-at91/at572d940hf.c
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at572d940hf.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at572d940hf_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
- .length = AT572D940HF_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "macb_clk",
- .pmc_mask = 1 << AT572D940HF_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT572D940HF_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT572D940HF_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
- .name = "ssc2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT572D940HF_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc3_clk = {
- .name = "ssc3_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
- .name = "can0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_CAN0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can1_clk = {
- .name = "can1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_CAN1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mAgicV_clk = {
- .name = "mAgicV_clk",
- .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &macb_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi0_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &ohci_clk,
- &ssc3_clk,
- &twi1_clk,
- &can0_clk,
- &can1_clk,
- &mAgicV_clk,
- /* irq0 .. irq2 */
-};
-
-/*
- * The five programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static struct clk mAgicV_mem_clk = {
- .name = "mAgicV_mem_clk",
- .pmc_mask = AT91_PMC_PCK4,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 4,
-};
-
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
-static void __init at572d940hf_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
- clk_register(&mAgicV_mem_clk);
-
- clk_register(&hck0);
- clk_register(&hck1);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at572d940hf_gpio[] = {
- {
- .id = AT572D940HF_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
- }, {
- .id = AT572D940HF_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
- }, {
- .id = AT572D940HF_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
- }
-};
-
-static void at572d940hf_reset(void)
-{
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- * AT572D940HF processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at572d940hf_initialize(unsigned long main_clock)
-{
- /* Map peripherals */
- iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
-
- at91_arch_reset = at572d940hf_reset;
- at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
- | (1 << AT572D940HF_ID_IRQ2);
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at572d940hf_register_clocks();
-
- /* Register GPIO subsystem */
- at91_gpio_init(at572d940hf_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 3, /* Ethernet */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface 0 */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 3, /* USB Host port */
- 3, /* Serial Synchronous Controller 3 */
- 0, /* Two-Wire Interface 1 */
- 0, /* CAN Controller 0 */
- 0, /* CAN Controller 1 */
- 0, /* mAgicV HALT line */
- 0, /* mAgicV SIRQ0 line */
- 0, /* mAgicV exception line */
- 0, /* mAgicV end of DMA line */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at572d940hf_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
-
+++ /dev/null
-/*
- * arch/arm/mach-at91/at572d940hf_devices.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at572d940hf.h>
-#include <mach/at572d940hf_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-#include "sam9_smc.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT572D940HF_UHP_BASE,
- .end = AT572D940HF_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_UHP,
- .end = AT572D940HF_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- if (!data)
- return;
-
- usbh_data = *data;
- platform_device_register(&at572d940hf_usbh_device);
-
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_UDP,
- .end = AT572D940HF_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_UDP,
- .end = AT572D940HF_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (data->vbus_pin) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally */
-
- udc_data = *data;
- platform_device_register(&at572d940hf_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_EMAC,
- .end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_EMAC,
- .end = AT572D940HF_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
- if (!data)
- return;
-
- if (data->phy_irq_pin) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Only RMII is supported */
- data->is_rmii = 1;
-
- /* Pins used for RMII */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
-
- eth_data = *data;
- platform_device_register(&at572d940hf_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_MCI,
- .end = AT572D940HF_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_MCI,
- .end = AT572D940HF_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (data->det_pin) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (data->wp_pin)
- at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PC22, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PC23, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PC24, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PC25, 1);
- at91_set_A_periph(AT91_PIN_PC26, 1);
- at91_set_A_periph(AT91_PIN_PC27, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at572d940hf_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at572d940hf_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (data->enable_pin)
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (data->rdy_pin)
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (data->det_pin)
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
- at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
-
- nand_data = *data;
- platform_device_register(&at572d940hf_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PC7,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PC8,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at572d940hf_twi_device {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI0,
- .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI0,
- .end = AT572D940HF_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi0_device = {
- .name = "at91_i2c",
- .id = 0,
- .resource = twi0_resources,
- .num_resources = ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI1,
- .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI1,
- .end = AT572D940HF_ID_TWI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi1_device = {
- .name = "at91_i2c",
- .id = 1,
- .resource = twi1_resources,
- .num_resources = ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI0 interface */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- /* pins used for TWI1 interface */
- at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC20, 1);
-
- at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC21, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi0_device);
- platform_device_register(&at572d940hf_twi1_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_SPI0,
- .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_SPI0,
- .end = AT572D940HF_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_SPI1,
- .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_SPI1,
- .end = AT572D940HF_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
- platform_device_register(&at572d940hf_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
-
- at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
- platform_device_register(&at572d940hf_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TCB,
- .end = AT572D940HF_BASE_TCB + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TC0,
- .end = AT572D940HF_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = AT572D940HF_ID_TC1,
- .end = AT572D940HF_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = AT572D940HF_ID_TC2,
- .end = AT572D940HF_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
- platform_device_register(&at572d940hf_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at572d940hf_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
- platform_device_register(&at572d940hf_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct platform_device at572d940hf_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at572d940hf_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US0,
- .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US0,
- .end = AT572D940HF_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US1,
- .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US1,
- .end = AT572D940HF_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US2,
- .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US2,
- .end = AT572D940HF_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at572d940hf_dbgu_device;
- configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US0:
- pdev = &at572d940hf_uart0_device;
- configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US1:
- pdev = &at572d940hf_uart1_device;
- configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
- break;
- case AT572D940HF_ID_US2:
- pdev = &at572d940hf_uart2_device;
- configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
- break;
- default:
- return;
- }
- pdev->id = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
- {
- .start = AT91_MAGIC_PM_BASE,
- .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_I_BASE,
- .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_F_BASE,
- .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_DB_BASE,
- .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_REGS_BASE,
- .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_EXTPAGE_BASE,
- .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT572D940HF_ID_MSIRQ0,
- .end = AT572D940HF_ID_MSIRQ0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MHALT,
- .end = AT572D940HF_ID_MHALT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEXC,
- .end = AT572D940HF_ID_MEXC,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEDMA,
- .end = AT572D940HF_ID_MEDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mAgic_device = {
- .name = "mAgic",
- .id = -1,
- .num_resources = ARRAY_SIZE(mAgic_resources),
- .resource = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
- platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
// irq0 .. irq1
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
-void __init at91cap9_initialize(unsigned long main_clock)
+void __init at91cap9_map_io(void)
{
/* Map peripherals */
iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+}
+void __init at91cap9_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91cap9_reset;
pm_power_off = at91cap9_poweroff;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc0_device);
} else { /* MCI1 */
/* CLK */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
platform_device_register(&at91cap9_mmc1_device);
}
}
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
platform_device_register(&at91cap9_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all three TC channels */
- at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
platform_device_register(&at91cap9_tcb_device);
}
#else
case AT91CAP9_ID_SSC0:
pdev = &at91cap9_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91CAP9_ID_SSC1:
pdev = &at91cap9_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91cap9_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US0:
pdev = &at91cap9_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US1:
pdev = &at91cap9_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91CAP9_ID_US2:
pdev = &at91cap9_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91cap9_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
#include <mach/at91rm9200.h>
#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
+#include <mach/cpu.h>
#include "generic.h"
#include "clock.h"
// irq0 .. irq6
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91rm9200_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
}
+int rm9200_type;
+EXPORT_SYMBOL(rm9200_type);
+
+void __init at91rm9200_set_type(int type)
+{
+ rm9200_type = type;
+}
/* --------------------------------------------------------------------
* AT91RM9200 processor initialization
* -------------------------------------------------------------------- */
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+void __init at91rm9200_map_io(void)
{
/* Map peripherals */
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+}
+void __init at91rm9200_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91rm9200_reset;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
at91rm9200_register_clocks();
/* Initialize GPIO subsystem */
- at91_gpio_init(at91rm9200_gpio, banks);
+ at91_gpio_init(at91rm9200_gpio,
+ cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb0_device);
-
- at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
- at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
- at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
platform_device_register(&at91rm9200_tcb1_device);
}
#else
case AT91RM9200_ID_SSC0:
pdev = &at91rm9200_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC1:
pdev = &at91rm9200_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
break;
case AT91RM9200_ID_SSC2:
pdev = &at91rm9200_ssc2_device;
configure_ssc2_pins(pins);
- at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91rm9200_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US0:
pdev = &at91rm9200_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US1:
pdev = &at91rm9200_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US2:
pdev = &at91rm9200_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91RM9200_ID_US3:
pdev = &at91rm9200_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91rm9200_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq2
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
+};
+
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9260_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
-static void __init at91sam9xe_initialize(void)
+static void __init at91sam9xe_map_io(void)
{
unsigned long cidr, sram_size;
iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
}
-void __init at91sam9260_initialize(unsigned long main_clock)
+void __init at91sam9260_map_io(void)
{
/* Map peripherals */
iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
if (cpu_is_at91sam9xe())
- at91sam9xe_initialize();
+ at91sam9xe_map_io();
else if (cpu_is_at91sam9g20())
iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
else
iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+}
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9260_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb0_device);
-
- at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
- at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
- at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
platform_device_register(&at91sam9260_tcb1_device);
}
#else
case AT91SAM9260_ID_SSC:
pdev = &at91sam9260_ssc_device;
configure_ssc_pins(pins);
- at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9260_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US0:
pdev = &at91sam9260_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US1:
pdev = &at91sam9260_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US2:
pdev = &at91sam9260_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US3:
pdev = &at91sam9260_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US4:
pdev = &at91sam9260_uart4_device;
configure_usart4_pins();
- at91_clock_associate("usart4_clk", &pdev->dev, "usart");
break;
case AT91SAM9260_ID_US5:
pdev = &at91sam9260_uart5_device;
configure_usart5_pins();
- at91_clock_associate("usart5_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9260_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq2
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&hck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9261_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9261_initialize(unsigned long main_clock)
+void __init at91sam9261_map_io(void)
{
/* Map peripherals */
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
else
iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+}
-
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9261_poweroff;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9261_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9261_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
platform_device_register(&at91sam9261_tcb_device);
}
#else
case AT91SAM9261_ID_SSC0:
pdev = &at91sam9261_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9261_ID_SSC1:
pdev = &at91sam9261_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
case AT91SAM9261_ID_SSC2:
pdev = &at91sam9261_ssc2_device;
configure_ssc2_pins(pins);
- at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9261_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US0:
pdev = &at91sam9261_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US1:
pdev = &at91sam9261_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9261_ID_US2:
pdev = &at91sam9261_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9261_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0 .. irq1
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
/*
* The four programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
clk_register(&pck3);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9263_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9263_initialize(unsigned long main_clock)
+void __init at91sam9263_map_io(void)
{
/* Map peripherals */
iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+}
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9263_poweroff;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
platform_device_register(&at91sam9263_mmc0_device);
} else { /* MCI1 */
/* CLK */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
platform_device_register(&at91sam9263_mmc1_device);
}
}
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9263_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9263_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all three TC channels */
- at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
platform_device_register(&at91sam9263_tcb_device);
}
#else
case AT91SAM9263_ID_SSC0:
pdev = &at91sam9263_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9263_ID_SSC1:
pdev = &at91sam9263_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9263_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US0:
pdev = &at91sam9263_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US1:
pdev = &at91sam9263_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9263_ID_US2:
pdev = &at91sam9263_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9263_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
.type = CLK_TYPE_PERIPHERAL,
};
-/* One additional fake clock for ohci */
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 0,
- .type = CLK_TYPE_PERIPHERAL,
- .parent = &uhphs_clk,
-};
-
-/* One additional fake clock for second TC block */
-static struct clk tcb1_clk = {
- .name = "tcb1_clk",
- .pmc_mask = 0,
- .type = CLK_TYPE_PERIPHERAL,
- .parent = &tcb0_clk,
-};
-
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&udphs_clk,
&mmc1_clk,
// irq0
- &ohci_clk,
- &tcb1_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for ohci */
+ CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
};
/*
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
clk_register(&vdec_clk);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9g45_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9g45_initialize(unsigned long main_clock)
+void __init at91sam9g45_map_io(void)
{
/* Map peripherals */
iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+}
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91sam9g45_reset;
pm_power_off = at91sam9g45_poweroff;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
}
usbh_ehci_data = *data;
- at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
platform_device_register(&at91_usbh_ehci_device);
}
#else
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
}
mmc0_data = *data;
- at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
platform_device_register(&at91sam9g45_mmc0_device);
} else { /* MCI1 */
}
mmc1_data = *data;
- at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
platform_device_register(&at91sam9g45_mmc1_device);
}
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
- at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
platform_device_register(&at91sam9g45_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
- at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
platform_device_register(&at91sam9g45_spi1_device);
}
}
static void __init at91_add_device_tc(void)
{
- /* this chip has one clock and irq for all six TC channels */
- at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb0_device);
- at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb1_device);
}
#else
case AT91SAM9G45_ID_SSC0:
pdev = &at91sam9g45_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9G45_ID_SSC1:
pdev = &at91sam9g45_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9g45_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US0:
pdev = &at91sam9g45_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US1:
pdev = &at91sam9g45_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US2:
pdev = &at91sam9g45_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9G45_ID_US3:
pdev = &at91sam9g45_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9g45_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
// irq0
};
+static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
/*
* The two programmable clocks.
* You must configure pin multiplexing to bring these signals out.
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+ clkdev_add_table(usart_clocks_lookups,
+ ARRAY_SIZE(usart_clocks_lookups));
+
clk_register(&pck0);
clk_register(&pck1);
}
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9rl_set_console_clock(int id)
+{
+ if (id >= ARRAY_SIZE(usart_clocks_lookups))
+ return;
+
+ console_clock_lookup.con_id = "usart";
+ console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+ clkdev_add(&console_clock_lookup);
+}
+
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
* AT91SAM9RL processor initialization
* -------------------------------------------------------------------- */
-void __init at91sam9rl_initialize(unsigned long main_clock)
+void __init at91sam9rl_map_io(void)
{
unsigned long cidr, sram_size;
/* Map SRAM */
iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+}
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
at91_arch_reset = at91sam9_alt_reset;
pm_power_off = at91sam9rl_poweroff;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Pullup pin is handled internally by USB device peripheral */
- /* Clocks */
- at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
- at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
platform_device_register(&at91_usba_udc_device);
}
#else
static void __init at91_add_device_tc(void)
{
- /* this chip has a separate clock and irq for each TC channel */
- at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
- at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
- at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
platform_device_register(&at91sam9rl_tcb_device);
}
#else
case AT91SAM9RL_ID_SSC0:
pdev = &at91sam9rl_ssc0_device;
configure_ssc0_pins(pins);
- at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
break;
case AT91SAM9RL_ID_SSC1:
pdev = &at91sam9rl_ssc1_device;
configure_ssc1_pins(pins);
- at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
break;
default:
return;
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9rl_dbgu_device;
configure_dbgu_pins();
- at91_clock_associate("mck", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US0:
pdev = &at91sam9rl_uart0_device;
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US1:
pdev = &at91sam9rl_uart1_device;
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US2:
pdev = &at91sam9rl_uart2_device;
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &pdev->dev, "usart");
break;
case AT91SAM9RL_ID_US3:
pdev = &at91sam9rl_uart3_device;
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &pdev->dev, "usart");
break;
default:
return;
}
- pdev->id = portnr; /* update to mapped ID */
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
void __init at91_set_serial_console(unsigned portnr)
{
- if (portnr < ATMEL_MAX_UART)
+ if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
+ at91sam9rl_set_console_clock(portnr);
+ }
}
void __init at91_add_device_serial(void)
return AT91X40_MASTER_CLOCK;
}
-struct clk *clk_get(struct device *dev, const char *id)
-{
- return NULL;
-}
-
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/cpu.h>
#include "generic.h"
-static void __init onearm_map_io(void)
+static void __init onearm_init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ at91rm9200_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = onearm_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = onearm_init_early,
.init_irq = onearm_init_irq,
.init_machine = onearm_board_init,
MACHINE_END
#include "generic.h"
-static void __init afeb9260_map_io(void)
+static void __init afeb9260_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
MACHINE_START(AFEB9260, "Custom afeb9260 board")
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = afeb9260_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = afeb9260_init_early,
.init_irq = afeb9260_init_irq,
.init_machine = afeb9260_board_init,
MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ds1305.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init eb_map_io(void)
-{
- /* Initialize processor: 12.500 MHz crystal */
- at572d940hf_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US0, 1, 0);
-
- /* USART1 on ttyS2. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US1, 2, 0);
-
- /* USART2 on ttyS3. (Tx & Rx only */
- at91_register_uart(AT572D940HF_ID_US2, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init eb_init_irq(void)
-{
- at572d940hf_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata eb_usbh_data = {
- .ports = 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata eb_udc_data = {
- .vbus_pin = 0, /* no VBUS detection,UDC always on */
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata eb_mmc_data = {
- .wire4 = 1,
-/* .det_pin = ... not connected */
-/* .wp_pin = ... not connected */
-/* .vcc_pin = ... not connected */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata eb_eth_data = {
- .phy_irq_pin = AT91_PIN_PB25,
- .is_rmii = 1,
-};
-
-/*
- * NOR flash
- */
-
-static struct mtd_partition eb_nor_partitions[] = {
- {
- .name = "Raw Environment",
- .offset = 0,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- {
- .name = "OS FS",
- .offset = MTDPART_OFS_APPEND,
- .size = 3 * SZ_1M,
- .mask_flags = 0,
- },
- {
- .name = "APP FS",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static void nor_flash_set_vpp(struct map_info* mi, int i) {
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = eb_nor_partitions,
- .nr_parts = ARRAY_SIZE(eb_nor_partitions),
- .set_vpp = nor_flash_set_vpp,
-};
-
-static struct resource nor_flash_resources[] = {
- {
- .start = AT91_CHIPSELECT_0,
- .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata eb_nor_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 1,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 7,
- .nrd_pulse = 7,
- .ncs_write_pulse = 7,
- .nwe_pulse = 7,
-
- .read_cycle = 9,
- .write_cycle = 9,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
- .tdf_cycles = 1,
-};
-
-static void __init eb_add_device_nor(void)
-{
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, &eb_nor_smc_config);
- platform_device_register(&nor_flash);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata eb_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(eb_nand_partition);
- return eb_nand_partition;
-}
-
-static struct atmel_nand_data __initdata eb_nand_data = {
- .ale = 22,
- .cle = 21,
-/* .det_pin = ... not connected */
-/* .rdy_pin = AT91_PIN_PC16, */
- .enable_pin = AT91_PIN_PA15,
- .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata eb_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 12,
-};
-
-static void __init eb_add_device_nand(void)
-{
- /* setup bus-width (8 or 16) */
- if (eb_nand_data.bus_width_16)
- eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &eb_nand_smc_config);
-
- at91_add_device_nand(&eb_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = AT572D940HF_ID_IRQ1,
- .end = AT572D940HF_ID_IRQ1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct ds1305_platform_data ds1306_data = {
- .is_ds1306 = true,
- .en_1hz = false,
-};
-
-static struct spi_board_info eb_spi_devices[] = {
- { /* RTC Dallas DS1306 */
- .modalias = "rtc-ds1305",
- .chip_select = 3,
- .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
- .max_speed_hz = 500000,
- .bus_num = 0,
- .irq = AT572D940HF_ID_IRQ1,
- .platform_data = (void *) &ds1306_data,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* Dataflash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-};
-
-static void __init eb_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&eb_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NOR */
- eb_add_device_nor();
- /* NAND */
- eb_add_device_nand();
- /* SPI */
- at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &eb_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&eb_eth_data);
- /* mAgic */
- at91_add_device_mAgic();
-}
-
-MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
- /* Maintainer: Atmel <costa.antonior@gmail.com> */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91sam926x_timer,
- .map_io = eb_map_io,
- .init_irq = eb_init_irq,
- .init_machine = eb_board_init,
-MACHINE_END
#include "generic.h"
-static void __init cam60_map_io(void)
+static void __init cam60_init_early(void)
{
/* Initialize processor: 10 MHz crystal */
at91sam9260_initialize(10000000);
MACHINE_START(CAM60, "KwikByte CAM60")
/* Maintainer: KwikByte */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = cam60_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = cam60_init_early,
.init_irq = cam60_init_irq,
.init_machine = cam60_board_init,
MACHINE_END
#include <mach/gpio.h>
#include <mach/at91cap9_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
-static void __init cap9adk_map_io(void)
+static void __init cap9adk_init_early(void)
{
/* Initialize processor: 12 MHz crystal */
at91cap9_initialize(12000000);
// .rdy_pin = ... not connected
.enable_pin = AT91_PIN_PD15,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+ cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (cap9adk_nand_data.bus_width_16)
cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = cap9adk_map_io,
+ .map_io = at91cap9_map_io,
+ .init_early = cap9adk_init_early,
.init_irq = cap9adk_init_irq,
.init_machine = cap9adk_board_init,
MACHINE_END
#include "generic.h"
-static void __init carmeva_map_io(void)
+static void __init carmeva_init_early(void)
{
/* Initialize processor: 20.000 MHz crystal */
- at91rm9200_initialize(20000000, AT91RM9200_BGA);
+ at91rm9200_initialize(20000000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = carmeva_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = carmeva_init_early,
.init_irq = carmeva_init_irq,
.init_machine = carmeva_board_init,
MACHINE_END
#include "sam9_smc.h"
#include "generic.h"
-static void __init cpu9krea_map_io(void)
+static void __init cpu9krea_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
#endif
/* Maintainer: Eric Benard - EUKREA Electromatique */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = cpu9krea_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = cpu9krea_init_early,
.init_irq = cpu9krea_init_irq,
.init_machine = cpu9krea_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
#include "generic.h"
},
};
-static void __init cpuat91_map_io(void)
+static void __init cpuat91_init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ at91rm9200_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
MACHINE_START(CPUAT91, "Eukrea")
/* Maintainer: Eric Benard - EUKREA Electromatique */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = cpuat91_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = cpuat91_init_early,
.init_irq = cpuat91_init_irq,
.init_machine = cpuat91_board_init,
MACHINE_END
#include "generic.h"
-static void __init csb337_map_io(void)
+static void __init csb337_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400, AT91RM9200_BGA);
+ at91rm9200_initialize(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = csb337_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = csb337_init_early,
.init_irq = csb337_init_irq,
.init_machine = csb337_board_init,
MACHINE_END
#include "generic.h"
-static void __init csb637_map_io(void)
+static void __init csb637_init_early(void)
{
/* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400, AT91RM9200_BGA);
+ at91rm9200_initialize(3686400);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
MACHINE_START(CSB637, "Cogent CSB637")
/* Maintainer: Bill Gatliff */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = csb637_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = csb637_init_early,
.init_irq = csb637_init_irq,
.init_machine = csb637_board_init,
MACHINE_END
at91x40_init_interrupts(NULL);
}
-static void __init at91eb01_map_io(void)
+static void __init at91eb01_init_early(void)
{
at91x40_initialize(40000000);
}
MACHINE_START(AT91EB01, "Atmel AT91 EB01")
/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
.timer = &at91x40_timer,
+ .init_early = at91eb01_init_early,
.init_irq = at91eb01_init_irq,
- .map_io = at91eb01_map_io,
MACHINE_END
#include "generic.h"
-static void __init eb9200_map_io(void)
+static void __init eb9200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
+ at91rm9200_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = eb9200_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = eb9200_init_early,
.init_irq = eb9200_init_irq,
.init_machine = eb9200_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/cpu.h>
#include "generic.h"
-static void __init ecb_at91map_io(void)
+static void __init ecb_at91init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ at91rm9200_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
/* Maintainer: emQbit.com */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = ecb_at91map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = ecb_at91init_early,
.init_irq = ecb_at91init_irq,
.init_machine = ecb_at91board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
+
#include "generic.h"
-static void __init eco920_map_io(void)
+static void __init eco920_init_early(void)
{
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+ at91rm9200_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
.num_resources = 1,
};
-static struct resource at91_beeper_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TC3,
- .end = AT91RM9200_BASE_TC3 + 0x39,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device at91_beeper = {
- .name = "at91_beeper",
- .id = 0,
- .resource = at91_beeper_resources,
- .num_resources = ARRAY_SIZE(at91_beeper_resources),
-};
-
static struct spi_board_info eco920_spi_devices[] = {
{ /* CAN controller */
.modalias = "tlv5638",
AT91_SMC_TDF_(1) /* float time */
);
- at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
- at91_set_B_periph(AT91_PIN_PB6, 0);
- platform_device_register(&at91_beeper);
-
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
}
MACHINE_START(ECO920, "eco920")
/* Maintainer: Sascha Hauer */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = eco920_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = eco920_init_early,
.init_irq = eco920_init_irq,
.init_machine = eco920_board_init,
MACHINE_END
#include "generic.h"
-static void __init flexibity_map_io(void)
+static void __init flexibity_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
MACHINE_START(FLEXIBITY, "Flexibity Connect")
/* Maintainer: Maxim Osipov */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = flexibity_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = flexibity_init_early,
.init_irq = flexibity_init_irq,
.init_machine = flexibity_board_init,
MACHINE_END
*/
-static void __init foxg20_map_io(void)
+static void __init foxg20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
/* Maintainer: Sergio Tanzilli */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = foxg20_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = foxg20_init_early,
.init_irq = foxg20_init_irq,
.init_machine = foxg20_board_init,
MACHINE_END
#include "sam9_smc.h"
#include "generic.h"
-static void __init gsia18s_map_io(void)
+static void __init gsia18s_init_early(void)
{
- stamp9g20_map_io();
+ stamp9g20_init_early();
/*
* USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
}
MACHINE_START(GSIA18S, "GS_IA18_S")
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = gsia18s_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = gsia18s_init_early,
.init_irq = init_irq,
.init_machine = gsia18s_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
+#include <mach/cpu.h>
#include "generic.h"
-static void __init kafa_map_io(void)
+static void __init kafa_init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ at91rm9200_initialize(18432000);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
MACHINE_START(KAFA, "Sperry-Sun KAFA")
/* Maintainer: Sergei Sharonov */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = kafa_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = kafa_init_early,
.init_irq = kafa_init_irq,
.init_machine = kafa_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
-
+#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
#include "generic.h"
-static void __init kb9202_map_io(void)
+static void __init kb9202_init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 10 MHz crystal */
- at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+ at91rm9200_initialize(10000000);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
MACHINE_START(KB9200, "KB920x")
/* Maintainer: KwikByte, Inc. */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = kb9202_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = kb9202_init_early,
.init_irq = kb9202_init_irq,
.init_machine = kb9202_board_init,
MACHINE_END
#include "generic.h"
-static void __init neocore926_map_io(void)
+static void __init neocore926_init_early(void)
{
/* Initialize processor: 20 MHz crystal */
at91sam9263_initialize(20000000);
MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
/* Maintainer: ADENEO */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = neocore926_map_io,
+ .map_io = at91sam9263_map_io,
+ .init_early = neocore926_init_early,
.init_irq = neocore926_init_irq,
.init_machine = neocore926_board_init,
MACHINE_END
#include "generic.h"
-static void __init pcontrol_g20_map_io(void)
+static void __init pcontrol_g20_init_early(void)
{
- stamp9g20_map_io();
+ stamp9g20_init_early();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
MACHINE_START(PCONTROL_G20, "PControl G20")
/* Maintainer: pgsellmann@portner-elektronik.at */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = pcontrol_g20_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = pcontrol_g20_init_early,
.init_irq = init_irq,
.init_machine = pcontrol_g20_board_init,
MACHINE_END
#include "generic.h"
-static void __init picotux200_map_io(void)
+static void __init picotux200_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
+ at91rm9200_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
MACHINE_START(PICOTUX2XX, "picotux 200")
/* Maintainer: Kleinhenz Elektronik GmbH */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = picotux200_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = picotux200_init_early,
.init_irq = picotux200_init_irq,
.init_machine = picotux200_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91sam9260_initialize(12000000);
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include "generic.h"
-static void __init dk_map_io(void)
+static void __init dk_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
+ at91rm9200_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
/* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = dk_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = dk_init_early,
.init_irq = dk_init_irq,
.init_machine = dk_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
+ at91rm9200_initialize(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
/* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = ek_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
+ ek_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9261_initialize(18432000);
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
+ ek_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
#endif
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9261_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 16.367 MHz crystal */
at91sam9263_initialize(16367660);
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
+ ek_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9263_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
}
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
+ ek_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/gpio.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
#include "sam9_smc.h"
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91sam9g45_initialize(12000000);
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
+ ek_nand_data.bus_width_16 = !board_have_nand_8bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9g45_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91sam9rl_initialize(12000000);
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9rl_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
-static void __init snapper9260_map_io(void)
+static void __init snapper9260_init_early(void)
{
at91sam9260_initialize(18432000);
}
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = snapper9260_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = snapper9260_init_early,
.init_irq = snapper9260_init_irq,
.init_machine = snapper9260_board_init,
MACHINE_END
#include "generic.h"
-void __init stamp9g20_map_io(void)
+void __init stamp9g20_init_early(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
at91_set_serial_console(0);
}
-static void __init stamp9g20evb_map_io(void)
+static void __init stamp9g20evb_init_early(void)
{
- stamp9g20_map_io();
+ stamp9g20_init_early();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DCD | ATMEL_UART_RI);
}
-static void __init portuxg20_map_io(void)
+static void __init portuxg20_init_early(void)
{
- stamp9g20_map_io();
+ stamp9g20_init_early();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = portuxg20_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = portuxg20_init_early,
.init_irq = init_irq,
.init_machine = portuxg20_board_init,
MACHINE_END
MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = stamp9g20evb_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = stamp9g20evb_init_early,
.init_irq = init_irq,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91sam9260_initialize(12000000);
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9260_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include "generic.h"
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
{
/* Initialize processor: 12.00 MHz crystal */
at91sam9263_initialize(12000000);
MACHINE_START(USB_A9263, "CALAO USB_A9263")
/* Maintainer: calao-systems */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = ek_map_io,
+ .map_io = at91sam9263_map_io,
+ .init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_machine = ek_board_init,
MACHINE_END
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
#include "generic.h"
-static void __init yl9200_map_io(void)
+static void __init yl9200_init_early(void)
{
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
/* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+ at91rm9200_initialize(18432000);
/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
- .boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
- .map_io = yl9200_map_io,
+ .map_io = at91rm9200_map_io,
+ .init_early = yl9200_init_early,
.init_irq = yl9200_init_irq,
.init_machine = yl9200_board_init,
MACHINE_END
.parent = &pllb,
.mode = pmc_sys_mode,
};
-static struct clk utmi_clk = {
+struct clk utmi_clk = {
.name = "utmi_clk",
.parent = &main_clk,
.pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */
* memory, interfaces to on-chip peripherals, the AIC, and sometimes more
* (e.g baud rate generation). It's sourced from one of the primary clocks.
*/
-static struct clk mck = {
+struct clk mck = {
.name = "mck",
.pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
};
return NULL;
}
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
- struct clk *clk = clk_get(NULL, id);
-
- if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
- return;
-
- clk->function = func;
- clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *clk;
-
- list_for_each_entry(clk, &clocks, node) {
- if (strcmp(id, clk->name) == 0)
- return clk;
- if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
- return clk;
- }
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
/*------------------------------------------------------------------------*/
/* Register a new clock */
+static void __init at91_clk_add(struct clk *clk)
+{
+ list_add_tail(&clk->node, &clocks);
+
+ clk->cl.con_id = clk->name;
+ clk->cl.clk = clk;
+ clkdev_add(&clk->cl);
+}
+
int __init clk_register(struct clk *clk)
{
if (clk_is_peripheral(clk)) {
if (!clk->parent)
clk->parent = &mck;
clk->mode = pmc_periph_mode;
- list_add_tail(&clk->node, &clocks);
}
else if (clk_is_sys(clk)) {
clk->parent = &mck;
clk->mode = pmc_sys_mode;
-
- list_add_tail(&clk->node, &clocks);
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
else if (clk_is_programmable(clk)) {
clk->mode = pmc_sys_mode;
init_programmable_clock(clk);
- list_add_tail(&clk->node, &clocks);
}
#endif
+ at91_clk_add(clk);
+
return 0;
}
-
/*------------------------------------------------------------------------*/
static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
+ cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+ at91_clk_add(standard_pmc_clocks[i]);
if (cpu_has_pllb())
- list_add_tail(&pllb.node, &clocks);
+ at91_clk_add(&pllb);
if (cpu_has_uhp())
- list_add_tail(&uhpck.node, &clocks);
+ at91_clk_add(&uhpck);
if (cpu_has_udpfs())
- list_add_tail(&udpck.node, &clocks);
+ at91_clk_add(&udpck);
if (cpu_has_utmi())
- list_add_tail(&utmi_clk.node, &clocks);
+ at91_clk_add(&utmi_clk);
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
* published by the Free Software Foundation.
*/
+#include <linux/clkdev.h>
+
#define CLK_TYPE_PRIMARY 0x1
#define CLK_TYPE_PLL 0x2
#define CLK_TYPE_PROGRAMMABLE 0x4
struct clk {
struct list_head node;
const char *name; /* unique clock name */
- const char *function; /* function of the clock */
- struct device *dev; /* device associated with function */
+ struct clk_lookup cl;
unsigned long rate_hz;
struct clk *parent;
u32 pmc_mask;
extern int __init clk_register(struct clk *clk);
+extern struct clk mck;
+extern struct clk utmi_clk;
+
+#define CLKDEV_CON_ID(_id, _clk) \
+ { \
+ .con_id = _id, \
+ .clk = _clk, \
+ }
+
+#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \
+ { \
+ .con_id = _con_id, \
+ .dev_id = _dev_id, \
+ .clk = _clk, \
+ }
* published by the Free Software Foundation.
*/
+#include <linux/clkdev.h>
+
+ /* Map io */
+extern void __init at91rm9200_map_io(void);
+extern void __init at91sam9260_map_io(void);
+extern void __init at91sam9261_map_io(void);
+extern void __init at91sam9263_map_io(void);
+extern void __init at91sam9rl_map_io(void);
+extern void __init at91sam9g45_map_io(void);
+extern void __init at91x40_map_io(void);
+extern void __init at91cap9_map_io(void);
+
/* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91rm9200_set_type(int type);
+extern void __init at91rm9200_initialize(unsigned long main_clock);
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
-extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
-extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
/* Clocks */
extern int __init at91_clock_init(unsigned long main_clock);
+/*
+ * function to specify the clock of the default console. As we do not
+ * use the device/driver bus, the dev_name is not intialize. So we need
+ * to link the clock to a specific con_id only "usart"
+ */
+extern void __init at91rm9200_set_console_clock(int id);
+extern void __init at91sam9260_set_console_clock(int id);
+extern void __init at91sam9261_set_console_clock(int id);
+extern void __init at91sam9263_set_console_clock(int id);
+extern void __init at91sam9rl_set_console_clock(int id);
+extern void __init at91sam9g45_set_console_clock(int id);
+extern void __init at91cap9_set_console_clock(int id);
struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
/* Power Management */
extern void at91_irq_suspend(void);
+++ /dev/null
-/*
- * include/mach/at572d940hf.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef AT572D940HF_H
-#define AT572D940HF_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
-#define AT572D940HF_ID_US0 6 /* USART 0 */
-#define AT572D940HF_ID_US1 7 /* USART 1 */
-#define AT572D940HF_ID_US2 8 /* USART 2 */
-#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
-#define AT572D940HF_ID_UDP 10 /* USB Device Port */
-#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
-#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
-#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
-#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
-#define AT572D940HF_ID_UHP 20 /* USB Host port */
-#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
-#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
-#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
-#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
-#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
-#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
-#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
-#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
-#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
-#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
-#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT572D940HF_BASE_TCB 0xfffa0000
-#define AT572D940HF_BASE_TC0 0xfffa0000
-#define AT572D940HF_BASE_TC1 0xfffa0040
-#define AT572D940HF_BASE_TC2 0xfffa0080
-#define AT572D940HF_BASE_UDP 0xfffa4000
-#define AT572D940HF_BASE_MCI 0xfffa8000
-#define AT572D940HF_BASE_TWI0 0xfffac000
-#define AT572D940HF_BASE_US0 0xfffb0000
-#define AT572D940HF_BASE_US1 0xfffb4000
-#define AT572D940HF_BASE_US2 0xfffb8000
-#define AT572D940HF_BASE_SSC0 0xfffbc000
-#define AT572D940HF_BASE_SSC1 0xfffc0000
-#define AT572D940HF_BASE_SSC2 0xfffc4000
-#define AT572D940HF_BASE_SPI0 0xfffc8000
-#define AT572D940HF_BASE_SPI1 0xfffcc000
-#define AT572D940HF_BASE_SSC3 0xfffd0000
-#define AT572D940HF_BASE_TWI1 0xfffd4000
-#define AT572D940HF_BASE_EMAC 0xfffd8000
-#define AT572D940HF_BASE_CAN0 0xfffdc000
-#define AT572D940HF_BASE_CAN1 0xfffe0000
-#define AT91_BASE_SYS 0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT572D940HF_ID_US0
-#define AT91_USART1 AT572D940HF_ID_US1
-#define AT91_USART2 AT572D940HF_ID_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
-
-#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
-
-
-#endif
+++ /dev/null
-/*
- * include/mach//at572d940hf_matrix.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef AT572D940HF_MATRIX_H
-#define AT572D940HF_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
-#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
-#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
-#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
-#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
-#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
-#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
-#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
-#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
-#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
-#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
-#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
-#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
-#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
-#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
-#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
-
-
-/*
- * The following registers / bits are not defined in the Datasheet (Revision A)
- */
-
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-
-#endif
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-
#endif
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripheral */
#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller Interrupt */
#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */
#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */
#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */
#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-
#define CONSISTENT_DMA_SIZE SZ_4M
/*
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller */
#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
/*
* IRQ list.
*/
-#define AT91_ID_FIQ 0 /* FIQ */
-#define AT91_ID_SYS 1 /* System Peripheral */
#define AT91X40_ID_USART0 2 /* USART port 0 */
#define AT91X40_ID_USART1 3 /* USART port 1 */
#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
extern struct platform_device *atmel_default_console_device;
struct atmel_uart_data {
+ int num; /* port num */
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-#define ARCH_ID_AT572D940HF 0x0e0303e0
-
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
#endif
#ifdef CONFIG_ARCH_AT91RM9200
+extern int rm9200_type;
+#define ARCH_REVISON_9200_BGA (0 << 0)
+#define ARCH_REVISON_9200_PQFP (1 << 0)
#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp())
+#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP)
#else
#define cpu_is_at91rm9200() (0)
+#define cpu_is_at91rm9200_bga() (0)
+#define cpu_is_at91rm9200_pqfp() (0)
#endif
#ifdef CONFIG_ARCH_AT91SAM9260
#define cpu_is_at91cap9_revC() (0)
#endif
-#ifdef CONFIG_ARCH_AT572D940HF
-#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
-#else
-#define cpu_is_at572d940hf() (0)
-#endif
-
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
-#elif defined(CONFIG_ARCH_AT572D940HF)
-#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+
#ifdef CONFIG_MMU
/*
* Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
#define AT91_CHIPSELECT_6 0x70000000
#define AT91_CHIPSELECT_7 0x80000000
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
-#endif
-
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#include <mach/hardware.h>
-#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE)
-
#endif
#ifndef __MACH_STAMP9G20_H
#define __MACH_STAMP9G20_H
-void stamp9g20_map_io(void);
+void stamp9g20_init_early(void);
void stamp9g20_board_init(void);
#endif
--- /dev/null
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __ARCH_SYSTEM_REV_H__
+#define __ARCH_SYSTEM_REV_H__
+
+/*
+ * board revision encoding
+ * mach specific
+ * the 16-31 bit are reserved for at91 generic information
+ *
+ * bit 31:
+ * 0 => nand 16 bit
+ * 1 => nand 8 bit
+ */
+#define BOARD_HAVE_NAND_8BIT (1 << 31)
+static int inline board_have_nand_8bit(void)
+{
+ return system_rev & BOARD_HAVE_NAND_8BIT;
+}
+
+#endif /* __ARCH_SYSTEM_REV_H__ */
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-#elif defined(CONFIG_ARCH_AT572D940HF)
-
-#define AT572D940HF_MASTER_CLOCK 80000000
-#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
-
#endif
#endif
if (!pdata->cpupll_reg_base)
return -ENOMEM;
- pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K);
+ pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
if (!pdata->ddrpll_reg_base) {
ret = -ENOMEM;
goto no_ddrpll_mem;
#include "clock.h"
#define DA8XX_TPCC_BASE 0x01c00000
-#define DA850_MMCSD1_BASE 0x01e1b000
-#define DA850_TPCC1_BASE 0x01e30000
#define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400
-#define DA850_TPTC2_BASE 0x01e38000
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
-#define DA8XX_RTC_BASE 0x01C23000
+#define DA8XX_RTC_BASE 0x01c23000
+#define DA8XX_MMCSD0_BASE 0x01c40000
+#define DA8XX_SPI0_BASE 0x01c41000
+#define DA830_SPI1_BASE 0x01e12000
+#define DA8XX_LCD_CNTRL_BASE 0x01e13000
+#define DA850_MMCSD1_BASE 0x01e1b000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
#define DA8XX_EMAC_MDIO_BASE 0x01e24000
-#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
-#define DA8XX_SPI0_BASE 0x01c41000
-#define DA830_SPI1_BASE 0x01e12000
+#define DA850_TPCC1_BASE 0x01e30000
+#define DA850_TPTC2_BASE 0x01e38000
#define DA850_SPI1_BASE 0x01f0e000
+#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
#define DM365_MMCSD0_BASE 0x01D11000
#define DM365_MMCSD1_BASE 0x01D00000
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
+
static struct resource i2c_resources[] = {
{
.start = DAVINCI_I2C_BASE,
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
-#define DA8XX_LCD_CNTRL_BASE 0x01e13000
-#define DA8XX_PLL1_BASE 0x01e1a000
-#define DA8XX_MMCSD0_BASE 0x01c40000
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
-#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define DA8XX_ARM_RAM_BASE 0xffff0000
void __init da830_init(void);
*/
#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
-/* System control register offsets */
-#define DM64XX_VDD3P3V_PWDN 0x48
-
/*
* I/O mapping
*/
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S5P_DEV_USB_EHCI
select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select SAMSUNG_DEV_PWM
obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
--- /dev/null
+/* linux/arch/arm/mach-exynos4/cpuidle.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state);
+
+static struct cpuidle_state exynos4_cpuidle_set[] = {
+ [0] = {
+ .enter = exynos4_enter_idle,
+ .exit_latency = 1,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IDLE",
+ .desc = "ARM clock gating(WFI)",
+ },
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
+
+static struct cpuidle_driver exynos4_idle_driver = {
+ .name = "exynos4_idle",
+ .owner = THIS_MODULE,
+};
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ cpu_do_idle();
+
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+
+ return idle_time;
+}
+
+static int __init exynos4_init_cpuidle(void)
+{
+ int i, max_cpuidle_state, cpu_id;
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&exynos4_idle_driver);
+
+ for_each_cpu(cpu_id, cpu_online_mask) {
+ device = &per_cpu(exynos4_cpuidle_device, cpu_id);
+ device->cpu = cpu_id;
+
+ device->state_count = (sizeof(exynos4_cpuidle_set) /
+ sizeof(struct cpuidle_state));
+
+ max_cpuidle_state = device->state_count;
+
+ for (i = 0; i < max_cpuidle_state; i++) {
+ memcpy(&device->states[i], &exynos4_cpuidle_set[i],
+ sizeof(struct cpuidle_state));
+ }
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "CPUidle register device failed\n,");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+device_initcall(exynos4_init_cpuidle);
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <plat/sdhci.h>
#include <plat/ehci.h>
#include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
#include <mach/map.h>
/* Gyro, To be updated */
};
+/* TSP */
+static u8 mxt_init_vals[] = {
+ /* MXT_GEN_COMMAND(6) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_GEN_POWER(7) */
+ 0x20, 0xff, 0x32,
+ /* MXT_GEN_ACQUIRE(8) */
+ 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+ /* MXT_TOUCH_MULTI(9) */
+ 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00,
+ /* MXT_TOUCH_KEYARRAY(15) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+ 0x00,
+ /* MXT_SPT_GPIOPWM(19) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_GRIPFACE(20) */
+ 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+ 0x0f, 0x0a,
+ /* MXT_PROCG_NOISE(22) */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+ 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+ /* MXT_TOUCH_PROXIMITY(23) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_ONETOUCH(24) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_SELFTEST(25) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00,
+ /* MXT_PROCI_TWOTOUCH(27) */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* MXT_SPT_CTECONFIG(28) */
+ 0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
+};
+
+static struct mxt_platform_data mxt_platform_data = {
+ .config = mxt_init_vals,
+ .config_length = ARRAY_SIZE(mxt_init_vals),
+
+ .x_line = 18,
+ .y_line = 11,
+ .x_size = 1024,
+ .y_size = 600,
+ .blen = 0x1,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = MXT_DIAGONAL_COUNTER,
+ .irqflags = IRQF_TRIGGER_FALLING,
+};
+
+static struct s3c2410_platform_i2c i2c3_data __initdata = {
+ .flags = 0,
+ .bus_num = 3,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
+ .platform_data = &mxt_platform_data,
+ .irq = IRQ_EINT(4),
+ },
+};
+
+static void __init nuri_tsp_init(void)
+{
+ int gpio;
+
+ /* TOUCH_INT: XEINT_4 */
+ gpio = EXYNOS4_GPX0(4);
+ gpio_request(gpio, "TOUCH_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+}
+
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
/* max8997, To be updated */
&s3c_device_wdt,
&s3c_device_timer[0],
&s5p_device_ehci,
+ &s3c_device_i2c3,
/* NURI Devices */
&nuri_gpio_keys,
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
+ nuri_tsp_init();
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+ s3c_i2c3_set_platdata(&i2c3_data);
+ i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
nuri_ehci_init();
.flags = IORESOURCE_MEM,
},
.irq = { NETX_IRQ_LCD, NO_IRQ },
- .periphid = 0x10112400,
};
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
*/
static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
- s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
- s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
- s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
- s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
- s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(4);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI (0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI (0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO (0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI (0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI (0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO (0x04 << 16)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0 (0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1 (0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2 (0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3 (0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4 (0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5 (0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6 (0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7 (0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
-
-#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0 (0x02 << 0)
-#define S3C64XX_GPI1_VD1 (0x02 << 2)
-#define S3C64XX_GPI2_VD2 (0x02 << 4)
-#define S3C64XX_GPI3_VD3 (0x02 << 6)
-#define S3C64XX_GPI4_VD4 (0x02 << 8)
-#define S3C64XX_GPI5_VD5 (0x02 << 10)
-#define S3C64XX_GPI6_VD6 (0x02 << 12)
-#define S3C64XX_GPI7_VD7 (0x02 << 14)
-#define S3C64XX_GPI8_VD8 (0x02 << 16)
-#define S3C64XX_GPI9_VD9 (0x02 << 18)
-#define S3C64XX_GPI10_VD10 (0x02 << 20)
-#define S3C64XX_GPI11_VD11 (0x02 << 22)
-#define S3C64XX_GPI12_VD12 (0x02 << 24)
-#define S3C64XX_GPI13_VD13 (0x02 << 26)
-#define S3C64XX_GPI14_VD14 (0x02 << 28)
-#define S3C64XX_GPI15_VD15 (0x02 << 30)
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16 (0x02 << 0)
-#define S3C64XX_GPJ1_VD17 (0x02 << 2)
-#define S3C64XX_GPJ2_VD18 (0x02 << 4)
-#define S3C64XX_GPJ3_VD19 (0x02 << 6)
-#define S3C64XX_GPJ4_VD20 (0x02 << 8)
-#define S3C64XX_GPJ5_VD21 (0x02 << 10)
-#define S3C64XX_GPJ6_VD22 (0x02 << 12)
-#define S3C64XX_GPJ7_VD23 (0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22)
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0 (0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1 (0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2 (0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3 (0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4 (0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5 (0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6 (0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7 (0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8 (0x02 << 16)
-#define S3C64XX_GPN9_EINT9 (0x02 << 18)
-#define S3C64XX_GPN10_EINT10 (0x02 << 20)
-#define S3C64XX_GPN11_EINT11 (0x02 << 22)
-#define S3C64XX_GPN12_EINT12 (0x02 << 24)
-#define S3C64XX_GPN13_EINT13 (0x02 << 26)
-#define S3C64XX_GPN14_EINT14 (0x02 << 28)
-#define S3C64XX_GPN15_EINT15 (0x02 << 30)
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28)
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16)
-
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
-#include <mach/gpio-bank-f.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <mach/gpio-bank-n.h>
-
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
- u32 reg;
+ int i;
local_irq_save(flags);
- reg = __raw_readl(S3C64XX_GPNCON);
- reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
- S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
- reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
- S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
- __raw_writel(reg, S3C64XX_GPNCON);
-
- reg = __raw_readl(S3C64XX_GPNDAT);
- reg &= ~(clear << 12);
- reg |= set << 12;
- __raw_writel(reg, S3C64XX_GPNDAT);
-
+ for (i = 0; i < 4; i++) {
+ if (clear & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 0);
+ if (set & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 1);
+ }
local_irq_restore(flags);
}
#endif
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+ gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+ gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+ gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+ gpio_direction_output(S3C64XX_GPN(12), 0);
+ gpio_direction_output(S3C64XX_GPN(13), 0);
+ gpio_direction_output(S3C64XX_GPN(14), 0);
+ gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
return 0;
}
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
- s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
- s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
- s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
- s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
#define S3C64XX_VA_GPIO (0x0)
#include <mach/regs-gpio.h>
-#include <mach/gpio-bank-n.h>
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
ldr r2, =LL_UART /* for debug */
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
* as the uboot version supplied resets these to inputs during the
* resume checks.
+++ /dev/null
-# arch/arm/mach-s5p6442/Kconfig
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5P6442
-
-if ARCH_S5P6442
-
-config CPU_S5P6442
- bool
- select S3C_PL330_DMA
- help
- Enable S5P6442 CPU support
-
-config MACH_SMDK6442
- bool "SMDK6442"
- select CPU_S5P6442
- select S3C_DEV_WDT
- help
- Machine support for Samsung SMDK6442
-
-endif
+++ /dev/null
-# arch/arm/mach-s5p6442/Makefile
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S5P6442 system
-
-obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
-
-# device support
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+++ /dev/null
- zreladdr-y := 0x20008000
-params_phys-y := 0x20000100
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p6442.h>
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- .id = -1,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- .id = -1,
- },
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- .id = -1,
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-/* Possible clock sources for ARM Mux */
-static struct clk *clk_src_arm_list[] = {
- [1] = &clk_mout_apll.clk,
- [2] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_arm = {
- .sources = clk_src_arm_list,
- .nr_sources = ARRAY_SIZE(clk_src_arm_list),
-};
-
-static struct clksrc_clk clk_mout_arm = {
- .clk = {
- .name = "mout_arm",
- .id = -1,
- },
- .sources = &clk_src_arm,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-};
-
-static struct clk clk_dout_a2m = {
- .name = "dout_a2m",
- .id = -1,
- .parent = &clk_mout_apll.clk,
-};
-
-/* Possible clock sources for D0 Mux */
-static struct clk *clk_src_d0_list[] = {
- [1] = &clk_mout_mpll.clk,
- [2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d0 = {
- .sources = clk_src_d0_list,
- .nr_sources = ARRAY_SIZE(clk_src_d0_list),
-};
-
-static struct clksrc_clk clk_mout_d0 = {
- .clk = {
- .name = "mout_d0",
- .id = -1,
- },
- .sources = &clk_src_d0,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
-};
-
-static struct clk clk_dout_apll = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_arm.clk,
-};
-
-/* Possible clock sources for D0SYNC Mux */
-static struct clk *clk_src_d0sync_list[] = {
- [1] = &clk_mout_d0.clk,
- [2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d0sync = {
- .sources = clk_src_d0sync_list,
- .nr_sources = ARRAY_SIZE(clk_src_d0sync_list),
-};
-
-static struct clksrc_clk clk_mout_d0sync = {
- .clk = {
- .name = "mout_d0sync",
- .id = -1,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-};
-
-/* Possible clock sources for D1 Mux */
-static struct clk *clk_src_d1_list[] = {
- [1] = &clk_mout_mpll.clk,
- [2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d1 = {
- .sources = clk_src_d1_list,
- .nr_sources = ARRAY_SIZE(clk_src_d1_list),
-};
-
-static struct clksrc_clk clk_mout_d1 = {
- .clk = {
- .name = "mout_d1",
- .id = -1,
- },
- .sources = &clk_src_d1,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
-};
-
-/* Possible clock sources for D1SYNC Mux */
-static struct clk *clk_src_d1sync_list[] = {
- [1] = &clk_mout_d1.clk,
- [2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d1sync = {
- .sources = clk_src_d1sync_list,
- .nr_sources = ARRAY_SIZE(clk_src_d1sync_list),
-};
-
-static struct clksrc_clk clk_mout_d1sync = {
- .clk = {
- .name = "mout_d1sync",
- .id = -1,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-};
-
-static struct clk clk_hclkd0 = {
- .name = "hclkd0",
- .id = -1,
- .parent = &clk_mout_d0sync.clk,
-};
-
-static struct clk clk_hclkd1 = {
- .name = "hclkd1",
- .id = -1,
- .parent = &clk_mout_d1sync.clk,
-};
-
-static struct clk clk_pclkd0 = {
- .name = "pclkd0",
- .id = -1,
- .parent = &clk_hclkd0,
-};
-
-static struct clk clk_pclkd1 = {
- .name = "pclkd1",
- .id = -1,
- .parent = &clk_hclkd1,
-};
-
-int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
-}
-
-int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "dout_a2m",
- .id = -1,
- .parent = &clk_mout_apll.clk,
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
- }, {
- .clk = {
- .name = "dout_apll",
- .id = -1,
- .parent = &clk_mout_arm.clk,
- },
- .sources = &clk_src_arm,
- .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
- }, {
- .clk = {
- .name = "hclkd1",
- .id = -1,
- .parent = &clk_mout_d1sync.clk,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "hclkd0",
- .id = -1,
- .parent = &clk_mout_d0sync.clk,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "pclkd0",
- .id = -1,
- .parent = &clk_hclkd0,
- },
- .sources = &clk_src_d0sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
- }, {
- .clk = {
- .name = "pclkd1",
- .id = -1,
- .parent = &clk_hclkd1,
- },
- .sources = &clk_src_d1sync,
- .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
- }
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_mpll,
- &clk_mout_epll,
- &clk_mout_arm,
- &clk_mout_d0,
- &clk_mout_d0sync,
- &clk_mout_d1,
- &clk_mout_d1sync,
-};
-
-void __init_or_cpufreq s5p6442_setup_clocks(void)
-{
- struct clk *pclkd0_clk;
- struct clk *pclkd1_clk;
-
- unsigned long xtal;
- unsigned long arm;
- unsigned long hclkd0 = 0;
- unsigned long hclkd1 = 0;
- unsigned long pclkd0 = 0;
- unsigned long pclkd1 = 0;
-
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal = clk_get_rate(&clk_xtal);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
- epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
- printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
- apll, mpll, epll);
-
- clk_fout_apll.rate = apll;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-
- arm = clk_get_rate(&clk_dout_apll);
- hclkd0 = clk_get_rate(&clk_hclkd0);
- hclkd1 = clk_get_rate(&clk_hclkd1);
-
- pclkd0_clk = clk_get(NULL, "pclkd0");
- BUG_ON(IS_ERR(pclkd0_clk));
-
- pclkd0 = clk_get_rate(pclkd0_clk);
- clk_put(pclkd0_clk);
-
- pclkd1_clk = clk_get(NULL, "pclkd1");
- BUG_ON(IS_ERR(pclkd1_clk));
-
- pclkd1 = clk_get_rate(pclkd1_clk);
- clk_put(pclkd1_clk);
-
- printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
- hclkd0, hclkd1, pclkd0, pclkd1);
-
- /* For backward compatibility */
- clk_f.rate = arm;
- clk_h.rate = hclkd1;
- clk_p.rate = pclkd1;
-
- clk_pclkd0.rate = pclkd0;
- clk_pclkd1.rate = pclkd1;
-}
-
-static struct clk init_clocks_off[] = {
- {
- .name = "pdma",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- },
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "systimer",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<16),
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<17),
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<18),
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<19),
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_pclkd1,
- .enable = s5p6442_clk_ip3_ctrl,
- .ctrlbit = (1<<23),
- },
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_mout_apll.clk,
- &clk_mout_mpll.clk,
- &clk_mout_epll.clk,
- &clk_mout_d0.clk,
- &clk_mout_d0sync.clk,
- &clk_mout_d1.clk,
- &clk_mout_d1sync.clk,
- &clk_hclkd0,
- &clk_pclkd0,
- &clk_hclkd1,
- &clk_pclkd1,
-};
-
-void __init s5p6442_register_clocks(void)
-{
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- s3c_pwmclk_init();
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6442.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p6442_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P6442_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC2,
- .pfn = __phys_to_pfn(S5P6442_PA_VIC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }
-};
-
-static void s5p6442_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-/*
- * s5p6442_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5p6442_map_io(void)
-{
- iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
-}
-
-void __init s5p6442_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6442_register_clocks();
- s5p6442_setup_clocks();
-}
-
-void __init s5p6442_init_irq(void)
-{
- /* S5P6442 supports 3 VIC */
- u32 vic[3];
-
- /* VIC0, VIC1, and VIC2: some interrupt reserved */
- vic[0] = 0x7fefffff;
- vic[1] = 0X7f389c81;
- vic[2] = 0X1bbbcfff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6442_sysclass = {
- .name = "s5p6442-core",
-};
-
-static struct sys_device s5p6442_sysdev = {
- .cls = &s5p6442_sysclass,
-};
-
-static int __init s5p6442_core_init(void)
-{
- return sysdev_class_register(&s5p6442_sysclass);
-}
-
-core_initcall(s5p6442_core_init);
-
-int __init s5p6442_init(void)
-{
- printk(KERN_INFO "S5P6442: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5p6442_idle;
-
- return sysdev_register(&s5p6442_sysdev);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6442_cfg_i2s(struct platform_device *pdev)
-{
- unsigned int base;
-
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 1:
- base = S5P6442_GPC1(0);
- break;
-
- case 0:
- base = S5P6442_GPC0(0);
- break;
-
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
- return 0;
-}
-
-static const char *rclksrc_v35[] = {
- [0] = "busclk",
- [1] = "i2sclk",
-};
-
-static struct s3c_audio_pdata i2sv35_pdata = {
- .cfg_gpio = s5p6442_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
- .src_clk = rclksrc_v35,
- },
- },
-};
-
-static struct resource s5p6442_iis0_resource[] = {
- [0] = {
- .start = S5P6442_PA_I2S0,
- .end = S5P6442_PA_I2S0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S0_TX,
- .end = DMACH_I2S0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S0_RX,
- .end = DMACH_I2S0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DMACH_I2S0S_TX,
- .end = DMACH_I2S0S_TX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_iis0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_iis0_resource),
- .resource = s5p6442_iis0_resource,
- .dev = {
- .platform_data = &i2sv35_pdata,
- },
-};
-
-static const char *rclksrc_v3[] = {
- [0] = "iis",
- [1] = "sclk_audio",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = s5p6442_cfg_i2s,
- .type = {
- .i2s = {
- .src_clk = rclksrc_v3,
- },
- },
-};
-
-static struct resource s5p6442_iis1_resource[] = {
- [0] = {
- .start = S5P6442_PA_I2S1,
- .end = S5P6442_PA_I2S1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_I2S1_TX,
- .end = DMACH_I2S1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_I2S1_RX,
- .end = DMACH_I2S1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_iis1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6442_iis1_resource),
- .resource = s5p6442_iis1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6442_GPC0(0);
- break;
-
- case 1:
- base = S5P6442_GPC1(0);
- break;
-
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = s5p6442_pcm_cfg_gpio,
-};
-
-static struct resource s5p6442_pcm0_resource[] = {
- [0] = {
- .start = S5P6442_PA_PCM0,
- .end = S5P6442_PA_PCM0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM0_TX,
- .end = DMACH_PCM0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM0_RX,
- .end = DMACH_PCM0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource),
- .resource = s5p6442_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource s5p6442_pcm1_resource[] = {
- [0] = {
- .start = S5P6442_PA_PCM1,
- .end = S5P6442_PA_PCM1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_PCM1_TX,
- .end = DMACH_PCM1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_PCM1_RX,
- .end = DMACH_PCM1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device s5p6442_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource),
- .resource = s5p6442_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
- [S5P6442_SPI_SRCCLK_PCLK] = "pclk",
- [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct resource s5p6442_spi0_resource[] = {
- [0] = {
- .start = S5P6442_PA_SPI,
- .end = S5P6442_PA_SPI + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
- .cfg_gpio = s5p6442_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6442_device_spi = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p6442_spi0_resource),
- .resource = s5p6442_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5p6442_spi0_pdata,
- },
-};
-
-void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5p6442_spi0_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource s5p6442_pdma_resource[] = {
- [0] = {
- .start = S5P6442_PA_PDMA,
- .end = S5P6442_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PDMA,
- .end = IRQ_PDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
- .peri = {
- [0] = DMACH_UART0_RX,
- [1] = DMACH_UART0_TX,
- [2] = DMACH_UART1_RX,
- [3] = DMACH_UART1_TX,
- [4] = DMACH_UART2_RX,
- [5] = DMACH_UART2_TX,
- [6] = DMACH_MAX,
- [7] = DMACH_MAX,
- [8] = DMACH_MAX,
- [9] = DMACH_I2S0_RX,
- [10] = DMACH_I2S0_TX,
- [11] = DMACH_I2S0S_TX,
- [12] = DMACH_I2S1_RX,
- [13] = DMACH_I2S1_TX,
- [14] = DMACH_MAX,
- [15] = DMACH_MAX,
- [16] = DMACH_SPI0_RX,
- [17] = DMACH_SPI0_TX,
- [18] = DMACH_MAX,
- [19] = DMACH_MAX,
- [20] = DMACH_PCM0_RX,
- [21] = DMACH_PCM0_TX,
- [22] = DMACH_PCM1_RX,
- [23] = DMACH_PCM1_TX,
- [24] = DMACH_MAX,
- [25] = DMACH_MAX,
- [26] = DMACH_MAX,
- [27] = DMACH_MSM_REQ0,
- [28] = DMACH_MSM_REQ1,
- [29] = DMACH_MSM_REQ2,
- [30] = DMACH_MSM_REQ3,
- [31] = DMACH_MAX,
- },
-};
-
-static struct platform_device s5p6442_device_pdma = {
- .name = "s3c-pl330",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p6442_pdma_resource),
- .resource = s5p6442_pdma_resource,
- .dev = {
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5p6442_pdma_pdata,
- },
-};
-
-static struct platform_device *s5p6442_dmacs[] __initdata = {
- &s5p6442_device_pdma,
-};
-
-static int __init s5p6442_dma_init(void)
-{
- platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
-
- return 0;
-}
-arch_initcall(s5p6442_dma_init);
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
- .macro addruart, rp, rv
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
- add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
- add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
- .endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
+++ /dev/null
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5P6442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =VA_VIC0
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- @ check the vic0
- mov \irqnr, # S5P_IRQ_OFFSET + 31
- ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
- teq \irqstat, #0
-
- @ otherwise try vic1
- addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- @ otherwise try vic2
- addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
- addeq \irqnr, \irqnr, #32
- ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
- teqeq \irqstat, #0
-
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6442_GPIO_A0_NR (8)
-#define S5P6442_GPIO_A1_NR (2)
-#define S5P6442_GPIO_B_NR (4)
-#define S5P6442_GPIO_C0_NR (5)
-#define S5P6442_GPIO_C1_NR (5)
-#define S5P6442_GPIO_D0_NR (2)
-#define S5P6442_GPIO_D1_NR (6)
-#define S5P6442_GPIO_E0_NR (8)
-#define S5P6442_GPIO_E1_NR (5)
-#define S5P6442_GPIO_F0_NR (8)
-#define S5P6442_GPIO_F1_NR (8)
-#define S5P6442_GPIO_F2_NR (8)
-#define S5P6442_GPIO_F3_NR (6)
-#define S5P6442_GPIO_G0_NR (7)
-#define S5P6442_GPIO_G1_NR (7)
-#define S5P6442_GPIO_G2_NR (7)
-#define S5P6442_GPIO_H0_NR (8)
-#define S5P6442_GPIO_H1_NR (8)
-#define S5P6442_GPIO_H2_NR (8)
-#define S5P6442_GPIO_H3_NR (8)
-#define S5P6442_GPIO_J0_NR (8)
-#define S5P6442_GPIO_J1_NR (6)
-#define S5P6442_GPIO_J2_NR (8)
-#define S5P6442_GPIO_J3_NR (8)
-#define S5P6442_GPIO_J4_NR (5)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P6442_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
- S5P6442_GPIO_A0_START = 0,
- S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
- S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
- S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
- S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
- S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
- S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
- S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
- S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
- S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
- S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
- S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
- S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
- S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
- S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
- S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
- S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
- S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
- S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
- S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
- S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
- S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
- S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
- S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
- S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
-};
-
-/* S5P6442 GPIO number definitions. */
-#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr))
-#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr))
-#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr))
-#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr))
-#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr))
-#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr))
-#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr))
-#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr))
-#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr))
-#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr))
-#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr))
-#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr))
-#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr))
-#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr))
-#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr))
-#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr))
-#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr))
-#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr))
-#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr))
-#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr))
-#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr))
-#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr))
-#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr))
-#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr))
-#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr))
-
-/* the end of the S5P6442 specific gpios */
-#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
-#define S3C_GPIO_END S5P6442_GPIO_END
-
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \
- CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/* arch/arm/mach-s5p6442/include/mach/io.h
- *
- * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S5P6442
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
-#define IRQ_BATF S5P_IRQ_VIC0(17)
-#define IRQ_MDMA S5P_IRQ_VIC0(18)
-#define IRQ_PDMA S5P_IRQ_VIC0(19)
-#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
-#define IRQ_WDT S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
-
-/* VIC1 */
-#define IRQ_PMU S5P_IRQ_VIC1(0)
-#define IRQ_ONENAND S5P_IRQ_VIC1(7)
-#define IRQ_UART0 S5P_IRQ_VIC1(10)
-#define IRQ_UART1 S5P_IRQ_VIC1(11)
-#define IRQ_UART2 S5P_IRQ_VIC1(12)
-#define IRQ_SPI0 S5P_IRQ_VIC1(15)
-#define IRQ_IIC S5P_IRQ_VIC1(19)
-#define IRQ_IIC1 S5P_IRQ_VIC1(20)
-#define IRQ_IIC2 S5P_IRQ_VIC1(21)
-#define IRQ_OTG S5P_IRQ_VIC1(24)
-#define IRQ_MSM S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
-#define IRQ_COMMRX S5P_IRQ_VIC1(29)
-#define IRQ_COMMTX S5P_IRQ_VIC1(30)
-
-/* VIC2 */
-#define IRQ_LCD0 S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
-#define IRQ_JPEG S5P_IRQ_VIC2(8)
-#define IRQ_3D S5P_IRQ_VIC2(10)
-#define IRQ_Mixer S5P_IRQ_VIC2(11)
-#define IRQ_MFC S5P_IRQ_VIC2(14)
-#define IRQ_TVENC S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 S5P_IRQ_VIC2(17)
-#define IRQ_RP S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 S5P_IRQ_VIC2(21)
-#define IRQ_ADC S5P_IRQ_VIC2(23)
-#define IRQ_PENDN S5P_IRQ_VIC2(24)
-#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
-#define IRQ_SSS_INT S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH S5P_IRQ_VIC2(28)
-#define IRQ_VIC_END S5P_IRQ_VIC2(31)
-
-#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_EINT(31) + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6442_PA_SDRAM 0x20000000
-
-#define S5P6442_PA_I2S0 0xC0B00000
-#define S5P6442_PA_I2S1 0xF2200000
-
-#define S5P6442_PA_CHIPID 0xE0000000
-
-#define S5P6442_PA_SYSCON 0xE0100000
-
-#define S5P6442_PA_GPIO 0xE0200000
-
-#define S5P6442_PA_VIC0 0xE4000000
-#define S5P6442_PA_VIC1 0xE4100000
-#define S5P6442_PA_VIC2 0xE4200000
-
-#define S5P6442_PA_SROMC 0xE7000000
-
-#define S5P6442_PA_MDMA 0xE8000000
-#define S5P6442_PA_PDMA 0xE9000000
-
-#define S5P6442_PA_TIMER 0xEA000000
-
-#define S5P6442_PA_SYSTIMER 0xEA100000
-
-#define S5P6442_PA_WATCHDOG 0xEA200000
-
-#define S5P6442_PA_UART 0xEC000000
-
-#define S5P6442_PA_IIC0 0xEC100000
-
-#define S5P6442_PA_SPI 0xEC300000
-
-#define S5P6442_PA_PCM0 0xF2400000
-#define S5P6442_PA_PCM1 0xF2500000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_IIC S5P6442_PA_IIC0
-#define S3C_PA_WDT S5P6442_PA_WATCHDOG
-
-#define S5P_PA_CHIPID S5P6442_PA_CHIPID
-#define S5P_PA_SDRAM S5P6442_PA_SDRAM
-#define S5P_PA_SROMC S5P6442_PA_SROMC
-#define S5P_PA_SYSCON S5P6442_PA_SYSCON
-#define S5P_PA_TIMER S5P6442_PA_TIMER
-
-/* UART */
-
-#define S3C_PA_UART S5P6442_PA_UART
-
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-
-#define S5P_SZ_UART SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6442 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
- return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
- return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
- return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
- return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
-#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
-
-#define S5P_APLL_CON S5P_CLKREG(0x100)
-#define S5P_MPLL_CON S5P_CLKREG(0x108)
-#define S5P_EPLL_CON S5P_CLKREG(0x110)
-#define S5P_VPLL_CON S5P_CLKREG(0x120)
-
-#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
-#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
-#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
-#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
-
-#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
-#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
-
-#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
-#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
-#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
-
-#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
-#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
-
-/* CLK_OUT */
-#define S5P_CLK_OUT_SHIFT (12)
-#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT)
-#define S5P_CLK_OUT S5P_CLKREG(0x500)
-
-#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000)
-#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004)
-
-#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100)
-#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104)
-
-#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
-
-/* Register Bit definition */
-#define S5P_EPLL_EN (1<<31)
-#define S5P_EPLL_MASK 0xffffffff
-#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_APLL_SHIFT (0)
-#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
-#define S5P_CLKDIV0_A2M_SHIFT (4)
-#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
-#define S5P_CLKDIV0_D0CLK_SHIFT (16)
-#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT)
-#define S5P_CLKDIV0_P0CLK_SHIFT (20)
-#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
-#define S5P_CLKDIV0_D1CLK_SHIFT (24)
-#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT)
-#define S5P_CLKDIV0_P1CLK_SHIFT (28)
-#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
-
-/* Clock MUX status Registers */
-#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0)
-#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4)
-#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8)
-#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12)
-#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16)
-#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20)
-#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24)
-#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
-#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24)
-#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
-#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28)
-#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6442_PLAT_SPI_CLKS_H
-#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6442_SPI_SRCCLK_PCLK 0
-#define S5P6442_SPI_SRCCLK_SCLK 1
-
-#endif /* __S5P6442_PLAT_SPI_CLKS_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/system-reset.h>
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5P6442 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
+++ /dev/null
-/* arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S5P6442 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5P6442 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
- /* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
+++ /dev/null
-/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S5P6442 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6442.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
- [0] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5p6442_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
- }
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/s5p6442.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK6442_UCON_DEFAULT,
- .ulcon = SMDK6442_ULCON_DEFAULT,
- .ufcon = SMDK6442_UFCON_DEFAULT,
- },
-};
-
-static struct platform_device *smdk6442_devices[] __initdata = {
- &s3c_device_i2c0,
- &samsung_asoc_dma,
- &s5p6442_device_iis0,
- &s3c_device_wdt,
-};
-
-static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = {
- { I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static void __init smdk6442_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(12000000);
- s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
-}
-
-static void __init smdk6442_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, smdk6442_i2c_devs0,
- ARRAY_SIZE(smdk6442_i2c_devs0));
- platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
-}
-
-MACHINE_START(SMDK6442, "SMDK6442")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
- .init_irq = s5p6442_init_irq,
- .map_io = smdk6442_map_io,
- .init_machine = smdk6442_machine_init,
- .timer = &s3c24xx_timer,
-MACHINE_END
+++ /dev/null
-/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
gpio_direction_output(sdi0_vsel, 0);
gpio_direction_output(sdi0_en, 1);
- /* Add the device */
- db8500_add_sdi0(&mop500_sdi0_data);
+ /* Add the device, force v2 to subrevision 1 */
+ if (cpu_is_u8500v2())
+ db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
+ else
+ db8500_add_sdi0(&mop500_sdi0_data, 0);
}
void mop500_sdi_tc35892_init(void)
void __init mop500_sdi_init(void)
{
+ u32 periphid = 0;
+
+ /* v2 has a new version of this block that need to be forced */
+ if (cpu_is_u8500v2())
+ periphid = 0x10480180;
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- db8500_add_sdi2(&mop500_sdi2_data);
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data);
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
if (machine_is_hrefv60()) {
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
static inline struct amba_device *
dbx500_add_spi(const char *name, resource_size_t base, int irq,
- struct spi_master_cntlr *pdata)
+ struct spi_master_cntlr *pdata,
+ u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(name, base, irq, pdata, periphid);
}
struct mmci_platform_data;
static inline struct amba_device *
dbx500_add_sdi(const char *name, resource_size_t base, int irq,
- struct mmci_platform_data *pdata)
+ struct mmci_platform_data *pdata,
+ u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(name, base, irq, pdata, periphid);
}
struct amba_pl011_data;
ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
#define db5500_add_sdi0(pdata) \
- dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata)
+ dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+ 0x10480180)
#define db5500_add_sdi1(pdata) \
- dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata)
+ dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+ 0x10480180)
#define db5500_add_sdi2(pdata) \
- dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata)
+ dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+ 0x10480180)
#define db5500_add_sdi3(pdata) \
- dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata)
+ dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+ 0x10480180)
#define db5500_add_sdi4(pdata) \
- dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata)
+ dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+ 0x10480180)
+/* This one has a bad peripheral ID in the U5500 silicon */
#define db5500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata)
+ dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+ 0x10080023)
#define db5500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata)
+ dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+ 0x10080023)
#define db5500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata)
+ dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+ 0x10080023)
#define db5500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata)
+ dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+ 0x10080023)
#define db5500_add_uart0(plat) \
dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
db8500_add_ssp(const char *name, resource_size_t base, int irq,
struct pl022_ssp_controller *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID);
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
}
#define db8500_add_usb(rx_cfg, tx_cfg) \
ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-#define db8500_add_sdi0(pdata) \
- dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata)
-#define db8500_add_sdi1(pdata) \
- dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata)
-#define db8500_add_sdi2(pdata) \
- dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata)
-#define db8500_add_sdi3(pdata) \
- dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata)
-#define db8500_add_sdi4(pdata) \
- dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata)
-#define db8500_add_sdi5(pdata) \
- dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata)
+#define db8500_add_sdi0(pdata, pid) \
+ dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(pdata, pid) \
+ dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(pdata, pid) \
+ dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(pdata, pid) \
+ dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(pdata, pid) \
+ dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(pdata, pid) \
+ dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
#define db8500_add_ssp0(pdata) \
db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
#define db8500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata)
+ dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
#define db8500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata)
+ dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
#define db8500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata)
+ dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
#define db8500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata)
+ dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
#define db8500_add_uart0(pdata) \
dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
-/* ST-Ericsson modified pl022 id */
-#define SSP_PER_ID 0x01080022
-
#ifndef __ASSEMBLY__
#include <mach/id.h>
*/
ENTRY(v6_flush_kern_dcache_area)
add r1, r0, r1
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
ENTRY(v7_flush_kern_dcache_area)
dcache_line_size r2, r3
add r1, r0, r1
+ sub r3, r2, #1
+ bic r0, r0, r3
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
add r0, r0, r2
/*
* We fork()ed a process, and we need a new context for the child
- * to run in. We reserve version 0 for initial tasks so we will
- * always allocate an ASID. The ASID 0 is reserved for the TTBR
- * register changing sequence.
+ * to run in.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
static void flush_context(void)
{
- /* set the reserved ASID before flushing the TLB */
- asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+ u32 ttb;
+ /* Copy TTBR1 into TTBR0 */
+ asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
+ "mcr p15, 0, %0, c2, c0, 0"
+ : "=r" (ttb));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
return;
smp_rmb();
- asid = cpu_last_asid + cpu + 1;
+ asid = cpu_last_asid + cpu;
flush_context();
set_mm_context(mm, asid);
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = cpu_last_asid + smp_processor_id() + 1;
+ asid = cpu_last_asid + smp_processor_id();
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
- cpu_last_asid += NR_CPUS;
+ cpu_last_asid += NR_CPUS - 1;
}
set_mm_context(mm, asid);
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
+#include <linux/of_fdt.h>
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/sort.h>
#include <asm/mach-types.h>
+#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
__tagtable(ATAG_INITRD2, parse_tag_initrd2);
+#ifdef CONFIG_OF_FLATTREE
+void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end)
+{
+ phys_initrd_start = start;
+ phys_initrd_size = end - start;
+}
+#endif /* CONFIG_OF_FLATTREE */
+
/*
* This keeps memory configuration data used by a couple memory
* initialization functions, as well as show_mem() for the skipping
free_area_init_node(0, zone_size, min, zhole_size);
}
-#ifndef CONFIG_SPARSEMEM
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
return memblock_is_memory(pfn << PAGE_SHIFT);
}
EXPORT_SYMBOL(pfn_valid);
+#endif
+#ifndef CONFIG_SPARSEMEM
static void arm_memory_present(void)
{
}
#endif
arm_mm_memblock_reserve();
+ arm_dt_memblock_reserve();
/* reserve any platform specific memblock areas */
if (mdesc->reserve)
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
- return pmd_offset(pud_offset(pgd, virt), virt);
-}
-
static inline pmd_t *pmd_off_k(unsigned long virt)
{
- return pmd_off(pgd_offset_k(virt), virt);
+ return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
}
struct mem_type {
{
int i, j, highmem = 0;
- lowmem_limit = __pa(vmalloc_min - 1) + 1;
- memblock_set_current_limit(lowmem_limit);
-
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
#ifdef CONFIG_HIGHMEM
- if (__va(bank->start) > vmalloc_min ||
+ if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET)
highmem = 1;
bank->size = newsize;
}
#endif
+ if (!bank->highmem && bank->start + bank->size > lowmem_limit)
+ lowmem_limit = bank->start + bank->size;
+
j++;
}
#ifdef CONFIG_HIGHMEM
}
#endif
meminfo.nr_banks = j;
+ memblock_set_current_limit(lowmem_limit);
}
static inline void prepare_page_table(void)
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
- mcr p15, 0, r4, c2, c0, 1 @ load TTB1
+ ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
+ ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
+ mcr p15, 0, r8, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
adr r5, v6_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
-#ifdef CONFIG_ARM_ERRATA_754322
- dsb
-#endif
- mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
- isb
-1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+ mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
+ mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
+ mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+ isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
- mcr p15, 0, r4, c2, c0, 1 @ load TTB1
+ ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP)
+ ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
+ mcr p15, 0, r8, c2, c0, 1 @ load TTB1
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
config PLAT_S5P
bool
- depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
default y
select ARM_VIC if !ARCH_EXYNOS4
select ARM_GIC if ARCH_EXYNOS4
#include <plat/cpu.h>
#include <plat/s5p6440.h>
-#include <plat/s5p6442.h>
#include <plat/s5p6450.h>
#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6442[] = "S5P6442";
static const char name_s5p6450[] = "S5P6450";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
- }, {
- .idcode = 0x36442000,
- .idmask = 0xfffff000,
- .map_io = s5p6442_map_io,
- .init_clocks = s5p6442_init_clocks,
- .init_uarts = s5p6442_init_uarts,
- .init = s5p6442_init,
- .name = name_s5p6442,
}, {
.idcode = 0x36450000,
.idmask = 0xfffff000,
+++ /dev/null
-/* arch/arm/plat-s5p/include/plat/s5p6442.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p6442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6442 related SoCs */
-
-extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5p6442_register_clocks(void);
-extern void s5p6442_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6442
-
-extern int s5p6442_init(void);
-extern void s5p6442_init_irq(void);
-extern void s5p6442_map_io(void);
-extern void s5p6442_init_clocks(int xtal);
-
-#define s5p6442_init_uarts s5p6442_common_init_uarts
-
-#else
-#define s5p6442_init_clocks NULL
-#define s5p6442_init_uarts NULL
-#define s5p6442_map_io NULL
-#define s5p6442_init NULL
-#endif
extern struct sysdev_class s3c6410_sysclass;
extern struct sysdev_class s3c64xx_sysclass;
extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5p6442_sysclass;
extern struct sysdev_class s5pv210_sysclass;
extern struct sysdev_class exynos4_sysclass;
#include <plat/regs-serial.h>
-/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
extern struct platform_device exynos4_device_pd[];
extern struct platform_device exynos4_device_ahci;
-extern struct platform_device s5p6442_device_pcm0;
-extern struct platform_device s5p6442_device_pcm1;
-extern struct platform_device s5p6442_device_iis0;
-extern struct platform_device s5p6442_device_iis1;
-extern struct platform_device s5p6442_device_spi;
-
extern struct platform_device s5p6440_device_pcm;
extern struct platform_device s5p6440_device_iis;
#define S3C64XX_UINTSP 0x34
#define S3C64XX_UINTM 0x38
-/* Following are specific to S5PV210 and S5P6442 */
+/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
#define S5PV210_UCON_PCLK (0<<10)
#define S5PV210_UCON_UCLK (1<<10)
extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
#endif /* __S3C64XX_PLAT_SPI_H */
void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
{
struct platform_device *pdev;
+ struct atmel_uart_data *pdata;
switch (hw_id) {
case 0:
data->regs = (void __iomem *)pdev->resource[0].start;
}
- pdev->id = line;
+ pdata = pdev->dev.platform_data;
+ pdata->num = portnr;
at32_usarts[line] = pdev;
}
#define ATMEL_USART_CLK 0x04
struct atmel_uart_data {
+ int num; /* port num */
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
memblock_init();
#ifdef CONFIG_OF
#include <asm/bootinfo.h>
-/* which is compatible with the flattened device tree (FDT) */
-#define cmd_line arcs_cmdline
-
extern int early_init_dt_scan_memory_arch(unsigned long node,
const char *uname, int depth, void *data);
* device-tree, including the platform type, initrd location and
* size, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline);
+
/* Scan memory nodes */
of_scan_flat_dt(early_init_dt_scan_root, NULL);
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
*/
- of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL);
+ of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
/* Scan memory nodes and rebuild MEMBLOCKs */
memblock_init();
if (ret)
goto err_out;
+ /* Hard-coded primecell ID instead of plug-n-play */
+ if (dev->periphid != 0)
+ goto skip_probe;
+
/*
* Dynamically calculate the size of the resource
* and use this for iomap
if (ret)
goto err_release;
+ skip_probe:
ret = device_add(&dev->dev);
if (ret)
goto err_release;
* is asserted (likewise for RX)
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
*/
struct variant_data {
unsigned int clkreg;
unsigned int fifohalfsize;
bool sdio;
bool st_clkdiv;
+ bool blksz_datactrl16;
};
static struct variant_data variant_arm = {
.st_clkdiv = true,
};
+static struct variant_data variant_ux500v2 = {
+ .fifosize = 30 * 4,
+ .fifohalfsize = 8 * 4,
+ .clkreg = MCI_CLK_ENABLE,
+ .clkreg_enable = MCI_ST_UX500_HWFCEN,
+ .datalength_bits = 24,
+ .sdio = true,
+ .st_clkdiv = true,
+ .blksz_datactrl16 = true,
+};
+
/*
* This must be called with host->lock held
*/
blksz_bits = ffs(data->blksz) - 1;
BUG_ON(1 << blksz_bits != data->blksz);
- datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
+ if (variant->blksz_datactrl16)
+ datactrl = MCI_DPSM_ENABLE | (data->blksz << 16);
+ else
+ datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
if (data->flags & MMC_DATA_READ)
datactrl |= MCI_DPSM_DIRECTION;
},
{
.id = 0x00480180,
- .mask = 0x00ffffff,
+ .mask = 0xf0ffffff,
.data = &variant_ux500,
},
+ {
+ .id = 0x10480180,
+ .mask = 0xf0ffffff,
+ .data = &variant_ux500v2,
+ },
{ 0, 0 },
};
pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
- if (depth != 1 ||
+ if (depth != 1 || !data ||
(strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
return 0;
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
- strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
#ifndef CONFIG_CMDLINE_FORCE
if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
#endif
- strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+ strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
- pr_debug("Command line is: %s\n", cmd_line);
+ pr_debug("Command line is: %s\n", (char*)data);
/* break now */
return 1;
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
port->fifosize = 1;
- port->line = pdev->id;
+ port->line = data->num;
port->dev = &pdev->dev;
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
return __nr_to_section(pfn_to_section_nr(pfn));
}
+#ifndef CONFIG_HAVE_ARCH_PFN_VALID
static inline int pfn_valid(unsigned long pfn)
{
if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
return 0;
return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
}
+#endif
static inline int pfn_present(unsigned long pfn)
{
config SND_SOC_SAMSUNG
tristate "ASoC support for Samsung"
- depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_EXYNOS4
+ depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
select S3C64XX_DMA if ARCH_S3C64XX
select S3C2410_DMA if ARCH_S3C2410
help
config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM8580
select SND_SAMSUNG_I2S
help
int ret;
char *str;
- if (machine_is_smdkc100() || machine_is_smdk6442()
+ if (machine_is_smdkc100()
|| machine_is_smdkv210() || machine_is_smdkc110()) {
smdk.num_links = 3;
/* Secondary is at offset SAMSUNG_I2S_SECOFF from Primary */
projects / karo-tx-linux.git / commitdiff